Error creating EO- The specified schema object is not an existng object

hi,
I am getting an error "The specified schema object is not an existing object .Please un check Exisiting Object or select an exisiting object" while creating an EO.
Does any one knows how to get rid of it.
Thanks,
Murlai

Hello
Looks like this is an old thread, but since I had the same problem and figured it out, I though I'll share it here:
What I figured is that in the Select Schema Object wizard, if I prefix the schema object with the schema name, then the attributes are fetched from the database. like this:
dbo.employeeinstead of this:
employeewhich is kind of strange because the schema is already mentioned in the database schema section and jdeveloper fills the object value after we choose it.
Good luck

Similar Messages

Creating EO: The specified schema object name is not an existing object.

Hi Experts,
I am Using Jdev 11.1.2.2
I am connecting to Mysql DB, When am creating a EO with in the same schema, am getting following error:
The specified schema object name is not an existing object. Unselect Existing Object or enter an existing schema object.in jdev
If i unchecked the existing schema its creating empty eo, it is unable mapping the attributes. So how can resolve it.
Pl help out me.
Best Regards
Bittu.

try prefixing the objectName with the schemaName when you create the EO in mySQL , as mentioned at end of this thread -
Error creating EO- The specified schema object is not an existng object

Error (Data mining): The specified mining structure does not contain a valid model for the current task.

I'm trying to run the Cross validation report on a mining structure that contains just Microsoft Association Rules mining model. In Target Attribute, I've tried:
Actual(Service Description).SE value
Actual([Service Description]).[SE value]
Actual(Service Description)
Actual([Service Description])
just because i don't know what is the exact correct format, but none of them worked, and I always get the following error:
Error (Data mining): The specified mining structure does not contain a valid model for the current task.
the following is my mining model structure

Association rules does not allow for cross-validation
Mark Tabladillo PhD (MVP, SAS Expert; MCT, MCITP, MCAD .NET) http://www.marktab.net

Error in MMPV-The specified year 2007 is not the current calendar year

Hi,
Warning Error in MMPV-The specified year 2007 is not the current calendar year
When I press ok, still the error is coming again.
Regards,
somiraghu

hi,
Do check the last period at OMSY...
If its 12 2006,
Then go to MMPV..
Enter 01 2007...
Press the execute button...
system show the warning message...
then press the outer execute button..
system will show you the log..
Then again go to OMSY and check the changes...
Go on opening till you reach the current one..
From FI side you can open the periods via OB52...
Regards
Priyanka.P

REP-52005: The specified key rep_drill does not exist in the key map file.

Hi
I am using Forms and reports version 11.1.1.4.0
Weblogic 10.3
I wanted to create a drilldown report
I have modified the cgicmd.dat file in the below location
C:\ORACLE\Middleware\user_projects\domains\CL2DOMAIN\config\fmwconfig\servers\WLS_REPORTS\applications\reports_11.1.1.2.0\configuration\cgicmd.dat
by adding the below line to the end
rep_drill: userid=JOE/JOE123@JOEDB server=rep_wls_reports_dsv-002_2inst desformat=pdf destype=cache paramform=no %*
restarted the reports server
In CUSTOMERS.RDF I have placed a link on the customer field using the below code
SRW.SET_HYPERLINK_ATTRS('TARGET="_new"');
SRW.SET_HYPERLINK('http://192.168.1.1:9002/reports/rwservlet?rep_drill+report='||'CUSTOMERS.rep+P_CUCODE='||CHR(39)||:CS_CUSTOMER||CHR(39));
There are so many parameters passing to the report JOBS.RDF
When I run the report and click on the link it gives me an error
"REP-52005: The specified key rep_drill does not exist in the key map file."
When I replace the rep_drill in the link with
userid=JOE/JOE123@JOEDB+server=rep_wls_reports_dsv-002_2inst+desformat=pdf+destype=cache+paramform=no
the report work perfect
Can somebody help me please

I said
REPORTS_URL value:
http://appserver4.rockefeller.edu:7777/reports/rwservlet?report=
It looks like you did the following:
REPORTS_URL value:
http://appserver4.rockefeller.edu:7777/reports/rwservlet?report=test.rdf
Try removing the test.rdf.
Anton
p.s. If you want some detailed help with integrating Apex and Reports, you can contact me offline here: http://concept2completion.net/c2/f?p=9876:20

11gR2- REP-52005: The specified key userlogin does not exist in the key map file.

hi,
i am getting this error "REP-52005: The specified key userlogin does not exist in the key map file." when running report using url
http://myserver.com/reports/rwservlet?userlogin&report_server&report=myreport.jsp....
i have added the key mapping entry in cgicmd.dat file with the name userlogin
as
userlogin: userid=scott/tiger@devdb %*
report_server: server=cluster_reports %*
but still this error,

uncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
then for development set
reloadkeymap=yes (same file - rwservlet.properties).
Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
(For * production* may be you want to set reloadkeymap=no once all testing is done)
see cgicmd.dat for many examples of using keymap file
[ All Docs for all versions ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i/10g ]
9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
http://www.oracle.com/technology/products/forms/techlisting10g.html
---------------------------------------------------------------------------------

The specified year 2011 is not the current calendar year 2012 in MM?

Hi,
when I am doing the MIGO transaction i am getting the error like this, The specified year 2011 is not the current calendar year 2012
I gone throught the t coded like: MMPV, MMRV, OMSY, OB52
As per my company, fiscal yerar is v3 (Apr - Mar)
So now i am in posting period 10(Jan)
And my OB52 settings are       1-2011-12-2011-13-2011-16-2011
In OMSY       2012-10-2012-9-2011-12
Here system displays as my fiscal year is 2012 and last FY is 2011.
I can't find out the mistake where it was. As a FI guy I know there is no mistake in FI side.
IN MMRV
Current period            10 - 2012
Previous period          09 - 2012
Last period in last Fy 12 - 2011
When i am trying to chage the last FY in OMSY, it is grayed out. I reveiwed some of the threads and based on that i was removed my Plants in OX18 also.
Pls guide me how to slove this..
Regards,
Gamidii

Hi,
OMSY cannot be modified because plants are configured with the Company code.
First you need to unmap the plant with company code. Go to OX18 and delete the plants which have been mapped with your company code.
Then change the OMSY period. Once you have changed the period, map the plants with company code in the OX18.
And go to OMWD and assign Valuation grouping code for all the plants as "0001".
Please try it out in Quality server. Thanks.
Regards,
Vijay N

ORA-20100: AppDomain could not be created for the specified security level

We recently updated our development environment to Visual Studio 2010. We have previously deployed (with success) .Net stored procedures from Visual Studio 2005 to our Oracle 10gR2 database. I am currently trying to configure a local instance (called local) of Oracle 10gR2 database to test deployment of .Net stored procedures to Oracle 10gR2 via Visual studio 2010 and ODT version 11.2.0.1.2. I have built the demo from the ode developer guide and gotten as far as deploying it but executing the stored procedures from VS 2010 or SQL*Plus produces the following error...
ORA-20100: AppDomain could not be created for the specified security level
ORA-06512: at "SYS.DBMS_CLR", line 152
ORA-06512: at "SCOTT.GETDEPTNO", line 7
Here is what I have done.
(Server)
1. Installed oracle 10gR2 with ODE.Net
2. Installed Oracle 10gR2 patch set 22
3. Installed ODE upgrade from Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21
(Client)
4. Installed Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21 (In new client home).
5. Installed patch set 22 on 10g client home.
6. Installed Oracle 11g Release 2 ODAC 11.2.0.1.2 with Oracle Developer Tools for Visual Studio(in new 11g client home, only for VS 2010)
I have made some minor changes (GAC) etc. per the following threads...
ODE.NET 11.1.0.7.20 on 10g Database?!
Re: Error: System.TypeInitializationException
The database appears to be fully functional via TOAD - SQL plus etc. I can't find much on this error but it appears Oracle needs some permissions to launch an ASP.Net application that it does not have. Any help would be GREATLY appreciated, don't hesitate to ask for additional details.

The KB article is almost what we have apart from theitalic underlined
part
Consider the following scenario:
You use a domain administrator account to log on to a computer that is running Windows 7 or Windows Server 2008 R2.
You use the Active Directory Users and Computers Microsoft Management Console (MMC) snap-in to connect to a domain controller.
You open the Properties dialog box of a user account.
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
You set the Remote Desktop Services Home Folderattribute to the shared folder path.
NoteThis attribute is located on the
Remote Desktop Services Profiletab.
You click Apply or OK.
In this scenario, you receive the following error message:
The home folder could not be created because: The network name cannot be found.
Note If you click Apply or OK again, no error message is returned. However, the setting is not saved.
I think the important bit is
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
We manually create the shares on our NAS and then just want to enter the path in the profile tab, I suppose the question is how to we stop it trying to create the shares ?

Error occured in deployment step 'Add Solution': Error: Cannot add the specified assembly to the global assembly cache

hi,
I have created a separate project which contains a class which has some generic methods- its a Utility class.[ its a class library project ]
I added this dll into my SharePoint project's wsp package [package--> advanced-->add assembly project from output ] [ SP 2013/ VS 2012]
So till yesterday everything was working fine, its has successfully deployed in the GAC.
But today when I tried to deploy my solution I got this error
"Error occured in deployment step 'Add Solution': Error: Cannot add the specified assembly to the global assembly cache" .
I closed the VS and did iisreset , and uninstalled dll using powershell . and i went to package removed the dll from the wsp package and deployed again.
Now when i added the dll into this package again, it failed to deploy.
can anyone tell , why this is happening. i have not done any changes in the dll yesterday or today.
suddenly , it started behavin stranegly.

Use the power shell command to delete dll
http://www.c-sharpcorner.com/uploadfile/anavijai/how-to-install-or-uninstall-dll-in-gac-using-powershell/

Cannot optimize volume - Receive error "The specified extrinsic Method does not exist"

When I try to optimize a volume on a server running Windows Server 2012 (R1). I receive the below error. This volume is an ISCSI target to our Compellent SAN. Other Servers don't have an issue with volumes created on the same SAN and I have already ran ChkDsk
and it returned no errors. Oddly enough I can run a "Defrag T: /D" but a "Defrag T: /O" returns
"Incorrect Function. (0x80070001)" (Incidentally an "Optimze-Volume T -Defrag" also works)
Any Ideas? I'm stumped!
Command:
Optimize-Volume -DriveLetter T -Verbose
Error:
VERBOSE: Invoking slab consolidation on iSCSI_SAN01_ExchLogFiles (T:)...
VERBOSE: Slab Analysis: 100% complete.
optimize-volume : The specified extrinsic Method does not exist.
At line:1 char:1
+ optimize-volume -DriveLetter T -Verbose
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : MetadataError: (MSFT_Volume (Ob...2-a802-ba7e...):ROOT/Microsoft/...age/MSFT_Volume) [Optimize-Volume], CimException
+ FullyQualifiedErrorId : MI RESULT 17,Optimize-Volume

I did stumble upon that article as well and working through it didn't help. This is an Exchange 2013 server but I wouldn't think that that would exclusively cause a problem like this (unless there is something under the hood that Exchange 2013 is secretly
doing). The C drive is for the OS, the M drive is for the Exchange DB, and the
T drive is for the Logs. The C drive is "directly" connected and the M and T drives are on the same SAN (different LUNs) via iSCSI. This is running as a virtual guest on VMWare ESXi v5.5. I have other servers setup the
same way (not Exchange servers though) with drives on the iSCSI SAN and there are no issues when I run those Optimize-Volume commands. Here is some more output from the console:
PS C:\Users\administrator> Optimize-Volume -DriveLetter T -Analyze -Verbose
VERBOSE: Invoking slab consolidation on iSCSI_SAN01_ExchLogFiles (T:)...
VERBOSE: Slab Analysis: 0% complete...
Optimize-Volume : The specified extrinsic Method does not exist.
At line:1 char:1
+ Optimize-Volume -DriveLetter T -Analyze -Verbose
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : MetadataError: (MSFT_Volume (Ob...2-a802-ba7e...):ROOT/Microsoft/...age/MSFT_Volume) [Optimize-Volume], CimException
+ FullyQualifiedErrorId : MI RESULT 17,Optimize-Volume
PS C:\Users\administrator> Optimize-Volume -DriveLetter M -Analyze -Verbose
VERBOSE: Invoking slab consolidation on iSCSI_SAN01_ExchMailStoreDB (M:)...
VERBOSE: Slab Analysis: 0% complete...
Optimize-Volume : The specified extrinsic Method does not exist.
At line:1 char:1
+ Optimize-Volume -DriveLetter M -Analyze -Verbose
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : MetadataError: (MSFT_Volume (Ob...2-93f1-0050...):ROOT/Microsoft/...age/MSFT_Volume) [Optimize-Volume], CimException
+ FullyQualifiedErrorId : MI RESULT 17,Optimize-Volume
PS C:\Users\administrator> Optimize-Volume -DriveLetter C -Analyze -Verbose
VERBOSE: Invoking analysis on (C:)...
VERBOSE: Analysis: 0% complete...
VERBOSE: Analysis: 22% complete...
# ... Repeated ...
VERBOSE: Analysis: 94% complete...
VERBOSE: Analysis: 99% complete...
VERBOSE: Analysis: 100% complete...
VERBOSE: Analysis: 100% complete.
VERBOSE:
Post Defragmentation Report:
VERBOSE:
Volume Information:
VERBOSE: Volume size = 84.48 GB
VERBOSE: Cluster size = 4 KB
VERBOSE: Used space = 63.18 GB
VERBOSE: Free space = 21.29 GB
VERBOSE:
Fragmentation:
VERBOSE: Total fragmented space = 4%
VERBOSE: Average fragments per file = 1.23
VERBOSE: Movable files and folders = 153593
VERBOSE: Unmovable files and folders = 6
VERBOSE:
Files:
VERBOSE: Fragmented files = 2745
VERBOSE: Total file fragments = 35394
VERBOSE:
Folders:
VERBOSE: Total folders = 4819
VERBOSE: Fragmented folders = 2
VERBOSE: Total folder fragments = 2
VERBOSE:
Free space:
VERBOSE: Free space count = 74005
VERBOSE: Average free space size = 296.00 KB
VERBOSE: Largest free space size = 409.42 MB
VERBOSE:
Master File Table (MFT):
VERBOSE: MFT size = 308.00 MB
VERBOSE: MFT record count = 315391
VERBOSE: MFT usage = 100%
VERBOSE: Total MFT fragments = 4
VERBOSE: Note: File fragments larger than 64MB are not included in the fragmentation statistics.
VERBOSE:
You do not need to defragment this volume.

Script error line 2053 the specified module could not be found URL res://ieframe.dll/preview.js

Script error line 2053 the specified module could not be found URL res://ieframe.dll/preview.js

The issue is caused when Windows creates the printer profile in the control panel that it doesn't correctly create it with the drivers.
We're not going to completely uninstall all the HP software, instead we're going to remove the corrupt Windows printer profile and reinstall it. Total time for this on an average computer is about 5-10 minutes to completely repair (including reboot).
1) Navigate to Start Menu > Devices and Printers or Start Menu > Control Panel > Printers
2) Select each printer profile for the printer with an issue, then select remove device/printer.
3) Reboot
4) Navigate to Start Menu > All Programs > HP > insert model # here > Add Printer (or Setup Wizard)
5) Follow the setup prompts to reinstall the printer profile and it recreates the Windows printer.
6) Run the HP Update Tool from Start Menu > All Programs > HP if your printer installs it, rebooting afterwards if necessary.
7) Test by printing google.com (uses very little ink when the test page comes out).
Let me know if you have any questions or issues.
Thanks,
Dan
I work for an internation tech company and personally perform thousands of computer repairs a year. I'm based out of the US working for a US company, and have been working on computers for over 13 years.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

How to synchronize test schema objects with the prod schema objects.

Hi,
I have a requirement of synchronizing test schema objects with the production schema objects. Please let me know the below
1. if there is a standardized method for such activity,
2. if there are oracle utilities for this task.
3. If i had to do this job manually, can you let me know the check list if any.
Thanks
Purushotham M

http://www.oracle.com/technetwork/issue-archive/2012/12-sep/o52sqldev-1735911.html
You could try database diff tool in sql developer(but there are some licence restrictions).
I don't know your database version, you could try DBMS_COMPARISON package also.
Look at this link http://docs.oracle.com/cd/B28359_01/appdev.111/b28419/d_comparison.htm
Other solution is to create db link between test and production database, and then you can try different types of queries like
select table_name from user_tables
minus
select table_name from user_tables@db_link_to_other_database
And you can do this for columns, indexes and so on.
But you must have proper DDL scripts for this, to generate sync script.
Also there is a question about work process, you are doing sync in reverse order(from production to test). Test db is for test, after test you go to production db with proper ddl and dml scripts, so these schemas shouldn't be different in the first place(talking about schema, not data here).

A sporadic compile error vbc : error BC31019: Unable to write to output file 'D:\Revit\Dev32\RevitAdditions\Source\..\Intermediate\ReleaseWin32\VBNETSnippets\VBNETSnippets.dll': The specified image file did not contain a resource section.

Hi,
This is developer from Autodesk. We get this compile error from time to time. This is a sporadic failure. We can't find any issue in our own project.
vbc : error BC31019: Unable to write to output file 'D:\Revit\Dev32\RevitAdditions\Source\..\Intermediate\ReleaseWin32\VBNETSnippets\VBNETSnippets.dll': The specified image file did not contain a resource section.
I find a help doc from the website to try some steps to solve this issue.
Error ID: BC31019
To correct this error
Compile the program again to      see if the error recurs.
If the error continues, save      your work and restart Visual Studio.
If the error continues, restart      the computer.
If the error recurs, reinstall      Visual Basic.
If the error persists after      reinstallation, notify Microsoft Product Support Services.
My question is what the root cause for this issue. Could you please give us some explanation where the issue should be, VB compiler? .Net Framework?
Visual Studio? Operating system?
Thanks
Wilson

Hi hitzwx,
Thank you for posting in MSDN forum.
Since this forum is to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System, and Visual Studio Editor.
Based on your issue, I am not sure what the root cause for this issue. But I suggest you can try some suggestions so that narrow down this issue.
(1) I suggest you try to create a new simple VB project and then check this issue.
(2) In addition, maybe you see the document about your issue. If possible, I suggest you can try these suggestions to troubleshooting this issue.
https://msdn.microsoft.com/en-us/library/85s7w197.aspx
>>Unable to write to output file 'D:\Revit\Dev32\RevitAdditions\Source\..\Intermediate\ReleaseWin32\VBNETSnippets\VBNETSnippets.dll': The specified image file did not contain a resource section.
In addition, I suggest you can check if the specified image file in the output folder or you can try to click your image file in the Solution Explorer-> select the Copy to Output Directly properties->Copy always check this issue again.
If you have any update message about your issue, please tell me.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

RDS Gateway + Smart Card Error [ The specified user name does not exist.]

I have the following Windows Server 2008 R2 servers:
addsdc.contoso.com, AD DS Domain Controller for contoso.com
adcsca.contoso.com, AD CS Enterprise CA, CDPs/AIAs published externally.
fileserver.contoso.com, RDS Session Host for Administration enabled
rdsgateway.contoso.com, RDS Gateway enabled
tmgserver.contoso.com, 'Publishing' rdsgateway.contoso.com but with pass-through authentication
And the following Windows 7 PCs:
internalclient.contoso.com
externalclient.fabrikam.com
There's no trust between the domains, the external client is completely separate on the internet but the CA certificate for contoso.com has been installed in the trusted Root CA store. All servers have certificates for secure RDP.
I enrolled for a custom 'Smart Card Authentication' certificate with Client Authentication and Smart Card Logon EKUs from the CA, stored on my new Gemalto smart card using the Microsoft Base Smart Card CSP.
From internalclient.contoso.com, I can RDP to fileserver.contoso.com
using the smart card just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using a username and password just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using the smart card to authenticate to the gateway, and a username and password to authenticate to the end server, just fine.
BUT from when using a smart card to authenticate to the end server via the gateway, it fails with:
The specified user name does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support.
When I move the client into the internal network and try the connection again (still via the RDS Gateway), it works fine - the only thing I can think of is being outside the network and not being able to contact the AD DS DC for Kerberos is causing the issue
- but I'm pretty sure this is a supported scenario?
The smart card works fine internally, the subject of the certificate is the user's common name (John Smith) and the only SAN is
[email protected] which matches the UPN of the user account as it was auto-enrolled.
Does anyone have any ideas?

I had a similar issue where I am using a smart card through a Remote Desktop Gateway. I had to disable Network Level Authentication (NLA) on the destination Remote Desktop Server. If anyone has another way around this, I'd appreciate hearing it. I'd prefer
to use NLA.

Error while executing the Job for Objects :null Batch Risk Analysis

Hi All,
We've recently upgraded Virsa to version 5.3_14 . I'm encountering a problem when executing the Batch Risk Analysis job for users, roles and profiles. The job does not complete for some objects and it seems to be sporadic and shows this error: -
Background Job History: job id=395, status=2, message=Error while executing the Job for Object(s) :ABROWN:null
I've attached the log for your review.
Thanks in advance for your help.
Linda Lewis
Feb 9, 2011 1:47:53 PM com.virsa.cc.xsys.meng.ObjAuthMatcher <init>
FINEST: ObjAuthMatcher constructed: 4ms, #singles=2141, #ranges=0, #super=0
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.riskanalysis.AnalysisEngine riskAnalysis
WARNING: Job ID:395 : Failed to run Risk Analysis
java.lang.StringIndexOutOfBoundsException at java.lang.String.substring(String.java:1019)
at com.virsa.cc.xsys.util.RuleLoader.getPermRule(RuleLoader.java:573)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1609)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:321)
at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchRiskAnalysis(BatchRiskAnalysis.java:1166)
at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1464)
at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:560)
at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:363)
at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:375)
at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:92)
at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:444)
at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1236)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:332)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:207)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock lock
FINEST: Lock:1004
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock unlock
FINEST: Unlock:1004
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchRiskAnalysis
WARNING: Error: while executing BatchRiskAnalysis for JobId=395 and object(s):ABROWN: Skipping error to continue with next object: null Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
2@@Msg is Error while executing the Job for Object(s) :ABROWN:null
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO: -
Background Job History: job id=395, status=2, message=Error while executing the Job for Object(s) :ABROWN:null
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock lock
FINEST: Lock:1004
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock unlock
FINEST: Unlock:1004
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchRiskAnalysis
INFO: --- BKG User Permission Analysis (System: P20:020) completed --- elapsed time: 4522 ms
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock lock
Edited by: Linda Lewis on Feb 9, 2011 9:08 PM

Hi,
Was a solution found for this error?
Thanks,
Glen

Error creating EO- The specified schema object is not an existng object

Similar Messages

Maybe you are looking for