Error :DB Instance CreateObject
Hello all,
when i accessing live cache.
so i am getting the DB Instance CreateObject
error.
Error : Connect timeout
Error Message : Could not connect within 25 seconds
please assist for this.
Atul jain
Hello Atul jain,
"when i accessing live cache."
=> Could you please update the thread with additional information:
What transaction did you run to access the live cache?
Are you running on SCM system? What version?
What is the version/SP of the SAP Basis on your system?
What is the version/type of the database on your system?
What is the version of SAP kernel?
What OS do you have on the application server?
Thank you and best regards, Natalia Khlopina
Similar Messages
-
Error DBMRfcCommuncicationError at DB Instance CreateObject
Hello!
I would like to set up the MTE MaxDB to monitor the SAP DB from SAP Solution Manager.
If Itry to execute DB50 --> Properties I get the error "DBM_CONNECT".
Error DBMRfcCommuncicationError at DB Instance CreateObject
How can i activate the MTE MaxDB?
The DB59 returns the following information:
1. Connect. test with "dbmcli db_state" Unsuccessful
dbmcli_command_execute_error
External program terminated with exit code 128
2. Connect. test with command mode "dbmrfc db_state" Unsuccessful
system_failure
Name and Server : <server-name>
DBMRFC Function : DBM_EXECUTE
Command : db_state
Error : System Error
Error Message : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'#Timeout d
3. Connect. test with session mode "dbmrfc db_state" Unsuccessful
communication_failure
Name and Server : <server-name>
DBMRFC Function : DBM_CONNECT
Error : Communication Error
Error Message : Error when opening an RFC connection
4. Connect. test with "native SQL" ( SRM ) Unsuccessful
For detailed information, see the developer trace for work process: 3
Thank you very much!
regardsHello!
Thank you for your response!
The execution of "dbmcli" with additional parameters "-s dbm_version" retrieves
"External program terminated with exit code 128"
How can I check whether I have or not the DB client?
What is the URL-destination I can download DB client software?
The dev_cp File from ST11 retrieves
RSTR0006: Display Developer Traces 1
Trace file of control program (trace level 3)
< Function: BtcTrcInit> Function: main SAPXPG 700
2007-09-25 14-43-47 : Before BtcXpgDetach
> Function: BtcXpgDetach < Function: BtcXpgDetach Accept RFC connection from R/3 system
2007-09-25 14-43-47 : Before RfcAccept
2007-09-25 14-43-47 : RfcAccept returned OK
security check switched OFF
Install RFC call SAPXPG_START_XPG
Install RFC call SAPXPG_START_XPG_LONG
Install RFC call SAPXPG_END_XPG
Wait for RFC call SAPXPG_START_XPG or SAPXPG_START_XPG_LONG
2007-09-25 14-43-47 : Before first call of RFCDispatch
> Function: BtcXpgStartXpgLong
2007-09-25 14-43-47 : Beginning of BtcXpgStartXpgLong
> Function: BtcXpgStartXpgImportLong > Function: BtcXpgParam < Function: BtcXpgParam > Function: BtcXpgParam < Function: BtcXpgParam > Function: B
Line Text
<No StdOut/StdErr output reported>
Target log table is not identical to source
ItGetLine terminated with NULL
< Function: BtcXpgItTransfer > Function: BtcTrcReset < Function: BtcTrcReset Call mode: VIA RFC
Input arguments of BtcXpgStartXpg:
External program: dbmcli
Program argument string:
Contents of control flags:
StdIn control flag: redirect StdIn
Thank you for your futher information in advance!
Thom -
DBA Cockpit - Error RC=16 at DB Instance CreateObject
Hi Guys,
I just started learning SAP Netweaver and got problem/error when i executed Tcode DB13, below the error details:
System: NSP
DB System: MaxDB/LiveCache
DB Release: 7.6.00.028
Schema Name: SAPNSP
O/S : Windows XP
Error details
NSP- Other Error RC=16 at DB Instance CreateObject
An Error Occured when processing system NSP
Error in "CL_DB6_TREE_NAVIGATOR====== CP CL_DB6_TREE_NAVIGATOR===CM012' With return code system not reached
NSP - Check the system registration.
I tried Tcode DB59, and did 'Connection Test', and the log file is here:
Application Server: Host_Name
1. Connect. test with "dbmcli db_state" Unsuccessful
dbmcli_command_execute_error
Error! Connection failed to node PWDF2788 for database NSP:
unknown host name
External program terminated with exit code 2
2. Connect. test with command mode "dbmrfc db_state" Unsuccessful
dbm_system_error
Name and Server : NSP - PWDF2788
DBMRFC Function : DBM_EXECUTE
Command : db_state
Error : DBM Error
Return Code : -4
Error Message : unknown host name
3. Connect. test with session mode "dbmrfc db_state" Unsuccessful
dbm_system_error
Name and Server : NSP - PWDF2788
DBMRFC Function : DBM_CONNECT
Error : DBM Error
Return Code : -4
Error Message : unknown host name
4. Connect. test with "native SQL" ( NSP ) Unsuccessful
For detailed information, see the developer trace for work process:
Please help and advice. Thankyou so much.
FerryHi Markus,
I already run tcode DB59 and the configuration looks fine.
Name of Database Connection : NSP
Database Type : MaxDB
Name of Database: NSP
Database Server: FWILSON
Central Authorization X
Monitoring Using Alert Monitor X
Integration Data @01\QIntegration data complete@
Last Changed On 01.11.2008
Last Changed At 15:21:25
Last Changed By SAP*
And i did connection test but still failed/error as below:
Application Server: FWILSON_NSP_00 ( Windows NT )
1. Connect. test with "dbmcli db_state" Unsuccessfu
dbmcli_command_execute_error
Error! Connection failed to node FWILSON for database NSP:
-24950,ERR_USRFAIL: User authorization failed
External program terminated with exit code 2
2. Connect. test with command mode "dbmrfc db_state" Unsuccessfu
dbm_system_error
Name and Server : NSP - FWILSON
DBMRFC Function : DBM_EXECUTE
Command : db_state
Error : DBM Error
Return Code : -2
Error Message : ERR_USRFAIL: User authorization failed#
3. Connect. test with session mode "dbmrfc db_state" Unsuccessfu
dbm_system_error
Name and Server : NSP - FWILSON
DBMRFC Function : DBM_CONNECT
Error : DBM Error
Return Code : -2
Error Message : ERR_USRFAIL: User authorization failed#
4. Connect. test with "native SQL" ( NSP ) Unsuccessfu
For detailed information, see the developer trace for work process:
Anything i should do to solve this problem?
Or just simply reinstall the Database?
Thanks alot.
Edited by: Ferry Wilson on Nov 1, 2008 2:39 PM -
IDoc failed with the error massaeg "Instance of object type could not be ch
Hi All
I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
Message type :PORDCR
Basic type : PORDCR05
Message no. BAPI003
Status : 51
All POs are get uploaded in SAP during Cut over activities only.
Please suggest on this.It will be a great help.
Thanks
AjitHi
After uploading POs into SAP we are changing quantity and value in PO in Legacy system, and for this all IDocs are failed, subsequently these changes are not triggering to ECC.
Please help
Thanks
Ajit -
Error creating instances in Business Process Workspace
i have the following error:
oracle.bpm.web.exception.WapiOperationException: Error creating instance for target process Serv_M/Proj_V!76.0*/EV.
Caused by: BPM-70204
Exception
exception.70204.type: error
exception.70204.severity: 2
exception.70204.name: Error creating process instance.
exception.70204.description: Error creating instance for target process Serv_M/Proj_V!76.0*/EV.
exception.70204.fix: Verify server log to find the problem cause.
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:205)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at oracle.bpm.services.instancemanagement.ejb.InstanceManagementServiceBean_sqa2w0_IInstanceManagementServiceRemoteImpl_1036_WLStub.createProcessInstanceTask(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
at $Proxy413.createProcessInstanceTask(Unknown Source)
at oracle.bpm.papi.ora.util.ApplicationExecution11G.beginExecution(ApplicationExecution11G.java:50)
... 101 more
Caused by: ORABPEL-02023
Cannot activate block.
failure to activate the block "EV" for the instance "30037"; exception reported is: .
This error contained the exceptions thrown by the underlying routing system.
Contact Oracle Support Services. Provide the error message, the composite source and the exception trace in the log files (with logging level set to debug mode).
Help me please!
RegardsHi Chris
If you are trying to create a LOV and use that as a parameter, then you need to create LOV as Dynamic Cascading values. Once created then you can use that LOV in the Crystal Reports.
This is the best way to get dynamic cascading prompts in Crystal reports.
Please refer to Business View Admin guide for more information.
Hope this helps!!
Regards
Sourashree -
Hi Gurus,
I made some changes in rz10 for client copy like:
icm/host_name_full [email protected]
login/accept_sso2_ticket 1
login/create_sso2_ticket 2
icm/server_port_1
PROT=HTTPS,PORT=443$$,PROCTIMEOUT=600,TIMEOUT=600
icm/server_port_0
PROT=HTTP,PORT=80$$,PROCTIMEOUT=600,TIMEOUT=600
login/no_automatic_user_sapstar 0
After to make changes effective, i stopsap & startsap.
But unfortunately db is not coming up. I checked startdb.log it showing
error as " ASE instance not available
*** ERROR:ASE instance possibly left running when system
went down(system crash?).
Notify Database Administrator."
Please help us to resolve this issue, i have also added startdb.log for
your reference.
Regards,
PiyushHi Piyush,
Did you solved this issue.
We are facing the same issue and only this thread is there in SCN for this issue.
If you solved this issue,Kindly share the solution.
Thanks and Regards,
Mathan A -
Error: The instance completed without consuming all of its messages.
Hi,
I have following scenario.
I am processing messages in Sequential way. I have two Orchestration, Orch1 has transformation logic and Orch2 has Sequential processing logic. Orch2 is directly binded with MsgBox and receives the messages persisted by the Orch1 based on correlating property.
I need to sort the message based on ReceivedFileName(which is date time stamp). So In the Orch2, I am receiving all the messages within certain delay say 1min, adding to a List, sorting all the messages based on Filename and then sending to destination location one by one.
Now I am getting one error in Orch2 when the frequency is high. The error says "The instance completed without consuming all of its messages. The instance and its unconsumed messages have been suspended. " I believe the cause could be, when the Orch2 sending one batch of sorted messages then it might have received new messages meanwhile. And so, as the sorted messages are sent the Orch2 instance completes but there are new messages still attached to this Orch instance and thus its suspending.
I am totally not able to figure out how can I avoid this error. Also I don't want to terminate the suspended message(loss of message :().
Thanks in advanceAjeet KumarThanks for Reply.
I tried with this also, but the problem is even if I decide any end point for Convoy, then also I can't stop the Orchestration to not to subscribe new messages during its life time. I will explain this in detail
We can separately divide the Orch2(Order Delivery Orch) functionality into 3 parts and considering time lags.
1) Orch2 receives all the convoy msg from MsgBox say it took time t1(equal to the delay)
2) Not it will sort the messages based on FileName...say this operation took time t2
3) Now I am sending the sorted messages one by one to destination location. Say it took time t3 to send all the messages.
Now, if during the time delays (T2+T3) if any new message comes into Convoy orch, then the instance will suspend with the error "The instance completed without consuming all of its messages. The instance and its unconsumed messages have been suspended. ".
So is there any way to make sure that Convoy Orch does not receive any new msg during time T2+T3.Ajeet Kumar -
WDA Error : An instance of popup view already exists in the application
Dear Experts,
I have used a popup in my WDA application which gets opened on the click of the button. Whenever the application is launched for the first time and when I click on the button to display the pop up I get the error "An instance of popup view already exists in the application"; when I close the application, relaunch it once again and click on the button to open the popup, it works fine. What would be the reason for this behaviour?
My piece of code is as follows,
try.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
CALL METHOD lo_window_manager->CREATE_WINDOW
EXPORTING
WINDOW_NAME = 'POP_UP_QOH'
TITLE = 'Stock Overview'
BUTTON_KIND = IF_WD_WINDOW=>CO_BUTTONS_OK
MESSAGE_TYPE = IF_WD_WINDOW=>CO_MSG_TYPE_NONE
CLOSE_IN_ANY_CASE = ABAP_TRUE
RECEIVING
WINDOW = LO_WINDOW
CALL METHOD LO_WINDOW->OPEN
CATCH CX_WDR_RT_EXCEPTION.
ENDTRY.
Kindly please help to resolve the issue.
Warm Regards,
KanthimathiHi Viji,
I now changed my piece of code as follows,
if lo_window is initial.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
CALL METHOD lo_window_manager->CREATE_WINDOW
EXPORTING
MODAL = ABAP_FALSE
WINDOW_NAME = 'POP_UP_QOH'
TITLE = 'Stock Overview'
CLOSE_BUTTON =
BUTTON_KIND = IF_WD_WINDOW=>CO_BUTTONS_OK
MESSAGE_TYPE = IF_WD_WINDOW=>CO_MSG_TYPE_NONE
CLOSE_IN_ANY_CASE = ABAP_TRUE
RECEIVING
WINDOW = LO_WINDOW
CALL METHOD LO_WINDOW->OPEN
endif.
but still facing the same problem. By the way what does the message type argument mean here?
Regards,
Kanthimathi -
DBW0 - error starting instance
oracle-xe on debian
when I execute /etc/init.d/oraxle-xe start - I get no error message, but no oracle processes are started
see my alert log
paco:/usr/lib/oracle/xe/app/oracle/admin/XE/bdump# more alert_XE.log
Wed Jan 17 14:28:58 2007
Starting ORACLE instance (normal)
Wed Jan 17 14:28:58 2007
WARNING: EINVAL creating segment of size 0x0000000011801000
fix shm parameters in /etc/system or equivalent
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 293601280
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
local_listener = (ADDRESS = (PROTOCOL=TCP) (HOST=paco) (PORT=1528))
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 96731136
PMON started with pid=2, OS id=4040
PSP0 started with pid=3, OS id=4042
MMAN started with pid=4, OS id=4044
Wed Jan 17 14:28:58 2007
Process startup failed, error stack:
Wed Jan 17 14:28:58 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_4037.trc:
ORA-27300: OS system dependent operation:fork failed with status: 0
ORA-27301: OS failure message: Error 0
ORA-27302: failure occurred at: skgpspawn5
Process DBW0 died, see its trace file
USER: terminating instance due to error 443
Instance terminated by USER, pid = 4037
and the trace file
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server
System name: Linux
Node name: paco
Release: 2.6.19.2-vs2.2.0-rc7
Version: #1 SMP Sun Jan 14 17:01:12 CET 2007
Machine: i686
Instance name: XE
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Unix process pid: 4037, image: oracle@paco
KCCDEBUG_LEVEL = 0
Running with 1 strand for Non-Enterprise Edition
Running without dynamic strand for Non-Enterprise Edition
Dynamic strand is set to FALSE
Running with 1 shared and 10 private strand(s). Zero-copy redo is FALSE
*** 2007-01-17 14:28:58.448
Process startup failed, error stack:
ORA-27300: OS system dependent operation:fork failed with status: 0
ORA-27301: OS failure message: Error 0
ORA-27302: failure occurred at: skgpspawn5
*** 2007-01-17 14:28:58.448
KSTDUMP: In-memory trace dump
TIME:SEQ# ORAPID SID EVENT OP DATA
========================================================================
DCCC590F:00000003 39 0 10254 34 KSBS1P: process USER trying to start background PMON
DCCCE78B:0000000E 39 0 10254 40 KSBS1P: spawn succeeded ospid = 4040
DCCCF126:0000000F 39 0 10254 50 KSBS1P: out of loop: process is up and running
DCCCF12D:00000010 39 0 10254 34 KSBS1P: process USER trying to start background TEST
DCCCF12E:00000011 39 0 10254 36 KSBS1P: process TEST already running or not enabled
DCCCF12F:00000012 39 0 10254 34 KSBS1P: process USER trying to start background DIAG
DCCCF130:00000013 39 0 10254 36 KSBS1P: process DIAG already running or not enabled
DCCCF131:00000014 39 0 10254 34 KSBS1P: process USER trying to start background FMON
DCCCF132:00000015 39 0 10254 36 KSBS1P: process FMON already running or not enabled
DCCCF133:00000016 39 0 10254 34 KSBS1P: process USER trying to start background PSP0
DCCD4C91:00000022 39 0 10254 40 KSBS1P: spawn succeeded ospid = 4042
DCCD4CA1:00000023 39 0 10254 50 KSBS1P: out of loop: process is up and running
DCCD4CA4:00000024 39 0 10254 34 KSBS1P: process USER trying to start background LMON
DCCD4CA5:00000025 39 0 10254 36 KSBS1P: process LMON already running or not enabled
DCCD4CA7:00000026 39 0 10254 34 KSBS1P: process USER trying to start background LMD0
DCCD4CA7:00000027 39 0 10254 36 KSBS1P: process LMD0 already running or not enabled
DCCD4CA9:00000028 39 0 10254 34 KSBS1P: process USER trying to start background LMS0
DCCD4CAA:00000029 39 0 10254 36 KSBS1P: process LMS0 already running or not enabled
DCCD4CAB:0000002A 39 0 10254 34 KSBS1P: process USER trying to start background LMS1
DCCD4CAC:0000002B 39 0 10254 36 KSBS1P: process LMS1 already running or not enabled
DCCD4CAD:0000002C 39 0 10254 34 KSBS1P: process USER trying to start background LMS2
DCCD4CAE:0000002D 39 0 10254 36 KSBS1P: process LMS2 already running or not enabled
DCCD4CAF:0000002E 39 0 10254 34 KSBS1P: process USER trying to start background LMS3
DCCD4CB0:0000002F 39 0 10254 36 KSBS1P: process LMS3 already running or not enabled
DCCD4CB1:00000030 39 0 10254 34 KSBS1P: process USER trying to start background LMS4
DCCD4CB2:00000031 39 0 10254 36 KSBS1P: process LMS4 already running or not enabled
DCCD4CB3:00000032 39 0 10254 34 KSBS1P: process USER trying to start background LMS5
DCCD4CB4:00000033 39 0 10254 36 KSBS1P: process LMS5 already running or not enabled
DCCD4CB4:00000034 39 0 10254 34 KSBS1P: process USER trying to start background LMS6
DCCD4CB5:00000035 39 0 10254 36 KSBS1P: process LMS6 already running or not enabled
DCCD4CB6:00000036 39 0 10254 34 KSBS1P: process USER trying to start background LMS7
DCCD4CB7:00000037 39 0 10254 36 KSBS1P: process LMS7 already running or not enabled
DCCD4CB8:00000038 39 0 10254 34 KSBS1P: process USER trying to start background LMS8
DCCD4CB9:00000039 39 0 10254 36 KSBS1P: process LMS8 already running or not enabled
DCCD4CBA:0000003A 39 0 10254 34 KSBS1P: process USER trying to start background LMS9
DCCD4CBB:0000003B 39 0 10254 36 KSBS1P: process LMS9 already running or not enabled
DCCD4CBC:0000003C 39 0 10254 34 KSBS1P: process USER trying to start background LMSa
DCCD4CBD:0000003D 39 0 10254 36 KSBS1P: process LMSa already running or not enabled
DCCD4CBE:0000003E 39 0 10254 34 KSBS1P: process USER trying to start background LMSb
DCCD4CBF:0000003F 39 0 10254 36 KSBS1P: process LMSb already running or not enabled
DCCD4CC0:00000040 39 0 10254 34 KSBS1P: process USER trying to start background LMSc
DCCD4CC1:00000041 39 0 10254 36 KSBS1P: process LMSc already running or not enabled
DCCD4CC2:00000042 39 0 10254 34 KSBS1P: process USER trying to start background LMSd
DCCD4CC3:00000043 39 0 10254 36 KSBS1P: process LMSd already running or not enabled
DCCD4CC4:00000044 39 0 10254 34 KSBS1P: process USER trying to start background LMSe
DCCD4CC5:00000045 39 0 10254 36 KSBS1P: process LMSe already running or not enabled
DCCD4CC7:00000046 39 0 10254 34 KSBS1P: process USER trying to start background LMSf
DCCD4CC7:00000047 39 0 10254 36 KSBS1P: process LMSf already running or not enabled
DCCD4CC9:00000048 39 0 10254 34 KSBS1P: process USER trying to start background LMSg
DCCD4CCA:00000049 39 0 10254 36 KSBS1P: process LMSg already running or not enabled
DCCD4CCB:0000004A 39 0 10254 34 KSBS1P: process USER trying to start background LMSh
DCCD4CCF:0000004B 39 0 10254 36 KSBS1P: process LMSh already running or not enabled
DCCD4CD0:0000004C 39 0 10254 34 KSBS1P: process USER trying to start background LMSi
DCCD4CD1:0000004D 39 0 10254 36 KSBS1P: process LMSi already running or not enabled
DCCD4CD2:0000004E 39 0 10254 34 KSBS1P: process USER trying to start background LMSj
DCCD4CD3:0000004F 39 0 10254 36 KSBS1P: process LMSj already running or not enabled
DCCD4CD5:00000050 39 0 10254 34 KSBS1P: process USER trying to start background LMSk
DCCD4CD5:00000051 39 0 10254 36 KSBS1P: process LMSk already running or not enabled
DCCD4CD7:00000052 39 0 10254 34 KSBS1P: process USER trying to start background LMSl
DCCD4CD8:00000053 39 0 10254 36 KSBS1P: process LMSl already running or not enabled
DCCD4CD9:00000054 39 0 10254 34 KSBS1P: process USER trying to start background LMSm
DCCD4CDA:00000055 39 0 10254 36 KSBS1P: process LMSm already running or not enabled
DCCD4CDB:00000056 39 0 10254 34 KSBS1P: process USER trying to start background LMSn
DCCD4CDC:00000057 39 0 10254 36 KSBS1P: process LMSn already running or not enabled
DCCD4CDD:00000058 39 0 10254 34 KSBS1P: process USER trying to start background LMSo
DCCD4CDD:00000059 39 0 10254 36 KSBS1P: process LMSo already running or not enabled
DCCD4CDF:0000005A 39 0 10254 34 KSBS1P: process USER trying to start background LMSp
DCCD4CDF:0000005B 39 0 10254 36 KSBS1P: process LMSp already running or not enabled
DCCD4CE1:0000005C 39 0 10254 34 KSBS1P: process USER trying to start background LMSq
DCCD4CE2:0000005D 39 0 10254 36 KSBS1P: process LMSq already running or not enabled
DCCD4CE3:0000005E 39 0 10254 34 KSBS1P: process USER trying to start background LMSr
DCCD4CE4:0000005F 39 0 10254 36 KSBS1P: process LMSr already running or not enabled
DCCD4CE5:00000060 39 0 10254 34 KSBS1P: process USER trying to start background LMSs
DCCD4CE6:00000061 39 0 10254 36 KSBS1P: process LMSs already running or not enabled
DCCD4CE8:00000062 39 0 10254 34 KSBS1P: process USER trying to start background LMSt
DCCD4CE9:00000063 39 0 10254 36 KSBS1P: process LMSt already running or not enabled
DCCD4CEA:00000064 39 0 10254 34 KSBS1P: process USER trying to start background LMSu
DCCD4CEB:00000065 39 0 10254 36 KSBS1P: process LMSu already running or not enabled
DCCD4CEC:00000066 39 0 10254 34 KSBS1P: process USER trying to start background LMSv
DCCD4CED:00000067 39 0 10254 36 KSBS1P: process LMSv already running or not enabled
DCCD4CEF:00000068 39 0 10254 34 KSBS1P: process USER trying to start background LMSw
DCCD4CF0:00000069 39 0 10254 36 KSBS1P: process LMSw already running or not enabled
DCCD4CF1:0000006A 39 0 10254 34 KSBS1P: process USER trying to start background LMSx
DCCD4CF2:0000006B 39 0 10254 36 KSBS1P: process LMSx already running or not enabled
DCCD4CF3:0000006C 39 0 10254 34 KSBS1P: process USER trying to start background LMSy
DCCD4CF4:0000006D 39 0 10254 36 KSBS1P: process LMSy already running or not enabled
DCCD4CF6:0000006E 39 0 10254 34 KSBS1P: process USER trying to start background LMSz
DCCD4CF7:0000006F 39 0 10254 36 KSBS1P: process LMSz already running or not enabled
DCCD4CF9:00000070 39 0 10254 34 KSBS1P: process USER trying to start background MMAN
DCCDB8DB:0000007C 39 0 10254 40 KSBS1P: spawn succeeded ospid = 4044
DCCDB8E8:0000007D 39 0 10254 50 KSBS1P: out of loop: process is up and running
DCCDB8ED:0000007E 39 0 10254 34 KSBS1P: process USER trying to start background DBW0
DCCDBD9E:00000080 39 0 10254 51 KSBS1P: out of loop: process did not start
KSTDUMP: End of in-memory trace dump
*** 2007-01-17 14:28:58.449yes, but I'm inside a vserver and the kernel parameters are hidden away from me ... :(
I found this
Database creation failure
If database creation fails, either during install or using dbca, the potential
error/warning is due to some default kernel parameters. The following error
generally indicates a wrong setting for SHMMAX and semaphore parameters.
“WARNING: EINVAL creating segment of size 0x000000000c400000”
Correct values needs to be set for shared memory parameters.
I hope the host server can make the changes ... -
EPMA Deploy Failed - Error : Shared instance of member
Hello Experts,
I have big problem, from time to time, I get shared members on my shared libary even tough I define all members as primary
can any one advice how can I verfiy no shared members loaded to my shared libary?
Thanks
Ido
Error : Shared instance of member ' ' was encountered before the primary instance of the member in dimensionin addition, I just notice that when I import the dim from the interface table wizard, I have option name "If “Allow Overwrites with Blank” which is not selected,
maybe it's has to do with the appreance of the shared members? -
Error Webgate instance already register in Webtier
Hi experts,
when I am deploying the webgate instance in web tier.I am getting this error
"Error Webgate instance already register in Web-tier".
How to re-register the new webgate instance with old web tier ?
Thanks in advance,
Gopi THi,
I think U did something wrong with your configuration.
The error indicate that U 've doulbe instance name in your AS environement.
Can U provide us with more infor. may be I can help?.
Cheers,
Hamdy -
Single Primary Site running SCCM 2012 SP1 with SQL 2008 SP3 CU14 on Windows Server 2008 SP1.
We are in process of upgrading to SCCM 2012 R2.
Ran the ConfigMgr 2012 R2 setup with the /TESTDBUPGRADE on SQL Server.
F:\SMSSETUP\BIN\X64\setup.exe /testdbupgrade
cm_bc1
Error: SQL Instance hosting an active site database, error cannot run Testdbupgrade on a SQL Instance which host an active site database.
We are using s-syscenter account which has SA rights on SQL and added as local admin.You should run Testdbupgrade on a copy of your database (ie a backup) rather than the "live" database.
Note that you cannot upgrade a database once you have run Testdbupgrade on it.
See here for more information
http://technet.microsoft.com/en-us/library/jj865691.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
FJS Error Oracle Instance terminated disconnection forced
Hi Gurus,
Please help me out, i am in installing 4.7 in DB instance i got this error Oracle Instance terminated disconnection forced FJS- 00012 executing script failed
please help me out guys
CheersPlease check the file ora_sql_reesult.log
Also - please post the relevant part of the installation logfile - just the script error message doesn´t help in finding out what the reason is.
Markus -
Error creating instance of class from same package
When I try to create an instance of a class that is in the same package, my IDE indicates that the constructor can not be found. Can anyone tell me what is wrong? Thanks. Below are the codes for both classes:
package com.practice;
import java.applet.*;
import java.awt.*;
import javax.swing.*;
public class WebProject extends Applet{
public void init(){
// The following line is where the IDE indicates there is an error
UserInterface gui = new UserInterface();
} // end init()
public void start(){
} // end start()
public void stop(){
} // end stop()
public void destroy(){
} // end destory()
} // end class
package com.practice;
import java.applet.*;
import java.awt.*;
import javax.swing.*;
public class UserInterface extends Applet{
JPanel menuPanel = new JPanel();
JPanel contentPanel = new JPanel();
JPanel savePanel = new JPanel();
ImageIcon saveIcon = new ImageIcon("workspace/images/toolbarButtongraphics/general/Save24");
JButton saveButton = new JButton("Save", saveIcon);
public UserInterface(){
savePanel.add(saveButton);
setLayout(new BorderLayout());
add(menuPanel, BorderLayout.NORTH);
add(contentPanel, BorderLayout.CENTER);
add(savePanel, BorderLayout.SOUTH);
} // end UserInterface classThanks for the explanation and example. At first, I didn't understand what you were getting at, but after reading "Using Top-Level Containers" and "How to Use Root Panes" java tutorials it made much more sense. Unfortunately, the books I've read up to this point, did not cover those topics at all. The books simply stated that the first step in creating a Swing gui was to extend the JFrame, or JApplet, or etc.
Unfortunately, my original problem persists. I continue to get compile-time errors such as:
TestUserInterface.java:5: cannot find symbol
symbol: class UserInterface
location: class projects.web.TestUserInterface
UserInterface ui = new UserInterface(); Anyone know why?
Both the classes are in the same named packaged. Below is my code:
package projects.web;
import java.awt.*;
import javax.swing.*;
public class UserInterface extends JFrame{
JPanel menuPanel = new JPanel();
JPanel contentPanel = new JPanel();
JPanel selectionPanel = new JPanel();
JButton save = new JButton("Save");
JButton addFiles = new JButton("Add");
public UserInterface(){
super("File Upload");
setSize(500, 500);
menuPanel.add(addFiles);
selectionPanel.add(save);
setLayout(new BorderLayout());
add(menuPanel, BorderLayout.NORTH);
add(contentPanel, BorderLayout.CENTER);
add(selectionPanel, BorderLayout.SOUTH);
} // end constructor
} // end UserInterface class
package projects.web;
public class TestUserInterface{
public static void main(String[] args){
UserInterface ui = new UserInterface();
} // end TestUserInterface class -
Error In Instance Tab of ESB console
Hi all,
After restarting the SOA server,
when i tried opening the 'Instance' Tab i get the following error.
An unhandled exception has been thrown in the ESB system. The exception reported is: "java.lang.NullPointerException at oracle.tip.esb.console.XMLInstanceManagerImpl.getInstances(XMLInstanceManagerImpl.java:104) at oracle.tip.esb.configuration.servlet.command.GetInstancesCommand.execute(GetInstancesCommand.java:81) at oracle.tip.esb.configuration.servlet.CommandServlet.doJob(CommandServlet.java:109) at oracle.tip.esb.configuration.servlet.CommandServlet.doPost(CommandServlet.java:76) at javax.servlet.http.HttpServlet.service(HttpServlet.java:763) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65) at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396) at java.security.AccessController.doPrivileged(Native Method) at javax.security.auth.Subject.doAsPrivileged(Subject.java:517) at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595) ".*.
i do not understand this.
pls help
Thanx in advance
Rahul R Buddala
Edited by: Rahul R Buddala on Feb 4, 2011 3:50 PM
Edited by: Rahul R Buddala on Feb 4, 2011 5:35 PMHi,
I am also receiving the same message. Could you please let me know How did you resolve the issue.
Regards,
Ashish
Maybe you are looking for
-
SRM scenario XI / PI requirements
Hi all, i have a question regarding XI requirements in SRM scenarios. What are the requirements for CLASSIC, EXTENDED CLASSIC, STAND ALONE and DECOUPLED scenarios? Are there standard contents for all of them? I understand that in CLASSIC, the connect
-
Boot camp, "cannot find installation disk."
What do I do? It's a Microsoft download from the MSDN Academic Alliance (Win 7 Prof. 64-bit) and I am getting this error. I downloaded the Win 7 Prof. from Microsoft's MSDN AA site on a PC. Opened boot campo and created the partition and the CD is vi
-
OEM software resellers: to buy or not to buy?
Hi people, this is the point of my situation. On the next year i'll take a degree in IT but i like webdesign, and in the while i'm going to do some pratice with tools as DW, PS. I'm sure in the next future i'll need also AI. The problem is the price:
-
Use IPod Wall Charger with Zen 16
I have been experiencing awful battery life with my 6GB Zen---After three years my Nano still deli'vers 6 hours. This Zen is rated at 25 but I'm lucky to 4 hours. I have been charging it with my Nano charger---is there something wrong with doing that
-
[SOLVED] - Grub Error 15 on Fresh Install
I've created a Boot CD from the archlinux-2011.08.19-core-i686.iso and booted from the CD. I've used both Autoconfig and Manual to set up my 4 Gig USB Flash Drive - /dev/sdb BOOT - /dev/sdb1: UUID="467fc66a-6c36-48ab-a7f3-69f449407927" TYPE="ext2"