Error de controlador C260. Intel (R) pe ntium (r) pr ocessor n- y j-series / i NTEL -0f34 usb ehci

primero tuve este error lo solucione con entrar ala bios y asi desaparece pero ahora cada vez k conecto un dispositivo se conecta y se desconecta y no me lo recono he intentado conectar varios celulares pero hace lo mismo cabe mensionar que solo son los puertos de al lado los de atras no tienen problema instalan en automatico cualquier cosa ya intente el modo recovery y nada que puedo hacer.

Buen día,
Bienvenido al Foro.
Para este caso te recomiendo restaures el BIOS Por default con la tecla F9 y el error desaparece. Para ingresar al BIOS es con la tecla F1
Espero sea de mucha ayuda esta recomendación y a la espera de comentarios
Gracias y Saludos,
Johan Oñoro
Support Specialist
Comunidad en Español English Community Deutsche Community
Es importante recalcar también que los foros suplementan los recursos de los usuarios de Lenovo pero no reemplazan el servicio técnico oficial. Para un listado de números de servicio sigue el enlace: Numeros de Soporte

Similar Messages

I get error message: not enough space to download when I try to buy a tv series on Itunes. It tells me to delete photos or videos to make space, but I have no photos and videos. Help?

I get error message: not enough space to download when I try to buy a tv series on Itunes. It tells me to delete photos or videos to make space, but I have no photos and videos. Help?

I would guess that a TV series takes up a fair amount of storage capacity. It is just a standard message I think that may indicate that you are actually running low on storage space.
If you go to Settings>General>About how many GBs are specified as being available? If you are low on space maybe deleting some apps may help.

HT1476 when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device. But when i use a gigaware (radioshack brand) usb charger, no error msg. Why?

when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device. But when i use a gigaware (radioshack brand) usb charger, no error msg. Why?

- Try restoring the iPod, first from backup and then try to factory settings/new iPod to rule out a software problem.
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and broken or cracked plastic.
- Could you have damaged something when you took the iPod apart and replaced the Home button?

TS2634 My problem - when syncing and error messages comes up: iTunes could not sync calendars to the iPhone because an error occurred while margin data." I've tried turning the phone off and back on, & tried both USB ports but get the same thing. What

My problem - when syncing and error messages comes up: iTunes could not sync calendars to the iPhone because an error occurred while margin data." I've tried turning the phone off and back on, & tried both USB ports but get the same thing. What can I do next since it doesn't give me even one clue as to what the error would be?

Before I started to resync calendars one by one as suggested in the troubleshooting article, I remembered something that came up in a sync when I first attempted : a 'which one do you want to keep' message about a repeating calendar event, which came up with three options, one from Calendar, and two from iCal on the phone. I deleted that event, then went through the calendar resync one by one, and all seems OK now.
In Music there is a way to find 'ghost' items that show up as grayed-out on the menus, so that you can try to reassociate or delete them. It would be nice to have a similar way to work with Calendar!
Thanks for pointing me to the right article.

My iphone won't work after fatal error occurred installing iOS5.1 have followed allsteps to reconfigure software onto windows still no phone just a usb and itunes picture on screen

my iphone won't work after fatal error occurred installing iOS5.1 have followed allsteps to reconfigure software onto windows still no phone just a usb and itunes picture on screen

Connect the phone directly to the computer, not a hub.
Disconnect all other USB devices except keyboard and mouse.
Disable your firewall
Disable your antivirus
In iTunes if it recognizes the phone click "Restore"
If it doesn't recognize the phone:
Disconnect the phone from the phone end, leave the USB cable plugged into the computer
Hold the HOME and SLEEP buttons until the screen turns black, excactly 10 seconds, then release the SLEEP but continue holding the HOME (If an Apple logo appears you have held SLEEP too long; do it over)
While holding HOME connect the cable to the phone
As soon as iTunes recognizes the phone release the HOME button and it should restore.
If neither procedure works note the exact error message and post it.

I have an iMac G4 PowerPC with OS 10.5.? The OS10.5.8 update failed. Now get blue screen and error-can't find Intel Power Manager. What now??

I have an iMac G4 PowerPC with OS 10.5.? After deleting 17G of music files to make room on the 74G drive, The iPhoto and iWeb updates seemed to load okay, but the OS 10.5.8 update failed - message opened said the computer encountered an error and must shut down. Now I get the blue screen. Startup with 'V' pressed shows multiple lines saying: error-can't find IntelCPU Power Manager. What now?? I reset PRAM, I think.....?????

I am concerned that you might have applied a system updated intended for an Intel iMac, while you have a PPC (non-Intel) iMac. Your PPC OS should not be looking for an "IntelCPU Power Manager."
Have you tried booting from the 10.5 install DVD/CD and repairing the hard drive, plus repairing permissions?
If you done the repairs mentioned above, and your problem still persists, you can also try doing a safe boot. (see http://support.apple.com/kb/HT1455 ) Then, if none of these things worked, if I were in your shoes (it's hard to diagnose these things without being there in person) I would first check that there is adequate disk space, then I would boot from the 10.5 DVD/CD install disk and reinstall the operating system. There is an option to do an archive and install preserving user files/settings, that would be the option you want, as it will save your files but install a new OS. Make sure you have a good backup of your files first. If you do not have one, use "target mode" to copy all your files before embarking on an new OS install. Assuming that you do succeed with this install, then use Software Update to get the right updates for your iMac.

Powerpc error when installing on intel mac, powerpc error when installing on intel mac

Trying to reinstall some software that used to work & no I receive the following error: “Spyder3Pro_Installer” because PowerPC applications are no longer supported. This happened on another application I was attempting to install as well.

Thank you for the reply, but I was able to fix it. I'm sorry, I guess I didn't explain it well. The apps were not for a powerpc & the mac is an intel. For some reason the apps thought it was a ppc, so I'm not sure what happened. I had Mountain Lion installed & the apps were working fine until the crash. Just trying to put everything back & I get this error. There is another app that I get the same error on, but not sure if the fix will be that easy.

Error when starting installation (Intel)

Hi,
I am a hardcore rookie this the first time I have ever attempted to install Solaris any help would be GREATLY appreciated. I get through most of the boot process, I setp my default boot device but then when I hit F2 to contiune I get this error:
Unable to mount a Solaris root system from the Device:
Disk (*) Target 0, WDC A32 100H
on IDE controller on ISA Bus at 1F0
Error message from mount
/isa/ata@1,1f0/cmdk@0,0:a:
cant open -no VTOC
press enter to continue
HELP!!!!!!!!
Thanks!!!
Fred

Fred, what kind of hardware are you using and which version of Solaris are you installing?
My experience with the Solaris 8 intel installs seemed to show that often using the install with software Disk 1 or 2 works better that install CD. Your error message sounds like it's having problems with your hard drive ... of some kind. How big is your hard drive? Solaris 8 on Intel often has problems with real big drives that you need to get pretty tricky to get around.
Fill in some more details and someone will give you some hints! Hey, pain is fun, it shows your brain is still alive!
Cheers, John

Error in updating my intel-iMac

I am have problems updating any of my OX on my intel-IMac with version 10.7.2. Tried the software and manual update but keep getting errors and stops the download. It will not let me up date some of my application ether. What can I do to fix this?

The application is the new version of OS X Mountain Lion. But it gives me errors with every application update I try. Adobe reader, Microsoft Office updates, or trying to install Silverlight. I am running a iMac with
Software Mac OS X Lion 10.7.2 (11C74),
Graphics AMD Radeon HD 6770M 512 MB,
Memory 4 GB 1333 MHz DDR3
Processor 2.7 GHz Intel Core i5
I tryed the automatic software update and manual also but I still get errors. The automatic software update says I have 6 new updates but when I download them and try to install, then I get an error message that the could not be installed. I have administrator permission and tried to fix the verifications on the HD also.

Error code 10 for Intel 5300 Wireless Card

Hi,
I tried to install a new Intel 5300 Wireless Card in my Thinkpad T400.
However, it is not very successful.
After I installed the driver, I find a yellow exclamation point on the 5300 Wireless Card on the device manager and an error code 10 (can't start device).
I have tried to re-install the driver but still no luck.
Could anyone help for this?
Thanks a lot
Here is some information might be useful:
Operating System: Windows XP (SP3)
Driver download from Lenovo: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70504
Wireless Card bought from ebay (The seller said this card can support IBM/LENOVO T400).

Unless the card is a Lenovo Branded card, it won't work. But since you aren't complaining about an error in BIOS about an unauthorized card, then you also might have put it in the wrong slot.
Check the Hardware Maintenance Manual for your particular system and make sure you have it in the WLAN slot, not the WWAN slot.

Wine error appears related to Intel video?

Am attempting to run "Learn to Play Bridge" software (http://www.acbl.org/learn/ltpb.html) using Wine v1.1.36. According to the wineappdb website this software works perfectly under Wine. Not for me it doesn't!
Here is the error I get:
err:xrender:get_xrender_format_from_color_shifts No XRender format found
My video chipset is the Intel 82945G and I am using the Intel driver. my xorg file is below:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri2"
Load "extmod"
Load "glx"
Load "dbe"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "82945G/GZ Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
I get the basic application window but the menu buttons are all greyed out and there is no central graphical part to the window itself.
Any assistance on to how I might proceed would be greatly appreciated.

Is another copy of FCP with your serial number running at the same time? (while both are connected to the net)
This link lists Apple error codes...
http://support.apple.com/kb/HT2237?viewlocale=en_US
A google search of 'mac os error code 600' lists a variety of possible causes. You might try checking there...
http://www.google.com/search?hl=en&client=safari&rls=en&q=macos+error+code600&btnG=Search
K

Why am I getting midi conflict/sample rate errors. GarageBand 10 intel mac

Why am I getting midi conflict sample rate errors with no connected midi device?

Ok, I'll answer this myself. It has nothing much to do with midi devices being in conflict with anything. Nothing much to do with midi devices, as such, in fact. What it seems to be is a slow running system, whether it be processor, or hard disk, or whatever. In fact, when I found the cause of the problem, it was easy to solve.
What I saw a few times throughout this episode, was an inacurate sample rate report, which caused Garageband to run and react slowly, causing stuttering and flutter in audio output, so that noises were produced as the program struggled to handle the data streams it was reading and trying to reproduce and output cohesively. All of that was caused, it seems, by my iMac overworking and getting a bit too hot for comfort, having run all day, and multitasking for a good deal of it. I didn't adjust I/O buffering, or take any of the usual 'advised action' I've read from other users.
I simply saved my work and shut down the machine for an hour or two. When I restarted the machine, all had returned to normal. The lesson is, it seems to me, is minimise, or, stop other tasks the machine is carrying out. Safari, in particular, seems to be a major drain on resources, so work without it running. Shut down all unecessary programs and tasks, and run Garageband alone, when working in it. Garageband is a much tamer beast when it's left alone to do what you ask of it. It's quite a sensitive little soul. :-)

C260 Intel Pentium J1800 processor

Im on C260 #2 took my first one back to best buy due to a CODE 10 processor being " disabled " and not able to start up . This one here is ALSO the same problem . Is there a way to ENABLE it ?

I'm also on my second machine .Are we all thick or is there a major design fault with these machines?

OC Genie error message "please install intel ME8 driver to enable cpu overclock"

MB: Z77A-G43 GAMING
OS: Win8
I have updated bios to ver 25.0 as described on MSI site but I am still getting this error message that stops me from OC Genie overclock of my i5 3750K proc.
Any advice?
Thanks:)
Ole

http://www.msi.com/product/mb/Z77A-G43-GAMING.html
Download all of the drivers from the link above and install them.

Install error for Solaris 8 intel

When my Solaris 8 install gets to the spot where it asks for the language to use (0-9, english is 0, which I want), anything I hit on my keyboard sends bogus VT codes to the screen. Earlier in the install process (when it asks for solaris interactive vs custom for example), my keyboard works fine, I can choose 1 or 2 there.
Has anyone else seen the problem? I've tried multiple keyboards, and they all do the same thing.

Sounds like the dell keyboard problem:
http://groups.yahoo.com/group/solarisonintel/message/20087
The workaround is to attach an USB keyboard.

Error de controlador C260. Intel (R) pe ntium (r) pr ocessor n- y j-series / i NTEL -0f34 usb ehci

Similar Messages

Maybe you are looking for