Error .dmp
i am developing a new page, The page consists of link buttons and click of these link buttons its taking us to new form, on double click of the values in matrix in new form its giving the error .dmp file is created and please contact support for further assistance. Please help me it's urgent. it's not assigning the values to the text box.
Thanks & Regards,
Jayanth
I am not sure I understand but I suggest you to profile your addon execution.
If you addon is a .NET addon you can use B1 .NET Profiler part of B1TE
available for free here on SDN.
Similar Messages
-
Like watching a file error dmp
Crystal Report gives me an error and it closes, all that does is create a log file crw32.dmp what I do in order to view the file?
Ok, but is not very descriptive I don t know what is better
Faulting application crw32.exe, version 12.0.0.683, stamp 47c8be9a, faulting module mfc71u.dll, version 7.10.3077.0, stamp 45952313, debug? 0, fault address 0x000ac991. -
Error in importing XML Repository
Hi,
I'm trying to deploy my application from SIT machine to UAT machine.
I have exported a jar for
XML repository, EventKeys and Business operations from SIT machine.
Now I'm trying to Import them to UAT machine.
I've deleted all the default organizations and created required One oon UAT.
I was able to import EventKeys.jar and BusinessOperations.jar.
But While importing XML Repository jar I'm getting
com.bea.eci.repository.helper.RepositoryException.
Can somebody help me on this.
Thanx and warm regards,
Brijesh M
[Error.dmp.txt]Hi Pruthvi,
It's a namespace problem. The namespace of XML generated by PI is not matching with namespace of xsd schema used in your import map.
Try correcting the name space in PI. -
I upgraded from 5.1 to 5.2, and the VP and DMP upgrades went fine (other than the one 4305 I managed to "brick" in the process). But
on the DMM upgrade, not so much. All seemed to work well, except when trying to access the DMM admin post-install I get the following error message: ("An error has occurred. Click on the button below to try again. If this does not work, please contact your system administrator.)
I suspected a DNS misconfiguration issue on the initial upgrade, but after verifying forward and reverse DNS FQDN's everywhere, I did a clean 5.1 build and upgrade to 5.2, and still the same issue.
Everything else seems to work fine. AAI is accessible and it sync's with SaS, and there are not other visible errors reporting anywhere else along the way, but I can't seem to get past this (Tomcat?) error.
Ideas?
Thanks...
MikeThis is a known issue that is being addressed.
Description
Certificate disappears after upgrade from 5.1 to 5.2
Solution
Regenerate Certificate by changing Hostname (can be the same hostname, just select “OK” w/o changing the name).
SnS First, then DMM
Reboot Server
This is from the AAI interface...
Let me know if this works..
T. -
Error while importing a .dmp file
Hi Friends,
I have created a DB in Oracle 10g and when i started to import the dump file
C:\>imp sys/pwd@sample file=E:\sample\sample.dmp ignore=y
I get the following error
IMP-00058: ORACLE error 12514 encountered
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
IMP-00000: Import terminated unsuccessfully
someone please correct meC:\>tnsping sample
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 02-OCT-2
007 10:08:46
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
E:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = ipaddress)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = sample)))
OK (10 msec)
C:\>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 02-OCT-2007 10:09:40
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
Start Date 02-OCT-2007 05:56:11
Uptime 0 days 4 hr. 13 min. 28 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File D:\oracle\ora92\network\admin\listener.ora
Listener Log File D:\oracle\ora92\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=machine name)(PORT=8080))(Presentation=HTTP)(Session=RAW))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=machine name)(PORT=2100))(Presentation=FTP)(Session=RAW))
Services Summary...
Service "test3" has 2 instance(s).
Instance "test3", status UNKNOWN, has 1 handler(s) for this service...
Instance "test3", status READY, has 1 handler(s) for this service... -
while loading a.dmp file into oracle in centos using impdp command following errors seen Can any body help me.....?
Export: Release 10.2.0.1.0 - Production on Wednesday, 01 November, 2006 1:51:55
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 475
ORA-29283: invalid file operationHi;
while loading a.dmp file into oracle in centos using impdp command following errors seen Can any body help me.....?Centos is not certified platform
Export: Release 10.2.0.1.0 - Production on Wednesday, 01 November, 2006 1:51:55
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 475
ORA-29283: invalid file operationSee:
Export/Import DataPump Parameter DIRECTORY - How to Specify a Directory [ID 266875.1]
ORA-39002,ORA-39070,ORA-29283 When Modifying The Group That Has Access To DataPump directory [ID 552783.1]
Regard
Helios -
Error while trying to import .dmp file in oracle
Hi,
I am trying to import a .dmp file using impdp command. Whenever I try that I get following error logs:
Import: Release 10.2.0.1.0 - Production on Wednesday, 27 July, 2011 19:22:18
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=HIST_IR_APR_2011.dmp
Processing object type TABLE_EXPORT/TABLE/TABLE
ORA-39083: Object type TABLE failed to create with error:
ORA-00439: feature not enabled: Partitioning
Failing sql is:
CREATE TABLE "DBO"."HIST_IR" ("IR_ID" NUMBER(9,0), "ELS_ID1" NUMBER(9,0), "ELS_ID2" NUMBER(9,0), "ZONE_ID" NUMBER(2,0) NOT NULL ENABLE, "TYPE" NUMBER(2,0) NOT NULL ENABLE, "START_TIME" DATE NOT NULL ENABLE, "END_TIME" DATE NOT NULL ENABLE, "ROAD_NAME" VARCHAR2(50) NOT NULL ENABLE, "UP_POINT" NUMBER(4,2), "DN_POINT" NUMBER(4,2), "UP_LINK_ID" NUMBER(9,0) NOT NULL ENABLE, "DN_LINK_ID" NUMBER
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
Processing object type TABLE_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
ORA-39112: Dependent object type OBJECT_GRANT:"DBO" skipped, base object type TABLE:"DBO"."HIST_IR" creation failed
ORA-39112: Dependent object type OBJECT_GRANT:"DBO" skipped, base object type TABLE:"DBO"."HIST_IR" creation failed
ORA-39112: Dependent object type OBJECT_GRANT:"DBO" skipped, base object type TABLE:"DBO"."HIST_IR" creation failed
Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
ORA-39112: Dependent object type INDEX:"DBO"."INDX_HIST_IR_LOC_TYPE" skipped, base object type TABLE:"DBO"."HIST_IR" creation failed
ORA-39112: Dependent object type INDEX:"DBO"."INDX_HIST_IR_ROAD_NAME" skipped, base object type TABLE:"DBO"."HIST_IR" creation failed
ORA-39112: Dependent object type INDEX:"DBO"."INDX_HIST_IR_ELS_ID1" skipped, base object type TABLE:"DBO"."HIST_IR" creation failed
ORA-39112: Dependent object type INDEX:"DBO"."PK_HIST_IR" skipped, base object type TABLE:"DBO"."HIST_IR" creation failed
ORA-39112: Dependent object type INDEX:"DBO"."INDX_HIST_IR_START_TIME" skipped, base object type TABLE:"DBO"."HIST_IR" creation failed
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
ORA-39112: Dependent object type CONSTRAINT:"DBO"."PK_HIST_IR" skipped, base object type TABLE:"DBO"."HIST_IR" creation failed
Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 10 error(s) at 19:22:21
Any idea how to get rid of the errors ?
BR///
TayyabI also tried to open the .dmp file using Oracle 11g Enterprise Edition but kept getting following errors:
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** dumpfile=HIST_IR_APR_2011.dmp
Processing object type TABLE_EXPORT/TABLE/TABLE
ORA-39083: Object type TABLE failed to create with error:
ORA-01918: user 'DBO' does not exist -
Error occured when importing data from dmp
Hello friends
when i am importing data from dmp file
the following error occured
Please help me to solve this
Error message :
Export file created by EXPORT:V09.02.00 via conventional path
import done in WE8PC850 character set and AL16UTF16 NCHAR character set
export client uses US7ASCII character set (possible charset conversion)
Import terminated successfully without warnings.This is not really an error message but a information about possible character conversion from US7ASCII to WE8PC850 which should NOT be an issue since all US7ASCII characters are in most WExxx character sets.
Message was edited by:
Pierre Forstmann -
Error Adding DMP 4400 to DMM 5.2.2
I am trying to add a new DMP to my DMM system and everytime I input the IP and MAC on the DMM for the DMP and click ok to add I get the following error code.
DMP could not be added. Error 400
Any Ideas as to what this error code is. I have serched and am unable to find any information on error codes for DMM.
DMP:
DMP-4400
5.2.2
DMM:
Version ID: V5.2.2
HW Model: MCS-7835-H3Hello,
1) Do you have a firewall in your network, If Yes - Have you opened the necessary ports on it ?
Please refer to the ports that need to be allowed between the DMP and DMM.
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_2/showandshare/admin/guide/appports.html
2) Error Code 400 could be the HTTP Error code, Which means that the request from the client to the server or vice versa was not understood by the receiving end.
3) Makes sure the DMP and DMM are running the same code version and nothing is blocking port 7777 between them.
4) A screenshot of the error would be helpful .
Thanks,
Sagar Dhanrale -
Hi,
I try to do imp dmp file in oracle 10g xe.
the export done was done on oracle 9i but when i do import in oracle 10g it comes with this error msg:
Export file created by EXPORT:V09.02.00 via direct path
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
export client uses US7ASCII character set (possible charset conversion)
IMP-00031: Must specify FULL=Y or provide FROMUSER/TOUSER or TABLES arguments
IMP-00000: Import terminated unsuccessfully
Is it dmp file was done using ascii rather than binary mode?
Do I have to migrate the character set from US7ASCII to WE8MSWIN1252? or any other idea?
Thanks.Hi,
IMP-00031: Must specify FULL=Y or provide FROMUSER/TOUSER or TABLES arguments
IMP-00000: Import terminated unsuccessfullyIn your import command: imp you need to use full=y if you want to importa all in the new DB or fromuser=x touser=x to import schema by schame or use tables=...
Cheers,
Francisco Munoz Alvarez
http://www.oraclenz.com -
Hi
My Oracle version is , oracle 9i , i wanted to import a dump file which has taken by same version of oracle.when i executed the imp command for that dump file , i'm getting following error message.
Export file created by EXPORT:V09.02.00 via conventional path
import done in UTF8 character set and UTF8 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
export client uses US7ASCII character set (possible charset conversion)
export server uses AL16UTF16 NCHAR character set (possible ncharset conversion)
IMP-00017: following statement failed with ORACLE error 4068:
"BEGIN "
"sys.dbms_logrep_imp.instantiate_schema(schema_name=>'Hotels', export_db_na"
"me=>'Hotels.US.ORACLE.COM', inst_scn=>'1363425837');"
"COMMIT; END;"
IMP-00003: ORACLE error 4068 encountered
ORA-04068: existing state of packages has been discarded
ORA-04063: package body "SYS.DBMS_LOGREP_UTIL" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at "SYS.DBMS_LOGREP_IMP", line 271
How can i solve this ? can some body help me plz ?
Thank you
Luke
Edited by: user2975888 on Jul 10, 2009 7:36 AMHi
Sorry for delayed reply with results.
SQL> select count(*) from dba_objects where status like '%INVALID%';
COUNT(*)
29
OWNER OBJECT_NAME OBJECT_TYPE
SYS DBA_LOGSTDBY_LOG VIEW
SYS DBA_LOGSTDBY_PROGRESS VIEW
SYS DBMS_ASYNCRPC_PUSH PACKAGE BODY
SYS DBMS_CAPTURE_ADM_INTERNAL PACKAGE BODY
SYS DBMS_CAPTURE_PROCESS PACKAGE BODY
SYS DBMS_DEFER_QUERY PACKAGE BODY
SYS DBMS_DEFER_SYS PACKAGE BODY
SYS DBMS_DEFER_SYS_PART1 PACKAGE BODY
SYS DBMS_INTERNAL_LOGSTDBY PACKAGE BODY
SYS DBMS_LOGMNR_D PACKAGE BODY
SYS DBMS_LOGMNR_FFVTOLOGMNRT PROCEDURE
SYS DBMS_LOGMNR_INTERNAL PACKAGE BODY
SYS DBMS_LOGMNR_LOGREP_DICT PACKAGE BODY
SYS DBMS_LOGMNR_OCTOLOGMNRT PROCEDURE
SYS DBMS_LOGMNR_SESSION PACKAGE BODY
SYS DBMS_LOGREP_UTIL PACKAGE BODY
SYS DBMS_LOGSTDBY PACKAGE BODY
SYS DBMS_REPCAT_MAS PACKAGE BODY
SYS DBMS_REPCAT_SNA_UTL PACKAGE BODY
SYS DBMS_REPCAT_UTL PACKAGE BODY
SYS DBMS_SNAPSHOT PACKAGE BODY
SYS DBMS_STREAMS_ADM_UTL PACKAGE BODY
SYS LOGMNR_DICT_CACHE PACKAGE BODY
SYS LOGMNR_GTLO3 PROCEDURE
SYS LOGMNR_KRVRDA_TEST_APPLY PROCEDURE
SYS LOGMNR_KRVRDLUID3 PROCEDURE
SYS LOGMNR_KRVRDREPDICT3 PROCEDURE
GATEWAY AB_TRIGGER TRIGGER
GATEWAY APPLETINFO_TRIGGER TRIGGER
29 rows selected
This is the error i'm getting when i'm importing the dmp file .
Import: Release 9.2.0.7.0 - Production on Sat Jul 11 18:48:37 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
With the Partitioning option
JServer Release 9.2.0.7.0 - Production
Export file created by EXPORT:V09.02.00 via conventional path
import done in UTF8 character set and UTF8 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
export client uses US7ASCII character set (possible charset conversion)
export server uses AL16UTF16 NCHAR character set (possible ncharset conversion)
IMP-00017: following statement failed with ORACLE error 4068:
"BEGIN "
"sys.dbms_logrep_imp.instantiate_schema(schema_name=>'GATEWAY', export_db_na"
"me=>'GATEWAY.US.ORACLE.COM', inst_scn=>'1363425837');"
"COMMIT; END;"
IMP-00003: ORACLE error 4068 encountered
ORA-04068: existing state of packages has been discarded
ORA-04063: package body "SYS.DBMS_LOGREP_UTIL" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at "SYS.DBMS_LOGREP_IMP", line 271
ORA-06512: at line 2
Thanks
Luke -
Oracle error 0603 where importing dmp file
hi,
i have an error message when importing a dmp file.
$ORACLE_HOME/bin/imp system/xxxx file=$PIPE_NAME log=$FIC_LOG commit=y buffer=4194304 fromuser=user touser=user
. . Import de la table "RACLEGL" 471445 lignes importées <
IMP-00017: Echec de l'instruction suivante avec erreur ORACLE 603 :
"CREATE UNIQUE INDEX "RAPRIK_CGL" ON "RACLEGL" ("CGL_RENTITY" , "CGL_CODE" ,"
" "CGL_ORG" , "CGL_LINE" ) PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITI"
"AL 65536 FREELISTS 1 FREELIST GROUPS 1) TABLESPACE "IDX_1" LOGGING"
IMP-00003: Erreur ORACLE 603 rencontrée
ORA-00603: La session de serveur ORACLE s'est terminée par une erreur fatale
IMP-00017: Echec de l'instruction suivante avec erreur ORACLE 3114 :
"BEGIN DBMS_STATS.SET_INDEX_STATS(NULL,'"RAPRIK_CGL"',NULL,NULL,NULL,470059"
",2380,470059,1,1,204641,2,0); END;"
IMP-00003: Erreur ORACLE 3114 rencontrée
ORA-03114: pas connecté à ORACLE
IMP-00003: Erreur ORACLE 3114 rencontrée
Thanks for your helpI tried reinstalling imp.exe and exp.exe using the Oracle Universal Installer. I checked the import/export utility, but the OUI removed THE ENTIRE developer suite ;-(
So, I decided reinstalling the Oracle and the developer suite from scratch! The installation was ok and I could see the imp.exe working fine during the repository building.
I also did a lot of experiments and some results follows:
I can export and import an application system if I use the SAME user to export and import the .dmp file;
I can import a .dat file exported by another user sometimes
But, my main trouble still exists: I cant import .dmp or .dat files from another user that used exp.exe 8.xxx.
The symptom when I try this last option is the freezing of imp.exe like the follow example:
Import: Release 10.1.0.4.2 - Production on Sßb Fev 18 21:15:51 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Conectado a: Personal Oracle Database 10g Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Arquivo de exportaþÒo criado por EXPORT:V10.01.00 via caminho convencional
AdvertÛncia: os objetos foram exportados por ALUNO; nÒo por vocÛ
importaþÒo realizada nos conjuntos de caracteres WE8MSWIN1252 e NCHAR AL16UTF16
. importando objetos de ALUNO para ALEXFM
. . importando table "XTSYS_EXPORT_OBJECTS" 1 linhas importadas
. . importando table "XTSYS_IMPORT_IRID_MAPPING" 68 linhas importadas
. . importando table "XTSYS_IMPORT_IVID_MAPPING" 68 linhas importadas
. . importando table "XTSYS_RM$REPOSITORIES" 1 linhas importadas
. . importando table "XTSYS_TABS_EXPORTED" 14 linhas importadas
The imp.exe always freezes at xtsys_tabs_exported
Any ideas?
Regards, Alexandre -
DMP Error when in Business Partner Master Data
Forum,
I have one client which produces DMP errors each time they go into the Business Partner Master Data screen. This is since they have been upgraded to 8.8 PL20. Prior to this, there was no such issue.
The spec of the machine is as follows:
Xp Sp3
Pentium 4
1.99GB RAM
Has anyone on here come across this problem since upgrading to 8.8 PL20?
Regards,
JuanHi ,
Check system message log.
Check if two instances of the BP Master are running.
check if any mandatory UDF or FMS or SP_TN creating a problem.
Try cleaning Tmp and log files.
Even if any of your add on EXe is not getting terminated properly then this may also cause such issues.
Thanks
Malhaar -
Hi,
While logging in with user Code and Password the dmp file is getting created.unable to log in.
I have created new users for the same and made them to work but now the error persists for other users.
There are 24 users.Now i created 3 users extra because of this error.
But it is coming for other users how to deal with this.
Please help
Thank You
Md.nazeer ShaikhHi,
Many reasons are there for creation of DMP File.
1. Due to Corrupted database
2. Client and SAP Server Not communicated properly.
3. IP Conflicts between the server and Clients, more than one server has been installed in that work station.
4. Client machine not been properly communicated such as printersu2026.
My Suggestion:
Please check whether more then one server had been installed in your work station. If yes, connect the server and client using the unique server name and its port number (Dataserver: 30000). Try to separate your sap server from the other server port.
Senthil Maruthappan
Team Work Never Fails. -
IMPORT ERROR for .dmp file
Hi,
I am getting this error, when I try to import a .dmp file:
ERROR:
Message 100 not found; No message file for product=RDBMS, facility=IMP: Release 9.2.0.1.0 - Production on Wed May 23 15:35:53 2012
Copyright (c) 1982, 2002, Oracl
Invalid format of Import utility name
Verify that ORACLE_HOME is properly set
Import terminated unsuccessfully
IMP-00000: Message 0 not found; No message file for product=RDBMS, facility=IMP
There is imp.exe file in my bin folder. Also the environment variable is set.
I have no clue how to overcome this problem.not sure what is happening, but my guess is that your imp msg file is not loaded correctly. The imp 0000 message is:
00000, 00000, "Import terminated unsuccessfully\n"
// *Cause: Import encountered an Oracle error.
// *Action: Look up the accompanying Oracle message in the ORA message
// chapters of this manual, and take appropriate action.
Dean
Maybe you are looking for
-
Headphone Jack sticking and screen turning on
I bought a sim free palm pre (non plus!) a month or so ago from handtec UK and now the sound intermittently doesnt work. its like the headphone jack is sticking which ive seen is common but when there is no sound the screen randomly turns on like i p
-
"slashed out" multiclip, can't see video in monitor
I was editing a multiclip in the multi camera monitor, and its all went fine. But back in the sequence, however, I see that the multiclip is slashed out. There are grey slashes running through the duration of the clip, and I see NO video upon playbac
-
HT1766 In iOS 8 hotspot option available are not
IIn iOS 8. Hotspot option available are not
-
I have developed a project on flash builder 4.6 as a new action script project and I chose web & Flex SDK 4.6 (default), and now with Flash Builder 4.7, the project won't run, and the package available is AIR SDK only.. no flex!!
-
I know my e-mail and password but forgot my security questions, What can i do?
i know my e-mail and password but forgot my security questions, and im not able to access my app store account, what can i do