Error during Activating DC
Hello Experts,
I am getting an error while activating a DC on the track. There are no build errors nor any runtime errors, but after checkin, when I try to activate the DC, it gives me a generation error :
ERROR: Unknown exception during generation null (com.sap.webdynpro.generation.ant.GenerationAntTaskError)
The detailed error is :
[wdgen] [Error] .Ctx_vn_SkillsApplicable: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] .Ctx_vn_SkillsApplicable.Ctx_va_SkillID: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] com.ltitl.tdc.wd.view.tdc_wimsedit.Tdc_wimsedit --> ContextValueAttribute Ctx_va_SkillID [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
[wdgen] [Error] .Ctx_va_Associated: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] com.ltitl.tdc.wd.view.tdc_wimsedit.Tdc_wimsedit --> ContextValueAttribute Ctx_va_Associated [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
[wdgen] [Error] com.ltitl.tdc.wd.view.tdc_wimsedit.Tdc_wimsedit --> TextEdit TextEdit_AssoWIMS [value]: Context element and property are not compatible
Please assist on this.
Thanks and Regards,
Divyata
Edited by: Divyata Dal on Jan 8, 2009 7:52 AM
I had trouble like this where the DC worked great locally but did not deploy upon check in. I was guided to an easy to miss button in the CMS. Some how there was "old stuff" it was trying to use so I had to reintitalize the compartment
Per SAP
You could try to initialise compartment of the SC in CBS to recreate
CBS cache of DTR sources.
Afterwards try to activate again.
This intialize button is found at CBS Web UI > CBS Buildspace Details > Build Compartment tab > the initialize button is at the bottom of page.
Regards,
Diane
Edited by: Diane Fuller on Jan 8, 2009 6:57 AM
Similar Messages
-
Error During Activation of Web services
When I try to create a web services using RFC and try to complete the steps in the wizard. I am getting error message as "Error during Activation of web services". and also when configure service in wizard, im getting only two profiles as "Basic Authorization: SOAP PROFILE" and "Secure SOAP PROFILE". Kindly do the needful.
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on Aug 8, 2011 1:33 PMOlivier, thank you so much
SOAMANAGER does not exist in my system (sp level 8), so node "/sap/bc/soap/rfc" should be active. Actually, it is active.
I think the problem is related to user rights/profiles.
I have tried to create another WS after assigning role SAP_BC_WEBSERVICE_ADMIN. The same error when trying to activate it, but now, I can see this WS in SE80 (under "Enterprise Services->Service Definition"). It is not active there and if I try to activate it, a success message appears indicating that user "is not authorized to use function netzwerkadministration". I cannot see any new services in SICF...
Probably the new entry in SICF will be created after activating WS in SE80...
Do u know what user profile should I add in order to properly activate the WS in SE80?
Thank you very much!
Vicente -
Error during activation of ExternalWebServiceIntegration
Hi All,
Has anyone got the following error during activation of ExternalWebServiceIntegration?
I am trying to create an ExternalWebServiceIntegration for a SOAP based ERP web service. I am able to create the ExternalWebServiceIntegration using the required WSDL file. But when I try to activate it, I get this error message.
Any idea on what could be causing this?
Thanks,
SanatDid you perform a "Check" and see if something's thrown at Output window?
If you don't have enough info to debug, then I suggest you raise an incident. -
Error during activation of ODS data
Hi all,
I am getting error during activation of ODS data.
Error: Error occur during activation.
How to check , where that error exactly occurs.
Appreciating any response.Hi Santosh,
SM37 is mainly for monitoring the back ground jobs...... both in R/3 side and BW side this is same.. just for monitoring the background jobs... fisrt by using SM36 basis people will schedule in background.. and we just identify.. which are completed and which are not completed... in SM37.
there are various status they are
PLANNED
RELEASED
CANCELLED
ACTIVE
FINISHED
READY
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a8016505211d189550000e829fbbd/frameset.htm
In Sm37 u can see the different options for background jobs, like Scheduled, released, ready,active, finished, canceled.. If u want to know the Status of the current running job, U just type the job name, user name then click execute(F8).
hope this helps
regards
Karthik
Assign points if helpful -
Error during activation a message mapping
Hi,
I get this error during activation a message mapping:
source code has an syntax error:
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapf1f9db20a78a11dac004000f1ff80130/source/com/sap/xi/tf/_Source2Target_.java:2: package com.sap.aii.mappingtool.tfapi does not exist import com.sap.aii.mapping.api.; import com.sap.aii.mappingtool.tfapi.; ^ 1 error
Can anybody help me please??
Thanks.
Regards
StefanHi Michal,
I do not have deleted some libraries in the XI-Installation.
I have some customer functions in other mappings but no message mapping without or with customer function can I activate, now.
The mappings are in serveral software components but it is no chance to activate a message mapping.
Regards,
Stefan -
Error during activation in adobe form
Hi Guys,
While activating the adobe form i am getting the error message as 'Error during activation' with out any futher details.Its not showing any error details.Appreciate you for your help.
Regards
SyedHi,
I am facing the same problem of "Error during activation" while activating the SAP interactive form.
I am using ECC 6.0, ADL 7.1 and Adobe reader 8.0
Could you please suggest a way out.
Thank You
Aser -
Error During Activation while activating Report Selection Texts
Hi,
I've developed a report and the Transport Request for the Report has been migrated to Quality and Production Systems. Now, I have to make some more changes where I had to create another request.
Now, while activating the Selection Texts for the Report under the New Transport Request, it gives me an error message saying "Error During Activation". Could somebody tell me the reason and resolution for this error?
Thanks and Regards,
VenkatHi ,
Try activating it through se80 , as it activates the complete object .
In inactive head , with your user id see all the inactive object , may be there you can find the program , or the texts . Activate and see.
Regards,
Sureshp. -
Error during activation of text elements
Hello All,
I have a problem activating the text elements of a program. The
text elements can be edited but can not be activated. It displays an error during activation prompt.I tried deleteing it and recreating but still does not work.
Thanks in advance for all the help.
Rgds,
AnjuHave a look at:
Selection Text Activation
Amit. -
Error during activation in Text Elements
Hi All,
I am getting ' Error during activation ' in Text Symbol While Creating new transport request.
and in Changing mode it's shows inactive mode For Previous Transport request user.
Please Suggest any Solution For that .
Thanks & Regards,
ManishHi Mahesh,
The Previous User Request already released .There is on Button there (active/inactive).
When i click this button it goes to display mode and shows status as active.
but when i click change mode it shows status as in active.
Thanks & regards,
Manish -
Error during activation of adobe non-interactive form
Hello everyone,
I am trying to activate a non-interactive adobe form and am getting the below error:-
"Field p_lifnr has a conversion routine(see SAP note 796755)".
I have made sure that this field (which is corresponding to LFA1-lifnr) has context binding, I even tried using below code in its interface:-
GET PARAMETER ID 'LIF' FIELD p_lifnr.
and also tried the below:-
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = p_lifnr
IMPORTING
output = p_lifnr.
just in case..
but all above in vain,can someone let me know what might be the problem....or where would I find this 'SAP note 796755' ?
Thanks,
Rachna.Hi,
I am facing the same problem of "Error during activation" while activating the SAP interactive form.
I am using ECC 6.0, ADL 7.1 and Adobe reader 8.0
Could you please suggest a way out.
Thank You
Aser -
Error During Activation of Interactive form
Hi SAP Masterminds,
I'm working on Interactive forms in ECC 6.0 system with proper ADS Configuration. I have created an interactive form with two fileds in the interface as <b>FIRSTNAME</b> and <b>LASTNAME</b>. Now when I'm trying to activate the form it says <b>error during activation</b>. I have <b>Adobe Reader 8.1</b> along with <b>Adobe LiveCyscle Designer 7.1</b> installed on my system. Even I have checked the programs <b>FP_TEST_00, FP_PDF_TEST_00</b> etc... to see whether ADS is configured correctly or not. They worked fine. Could you help me solve this problem by telling me what else should I check to make sure I can activate the form.
Thanks and Regards,
Maddineni.Hi,
I am facing the same problem of "Error during activation" while activating the SAP interactive form.
I am using ECC 6.0, ADL 7.1 and Adobe reader 8.0
Could you please suggest a way out.
Thank You
Aser -
Can't sign in to FaceTime or IMessage just keeps reading error during activation
CCan't sign into FaceTime or IMessage says error during activation help!!!
Hey June762,
Sorry to hear you are having these issues with your iPad. If you continue to get activation errors in FaceTime or Messages, you may find the info and troubleshooting steps outlined in the following article helpful:
If you get an error when trying to activate iMessage or FaceTime - Apple Support
Cheers,
- Brenden -
Error during activation of NitroX Free JSP Editor
Thank you for downloading NitroX.
If you experienced an error during the activation of the NitroX Free JSP Editor due to an earlier trial version already installed, please click the following link to activate the product and this will resolve the issue:
https://devclub.m7.com/getFreeJsp.do
If you have any other questions please do not hesitate to contact us.
M7 SupportI activated NitroX fine last night at home, but I tried it at work which uses a proxy server, and it's failing activation.I then tried manually pasting the code from the web site as mentioned in this post, but when I hit OK it just says that NitroX will not be available.
I am having the same problem. -
Error during activation of DSO - Activation of M records from DataStore obj
Hi All,
Below is the error i am getting while activating the DSO, Even though similar post on this topic, solution not mentioned, any solution greatly appreciable.
When -
During Activation of DSO
State of DSO -
Request become "RED", It is available for reporting, some records in Active table, some in new table and some in new table.
Job Log -
Error when inserting the data record for data package
Process 000105 returned with errors
Error when inserting the data record for data package
Process 000106 returned with errors
Process 000107 returned with errors
Data pkgs 000001; Added records 1-; Changed records 0; Deleted records 0
Log for activation request ODSR_4GXKRYHMY97R9U62M6U52XXXY data package 000001...000001
Errors occured when carrying out activation
Analyze errors and activate again, if necessary
Activation of M records from DataStore object Z_DSPO terminated
Report RSODSACT1 ended with errors
Job cancelled after system exception ERROR_MESSAGE
Detail log -
Error when inserting the data record for data package 106
Message no. RSODSO_PROCESSING002
Diagnosis
Failed to store data records persistently. Possible causes are:
You tried to save a record that is already stored in the database.
This error only occurs with DataStore objects with option "Unique Data Records".
A unique index was created for the table of active data.
You can check this in the Data Warehousing Workbench by choosing "Display" for the DataStore object and opening the "Indexes" folder.
There is a technical problem on the database.
Thanks,HI PT,
I am also getting the same error like i have loaded the data into DSO and tried to activate the init request but it has become red and checked in log found that there are some SID Generation errors so please give me the step by step solution.
SID Generation
Data Package 000056
Data Package 000064.
Thanks in advance,
Jay -
Error during activation process
hi all,
i have"error occured during activation process" DSO...but the request is available for reporting.what do i do?
thanksHello Dear
In the setting of infopackage you have following options
a. No update, no reporting (default)
If errors occur, the system terminates the update of the entire data package. The request is not released for reporting. However, the system continues to check the records.
b.Update valid records, no reporting (request red)
This option allows you to update valid data. This data is only released for reporting after the administrator checks the incorrect records that have not been updated and manually releases the request (using a QM action, that is, by setting the Overall status on the Status tab page in the monitor).
c.Update valid records, reporting possible
Valid records can be reported immediately. Automatic follow-up actions, such as adjusting the aggregates, are also carried out.
Check if you have selected the third option
Thanks
Tripple k -
Hexadecimal error during activation of DSO from datasource
hi guys,
im facing this error during DSO data activation:
Value '"1st anniversary,birthday & staff party"' (hex. '2200310073007400200061006E006E00690076006500720073') of characteristic ZTXOSIK1 contains invalid characters
is there any routine that i can put in transformation to fix this error.. please advice.Hi,
Long back i faced this Hex Values issue, i used the below code in the charecterictic routine of transforamtions
my source field was: TXZ01
my target infoObject was : ZMAT_TXT
please find the code below which i used, first read it and do the needful changes as per your requirement
FIELD-SYMBOLS: <ic> TYPE x.
DATA: hex_count LENGTH 2 TYPE n.
DATA: char_count LENGTH 2 TYPE n.
DATA: x8 LENGTH 2 TYPE x.
DATA:
hex1(64) TYPE x VALUE
'00000020000100200002002000030020000400200005002000060020000700200008'
'002000090020000A0020000B0020000C0020000D0020000E0020000F0020',
hex2(64) TYPE x VALUE
'00100020001100200012002000130020001400200015002000160020001700200018'
'002000190020001A0020001B0020001C0020001D0020001E0020001F0020'.
IF SOURCE_FIELDS-txz01 = ' '.
RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD.
ENDIF.
RESULT = SOURCE_FIELDS-txz01.
hex_count = 0.
char_count = 0.
0000---001F
ASSIGN RESULT TO <ic> CASTING TYPE x.
DO.
MOVE <ic>+hex_count(2) TO x8.
SEARCH hex1 FOR x8 IN Byte MODE.
IF sy-subrc <> 0.
SEARCH hex2 FOR x8 IN BYTE MODE.
IF sy-subrc = 0.
result+char_count(1) = ' '.
ENDIF.
ELSE.
result+char_count(1) = ' '.
ENDIF.
IF hex_count < 78.
ADD 2 TO hex_count.
ENDIF.
ADD 1 TO char_count.
IF char_count >= 40.
EXIT.
ENDIF.
ENDDO.
Regards
Reddy A
Maybe you are looking for
-
Thanks in Million in advance for the help. 1. 0RECORDMODE CONCEPT IN BW (if you explain With ex. will be great) 2. In Delta support for Generic extraction what's the difference b/w numeric pointer, time stamp, fiscal year. (if you explain with ex. wi
-
TS1717 Microsoft Visual C++ Runtime Library and iTunes
When attempting to open my iTunes, I am receiving the following messages: 1. Misrosoft Visual C++ Runtime Library Runtime Error Program:C:\Program Files\iTunes\iTunes.exe R6034 An application has made an attempt to load the C runtime
-
APPS Adapter (ESB) error while reading standard business event
Hi, I tested the sample services on TEST (myhost:7780) to consume the standard business event (oracle.apps.ar.hz.PartySite.create). Following exceptions are logged in j2ee log files (Section-1). The business event message is also rejected (see sectio
-
Hi, We wish to integrate CAD desktop with DMS. Could you share the integration aspects that need to be considered for parameter mapping for the sa,e?
-
Hi.. Cant get Focus Area Selection in select drop down
Hi Guys I cant get Focus Area Selection tool despite cc showing Photoshop CC 2014 fully updated? ..... I would be most grateful for any help david