Error during activation of ODS data

Hi all,
I am getting error during activation of ODS data.
Error: Error occur during activation.
How to check , where that error exactly occurs.
Appreciating any response.

Hi Santosh,
SM37 is mainly for monitoring the back ground jobs...... both in R/3 side and BW side this is same.. just for monitoring the background jobs... fisrt by using SM36 basis people will schedule in background.. and we just identify.. which are completed and which are not completed... in SM37.
there are various status they are
PLANNED
RELEASED
CANCELLED
ACTIVE
FINISHED
READY
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a8016505211d189550000e829fbbd/frameset.htm
In Sm37 u can see the different options for background jobs, like Scheduled, released, ready,active, finished, canceled.. If u want to know the Status of the current running job, U just type the job name, user name then click execute(F8).
hope this helps
regards
Karthik
Assign points if helpful

Similar Messages

  • Error in Activation of ODS Data

    Dear All,
    I am getting this error msg while activating ODS Data, It says its not able to execute one of this statements while activation
    Program Name: GPBUJ6PU7X5TA8TLJSDOPVSU2Z7
    The program terminates at this line
    Types corresponding to Change-Log-structure
      l_s_chgdata TYPE  /BIC/B0000103000,
    The DDIC does not have an table name by /BIC/B0000103000 which the program is trying to refer, Kindly do provide me your help and input on this.
    Thanks.
    Fayak.

    Hi Siggi,
    Thnx for your reply, I did as suggested by you, activated the ODS and update rules again but it was not able to activate the data again I ran the RSRV as suggested by you i got an list of errors
    Test for Activation Program
    Active generated load program not available
    Activation Program is not Current
    Lines in temporary program: l_s_chgdata TYPE /BIC/B0000103000
    Activation program has to be generated again
    I ran the correct error but not to any avail, could you kindly guide me on this, I was previously loading data to this ODS successfully from a 300 client now I am trying to do this from an 400 client and I am facing this error.
    Thanks,
    Fayak.

  • Error Activating the ODS data

    Hi Guys,
    I am facing an error while activating the data in the ODS.
    The data is loading perfectly fine but when activating the ODS data the following error is coming
    <b>Request REQU_3ZI9CZ369HR6SM49OL9ULRVKM, data package 000031 incorrect with status 5 in rsodsacstreq
    System error occurred (RFC call)
    No confirmation for request ODSR_3ZI9DUVOMM02L1I777X5YX9QU when activating the ODS object PA_ODS1
    There is no PSA for InfoSource 8PA_OA001 and source system BWPCLNT641 ( The data laod is without PSA )</b>
    This is happening after we had a BWQ refresh .
    I thought this has something to do with the BASIS guys but they say they checked everything.
    Need Help

    Hi Sidhu,
    There were red requests in the ODS but I deleted them and tried activating the green requests , even when there are only 4 records it is not activating the data.
    I checked the RESREQDONE table but I dont see these requests in there.
    I checked the SM58 there I saw a lot of errors
    <u><b>ALEREMOTE    RSAR_TRFC_DATA_RECEIVED       BWQCLNT641    10/17/2005 18:50:48 ERROR REQU_3ZHNIS265F9F6HJQ8PY838046 PG# 21 In BW</b></u>  
    one line in that is this . can u throw some thought on this. when I try to execute this LUW it says that function module RSAR_TRFC_DATA_RECEIVED doesnot exist or exception raised message. I got these yesterday but today I got only one and when I executed that LUW it gave me the same message but that error message is not showing now
    Regards
    Majeed

  • Error while activating the ODS (high priority ticket)

    Hi BW guru's
    I am facing major issue while activating the ods i am getting this below error.
    Request REQU.....,data package 000002incorrect with status 5
    Request REQU.....,data package 000001 incorrect with status 5.
    If any1 has come across this issue pls help me out .
    I will reward the points surely.
    Cheers,
    Rakesh

    Hi,
    ODS activation error
    Re: ODS Activation Failed with Status 5
    ODS activation is failing with  incorrect with status 5 erro
    Re: Error Activating the ODS data
    ODS Activation error
    Regards,
    San!

  • Error Wjile activating the ODS

    Hi Gurus,
    I am facing an error while activating the ods please find the message shown in the job log .
    Request REQU_74JUNZ5CM70EWN1XKSP0W5KWI, data package 000024 incorrect with status 9 in rsodsacstreq
    Request REQU_74JUNZ5CM70EWN1XKSP0W5KWI, data package 000025 incorrect with status 9 in rsodsacstreq
    Request REQU_74JUNZ5CM70EWN1XKSP0W5KWI, data package 000026 incorrect with status 9 in rsodsacstreq.
    Please suggest how to activate the ods,
    Regards,
    Vikram

    Hi Vikram,
    Check data in Data Package 24,25 and 26 there is error in some of the data. this u will find Details  tab.
    Delete the request from the ODS and
    then EDIT the data in PSA and load the data in the ODS again.
    then Activate it.
    Then it wont fail.....prior to these find the records for which the activation is failing....so that u can edit in PSA.
    Thanks,
    Nagesh.

  • Error while activating 0FIGL_O02 ODS

    Hi ,
    It showing error while activating 0FIGL_O02 ODS .I have already allowed all special character "ALL_CAPITAL,.<>?/:;"{}[]||=-)(*&^%$#@!~`"'-_,ALL_CAPITAL_PLUS_HEX",but it's still showing error in particular field  0DOC_HD_TXT .
    Errror:Value 'AMITBHANDARKAR          ' (hex. '41004D00490054004200480041004E004400410052004B0041
    Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0DOC_HD_TXT
    What is the error in this name.

    Hi rajesh ,
    While activation and creating the SIDs the system will perform the sanity check which will ensure to throgh th error if u trying to load some lower cse letter to IO which doent have the u lowercase check box as checked. You can edit the IO then and also proceed with saveen suggested by processing all capital.
    Thanks,
    Deepak

  • Error During Activation of Web services

    When I try to create a web services using RFC and try to complete the steps in the wizard. I am getting error message as "Error during Activation of web services". and also when configure service in wizard, im getting only two profiles as "Basic Authorization: SOAP PROFILE" and "Secure SOAP PROFILE". Kindly do the needful.
    Moderator message: please do more research before asking, show what you have done yourself when asking.
    Edited by: Thomas Zloch on Aug 8, 2011 1:33 PM

    Olivier, thank you so much
    SOAMANAGER does not exist in my system (sp level 8), so node "/sap/bc/soap/rfc" should be active. Actually, it is active.
    I think the problem is related to user rights/profiles.
    I have tried to create another WS after assigning role SAP_BC_WEBSERVICE_ADMIN. The same error when trying to activate it, but now, I can see this WS in SE80 (under "Enterprise Services->Service Definition"). It is not active there and if I try to activate it, a success message appears indicating that user "is not authorized to use function netzwerkadministration". I cannot see any new services in SICF...
    Probably the new entry in SICF will be created after activating WS in SE80...
    Do u know what user profile should I add in order to properly activate the WS in SE80?
    Thank you very much!
    Vicente

  • Error during activation of ExternalWebServiceIntegration

    Hi All,
    Has anyone got the following error during activation of ExternalWebServiceIntegration?
    I am trying to create an ExternalWebServiceIntegration for a SOAP based ERP web service. I am able to create the ExternalWebServiceIntegration using the required WSDL file. But when I try to activate it, I get this error message.
    Any idea on what could be causing this?
    Thanks,
    Sanat

    Did you perform a "Check" and see if something's thrown at Output window?
    If you don't have enough info to debug, then I suggest you raise an incident.

  • Error during activation a message mapping

    Hi,
    I get this error during activation a message mapping:
    source code has an syntax error:
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapf1f9db20a78a11dac004000f1ff80130/source/com/sap/xi/tf/_Source2Target_.java:2: package com.sap.aii.mappingtool.tfapi does not exist import com.sap.aii.mapping.api.; import com.sap.aii.mappingtool.tfapi.; ^ 1 error
    Can anybody help me please??
    Thanks.
    Regards
    Stefan

    Hi Michal,
    I do not have deleted some libraries in the XI-Installation.
    I have some customer functions in other mappings but no message mapping without or with customer function can I activate, now.
    The mappings are in serveral software components but it is no chance to activate a message mapping.
    Regards,
    Stefan

  • Error when activating the master data

    Hi
    I am getting the following error when activating the master data. when using IDOC as transfer method in transfer rules
    <b>Error while creating table 'EDISEGMENT' entry '/BIC/CIRB0CLASS_NUM_TEXT'</b>
    If anyone came across this kind of problem plz share the solution.
    Regards
    Annie

    Hi
    I solved the problem. AFter changing from PSA to IDOC, i just saved first and activated. it got activated. But thanks for the response.
    There are no short dumps in ST22
    Regards
    Annie

  • Error during activation in adobe form

    Hi Guys,
       While activating the adobe form i am getting the error message as 'Error during activation' with out any futher details.Its not showing any error details.Appreciate you for your help.
    Regards
    Syed

    Hi,
    I am facing the same problem of "Error during activation" while activating the SAP interactive form.
    I am using ECC 6.0, ADL 7.1 and Adobe reader 8.0
    Could you please suggest a way out.
    Thank You
    Aser

  • Error During Activation while activating Report Selection Texts

    Hi,
         I've developed a report and the Transport Request for the Report has been migrated to Quality and Production Systems. Now, I have to make some more changes where I had to create another request.
    Now, while activating the Selection Texts for the Report under the New Transport Request, it gives me an error message saying "Error During Activation". Could somebody tell me the reason and resolution for this error?
    Thanks and Regards,
    Venkat

    Hi ,
    Try activating it through se80 , as it activates the complete object .
    In inactive head , with your user id see all the inactive object , may be there you can find the program , or the texts . Activate and see.
    Regards,
    Sureshp.

  • Error during activation of text elements

    Hello All,
    I have a problem activating the text elements of a program. The
    text elements can be edited but can not be activated. It displays an error during activation prompt.I tried deleteing it and recreating but still does not work.
    Thanks in advance for all the help.
    Rgds,
    Anju

    Have a look at:
    Selection Text Activation
    Amit.

  • Error during activation in Text Elements

    Hi All,
    I am getting ' Error during activation ' in Text Symbol While Creating new transport request.
    and in Changing mode it's shows inactive mode For Previous Transport request user.
    Please Suggest any Solution For that .
    Thanks & Regards,
    Manish

    Hi Mahesh,
    The Previous User Request already released .There is on Button there (active/inactive).
    When i click this button it goes to display mode and shows status as active.
    but when i click change mode it shows status as in active.
    Thanks & regards,
    Manish

  • Error during activation of adobe non-interactive form

    Hello everyone,
    I am trying to activate a non-interactive adobe form and am getting the below error:-
    "Field p_lifnr has a conversion routine(see SAP note 796755)".
    I have made sure that this field (which is corresponding to LFA1-lifnr) has context binding, I even tried using below code in its interface:-
    GET PARAMETER ID 'LIF' FIELD p_lifnr.
    and also tried the below:-
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
            EXPORTING
              input  = p_lifnr
            IMPORTING
              output = p_lifnr.
    just in case..
    but all above in vain,can someone let me know what might be the problem....or where would I find this 'SAP note 796755' ?
    Thanks,
    Rachna.

    Hi,
    I am facing the same problem of "Error during activation" while activating the SAP interactive form.
    I am using ECC 6.0, ADL 7.1 and Adobe reader 8.0
    Could you please suggest a way out.
    Thank You
    Aser

Maybe you are looking for