Error during duplicate database.
Hi All,
db - 9.2.0.8.0
OS - Win 2003 server
I was rying to duplicate db on the same server. Please go through the following massage.
printing stored script: Memory Script
set until scn 14420521;
recover
clone database
delete archivelog
executing script: Memory Script
Note, at this point my database was apperead to hang for long time. it was around 2 hour and then revert back with the following
executing command: SET until clause
Starting recover at 18-SEP-08
starting media recovery
archive log thread 1 sequence 7 is already on disk as file D:\BCKUP\ARCHIVE\ARCH_7.ARC
archive log thread 1 sequence 8 is already on disk as file D:\BCKUP\ARCHIVE\ARCH_8.ARC
archive log thread 1 sequence 9 is already on disk as file D:\BCKUP\ARCHIVE\ARCH_9.ARC
archive log thread 1 sequence 10 is already on disk as file D:\BCKUP\ARCHIVE\ARCH_10.ARC
archive log thread 1 sequence 11 is already on disk as file D:\BCKUP\ARCHIVE\ARCH_11.ARC
archive log thread 1 sequence 12 is already on disk as file D:\BCKUP\ARCHIVE\ARCH_12.ARC
archive log filename=D:\BCKUP\ARCHIVE\ARCH_7.ARC thread=1 sequence=7
archive log filename=D:\BCKUP\ARCHIVE\ARCH_8.ARC thread=1 sequence=8
archive log filename=D:\BCKUP\ARCHIVE\ARCH_9.ARC thread=1 sequence=9
archive log filename=D:\BCKUP\ARCHIVE\ARCH_10.ARC thread=1 sequence=10
archive log filename=D:\BCKUP\ARCHIVE\ARCH_11.ARC thread=1 sequence=11
archive log filename=D:\BCKUP\ARCHIVE\ARCH_12.ARC thread=1 sequence=12
media recovery complete
Finished recover at 18-SEP-08
printing stored script: Memory Script
shutdown clone;
startup clone nomount ;
executing script: Memory Script
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/18/2008 20:11:45
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-01013: user requested cancel of current operation
hare krishna
Alok
Alok do you have user that still active at auxiliary instance ,exit from that auxilairy session after doing database in nomount and then retry the duplicate process.
Khurram
Similar Messages
-
RMAN-00600 Error during Duplicate
RDBMS Version: 8.1.6
Operating System and Version: NT 4.0
Error Number (if applicable): RMAN-00600
Product: Recovery Manager
Product Version: 8.1.6
RMAN Duplicate Database Error (RMAN-00600)
While running the following command:
run {
allocate auxiliary channel ch1 type disk;
allocate auxiliary channel ch2 type disk;
duplicate target database to db1backup nofilenamecheck;
I get the following errors:
RMAN-03022: compiling command: Duplicate Db
RMAN-00571: =========================================================
RMAN-00569: ================ ERROR MESSAGE STACK FOLLOWS ============
RMAN-00571: =========================================================
RMAN-00601: fatal error in recovery manager
RMAN-03012: fatal error during compilation of command
RMAN-03028: fatal error code: 600
RMAN-03013: command type: Duplicate Db
RMAN-00600: internal error, arguments [14036] [-11] [29] [
CHARACTER SET %s
] [WE8ISO8859P1]
Any ideas as to what may be causing this? I have successfully backed up the target database, the connections to the target and auxiliary databases are fine, and I'm using a controlfile vs. a catalog.
Mike McAndrew
[email protected]
nullHi
Duplicate databases with RMAN is not as simple as it seems, look at message colled "Duplicate database error with RMAN"
This maybe could help you.
Anyway, I saw the message:
"internal error, arguments [14036] [-11] [29] [CHARACTER SET %s] [WE8ISO8859P1] "
What NLS configuration have you?
A10!
null -
Error while duplicate database for standby
Hello Guys,
Both of my database are 10gR2 and Linux is the operating system.
I am trying to create a standby database for my production database.
I have matched the directory structure of primary and standby database and there is no conflict. Directory permissions are also set.
After taking the rman backup from production database when i connect auxiliary database from production. I run this command to duplicate database and create standby database.
rman
set until sequence XXXX;
duplicate target database for standby dorecover nofilenamecheck;
I get this error:
executing Memory Script
executing command: SET until clause
Starting restore at 04-JUN-11
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backupset restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /tmp/backup_files/standby_control_1jme2far_1_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/04/2011 21:00:37
RMAN-03015: error occurred in stored script Memory Script
ORA-19870: error reading backup piece /tmp/backup_files/standby_control_1jme2far_1_1
ORA-01565: error in identifying file '/u01/app/oracle/product/10.2.0/db_1/dbs/spfileORCL.ora'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
*/tmp/backup_files/standby_control_1jme2far_1_1 file exists*
* spfileORCL.ora* exists on both servers in same directory and same path.
Can you please suggest where is the problem?
Thank you so much.
ImranORA-19870: error reading backup piece /tmp/backup_files/standby_control_1jme2far_1_1
ORA-01565: error in identifying file '/u01/app/oracle/product/10.2.0/db_1/dbs/spfileORCL.ora'
ORA-27037: unable to obtain file statusLinux-x86_64 Error: 2: No such file or directory
Might the backup piece not exist or file is unae to read at this time. Can you check is this physically exist Or not?
And preferred to take new fresh backup and perform duplicate -
Error while duplicate database from one server to another server
Hi there,
I am practicing duplicate database from one single database server to another server. Hardware and driver path on 2 machines is the same. Here are my steps:
--------------------- Clone site:
1. modify listener.ora with content:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracle
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = orcl)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
(SID_NAME= orcl)
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = ON
2. stop and start listener again, message show like :
Service “orcl” has 1 instance(s).
Instance “orcl”, status UNKNOWN, has 1 handler(s) for this service…
The command completed successfully
3. create pfile from spfile.
4. shutdown and startup nomount with pfile is new pfile create from step 3.
--------------------------------------- Source site
1. modify tnsnames.ora with content like:
VVCOREDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = vvcoredb)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = 10.254.1.235) (PORT=1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
2. run command from rman like these:
rman> connect target sys@vvcoredb
rman> target database Password:
rman> connect auxiliary sys@orcl
rman> auxiliary database Password:
rman> DUPLICATE TARGET DATABASE to orcl from active database spfile nofilenamecheck;
Then the result show below:
Starting Duplicate Db at 24-SEP-12
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=63 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/db_1/dbs/spfilevvcoredb.ora' auxiliary format
'/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora' ;
sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora''";
executing Memory Script
Starting backup at 24-SEP-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=74 device type=DISK
Finished backup at 24-SEP-12
sql statement: alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora''
contents of Memory Script:
sql clone "alter system set db_name =
''ORCL'' comment=
''duplicate'' scope=spfile";
shutdown clone immediate;
startup clone nomount;
executing Memory Script
sql statement: alter system set db_name = ''ORCL'' comment= ''duplicate'' scope=spfile
Oracle instance shut down
connected to auxiliary database (not started)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/24/2012 17:44:12
RMAN-03015: error occurred in stored script Memory Script
RMAN-04014: startup failed: ORA-01261: Parameter db_recovery_file_dest destination string cannot be translated
ORA-01262: Stat failed on a file destination directory
Linux-x86_64 Error: 2: No such file or directory
I don't know what wrong with my pfile? I specify correct my pfile on clone site like this:
orcl.__db_cache_size=1476395008
orcl.__java_pool_size=16777216
orcl.__large_pool_size=16777216
orcl.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
orcl.__pga_aggregate_target=1342177280
orcl.__sga_target=1979711488
orcl.__shared_io_pool_size=0
orcl.__shared_pool_size=436207616
orcl.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/orcl/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u01/app/oracle/oradata/orcl/control01.ctl','/u01/app/oracle/flash_recovery_area/orcl/control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_name='orcl'
*.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area/vvcoredb'
*.db_recovery_file_dest_size=4070572032
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=orclXDB)'
*.memory_target=3313500160
*.open_cursors=300
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.undo_tablespace='UNDOTBS1'
Please suggest me do i miss some steps when try to duplicate database?
Any suggestions are welcome.
Thanks in advance!
P/s: Sorry for my bad English.Oh god, it worked. Thank you. But i got another problem like this:
duplicate target database to orcl from active database spfile set "db_recovery_file_dest" = "/u01/app/oracle/flash_recovery_area/vvcoredb" nofilenamecheck;
Starting Duplicate Db at 24-SEP-12
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=63 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/db_1/dbs/spfilevvcoredb.ora' auxiliary format
'/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora' ;
sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora''";
executing Memory Script
Starting backup at 24-SEP-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=74 device type=DISK
Finished backup at 24-SEP-12
sql statement: alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora''
contents of Memory Script:
sql clone "alter system set db_name =
''ORCL'' comment=
''duplicate'' scope=spfile";
sql clone "alter system set db_recovery_file_dest =
''/u01/app/oracle/flash_recovery_area/vvcoredb'' comment=
'''' scope=spfile";
shutdown clone immediate;
startup clone nomount;
executing Memory Script
sql statement: alter system set db_name = ''ORCL'' comment= ''duplicate'' scope=spfile
sql statement: alter system set db_recovery_file_dest = ''/u01/app/oracle/flash_recovery_area/vvcoredb'' comment= '''' scope=spfile
Oracle instance shut down
connected to auxiliary database (not started)
Oracle instance started
Total System Global Area 3307048960 bytes
Fixed Size 2217872 bytes
Variable Size 1811941488 bytes
Database Buffers 1476395008 bytes
Redo Buffers 16494592 bytes
contents of Memory Script:
sql clone "alter system set db_name =
''VVCOREDB'' comment=
''Modified by RMAN duplicate'' scope=spfile";
sql clone "alter system set db_unique_name =
''ORCL'' comment=
''Modified by RMAN duplicate'' scope=spfile";
shutdown clone immediate;
startup clone force nomount
backup as copy current controlfile auxiliary format '/u01/app/oracle/oradata/vvcoredb/control01.ctl';
restore clone controlfile to '/u01/app/oracle/recovery_area/vvcoredb/control02.ctl' from
'/u01/app/oracle/oradata/vvcoredb/control01.ctl';
alter clone database mount;
executing Memory Script
sql statement: alter system set db_name = ''VVCOREDB'' comment= ''Modified by RMAN duplicate'' scope=spfile
sql statement: alter system set db_unique_name = ''ORCL'' comment= ''Modified by RMAN duplicate'' scope=spfile
Oracle instance shut down
Oracle instance started
Total System Global Area 3307048960 bytes
Fixed Size 2217872 bytes
Variable Size 1811941488 bytes
Database Buffers 1476395008 bytes
Redo Buffers 16494592 bytes
Starting backup at 24-SEP-12
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile copy
copying current control file
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/24/2012 18:42:09
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 09/24/2012 18:42:09
ORA-17628: Oracle error 19505 returned by remote Oracle server
I have a comment that source site doesn't have flash_recovery_area, instead it's name is recovery_area, is it problem?
Edited by: 788420 on Sep 24, 2012 4:44 AM -
Errors during duplicating database.
Hello,
I'm duplicating my database (using RMAN) and I get the following error:
contents of Memory Script:
shutdown clone;
startup clone nomount;
executing Memory Script
database dismounted
Oracle instance shut down
RMAN-00571(...)
RMAN-04006:error from auxiliary database: ORA-12514: TNS: listener doesn not currently know of service requested in connect descriptor.
It's 10.2 database on Linux. Auxiliary database is named 'aux'
Tnsnames.ora and listener.ora seems to be ok, since I could connect to this instance (while it was in nomount state, before duplicating in RMAN) using
sqlplus sys/***@aux as sysdba
After I got the error I connected to aux using Bequeath, and checked it's status. It is shutdown since I got the error:
ORA-01034: ORACLE not available.
What can I do?
Thx. in advance
Aliq.On 9i, Oracle registers itself with the database when the database is opened.
This means in any other state you need to use SID= in your tnsnames.ora.
From your post it looks like this still applies to 10g.
I would try changing my tnsnames.ora.
You could of course, immediately after receiving the error, run lsnrctl services and check whether the service_name of the aux database is listed.
Sybrand Bakker
Senior Oracle DBA -
Error during "duplicate target ... from active database"
hi:
RMAN duplicate failure after the auxiliary instance mounted,we want to create a physical standby database .
Platform: solaris10 spark 64bit
Version: 11.2.0.1.5 (both primary and standby)
thank you..
RMAN log:
rman target sys/password@his_primary auxiliary sys/password@his_standby_tt
Recovery Manager: Release 11.2.0.1.0 - Production on Thu Aug 30 15:40:06 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: HIS (DBID=3271178181)
connected to auxiliary database: HIS (not mounted)
RMAN> duplicate target database for standby from active database;
Starting Duplicate Db at 30-AUG-12
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=2833 device type=DISK
allocated channel: ORA_AUX_DISK_2
channel ORA_AUX_DISK_2: SID=3399 device type=DISK
allocated channel: ORA_AUX_DISK_3
channel ORA_AUX_DISK_3: SID=3966 device type=DISK
allocated channel: ORA_AUX_DISK_4
channel ORA_AUX_DISK_4: SID=3 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/oracle/product/11.2.0/db_1/dbs/orapwhis' auxiliary format
'/u01/app/oracle/product/11.2.0/db_1/dbs/orapwhis' ;
executing Memory Script
Starting backup at 30-AUG-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1570 device type=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: SID=1708 device type=DISK
allocated channel: ORA_DISK_3
channel ORA_DISK_3: SID=1851 device type=DISK
allocated channel: ORA_DISK_4
channel ORA_DISK_4: SID=1995 device type=DISK
Finished backup at 30-AUG-12
contents of Memory Script:
backup as copy current controlfile for standby auxiliary format '/u01/app/oradata/his/control01.ctl';
restore clone controlfile to '/u01/app/oradata/his/control02.ctl' from
'/u01/app/oradata/his/control01.ctl';
restore clone controlfile to '/u01/app/oradata/his/control03.ctl' from
'/u01/app/oradata/his/control01.ctl';
executing Memory Script
Starting backup at 30-AUG-12
using channel ORA_DISK_1
using channel ORA_DISK_2
using channel ORA_DISK_3
using channel ORA_DISK_4
channel ORA_DISK_1: starting datafile copy
copying standby control file
output file name=/export/home/oracle/snap.f tag=TAG20120830T154059 RECID=9 STAMP=792690060
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
Finished backup at 30-AUG-12
Starting restore at 30-AUG-12
using channel ORA_AUX_DISK_1
using channel ORA_AUX_DISK_2
using channel ORA_AUX_DISK_3
using channel ORA_AUX_DISK_4
channel ORA_AUX_DISK_2: skipped, AUTOBACKUP already found
channel ORA_AUX_DISK_3: skipped, AUTOBACKUP already found
channel ORA_AUX_DISK_4: skipped, AUTOBACKUP already found
channel ORA_AUX_DISK_1: copied control file copy
Finished restore at 30-AUG-12
Starting restore at 30-AUG-12
using channel ORA_AUX_DISK_1
using channel ORA_AUX_DISK_2
using channel ORA_AUX_DISK_3
using channel ORA_AUX_DISK_4
channel ORA_AUX_DISK_2: skipped, AUTOBACKUP already found
channel ORA_AUX_DISK_3: skipped, AUTOBACKUP already found
channel ORA_AUX_DISK_4: skipped, AUTOBACKUP already found
channel ORA_AUX_DISK_1: copied control file copy
Finished restore at 30-AUG-12
contents of Memory Script:
sql clone 'alter database mount standby database';
executing Memory Script
sql statement: alter database mount standby database
contents of Memory Script:
set newname for tempfile 1 to
"/u01/app/oradata/his/temp.266.750421813";
set newname for tempfile 2 to
"/u01/app/oradata/his/ts_temp_patrol.298.750425277";
set newname for tempfile 3 to
"/u01/app/oradata/his/ts_his_temp.296.750427905";
set newname for tempfile 4 to
"/u01/app/oradata/his/ts_tjjk_temp.282.750427917";
set newname for tempfile 5 to
"/u01/app/oradata/his/ts_temp_shuhao.595.782919539";
switch clone tempfile all;
set newname for datafile 1 to
"/u01/app/oradata/his/system.256.750421615";
set newname for datafile 2 to
"/u01/app/oradata/his/sysaux.257.750421615";
set newname for datafile 3 to
"/u01/app/oradata/his/undotbs1.258.750421615";
set newname for datafile 4 to
"/u01/app/oradata/his/users.259.750421615";
set newname for datafile 5 to
"/u01/app/oradata/his/ts_his.280.750425023";
set newname for datafile 6 to
"/u01/app/oradata/his/ts_his_index.281.750425025";
set newname for datafile 7 to
"/u01/app/oradata/his/system.569.754307341";
set newname for datafile 8 to
"/u01/app/oradata/his/ts_bj.283.750425027";
set newname for datafile 9 to
"/u01/app/oradata/his/ts_gt.284.750425027";
set newname for datafile 10 to
"/u01/app/oradata/his/ts_fx.285.750425027";
set newname for datafile 11 to
"/u01/app/oradata/his/ts_uap.286.750425029";
set newname for datafile 12 to
"/u01/app/oradata/his/ts_gkxj.287.750425029";
set newname for datafile 13 to
"/u01/app/oradata/his/ts_xejj.288.750425031";
set newname for datafile 14 to
"/u01/app/oradata/his/ts_zdzyrz.289.750425031";
set newname for datafile 15 to
"/u01/app/oradata/his/ts_zj.290.750425033";
set newname for datafile 16 to
"/u01/app/oradata/his/ts_jgcp.291.750425033";
set newname for datafile 17 to
"/u01/app/oradata/his/ts_gtbj.292.750425033";
set newname for datafile 18 to
"/u01/app/oradata/his/ts_base.293.750425035";
set newname for datafile 19 to
"/u01/app/oradata/his/ts_exdata.294.750425035";
set newname for datafile 20 to
"/u01/app/oradata/his/ts_tjjk.295.750425037";
set newname for datafile 21 to
"/u01/app/oradata/his/ts_shuhao.594.782919537";
set newname for datafile 22 to
"/u01/app/oradata/his/ts_patrol.297.750425037";
backup as copy reuse
datafile 1 auxiliary format
"/u01/app/oradata/his/system.256.750421615" datafile
2 auxiliary format
"/u01/app/oradata/his/sysaux.257.750421615" datafile
3 auxiliary format
"/u01/app/oradata/his/undotbs1.258.750421615" datafile
4 auxiliary format
"/u01/app/oradata/his/users.259.750421615" datafile
5 auxiliary format
"/u01/app/oradata/his/ts_his.280.750425023" datafile
6 auxiliary format
"/u01/app/oradata/his/ts_his_index.281.750425025" datafile
7 auxiliary format
"/u01/app/oradata/his/system.569.754307341" datafile
8 auxiliary format
"/u01/app/oradata/his/ts_bj.283.750425027" datafile
9 auxiliary format
"/u01/app/oradata/his/ts_gt.284.750425027" datafile
10 auxiliary format
"/u01/app/oradata/his/ts_fx.285.750425027" datafile
11 auxiliary format
"/u01/app/oradata/his/ts_uap.286.750425029" datafile
12 auxiliary format
"/u01/app/oradata/his/ts_gkxj.287.750425029" datafile
13 auxiliary format
"/u01/app/oradata/his/ts_xejj.288.750425031" datafile
14 auxiliary format
"/u01/app/oradata/his/ts_zdzyrz.289.750425031" datafile
15 auxiliary format
"/u01/app/oradata/his/ts_zj.290.750425033" datafile
16 auxiliary format
"/u01/app/oradata/his/ts_jgcp.291.750425033" datafile
17 auxiliary format
"/u01/app/oradata/his/ts_gtbj.292.750425033" datafile
18 auxiliary format
"/u01/app/oradata/his/ts_base.293.750425035" datafile
19 auxiliary format
"/u01/app/oradata/his/ts_exdata.294.750425035" datafile
20 auxiliary format
"/u01/app/oradata/his/ts_tjjk.295.750425037" datafile
21 auxiliary format
"/u01/app/oradata/his/ts_shuhao.594.782919537" datafile
22 auxiliary format
"/u01/app/oradata/his/ts_patrol.297.750425037" ;
sql 'alter system archive log current';
executing Memory Script
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
renamed tempfile 1 to /u01/app/oradata/his/temp.266.750421813 in control file
renamed tempfile 2 to /u01/app/oradata/his/ts_temp_patrol.298.750425277 in control file
renamed tempfile 3 to /u01/app/oradata/his/ts_his_temp.296.750427905 in control file
renamed tempfile 4 to /u01/app/oradata/his/ts_tjjk_temp.282.750427917 in control file
renamed tempfile 5 to /u01/app/oradata/his/ts_temp_shuhao.595.782919539 in control file
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting backup at 30-AUG-12
using channel ORA_DISK_1
using channel ORA_DISK_2
using channel ORA_DISK_3
using channel ORA_DISK_4
channel ORA_DISK_1: starting datafile copy
input datafile file number=00008 name=+DATA/his/datafile/ts_bj.283.750425027
channel ORA_DISK_2: starting datafile copy
input datafile file number=00009 name=+DATA/his/datafile/ts_gt.284.750425027
channel ORA_DISK_3: starting datafile copy
input datafile file number=00005 name=+DATA/his/datafile/ts_his.280.750425023
channel ORA_DISK_4: starting datafile copy
input datafile file number=00015 name=+DATA/his/datafile/ts_zj.290.750425033
RMAN-03009: failure of backup command on ORA_DISK_3 channel at 08/30/2012 16:10:23
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
channel ORA_DISK_3 disabled, job failed on it will be run on another channel
RMAN-03009: failure of backup command on ORA_DISK_4 channel at 08/30/2012 16:42:19
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
channel ORA_DISK_4 disabled, job failed on it will be run on another channel
RMAN-03009: failure of backup command on ORA_DISK_2 channel at 08/30/2012 16:51:58
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
channel ORA_DISK_2 disabled, job failed on it will be run on another channel
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 08/30/2012 17:49:09
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
channel ORA_DISK_1 disabled, job failed on it will be run on another channel
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 08/30/2012 17:49:09
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_4 channel at 08/30/2012 16:42:19
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
RMAN-03009: failure of backup command on ORA_DISK_2 channel at 08/30/2012 16:51:58
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 08/30/2012 17:49:09
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
RMAN-03009: failure of backup command on ORA_DISK_3 channel at 08/30/2012 16:10:23
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
RMAN>
Primary database alert log:
Thu Aug 30 15:41:00 2012
Clearing standby activation ID 3277937203 (0xc3615a33)
The primary database controlfile was created using the
'MAXLOGFILES 16' clause.
There is space for up to 11 standby redo logfiles
Use the following SQL commands on the standby database to create
standby redo logfiles that match the primary database:
ALTER DATABASE ADD STANDBY LOGFILE 'srl1.f' SIZE 536870912;
ALTER DATABASE ADD STANDBY LOGFILE 'srl2.f' SIZE 536870912;
ALTER DATABASE ADD STANDBY LOGFILE 'srl3.f' SIZE 536870912;
ALTER DATABASE ADD STANDBY LOGFILE 'srl4.f' SIZE 536870912;
ALTER DATABASE ADD STANDBY LOGFILE 'srl5.f' SIZE 536870912;
ALTER DATABASE ADD STANDBY LOGFILE 'srl6.f' SIZE 536870912;
WARNING: OMF is enabled on this database. Creating a physical
standby controlfile, when OMF is enabled on the primary
database, requires manual RMAN intervention to resolve OMF
datafile pathnames.
NOTE: Please refer to the RMAN documentation for procedures
describing how to manually resolve OMF datafile pathnames.
Thu Aug 30 16:10:13 2012
Errors in file /u01/oracle/diag/rdbms/his_primary/his/trace/his_ora_25860.trc (incident=72361):
ORA-00600: internal error code, arguments: [1868], [0xFFFFFFFF7BBD4988], [], [], [], [], [], [], [], [], [], []
Incident details in: /u01/oracle/diag/rdbms/his_primary/his/incident/incdir_72361/his_ora_25860_i72361.trc
Thu Aug 30 16:10:20 2012
Trace dumping is performing id=[cdmp_20120830161020]
Thu Aug 30 16:10:22 2012
Sweep [inc][72361]: completed
Sweep [inc2][72361]: completed
Thu Aug 30 16:40:32 2012
Thread 1 cannot allocate new log, sequence 3031
Private strand flush not complete
Current log# 4 seq# 3030 mem# 0: +DATA/his_primary/onlinelog/group_4.579.759345057
Current log# 4 seq# 3030 mem# 1: /backup/odsdb/HIS_PRIMARY/onlinelog/o1_mf_4_74nf15rq_.log
Thread 1 advanced to log sequence 3031 (LGWR switch)
Current log# 5 seq# 3031 mem# 0: +DATA/his_primary/onlinelog/group_5.261.759345075
Current log# 5 seq# 3031 mem# 1: /backup/odsdb/HIS_PRIMARY/onlinelog/o1_mf_5_74nf1q2g_.log
Thu Aug 30 16:40:37 2012
LNS: Standby redo logfile selected for thread 1 sequence 3031 for destination LOG_ARCHIVE_DEST_2
Thu Aug 30 16:40:39 2012
Archived Log entry 5829 added for thread 1 sequence 3030 ID 0xffffffffc3615a33 dest 1:
Thu Aug 30 16:42:15 2012
Errors in file /u01/oracle/diag/rdbms/his_primary/his/trace/his_ora_25862.trc (incident=72369):
ORA-00600: internal error code, arguments: [1868], [0xFFFFFFFF7BBD4988], [], [], [], [], [], [], [], [], [], []
Incident details in: /u01/oracle/diag/rdbms/his_primary/his/incident/incdir_72369/his_ora_25862_i72369.trc
Thu Aug 30 16:42:17 2012
Trace dumping is performing id=[cdmp_20120830164217]
Thu Aug 30 16:42:17 2012
Sweep [inc][72369]: completed
Sweep [inc2][72369]: completed
Thu Aug 30 16:51:53 2012
Errors in file /u01/oracle/diag/rdbms/his_primary/his/trace/his_ora_25858.trc (incident=72353):
ORA-00600: internal error code, arguments: [1868], [0xFFFFFFFF7BBD4988], [], [], [], [], [], [], [], [], [], []
Incident details in: /u01/oracle/diag/rdbms/his_primary/his/incident/incdir_72353/his_ora_25858_i72353.trc
Thu Aug 30 16:51:55 2012
Sweep [inc][72353]: completed
Sweep [inc2][72353]: completed
Thu Aug 30 16:51:55 2012
Trace dumping is performing id=[cdmp_20120830165155]
Edited by: 960892 on 2012-9-24 上午2:22hi:
this is the initialization parameter file for auxiliary instance:
*.audit_file_dest='/u01/oracle/admin/his/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u01/app/oradata/his/control01.ctl','/u01/app/oradata/his/control02.ctl','/u01/app/oradata/his/control03.ctl'
*.db_block_size=8192
*.db_domain='abc.com.cn'
*.db_file_name_convert='+DATA/his/datafile/','/u01/app/oradata/his/','+DATA/his/tempfile/','/u01/app/oradata/his/','+DATA/his_primary/datafile/','/u01/app/oradata/his/','+DATA/his_primary/tempfile/','/u01/app/oradata/his/'
*.db_files=1000
*.db_name='his'
*.db_recovery_file_dest='/backup/oracle'
*.db_recovery_file_dest_size=1073741824000
*.db_unique_name='his_standby_tt'
*.diagnostic_dest='/u01/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=hisXDB)'
*.fal_client='his_standby_tt'
*.fal_server='his_primary'
*.log_archive_config='DG_CONFIG=(his_primary,his_standby_tt)'
*.log_archive_dest_1='LOCATION=/backup/oracle/HIS_STANDBY_TT/archivelog VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=his_standby_tt'
*.log_archive_dest_2='SERVICE=his_primary LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=his_primary'
*.log_archive_dest_state_1='enable'
*.log_archive_dest_state_2='enable'
*.log_file_name_convert='+DATA/his_primary/onlinelog/','/u01/app/oradata/his/','/backup/odsdb/HIS_PRIMARY/onlinelog/','/u01/app/oradata/his/'
*.memory_target=2181038080
*.nls_language='SIMPLIFIED CHINESE'
*.nls_territory='CHINA'
*.open_cursors=300
*.processes=3000
*.remote_login_passwordfile='EXCLUSIVE'
*.service_names='his.abc.com.cn,his_standby_tt.abc.com.cn'
*.sessions=3305
*.standby_file_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.event='10298 trace name context forever, level 32' -
Facing error during Oracle Database Express Edition Installation
Hi,
I'm trying to install Oracle database XE on my system (Windows XP Service Pack 3) and keep getting an error "failed to load dll chkportdl2"" while trying to do so.
While researching on a fix,I came across a solution that suggested uninstall of XP service pack 3 during installation and reinstall later.
Now,I dont see an option for "Windows XP Service Pack 3" in "Add/Remove Programs".
I believe Windows XP OBI comes up pre-loaded with Windows XP Service Pack 3 and am not sure if I can uninstall it.
I looked up some other methods of removal here -
http://www.troublefixers.com/uninstall-remove-windows-xp-service-pack-3-working-procedure/
however,they werent very helpful either.
Could you suggest how to fix this problem being faced in installing Database XE.
Thanks and Regards,
Priya JetleyHi,
I couldn't locate a chkportdll2 file either on my system.It's no regular dll you have on your system. It's usually unpacked in your temp directory when you execute the installer. The message you receive indicates that the installer either couldn't unpack properly (e.g. lack of free space), but this usually would have resulted in an error message. Or you have some Antivirus solution that treats that dll as malware (well, portscans can be bad) and has moved the file into a quarantine zone or at least blocked the access.
Another option would be your user lacks execution privileges for network operations.
The installer fails at the step when you specify a location to install the database.This could mean you don't have enough free (temp) space. How much space is left on the drive that hosts your temp folder?
-Udo -
Hi all,
I'm working with a 10.2.0.4 Oracle Enterprise version. I'm trying to make a duplicate of my database from production to our new pre server. I'm having problems. We're not working with RMAN catalog.
When I try to duplicate the database using our diary full backup from pro, appears this error for all datafiles:
RMAN-06023: no backup or copy of datafile 1 found to restore
If I make a crosscheck backup on pro, all full backups are availables. The destiny instance is started as "no mount".
This is the rman block I use to do the duplicate (I'm doing it from pro server):
RMAN> CONNECT AUXILIARY sys/xxxxxx@PREDB
connected to auxiliary database: PREDB(not mounted)
RMAN> run{
2> ALLOCATE AUXILIARY CHANNEL aux1 DEVICE TYPE DISK;
3> DUPLICATE TARGET DATABASE TO SSINTTST
4> DB_FILE_NAME_CONVERT=('/oracle/oradata/DB','/oracle/oradata/u02/PREDB')
5> LOGFILE
6> GROUP 1 ('/oracle/oradata/u02/PREDB/redo01.log') SIZE 100M,
7> GROUP 2 ('/oracle/oradata/u02/PREDB/redo02.log') SIZE 100M,
8> GROUP 3 ('/oracle/oradata/u02/PREDB/redo03.log') SIZE 100M REUSE;
9> }
And the full result of it is:
using target database control file instead of recovery catalog
allocated channel: aux1
channel aux1: sid=159 devtype=DISK
Starting Duplicate Db at 26-SEP-11
contents of Memory Script:
set until scn 13359029805;
set newname for datafile 1 to
"/oracle/oradata/u02/PREDB/system01.dbf";
restore
check readonly
clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
Starting restore at 26-SEP-11
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to /oracle/oradata/u02/PREDB/system01.dbf (for each datafile)
channel aux1: reading from backup piece /oracle/backup/DB/backup_DB_20110926_2vmnhi1u_s7263_p1
ORA-19870: error reading backup piece /oracle/backup/DB/backup_DB_20110926_2vmnhi1u_s7263_p1
ORA-19505: failed to identify file "/oracle/backup/DB/backup_DB_20110926_2vmnhi1u_s7263_p1"
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
failover to previous backup
released channel: aux1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/26/2011 18:52:15
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 20 found to restore (for each datafile)
Any suggestions??
Regards,
dbajugLinux Error: 2: No such file or directoryCross-Check the crossponding directory structure that you have created and also the permission on the directory as specified in rman clock .
--neeraj -
Error during IdM database creation on Oracle
Hi,
We sometimes encounter the following error when creationg IDM database on Oracle (mxmc-install.sh) :
*** Updates installed
*** Creating language generation procedures
mxp_init_ids_onelang
mxp_init_ids_lang
Warning: Procedure created with compilation errors.
*** Creating procedures
mc_schemaversion
mc_version
mxpv_job_tasklink
And then we have errors on other procedures and initial load of the database :
mxp_init_ids
Warning: Procedure created with compilation errors.
mc_reset_ids
Warning: Procedure created with compilation errors.
mxp_init_all_ids
Warning: Procedure created with compilation errors.
mxp_Xcreate_ids
Warning: Procedure created with compilation errors.
mxp_create_ids
Warning: Procedure created with compilation errors.
BEGIN mxp_init_all_ids(:vStatus,:vStatusText); END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00905: object IP3_OPER.MXP_INIT_ALL_IDS is invalid
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
BEGIN mxp_create_ids(:IsId,:Status,:StatusText); END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00905: object IP3_OPER.MXP_CREATE_IDS is invalid
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
During first installation of IDM database there was no problem. So it seems it's a environnement parameter or Oracle parameter issue. Has anyone encountered the same problem ?
We were told there were no changes either on Oracle or on the system. But there must have been a change somehow impacting the language.
Do you have any idea on the Oracle parameters that could be involved ?
Thanks in advance,
Regards,
Herve.Hi,
I was facing the same problem and it was not possible to create an identity store.
The solution for me was increasing the oracle sga_max_size and shared_pool_size parameters.
They had the initial value fom installation of AS Java and setting shared_pool_size to 400MB fixed the procedure compilation problem.
After that I rerun the mxmc-update.cmd script and no more errors show up.
Creating idenitiy stores also works now.
Regards...Philipp -
How to determine different errors during update database with JDBC 2.0
During updating my database (MS Access 2000) using JDBC 2.0, I entered a value for the primary key field which has existed
in the database. However, when executing the method "udpateRow()" it gives me an error message "Error in row" and the
database was not updated.
When I update an Integer field with a non-integer value (e.g: Characters ), it also gives me the same error message. When I
update a Date field with a non-date value, it still displays the same error message.
How can I determine for each of the cases from the SQLException thrown that the actual error has occurred since I want to
display a different customized message indicating the different errors that occurred during updating??
Currently, part of my code is as follows:
int currentRow = rs.getRow();
String values[] = new String[ rsmd.getColumnCount() ];
// Initialize values[] begins here:
for( int count = 1; count <= rsmd.getColumnCount(); count++ ) {
rs.updateObject( count, values[ count - 1 ] );
try{
rs.updateRow();
catch( SQLException e ) {
System.out.println( e.getMessage() );
rs.cancelRowUpdates();
rs.absolute( currentRow );
Can someone please help me solve this problem?? THANKS.. :)Rather than attempting to figure out which column value causes the update to fail, I would try validating the input data before you attempt to use it in a SQL update. Of course, this would only be useful if you know what data types the inputs are supposed to be in advance of running the update.
William -
Error during create database connection (JDeveloper)
Hello!
Have you any suggestions of this: When I try to create new database connection to 9i DBMS, I've got errors:
ORA-00604: error with recursive SQL
ORA-12705: Invalid or unknown NLS parameter value specified.
At the same time I try to do the same with another one DBMS,
10g, and everything is Ok.
Thanks.
Andrew.Stephen, sure, I did all actions you described, during "Create new Database Connection":
(filling in driver (thin), host name (i.e. localhost), jdbc port (i.e. 1521), and sid (i.e. orcl) )
Th result I think should be looks like
jdbc:oracle:thin:@wizard.shots.ru:1522:VIVD
(tns for that DBMS is
VIVD.WORLD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = wizard.shots.ru)(PORT = 1522))
(CONNECT_DATA = (SID = VIVD))
As I wrote, the same actions give OK result, if dbms = 10g.
But, I want to test OEBS adapter, and OEBS stands on 9i DBMS only,
so I need to work with 9i
Thanks.
Andrew. -
Hello everyone!
First of all, i'm sorry for posting another restore problem, but i read all threads related and i still have my problem.
I have a fresh new install of oracleXE, but when i try to restore de database from a backup store in other disk install in the same computer, using the restore database option include with the application, the program show me these steps:
STEP 1:
This operation will shut down and restore the database. Are you sure [Y/N]?
I write 'Y'.
STEP 2:
This operation will shut down and restore the database. Are you sure [Y/N]?y
Restore in progress...
El servicio solicitado ya ha sido iniciado.
Puede obtener más ayuda con el comando NET HELPMSG 2182.
Recovery Manager : Release 10.2.0.1.0 - Production on Vie Ago 31 10:20:45 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
conectado a la base de datos destino: XE (DBID=2513092923)
RMAN> set echo on;
2> startup nomount pfile=C:\DOCUME~1\imgltda\CONFIG~1\Temp\rman_dummy.ora force;
3>
echo activado
instancia Oracle iniciada
Total del ┴rea Global del Sistema 285212672 bytes
Fixed Size 1287016 bytes
Variable Size 92277912 bytes
Database Buffers 188743680 bytes
Redo Buffers 2904064 bytes
Recovery Manager terminado.
Enter the flash recovery area location:
I write this in my flash recovery area, where i have the backup files: D:\Respaldo.
In this path i have de following folders: D:\Respaldo\XE; Inside this folder i have other folders: ARCHIVELOG, AUTOBACKUP, BACKUPSET, ONLINELOG.
STEP 3 This is my problem:
MAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: fallo del comando startup en 08/31/2007 10:24:10
RMAN-04014: fallo al iniciar: ORA-01261: Parameter db_recovery_file_dest destina
tion string cannot be translated
ORA-01263: Name given for file destination directory is invalid
OSD-04018: No se ha podido acceder al directorio o dispositivo especificado.
O/S-Error: (OS 21) El dispositivo no est┐ listo.
Recovery Manager terminado.
==================== ERROR =============================
Restore of the database failed.
RMAN Error - See log for error .
Log file is at C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\OX
E_RESTORE.LOG.
==================== ERROR =============================
Presione una tecla para continuar . . .
The OXE_RESTORE file show me this:
Recovery Manager : Release 10.2.0.1.0 - Production on Vie Ago 31 10:23:58 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Windows XP Version V5.1 Service Pack 2
CPU : 2 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:1652M/2021M, Ph+PgF:3435M/3914M, VA:2003M/2047M
Starting with debugging turned off
conectado a la base de datos destino: xe (no montada)
RMAN> set echo on;
2> restore (spfile from autobackup db_recovery_file_dest='D:\Respaldo');
3> startup nomount force;
4> restore (controlfile from autobackup);
5> alter database mount;
6> configure controlfile autobackup off;
7> restore database;
8>
echo activado
Iniciando restore en 31/08/07
se utiliza el archivo de control de la base de datos destino en lugar del catálogo de recuperación
canal asignado: ORA_DISK_1
canal ORA_DISK_1: sid=37 devtype=DISK
destino del área de recuperación: D:\Respaldo
nombre de base de datos (o nombre único de base de datos) utilizado para la búsqueda: XE
canal ORA_DISK_1: se ha encontrado una copia de seguridad automática en el área de recuperación
canal ORA_DISK_1: se ha encontrado la copia de seguridad automática: D:\RESPALDO\XE\AUTOBACKUP\2007_08_27\O1_MF_S_631711029_3F5TQOVT_.BKP
canal ORA_DISK_1: restauración de SPFILE a partir de la copia de seguridad automática terminada
restore terminado en 31/08/07
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: fallo del comando startup en 08/31/2007 10:24:10
RMAN-04014: fallo al iniciar: ORA-01261: Parameter db_recovery_file_dest destination string cannot be translated
ORA-01263: Name given for file destination directory is invalid
OSD-04018: No se ha podido acceder al directorio o dispositivo especificado.
O/S-Error: (OS 21) El dispositivo no est¿ listo.
Recovery Manager terminado.
I really do not know what is my problem and how to solve it. I hope you guys can help me. I'm under a big pressure to solve this soon.
My Operating System is: WinXP Pro
I'm using APEX 2.01
When I create the backup I use ARCHIVELOG enable
Things i try:
1. Install fresh oracle XE database, and restore
2. Install fresh oracle XE database, enable archivelog and restore
3. Install fresh oracle XE database, enable archivelog, change path of DB_RECOVERY_FILE_DEST to 'D:\Respaldo'.
4. Install fresh oracle XE database, enable archivelog, change path of DB_RECOVERY_FILE_DEST to 'D:\Respaldo', and execute: @?/sqlplus/admin/movelogs;
5. Install fresh oracle XE database, enable archivelog, change path of DB_RECOVERY_FILE_DEST to 'D:\Respaldo';, and change DB_RECOVERY_FILE_DEST_SIZE to 20G;
NOTE: sorry for my english it is not my native language. and sorry for using a spanish version of the database.
Message was edited by:
MinningWell,
After a lot of reading, i try this using rman:
SQL
1. SQL> connect xx/xx as sysdba
2. SQL> shutdown immediate
RMAN
1. RMAN> connect target XE
2. RMAN> startup nomount;
3. RMAN> restore spfile to 'C:\xe.ora' from 'D:\Respaldo\XE\AUTOBACKUP\2007_08_27\O
1_MF_S_631711029_3F5TQOVT_.BKP';
4. RMAN> alter database mount;
5. RMAN> restore database;
in point n°5 i have the following problem:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: fallo del comando restore en 09/06/2007 16:27:09
RMAN-06026: no se han encontrado algunos destinos - abortando la restauraci¾n
RMAN-06023: no se ha encontrado ninguna copia de seguridad o copia del archivo d
e datos 4 para restaurar
RMAN-06023: no se ha encontrado ninguna copia de seguridad o copia del archivo d
e datos 3 para restaurar
RMAN-06023: no se ha encontrado ninguna copia de seguridad o copia del archivo d
e datos 2 para restaurar
RMAN-06023: no se ha encontrado ninguna copia de seguridad o copia del archivo d
e datos 1 para restaurar
I try this command to find what's going on:
RMAN> list backup;
with this result:
Lista de Juegos de Copias de Seguridad
===================
Clave BS Tipo LV Tama±o Tipo de Dispositivo Tiempo Transcurrido Hora de F
inalizaci¾n
15 Full 736.04M DISK 00:00:19 24/08/07
Clave BP: 15 Estado: EXPIRED Comprimido: NO Etiqueta: TAG20070824T12
4938
Nombre de Parte: E:\RESPALDO\XE\BACKUPSET\2007_08_24\O1_MF_NNNDF_TAG2007
0824T124938_3DY3143F_.BKP
Lista de Archivos de Datos en el juego de copias de seguridad 15
Tipo de Archivo LV SCN Pto. Ctrl. Hora de Punto de Control Nombre
1 Full 2747434 24/08/07 C:\ORACLEXE\ORADATA\XE\SYSTEM
.DBF
2 Full 2747434 24/08/07 C:\ORACLEXE\ORADATA\XE\UNDO.D
BF
3 Full 2747434 24/08/07 C:\ORACLEXE\ORADATA\XE\SYSAUX
.DBF
4 Full 2747434 24/08/07 C:\ORACLEXE\ORADATA\XE\USERS.
DBF
Clave BS Tipo LV Tama±o Tipo de Dispositivo Tiempo Transcurrido Hora de F
inalizaci¾n
16 Full 6.83M DISK 00:00:01 24/08/07
Clave BP: 16 Estado: EXPIRED Comprimido: NO Etiqueta: TAG20070824T12
5005
Nombre de Parte: E:\RESPALDO\XE\AUTOBACKUP\2007_08_24\O1_MF_S_631457405_
3DY31Y0H_.BKP
Archivo de Control Incluido: SCN de Punto de Control: 2747446 Hora de Pun
to de Control: 24/08/07
SPFILE Incluido: Hora de Modificaci¾n: 24/08/07
Clave BS Tipo LV Tama±o Tipo de Dispositivo Tiempo Transcurrido Hora de F
inalizaci¾n
17 Full 736.04M DISK 00:00:20 24/08/07
Clave BP: 17 Estado: EXPIRED Comprimido: NO Etiqueta: TAG20070824T17
0028
Nombre de Parte: E:\RESPALDO\XE\BACKUPSET\2007_08_24\O1_MF_NNNDF_TAG2007
0824T170028_3DYKQGTC_.BKP
Lista de Archivos de Datos en el juego de copias de seguridad 17
Tipo de Archivo LV SCN Pto. Ctrl. Hora de Punto de Control Nombre
1 Full 2773728 24/08/07 C:\ORACLEXE\ORADATA\XE\SYSTEM
.DBF
2 Full 2773728 24/08/07 C:\ORACLEXE\ORADATA\XE\UNDO.D
BF
3 Full 2773728 24/08/07 C:\ORACLEXE\ORADATA\XE\SYSAUX
.DBF
4 Full 2773728 24/08/07 C:\ORACLEXE\ORADATA\XE\USERS.
DBF
Clave BS Tipo LV Tama±o Tipo de Dispositivo Tiempo Transcurrido Hora de F
inalizaci¾n
18 Full 6.83M DISK 00:00:02 24/08/07
Clave BP: 18 Estado: EXPIRED Comprimido: NO Etiqueta: TAG20070824T17
0054
Nombre de Parte: E:\RESPALDO\XE\AUTOBACKUP\2007_08_24\O1_MF_S_631472454_
3DYKR7OZ_.BKP
Archivo de Control Incluido: SCN de Punto de Control: 2773741 Hora de Pun
to de Control: 24/08/07
SPFILE Incluido: Hora de Modificaci¾n: 24/08/07
Clave BS Tipo LV Tama±o Tipo de Dispositivo Tiempo Transcurrido Hora de F
inalizaci¾n
19 Full 740.95M DISK 00:00:20 27/08/07
Clave BP: 19 Estado: EXPIRED Comprimido: NO Etiqueta: TAG20070827T11
1642
Nombre de Parte: E:\RESPALDO\XE\BACKUPSET\2007_08_27\O1_MF_NNNDF_TAG2007
0827T111642_3F5TPWHN_.BKP
Lista de Archivos de Datos en el juego de copias de seguridad 19
Tipo de Archivo LV SCN Pto. Ctrl. Hora de Punto de Control Nombre
1 Full 2916556 27/08/07 C:\ORACLEXE\ORADATA\XE\SYSTEM
.DBF
2 Full 2916556 27/08/07 C:\ORACLEXE\ORADATA\XE\UNDO.D
BF
3 Full 2916556 27/08/07 C:\ORACLEXE\ORADATA\XE\SYSAUX
.DBF
4 Full 2916556 27/08/07 C:\ORACLEXE\ORADATA\XE\USERS.
DBF
Where it says 'Estado' (Status in english) I found this: 'EXPIRED', it seems that my 4 dbf files have some problem, right now i'm looking for a way to solve this, but with no luck.
I think i need a little help again... -
CCA install error during init database (@UseMe.sql)
when I init the oracle database use @UseMe.sql
It give following errors.
how to fix it?
25907 [main] INFO $Revision: 3 $ - Node list size [1]
25922 [main] INFO $Revision: 222 $ - Inserting the following language => italian
25938 [main] INFO $Revision: 3 $ - Node list size [1]
25985 [main] INFO $Revision: 222 $ - Inserting the following language => chinese
26032 [main] ERROR $Revision: 3 $ - Cannot parse the com/taw/data/chinese/localelanguages.xml file, something wrong in the xml, leaving
org.xml.sax.SAXParseException: Document root element is missing
at org.apache.crimson.parser.Parser2.fatal(Unknown Source)
at org.apache.crimson.parser.Parser2.fatal(Unknown Source)
at org.apache.crimson.parser.Parser2.parseInternal(Unknown Source)
at org.apache.crimson.parser.Parser2.parse(Unknown Source)
at org.apache.crimson.parser.XMLReaderImpl.parse(Unknown Source)
at org.apache.crimson.jaxp.DocumentBuilderImpl.parse(Unknown Source)
at javax.xml.parsers.DocumentBuilder.parse(Unknown Source)
at com.taw.util.tawUtil.getNodeList(tawUtil.java:26)
at com.taw.work.LoadData.getNodeList(LoadData.java:1892)
at com.taw.work.LoadData.processLanguages(LoadData.java:2684)
at com.taw.work.LoadData.processSiebelLanguages(LoadData.java:1824)
at com.taw.work.LoadData.processSystemData(LoadData.java:1874)
at com.taw.work.LoadData.initVersionVariable(LoadData.java:297)
at com.taw.work.LoadData.testDatabaseConnection(LoadData.java:220)
at com.taw.work.LoadData.main(LoadData.java:2826)
Exception in thread "main" org.xml.sax.SAXParseException: ????????
at org.apache.crimson.parser.Parser2.fatal(Unknown Source)
at org.apache.crimson.parser.Parser2.fatal(Unknown Source)
at org.apache.crimson.parser.Parser2.parseInternal(Unknown Source)
at org.apache.crimson.parser.Parser2.parse(Unknown Source)
at org.apache.crimson.parser.XMLReaderImpl.parse(Unknown Source)
at org.apache.crimson.jaxp.DocumentBuilderImpl.parse(Unknown Source)
at javax.xml.parsers.DocumentBuilder.parse(Unknown Source)
at com.taw.util.tawUtil.getNodeList(tawUtil.java:26)
at com.taw.work.LoadData.getNodeList(LoadData.java:1892)
at com.taw.work.LoadData.processLanguages(LoadData.java:2684)
at com.taw.work.LoadData.processSiebelLanguages(LoadData.java:1824)
at com.taw.work.LoadData.processSystemData(LoadData.java:1874)
at com.taw.work.LoadData.initVersionVariable(LoadData.java:297)
at com.taw.work.LoadData.testDatabaseConnection(LoadData.java:220)
at com.taw.work.LoadData.main(LoadData.java:2826)
Edited by: tigger on Mar 5, 2009 5:16 AMupgrade to jdk 1.5 fixed
-
Dbowner.sql error during PS database installation
Hello,
I am trying to run dbowner.sql. I have logged into SQLPlus as sysdba.
I am getting the following error and was wondering if it was an issue? I have been able to verify that the PSDBOWNER table was created even though it is empty at this point. The spool off command is run.
SQL> CONNECT SYSTEM/MANAGER;
ERROR:
ORA-01017: invalid username/password; logon denied
Warning: You are no longer connected to Oracle
SQL: REVOKE CONNECT, RESOURCE, DBA FROM PS;
SP2-0640: Not connected
SQL>
SQL>spool off
Many thanks.user10567162 wrote:
SQL> CONNECT SYSTEM/MANAGER; The SYSTEM account password is maybe not MANAGER onto your database. Modify the script according to your own SYSTEMS's password.
Nicolas. -
Backup location during duplicate database
On my production backup is taken in the path /u01/backup.
I have copied the backup pieces to the location /u07/backup on the Auxiliary system.
But how can i tell RMAN to look for the backups in the new location.
I cant change the location of production using catalog command.
ie.., /u07 is not available on PROD and /u01 is not available on dev.
I want only the duplicate command to read the file from /u07/backup pathHi,
You could make a link on the Auxiliary system (provided /u01/backup does not exists as a true directory).
If it not already exists create a directory /u01 with the right owner and group.
Than as the oracle user < ln -s /u07/backup /u01/backup >.
Regards,
Tycho
Maybe you are looking for
-
Deserialization Error while connecting to web service
I am getting a deserialization error while connecting to a web service. Deserializing parameter 'ScheduleReceiveService': could not find deserializer for type {http://www.w3.org/2001/XMLSchema}anyType... There are two methods ex UserDefinedClass1 met
-
I've now got a weird problem with the 2.0 firmware; The mail in my inbox now only shows the most recent message, no matter how many are in there or how many are new. This is frustrating as I constantly have the new message number on the mail icon, wi
-
Satellite P30: Cannot get picture on TV
I have a Sat P30 and would like to view on TV rather than lcd screen for dvd viewing etc. I have connected via 4pin s-video - 4pin s-video into scart socket (as tv doesn't have s video connection) and connected sound into scart as well (scart has svi
-
Is this mail a spam???????????
I had this email which i dont trust. Is it fake? ADOBE READER 2011 SOFTWARE UPGRADE NOTIFICATION This is to remind that a new version of Adobe Acrobat Reader 2011 with enhanced features for viewing, creating, editing, printing and internet-sharing PD
-
How to update usb driver...
I've got a MS-6390 and am running Window 2000 Pro. I am trying to get my digital camera to connect, and their support tells me I need to update my usb drivers. My multiple attempts all end in miserable failure as far as I can tell. I'm checking in t