Errors during duplicating database.

Hello,
I'm duplicating my database (using RMAN) and I get the following error:
contents of Memory Script:
shutdown clone;
startup clone nomount;
executing Memory Script
database dismounted
Oracle instance shut down
RMAN-00571(...)
RMAN-04006:error from auxiliary database: ORA-12514: TNS: listener doesn not currently know of service requested in connect descriptor.
It's 10.2 database on Linux. Auxiliary database is named 'aux'
Tnsnames.ora and listener.ora seems to be ok, since I could connect to this instance (while it was in nomount state, before duplicating in RMAN) using
sqlplus sys/***@aux as sysdba
After I got the error I connected to aux using Bequeath, and checked it's status. It is shutdown since I got the error:
ORA-01034: ORACLE not available.
What can I do?
Thx. in advance
Aliq.

On 9i, Oracle registers itself with the database when the database is opened.
This means in any other state you need to use SID= in your tnsnames.ora.
From your post it looks like this still applies to 10g.
I would try changing my tnsnames.ora.
You could of course, immediately after receiving the error, run lsnrctl services and check whether the service_name of the aux database is listed.
Sybrand Bakker
Senior Oracle DBA

Similar Messages

Control file failed error while duplicating database using RMAN

I am using oracle database 10g R2 and trying to make a clone of the source database orcl on the same machine but with different directory structure with the name of test.
When i run the duplicate command to create test database, then following error is generted:
D:\>rman target sys@orcl nocatalog auxiliary /
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Nov 11 12:13:26 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
target database Password:
connected to target database: ORCL (DBID=1264668332)
using target database control file instead of recovery catalog
connected to auxiliary database: TEST (not mounted)
RMAN> @script.txt
RMAN> Run {
2> Allocate channel C1 type disk;
3> allocate auxiliary channel 'adisk_0' type DISK;
4> duplicate target database to "test";
5> #BACKUP INCREMENTAL LEVEL 1 DATABASE;
6> #BACKUP INCREMENTAL LEVEL 1 CUMULATIVE DATABASE;
7> #BACKUP INCREMENTAL LEVEL 0 DATABASE;
8> #delete obsolete;
9> }
allocated channel: C1
channel C1: sid=140 devtype=DISK
allocated channel: adisk_0
channel adisk_0: sid=157 devtype=DISK
Starting Duplicate Db at 11-NOV-11
contents of Memory Script:
   set until scn 12926250;
   set newname for datafile 1 to
"D:\TEST\ORADATA\SYSTEM01.DBF";
   set newname for datafile 2 to
"D:\TEST\ORADATA\UNDOTBS01.DBF";
   set newname for datafile 3 to
"D:\TEST\ORADATA\SYSAUX01.DBF";
   set newname for datafile 4 to
"D:\TEST\ORADATA\USERS01.DBF";
   set newname for datafile 5 to
"D:\TEST\ORADATA\EXAMPLE01.DBF";
   set newname for datafile 6 to
"D:\TEST\ORADATA\GL.DBF";
   restore
   check readonly
   clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 11-NOV-11
channel adisk_0: starting datafile backupset restore
channel adisk_0: specifying datafile(s) to restore from backup set
restoring datafile 00001 to D:\TEST\ORADATA\SYSTEM01.DBF
restoring datafile 00002 to D:\TEST\ORADATA\UNDOTBS01.DBF
restoring datafile 00003 to D:\TEST\ORADATA\SYSAUX01.DBF
restoring datafile 00004 to D:\TEST\ORADATA\USERS01.DBF
restoring datafile 00005 to D:\TEST\ORADATA\EXAMPLE01.DBF
restoring datafile 00006 to D:\TEST\ORADATA\GL.DBF
channel adisk_0: reading from backup piece D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_07\O1_MF_NNND0_TAG20111107T220822_7CJ
P
channel adisk_0: restored backup piece 1
piece handle=D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_07\O1_MF_NNND0_TAG20111107T220822_7CJ44MH4_.BKP tag=TAG20111107T220
channel adisk_0: restore complete, elapsed time: 00:01:46
Finished restore at 11-NOV-11
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "TEST" RESETLOGS ARCHIVELOG
MAXLOGFILES     16
MAXLOGMEMBERS      3
MAXDATAFILES      100
MAXINSTANCES     8
MAXLOGHISTORY      292
LOGFILE
GROUP 1 ( 'D:\TEST\ORADATA\REDO01.LOG' ) SIZE 50 M REUSE,
GROUP 2 ( 'D:\TEST\ORADATA\REDO02.LOG' ) SIZE 50 M REUSE,
GROUP 3 ( 'D:\TEST\ORADATA\REDO03.LOG' ) SIZE 50 M REUSE
DATAFILE
'D:\TEST\ORADATA\SYSTEM01.DBF'
CHARACTER SET WE8MSWIN1252
contents of Memory Script:
   switch clone datafile all;
executing Memory Script
datafile 2 switched to datafile copy
input datafile copy recid=1 stamp=766930525 filename=D:\TEST\ORADATA\UNDOTBS01.DBF
datafile 3 switched to datafile copy
input datafile copy recid=2 stamp=766930525 filename=D:\TEST\ORADATA\SYSAUX01.DBF
datafile 4 switched to datafile copy
input datafile copy recid=3 stamp=766930526 filename=D:\TEST\ORADATA\USERS01.DBF
datafile 5 switched to datafile copy
input datafile copy recid=4 stamp=766930526 filename=D:\TEST\ORADATA\EXAMPLE01.DBF
datafile 6 switched to datafile copy
input datafile copy recid=5 stamp=766930526 filename=D:\TEST\ORADATA\GL.DBF
contents of Memory Script:
   set until scn 12926250;
   recover
   clone database
    delete archivelog
executing Memory Script
executing command: SET until clause
Starting recover at 11-NOV-11
channel adisk_0: starting incremental datafile backupset restore
channel adisk_0: specifying datafile(s) to restore from backup set
destination for restore of datafile 00001: D:\TEST\ORADATA\SYSTEM01.DBF
destination for restore of datafile 00002: D:\TEST\ORADATA\UNDOTBS01.DBF
destination for restore of datafile 00003: D:\TEST\ORADATA\SYSAUX01.DBF
destination for restore of datafile 00004: D:\TEST\ORADATA\USERS01.DBF
destination for restore of datafile 00005: D:\TEST\ORADATA\EXAMPLE01.DBF
destination for restore of datafile 00006: D:\TEST\ORADATA\GL.DBF
channel adisk_0: reading from backup piece D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_09\O1_MF_NNND1_TAG20111109T223628_7CO
P
channel adisk_0: restored backup piece 1
piece handle=D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_09\O1_MF_NNND1_TAG20111109T223628_7COGJZVT_.BKP tag=TAG20111109T223
channel adisk_0: restore complete, elapsed time: 00:00:07
channel adisk_0: starting incremental datafile backupset restore
channel adisk_0: specifying datafile(s) to restore from backup set
destination for restore of datafile 00001: D:\TEST\ORADATA\SYSTEM01.DBF
destination for restore of datafile 00002: D:\TEST\ORADATA\UNDOTBS01.DBF
destination for restore of datafile 00003: D:\TEST\ORADATA\SYSAUX01.DBF
destination for restore of datafile 00004: D:\TEST\ORADATA\USERS01.DBF
destination for restore of datafile 00005: D:\TEST\ORADATA\EXAMPLE01.DBF
destination for restore of datafile 00006: D:\TEST\ORADATA\GL.DBF
channel adisk_0: reading from backup piece D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_10\O1_MF_NNND1_TAG20111110T221428_7CR
P
channel adisk_0: restored backup piece 1
piece handle=D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_10\O1_MF_NNND1_TAG20111110T221428_7CR1MQFO_.BKP tag=TAG20111110T221
channel adisk_0: restore complete, elapsed time: 00:00:16
starting media recovery
archive log thread 1 sequence 524 is already on disk as file D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_11_11\O1_MF_1_524_7CS
C
archive log filename=D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_11_11\O1_MF_1_524_7CSG2HVT_.ARC thread=1 sequence=524
media recovery complete, elapsed time: 00:00:14
Finished recover at 11-NOV-11
contents of Memory Script:
   shutdown clone;
   startup clone nomount ;
executing Memory Script
database dismounted
Oracle instance shut down
connected to auxiliary database (not started)
Oracle instance started
Total System Global Area     230686720 bytes
Fixed Size                     1248236 bytes
Variable Size                 67109908 bytes
Database Buffers             155189248 bytes
Redo Buffers                   7139328 bytes
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "TEST" RESETLOGS ARCHIVELOG
MAXLOGFILES     16
MAXLOGMEMBERS      3
MAXDATAFILES      100
MAXINSTANCES     8
MAXLOGHISTORY      292
LOGFILE
GROUP 1 ( 'D:\TEST\ORADATA\REDO01.LOG' ) SIZE 50 M REUSE,
GROUP 2 ( 'D:\TEST\ORADATA\REDO02.LOG' ) SIZE 50 M REUSE,
GROUP 3 ( 'D:\TEST\ORADATA\REDO03.LOG' ) SIZE 50 M REUSE
DATAFILE
'D:\TEST\ORADATA\SYSTEM01.DBF'
CHARACTER SET WE8MSWIN1252
released channel: C1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 11/11/2011 12:16:21
RMAN-06136: ORACLE error from auxiliary database: ORA-01503: CREATE CONTROLFILE failed
ORA-01504: database name 'TEST' does not match parameter db_name 'orcl'
RMAN> **end-of-file**
Script.txt
Run {
Allocate channel C1 type disk;
allocate auxiliary channel 'adisk_0' type DISK;
duplicate target database to "test";
}Kindly help?

Moazzam wrote:
RMAN-06136: ORACLE error from auxiliary database: ORA-01503: CREATE CONTROLFILE failed
ORA-01504: database name 'TEST' does not match parameter db_name 'orcl'
Kindly help?>Please check what is the value of parameter db_name in the standby database? It should be match with TEST name
Cheers

Error during duplicate database.

Hi All,
db - 9.2.0.8.0
OS - Win 2003 server
I was rying to duplicate db on the same server. Please go through the following massage.
printing stored script: Memory Script
   set until scn 14420521;
   recover
   clone database
    delete archivelog
executing script: Memory Script
Note, at this point my database was apperead to hang for long time. it was around 2 hour and then revert back with the following
executing command: SET until clause
Starting recover at 18-SEP-08
starting media recovery
archive log thread 1 sequence 7 is already on disk as file D:\BCKUP\ARCHIVE\ARCH_7.ARC
archive log thread 1 sequence 8 is already on disk as file D:\BCKUP\ARCHIVE\ARCH_8.ARC
archive log thread 1 sequence 9 is already on disk as file D:\BCKUP\ARCHIVE\ARCH_9.ARC
archive log thread 1 sequence 10 is already on disk as file D:\BCKUP\ARCHIVE\ARCH_10.ARC
archive log thread 1 sequence 11 is already on disk as file D:\BCKUP\ARCHIVE\ARCH_11.ARC
archive log thread 1 sequence 12 is already on disk as file D:\BCKUP\ARCHIVE\ARCH_12.ARC
archive log filename=D:\BCKUP\ARCHIVE\ARCH_7.ARC thread=1 sequence=7
archive log filename=D:\BCKUP\ARCHIVE\ARCH_8.ARC thread=1 sequence=8
archive log filename=D:\BCKUP\ARCHIVE\ARCH_9.ARC thread=1 sequence=9
archive log filename=D:\BCKUP\ARCHIVE\ARCH_10.ARC thread=1 sequence=10
archive log filename=D:\BCKUP\ARCHIVE\ARCH_11.ARC thread=1 sequence=11
archive log filename=D:\BCKUP\ARCHIVE\ARCH_12.ARC thread=1 sequence=12
media recovery complete
Finished recover at 18-SEP-08
printing stored script: Memory Script
   shutdown clone;
   startup clone nomount ;
executing script: Memory Script
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/18/2008 20:11:45
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-01013: user requested cancel of current operation
hare krishna
Alok

Alok do you have user that still active at auxiliary instance ,exit from that auxilairy session after doing database in nomount and then retry the duplicate process.
Khurram

Control File error while duplicating Database through Rman

Hi,
Oracle Ver: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
Os:Win Xp
I am trying to create a Standby through Rman....
I am using this Run Block to take backup of Primary Database.......
run {
allocate channel d1 type disk;
allocate channel d2 type disk;
setlimit channel d1 kbytes 2097150;
setlimit channel d2 kbytes 2097150;
backup incremental level 0 format 'e:\Oracle\standby\rman\df_%U' database
include current controlfile for standby;
sql "alter system archive log current";
backup
archivelog all format 'e:\Oracle\standby\rman\al_%U' delete input;
}After taking the Backup when I am trying to create the standby with Duplicate command it s giving me Error...
The Run Block I am using is ......
RMAN> run {
2> allocate auxiliary channel dup1 type disk;
3> allocate auxiliary channel dup2 type disk;
4> set newname for datafile 1 to 'E:\Oracle\standby\system01.dbf';
5> set newname for datafile 2 to 'E:\Oracle\standby\UNDOTBS01.DBF';
6> set newname for datafile 3 to 'E:\Oracle\standby\SYSAUX01.DBF';
7> set newname for datafile 4 to 'E:\Oracle\standby\USERS01.DBF';
8> duplicate target database for standby
9> dorecover;
10> }
allocated channel: dup1
channel dup1: sid=37 devtype=DISK
allocated channel: dup2
channel dup2: sid=36 devtype=DISK
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting Duplicate Db at 02-OCT-08
contents of Memory Script:
   set until scn 1105194;
   restore clone standby controlfile;
   sql clone 'alter database mount standby database';
executing Memory Script
executing command: SET until clause
Starting restore at 02-OCT-08
channel dup1: starting datafile backupset restore
channel dup1: restoring control file
channel dup1: reading from backup piece E:\ORACLE\STANDBY\RMAN\DF_0VJS4RS7_1_1
channel dup1: restored backup piece 1
piece handle=E:\ORACLE\STANDBY\RMAN\DF_0VJS4RS7_1_1 tag=TAG20081002T124502
channel dup1: restore complete, elapsed time: 00:00:01
output filename=D:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\CTL1STANDBY.ORA
Finished restore at 02-OCT-08
sql statement: alter database mount standby database
released channel: dup1
released channel: dup2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/02/2008 13:01:43
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of sql command on clone_default channel at 10/02/2008 13:01:43
RMAN-11003: failure during parse/execution of SQL statement: alter database mount standby database
*ORA-00201: control file version 10.2.0.1.0 incompatible with ORACLE version 10.2.0.0.0*
ORA-00202: control file: 'D:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\CTL1STANDBY.ORA'Why i am getting this Incomaptable Control File error inspite of Backing up the control File.....
Regards,
Prosenjit Mukherjee

Check the value for the parameter "COMPATIBLE" in the source and standby database instance parameter files.
"COMPATIBLE" should be the same.
See http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/create_ps.htm#i70517
"... ensure the COMPATIBLE initialization parameter is set to the same value on both the primary and standby databases"
Edited by: Hemant K Chitale on Oct 2, 2008 4:09 PM
Added link and quote from 10g doc

Facing error during Oracle Database Express Edition Installation

Hi,
I'm trying to install Oracle database XE on my system (Windows XP Service Pack 3) and keep getting an error "failed to load dll chkportdl2"" while trying to do so.
While researching on a fix,I came across a solution that suggested uninstall of XP service pack 3 during installation and reinstall later.
Now,I dont see an option for "Windows XP Service Pack 3" in "Add/Remove Programs".
I believe Windows XP OBI comes up pre-loaded with Windows XP Service Pack 3 and am not sure if I can uninstall it.
I looked up some other methods of removal here -
http://www.troublefixers.com/uninstall-remove-windows-xp-service-pack-3-working-procedure/
however,they werent very helpful either.
Could you suggest how to fix this problem being faced in installing Database XE.
Thanks and Regards,
Priya Jetley

Hi,
I couldn't locate a chkportdll2 file either on my system.It's no regular dll you have on your system. It's usually unpacked in your temp directory when you execute the installer. The message you receive indicates that the installer either couldn't unpack properly (e.g. lack of free space), but this usually would have resulted in an error message. Or you have some Antivirus solution that treats that dll as malware (well, portscans can be bad) and has moved the file into a quarantine zone or at least blocked the access.
Another option would be your user lacks execution privileges for network operations.
The installer fails at the step when you specify a location to install the database.This could mean you don't have enough free (temp) space. How much space is left on the drive that hosts your temp folder?
-Udo

Error during IdM database creation on Oracle

Hi,
We sometimes encounter the following error when creationg IDM database on Oracle (mxmc-install.sh) :
*** Updates installed
*** Creating language generation procedures
mxp_init_ids_onelang
mxp_init_ids_lang
Warning: Procedure created with compilation errors.
*** Creating procedures
mc_schemaversion
mc_version
mxpv_job_tasklink
And then we have errors on other procedures and initial load of the database :
mxp_init_ids
Warning: Procedure created with compilation errors.
mc_reset_ids
Warning: Procedure created with compilation errors.
mxp_init_all_ids
Warning: Procedure created with compilation errors.
mxp_Xcreate_ids
Warning: Procedure created with compilation errors.
mxp_create_ids
Warning: Procedure created with compilation errors.
BEGIN mxp_init_all_ids(:vStatus,:vStatusText); END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00905: object IP3_OPER.MXP_INIT_ALL_IDS is invalid
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
BEGIN mxp_create_ids(:IsId,:Status,:StatusText); END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00905: object IP3_OPER.MXP_CREATE_IDS is invalid
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
During first installation of IDM database there was no problem. So it seems it's a environnement parameter or Oracle parameter issue. Has anyone encountered the same problem ?
We were told there were no changes either on Oracle or on the system. But there must have been a change somehow impacting the language.
Do you have any idea on the Oracle parameters that could be involved ?
Thanks in advance,
Regards,
Herve.

Hi,
I was facing the same problem and it was not possible to create an identity store.
The solution for me was increasing the oracle sga_max_size and shared_pool_size parameters.
They had the initial value fom installation of AS Java and setting shared_pool_size to 400MB fixed the procedure compilation problem.
After that I rerun the mxmc-update.cmd script and no more errors show up.
Creating idenitiy stores also works now.
Regards...Philipp

How to determine different errors during update database with JDBC 2.0

During updating my database (MS Access 2000) using JDBC 2.0, I entered a value for the primary key field which has existed
in the database. However, when executing the method "udpateRow()" it gives me an error message "Error in row" and the
database was not updated.
When I update an Integer field with a non-integer value (e.g: Characters ), it also gives me the same error message. When I
update a Date field with a non-date value, it still displays the same error message.
How can I determine for each of the cases from the SQLException thrown that the actual error has occurred since I want to
display a different customized message indicating the different errors that occurred during updating??
Currently, part of my code is as follows:
 int currentRow = rs.getRow();
 String values[] = new String[ rsmd.getColumnCount() ];
 // Initialize values[] begins here:
 for( int count = 1; count <= rsmd.getColumnCount(); count++ ) {
 rs.updateObject( count, values[ count - 1 ] );
 try{
 rs.updateRow();
 catch( SQLException e ) {
 System.out.println( e.getMessage() );
 rs.cancelRowUpdates();
 rs.absolute( currentRow );
Can someone please help me solve this problem?? THANKS.. :)

Rather than attempting to figure out which column value causes the update to fail, I would try validating the input data before you attempt to use it in a SQL update. Of course, this would only be useful if you know what data types the inputs are supposed to be in advance of running the update.
William

Error during create database connection (JDeveloper)

Hello!
Have you any suggestions of this: When I try to create new database connection to 9i DBMS, I've got errors:
ORA-00604: error with recursive SQL
ORA-12705: Invalid or unknown NLS parameter value specified.
At the same time I try to do the same with another one DBMS,
10g, and everything is Ok.
Thanks.
Andrew.

Stephen, sure, I did all actions you described, during "Create new Database Connection":
(filling in driver (thin), host name (i.e. localhost), jdbc port (i.e. 1521), and sid (i.e. orcl) )
Th result I think should be looks like
jdbc:oracle:thin:@wizard.shots.ru:1522:VIVD
(tns for that DBMS is
VIVD.WORLD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = wizard.shots.ru)(PORT = 1522))
(CONNECT_DATA = (SID = VIVD))
As I wrote, the same actions give OK result, if dbms = 10g.
But, I want to test OEBS adapter, and OEBS stands on 9i DBMS only,
so I need to work with 9i
Thanks.
Andrew.

Error while duplicating database for building dataguard(standby)

RMAN> duplicate target database for standby dorecover;
Starting Duplicate Db at 25-MAY-13
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=17 device type=DISK
contents of Memory Script:
set until scn 874292;
sql clone "alter system set control_files =
''/u01/app/oracle/oradata/STANDBY/controlfile/o1_mf_8sz086mc_.ctl'', ''/u01/app/oracle/flash_recovery_area/STANDBY/controlfile/o1_mf_8sz087vk_.ctl'' comment=
''Set by RMAN'' scope=spfile";
restore clone standby controlfile;
executing Memory Script
executing command: SET until clause
sql statement: alter system set control_files = ''/u01/app/oracle/oradata/STANDBY/controlfile/o1_mf_8sz086mc_.ctl'', ''/u01/app/oracle/flash_recovery_area/STANDBY/controlfile/o1_mf_8sz087vk_.ctl'' comment= ''Set by RMAN'' scope=spfile
Starting restore at 25-MAY-13
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /u01/PRBACKUP/0doahj1f_1_1
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /u01/PRBACKUP/0doahj1f_1_1
ORA-19505: failed to identify file "/u01/PRBACKUP/0doahj1f_1_1"
ORA-27041: unable to open file
Linux Error: 13: Permission denied
Additional information: 9
failover to previous backup
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /u01/PRBACKUP/0aoaeo7l_1_1
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /u01/PRBACKUP/0aoaeo7l_1_1
ORA-19505: failed to identify file "/u01/PRBACKUP/0aoaeo7l_1_1"
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /u01/PRBACKUP/08oaeo63_1_1
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /u01/PRBACKUP/08oaeo63_1_1
ORA-19505: failed to identify file "/u01/PRBACKUP/08oaeo63_1_1"
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/25/2013 17:13:24
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
can anybody tell me what should I do....

Hello;
Kind of hard without seeing everything but based on this :
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /u01/PRBACKUP/0doahj1f_1_1
ORA-19505: failed to identify file "/u01/PRBACKUP/0doahj1f_1_1"
ORA-27041: unable to open file
Linux Error: 13: Permission deniedIf appears you have an OS permission on "/u01/PRBACKUP/" or the file is just missing.
If it helps here are my notes on this :
http://www.visi.com/~mseberg/duprman.html
http://www.visi.com/~mseberg/duprman2.html
Best Regards
mseberg

Error during Restore Database

Hello everyone!
First of all, i'm sorry for posting another restore problem, but i read all threads related and i still have my problem.
I have a fresh new install of oracleXE, but when i try to restore de database from a backup store in other disk install in the same computer, using the restore database option include with the application, the program show me these steps:
STEP 1:
This operation will shut down and restore the database. Are you sure [Y/N]?
I write 'Y'.
STEP 2:
This operation will shut down and restore the database. Are you sure [Y/N]?y
Restore in progress...
El servicio solicitado ya ha sido iniciado.
Puede obtener más ayuda con el comando NET HELPMSG 2182.
Recovery Manager : Release 10.2.0.1.0 - Production on Vie Ago 31 10:20:45 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
conectado a la base de datos destino: XE (DBID=2513092923)
RMAN> set echo on;
2> startup nomount pfile=C:\DOCUME~1\imgltda\CONFIG~1\Temp\rman_dummy.ora force;
3>
echo activado
instancia Oracle iniciada
Total del ┴rea Global del Sistema 285212672 bytes
Fixed Size 1287016 bytes
Variable Size 92277912 bytes
Database Buffers 188743680 bytes
Redo Buffers 2904064 bytes
Recovery Manager terminado.
Enter the flash recovery area location:
I write this in my flash recovery area, where i have the backup files: D:\Respaldo.
In this path i have de following folders: D:\Respaldo\XE; Inside this folder i have other folders: ARCHIVELOG, AUTOBACKUP, BACKUPSET, ONLINELOG.
STEP 3 This is my problem:
MAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: fallo del comando startup en 08/31/2007 10:24:10
RMAN-04014: fallo al iniciar: ORA-01261: Parameter db_recovery_file_dest destina
tion string cannot be translated
ORA-01263: Name given for file destination directory is invalid
OSD-04018: No se ha podido acceder al directorio o dispositivo especificado.
O/S-Error: (OS 21) El dispositivo no est┐ listo.
Recovery Manager terminado.
==================== ERROR =============================
Restore of the database failed.
RMAN Error - See log for error .
Log file is at C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\OX
E_RESTORE.LOG.
==================== ERROR =============================
Presione una tecla para continuar . . .
The OXE_RESTORE file show me this:
Recovery Manager : Release 10.2.0.1.0 - Production on Vie Ago 31 10:23:58 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Windows XP Version V5.1 Service Pack 2
CPU : 2 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:1652M/2021M, Ph+PgF:3435M/3914M, VA:2003M/2047M
Starting with debugging turned off
conectado a la base de datos destino: xe (no montada)
RMAN> set echo on;
2> restore (spfile from autobackup db_recovery_file_dest='D:\Respaldo');
3> startup nomount force;
4> restore (controlfile from autobackup);
5> alter database mount;
6> configure controlfile autobackup off;
7> restore database;
8>
echo activado
Iniciando restore en 31/08/07
se utiliza el archivo de control de la base de datos destino en lugar del catálogo de recuperación
canal asignado: ORA_DISK_1
canal ORA_DISK_1: sid=37 devtype=DISK
destino del área de recuperación: D:\Respaldo
nombre de base de datos (o nombre único de base de datos) utilizado para la búsqueda: XE
canal ORA_DISK_1: se ha encontrado una copia de seguridad automática en el área de recuperación
canal ORA_DISK_1: se ha encontrado la copia de seguridad automática: D:\RESPALDO\XE\AUTOBACKUP\2007_08_27\O1_MF_S_631711029_3F5TQOVT_.BKP
canal ORA_DISK_1: restauración de SPFILE a partir de la copia de seguridad automática terminada
restore terminado en 31/08/07
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: fallo del comando startup en 08/31/2007 10:24:10
RMAN-04014: fallo al iniciar: ORA-01261: Parameter db_recovery_file_dest destination string cannot be translated
ORA-01263: Name given for file destination directory is invalid
OSD-04018: No se ha podido acceder al directorio o dispositivo especificado.
O/S-Error: (OS 21) El dispositivo no est¿ listo.
Recovery Manager terminado.
I really do not know what is my problem and how to solve it. I hope you guys can help me. I'm under a big pressure to solve this soon.
My Operating System is: WinXP Pro
I'm using APEX 2.01
When I create the backup I use ARCHIVELOG enable
Things i try:
1. Install fresh oracle XE database, and restore
2. Install fresh oracle XE database, enable archivelog and restore
3. Install fresh oracle XE database, enable archivelog, change path of DB_RECOVERY_FILE_DEST to 'D:\Respaldo'.
4. Install fresh oracle XE database, enable archivelog, change path of DB_RECOVERY_FILE_DEST to 'D:\Respaldo', and execute: @?/sqlplus/admin/movelogs;
5. Install fresh oracle XE database, enable archivelog, change path of DB_RECOVERY_FILE_DEST to 'D:\Respaldo';, and change DB_RECOVERY_FILE_DEST_SIZE to 20G;
NOTE: sorry for my english it is not my native language. and sorry for using a spanish version of the database.
Message was edited by:
Minning

Well,
After a lot of reading, i try this using rman:
SQL
1. SQL> connect xx/xx as sysdba
2. SQL> shutdown immediate
RMAN
1. RMAN> connect target XE
2. RMAN> startup nomount;
3. RMAN> restore spfile to 'C:\xe.ora' from 'D:\Respaldo\XE\AUTOBACKUP\2007_08_27\O
1_MF_S_631711029_3F5TQOVT_.BKP';
4. RMAN> alter database mount;
5. RMAN> restore database;
in point n°5 i have the following problem:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: fallo del comando restore en 09/06/2007 16:27:09
RMAN-06026: no se han encontrado algunos destinos - abortando la restauraci¾n
RMAN-06023: no se ha encontrado ninguna copia de seguridad o copia del archivo d
e datos 4 para restaurar
RMAN-06023: no se ha encontrado ninguna copia de seguridad o copia del archivo d
e datos 3 para restaurar
RMAN-06023: no se ha encontrado ninguna copia de seguridad o copia del archivo d
e datos 2 para restaurar
RMAN-06023: no se ha encontrado ninguna copia de seguridad o copia del archivo d
e datos 1 para restaurar
I try this command to find what's going on:
RMAN> list backup;
with this result:
Lista de Juegos de Copias de Seguridad
===================
Clave BS Tipo LV Tama±o Tipo de Dispositivo Tiempo Transcurrido Hora de F
inalizaci¾n
15 Full 736.04M DISK 00:00:19 24/08/07
Clave BP: 15 Estado: EXPIRED Comprimido: NO Etiqueta: TAG20070824T12
4938
Nombre de Parte: E:\RESPALDO\XE\BACKUPSET\2007_08_24\O1_MF_NNNDF_TAG2007
0824T124938_3DY3143F_.BKP
Lista de Archivos de Datos en el juego de copias de seguridad 15
Tipo de Archivo LV SCN Pto. Ctrl. Hora de Punto de Control Nombre
1 Full 2747434 24/08/07 C:\ORACLEXE\ORADATA\XE\SYSTEM
.DBF
2 Full 2747434 24/08/07 C:\ORACLEXE\ORADATA\XE\UNDO.D
BF
3 Full 2747434 24/08/07 C:\ORACLEXE\ORADATA\XE\SYSAUX
.DBF
4 Full 2747434 24/08/07 C:\ORACLEXE\ORADATA\XE\USERS.
DBF
Clave BS Tipo LV Tama±o Tipo de Dispositivo Tiempo Transcurrido Hora de F
inalizaci¾n
16 Full 6.83M DISK 00:00:01 24/08/07
Clave BP: 16 Estado: EXPIRED Comprimido: NO Etiqueta: TAG20070824T12
5005
Nombre de Parte: E:\RESPALDO\XE\AUTOBACKUP\2007_08_24\O1_MF_S_631457405_
3DY31Y0H_.BKP
Archivo de Control Incluido: SCN de Punto de Control: 2747446 Hora de Pun
to de Control: 24/08/07
SPFILE Incluido: Hora de Modificaci¾n: 24/08/07
Clave BS Tipo LV Tama±o Tipo de Dispositivo Tiempo Transcurrido Hora de F
inalizaci¾n
17 Full 736.04M DISK 00:00:20 24/08/07
Clave BP: 17 Estado: EXPIRED Comprimido: NO Etiqueta: TAG20070824T17
0028
Nombre de Parte: E:\RESPALDO\XE\BACKUPSET\2007_08_24\O1_MF_NNNDF_TAG2007
0824T170028_3DYKQGTC_.BKP
Lista de Archivos de Datos en el juego de copias de seguridad 17
Tipo de Archivo LV SCN Pto. Ctrl. Hora de Punto de Control Nombre
1 Full 2773728 24/08/07 C:\ORACLEXE\ORADATA\XE\SYSTEM
.DBF
2 Full 2773728 24/08/07 C:\ORACLEXE\ORADATA\XE\UNDO.D
BF
3 Full 2773728 24/08/07 C:\ORACLEXE\ORADATA\XE\SYSAUX
.DBF
4 Full 2773728 24/08/07 C:\ORACLEXE\ORADATA\XE\USERS.
DBF
Clave BS Tipo LV Tama±o Tipo de Dispositivo Tiempo Transcurrido Hora de F
inalizaci¾n
18 Full 6.83M DISK 00:00:02 24/08/07
Clave BP: 18 Estado: EXPIRED Comprimido: NO Etiqueta: TAG20070824T17
0054
Nombre de Parte: E:\RESPALDO\XE\AUTOBACKUP\2007_08_24\O1_MF_S_631472454_
3DYKR7OZ_.BKP
Archivo de Control Incluido: SCN de Punto de Control: 2773741 Hora de Pun
to de Control: 24/08/07
SPFILE Incluido: Hora de Modificaci¾n: 24/08/07
Clave BS Tipo LV Tama±o Tipo de Dispositivo Tiempo Transcurrido Hora de F
inalizaci¾n
19 Full 740.95M DISK 00:00:20 27/08/07
Clave BP: 19 Estado: EXPIRED Comprimido: NO Etiqueta: TAG20070827T11
1642
Nombre de Parte: E:\RESPALDO\XE\BACKUPSET\2007_08_27\O1_MF_NNNDF_TAG2007
0827T111642_3F5TPWHN_.BKP
Lista de Archivos de Datos en el juego de copias de seguridad 19
Tipo de Archivo LV SCN Pto. Ctrl. Hora de Punto de Control Nombre
1 Full 2916556 27/08/07 C:\ORACLEXE\ORADATA\XE\SYSTEM
.DBF
2 Full 2916556 27/08/07 C:\ORACLEXE\ORADATA\XE\UNDO.D
BF
3 Full 2916556 27/08/07 C:\ORACLEXE\ORADATA\XE\SYSAUX
.DBF
4 Full 2916556 27/08/07 C:\ORACLEXE\ORADATA\XE\USERS.
DBF
Where it says 'Estado' (Status in english) I found this: 'EXPIRED', it seems that my 4 dbf files have some problem, right now i'm looking for a way to solve this, but with no luck.
I think i need a little help again...

CCA install error during init database (@UseMe.sql)

when I init the oracle database use @UseMe.sql
It give following errors.
how to fix it?
25907 [main] INFO $Revision: 3 $ - Node list size [1]
25922 [main] INFO $Revision: 222 $ - Inserting the following language => italian
25938 [main] INFO $Revision: 3 $ - Node list size [1]
25985 [main] INFO $Revision: 222 $ - Inserting the following language => chinese
26032 [main] ERROR $Revision: 3 $ - Cannot parse the com/taw/data/chinese/localelanguages.xml file, something wrong in the xml, leaving
org.xml.sax.SAXParseException: Document root element is missing
at org.apache.crimson.parser.Parser2.fatal(Unknown Source)
at org.apache.crimson.parser.Parser2.fatal(Unknown Source)
at org.apache.crimson.parser.Parser2.parseInternal(Unknown Source)
at org.apache.crimson.parser.Parser2.parse(Unknown Source)
at org.apache.crimson.parser.XMLReaderImpl.parse(Unknown Source)
at org.apache.crimson.jaxp.DocumentBuilderImpl.parse(Unknown Source)
at javax.xml.parsers.DocumentBuilder.parse(Unknown Source)
at com.taw.util.tawUtil.getNodeList(tawUtil.java:26)
at com.taw.work.LoadData.getNodeList(LoadData.java:1892)
at com.taw.work.LoadData.processLanguages(LoadData.java:2684)
at com.taw.work.LoadData.processSiebelLanguages(LoadData.java:1824)
at com.taw.work.LoadData.processSystemData(LoadData.java:1874)
at com.taw.work.LoadData.initVersionVariable(LoadData.java:297)
at com.taw.work.LoadData.testDatabaseConnection(LoadData.java:220)
at com.taw.work.LoadData.main(LoadData.java:2826)
Exception in thread "main" org.xml.sax.SAXParseException: ????????
at org.apache.crimson.parser.Parser2.fatal(Unknown Source)
at org.apache.crimson.parser.Parser2.fatal(Unknown Source)
at org.apache.crimson.parser.Parser2.parseInternal(Unknown Source)
at org.apache.crimson.parser.Parser2.parse(Unknown Source)
at org.apache.crimson.parser.XMLReaderImpl.parse(Unknown Source)
at org.apache.crimson.jaxp.DocumentBuilderImpl.parse(Unknown Source)
at javax.xml.parsers.DocumentBuilder.parse(Unknown Source)
at com.taw.util.tawUtil.getNodeList(tawUtil.java:26)
at com.taw.work.LoadData.getNodeList(LoadData.java:1892)
at com.taw.work.LoadData.processLanguages(LoadData.java:2684)
at com.taw.work.LoadData.processSiebelLanguages(LoadData.java:1824)
at com.taw.work.LoadData.processSystemData(LoadData.java:1874)
at com.taw.work.LoadData.initVersionVariable(LoadData.java:297)
at com.taw.work.LoadData.testDatabaseConnection(LoadData.java:220)
at com.taw.work.LoadData.main(LoadData.java:2826)
Edited by: tigger on Mar 5, 2009 5:16 AM

upgrade to jdk 1.5 fixed

ORA-01041 error when duplicating database to new host

I'm using RHEL 5 with Oracle 11g and I'm testing data guard.
I am trying to setup data guard by following this link:
http://www.databasejournal.com/features/oracle/article.php/3816751/Oracle-11g-Data-Guard-Building-a-Physical-Standby-Database.htm
I use the following command:
[oracle@linux-test ~]$ rman target sys/oracle auxiliary sys/oracle@stdby
Recovery Manager: Release 11.1.0.6.0 - Production on Tue Oct 6 11:54:47 2009
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: ORCL (DBID=1227314034)
connected to auxiliary database: STDBY (not mounted)
RMAN> RUN {
ALLOCATE CHANNEL d1 TYPE DISK;
ALLOCATE CHANNEL d2 TYPE DISK;
ALLOCATE AUXILIARY CHANNEL cnv1 TYPE DISK;
ALLOCATE AUXILIARY CHANNEL cnv2 TYPE DISK;
DUPLICATE TARGET DATABASE
FOR STANDBY
FROM ACTIVE DATABASE
DORECOVER
SPFILE
SET db_unique_name='stdby'
SET control_files='/home/u01/app/oracle/oradata/orcl/control01.ctl'
SET log_file_name_convert='/home/u01/app/oracle/oradata/orcl/','/home/u01/app/oracle/oradata/stdby/'
SET log_archive_dest_1='location=/home/u01/app/oracle/flash_recovery_area/STDBY/ valid_for=(ALL_LOGFILES,ALL_ROLES) db_unique_name=stdby'
SET log_archive_dest_2='service=orcl ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=orcl'
SET fal_client='stdby'
SET fal_server='orcl'
SET standby_file_management='AUTO'
SET log_archive_config='dg_config=(orcl,stdby)'
NOFILENAMECHECK;
When it's starting datafile copy, I get this error:
channel d1: starting datafile copy
input datafile file number=00001 name=/home/u01/app/oracle/oradata/orcl/system01.dbf
channel d2: starting datafile copy
input datafile file number=00002 name=/home/u01/app/oracle/oradata/orcl/sysaux01.dbf
RMAN-03009: failure of backup command on d1 channel at 10/06/2009 11:56:41
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03113: end-of-file on communication channel
channel d1 disabled, job failed on it will be run on another channel
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/06/2009 11:56:54
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on d2 channel at 10/06/2009 11:56:54
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03113: end-of-file on communication channel
I have googled it but I still have no solution yet.
Any idea please?
Sarith

Use a 'Try and Error' strategy, remove the manual channel allocations from the script, these are not mandatory. Let RMAN automatically allocate channels.
Werner

Dbowner.sql error during PS database installation

Hello,
I am trying to run dbowner.sql. I have logged into SQLPlus as sysdba.
I am getting the following error and was wondering if it was an issue? I have been able to verify that the PSDBOWNER table was created even though it is empty at this point. The spool off command is run.
SQL> CONNECT SYSTEM/MANAGER;
ERROR:
ORA-01017: invalid username/password; logon denied
Warning: You are no longer connected to Oracle
SQL: REVOKE CONNECT, RESOURCE, DBA FROM PS;
SP2-0640: Not connected
SQL>
SQL>spool off
Many thanks.

user10567162 wrote:
SQL> CONNECT SYSTEM/MANAGER; The SYSTEM account password is maybe not MANAGER onto your database. Modify the script according to your own SYSTEMS's password.
Nicolas.

SQL Server error during create database through jdbc

Hi ,
Can anybody figure why I get the following exception
java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Line 1: Incorrect syntax near '9876'.
at com.microsoft.jdbc.base.BaseExceptions.createException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.sqlserver.tds.TDSRequest.processErrorToken(Unknown Source)
at com.microsoft.jdbc.sqlserver.tds.TDSRequest.processReplyToken(Unknown Source)
I am trying to create a new database through jdbc, I use only numeric characters in the database name.
I can create the same database through SQL Enterprise Manager.
-vikram

The name of the database is 9876?
Plan A: save yourself trouble and start database/table/column names with a letter.
Plan B: if you really must, try quoting the database name: create database "9867".

Error while creating database instance during PI instalation

Hi Team,
I am in the installation phase of SAP PI with MAXDB as back end.In the
phase "create database instance" i am facing the following issue
"An error occurred while processing option SAP EHP1 for SAP NetWeaver
PI/Mobile/Banking 7.1 > MaxDB > SAP Systems > Process Integration >
Standard System > Standard System( Last error reported by the step:
Error during execution of command identifier 'ACTIVATE'"
Can you help me in resolving this issue at the earliest.Also i have attached
the sapinst_dev log filke in this incident along with the
error screenshot
Thanks,
Satheesh E

Target node does not exist and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE 2014-09-08 16:31:08.874 [syxxcnode.cpp:425]
 CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/__instana_tmp.1.xml, ISyNode::CopyMoveMode_t 0x3)
 lib=syslib module=syslib
Moved C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/__instana_tmp.xml to C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/__instana_tmp.1.xml
INFO 2014-09-08 16:31:08.905 [synxcpath.cpp:799]
 CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\NW711\ADA\INSTALL\STD\AS\__instana_tmp.xml.
TRACE 2014-09-08 16:31:10.796 [cstatisticmanager.cpp:2241]
 CStatisticManager::writeInstallationSlanaFile_Intern
TRACE 2014-09-08 16:31:10.811 [syxxcfile.cpp:85]
 CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/instslana.1.xml, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
 lib=syslib module=syslib
Target node does not exist and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE 2014-09-08 16:31:10.811 [syxxcnode.cpp:425]
 CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/instslana.1.xml, ISyNode::CopyMoveMode_t 0x3)
 lib=syslib module=syslib
Moved C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/instslana.xml to C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/instslana.1.xml
INFO 2014-09-08 16:31:10.811 [synxcfile.cpp:149]
 CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
 lib=syslib module=syslib
Removed file C:\Program Files\sapinst_instdir\NW711\ADA\INSTALL\STD\AS\instslana.xml.
INFO 2014-09-08 16:31:10.811 [synxcpath.cpp:799]
 CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\NW711\ADA\INSTALL\STD\AS\instslana.xml.
TRACE 2014-09-08 16:31:10.889
SAPInst calls the LogInquirer. The output of the LogInquirer can be found in file sapinst_loginquirer.log.
TRACE 2014-09-08 16:31:15.669 [iaxxgenimp.cpp:638]
 CGuiEngineImp::showMessageBox()
<html> <head> </head> <body> An error occurred while processing option SAP EHP1 for SAP NetWeaver PI/Mobile/Banking 7.1 > MaxDB > SAP Systems > Process Integration > Standard System > Standard System( Last error reported by the step: Error during execution of command identifier 'ACTIVATE' : <DBMException -24988 ERR_SQL SQL error
-2014,Identifier too long>). You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose Log Files to get more information about the error. </li> <li> Stop the option and continue later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS. </body></html>
TRACE 2014-09-08 16:31:15.669 [iaxxgenimp.cpp:1031]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
INFO 2014-09-08 16:31:19.434 [sixxcstepexecute.cpp:1002]
An error occurred and the user decided to retry the current step: "|NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_ADA_DB|ind|ind|ind|ind|nw_ada_db|0|SdbPreInstanceDialogs|ind|ind|ind|ind|preinstance_dialogs|0|SdbInstanceDialogs|ind|ind|ind|ind|instance_dialogs|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|instance_create|0|sdb_instance_activate".
INFO 2014-09-08 16:31:19.450 [synxccuren.cpp:887]
 CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS)
 lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS.
TRACE 2014-09-08 16:31:19.465 [syxxcfile.cpp:85]
 CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/stepLogMessages.2.xml, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
 lib=syslib module=syslib
Target node does not exist and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE 2014-09-08 16:31:19.465 [syxxcnode.cpp:425]
 CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/stepLogMessages.2.xml, ISyNode::CopyMoveMode_t 0x3)
 lib=syslib module=syslib
Moved C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/stepLogMessages.xml to C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/stepLogMessages.2.xml
TRACE 2014-09-08 16:31:19.497
Instantiating new NWUsageTypeBasic
TRACE 2014-09-08 16:31:19.497
NWUsageTypeBasic() done
TRACE 2014-09-08 16:31:19.497
Call block: SDB_INSTANCE_CREATE_ind_ind_ind_ind
 function: SDB_INSTANCE_CREATE_ind_ind_ind_ind_PreStepPhase_sdb_instance_activate_Preprocess
is validator: false
TRACE 2014-09-08 16:31:19.543 [sixxcstepexecute.cpp:839]
Execution of preprocess block of |NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_ADA_DB|ind|ind|ind|ind|nw_ada_db|0|SdbPreInstanceDialogs|ind|ind|ind|ind|preinstance_dialogs|0|SdbInstanceDialogs|ind|ind|ind|ind|instance_dialogs|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|instance_create|0|sdb_instance_activate returns TRUE
TRACE 2014-09-08 16:31:19.575
Instantiating new NWUsageTypeBasic
TRACE 2014-09-08 16:31:19.575
NWUsageTypeBasic() done
TRACE 2014-09-08 16:31:19.575
Call block: SDB_INSTANCE_CREATE_ind_ind_ind_ind
 function: SDB_INSTANCE_CREATE_ind_ind_ind_ind_PreStepPhase_sdb_instance_activate
is validator: false
TRACE 2014-09-08 16:31:19.621
WorkDir: C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS
TRACE 2014-09-08 16:31:19.621
SdbOperations.callSdbCmdJar() Use java home : C:/Users/EGSAPI~1/AppData/Local/Temp/sapinst_exe.4716.1410173586/jre
TRACE 2014-09-08 16:31:19.637
SDB invoking java call:
C:\Users\EGSAPI~1\AppData\Local\Temp\sapinst_exe.4716.1410173586\jre\bin\java.exe -classpath "C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS\sdb_sl_lib.jar;C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS\sdb_sl_lib_api.jar;C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS\sdb_core.jar" com.sap.sdb.core.main.cmd.SdbCmdMain
TRACE 2014-09-08 16:31:19.637 [synxcchapp.cpp:275]
 CSyChildApplicationImpl::doStart() lib=syslib module=syslib
Going to call CreateProcess/CreateProcessAsUser for 'C:\Users\EGSAPI~1\AppData\Local\Temp\sapinst_exe.4716.1410173586\jre\bin\java.exe' now.
TRACE 2014-09-08 16:31:19.637 [synxcchapp.cpp:575]
 CSyChildApplicationImpl::doStart() lib=syslib module=syslib
Trying to start C:\Users\EGSAPI~1\AppData\Local\Temp\sapinst_exe.4716.1410173586\jre\bin\java.exe CSySysLibCallsWrapper::syscallwrapper()->__CreateProcess__(NULL, <command line for executable C:\Users\EGSAPI~1\AppData\Local\Temp\sapinst_exe.4716.1410173586\jre\bin\java.exe, NULL, NULL, TRUE, 0x420, NULL, NULL, &StartupInfo, &ProcessInfo)
TRACE 2014-09-08 16:31:19.637 [synxcchapp.cpp:653]
 CSyChildApplicationImpl::doStart() lib=syslib module=syslib
A child process has been started. Pid = 4956. Executable name: C:\Users\EGSAPI~1\AppData\Local\Temp\sapinst_exe.4716.1410173586\jre\bin\java.exe
TRACE 2014-09-08 16:31:19.637

Errors during duplicating database.

Similar Messages

Maybe you are looking for