Error during Export process to Hyperion Planning:

Hello All,
I am trying to load data to Hyperion Planning from EBS GL. I have completed the setup including setting up source, target, mappings, rules, etc. The import and validate process from EBS is working fine but export to Hyperion Planning fails right away. In my limited experience with FDMEE, I have not seen this error before and your help is greatly appreciated.
Here is an excerpt of error from FDMEE process details which is the same error shown in ODI. Everything before this process seems to be working. It seems like it is complaining about a host name but not sure which host name should I be looking at.
Environment: EBS12, FDMEE 11.1.2.3.520, Everything is on 64bit Linux
Error:
2015-01-14 08:53:25,578 DEBUG [AIF]: AIFUtil.callOdiServlet - START
2015-01-14 08:53:25,690 FATAL [AIF]: Error in CommData.loadData
Traceback (most recent call last):
File "<string>", line 4853, in loadData
File "<string>", line 1122, in callOdiServlet
File "__pyclasspath__/urllib2.py", line 124, in urlopen
File "__pyclasspath__/urllib2.py", line 387, in open
File "__pyclasspath__/urllib2.py", line 497, in http_response
File "__pyclasspath__/urllib2.py", line 425, in error
File "__pyclasspath__/urllib2.py", line 360, in _call_chain
File "__pyclasspath__/urllib2.py", line 506, in http_error_default
HTTPError: HTTP Error 504: Unknown Host
2015-01-14 08:53:25,691 DEBUG [AIF]: CommData.updateWorkflow - START
2015-01-14 08:53:25,691 DEBUG [AIF]:
        UPDATE TLOGPROCESS
        SET PROCESSENDTIME = CURRENT_TIMESTAMP
        ,PROCESSSTATUS = 32
          ,PROCESSENTLOAD = 0
          ,PROCESSENTLOADNOTE = 'Load Error'
        WHERE PARTITIONKEY = 3 AND CATKEY = 1 AND PERIODKEY = '2011-04-30' AND RULE_ID = 24
2015-01-14 08:53:25,692 DEBUG [AIF]: CommData.updateWorkflow - END
2015-01-14 08:53:25,692 DEBUG [AIF]: Comm.executeScript - START
2015-01-14 08:53:25,692 DEBUG [AIF]: The following script does not exist: /u01/fdmee_app/ALPLAN/data/scripts/event/AftLoad.py
2015-01-14 08:53:25,692 DEBUG [AIF]: Comm.executeVBScript - START
2015-01-14 08:53:25,693 DEBUG [AIF]: The following script does not exist: \u01\fdmee_app\ALPLAN\data\scripts\event\AftLoad.vbs
2015-01-14 08:53:25,693 DEBUG [AIF]: Comm.executeVBScript - END
2015-01-14 08:53:25,693 DEBUG [AIF]: Comm.executeScript - END
2015-01-14 08:53:25,746 DEBUG [AIF]: Comm.finalizeProcess - START
2015-01-14 08:53:25,747 DEBUG [AIF]: CommData.updateRuleStatus - START
2015-01-14 08:53:25,747 DEBUG [AIF]:
    UPDATE AIF_BALANCE_RULES
    SET STATUS = CASE 'FAILED'
      WHEN 'SUCCESS' THEN
        CASE (
          SELECT COUNT(*)
          FROM AIF_PROCESS_DETAILS pd
          WHERE pd.PROCESS_ID = 173
          AND pd.STATUS IN ('FAILED','WARNING')
        WHEN 0 THEN 'SUCCESS'
        ELSE (
          SELECT MIN(pd.STATUS)
          FROM AIF_PROCESS_DETAILS pd
          WHERE pd.PROCESS_ID = 173
          AND pd.STATUS IN ('FAILED','WARNING')
        END
      ELSE 'FAILED'
    END
    WHERE RULE_ID = 24
2015-01-14 08:53:25,748 DEBUG [AIF]: CommData.updateRuleStatus - END
2015-01-14 08:53:25,749 FATAL [AIF]: Error in COMM Load Data
2015-01-14 08:53:25,749 DEBUG [AIF]: Comm.updateProcess - START
2015-01-14 08:53:25,751 DEBUG [AIF]: Comm.updateProcess - END
2015-01-14 08:53:25,752 DEBUG [AIF]: The fdmAPI connection has been closed.
2015-01-14 08:53:25,753 INFO [AIF]: FDMEE Process End, Process ID: 173

Yes it does. I was able to connect with planning and can see all planning dimensions in FDMEE. In this instance, everything is installed on the same box so it better be resolving the host

Similar Messages

ERPI Error during Export data to GL for period 2012

Hi, experts
When I write back data from Planning to EBS, I encounter the following error during Export data to GL for period 2012. I have confirmed that Planning data has been upload to ERPI.
Do you have any hints on this error for me? Thanks a lot.
Log:
,COALESCE(ppa.YEARTARGET, pp.YEARTARGET) YEARTARGET
,CASE
WHEN (INSTR(UPPER(wld.TEMP_COLUMN_NAME),'AMOUNT',1) = 1) THEN
CAST(SUBSTR(wld.TEMP_COLUMN_NAME,7,LENGTH(wld.TEMP_COLUMN_NAME)) AS NUMERIC(15,0))
ELSE 0
END ENTITY_NAME_ORDER
FROM (
AIF_WRITEBACK_LOAD_DTLS wld
LEFT OUTER JOIN TPOVPERIODADAPTOR_FLAT_V ppa
ON ppa.INTSYSTEMKEY = 'JC2PLN'
AND ppa.PERIODTARGET = wld.DIMENSION_NAME
AND ppa.YEARTARGET = 'FY12'
) LEFT OUTER JOIN TPOVPERIOD_FLAT_V pp
ON pp.PERIODTARGET = wld.DIMENSION_NAME
AND pp.YEARTARGET = 'FY12'
WHERE wld.LOADID = 176
AND wld.COLUMN_TYPE = 'DATA'
) query
GROUP BY PERIODTARGET
,YEARTARGET
,ENTITY_NAME_ORDER
) q
,TPOVPERIOD p
,AIF_GL_PERIODS_STG prd
WHERE p.PERIODKEY = q.PERIODKEY
AND NOT EXISTS (
SELECT 1
FROM AIF_PROCESS_DETAILS pd
WHERE pd.PROCESS_ID = 176
AND pd.ENTITY_TYPE = 'PROCESS_WB_EXP'
AND pd.ENTITY_ID = prd.YEAR
AND prd.SOURCE_SYSTEM_ID = 3
AND prd.SETID = '0'
AND prd.CALENDAR_ID = '10000'
AND prd.PERIOD_TYPE = 'Month'
AND prd.START_DATE > p.PRIORPERIODKEY
AND prd.START_DATE <= p.PERIODKEY
AND prd.ADJUSTMENT_PERIOD_FLAG = 'N'
ORDER BY prd.YEAR
2012-10-12 11:05:10,078 INFO [AIF]: COMM Writeback Period Processing - Insert Periods into Process Details - END
2012-10-12 11:05:10,516 INFO [AIF]: COMM End Process Detail - Update Process Detail - START
2012-10-12 11:05:10,594 DEBUG [AIF]:
UPDATE AIF_PROCESS_DETAILS
SET STATUS = 'FAILED'
,RECORDS_PROCESSED = CASE
WHEN RECORDS_PROCESSED IS NULL THEN 0
ELSE RECORDS_PROCESSED
END + 0
,EXECUTION_END_TIME = CURRENT_TIMESTAMP
,LAST_UPDATED_BY = CASE
WHEN ('native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' IS NULL) THEN LAST_UPDATED_BY
ELSE 'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER'
END
,LAST_UPDATE_DATE = CURRENT_TIMESTAMP
WHERE PROCESS_ID = 176
AND ENTITY_TYPE = 'PROCESS_WB_EXP'
AND ENTITY_NAME = '2012'
2012-10-12 11:05:10,594 INFO [AIF]: COMM End Process Detail - Update Process Detail - END
2012-10-12 11:05:10,719 INFO [AIF]: ERPI Process End, Process ID: 176

I do not have any hints on this.
Would need to see the ODI Operator when the process is ran.

DRM Batch Client error during export

Hello,
I am experiencing an error when using the DRM Batch Client to execute export books. The same export process fails sometimes and runs to completion successfully at other times. When it fails, it does not always fail in the same place within the export process, and the error is as follows:
2/2/2011 8:31:40 PM - ERemotableException with message: "Server was unable to process request. ---> Error during Export. Export was unable to run. Error: Timeout expired" while running Export Book
2/2/2011 8:31:40 PM - => ERROR: Data Relationship Management Server returned error: "Server was unable to process request. ---> Error during Export. Export was unable to run. Error: Timeout expired."
2/2/2011 8:31:40 PM - *** MDMConnect stopping ***
Because this issue is sporadic, it seems like there could be a few possible causes:
1. Network issues
2. SQL connection/time-out issues -- These particular exports are writing to SQL tables versus flat files
3. Am wondering if there are any known issues with the MDMConnect? Or are there time-out settings we can adjust?
We currently have our in-house IT chasing down any possible network or SQL issues. Does anyone know of any issues with the batch client, or have ideas on any other possible causes? Any help is greatly appreciated. Thanks!
EJ

There is a timeout setting in DRM system preferences and there are mulitlple session timeout settings in IIS that you may need to configure. Try the system preference first. For very large jobs, ie. hundreds of thousands of nodes with hundreds of properties per node, you'll need to update settings in IIS as well.

Back up and Restore Process of Hyperion Planning(V9.3.1)

Hi All,
Greetings!!!!
Could anybody help me in getting the Backup and restore process of Hyperion Planning 9.3.1 Application w.r.t to Relation Database stand point (We are using SQL Server 2005).
Thanks in Advance.
Regards,
tvmk
Edited by: tvmk on Jan 11, 2010 9:30 PM

Have you a read through the " [Hyperion Backup and Recovery Guide|http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hfm_backup.pdf] "
Cheers
John
http://john-goodwin.blogspot.com/

DYNAMIC_CALL_FAILURE Error during proxy processing An exception with the ty

Hi,
SRM 7.0 contains 2 clients:
Sender: 100 for EBP, logical system is CLNT100
Receiver: 200 for SUS, logical system is CLNT200
both the clients are connected through PI 7.0, logical system of PI is CLNT001.
From SPROXY of 100EBP, i'm executing the outbound proxy, in moni sent msg success.
In PI also msg is processed.
But in SUS200, it is showing below error msg:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>CL_BBPX_TRADING_PARTNER_SUS_IN</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Pls help in resolving the same....
tnx n rgds,
balu

Hi,
How did you solve the issue? Can you please provide the solution.
Thanks,
-Devi Swain

Error during proxy processing

Hi Experts,
We have a web service hosted on PI and getting the Tax Jurisdiction values from Taxware via ECC(ECC has a TCP/IP connection to connect to Taxware system, From there ECC gets Taxjurisdiction Codes and gives back to PI).
When we make a call to this Web service following Error response has been given. Please let us know what could be the reason.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1 />
<SAP:P2>ZCL_GET_TAX_IN</SAP:P2>
<SAP:P3>GET_TAX_JURISDICTION_SYNC</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing Message E TAX_TXJCD 110 cannot be processed in plugin mode HTTP</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Thanks,
Sekhar.J

Hi,
We are using XI adapter. The same Web Service is working good in Development and Quality Enviroments, I am wondering why it is failing in Production Environement intermittently. And also in ECC we are using TCP/IP connection to fetch Tax Jurisdiction codes from TaxWare System. This TCP/IP connection was configured in SM59 of ECC. PI will make call to ECC and ECC will make call to TaxWare and returns the result back PI.
Thanks,
Sekhar.J

Error during proxy processing An exception with the type CX_BBPX1_STD_MESSA

Hello,everyone!
My PI version is 7.11,SRM SUS version is 7.0,ECC version is 6.0 ,When I import XI SRM CONTEN,sending IDOC in ECC,there is a error some of the mesages:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>CL_BBPX1_SUSPO_IN</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Detialed error from SXMB_MONI,
Error in XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner 0015111411 with type 'Vendor' I:R5:553 -'Different country' field contents deleted because identical to 'Country' E:BS:002 -"Create" is not allowed (SUS Purchase Order 7100076527 ) Program: CX_BBP_BD_ERROR===============CP; include: CX_BBP_BD_ERROR===============CM002; Line:
This issue only ocuured for partner 0015111411, but we tried with other partner ID and those messages are processed sucessfully and PO is created.
I have a doubt that, is there functionality in proxy to compare the country with partner in SRM system. Could please anyone help me one the same.
Regards,
Baskaran K

HI,
This is a standard proxy. I'm not sure how to debug the proxy with payload. Could you please tell me the steps.
We have one more error message
<FAULT_TEXT>Error in XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner XY91 with type 'Sold-to Party' E:BS:002 -"Create" is not allowed (SUS Purchase Order 7100076526 ) Program: CX_BBP_BD_ERROR===============CP; include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
Is there any table to check these details like Sold-to Part, Vendor etc in SRM system?
Regards,
Baskaran K

Error during Proxy Processing from ECC system

Hi All,
I had created Webservice using ABAP in ECC system with Message interface designed in XI system. This Webservice will simply displays employee address when you enter employee id and address type.During my testing of Web service in ECC system via Tcode WSADMIN, I am getting below error
"An error has occurred. Maybe the request is not accepted by the server: "
"Error during proxy processing"
Request
POST /sap/bc/srt/xip/sap/Z_ADDRESS_01?sap-client=100 HTTP/1.1
Host: rpmsap3.rapidigm.com:8080
Content-Type: text/xml
Connection: close
authorization: <value is hidden>
Content-Length: 389
SOAPAction: ""
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Body><ns1:Request_Message xmlns:ns1='http://sap2webservice'><Employee_Id>MM01</Employee_Id><Address_Type>AM</Address_Type><Date>11/11/2006</Date></ns1:Request_Message></SOAP-ENV:Body></SOAP-ENV:Envelope>
Response
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Body><ns1:Request_Message xmlns:ns1='http://sap2webservice'><Employee_Id>MM01</Employee_Id><Address_Type>AM</Address_Type><Date>11/11/2006</Date></ns1:Request_Message></SOAP-ENV:Body></SOAP-ENV:Envelope> HTTP/1.1 500 Internal Server Error
set-cookie: sap-usercontext=sap-client=100; path=/
content-type: text/xml; charset=utf-8
content-length: 270
sap-srt_id: 20061111/154215/v1.00_final_6.40/A901A40749EEA74BB8D8AB72B56C02A7
server: SAP Web Application Server (1.0;640)
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"><soap-env:Body><soap-env:Fault><faultcode>soap-env:Server</faultcode><faultstring xml:lang="en">Error during proxy processing</faultstring></soap-env:Fault></soap-env:Body></soap-env:Envelope>
Appreciate any help on above issue
Regards
Manish Mundra

Hi All,
Please help on below issue.
Thanks in Advance
Regards
Manish

Error during proxy processing An exception with the type CX_SY_OPEN_SQL_DB

Hi All,
I am facing the following problem in production server when even the file got processed successfully .
Error during proxy processing An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause The system tried to insert a data record, even though a data record with the same primary key already exists
Can you please suggest how it can be handled?
Regards,
Saras

You need to debug your proxy program and check all the insert statemrnts. Looks like there is an exception being thrown in the proxy (may be after the completion logic to push the data in to db) which is not being caught.
Proxies are object oriented and it is a good practice to implement Exception Handling mechanism.
VJ

Error during export of J2EE_CONFIGENTRY

Hi,
While doing homogeneous system copy for CRM 2007 System it gives Error during export of J2EE_CONFIGENTRY.
below is the detail error report.
15.04.09 14:01:29 com.sap.inst.jload.Jload dbExport
SEVERE: Error during export of J2EE_CONFIGENTRY
15.04.09 14:01:29 com.sap.inst.jload.Jload logStackTrace
SEVERE: java.lang.NullPointerException
     at com.sap.sql.jdbc.mss.MssSQLExceptionAnalyzer.getCategory(MssSQLExceptionAnalyzer.java:112)
     at com.sap.sql.services.core.CoreServices.isDuplicateKeyException(CoreServices.java:133)
     at com.sap.sql.jdbc.direct.DirectPreparedStatement.processSQLException(DirectPreparedStatement.java:1189)
     at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeQuery(DirectPreparedStatement.java:285)
     at com.sap.sql.jdbc.common.CommonPreparedStatement.executeQuery(CommonPreparedStatement.java:185)
     at com.sap.inst.jload.db.DBTable.unload(DBTable.java:192)
     at com.sap.inst.jload.Jload.dbExport(Jload.java:179)
     at com.sap.inst.jload.Jload.executeJob(Jload.java:395)
     at com.sap.inst.jload.Jload.main(Jload.java:621)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
15.04.09 14:01:29 com.sap.inst.jload.db.DBConnection disconnect
INFO: disconnected
Thanks & Regards
Raj Kiran

Hi,
Search for sap notes on "J2EE_CONFIGENTRY"
service.sap.com/notes
You can get a better solution there.
Thanks and Regards
Jaianandh V

Error during export of xi-objects

Hi,
I get an strange error when trying to export objects from the repository and directory using "Transport Using File System". The error says "Error during export".
First we got the error "Internal error during pvc call: No space left on device" but this error disappeared without any actions from us and there is space left on the server.
Please help
Regards
Claes

Hi VJ,
It only says "Error during export".
/C

Planning - Recieving errors during configuration process

Hello,
We are currently installing System 11.1.1.1 using Weblogic 9.2 MP1. We have successfully installed and configured Shared Services, Workspace and Essbase. We have installed Planning but I keep recieving errors during the configuration process. The following errors are logged in the configtool_err.log file:
Feb 10, 2009, 07:18:10 AM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, The specified database is already configured.
(Feb 10, 2009, 07:19:59 AM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Error happen while trying to get Planning system DB info from registry.
(Feb 10, 2009, 07:30:10 AM), com.hyperion.cis.config.servers.WlsAppServer, ERROR, WebLogic Admin server has not started after about 10 minutes.
(Feb 10, 2009, 07:30:12 AM), com.hyperion.planning.HspDBConfigurator, ERROR, HP-9.5.0 product is not registered.
(Feb 10, 2009, 07:30:13 AM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Deployment failed. Admin server doesn't started.
(Feb 10, 2009, 07:41:35 AM), com.hyperion.cis.config.servers.WlsAppServer, ERROR, WebLogic Admin server has not started after about 10 minutes.
(Feb 10, 2009, 07:41:35 AM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Deployment failed. Admin server doesn't started.
(Feb 10, 2009, 07:50:05 AM), com.hyperion.planning.HspDBConfigurator, ERROR, HP-9.5.0 product is not registered.
Any thoughts or information would be much appreciated.
Thanks
Tony

Hi,
What O/S are you installing on?
Is it possible you can try and break down the configuration of planning.
So only have Shared Services / Open Ldap Services running, make sure you can log into shared services console
Run the configurator, choose planning > Configure Database (are you using a seperate database for each product, I am finding it helps with installations)
If you are select the "Perform 1st Time configuration of Database" - Chose Drop and re-create tables"
If successful move on to the configure - Deploy to application Server.
Cheers
John
http://john-goodwin.blogspot.com/

Essbase Version 11 Error During Export

Hi,
I have just installed Hyperion Essbase version 11 on windows 2003 Server, It’s a fresh install on new machine. I am getting following error during nightly backup.
After "Calc All" we export data to the following location. Hyperion\APP\DB. Same Maxl script works fine on version 7 of Essbase. If i export data manually its works fine, only issue i have during nightly back (Automated). Data size is 1.4 GB; Please let me know if you need some more information.
Error.. *ERROR - 1005000 - Ascii Backup: Failed to open [\PLAN\TEST\TEST_Export_AllData_1.txt]..*
Maxl Script:
MAXL> export database "PLAN"."TEST" all data to data_file
2>      "'\\PLAN\\TEST\\TEST_Export_AllData_1.txt'",
3>      "'\\PLAN\\TEST\\TEST_Export_AllData_2.txt'";
Error:
OK/INFO - 1019020 - Writing Free Space Information For Database [TEST].
OK/INFO - 1005029 - Parallel export enabled: Number of export threads [2].
*ERROR - 1005000 - Ascii Backup: Failed to open [\PLAN\TEST\TEST_Export_AllData_1.txt]..*
MaxL Shell completed with error
Thank you,
T.Khan

I tried with other path and it works. I really appreciate all your help. I used following maxl
export database "Plan"."Test" all data to data_file
C:\Hyperion\products\Essbase\EssbaseServer\app\PLAN\TEST\Export_AllDtata_1.txt,
C:\Hyperion\products\Essbase\EssbaseServer\app\PLAN\TEST\Export_AllDtata_2.txt;
What changes I need to make on my maxl. Do I need to make any changes on Variables? Here is my current Maxl
/*      Export Database                              */
/* Environment Variables: (set by calling script)               */
/* $ess_UserName      - Essbase username                     */
/* $ess_Password     - Essbase password                    */
/* $ess_Server          - Essbase server                    */
/* Local variables: (set by MaxL script)                    */
/* $APP               - Essbase application ($1 positional parameter)     */
/* $DB               - Essbase database ($2 positional parameter)     */
/* Any error returned from a MaxL command causes the               */
/* logic to branch to an error exit at end of the script           */
/* set local variables to values of positional parameters */
set APP=$1;
set DB=$2;
/* Login to Essbase */
login $ess_UserName $ess_Password on $ess_Server;
/* Export database in parallel to the database directory - all data */
export database "$APP"."$DB" all data to data_file
     "'\\$APP\\$DB\\$(DB)_Export_AllData_1.txt'",
     "'\\$APP\\$DB\\$(DB)_Export_AllData_2.txt'";
iferror 'ERROREXIT';
/* Normal Exit */
Thank You
T.Khan

[Error during Export] R3load exited with return code 11

Hi guys,
While performing and Unicode Migration, during Export Phase, Migration Monitor returned the following error while exporting a package
ERROR: 2014-06-01 10:57:44 com.sap.inst.migmon.LoadTask run
Unloading of 'REGUC' export package is interrupted with R3load error.
Process '/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error' exited with return code 11.
For mode details see 'REGUC.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
REGUC.log details:
(As you see, it does not provide reasons of this error, all messages are informative and alike all other Packages logs)
/usr/sap/ECP/DVEBMGS00/exe/R3load: START OF LOG: 20140601105052
/usr/sap/ECP/DVEBMGS00/exe/R3load: sccsid @(#) $Id: //bas/740_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
/usr/sap/ECP/DVEBMGS00/exe/R3load: version R7.40/V1.8
Compiled Jul 23 2013 21:30:53
/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1160
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
(RSCP) INFO: "REGUC001.xml" created.
(GSI) INFO: dbname   = "ECP20030615080638
(GSI) INFO: vname    = "ORACLE "
(GSI) INFO: hostname = "ecp "
(GSI) INFO: sysname = "SunOS"
(GSI) INFO: nodename = "ecp"
(GSI) INFO: release = "5.10"
(GSI) INFO: version = "Generic_142900-13"
(GSI) INFO: machine = "sun4u"
Tried to find what does R3load Return Code 11 means, but I couldnt find further information on this.
Any hint of what is causing this error?
(Please disregard any Filesystem issues since all of them have available space)
Best!

After using latest R3load patch, it provides furher information on the log file.
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.070) R3ldctl: fix CDS views creation in upgrade export mode (note 2
017805)
DBSL patchinfo (patches.h): (0.022) Smaller corrections in release 7.40 (th, dp, vmc, dpmon)
(note 1821404)
--------------------- End of patch information -------------------------
process id 27326
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1160
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
(RSCP) INFO: "REGUC003.xml" created.
(GSI) INFO: dbname   = "ECP20030615080638
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "ecp                                                             "
(GSI) INFO: sysname = "SunOS"
(GSI) INFO: nodename = "ecp"
(GSI) INFO: release = "5.10"
(GSI) INFO: version = "Generic_142900-13"
(GSI) INFO: machine = "sun4u"
(GSI) INFO: instno   = "6120023288"
(RTF) ########## WARNING ###########
        Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
(RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: cannot find version token "ver:" at line 1
(RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: unknown file format, assuming version 2
(EXP) INFO: table REGUC will be exported with sorting (task modifier)
------------------ C-STACK ----------------------
[0] t_splay ( 0x1020df850, 0xb3, 0x4386, 0x100a02078, 0x0, 0x1020df870 ), at 0xffffffff7b9629
94
[1] t_delete ( 0x1020df850, 0x4348, 0x1d9870, 0x1000d0408, 0xffffffff7bb3c000, 0x0 ), at 0xff
ffffff7b9627e4
[2] realfree ( 0x101ee7590, 0x1f82b1, 0x1d9cd0, 0x1f82b0, 0xffffffff7bb3c000, 0x101ee7590 ),
at 0xffffffff7b9623b0
[3] _malloc_unlocked ( 0x7d40, 0x200000, 0x101edf840, 0x0, 0x101ee7580, 0x0 ), at 0xffffffff7
b961eb4
[4] malloc ( 0x7d39, 0x2388, 0x1da428, 0x10038fe84, 0xffffffff7bb3c000, 0x2000 ), at 0xffffff
ff7b961c28
[5] rstg_get ( 0x2, 0x0, 0x2, 0x7d10, 0x0, 0x10077d8c0 ), at 0x10038ff4c
[6] c3_uc_new_cache ( 0x100a02078, 0x284db0, 0x284c00, 0x10077d8c0, 0x100a02108, 0xb3 ), at 0
x1000d1ce8
[7] c3_uc_seek_cache ( 0xb3, 0xff79, 0xffffffff7ffcae3e, 0x100a02078, 0x10189fa48, 0x10077d8c
0 ), at 0x1000d188c
[8] c3_uc_new_tabcache ( 0x0, 0xb3, 0x4386, 0x100a02078, 0xb3, 0x10077d8c0 ), at 0x1000d13fc
[9] c3_uc_insert_record_in_cache ( 0xffffffff7ffcb04e, 0x10189fa48, 0x100a02078, 0x100a024c8,
0xb3, 0x1058c8f84 ), at 0x1000d0408
[10] c3_uc_insert ( 0x0, 0x100a02078, 0x0, 0x0, 0x10077d8c0, 0xffffffff7ffcb04e ), at 0x1000c
f944
[11] c3_uc_convert_table_entry ( 0x1015c61f8, 0x0, 0x100a02078, 0x0, 0x10189f408, 0x31a000 ),
at 0x1000ce314
[12] c3_uc_convert_logic_table ( 0x1015c61f8, 0x100a02078, 0x0, 0x4a, 0x100638dc0, 0x10077d8c
0 ), at 0x1000cdb18
[13] c3_uc_convert_cluster_data ( 0x100a02078, 0xffffffff7ffcbc50, 0x1015c6428, 0x1015c61f8,
0x10077d8c0, 0x0 ), at 0x1000cd10c
[14] c3_uc_convert_cluster_item ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x1038
6f6e0, 0xffffffff7ffcbb8c, 0x100a02812 ), at 0x1000be1d4
[15] process_task ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x100a02810, 0x10063
32e0, 0x10077d8c0 ), at 0x1000b2f58
[16] CnvCluster ( 0x1014642d0, 0x100954670, 0x100aa9610, 0x2849b8, 0x284800, 0x6cb978 ), at 0
x1000b1f8c
[17] cnv_clust2 ( 0x100aa9580, 0xffffffff7ffcc258, 0x100954770, 0xfc0, 0x107d00, 0x100954670
), at 0x100062714
[18] cnv_cp ( 0x100aa9580, 0xffffffff7ffcc258, 0x100aa95e0, 0x0, 0x10077d8c0, 0x1d6c00 ), at
0x100064644
[19] process_buffer ( 0x100aa9580, 0xffffffff7ffcc258, 0xfff00, 0x100a97bd0, 0x10, 0x100aa95b
0 ), at 0x10007162c
[20] execute_table_unload ( 0xffffffff7ffed610, 0xffffffff7ffdc4b0, 0x0, 0x100aa9580, 0xfffff
fff7ffcc258, 0x10077d8c0 ), at 0x10006c488
[21] export_table_task ( 0xffffffff7ffed610, 0x0, 0xffffffff7ffdc368, 0xffffffff7ffcc330, 0xf
fffffff7ffeedb8, 0xffffffff7ffeec60 ), at 0x10006c934
[22] db_unload ( 0x100a97b0d, 0xffffffff7ffed610, 0x0, 0x10077d8c0, 0xffffffff7ffeec60, 0xfff
fffff7bb47540 ), at 0x10006d148
[23] main_r3ldmain ( 0x72ec00, 0xffffffff7ffff448, 0xffffffff7ffff228, 0xffffffff7bb47540, 0x
1005fc290, 0x0 ), at 0x1000514e0

Error during burning process

I am using OS10.4.6
Powermac G5
Final Cut HD4.5
IDVD 5.0.1
I have made a 27 minute movie in Final cut....i cannot seem to burn it in IDVD no matter what. I have been using this full time for 4 yrs and have never had this issue.
I have tested other movies and they burn fine...i have tried throwing away all the render files and re-rendering the movie in final cut and then re-exporting it out. i have exported it out in 2 different ways...no matter what i do, I keep getting an error during the burning process that says
there was an ERROR in the burning process
which is leading me to believe that some file within my final cut project is corrupt or problematic.
i have worked on this thing for about 50 hours and cannot start over from scratch, Help!

dejavu! http://discussions.apple.com/thread.jspa?threadID=512852&tstart=0
Ashley- I know you're probably getting desperate but please don't duplicate post.
I'm not real familiar with iDVD but I know you have to export a QT movie from FCP and then burn that right? Your QT Movie, was it a self contained QT or a refernce Movie. If you have no idea what I just asked, when you exported it and you went to File>Export>QT Movie> did you select the box that says "make movie self-contained"?
If so then a corrupt file is a moot (sp?) point. Can you open the QT Movie and watch it successfully in QT?
If you CAN watch it in QT then your problem probably lies in iDVD.
Answer these questions for us and we'll take the next step to getting a DVD in your hands.

Error during Export process to Hyperion Planning:

Similar Messages

Maybe you are looking for