ERPI Error during Export data to GL for period 2012

Hi, experts
When I write back data from Planning to EBS, I encounter the following error during Export data to GL for period 2012. I have confirmed that Planning data has been upload to ERPI.
Do you have any hints on this error for me? Thanks a lot.
Log:
,COALESCE(ppa.YEARTARGET, pp.YEARTARGET) YEARTARGET
,CASE
WHEN (INSTR(UPPER(wld.TEMP_COLUMN_NAME),'AMOUNT',1) = 1) THEN
CAST(SUBSTR(wld.TEMP_COLUMN_NAME,7,LENGTH(wld.TEMP_COLUMN_NAME)) AS NUMERIC(15,0))
ELSE 0
END ENTITY_NAME_ORDER
FROM (
AIF_WRITEBACK_LOAD_DTLS wld
LEFT OUTER JOIN TPOVPERIODADAPTOR_FLAT_V ppa
ON ppa.INTSYSTEMKEY = 'JC2PLN'
AND ppa.PERIODTARGET = wld.DIMENSION_NAME
AND ppa.YEARTARGET = 'FY12'
) LEFT OUTER JOIN TPOVPERIOD_FLAT_V pp
ON pp.PERIODTARGET = wld.DIMENSION_NAME
AND pp.YEARTARGET = 'FY12'
WHERE wld.LOADID = 176
AND wld.COLUMN_TYPE = 'DATA'
) query
GROUP BY PERIODTARGET
,YEARTARGET
,ENTITY_NAME_ORDER
) q
,TPOVPERIOD p
,AIF_GL_PERIODS_STG prd
WHERE p.PERIODKEY = q.PERIODKEY
AND NOT EXISTS (
SELECT 1
FROM AIF_PROCESS_DETAILS pd
WHERE pd.PROCESS_ID = 176
AND pd.ENTITY_TYPE = 'PROCESS_WB_EXP'
AND pd.ENTITY_ID = prd.YEAR
AND prd.SOURCE_SYSTEM_ID = 3
AND prd.SETID = '0'
AND prd.CALENDAR_ID = '10000'
AND prd.PERIOD_TYPE = 'Month'
AND prd.START_DATE > p.PRIORPERIODKEY
AND prd.START_DATE <= p.PERIODKEY
AND prd.ADJUSTMENT_PERIOD_FLAG = 'N'
ORDER BY prd.YEAR
2012-10-12 11:05:10,078 INFO [AIF]: COMM Writeback Period Processing - Insert Periods into Process Details - END
2012-10-12 11:05:10,516 INFO [AIF]: COMM End Process Detail - Update Process Detail - START
2012-10-12 11:05:10,594 DEBUG [AIF]:
UPDATE AIF_PROCESS_DETAILS
SET STATUS = 'FAILED'
,RECORDS_PROCESSED = CASE
WHEN RECORDS_PROCESSED IS NULL THEN 0
ELSE RECORDS_PROCESSED
END + 0
,EXECUTION_END_TIME = CURRENT_TIMESTAMP
,LAST_UPDATED_BY = CASE
WHEN ('native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' IS NULL) THEN LAST_UPDATED_BY
ELSE 'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER'
END
,LAST_UPDATE_DATE = CURRENT_TIMESTAMP
WHERE PROCESS_ID = 176
AND ENTITY_TYPE = 'PROCESS_WB_EXP'
AND ENTITY_NAME = '2012'
2012-10-12 11:05:10,594 INFO [AIF]: COMM End Process Detail - Update Process Detail - END
2012-10-12 11:05:10,719 INFO [AIF]: ERPI Process End, Process ID: 176

I do not have any hints on this.
Would need to see the ODI Operator when the process is ran.

Similar Messages

  • Incorrect XML disply for ALERTCATEGORY error during deserialization data lo

    Hi,
    I am getting below error while executing first scenario in Quality enviornment, i have not defined and trasported any ALERTS.
    Incorrect XML disply for ALERTCATEGORY error during deserialization data loss occured when converting 011136c23c9430359b57c0ef8949c630
    this error stoping my interface executing...did anyone experienced this issue??
    put some light on this.
    many thanks,
    Raj

    Have you checked this SAP Note # 1394710 ?

  • DRM Batch Client error during export

    Hello,
    I am experiencing an error when using the DRM Batch Client to execute export books. The same export process fails sometimes and runs to completion successfully at other times. When it fails, it does not always fail in the same place within the export process, and the error is as follows:
    2/2/2011 8:31:40 PM - ERemotableException with message: "Server was unable to process request. ---> Error during Export. Export was unable to run. Error: Timeout expired" while running Export Book
    2/2/2011 8:31:40 PM - => ERROR: Data Relationship Management Server returned error: "Server was unable to process request. ---> Error during Export. Export was unable to run. Error: Timeout expired."
    2/2/2011 8:31:40 PM - *** MDMConnect stopping ***
    Because this issue is sporadic, it seems like there could be a few possible causes:
    1. Network issues
    2. SQL connection/time-out issues -- These particular exports are writing to SQL tables versus flat files
    3. Am wondering if there are any known issues with the MDMConnect? Or are there time-out settings we can adjust?
    We currently have our in-house IT chasing down any possible network or SQL issues. Does anyone know of any issues with the batch client, or have ideas on any other possible causes? Any help is greatly appreciated. Thanks!
    EJ

    There is a timeout setting in DRM system preferences and there are mulitlple session timeout settings in IIS that you may need to configure. Try the system preference first. For very large jobs, ie. hundreds of thousands of nodes with hundreds of properties per node, you'll need to update settings in IIS as well.

  • Error while exporting data

    i get the following error while exporting data evn after running catexp.sql
    EXP-00056: ORACLE error 31600 encountered
    ORA-31600: invalid input value EMIT_SCHEMA for parameter NAME in function SET_TRANSFORM_PARAM
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
    ORA-06512: at "SYS.DBMS_METADATA_INT", line 3926
    ORA-06512: at "SYS.DBMS_METADATA_INT", line 4050
    ORA-06512: at "SYS.DBMS_METADATA", line 836
    ORA-06512: at line 1
    can anyone help me on this

    copy past from the notes referred above -
    Symptom(s)
    ~~~~~~~~~~
    You are performing a database export against your 9.2 database. The database
    export abnormally ends with the following errors:
    EXP-00056: ORACLE error 31600 encountered
    ORA-31600: invalid input value EMIT_SCHEMA for parameter NAME in function
    SET_TRANSFORM_PARAM
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
    ORA-06512: at "SYS.DBMS_METADATA_INT", line 3926
    ORA-06512: at "SYS.DBMS_METADATA_INT", line 4050
    ORA-06512: at "SYS.DBMS_METADATA", line 836
    ORA-06512: at line 1
    EXP-00000: Export terminated unsuccessfully
    Change(s)
    ~~~~~~~~~~
    One of the known causes for the error above is that a patchset was recently
    applied to the database but one or more of the patchset steps were not
    performed.
    Cause
    ~~~~~~~
    View the readme notes for the patchset recently installed. You will see a step
    that should have been performed that directs you to run the script named
    catpatch.sql. Very likely this step was never performed.
    Fix
    ~~~~
    As the sysdba user run the catpatch.sql script found in the directory named
    $ORACLE_HOME/rdbms/admin. Before you submit this script, view it's contents.
    You may see that this script places the database in restricted mode.
    rgds

  • Error during export of J2EE_CONFIGENTRY

    Hi,
    While doing homogeneous system copy for CRM 2007 System it gives Error during export of J2EE_CONFIGENTRY.
    below is the detail error report.
    15.04.09 14:01:29 com.sap.inst.jload.Jload dbExport
    SEVERE: Error during export of J2EE_CONFIGENTRY
    15.04.09 14:01:29 com.sap.inst.jload.Jload logStackTrace
    SEVERE: java.lang.NullPointerException
         at com.sap.sql.jdbc.mss.MssSQLExceptionAnalyzer.getCategory(MssSQLExceptionAnalyzer.java:112)
         at com.sap.sql.services.core.CoreServices.isDuplicateKeyException(CoreServices.java:133)
         at com.sap.sql.jdbc.direct.DirectPreparedStatement.processSQLException(DirectPreparedStatement.java:1189)
         at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeQuery(DirectPreparedStatement.java:285)
         at com.sap.sql.jdbc.common.CommonPreparedStatement.executeQuery(CommonPreparedStatement.java:185)
         at com.sap.inst.jload.db.DBTable.unload(DBTable.java:192)
         at com.sap.inst.jload.Jload.dbExport(Jload.java:179)
         at com.sap.inst.jload.Jload.executeJob(Jload.java:395)
         at com.sap.inst.jload.Jload.main(Jload.java:621)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    15.04.09 14:01:29 com.sap.inst.jload.db.DBConnection disconnect
    INFO: disconnected
    Thanks & Regards
    Raj Kiran

    Hi,
    Search for sap notes on "J2EE_CONFIGENTRY"
    service.sap.com/notes
    You can get a better solution there.
    Thanks and Regards
    Jaianandh V

  • Error during creation of transfer orders for material

    Hi,
            We are doing a transfer of stock from one storage with WM to a storage without WM.
    But system does not finish the process automatically displaing the following error message:
    "Error during creation of transfer orders for material document 49000XXXX"
    System cannot find source storage bin
    Thanks in advance for the help
    Regard
    Enzo

    your picking strategy does not find the bin where the material is.
    So you need to check what value you have entered for picking in WM view of material master.
    then you have to check where your material is (storage type and bin)
    then you need to check customizing to where what storage types are included in the picking strategy that is tight to the material master entry.

  • Error during creation of transfer orders for mateRIA

    hi gurus,
    I am getting an error while moving material from sl0c2 to sloc1 which is connected to wh by mvmt 321. the document is getting posted and the stock is coming to sloc1,but the error is
    "Error during creation of transfer orders for mateRIAL.how to correct the error.
    regards
    murugan

    Hi,
    The material is maintained at the Warehouse level, hence warehouse transactions have to be completed, by creating a transfer order and the confirmation of the same will create a transfer posting from SL1 to SL2 in the system. This is trigerred automatically depending on the sytem configuration.
    Regards,
    raghu

  • Error during creation of info record for pipline material.(Urgent)

    Hi All,
    We are getting the following error during creation of Info record for pipeline material
    " Material XXXXX is not a pipline material"
    we have checked the material master  and found it is a pipeline material.
    Kindly advice on the same.
    Help in any form will be rewarded.
    Best Regards
    Arihanth

    Hi Arahanth,
       The steps u need to check are;
    1) The Material Type ( If standard then it is PIPE or if defined own Material Type check the settings once preferably in special material type a tick at pipeline mandatory)
    2) when u create the info record (ME11) ensure the info category is selected as pipeline.
    Hope its clear to u
    if solved do reward me points
    Regards
    Anil Thai

  • Error during export of xi-objects

    Hi,
    I get an strange error when trying to export objects from the repository and directory using "Transport Using File System". The error says "Error during export".
    First we got the error "Internal error during pvc call: No space left on device" but this error disappeared without any actions from us and there is space left on the server.
    Please help
    Regards
    Claes

    Hi VJ,
    It only says "Error during export".
    /C

  • Error during gen of subscren container for screens [BP sales,shipping data]

    Hi,
    during the intial download from ECC to CRM ,sales,shipping data is not comming with BP.
    i found one solution for this problm through BUSP transaction to genarate subscrenn container for screens.
    I have genarated everything .But it throws error.
    The error message is
    "Client 101 appl.object BUPA screen $00001:Error during subscreen container gener
    Message no. R11520
    Diagnosis
    Errors have occurred during screen generation. The reasons for this could be:
    The maximum length of the screen was exceeded. There may be no more than 199 lines per subscreen container.
    The maximum number of lines for the header-data area was exceeded. There may be no more than 15 lines in the header-data section.
    Procedure
    Check both of these potential sources of errors in the relevant screen, and make the necessary changes."
    Plz anyone help me to solve this problem.
    regards
    geetha.g

    Hi,
    Even i am facing similar problem like this..
    in my case,
    its working in one clinet and its not able to regenerate successfullu in another client.
    its showing the same above error.
    I tried removing the error by running the report  BDT_VCT_CORR_001 and again generating the screens... but it was of no use..
    can any one sugesst me some other points
    with regards,
    Sumanth

  • Error - During Export Grid Data to CSV

    OS: Windows XP
    Detail: Eror Message Pop-Up During Export Grid Data to CSV. Error Message:
    ORA-00972: identifier is too long
    Vendor code 972.

    There is a bug with all export formats if you are exporting without using aliases and you export a long text string (see More export issues/bugs
    This will fail:
    select 'testing query execution on export' from dual
    This will work:
    select 'testing query execution on export' dummy from dual

  • [Error during Export] R3load exited with return code 11

    Hi guys,
    While performing and Unicode Migration, during Export Phase, Migration Monitor returned the following error while exporting a package
    ERROR: 2014-06-01 10:57:44 com.sap.inst.migmon.LoadTask run
    Unloading of 'REGUC' export package is interrupted with R3load error.
    Process '/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error' exited with return code 11.
    For mode details see 'REGUC.log' file.
    Standard error output:
    sapparam: sapargv(argc, argv) has not been called!
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    REGUC.log details:
    (As you see, it does not provide reasons of this error, all messages are informative and alike all other Packages logs)
    /usr/sap/ECP/DVEBMGS00/exe/R3load: START OF LOG: 20140601105052
    /usr/sap/ECP/DVEBMGS00/exe/R3load: sccsid @(#) $Id: //bas/740_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
    /usr/sap/ECP/DVEBMGS00/exe/R3load: version R7.40/V1.8
    Compiled Jul 23 2013 21:30:53
    /usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
    (EXP) INFO: check NameTab widths: Ok.
    (DB) INFO: Export without hintfile
    (RSCP) INFO: UMGCOMCHAR read check, OK.
    (RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
    (RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
    (RSCP) INFO: UMGSETTINGS nametab creation: ok.
    (RSCP) INFO: Global fallback code page = 1160
    (RSCP) INFO: Common character set is  not  7-bit-ASCII
    (RSCP) INFO: Collision resolution method is 'fine'
    (RSCP) INFO: R3trans code pages = Normal
    (RSCP) INFO: EXPORT TO ... code pages = Normal
    (RSCP) INFO: Check for invalid language keys: activated
    (RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
    (RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
    (RSCP) INFO: I18N_NAMETAB_ALT_ALLOW  = 10000
    (RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
    (RSCP) INFO: I18N_NAMETAB_OLD_ALLOW  = 0
    (RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
    (RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
    (RSCP) INFO: "REGUC001.xml" created.
    (GSI) INFO: dbname   = "ECP20030615080638
    (GSI) INFO: vname    = "ORACLE "
    (GSI) INFO: hostname = "ecp "
    (GSI) INFO: sysname  = "SunOS"
    (GSI) INFO: nodename = "ecp"
    (GSI) INFO: release  = "5.10"
    (GSI) INFO: version  = "Generic_142900-13"
    (GSI) INFO: machine  = "sun4u"
    Tried to find what does R3load Return Code 11 means, but I couldnt find further information on this.
    Any hint of what is causing this error?
    (Please disregard any Filesystem issues since all of them have available space)
    Best!

    After using latest R3load patch, it provides furher information on the log file.
    -------------------- Start of patch information ------------------------
    patchinfo (patches.h): (0.070) R3ldctl: fix CDS views creation in upgrade export mode (note 2
    017805)
    DBSL patchinfo (patches.h): (0.022) Smaller corrections in release 7.40 (th, dp, vmc, dpmon)
    (note 1821404)
    --------------------- End of patch information -------------------------
    process id 27326
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
    (EXP) INFO: check NameTab widths: Ok.
    (DB) INFO: Export without hintfile
    (RSCP) INFO: UMGCOMCHAR read check, OK.
    (RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
    (RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
    (RSCP) INFO: UMGSETTINGS nametab creation: ok.
    (RSCP) INFO: Global fallback code page = 1160
    (RSCP) INFO: Common character set is  not  7-bit-ASCII
    (RSCP) INFO: Collision resolution method is 'fine'
    (RSCP) INFO: R3trans code pages = Normal
    (RSCP) INFO: EXPORT TO ... code pages = Normal
    (RSCP) INFO: Check for invalid language keys: activated
    (RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
    (RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
    (RSCP) INFO: I18N_NAMETAB_ALT_ALLOW  = 10000
    (RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
    (RSCP) INFO: I18N_NAMETAB_OLD_ALLOW  = 0
    (RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
    (RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
    (RSCP) INFO: "REGUC003.xml" created.
    (GSI) INFO: dbname   = "ECP20030615080638
    (GSI) INFO: vname    = "ORACLE                          "
    (GSI) INFO: hostname = "ecp                                                             "
    (GSI) INFO: sysname  = "SunOS"
    (GSI) INFO: nodename = "ecp"
    (GSI) INFO: release  = "5.10"
    (GSI) INFO: version  = "Generic_142900-13"
    (GSI) INFO: machine  = "sun4u"
    (GSI) INFO: instno   = "6120023288"
    (RTF) ########## WARNING ###########
            Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
    (RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: cannot find version token "ver:" at line 1
    (RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: unknown file format, assuming version 2
    (EXP) INFO: table REGUC will be exported with sorting (task modifier)
    ------------------ C-STACK ----------------------
    [0] t_splay ( 0x1020df850, 0xb3, 0x4386, 0x100a02078, 0x0, 0x1020df870 ), at 0xffffffff7b9629
    94
    [1] t_delete ( 0x1020df850, 0x4348, 0x1d9870, 0x1000d0408, 0xffffffff7bb3c000, 0x0 ), at 0xff
    ffffff7b9627e4
    [2] realfree ( 0x101ee7590, 0x1f82b1, 0x1d9cd0, 0x1f82b0, 0xffffffff7bb3c000, 0x101ee7590 ),
    at 0xffffffff7b9623b0
    [3] _malloc_unlocked ( 0x7d40, 0x200000, 0x101edf840, 0x0, 0x101ee7580, 0x0 ), at 0xffffffff7
    b961eb4
    [4] malloc ( 0x7d39, 0x2388, 0x1da428, 0x10038fe84, 0xffffffff7bb3c000, 0x2000 ), at 0xffffff
    ff7b961c28
    [5] rstg_get ( 0x2, 0x0, 0x2, 0x7d10, 0x0, 0x10077d8c0 ), at 0x10038ff4c
    [6] c3_uc_new_cache ( 0x100a02078, 0x284db0, 0x284c00, 0x10077d8c0, 0x100a02108, 0xb3 ), at 0
    x1000d1ce8
    [7] c3_uc_seek_cache ( 0xb3, 0xff79, 0xffffffff7ffcae3e, 0x100a02078, 0x10189fa48, 0x10077d8c
    0 ), at 0x1000d188c
    [8] c3_uc_new_tabcache ( 0x0, 0xb3, 0x4386, 0x100a02078, 0xb3, 0x10077d8c0 ), at 0x1000d13fc
    [9] c3_uc_insert_record_in_cache ( 0xffffffff7ffcb04e, 0x10189fa48, 0x100a02078, 0x100a024c8,
    0xb3, 0x1058c8f84 ), at 0x1000d0408
    [10] c3_uc_insert ( 0x0, 0x100a02078, 0x0, 0x0, 0x10077d8c0, 0xffffffff7ffcb04e ), at 0x1000c
    f944
    [11] c3_uc_convert_table_entry ( 0x1015c61f8, 0x0, 0x100a02078, 0x0, 0x10189f408, 0x31a000 ),
    at 0x1000ce314
    [12] c3_uc_convert_logic_table ( 0x1015c61f8, 0x100a02078, 0x0, 0x4a, 0x100638dc0, 0x10077d8c
    0 ), at 0x1000cdb18
    [13] c3_uc_convert_cluster_data ( 0x100a02078, 0xffffffff7ffcbc50, 0x1015c6428, 0x1015c61f8,
    0x10077d8c0, 0x0 ), at 0x1000cd10c
    [14] c3_uc_convert_cluster_item ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x1038
    6f6e0, 0xffffffff7ffcbb8c, 0x100a02812 ), at 0x1000be1d4
    [15] process_task ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x100a02810, 0x10063
    32e0, 0x10077d8c0 ), at 0x1000b2f58
    [16] CnvCluster ( 0x1014642d0, 0x100954670, 0x100aa9610, 0x2849b8, 0x284800, 0x6cb978 ), at 0
    x1000b1f8c
    [17] cnv_clust2 ( 0x100aa9580, 0xffffffff7ffcc258, 0x100954770, 0xfc0, 0x107d00, 0x100954670
    ), at 0x100062714
    [18] cnv_cp ( 0x100aa9580, 0xffffffff7ffcc258, 0x100aa95e0, 0x0, 0x10077d8c0, 0x1d6c00 ), at
    0x100064644
    [19] process_buffer ( 0x100aa9580, 0xffffffff7ffcc258, 0xfff00, 0x100a97bd0, 0x10, 0x100aa95b
    0 ), at 0x10007162c
    [20] execute_table_unload ( 0xffffffff7ffed610, 0xffffffff7ffdc4b0, 0x0, 0x100aa9580, 0xfffff
    fff7ffcc258, 0x10077d8c0 ), at 0x10006c488
    [21] export_table_task ( 0xffffffff7ffed610, 0x0, 0xffffffff7ffdc368, 0xffffffff7ffcc330, 0xf
    fffffff7ffeedb8, 0xffffffff7ffeec60 ), at 0x10006c934
    [22] db_unload ( 0x100a97b0d, 0xffffffff7ffed610, 0x0, 0x10077d8c0, 0xffffffff7ffeec60, 0xfff
    fffff7bb47540 ), at 0x10006d148
    [23] main_r3ldmain ( 0x72ec00, 0xffffffff7ffff448, 0xffffffff7ffff228, 0xffffffff7bb47540, 0x
    1005fc290, 0x0 ), at 0x1000514e0

  • Error during export & import of rules in RAR 5.2

    Hi all,
    We followed the steps mentioned in exporting & importing the rules as per the Config guide. But we
    are receiving the below error during the import of rules. Can anybody please throw a limelight on why this error message is appearing?
    "Error in Table Data ==> VIRSA_CC_CRPROF
    SQL==>Insert into VIRSA_CC_CRPROF(VSYSKEY,PROFILE,RULESETID,RISKLEVEL,STATUS)Values(??????)
    Record==>D VIRSA_CC_CRPROF null"
    We also ensured that the downloaded file is not truncated and saved it in a separate folder. Does the file needs to saved in ANSI or Unicode text? We saved in ANSI
    Also the background ground job is not getting scheduled automatically during the import of ruels. Is that due to the above error?
    Thanks and Best Regards,
    Srihari.K

    Hello Sri,
    background job for generating the rules won`t be scheduled before you upload the file successfully.
    The most obvious reason for this error message is that you have line in your file - in table VIRSA_CC_CRPROF that is corrupted. Make sure all lines from table VIRSA_CC_CRPROF have all predefined fields - (VSYSKEY,PROFILE,RULESETID,RISKLEVEL,STATUS).
    If you keep hiting this problem just delete this table, after the upload you`ll add the critical profiles manually - I bet you don`t have many of them.
    Also from my experience I always choose to save the downloaded file in UNICODE UTF-8 format.
    Once the file is saved in other format, there`s no use of it, download it again and save directly in Unicode.
    Make sure you don`t have empty fields, even in the fields where you don`t have values, you must leave space, otherwise you`ll keep hitting the same issue.
    Regards,
    Iliya

  • Essbase Version 11 Error During Export

    Hi,
    I have just installed Hyperion Essbase version 11 on windows 2003 Server, It’s a fresh install on new machine. I am getting following error during nightly backup.
    After "Calc All" we export data to the following location. Hyperion\APP\DB. Same Maxl script works fine on version 7 of Essbase. If i export data manually its works fine, only issue i have during nightly back (Automated). Data size is 1.4 GB; Please let me know if you need some more information.
    Error.. *ERROR - 1005000 - Ascii Backup: Failed to open [\PLAN\TEST\TEST_Export_AllData_1.txt]..*
    Maxl Script:
    MAXL> export database "PLAN"."TEST" all data to data_file
    2>      "'\\PLAN\\TEST\\TEST_Export_AllData_1.txt'",
    3>      "'\\PLAN\\TEST\\TEST_Export_AllData_2.txt'";
    Error:
    OK/INFO - 1019020 - Writing Free Space Information For Database [TEST].
    OK/INFO - 1005029 - Parallel export enabled: Number of export threads [2].
    *ERROR - 1005000 - Ascii Backup: Failed to open [\PLAN\TEST\TEST_Export_AllData_1.txt]..*
    MaxL Shell completed with error
    Thank you,
    T.Khan

    I tried with other path and it works. I really appreciate all your help. I used following maxl
    export database "Plan"."Test" all data to data_file
    C:\Hyperion\products\Essbase\EssbaseServer\app\PLAN\TEST\Export_AllDtata_1.txt,
    C:\Hyperion\products\Essbase\EssbaseServer\app\PLAN\TEST\Export_AllDtata_2.txt;
    What changes I need to make on my maxl. Do I need to make any changes on Variables? Here is my current Maxl
    /*      Export Database                              */
    /* Environment Variables: (set by calling script)               */
    /* $ess_UserName      - Essbase username                     */
    /* $ess_Password     - Essbase password                    */
    /* $ess_Server          - Essbase server                    */
    /* Local variables: (set by MaxL script)                    */
    /* $APP               - Essbase application ($1 positional parameter)     */
    /* $DB               - Essbase database ($2 positional parameter)     */
    /* Any error returned from a MaxL command causes the               */
    /* logic to branch to an error exit at end of the script           */
    /* set local variables to values of positional parameters */
    set APP=$1;
    set DB=$2;
    /* Login to Essbase */
    login $ess_UserName $ess_Password on $ess_Server;
    /* Export database in parallel to the database directory - all data */
    export database "$APP"."$DB" all data to data_file
         "'\\$APP\\$DB\\$(DB)_Export_AllData_1.txt'",
         "'\\$APP\\$DB\\$(DB)_Export_AllData_2.txt'";
    iferror 'ERROREXIT';          
    /* Normal Exit */
    Thank You
    T.Khan

  • Error while exporting data into Excel Sheet

    Hi All,
    I have created a VO which is based on Query(Not based on EO) and the Query is as follows:
    select f.user_name ,
    f.description ,
    a.currency_code,
    a.amount_to ,
    a.amount_from
    from seacds.ar_approval_user_limits_nv a , seacds.fnd_user_nv f
    where f.user_id = a.user_id
    and a.document_type = 'CM'
    order by 2;
    Based on this VO I have created a search page which will search and returns data from the table and finally standard export button will export the data into excel sheet.
    In this am searching the data based on above 5 attributes. Without entering anything in the messageTextInput if i am clicking GO button, it is returning all the data into the table region. After this if i click on Export Button, data are getting exported into Excel Sheet. It is fine.
    But if i am searching the data by entering any value in any of the messageTextInput, it is returning data. But if i am clicking the Export Button then it is throwing the following error:
    Exception Details.
    oracle.apps.fnd.framework.OAException: oracle.jbo.SQLStmtException: JBO-27122: SQL error during statement preparation. Statement: SELECT * FROM (select f.user_name ,
    f.description ,
    a.currency_code,
    a.amount_to ,
    a.amount_from
    from seacds.ar_approval_user_limits_nv a , seacds.fnd_user_nv f
    where f.user_id = a.user_id
    and a.document_type = 'CM'
    order by 2) QRSLT WHERE (( UPPER(CURRENCY_CODE) like UPPER(:1) AND (CURRENCY_CODE like :2 OR CURRENCY_CODE like :3 OR CURRENCY_CODE like :4 OR CURRENCY_CODE like :5))) ORDER BY DESCRIPTION asc
         at oracle.apps.fnd.framework.OAException.wrapperException(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at OA.jspService(_OA.java:71)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
         at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    ## Detail 0 ##
    java.sql.SQLException: Invalid column type
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:175)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:240)
         at oracle.jdbc.driver.OraclePreparedStatement.setObjectCritical(OraclePreparedStatement.java:7895)
         at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:7572)
         at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:8183)
         at oracle.jdbc.driver.OraclePreparedStatement.setObjectAtName(OraclePreparedStatement.java:8206)
    Kindly give me any idea to clear this error.
    Thanks and Regards,
    Myvizhi

    Hi Myvizhi ,
    Did you try running the query from back end that got generated in the error trace ? see if that query is returning desired
    output .
    Also would like to know if you are using oracle standard search mode i.e result based search / auto customization search ?
    --Keerthi                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

Maybe you are looking for

  • Why do i pay so much not to not be able to use my phone

    I live in the country several miles outside of the range of a cell phone tower. So what i cant figure out is why do i need to pay $250 for a network extender when i pay verizon $110/month for a phone i cant use at my house? Im eligible for an upgrade

  • Db link failure

    i received following error by issuing query from Form Builder 6i e.g select count(WIP_ENTITY_NAME) INTO V_COUNT from [email protected] Compiling PRE-INSERT trigger on PPC_JOB data block... Compilation error on PRE-INSERT trigger on PPC_JOB data block

  • White line on imac screan

    I have a whitee line come up across part of my screan happened once before got talked through it need it a second time please   Chris

  • Need script for GREP

    Hi, We are using four GREP codes which are applied using paragraph style. We are using CS4. I need a script which i want to apply the GREP code in all para styles automaticaly using javascript. Please help us.

  • Partition between server not in the same DMZ

    Does anyone have feedbackabout using partition between differentserver in different DMZ ?