Error during hyperbuild - "cannot find the file 'namake' (or one of its components. Make sure the path and filename are correct and all required libraries are available."

I have just installed v6.3 for Windows and am trying to run a hyperbuild simulation of a legacy (v6.2 UNIX) model. I suspect that I don't have everything configured right (path to C compiler???) I get the error message "can't find 'nmake'" during simulation.
Help!

Sorry I wasn't being very clear either. I was assuming that you were trying to follow option 2 from Joe D's post on 3-24-2004. Once you know what environment variables have changed you can go the control panel to set them. Some of them will may be new variables that you will need to define. Others may already exists in which case you want to append to them.
The other option is as Joe D said, which is to run VCVARS32.bat before you start Xmath. You could even make a batch file such that instead of starting xmath.bat directly you call your own batch file (.bat). This batch file would have two lines. One to run VCVARS32.bat and the second to run XMATH.bat. If you are not familiar with batch files there are a lot of resources on the web about them. In this case all you would need is:
<path to vcvars32.bat>\vcvars32.bat
"C:\Program Files\National Instruments\MATRIXx\bin\xmath.bat" -v 71.6
The -v 71.6 is optional. it specifies to specifically open version 7.1.6. If you leave it off the newest version will be opened.
Carl L
National Instruments

Similar Messages

TS1368 The error is saying - make sure your computer date is set correctly and that it accepts cookies from the itunes stores

The error is saying - make sure your computer date is set correctly and that it accepts cookies from the itunes stores. I made sure safari can accept cookies and computer date is set. I have 10.5.8 with Itunes 8

Hello Melzy21,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Best of luck,
Mario

When i try to restore my ipod touch 4g itunes keep telling me that to make sure that my network setting is correct,and make sure that i connected to the internet ?

when i try to restore my ipod touch 4g itunes keep telling me that to make sure that my network setting is correct,and make sure that i connected to the internet,wht is that supose to mean i allredy connected to the inter net but i dont know how to make sure that my network sitting is correct help me plz

Try:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

TS2972 when i ask for Authorizeed computer i got the message " make sure your computer' date is set correctly and that it accepts cookies from the itunes stores " how can i solve this problem please .

when i ask for Authorizeed computer i got the message " make sure your computer' date is set correctly and that it accepts cookies from the itunes stores " how can i solve this problem please .

Ok, so I just worked out that itunes communicates through your browser so it's a cookie in the browser not PC direct that fixes this. Bit of a convoluted route but for me it was IE>Internet setting>privacy>sites, then allow all activity from apple.com/itunes.

TS1459 Make sure your computers date is set correctly and that it accepts cookies from the itunes store

Make sure your computers date is set correctly and that it accepts cookies from the itunes store

I have not seen an answer to this....but I am having the same trouble.
ANd tes, the date is set correctly and cookies are on.

Error: cannot find bundle file or key for resource type

Hello,
Please help in finding out the cause & resolving the below errors.
Logs from the default trace:
Error Log Message: cannot find bundle file or key for resource type http://sap.com/xmlns/ciphotocomp, use fallback
Error Location: com.sapportals.wcm.service.resourceTypeRegistry.ResourceType.getDescription( Locale )
Thanks & Regards
Maha,

<< Do not post the same question across a number of forums >>

I am trying to download the newer version of itunes and my computer keeps saying it cannot find bonjour file. It also will not let me remove either bonjour or itunes?

I am trying to download the newest version of itunes and my computer says that it cannot find bonjour file? it will also not let me remove the existing bonjour or itunes program? any help?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

HP DESKJET INK ADVANT K209a-z, extraction fialed : error message "0 cannot open output file"

D/Sir,
I have extracted hp deskjet int advant k209a-z driver using 7zip.
I was getting the error "Extraction Failed: Cannot Open Output File".
On extract with 7-zip, I get the message:
0 can not open output file "<folders>/Autorun.inf"
I am on business laptop with Windows XP but tried with Admininstrator login as well.
Please help me. How to extract it sucessfully?

That type of error message may be indicative of a bad file. Did you download it on the web? If so, try again, but do not use a download manager or program to do it, those can occasionally cause problems with compressed files.
It could be possible, also, that some sort of security program on your laptop is blocking the extraction process. If that is the case you should be able to find some error in the Windows event viewer through the control panel.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

What files need to be backed up to make sure film project is safe?

Editing a feature film using Premiere Pro, Audition, Speedgrade, and possibly After Effects? My question is what files do I need to backup to make sure the film project is safe in the event that the computer and hard drive both break. Editing on a computer, with footage stored on external hard drive. Will use a separate 2nd hard drive for the files to be backed up.
I know I need to backup the .pproj Premiere pro files backed up. I know I need to backup the footage shot (both video and audio files) backed up. I recently learned that I need to backup the files created by Audition, when I send an audio clip from Premiere to Audition and back to Premiere for audio editing.
So my question is this: what other files need to be backed up? If I round trip to from Premiere to Speedgrade and back to Premiere, is there a file created that I need to back up? If I do a round trip from Premiere to After Effects and back to Premiere is there a file that needs to be backed up? Are there any other files that need to be backed up?
My goal - back up all files needed, so if I need to resurrect the project after computer and hard drive break, that I will have all files necessary to continue editing, and that no footage, or edits, or color corrections, or audio edits will be lost at all.
Thanks in advance.

Hey there Matt, nice to "see" you here too!
I can answer one question directly: when round-tripping PrPro/Sg/PrPro, the only place Sg files "changes" is back in the PrPro project file. Essentially, its designed to function much like perhaps a plug-in "within" PrPro. So that part is one of the nifty things of the Direct-Link PrPro/Sg. Now something I'm curious about in your request is how the other folks with LARGE project back things up whilst working. I know they do not archive the previews & cache, but ... with a large project ... can/does it save time to backup those files also when you do get a crash/corrouption. Is it faster to get back working if you backup the cache/previews?
You note wondering where to store the outputs of Audition work-sessions. I put them in the "main" projects folder-tree. I know others feel this is "content" and put them in with the video/graphics folder-tree. I started doing it this way, but now ... wonder if the other is "cleaner" though the difference may be more of intellectual curiosity than having any actual affect on diddly. Note, as I've got separate discs for each part of vid work ... programs/system, cache & previews, projects, footage/graphics, renders ... that does influence having separate folder-trees per project on separate drives. If the project & content files are all on one drive, well ... that's simpler to backup/archive.
Video projects are so space-hogging these days ... "footage" just gets bigger you know! ... and projects more complex. Planning for both in-work backups and continual movement of material from project inception to archiving it off the "working" station is a must, as you are clearly aware. There are many different layouts folks have chosen or simply need to use for their workstation disc layout. This can have some effect on project "stage" planning also.
For those with a "hot" workstation with say a 4/5 disc RAID system for projects/footage/previews/cache so everything is on one big "system", I suspect everything can just live in appropriate folders under a project name to begin with. Backups and Archiving is pretty simple ... use a good backup program to copy & CHECK the the project master folders with sub-folders to your backup/Archive option/s, then delete off the working system (when Archiving).
And as noted here, there, and elsewhere ... putting all the "project" files & their assorted bits & pieces in one main folder per project, and then all footage/graphics/etc. "content" material in a joint folder-tree on the drive *that* lives on for working purposes make backing up & archiving/storing things much simpler. I've seen all sorts of things done afterwards but the simplest just seems to be collating the "project" files folders and the "assets" (content) files/folders under a general project name folder

HT201272 I purchased the August 2012 edition of Consumer Reports and I get an (Error During Download Cannot start the download because the file is missing or invalid)

I purchased the August 2012 Edition of Consumer Reports and I get (Error During Download Cannot start the download because the file is missing of invalid)

Contact support and see if they cna give you a fresh copy. It's probably with the file..

Bearts Audio Control Pannel will not open. Get error message cannot find startup file

Bearts Audio Control Pannel will not open. Get error message cannot find startup file!
Downloaded and instaled up-date for IDT audio from driver up-date. After installation could no longer oppen Beats Audio Control Pannel. Looked for download to re-install BEATS Audio but cannot find one.
Any suggestions.
Sound works with IDT driver installed.
Pavilion P7-1500Z

Hi,
Try using Recovery Manager to reinstall the IDT HD Audio Driver ( this will also reinstall the Beats Audio interface ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
After the reinstallation has completed, restart the PC.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

GGS WARNING 150 Cannot find executable file './server' in the pump r

Hi,
i setup the golden gate freshly.
I'm seeing the below error in the pump rpt files
2012-11-07 06:52:19 GGS WARNING 150 Cannot find executable file './server'.
And in the extract rpt file
2012-11-07 06:11:26 GGS WARNING Z1-078 No valid default archive log destination directory found for thread 1.
2012-11-07 06:11:26 GGS WARNING Z1-078 No valid default archive log destination directory found for thread 2.
2012-11-07 06:11:26 GGS INFO Z0-016 Default thread stack size: 8388608.
2012-11-07 06:11:27 GGS INFO 112 Recovery initialization completed for target file /oratempshare/ggate/ehrms_trail/eutcp/ext/ea000002, at RBA 1360, CSN 94088686.
2012-11-07 06:11:27 GGS INFO Z0-05M Output file /oratempshare/ggate/ehrms_trail/eutcp/ext/ea is using format RELEASE 10.4.
2012-11-07 06:11:27 GGS WARNING Z1-07J Checkpoint marked as from graceful shutdown, but records found after checkpoint in trail /oratempshare/ggate/ehrms_trail/eutcp/ext/ea. Expected EOF Seqno 0, RBA 0. Found Seqno 2, RBA 1360.
2012-11-07 06:11:27 GGS INFO 224 Rolling over remote file /oratempshare/ggate/ehrms_trail/eutcp/ext/ea000002.
Can any one please suggest me where i went wrong in setting up.
Why my ggate showing unable to find the executable. I am able to see the executable server in the ggate home.

user13095767 wrote:
i setup the golden gate freshly.
I'm seeing the below error in the pump rpt files
2012-11-07 06:52:19 GGS WARNING 150 Cannot find executable file './server'.
Can any one please suggest me where i went wrong in setting up.
Why my ggate showing unable to find the executable. I am able to see the executable server in the ggate home.In addition to Steve's reply, note that the broken installation may actually be on the target system, not the (local) source system. Unable to find "server" may mean that your source GG installation is unable to send remote trails to the target system, because "server" can't be found on the target. When checking the target gg installation, also be sure you've configured your source system to send to the correct mgr port & correct remote host. You might be sending data to an older (perhaps (partially) uninstalled) version of GG.

Error code: 2147778144 Cannot find the QE property.

I have been working to get Coldfusion 8 and Crystal Enterprise 10 to work together. The following were two approaches I knew of to try:
1) using Crystal "unmanaged URL reporting":
a href="AOC_Summary.rpt?prompt0=#variables.Record_Month#&prompt1=#variables.Fiscal_Year#&user0=userid&password0=pswdn">AOC SUMMARY</a>
2) using the Coldfusion <cfreport> tag:
<cfreport report = "AOC_Summary.rpt"
dataSource = "#variables.dsn#"
username = "userid"
password = "pswd">
{AB145_AMTS.REC_MONTH} = 5 and
{AB145_AMTS.FISCAL_YEAR} = 8
</cfreport>
I got the CFREPORT tag to work but was disappointed to find that it only rendered the report in HTML. The reports we have been producing with our current configuration of CF4.5 & CR 8.5 can be saved as PDF's. So I abandoned the Coldfusion <cfreport> tag to see if I could get the Crystal "unmanaged URL reporting" to work. This included me trying to find any documentation anywhere to guide me along with going into Crystal Admin and 'experimenting' to see if there was anything I needed to do there to make the unmanaged URL reporting work.
Management is now telling me that producing the report in HTML is acceptable. I am now trying to set up a demo for management. When I went back into my CF code and uncommented the work I had done with the CFREPORT tag (which had been working at the time I commented it out), I receive the following error code.
CrystalReport Integration Exception.
Error code: 2147778144 Cannot find the QE property.
Error source: Crystal Reports ActiveX Designer
I have tried searching the SAP site to find more information on this error message to no avail.   Any guidance would be greatly appreciated.
Regards,
:)mary
Edited by: Mary Fowler on Aug 21, 2008 7:21 PM

I found my mistake. Used wrong .rpt file. (head drooped, tail between the legs)
Thank you for being here!
:)mary

Error Message= x Cannot find the HTML help browser installed on your system.

Help! I cannot seem to find the solution for the error message I get when trying to generate a layout in Microsoft HTMl Help (Primary Layout). I am using the trial version, but it didn't seem to be an issue for anyone else in my class that was also using the trial version.
The error message states, "Cannot find the HTML help browser installed on your system."
Thank you!

Sounds like a problem with the installation of RoboHelp on those machines. When you install RoboHelp, it installs the necessary files to view a CHM.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

FYI: How to Fix "iTunes Cannot Find Original File" Error

Yesterday morning, I opened iTunes and tried to play a file. I got the old "iTunes cannot find the original file" error. I tried another file. Same thing. I tried restarting iTunes, holding down the shift key, and making sure iTunes knew where my Library file was. Yep. Still no dice. So I came here, and did a search for help. I could not find any definitive answers to this question. So I did a Google search and found the fix in an old Metafilter thread. Given that this problem seems a little common, I thought I'd post my solution here, for anyone who has this issue in the future.
First things first, make sure that it's not just an issue of pointing iTunes to your current library location. Go to your advanced preferences and double-check the library location path. If this doesn't fix it, then it's time to go my route:
1) Open your iTunes folder in windows explorer. Look for a file called "itunes library.xml". Copy that file to your desktop or somewhere else so that it's backed up...in case something goes wrong.
2) Open the original XML file in notepad (right-click, "open with", "notepad").
3) In this XML file, you will see a paragraph of information for every file you have (songs, podcasts, videos, etc.). In each of those paragraphs, there is a file path specifying where the file is supposed to reside. This is how the itunes library.itl file knows where to look. In my case, it should have been "e:/my music/itunes", but instead, it was "e:/my music/itunes/itunes music". The program had created that folder for some reason, and all my files were pointing there.
4) Check a few of the paragraphs and see if they are pointing to your actual music folder. If so, then you have another problem...sorry. If not, then continue on:
5) Go to edit->replace (or control-H). In the "find what" box, enter the incorrect file path (in my case, e:/my music/itunes/itunes music"). In the "replace with" box, enter the correct path of your itunes music folder (in my case, "e:/my music/itunes". Then click "replace all".
If you have a lot of songs, this may take awhile. I have over 25,000 files, so it took at least 18 hours.
6) When it's done, quit notepad and save the XML file. Open iTunes. If it doesn't automatically start updating your library, then try to play a song. If you get the same old error, then quite iTunes, then re-open it, go to the advanced preferences and select the correct file path for the library location. This should fix it.

I am also finding many "ghost file" duplicate files (with the exclamation point "can not locate files" message), after pointing Itunes version 8.2.1.6 to my music folder on a separate, networked hard drive. My understanding is that the "Consolidate Files" feature in Itunes is supposed to properly identify all of the file locations, but it only worked for about 1/5 of our 10,000 plus files before it stopped running. (I've read in other forums that this software is buggy, and gets confused with long song titles, etc.)It also leaves you with duplicate "ghost" files to delete, when the music from the separate drive is "added".
I can not find a file called ituneslibrary.xml to try your suggestion, when I open my Itunes folder. When I do "get info" on the individual music files in Itunes that can't be located, the "where" field = "not available". I have doublechecked the library location in preferences and it is properly pointed to "K:\itunes" which is the correct location.

Error during hyperbuild - "cannot find the file 'namake' (or one of its components. Make sure the path and filename are correct and all required libraries are available."

Similar Messages

Maybe you are looking for