Error in updating to table WRPT

Hi All,
I am trying to update lenght, width and height for Material .
After i save the article and go back "It gives Express Document " which doesnot save the changes ..
When i checked SM31 it gives error" Error in updating to table WRPT"
Regards
Vikrant M Kelkar

Still not sorted

Similar Messages

Error in updating OBNK Table ( Bank Statements and Reconciliations,Manual)

PLease advise ,
Bank Statements and Reconciliations,Manual Reconciliation
Client is receiving the following message:
Error in updating OBNK Table
Edited by: Philip Eller on May 20, 2008 9:03 AM

Hi Darpal Thiarha,
Please kindly refer to note 1132591 and note 1128677 to see if these are relevant to this issue. Upgrading to 2007A PL15 or above may avoid such issues relevant with the error 'Error in updating OBNK Table'.
Regards,
Candice Ren
SAP Business One Forums Team

Error in updating condition table 372

Hello,
While saving Excise Invoice I am facing error 'Error in updating condition table 372'.Could you please solve this probelm?
Thanks in Advance

Dear All,
I done this--by doing some configuration changes.
Normally while doing Exports we are tempted to use the same sales area and accordingly we may give the combination of excise grp+series grp+export type in IMG>>>Logistics General>>>India>>>Business transactions>>>Outgoing excise invoices>>>Maintain default excise groups and series groups.
Once after removing the export type to your sales area combination--system will show this error--and we cannot even post the Excise invoices.(J1IIN)
I tried in my IDES--that with export type(Ex.Export under Bond)--with this assignment--i am able to post my excise invoices.
Once after removing this assignment of export type--again i am getting this error.
Actually i am not even aware why it is happening--almost after two months of struggle--i find this.
(i feel it is in the same way that we cannot even open/See a sales order by deleting sales group which was created&used previously)
i am sharing this because somebody may get a little help with my thread.
Mark this if helpful--there by others can easily find this thread.
Phanikumar

Error during update of Table VBAP (RC= 4, Key= 5096672)

Hello experts,
i am getting error as
Update was terminated
System ID....   Q70
Client.......   999
User.....   HPROLLSD
Transaction..   VA02
Update key...   4EF9258A885201B1E10080000A140014
Generated....   28.12.2011, 18:08:25
Completed....   28.12.2011, 18:08:25
Error Info...   Error during update of Table VBAP (RC= 4, Key= 5096672)
Please help me on this issue.
Regards
Narendra

Hi,
Relevant issue,go through the link it could be help you.
Express document "Update was terminated" received from author
Ram

Error while updating DBDIFFVIEW table

Hi,
When we are doing new entries into the table: DBDIFFVIEW, the error:
" Fill table key for table DBDIFFINFO only up to position 040 only " is coming.
Since updating the table at DB level directly is not advisable, please advise to correct the above error.
Thanks & Regards,
DVRK

Hi All,
The entries are maintained from DB level.
Thanks for the help.
DVRK

BI Administrator Error When Updating Rowcount: table or view does not exist

I am using BI Administrator 11g. After creating a new repository and importing metadata, I brought the Physical model into the BMM layer. When I tried to update the rowcount for the tables in the physical layer, I get:
There was an error while updating row count for "<instance>".."<schema>"."<tablename>"
[nQSError 17011] SQL statement execution failed.
[nQSError 17001] Oracle error code 942, message: ORA-00942: table or view does not exist at OCI call OCIStmtExecute: select count(*) from <tablename>.
I created the connection pool during the import process and the tables were found at that time. But after the import is complete I can never update the row counts. I do have access to all the tables in question via the user account in the connection pool.
Anyone have any ideas?
Thanks,
Ken

You need to check "Require Fully Qualified Name check box in connection pool properties. This is needed when you are using non owner user name for accessing database shemas.

Error while updating JDBD table

Hi all,
Am getting the error at the receiver JDBC CC. I have checked the conceren mapping also . i t is working under test tab.
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SAP_STG_AP_SAP_REF' (structure 'Statement'): com.sybase.jdbc3.jdbc.SybSQLException: Attempt to insert duplicate key row in object 'SAP_STG_AP_SAP_REF' with unique index 'SAP_STG_AP_SAP_REF_IX1'
Any sugestion?
Thanks,
kanan

ya issue is while updating the jdbc table ..duplicate entries are coming...I have check the maping xml also with the same data..I think I need to change the mapping -to remove the duplicate (entry in that field) using some function. Any idea which will be the function?? + please let me know how to find out which field is the error refering to in the jdbc table-- with unique index 'SAP_STG_AP_SAP_REF_IX1'
In my scenario Action is INSERT. At the mapping output, there are some entries (5-6 ACCESS) where all the fields under the ACCESS are similar
kanan

Getting "JTA transaction is not present" error while updating db table.

Hi All,
In one of my BPEL process, In a loop, I am updating value of database column Flag from 0 to 1. It was working fine in dev environment, but failed in Prod with below errors, Can Any one suggest on this.
There is a system exception while performing the BPEL instance, the reason is "JTA transaction is not present or the transaction is not in active state. The current JTA transaction is not present or it is not in active state when processing activity or instance "1020112-BpInv7-BpSeq14.87-2". The reason is The execution of this instance "1020112-BpInv7-BpSeq14.87-2" for process "UpdateOrderReqABCS" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information.. Please consult your administrator regarding this error. ". Please check the error log file for more infromation. Please try to use bpel fault handlers to catch the faults in your bpel process. If this is a system exception, please report this to your system administrator. Administrator could perform manual recovery of the instance from last non-idempotent activity or dehydration point.
OPMN logs:
<2010-05-05 01:56:49,395> <ERROR> <gemptp.collaxa.cube.engine> The execution of this instance "1020112-BpInv7-BpSeq14.87-2" for process "UpdateOrderReqABCS" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information.
The current JTA transaction is not present or it is not in active state when processing activity or instance "1020112-BpInv7-BpSeq14.87-2". The reason is The execution of this instance "1020112-BpInv7-BpSeq14.87-2" for process "UpdateOrderReqABCS" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information..
The current JTA transaction is not present or it is not in active state when processing activity or instance "1020112-BpInv7-BpSeq14.87-2". The reason is The execution of this instance "1020112-BpInv7-BpSeq14.87-2" for process "UpdateOrderReqABCS" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information..
The current JTA transaction is not present or it is not in active state when processing activity or instance "1020112-BpInv7-BpSeq14.87-2". The reason is The execution of this instance "1020112-BpInv7-BpSeq14.87-2" for process "UpdateOrderReqABCS" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information..
Thanks in advance.

I can envisage this happening only in a case where the update is taking a longer time than the value of JTA transaction timeout.
Is this happening for all BPEL instances or some of them get thru succesfully ?
Are you EVER updating that particular row of your table ( before/after) ?
-Shishir

Error while updating crmd_orgman table

i am facing shot dump due to FM CRM_ORGMAN_UPDATE_DU
records to insert
IF NOT it_records_to_insert IS INITIAL.
>>>>    INSERT crmd_orgman FROM TABLE it_records_to_insert.
    IF sy-subrc NE 0.
      MESSAGE a002(crm_order_misc) WITH gc_object_name-orgman.
    ENDIF.
ENDIF.
records to update
IF NOT it_records_to_update IS INITIAL.
    UPDATE crmd_orgman FROM TABLE it_records_to_update.
    IF sy-subrc NE 0.
      MESSAGE a002(crm_order_misc) WITH gc_object_name-orgman.
    ENDIF.
ENDIF.
instad of going to UPDATE program is continuing with INSERT command
due to table is already having record corresponding GUID it is showing error message(sy-subrc = 4)
Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
Exception              CX_SY_OPEN_SQL_DB
as i disguss in OSS note they gave me solution to update kernal
if anyone have idea about this pl help me out.

Please post ABAP-questions in one of the <a href="https://forums.sdn.sap.com/index.jspa#42">ABAP forums</a>.
My small addition to the existing hints: define the work area using LIKE LINE OF, the LIKE keyword is a very nice way of ensuring that data types match. You can reference input parameters, other locally defined variables and more.
DATA: t_ydata TYPE STANDARD TABLE OF ydata,
      l_ydata LIKE LINE OF t_ydata[].

Error while updating spatial table

Hi,
When i try to update a spatial table with the following syntax i get the below error,
UPDATE tab1 SET MP = 1, AT = 3,
RDATE = TO_DATE('30:04:2001:16:04:08', 'DD:MM:YYYY:HH24:MI:SS'),
ODATE = TO_DATE('30:12:1899:00:00:00', 'DD:MM:YYYY:HH24:MI:SS'),
REP = 1
WHERE ID = 7
ERROR at line 1:
ORA-29877: failed in the execution of the ODCIINDEXUPDATE routine
ORA-00600: internal error code, arguments: [kcbgtcr_1], [], [], [], [], [],
Any idea why is this happening??
Thanks
Shiva
null

Hi Dan,
we are using oracle 8.1.6.3 on Solaris 8.
Table description is as follows.
ID NOT NULL NUMBER(10)
ROUTE_NUMBER NOT NULL VARCHAR2(255)
MP NUMBER(8,3)
GEOM MDSYS.SDO_GEOMETRY
AT NUMBER(10)
RDATE DATE
CDATE DATE
ODATE DATE
REPORT NUMBER(10)
CLEAR NUMBER(10)
OFFER NUMBER(10)
X NUMBER(8,6)
Y NUMBER(8,6)
This table has a valid entry in the user_sdo_geom_metadata table. And the spatial index is valid.
Thanks
Shiva

Error while updating lookup table through PSI

Hi,
I am trying to update a lookuptable through PSI using following code :
$lookupTableGuid = $svcPSProxy.ReadLookupTables($EPMTYString, 0 , 1033).LookupTables | where {$_.LT_NAME -eq $Lookuptablename}
$lookuptable = $svcPSProxy.ReadLookupTablesbyUids($lookupTableGuid.LT_UID, 1 , 1033)
$lookuptablerowValues = $svcPSProxy.ReadLookupTablesbyUids($lookupTableGuid.LT_UID, 0 , 1033).LookupTableTrees
#get lookup table count
$lookuptableValues = $svcPSProxy.ReadLookupTablesbyUids($lookupTableGuid.LT_UID, 0 , 1033).LookupTableTrees
$count = $lookuptableValues.Count +1
#Insert the rows of table in Lookup Table
foreach ($rows in $table)
$value_Code = $rows.Item("Project_code")
$value_Name = $rows.Item("project_desc")
$GUID = [System.Guid]::NewGuid()
$LookupRow = $lookuptable.LookupTableTrees.NewLookupTableTreesRow()
$LookupRow.LT_STRUCT_UID = $GUID
$LookupRow.LT_UID = $lookupTableGuid.LT_UID
$LookupRow.LT_VALUE_TEXT = $value_Code
$LookupRow.LT_VALUE_DESC = $value_Name
$LookupRow.LT_VALUE_SORT_INDEX = ($count ++)
$lookuptable.LookupTableTrees.AddLookupTableTreesRow($LookupRow)
$error.clear()
#Exceptions Handling :
Try
$svcPSProxy.UpdateLookupTables($lookuptable , 0 , 1 , 1033)
Catch
write-host "Error updating the Lookup table, see the error below:" -ForeGroundColor Red -BackGroundColor White
write-host "$error" -ForeGroundColor Red
Initially, I tried to run with value of $value_code as "AACL", the code worked.
But when I tried to insert value of code as "AACL - ALKYL AMINES CHEMICALS LIMITED"
I got following error:
Exception calling "UpdateLookupTables" with "4" argument(s): "Response is not well-formed XML."
I could not understand why this error is appearing as I just added ' - ' to my code value. I checked for validity of ' - 'in the targeted column. No issue with that.
Please help.
Thanks and regards,
Jayesh

Hi All,
The entries are maintained from DB level.
Thanks for the help.
DVRK

Error when updating xml table

Using IDCS3 I created a master table and exported as xml. Created a working ID file and copied the table over so structure was duplicated with all elements. Deleted some rows I didn't need and made some text changes in the master table.
According to the manual, when merging the tables, the source should ignore elements that are no longer there and update the text in the remaining cells.
Tried to update the xml by updating the link but get an error "Cells too small to split".
I'm new to xml so any advice would be appreciated.
Regards,
Gerry

It appears that ID can't change the cells or rows in a table, although it can change the content. The only solution is to change the table to text and modify the elements that way. The solution removes some flexibility in using tables to manage data.
Regards,
Gerry

Re: Runtime error for updating z table

Hi all,
I have a Z table ZABC with 2 following fields
REC1     type     PERSNO       length    8
+REC2    type       STRING         length   1000     +
In my program I declared an internal table like this
ITAB TYPE TABLE OF ZABC WITH HEADER LINE.
At the end of the program, when I have the new info, I passed them into ITAB, and loop at it to update the Z table
LOOP AT ITAB.
    INSERT ZABC FROM ITAB.
ENDLOOP.
Then I got run time error saying
Runtime Errors         DBIF_RSQL_INVALID_RS
Exceptn                CX_SY_OPEN_SQL_DB
An exception occurred. This exception will be dealt with in more detail
below. The exception, assigned to the class 'CX_SY_OPEN_SQL_DB', was not
caught, which
led to a runtime error. The reason for this exception is:
The maximum length of the long field of the specified table is defined
in the ABAP Dictionary. The current length of the long field corresponds
to the value of the preceding field, which consequently
must be numeric.
In this case, the value in this field was greater than the maximum value
defined for the long field in the ABAP Dictionary.
The term "long field" refers to all fields that are created in the ABAP
Dictionary with the data type STRING, RAWSTRING, LCHR, or LRAW.
The problem is at this position
LOOP AT ITAB.
   INSERT ZABC FROM ITAB.
ENDLOOP.
I know something wrong with the string type but I need to update the whole string structure for the whole record type (rather than updating field by field). need help! thanks!

hi,
the syntax would be as follows:
INSERT ZABC FROM TABLE ITAB ACCEPTING DUPLICATE KEYS.
This will discard the duplicate records & append all the other records from table itab into zabc.
LOOP ....... ENDLOOP statements are not required.
Regards,
Jignesh.

SAP notes for error in update of VBEP table

Hi
while iam trying to delete a PO number it does not get deleted.If you could help me in letting me know if i could implememnt SAP notes in this. I receive a message a inbox stating that error in update of table VBEP.

hi
please check is there any schedule line exists for this PO.

Error Message " Update was Terminated "

Hi,
While changing a sales order using Transaction VA02.
I need to change the pricing order at item level.
After changing the pricing date and recheking the order iam getting the following message " Update was Terminated".
When i double click the message iam getting the following details.
System ID....   KLD
Client.......   400
User.....   BU3821
Transaction..   VA02
Update key...   4B5DE5695CF91768E10000009B7DA705
Generated....   01.02.2010, 07:57:04
Completed....   01.02.2010, 07:57:04
Error Info...   Error during update of Table VBKD (RC= 4, Key= 141018903)
Finally the Pricing Date is not getting updated.
What needs to be done to update the pricing date
Regards,
Bhaskar R.

Hi
A dump has occured while saving the data in table VBKD in a background process.
U can see the dump by the following transaction:
SM13
SM21
ST22
Max

Error in updating to table WRPT

Similar Messages

Maybe you are looking for