Error executing Transaction SM19
Hi All
I want to enable User Audit log. For that I am trying to enable it dynamically using transaction SM19. But when I am running this transaction system takes long time and then sessing terminates giving message Workprocess restarted.. It happens to only this transaction. One of the reason for this as per note 766771 is authorization. But I have SAP_ALL authorization.
what could be problem? Can any body help?
Thanks in advance.
Following is the file
Mon May 29 11:00:30 2006
M ***LOG TZ1=> System time zone found in TTZCU is not valid.
[sign.c 1229]
C
C Mon May 29 11:00:41 2006
C *** ERROR => OCI-call 'OCILobWrite' failed: rc = 1691
[dboci.c 2649]
C *** ERROR => ORA-1691 occurred when writing to a LOB
[dbsloci.c 10713]
C sc_p=04C80E98,no=104,idc_p=04C8FCF0,con=0,act=1,slen=123,smax=256,#vars=5,stmt=1F605C88,table=DYNPLOAD
C prep=0,lit=0,nsql=0,lobret=1,#exec=1,dbcnt=1,upsh_p=04C80EE4,ocistmth_p=1F606A68
C IN : cols=4,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=1,upto=-1,rsize=45,vmax=32,bound=1,iobuf_p=096A7378,vda_p=1F606FB8
C lobs=1,lmax=4,lpcnt=0,larr=1F607408,lcurr_p=00000000,rret=0
C OUT: cols=1,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=0,rsize=0,vmax=32,bound=0,iobuf_p=00000000,vda_p=1F607548
C lobs=1,lmax=4,lpcnt=0,larr=1F6074A8,lcurr_p=00000000,rret=1
C UPDATE "DYNPLOAD" SET "DATA" = :A0 WHERE "PROGNAME" = :A1 AND "DYNPNUMBER" = :A2 AND "TYPE" = :A3 RE\
C TURNING "DATA" INTO :A4;
B ***LOG BY4=> sql error 1691 performing MOD on table DYNPLOAD [dbdynpdb#? @ 510] [dbdynpdb0510 ]
B ***LOG BY0=> ORA-01691: unable to extend lob segment SAPEC6.SYS_LOB0000100582C00004$$ by 1024 in tablespace PSAPEC6640
ORA-27059: skgfrsz: could not reduce file size
OSD-04005: SetFilePointer() failure, unable to read from file
O/S-Error: (OS 112) There is not enough space on the disk.
ORA-27059: skgfrsz: could not reduce file size
OSD-04005: SetFilePointer() failure, unable to read from file
O/S-Error: (OS 112) There is not enough space on the disk.
ORA-27059: skgfrsz: could not reduce file size
OSD-04005: SetFilePointer() failure, unable to read from file
O/S-Error: (OS 112) There is not enough space on the disk.
ORA-27059: skgfrsz: could not reduce file size
OSD-04005: SetFilePointer() failure, unable to read from file
O/S-Error: (OS 112) There is not enough space on the disk.
ORA-27059: skgfrsz: could not reduce file size
OSD-04005: SetFilePointer() failure, unable to read from file
O/S-Error: (O.. [dbdynpdb#? @ 510] [dbdynpdb0510 ]
B *** ERROR => Input values: Table = DYNPLOAD, prog = SAPMSM19 , dynpnr = 0300, langu =
[dbdynpdb2.c 510]
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c0000005) [dpnttool.c 462]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000005 (Access Violation)
App : disp+work.EXE (pid=3556)
When : 5/29/2006 11:0:42.31
Threads : 2
Computer Name : PUNESAP3
User Name : SAPServiceEC6
Number of Processors: 2
Processor Type: x86 Family 15 Model 4 Stepping 1
Windows Version : 5.0 Current Build: 2195
Stack Dump for Thread Id 994
eax=01f9e499 ebx=00000000 ecx=00000000 edx=75202c65 esi=00000001 edi=7c36a42b
eip=73696420 esp=03ff5684 ebp=65687420 iopl=0 nv up ei pl nz na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00010206
function : <nosymbols>
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
03ff5680 4f0a2e6b 322d4152 39353037 6b73203a 73726667 <nosymbols>
65687420 00000000 00000000 00000000 00000000 00000000 <nosymbols>
Stack Dump for Thread Id a64
eax=04009470 ebx=00000103 ecx=04c27598 edx=00000000 esi=00000000 edi=00000000
eip=77f884ff esp=064afeb0 ebp=064afef0 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000246
function : ZwFsControlFile
77f884f4 b848000000 mov eax,0x48
77f884f9 8d542404 lea edx,[esp+0x4] ss:0a4a4053=000c2500
77f884fd cd2e int 2e
77f884ff c22800 ret 0x28
77f88502 8bff mov edi,edi
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
064afef0 0101d972 00000a58 00000000 04c27468 04c27468 ntdll!ZwFsControlFile
064aff80 7c349565 00000000 04c27468 03fffa74 04c27598 disp+work!SigIMsgFunc [signt.c (563)]
064affb4 7c57b388 04c27598 04c27468 03fffa74 04c27598 MSVCR71!endthreadex
064affec 00000000 7c3494f6 04c27598 00000000 00000000 KERNEL32!lstrcmpiW
M -
M
M Mon May 29 11:00:42 2006
M call clean-up function ...
M in_ThErrHandle: 1
M ThSigHandler: signal (step 4, th_errno 11, action 4)
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = 1
M rq_info = 384
M tid = 17
M mode = 0
M len = 8
M rq_id = 3081
M rq_source = 1
M last_tid = 17
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 20
M tab_name = > <
M
M Modeinfo for User T17/M0
M
M tm state = 2
M uid = 19846
M term type = 0x4
M display = 0x8
M cpic_no = 0
M cpic_idx = -1
M usr = >PRABHU <
M terminal = >punesap3 <
M client = >999<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M its_plugin = NO
M allowCreateMode = YES
M blockSoftCanel = NO
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M task_type = ZTTADIA
M th_errno = 11
M rollout_reason = 4
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 4
M roll state = 2
M abap state = 2
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M softcancel = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M tcode = >SM19 <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = NULL
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server punesap3_EC6_00 on host punesap3 (wp 0)
M * ERROR ThSigHandler: signal
M *
M * TIME Mon May 29 11:00:42 2006
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 9780
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M Entering ThSetStatError
M ThIErrHandle: don't try rollback again
M ThIErrHandle: call ThrCoreInfo
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_VMIT_CLEANUP entered.
A ** RABAX: level LEV_RX_VMIT_CLEANUP completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
M ThGetTransId2: got trans id (spa) >B62C8D3948CB41E9B89A8949E30E28A4< (32)
M SosSearchAnchor: search anchor for 17
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
M SosSearchAnchor: search anchor for 4
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
Similar Messages
-
Error executing transaction: org/apache/xpath/XPathAPI
I have imported one transaction from 12.0.5 MII verstion to 12.1 version and got the following error while running. I think this error is related to some java class. Could you please tell me where to pu the jar for solving this error.
In case this error comes due to some other problem please let me know
Transaction Complete.
Error executing transaction: org/apache/xpath/XPathAPIHi,
Now I understood the problem and it is related to the dependency jar files. For running my custom actions I have the
dependency of 2 jar files . One is sqljdbc.jar and second is xalan.jar. sqljdbc.jar I have added in the following way. Can anyone tell me how can I add the xalan.jar in catalog.xml file
<?xml version="1.0" encoding="UTF-8"?>
<ComponentCatalog >
<Category Name="My Functions" Description="My Custom Objects">
<Component Type="Action" Name="XAController12" Description="" Label="XA Controller" ClassName="com.my.xacute.actions.XAController12" AssemblyName="my.jar" Dependencies="sqljdbc.jar"/>
</Category>
</ComponentCatalog>
Thanks
Shaji -
Error while executing transaction in logic editor
Hi all,
When i try to execute a transaction in logic editor in my system i get the following error.
[DEBUG]: Transaction Complete.
[ERROR]: Error executing transaction Status (403):ok
But when i try to exectue the same in a different system,the transaction is sucessfully executed.could anyone help me out with is issue!U better try to clear the cache enteries and try this.it may help
-
Rights Needed to Execute Transactions
When I execute a transaction from the workbench in 12.0 SP3 using a test account, I get the following error:
[ERROR]: Error executing transaction: Could Not Execute Transaction: [TMP6a683fe1-52b8-11dd-a23e-c9339be0c17a] test01 is not assigned to a role that can perform this action.
I assumed the service needed is 'XAcuteRuntime' but the test account is in the 'xMII Users' role and that role is assigned to that service.
Any ideas?
David MacindoeQuite a few helpful suggestions there. In the transaction I'm testing the Reader Role is associated with 'xMII Users' of which my test account is a member. I exported the transaction, deleted the transaction in the Workbench, then looked in the exported transaction on my desktop. It had:
<Name>Metrics_ING_008/ING008_CA</Name>
<Version>323</Version>
<WriterRoles>XMII Administrators,XMII Developers</WriterRoles>
<ReaderRoles>XMII Users</ReaderRoles>
I deleted XMII Users from the transaction's ReaderRoles and re-typed it. I then re-imported back into the Workbench. It still failed.
When I create a transaction in the Workbench, the default roles are:
<WriterRoles>XMII Administrators,XMII Developers</WriterRoles>
<ReaderRoles>XMII Administrators,XMII Developers,XMII Users</ReaderRoles>
I don't think the issue is in the Reader Role because I can open the transaction in the Workbench OK - I just can't execute it. -
I have an package with source , data flow and destination to execute on begin and commit.
in the below i have just used for questioning purpose with diagram removing my Data Flow task explaining my problem
on execution, i get error as
[Execute SQL Task] Error: Executing the query "COMMIT TRAN DimCompanyCode" failed with the following error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION.". Possible failure reasons: Problems with the query, "ResultSet"
property not set correctly, parameters not set correctly, or connection not established correctly.
as mentioned , i have checked the ResultSet, parameters , connection establish.. all are fine.
Kindly advice on what has to be done.
ShanmugaRajTo avoid this error, the RetainSameConnection property should set to 'True' for the Connection Manager - Application_DB.
Narsimha -
Runtime Errors: CONVT_OVERFLOW while executing transaction sm66
Hello Everyone,
There are two Application serevrs out of which I am getting the following error while executing transaction SM66 only in one i.eCI server but if i remote login to other system and try SM66 its working fine.
Please suggest
Runtime Errors CONVT_OVERFLOW
Exception CX_SY_CONVERSION_OVERFLOW
Date and Time 02.04.2011 00:41:01
Short text
Overflow when converting from "2.90113e+09"
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
caught in
procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When attempting to convert the value "2.90113e+09",
an overflow occurred.
There is probably an error in the program
"SAPLTHFB".
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
please use the following search criteria:
"SAPLTHFB" "CONVT_OVERFLOW"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within proedure
"TH_WP_DETAIL_INFO" "(FUNCTION)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
tem environment
SAP-Release 700
Application server... "POSDMCI"
Network address...... ""
Operating system..... "SunOS"
Release.............. "5.10"
Hardware type........ "sun4u"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "POSDMDB"
Database type..... "ORACLE"
Database name..... "BP2"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 21:14:52"
create on........ "SunOS 5.9 Generic_117171-13
Database version. "OCI_101 "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE
SAP database version. 700
Operating system..... "SunOS 5.9, SunOS 5.10"
Memory consumption
Roll.... 16192
EM...... 8379696
Heap.... 0
Page.... 40960
MM Used. 720912
MM Free. 3466336
Information on where terminated
Termination occurred in the ABAP program "SAPLTHFB" - in "TH_WP_DETAIL_INFO".
The main program was "SAPMSM66 ".
In the source code you have the termination point in line 82
of the (Include) program "LTHFBU26".
The termination is caused because exception "CX_SY_CONVERSION_OVERFLOW"
occurred in
procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", but it was neither handled locally
nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPLTHFB "; its source code begins in line
1 of the (Include program "LTHFBU26 ".Hello Everyone,
There are two Application serevrs out of which I am getting the following error while executing transaction SM66 only in one i.eCI server but if i remote login to other system and try SM66 its working fine.
Please suggest
Runtime Errors CONVT_OVERFLOW
Exception CX_SY_CONVERSION_OVERFLOW
Date and Time 02.04.2011 00:41:01
Short text
Overflow when converting from "2.90113e+09"
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
caught in
procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When attempting to convert the value "2.90113e+09",
an overflow occurred.
There is probably an error in the program
"SAPLTHFB".
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
please use the following search criteria:
"SAPLTHFB" "CONVT_OVERFLOW"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within proedure
"TH_WP_DETAIL_INFO" "(FUNCTION)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
tem environment
SAP-Release 700
Application server... "POSDMCI"
Network address...... ""
Operating system..... "SunOS"
Release.............. "5.10"
Hardware type........ "sun4u"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "POSDMDB"
Database type..... "ORACLE"
Database name..... "BP2"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 21:14:52"
create on........ "SunOS 5.9 Generic_117171-13
Database version. "OCI_101 "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE
SAP database version. 700
Operating system..... "SunOS 5.9, SunOS 5.10"
Memory consumption
Roll.... 16192
EM...... 8379696
Heap.... 0
Page.... 40960
MM Used. 720912
MM Free. 3466336
Information on where terminated
Termination occurred in the ABAP program "SAPLTHFB" - in "TH_WP_DETAIL_INFO".
The main program was "SAPMSM66 ".
In the source code you have the termination point in line 82
of the (Include) program "LTHFBU26".
The termination is caused because exception "CX_SY_CONVERSION_OVERFLOW"
occurred in
procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", but it was neither handled locally
nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPLTHFB "; its source code begins in line
1 of the (Include program "LTHFBU26 ". -
Error SG 105 when executing transaction KKAK
Hi,
When executing transaction KKAK (Results Analysis) for month end processing we get the following error for a especific sales order:
"E SG105 Enter rate CAD/USD rate type P for 01/01/2010 in the system settings"
My question will be: why is the system asking to enter that rate which we never use. We use rate M but not P. Is that really necessary?
We are using release 470, level 003, Support Package SAPKH47031.
Thanks for your help.HI,
in the year-depending parameters of the controlling area version definition, the ex.rate type (P) and the valid-from-date is defined, thats why P is used.
Best regards, Christian -
Error in transaction ASKB - Balance in transaction currency
Hi
When i am executing transaction ASKB im getting the error:
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'EUR' with the following details:
Exchange rate '00', amount ' 1,953,936.19' and currency key 'EUR'.
The data in the transaction currency were transferred from the calling application.
System response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Can anybody help me in same.
Thanks and Regards
MeghaHi Chris,
have you checked the last answer from Raja,?
Derived depreciation areas could no handle APC differences unless you activate the indicator "Treat Derived Depreciation Area As Real Area" under the following menu:
SPRO -> Asset Accounting -> Valuation -> Depreciation Areas -> Define Depreciation Areas).
If you set this indicator, then the system posts the real difference. If you would like to apply this indicator you have to complete the account assignment in the configuration, too.
You can switch the derived area from a special reserves area to a "handled as real" area in transaction OADB. There is no other possibility to get the derived area post APC differences, which you definitely have on some assets.
Please also review and apply the following Notes:
759890 Depreciation run ends with error F5 702
1094330 F5 702 with retirement on group asset
1024598 Incorrect values with repeated simulation
Regards Bernhard -
Hi Folks,
In System logs, daily I am encountering the message as "Error in transaction data".
The messages are listed in SM21 in sequence as -
Error processing batch input session PMFMASSIGN
> Queue ID: 07011706105177351507
> Transaction no. 1, block no. 1
> Error in transaction data
On more detailed analysis, after drilling further through each message I found the following message relevant -
Documentation for system log message D2 0 :
Entry relating to an error during the processing of a batch input session. In the batch input session the data for the next transaction is requested. However, the data read is no transaction data. The session has probably been destroyed in the database.
Please explain as why the issue is occuring. I remember some time back, I executed RSBTCDEL2 on Production to clear invalid batch sessions but had to terminate due to long run.
Kindly help me fix this.
Regards,
NickOne interesting discovery I just found in R/3, was this job log with respect to the above process chain:
it says that the job was cancelled in R/3 because the material ledger currencies were changed.
the process chain is for inventory management and the data load process that get cancelled are for the job gets cancelled in the source system:
1. Material Valuation: period ending inventories
2. Material Valuation: prices
The performance assistant says this but I am not sure how far can I work on the R/3 side to rectify this:
Material ledger currencies were changed
Diagnosis
The currencies currently set for the material ledger and the currency types set for valuation area 6205 differ from those set at conversion of the data (production startup).
System Response
The system does not allow you to post transactions after changing the currency settings to ensure consistency.
Procedure
Replace the current settings with the those entered at production
start-up.
If you wish to change the currency settings, you must use programs to convert data from the old to the new currencies.
Inform your system administrator
Anyone knowledgable in this area please give your inputs.
- DB -
Error in transaction code F-04, table T043G
Hi experts,
In executing transaction code F-04, I receive the following error: "Entry for Company XXXX not defined in table T043G"
I have checked table T043G and the company is not listed. What config steps are necessary to correct this?
Thanks for you assistanceHi
That table stands for Customer/Vendor Tolerance
Go SM30 and put V_T043G table and press maintain. Then Copy 0001 and change the Company code & currency - SAVE
Hope your problem will solve
Regards
Tanmoy -
LSMW - Error BDC_INSERT, Transaction code .. is invalid XD01
Dear all.
I have done the following Steps:
1 - Maintain Object Attributes. Chose the Object type Batch Recording, then created a Record using the name (CLI_PMR). And created the Batch record and then assign the fields name.
2 - Maintain Source Structures Created the Struture (CLI_PMR1)
3 - Maintain Source Fields Assign the fields name and length that I used in my program. (CLI_PMR1).
4 - Maintain Structure Relations Assign the Struture (CLI_PMR1 to CLI_PMR)
5 - Maintain Field Mapping and Conversion Rules The normal thing in this point.
6 - Specify Files - Specified the Legacy Data, path for the file.
7 - Generate Read Program Generated the Program.
8 Read Data Executed this Step and every thing is correct
9 - Generate Conversion Program Generated the program
10 - Convert Data Convert data
11 - Display Converted Data Every thing is fine, with no errors
12 - Create Batch Input Session- At this the error message appears Error BDC_INSERT, Transaction code .. is invalid time.
At the time we have created other LSMW programs for this T-Code and every thing is OK.
I'm using the T-CODE=XD01
Best Regards
Pedro Miguel RodriguesHi, I had the same problem in LSMW when generating a batch input for trx IE01. The cause was that there were tab/newline-characters in my text file (some descriptions contained tab-characters). Since I used a tab delimited file, these tabs/newlines in the fields messed up my file.
The excel file contained multiple lines per cell in some description fields. When this was exported to tab delimited text, it contained additional tabs. After checking the contents and removing the tabs/newlines from Excel and performed a new export to txt-file, it was solved.
Best regards,
Jan-Peter Molenaar
SAP EAM Consultant -
Error Executing Database Query (Encountered [nullstring])
The attached code gives the following error message. I did
have nullstrings being submitted as the "notes" and "internal
notes," but I removed them in an (unsuccessful) attempt to solve
this problem. Can this be fixed? Thanks!
quote:
Error Executing Database Query.
Syntax error: Encountered "" at line 9, column 43.
The error occurred in
C:\ColdFusion8\wwwroot\Example\init.cfm: line 6
4 : </head>
5 : <body>
6 : <CFQUERY NAME="init" DATASOURCE="Example">
7 : CREATE TABLE programs(
8 : ID int,
SQLSTATE 42X01
SQL CREATE TABLE programs( ID int, program_ID int, name
varchar(20), long_name varchar(50), creator_email varchar(50),
notes varchar(50), internal_notes varchar(50), is_public bool );
INSERT INTO programs( ID, program_ID, name, long_name,
creator_email, is_public ) VALUES( 0, 1, "Basic", "Basic
(pre-selected)", "[email protected]", true ); SELECT * FROM
programs;
VENDORERRORCODE 30000
DATASOURCE Example
Resources:
* Check the ColdFusion documentation to verify that you are
using the correct syntax.
* Search the Knowledge Base to find a solution to your
problem.
Browser Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US;
rv:1.8.1.6) Gecko/20070725 Firefox/2.0.0.6
Remote Address 127.0.0.1
Referrer
Date/Time 20-Feb-08 11:53 PM
Stack Trace
at
cfinit2ecfm949254281.runPage(C:\ColdFusion8\wwwroot\Example\init.cfm:6)
at
cfinit2ecfm949254281.runPage(C:\ColdFusion8\wwwroot\Example\init.cfm:6)
[ginormous Java stacktrace omitted]I whittled my SQL down to the first query and added the
transaction block, but the error remains. Thanks for your time!
quote:
Error Executing Database Query.
Syntax error: Encountered "" at line 9, column 51.
The error occurred in
C:\ColdFusion8\wwwroot\Example\init.cfm: line 7
5 : <body>
6 : <CFTRANSACTION>
7 : <CFQUERY NAME="init" DATASOURCE="Example">
8 : CREATE TABLE programs(
9 : ID int,
SQLSTATE 42X01
SQL CREATE TABLE programs( ID int, program_ID int, name
varchar(20), long_name varchar(50), creator_email varchar(50),
notes varchar(50), internal_notes varchar(50), is_public bool );
VENDORERRORCODE 20000
DATASOURCE Example
Resources:
* Check the ColdFusion documentation to verify that you are
using the correct syntax.
* Search the Knowledge Base to find a solution to your
problem.
Browser Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US;
rv:1.8.1.6) Gecko/20070725 Firefox/2.0.0.6
Remote Address 127.0.0.1
Referrer
Date/Time 22-Feb-08 10:02 AM
Stack Trace
at
cfinit2ecfm949254281.runPage(C:\ColdFusion8\wwwroot\Example\init.cfm:7)
at
cfinit2ecfm949254281.runPage(C:\ColdFusion8\wwwroot\Example\init.cfm:7) -
Error 131 Transaction rolled back by lock wait timeout
Hello all,
I was trying to run apriori, and then HANA writer in my database.
Apriori executes directly, and then I configure and try to execute HANA Writer. But it keeps executing for more than half an hour, and then gives the following error: Error 131 Transaction rolled back by lock wait timeout. Lock timeout occurs while waiting TABLE_LOCK of mode EXCLUSIVE.
Bimal suggested me to reduce the data to be analysed, so then I reduced it to a pretty small part and executed again.
It gave me the same error after more than 30 minutes waiting executing.
after having this error, I tried just execute apriori, but with a filter of 5 transactions and than it worked. After that I tried to visualize the results, and got the following error:
It means that my HANA memory is full?
I got the view from HANA:
Regards!
Error 131 Transaction rolled back by lock wait timeoutHi Jurgen,
I'm a developper for PAL from Shanghai team.
Could you please provide some details information about this case:
- How many records did you use ?
- What’s the value of “MIN_SUPPORT” and “MIN_CONFIDENCE” did you use ?
The algorithm of apriori will consume much memory when the input data is very large and min_support is low.
So I suggest you set “MIN_SUPPORT” and “MIN_CONFIDENCE” as 0.9 firstly, check if it can output result.
Thanks,
Peng -
Hi,
The following exception occurs, when the workflow was waiting after it has made
a synchronous call to an external system through WTC Interface.
I had read Rob's comments earlier for WLI 6.1 SP1 on this exception that there
would be a fix available for it in the next minor release. For your information,
I had got this exception in WLI 6.1 SP3. Is still EJB Container's timeout excels
the JTA's timeout? Can anybody help me out to find a fix for this problem?
Thanks in Advance,
Regards
Jegadeesan.
The Stack Trace is given below :
<Error marking transaction for rollback: java.lang.IllegalStateException: Cannot
mark the transaction for rollback. xid=4362:5b4c62b47adcc632, status=Rolled back.
[Reason=weblogic.transaction.internal.TimedOutException: Transaction timed out
after 31 seconds
Xid=4362:5b4c62b47adcc632(6932052),Status=Active,numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds
since begin=31,seconds left=30,ServerResourceInfo[weblogic.jdbc.jts.Connection]=(state=ended,assigned=none),SCInfo[ecwli001+admin_ecwli001]=(state=active),properties=({weblogic.jdbc=t3://147.149.116.70:50101}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=admin_ecwli001+147.149.116.70:50101+ecwli001+,
Resources={})],CoordinatorURL=admin_ecwli001+147.149.116.70:50101+ecwli001+)]>
java.lang.IllegalStateException: Cannot mark the transaction for rollback. xid=4362:5b4c62b47adcc632,
status=Rolled back. [Reason=weblogic.transaction.internal.TimedOutException: Transaction
timed out after 31 seconds
Xid=4362:5b4c62b47adcc632(6932052),Status=Active,numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds
since begin=31,seconds left=30,ServerResourceInfo[weblogic.jdbc.jts.Connection]=(state=ended,assigned=none),SCInfo[ecwli001+admin_ecwli001]=(state=active),properties=({weblogic.jdbc=t3://147.149.116.70:50101}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=admin_ecwli001+147.149.116.70:50101+ecwli001+,
Resources={})],CoordinatorURL=admin_ecwli001+147.149.116.70:50101+ecwli001+)]
at weblogic.transaction.internal.TransactionImpl.throwIllegalStateException(TransactionImpl.java:1492)
at weblogic.transaction.internal.TransactionImpl.setRollbackOnly(TransactionImpl.java:466)
at weblogic.ejb20.manager.BaseEJBManager.handleSystemException(BaseEJBManager.java:255)
at weblogic.ejb20.manager.BaseEJBManager.setupTxListener(BaseEJBManager.java:215)
at weblogic.ejb20.manager.StatelessManager.preInvoke(StatelessManager.java:153)
at weblogic.ejb20.internal.BaseEJBObject.preInvoke(BaseEJBObject.java:124)
at weblogic.ejb20.internal.StatelessEJBObject.preInvoke(StatelessEJBObject.java:63)
at com.bea.wlpi.server.principal.WLPIPrincipalBean_u7lmf4_EOImpl.getOrganizationInfo(WLPIPrincipalBean_u7lmf4_EOImpl.java:463)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.getBusinessCalendarProcessor(Unknown
Source)
at com.bea.wlpi.server.workflow.Timer.dateAdd(Unknown Source)
at com.bea.wlpi.server.workflow.action.ActionTimedEvent.getScheduleTimestamp(Unknown
Source)
at com.bea.wlpi.server.workflow.action.ActionTimedEvent.execute(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.executeActions(Unknown
Source)
at com.bea.wlpi.server.workflow.Task.executeActions(Unknown Source)
at com.bea.wlpi.server.workflow.Task.activate(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.activateSuccessors(Unknown
Source)
at com.bea.wlpi.server.workflow.Decision.activate(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.activateSuccessors(Unknown
Source)
at com.bea.wlpi.server.workflow.Decision.activate(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.activateSuccessors(Unknown
Source)
at com.bea.wlpi.server.workflow.Task.markDone(Unknown Source)
at com.bea.wlpi.server.workflow.action.ActionTaskDone.execute(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.executeActions(Unknown
Source)
at com.bea.wlpi.server.workflow.Task.executeActions(Unknown Source)
at com.bea.wlpi.server.workflow.Task.activate(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.activateSuccessors(Unknown
Source)
at com.bea.wlpi.server.workflow.Task.markDone(Unknown Source)
at com.bea.wlpi.server.workflow.action.ActionTaskDone.execute(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.executeActions(Unknown
Source)
at com.bea.wlpi.server.workflow.Task.executeActions(Unknown Source)
at com.bea.wlpi.server.workflow.Task.activate(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.activateSuccessors(Unknown
Source)
at com.bea.wlpi.server.workflow.Task.markDone(Unknown Source)
at com.bea.wlpi.server.workflow.action.ActionTaskDone.execute(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.executeActions(Unknown
Source)
at com.bea.wlpi.server.workflow.Task.executeActions(Unknown Source)
at com.bea.wlpi.server.workflow.Task.activate(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.activateSuccessors(Unknown
Source)
at com.bea.wlpi.server.workflow.Task.markDone(Unknown Source)
at com.bea.wlpi.server.workflow.action.ActionTaskDone.execute(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.executeActions(Unknown
Source)
at com.bea.wlpi.server.workflow.Task.executeActions(Unknown Source)
at com.bea.wlpi.server.workflow.Task.activate(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.activateSuccessors(Unknown
Source)
at com.bea.wlpi.server.workflow.Start.activate(Unknown Source)
at com.bea.wlpi.server.workflow.Workflow.start(Unknown Source)
at com.bea.wlpi.server.workflow.Workflow.instantiate(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean$1.invoke(Unknown
Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.performWithErrorHandling(Unknown
Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.instantiate(Unknown
Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean_h7kt4j_EOImpl.instantiate(WorkflowProcessorBean_h7kt4j_EOImpl.java:692)
at com.bea.wlpi.server.eventprocessor.EventProcessor.checkTrigger(Unknown Source)
at com.bea.wlpi.server.eventprocessor.EventProcessor.onEvent(Unknown Source)
at com.bea.wlpi.server.eventlistener.EventListenerBean.onMessage(Unknown Source)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:262)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:214)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:1865)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:1819)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)You could change the transaction timeout value, but I'd re-examine the
application and see if the transaction times could be reduced some.
29 seconds seems like a long time. -
Bea.jolt.pool.ServiceException: TPETRAN - error starting transaction
I am ctreating the transaction object and try to operate PoolManager.call()
with the transaction object as parameter. The call fails with the following
exception:
bea.jolt.pool.ServiceException: TPETRAN - error starting transaction
at bea.jolt.pool.Connection.call(Connection.java, Compiled Code)
at bea.jolt.pool.SessionPool.call(SessionPool.java:412)
at bea.jolt.pool.SessionPool.call(SessionPool.java:211)
at
mcs.connectjolt.bandetails.BanDetailesDAO.getBanDetailes(BanDetailesDAO.java
:87)
at
mcs.connectjolt.bandetails.BanDetailsBean.getBanDetailes(BanDetailsBean.java
:68)
at
mcs.connectjolt.bandetails.BanDetailsBeanEOImpl.getBanDetailes(BanDetailsBea
nEOImpl.java:105)
at
mcs.connectjolt.bandetails.BanDetailsBeanEOImpl_WLSkel.invoke(BanDetailsBean
EOImpl_WLSkel.java:83)
at
weblogic.rmi.extensions.BasicServerObjectAdapter.invoke(BasicServerObjectAda
pter.java, Compiled Code)
at
weblogic.rmi.extensions.BasicRequestHandler.handleRequest(BasicRequestHandle
r.java:69)
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:1
5)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
Code)
My configuration: WebLogic 5.1, Jolt 1.2, Tuxedo 6.4.I am ctreating the transaction object and try to operate PoolManager.call()
with the transaction object as parameter. The call fails with the following
exception:
bea.jolt.pool.ServiceException: TPETRAN - error starting transaction
at bea.jolt.pool.Connection.call(Connection.java, Compiled Code)
at bea.jolt.pool.SessionPool.call(SessionPool.java:412)
at bea.jolt.pool.SessionPool.call(SessionPool.java:211)
at
mcs.connectjolt.bandetails.BanDetailesDAO.getBanDetailes(BanDetailesDAO.java
:87)
at
mcs.connectjolt.bandetails.BanDetailsBean.getBanDetailes(BanDetailsBean.java
:68)
at
mcs.connectjolt.bandetails.BanDetailsBeanEOImpl.getBanDetailes(BanDetailsBea
nEOImpl.java:105)
at
mcs.connectjolt.bandetails.BanDetailsBeanEOImpl_WLSkel.invoke(BanDetailsBean
EOImpl_WLSkel.java:83)
at
weblogic.rmi.extensions.BasicServerObjectAdapter.invoke(BasicServerObjectAda
pter.java, Compiled Code)
at
weblogic.rmi.extensions.BasicRequestHandler.handleRequest(BasicRequestHandle
r.java:69)
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:1
5)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
Code)
My configuration: WebLogic 5.1, Jolt 1.2, Tuxedo 6.4.
Maybe you are looking for
-
Issue while deploying Agentry application on local SMP server
Hello Experts, I have deployed a customized SAPWM application on the SMP 2.3 server. I am referring to the tutorial maintained at the following URL :http://scn.sap.com/docs/DOC-43353 After deployment, the status of the application is shown as "runnin
-
RCA Extension Cable - Male to Female a make that fits Inspire 5.1 speakers?
Hi I want to extend the distance between my speakers and the subwoofer. I believe I have a Creative Inspre 5200 system. I bought some RCA male female extension cables but the male nad female ends were too long and did not fit either the jack on the e
-
Hi , I have to make report for all employee's attendance details based on this structure as mentioned below for a month or specific duration period. Empcode Empname Empdesig 1stday 2ndday........................ absent
-
Mailing Problem in Reports Writer 3.0 (URGENT)
Hello, I 'm facing mailing problem in Reports Writer 3.0. All Reports files (.rep) are stored on NT Server(in a particular dir) and I have full permission (on that dir). After running the report, when I try to send mail then it gives the following er
-
I heard there was a way to configure ZCM or setup a Proxy server or something to remote manage workstations outside of my firewall that is still secure. I really hope this isnt a myth I heard or overly complex because that would be the nicest feature