Error file share not managed but fabric- provider/fileserver and hyper-v host show managed/responding
Hi,
I am really puzzled by the following situation. I have a SCVMM 2012 R2 cluster that manages a Hyper-V host cluster on windows 2012 r2 and storage attached by SOFS Cluster on windows 2012 r2. There is 1 share - CSV1 for all VMs.
Under Fabric -> Providers/Arrays/FileServer everything is green and has status of responding and CSV1 is shown as managed.
Under Fabric -> Hosts -> Cluster properties -> Fileshare storage the CSV1 is visible and status responding, just as on the hyper-v hosts.
The error I have is that around 50% of those VM have "unsupported VM configuration" and under properties I get the error that the file share that the VHDX is running on is not managed. --> This is wrong because the share IS managed by VMM. As
I said I only have 1 (!) CSV for ALL of my VMs. If the share isn't managed by VMM then none of the VM could show a valid status. But this is what I see.
A refresh on the virtual machine gives me an error of ID12700 "VMM cannot complete the host operations... unkown error (0x8005)." On the Hyper-V Host itself for the time frame that I performed the refresh of the VM there are no corresponding errors.
The only thing I found is that all VMs with unsupported configuration have wrong properties entry in SCVMM. In SCVMM
the VM properties -> Advanced -> Availablity is set to "normal". On all VMs that work just fine the Availability is "High". I went to the Failovercluster Manager on the Hyper-V host. All VMs are visible under "Roles" and
therefor are HA VMs. So for some reason SCVMM has a wrong information on their HA status. I am not sure if this is the reason why
some are showing the error and some not but it is the only difference I found.
Does someone have an idea what could cause this behavior?
Yes all of those VMs were created before VMM exists. A Cluster refresh and hyper-v host refresh runs through without errors or information. So that is OK.
Migration is not possible because of the error. LiveMigration is not available from the GUI. Haven't checked powershell yet but will do so today.
I have been able to limit the errors to a smaller number of VMs (well if you could say that). I removed and re-added the hyper-v cluster. After that about 1/3 of all VMs still show the error and all of them are on the same Hyper-V server. Not sure if this
is relevant or just by "accident". I checked this hyper-v host but in regards to storage, network, hyper-v configuration I do not see any difference to the other two cluster nodes either on hyper-v nor on SCVMM.
Similar Messages
-
My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years
answered in your other thread LR 4 suddenly no longer recognizes files.
-
Error: File could not be opened.
When managing the following and clicking on "Export To Excel", the following error occurs:
"Error: File could not be opened."
The same error occurs when doing the following:
- Trying to export Control Tables
- Trying to export Import Formats
- Trying to export Import Groups
- Trying to export Logic Accounts
- Trying to export Logic Groups
Does anyone please have any suggestions on how to fix this? The odd thing is that these files are actually created and can be opened fine!
The error log is as follows:
** Begin FDM Runtime Error Log Entry [2012-03-27 14:14:25] **
ERROR:
Code............................................. 3002
Description...................................... File could not be opened.
\\xxxxxxx\c$\fdmdata\xxxxxxx\Outbox\ExcelFiles\Periods99008.xlsx
Procedure........................................ clsAppServer.fFileGetStream
Component........................................ upsAppSv
Version.......................................... 1112
Thread........................................... 14368
IDENTIFICATION:
User............................................. xxxxxxx
Computer Name.................................... xxxxxxx
App Name......................................... xxxxxxx
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... xxxxxxx
Database Name.................................... xxxxxxx
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... Sample
Location ID...................................... 748
Location Seg..................................... 2
Category......................................... WLCat
Category ID...................................... 12
Period........................................... Jan - 2012
Period ID........................................ 31/01/2012
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2012-03-27 14:19:30] **
ERROR:
Code............................................. 3002
Description...................................... File could not be opened.
\\xxxxxxx\c$\fdmdata\xxxxxxx\Outbox\ExcelFiles\ImportGroups43950.xlsx
Procedure........................................ clsAppServer.fFileGetStream
Component........................................ upsAppSv
Version.......................................... 1112
Thread........................................... 11884
IDENTIFICATION:
User............................................. xxxxxxx
Computer Name.................................... xxxxxxx
App Name......................................... xxxxxxx
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... xxxxxxx
Database Name.................................... xxxxxxx
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... Sample
Location ID...................................... 748
Location Seg..................................... 2
Category......................................... WLCat
Category ID...................................... 12
Period........................................... Jan - 2012
Period ID........................................ 31/01/2012
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2012-03-27 14:30:20] **
ERROR:
Code............................................. 3002
Description...................................... File could not be opened.
\\xxxxxxx\c$\fdmdata\xxxxxxx\Outbox\ExcelFiles\ImportFields79048.xlsx
Procedure........................................ clsAppServer.fFileGetStream
Component........................................ upsAppSv
Version.......................................... 1112
Thread........................................... 15604
IDENTIFICATION:
User............................................. xxxxxxx
Computer Name.................................... xxxxxxx
App Name......................................... xxxxxxx
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... xxxxxxx
Database Name.................................... xxxxxxx
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... Sample
Location ID...................................... 748
Location Seg..................................... 2
Category......................................... WLCat
Category ID...................................... 12
Period........................................... Jan - 2012
Period ID........................................ 31/01/2012
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2012-03-27 14:32:51] **
ERROR:
Code............................................. 3002
Description...................................... File could not be opened.
\\xxxxxxx\c$\fdmdata\xxxxxxx\Outbox\ExcelFiles\LogicGroups92995.xlsx
Procedure........................................ clsAppServer.fFileGetStream
Component........................................ upsAppSv
Version.......................................... 1112
Thread........................................... 13052
IDENTIFICATION:
User............................................. xxxxxxx
Computer Name.................................... xxxxxxx
App Name......................................... xxxxxxx
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... xxxxxxx
Database Name.................................... xxxxxxx
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... Sample
Location ID...................................... 748
Location Seg..................................... 2
Category......................................... WLCat
Category ID...................................... 12
Period........................................... Jan - 2012
Period ID........................................ 31/01/2012
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2012-03-27 14:33:05] **
ERROR:
Code............................................. 3002
Description...................................... File could not be opened.
\\xxxxxxx\c$\fdmdata\xxxxxxx\Outbox\ExcelFiles\LogicAccounts70086.xlsx
Procedure........................................ clsAppServer.fFileGetStream
Component........................................ upsAppSv
Version.......................................... 1112
Thread........................................... 15980
IDENTIFICATION:
User............................................. xxxxxxx
Computer Name.................................... xxxxxxx
App Name......................................... xxxxxxx
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... xxxxxxx
Database Name.................................... xxxxxxx
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... Sample
Location ID...................................... 748
Location Seg..................................... 2
Category......................................... WLCat
Category ID...................................... 12
Period........................................... Jan - 2012
Period ID........................................ 31/01/2012
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... FalseMany thanks for your suggestions.
- MS Office Excel 2007 SP3 is installed on the server. The Excel files are created and can be opened manually fine on the server (by going to C:\FDMData\Outbox\ExcelFiles). But FDM raises the above error whenever one clicks on the "Export To Excel" button and does nothing more.
- The admins here have apparently now added the C:\Windows\SysWOW64\config\systemprofile\Desktop folder (the FDM app server is 64-bit) but it does not appear to have made a difference. Will the FDM service account need privileges to this location?
- Apparently the FDM service account has privileges to the FDMData\Outbox\ExcelFiles location, but I will double check this... -
PO PDF Error - File does not Begin with '%PDF-'
Hi,
I am working on Implementing PO PDF with XML data and RTF Template. I have created a new template in XML Publisher and followed the following set up steps
Setup / Organizations / Purchasing Options / Control TAB / set 'PO Output Format' = 'PDF'
setup / purchasing / document types / select "Standard Purchase Order" / Set the Document Type Layout to your new template.
When I view the document from PO Summary > inquire > View Document, I get an adobe reader error
'File does not begin with '%PDF-', how ever when I preview it from the template definition, it opens fine.
I tried running PO Output for communication with my custom template but I don't see the parameter 'Purchase Order Layout'. The last parameter in the list is 'Include Blanket'.
Am I missing any set up steps? However when I use the standard Purchase Order Layout in Document Types set up, the Inquire > View Document created a PDF output.
Any help is greatly appreciated.
Thanks,
SharmilaI encountered same error in BPA Invoice Print. I remove a MLS function from the program definition and this error disappeared. Have not fully investigated but maybe this will help. Thanks.
-
How to resolve the error "File could not open" in AL11?
Hi Friends,
When I am going to write a file via DATASET.
But it's showing me a error"File Could not Found"?
And I am unable to check my fiel at AL11.
Please suggest me the solutions.
Regards
RickyHi,
Try this code
TYPES : BEGIN OF ty_emp,
empno(2) TYPE c,
empid(10) TYPE c,
empname(3) TYPE c,
END OF ty_emp.
DATA : it_emp TYPE TABLE OF ty_emp,
wa_emp TYPE ty_emp.
DATA : pbk TYPE string.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : p_file TYPE rlgrap-filename default 'D:\EMP.TXT'.
PARAMETERS : p_asfile TYPE rlgrap-filename default 'EMP'.
SELECTION-SCREEN END OF BLOCK b1.
pbk = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = pbk
FILETYPE = 'ASC'
has_field_separator = ' '
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = it_emp
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
OPEN DATASET p_asfile FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc <> 0.
EXIT.
ENDIF.
LOOP AT it_emp INTO wa_emp.
TRANSFER wa_emp TO p_asfile.
ENDLOOP.
CLOSE DATASET p_asfile.
==============================================
Regards,
Krrishna -
Canon 7D Mark II error "Files are not recognized by the raw format support in Light (149)"?
Has anyone tried to load raw files from a Canon 7D Mark II I get an error "Files are not recognized by the raw format support in Light (149)"?
Based on previous experience, I expect the final versions of LR, ACR and DNGC to be released simultaneously. We have so far seen Release Candidates of ACR and DNGC but not LR.
Unless there needs to be a second ACR/DNGC Release Candidate which happens once every few years for special circumstances, which I don't see any of at the moment. -
I am trying to open a xls file I am getting an error file format not supported
I am trying to open xls file in number but I am getting an error file format not supported
Hi Momomayet,
Try dragging the Excel file to the Numbers icon on the dock.
Or open from within Numbers (Menu > File > Open...)
Regards,
Ian. -
Hi:all
I can't download an app or update ,It says ( the product distribution file could not be verified) in App Store
,and in iTunes says An unknown error occurred (-50) ?
Help Please.See this link from another similar question. It may need patience to resolve. I think Thomas Reed's suggestion is best place to start.
App Store rejects buy of Mountain Lion: Apple Support Communities -
Error "file is not a resource file" after updating to LV2010
Hello everybody,
my problem is that I can't call a c++ dll after updating to LV2010 and Visual Studio 2010. The DLL is written in Visual Studio 2008 and worked perfectly. Now I compiled the dll again because add some new functionality. In the development pc I fixed that problem. I manually replace the call library function nodes and configured it again. I made a installer package from my lv project. This installation don't work with the dll on the target with same error "file is not a resource file". The rest of the application works fine.
Development PC: Win 7 Enterprise 32Bit
Target PC: Win XP Service Pack 3 32BitHi
Verify that all your files have correct extensions and rebuild the.exe file.
I hope this will help
Kind regards, -
I am trying to sync my music from my computer to my iphone 6 but my computer keeps bringing up an error box "computer not authorized" but it is authorized. Please help!
I have a pc and am trying to get my music through my iTunes on my computer. I didn't have any trouble syncing my iphone 5S but can't get it to sync with my 6. OS 8.1.3
I open iTunes on my pc, plug in my phone, then I click on the picture of a phone on the upper left hand corner of my music library. Then I get a box of options with sync at the lower right. I have clicked "automatically sync when phone is plugged in" and have also tried to do it manually by checking specific songs and albums. Every time I hit sync the box pops up that says, "The iPhone could not be synced because this computer is no longer authorized for purchased items that are on this iPhone. To authorize this computer for items purchased from the iTunes store choose Store>Authorize This Computer."
I took those steps and a box pops up that says "this computer is already authorized."
I have my recently purchased music on my phone that came through the cloud when I restored my phone. But I want my old music from CD's that I put on my iTunes library in my computer. I had all of this music on my old phone.
Thank you so much for your time! I'm obviously not very good at this! -
Import error: File is not a valid HTML DB export file
Hi,
This is driving me a bit nuts: I have made a change to a page and want to move it to another HTMLDB environment. I have 3 environments, DEV, TEST and PROD, they are all version 1.6.0.00.87. I export the page from DEV, then when I try and import it into TEST I get an error "File is not a valid HTML DB export file". The file looks OK to me, I have regenerated it several times, I have tried both DOS and UNIX formats, same result. How can I find out the root cause of this issue, I've been able to export/import individual pages without any problems up to now.
Thanks,
SteveThis was tripping me up for a while too. Make sure that the workspace id (1236351 or some such large number) is the same across all environments. You can ensure this by taking a export of the DEV workspace itself from the Admin interface (login to workspace internal) and importing it into TEST and PROD.
Once the workspace id is the same, you can export/import pages between them without a problem.
Thanks -
How do I send files from my IMAC via bluetooth to my new Ipad? They will not "pair" but they are connected and discoverable. I send a file from Imac snow leopard OS X 10.6 to the ipadusing bluetooth, but the failure message says the ipad does not have the necessary services. What are these? Do I neeed to have iphoto and ms word to send pix and .doc files?
File Sharing over Bluetooth is not a feature of iOS devices. iOS does not include the required Bluetooth profiles to allow this. You cannot add this feature, so you may as well stop trying.
-
The .prel files will not load into premiere elements 13 and says that there is a missing codec. This is a school's site llicense that we've used in our lab for more than a month.
GPPNeil
Premiere Elements 13 on Windows 8.1 (assumed 64 bit).
First..
1. Have you updated from 13 to the 13.1 Update using an opened project's Help Menu/Update. If not, please do so.
2. Do the problems exist if you disable the antivirus and firewall(s)?
3. Are you running the program as Administrator? Do you have the latest version of QuickTime installed on your computer?
4. Have you refreshed the Online Services using Premiere Elements Editor Edit Menu/Preferences/Web Sharing?
5. Have you updated the Adobe Application Manager?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
6.Is your video card/graphics card driver version up to date according to the web site of the manufacturer of the card?
7. Lots more we could go through such as deleting the Adobe Premiere Elements Prefs file and, if necessary, the whole
13.0 Folder in which it exists.
But, I think that you have enough things going on here to warrant an uninstall, free ccleaner run through (regular cleaner and registry cleaner parts) and then reinstall with the antivirus and firewall(s) disabled.
CCleaner - PC Optimization and Cleaning - Free Download
If the problems persist after all that then we will adjust to additional troubleshooting maneuvers.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR -
Please help! I have an ipad that I purchased in Australia and my iTunes account is Australian, but when I try and watch Australian TV shows on Australian websites it says that the content is not available because I am not in Australia. How can I fix this?
Are you using a proxy server to access the net?
Or another cause could be that your router thinks it's in its home country (probably china)
I just don't know how to fix it. There's a way but I don't know enough to advise.
You could try googling your router model and 'wrong country' or keywords like that and see if something comes up. -
If my wife and I share our Imac but have separate Iphones and Ipads, can we set up 2 separate Iclouds on the Imac? Or do we have 1 Icloud account and synch our individual devices separately?
Set 2 independent users on the iMac, each can then have their own accounts (iCloud, iTunes etc)
Maybe you are looking for
-
What version of GTK+ included in Solaris 10?
I'm with a team that's evaluating upgrading from Solaris 9 4/04 to Solaris 10. One of the issues that we need to examine is GTK compability between Solaris 9 and Solaris 10. I can't locate any specific reference to the GTK+ version included with JDS
-
MIghty Mouse Scroll Ball Only Works If You Scroll Up
Subject explains it all. Not sure what has changed, but I can scroll up but not down. Any tips?
-
How I can store Image file in a database
Can any one how i can stored image file in a database and then by using same database how i can show in HTML page...(in a browser)
-
Yes, the BPEL PM 2.0.11 just been released. But I don't see it for JBoss under Linux. Am I missing something ?
-
Why does do Apple discussions take forever to load on MBP compared to PC?
I am sitting at a lab computer (PC) and realized that my MBP loads discussions.apple.com super slowly. What's the reason? Is it Safari? Cause I find that Safari loads up pretty quickly, but once in operation, it's pretty slow actually.