Error for IT0442 - Company Cars
Hi All,
While maintaing the Infotype 0442 i.e. Company Cars for the Country Great Britain, m geeting the error " No Constant CACON maintained for Country 08".
Please suggest me what need to be done for this.
Thanks & Regards,
Esha
Hi all
Can anyone please advise how I add a new Subtype to IT0442, I just need to know which table the Vehicle Classification is in, so that I can check if one exists for HIRE CAR, if not which table would I create this in, we want HIRE CAR to be treated the same way as COCAR. We are OK putting the new Vehicle Classification into IT0442 once we're found it (as we've added CVAN already in the past) - but I can't work out how to find out if something exists for HIRE CAR already or how to add it in the first place so that we can then have it available on IT0442 and pulling through to the P11D
Thanks a lot for any help anyone can give me
Cheers
Nyree
Similar Messages
-
FBL3N- Abap error for new company code
Hello Forum,
I have created a new company code and created few GL accounts in My Test system. However when i try to run this report FBL3n it gives a runtime error.
Runtime Errors CALL_FUNCTION_NOT_FOUND
Except. CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time 02/11/2014 11:13:48
Short text
Function module "LINE_ITEMS_GET_GKNOT" not found.
However it works fine with other company codes and report is executable and displaying the values properly.
Any help is apreciatable
Thanks
DavidHello David,
Please go through in the below link which is already answered for your query.
http://scn.sap.com/thread/1859902
Yes, you are correct there is no Function module "LINE_ITEMS_GET_GKNOT" with this name. PFA the screenshot for your easy reference.
This is because of spelling error. Correct FM is LINE_ITEMS_GET_GKONT
Please follow the below given steps to correct the FM Name spelling error.
Go to FIBF ---> Settings tab ---> Choose P/S Modules ----> Of a Customer ---->
Event: 00001650
Product: ZFBLOFF (which has been created in the previous step)
Function Module: LINE_ITEMS_GET_GKONT
Modify GKNOT as GKONT by choosing the correct line entry and then save.
I hope it will resolves.
Thanks & Regards,
Lakshmi S -
Error "Enter section code" while doing revenue recog for Korea company code
Hi
While doing revenue recognition for a sales document using VF44 for Korea company code , i got an error to "enter sectio code".
There is no WHT for the customer, only VAT is entered in the sales price.
How to resolve this issue, Please help.
Thanks,
VaishnaviResolved.
-
Document Splitting error - only for 1 company code (out of 2 company code)
Hii
We have two company codes: 1100 and 1200. Chart of accounts, chart of depreciation, controlling area are same for both the company codes. Only profit centers are different since both company codes are in two different location.
Document splitting is active in both the company code. (I have checked that node also). Also setting in ACSET (i.e. account assignment) is done for the depreciation area
When i am posting asset acquisition (F-90) and MIGO (for assets PO), its giving me error for document splitting. This error is given only for company code 1100 and not for 1200. All other transactions (including FB60) are working properly in both the company codes.
What can be error ? Is there any error in asset master creation or vendor master.
Please help.
I CHECKED IN EXPERT MODE IN SIMULATION. THEIR PROFIT CENTER IS NOT VISIBLE IN ASSET LINE ITEM. PLEASE HELP
Edited by: Deepak Agrawal on Jul 29, 2011 4:02 PMHi,
pls. write completeley which error message you get.
Kind Regards
Tarik -
AddOn for a small Car and Life Insurance company, Policy management
Hi Everybody,
I am looking for an AddOn for a small Car and Life Insurance company.
I am interested in policy management
Do you know if there is any in the market?
ThanksHi,
You need to search SAP Business One Partner Solutions (Add-ons) forum and posted it there if you find none.
Thanks,
Gordon -
Entry Channel setup for multiple company codes
Hello,
I have a question regarding the entry channel setup (for external requirements in the Plan-Driven Procurement scenario)
In previous implementations, I 've created an entry channel below each company code (as the documentation says it should be). Now, for each entry channel, there was a EBP user assigned, which corresponded to an RFC entry in the backend system (I was connecting EBP to multiple backend systems)
Now, what should I do in the following scenario?:
1. SRM is only connected to one backend system
2. There are 50 company codes
Does that mean I have to create 50 users (for each channel) plus 50 RFC connections in the R/3 system (each with a different user in the backend system), pointing to the same SRM system?
I was thinking of creating an Org iD in the SRM structure at the top (which would be the entry channel), assign only ONE user to it and then fill attribute BUK with all the company codes. However, I don't know if this will work, because the external requirement process might need the company code defined in the "Function" tab... =/
Any help would be greatly appreciated.
Regards,
Gilberto.Hi Proyecto Genesis,
I am also configuring the Entry channel (org unit) for multiple company codes.
I tried your logic of defining the entry channel outside company code level. Assigned the BUK attribute and extended attribute for plants and storage locations.
Also in my case the local Pur org and Pur group is defined outside the company code. Is it correct?
However the system fails to transfer the external requisition to SRM.
SLG1 displays following error message.
"No address found for partner function type Ship-To Address"
So if I move the Entry channel (org unit) under any one company code level then the external requisitions are transferred correctly to SRM.
But then the issue is the requirements are not transferred with the backend Pur Org and Pur grp. Instead they are transferred to the Pur Org and Pur grp of the company code under which the entry channel is defined.
Can you please share how do we need to define the entry channel, local pur org and pur grp for multiple company codes scenario, so that the ECC requisitions are transferred with the correct company code, pur org and pur grp to SRM?
Or do we need to define Entry channel for each company code and RFC user actually mapping the same backend system?
Please guide.
Regards,
Sandeep -
While pgi there is date error related to company code?
I created a sales order and transfer order, then trying to post goods issue, I am getting this issue
"Good movement: Error log
Item Material Description Delivery qty UoM Batch
000010 E M7 053 adafdfasd 10 PC
Posting only possible in periods 2002/11 to 2002/10 in company code 1000"
Could anybody tell, where to change to solve this problem?
Fully rewarded.
Thanks,
Manohar.Hello
Follow these steps for the resolution of your query.
<b>Step 1:</b>
Check the t-code 'OMSY'
As to what is the period. also see in controlling are what type period schedule u selected...
In the t-code, select the the year and period for your company as 2007 amd 01.
<b>Step 2:</b>
Next in the using the t-code 'MMPV' close the period for your company by entering the company code and the current date.
Once these are done, you would be good for posting in the current period.
Regards,
Gauravjit.
Reward points if the solution is helpful -
TAX code custmisaion for Overseas Company with local Tax code
Hi Gurus...
I am facing following scenario:
**My company is set ups as overseas company / company code curr / local Curr = overseas Curr, My group currency is local currency / home country curr.
**I like to raise PO for a vendor who is local and supplying goods locally, invoicing in local currency for Overseas company. Goods will be used locally.
I like to know how should I configure this from TAX perspective.
Thanks
Hiren
Edited by: Hiren Mazumdar on Mar 6, 2009 4:04 AMHi
<u>SPRO Path - hope this will help you in customizing </u>
1.
SRM Server -> Cross-Appl Basic settings -> Tax Calculation ->Determine Tax Code for Country/Product Category.
2.
SRM Server -> Cross-Appl Basic settings -> Transaction Tax engine -> Define Tax Settings .
<b>Please go through the links below -></b>
Re: Tax Calculation
Re: Tax code T1 does not exist for jurisdiction code error in shopping basket
BBP_DET_TAXCODE_BADI is not setting the Tax Code ! :-(
Tax code is not changing in back-end
Tax code
Tax code T1 does not exist for jurisdiction code error in shopping basket
Change tax code in SC
Regards
- Atul -
Blue Screen Error for Windows 7 Home Basic 64 Bit
I have a Sony Vaio E Series with WINDOWS 7 64bit home basic preinstalled. It worked perfectly fine for 2 yrs until last month, I needed to replace the hard drive due to bad sectors. Now, after a month of replacing my hard drive fresh from
Sony Center, I decided to do a dual boot (install another OS - Windows 8.1 pro) on a separate partition. Everything is averagely fine. But 2 nights ago, I encounter a blue screen error for WIN 7 (my pre installed one). It happened the second time, so I started
it in safe mode and did a system restore. I don't know if it will prevent future occurence of blue screen, but to make sure, I reinstall my factory default drivers using Vaio CARE... Pls help.
PS: I have not encountered BLUE SCREEN error in Windows 8.1 yet. Is it OS specific? Here's the error the second time, it happened on my Windows 7:
Blue screen error for Windows 7 home basic
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.2
Locale ID: 13321
Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF80002EE6B80
BCP3: FFFFF880035F4DC8
BCP4: FFFFF880035F4620
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\083014-31964-01.dmp
C:\Users\GARIBALDI\AppData\Local\Temp\WER-76456-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txtHi Garibaldi11,
If you are not equipped to debug this problem, you should use some basic troubleshooting techniques.
•Make sure you have enough disk space.
•If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
•Try changing video adapters.
•Check with your hardware vendor for any BIOS updates.
•Disable BIOS memory options such as caching or shadowing.
Bug Check 0x7E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
http://msdn.microsoft.com/en-us/library/windows/hardware/ff559239(v=vs.85).aspx
Bug check 0x1000007E has the same meaning and parameters as bug check 0x7E
Alex Zhao
TechNet Community Support -
PO on vendor not created for a company code
Hi,
When the vendor master is not created for a pur.org., I am getting errror message when I try to create a PO on that vendor/pur.org. combination. But, when the vendor master is not created for a company code, system is allowing me without any error for creating PO on that company code.
I want to set error message for creating PO on a company code for which vendor master is not maintainted. Please let me know the settings required for this.
Thanks.Hi
Normally it will allow to create PO.
If u r not maintaining the company code settings u can not proceed with the MIRO.
U might have created PO through MK01.... But FI team has to enter the Compnay code related details in XK01
Regards,
Raman
Edited by: Raman S on Mar 13, 2009 11:58 AM -
How to prevent WBS element for other Company code to be used in WO
Hi,
I am new to this forum and want to try this out.
This thread is regarding: Area: plant maintenance, create/change work order, message control in wbselement in tab "Addit data"
Detailed explanation:
In our SAP system we have the functionality that when a user enters a wbs element in a Work order (Addit.Data Tab) he gets an error message CJ065 if the WBS element is from another Controlling area.
We want in addition the functionality: show error message CJ 066 when the WBS element is for another Company code.
I have searched in message control within PM, but here is only allowed to enter messages for application area IW.
I have also tried to search for other message classes without finding where in customizing to maintain message class CJ.
Please help
Best Regards
EllenThanks for your feedback Narendra,
I have thought of that solution (using customer exit at save), but hoping maybe there was a setting in Customicing eather in CO or in PM to make message CJ066 appear. When looking at the source code it looks tlike there is a setting in customizing to be triggered, but I cannot find out where..
BR
Ellen
Edited by: Ellen Ødegaard on Apr 29, 2008 2:08 PM -
F-02 Docment posted for cross company code TAX
Dear Experts ,
Can you please explain me ,
when i posted docment in F-02 for cross company code postings that is Dr for 1150 company code and credit for 5500 company code ,
1] i need to enter tax code is YY is same to both company codes 1150 & 5500
] i need to enter tax jurisdiction code for company code 1150 is 1254693 and company code 5500 is 4525658
when i enter these two Tax jurisdiction code system shows error when i saved error message # FF 744
ERROR MESSAGE BELOW
[ The jurisdiction codes entered on the individual line items have different controls for determinating the cash discount base amount (upper level and ).
This is not allowed within a document.
Procedure
Please correct the entered jurisdiction code (if not correct) or if need be, post the transaction to two single documents.
Can you please help me how i enter postings in F-02
Regards
BhaskarThanks
-
Errors for foreign payments in the APP run
HI all
we have created new house bank for foreign payments for foreign vendors. The bank has been created for domestic payments and for foreign payment for the company code.
The domestic payment works fine and the international does not work. It can create payments and IDOCS in SAP but once it is received and it is marked as a DOmestic payment instead of a International payment.
we have tried to go through house bank config and I cannot find what we are missed out in the config.
Can some one help me to find out what we have missed out in the config?
Thnaks in advance
Best Regards
VenuHi Venugopal,
Please paste the log message here to find out what may be wrong with this issue..What is the error message.
As a wild guess, Please check your settings in FBZP>Payment Methods in Company code> Check the section Foreign Payments/Foreign Currency payments, whether all are allowed or not for your Payment method of Foreign payment.
Regards,
SAPFICO -
Document splitting error in cross company code invoice
Hi
I am trying to post an invoice through FB60 which is belong to multiple company code.
while simulating the document, system is not able to find the cost object (profit centre) for vendor line item. following is the detail of the transaction:-
Trasnaction Code - FB60
Vendor (co code 1000) - Cr 10000
Exp (co code 1000) - Dr 5000
Exp (co code 2000) - Dr 5000
Customization detail -
Item category for vendor reconciliation a/c - 03000
item cateogry for inter company clearing a/c - 01000
item cateogry for inter company customer a/c - 02000
Business Trasaction for document type (IC) used in FB60 - 0000. In document type IC i have allowed intercompany trnaction.
can anybody revert where i am missing the configuration. what additional i need to do to get out this error.
please revert
Regards
DDHello,
I also faced similar problem with posting cross company transacation whereby one of the document containing another Customer/Vendor line item which is not the intercompany clearing account. Both the additional Vendor/Customer and the Intercompany Vendor/Customer line items failed to derive the Profit Center information from the offsetting line items. The system recognize the Customer/Vendor line items (additional and Intercompany clearing) as "Leading Items" instead of derivating.
The journal looks like below.
CoCd A
dr. GL Account [PC-A] 100
cr. ICT Vendor-B (100) --> successfully deriving the [PC-A] information
CoCd B
dr. ICT Customer-A 100 --> recognized as "Leading item", failed to derive PC-B
cr. Customer (100) --> recognized as "Leading item", failed to derive PC-B
dr. GL Account [PC-B] 100
cr. GL Account [PC-B] (100)
The GL Account in CoCd B are registered under Item Category "01000" and it has been registered as the splitting base item for the "ICT Customer-A" and "Cusomer" accounts.
Would really appreciate your kind help or suggestion to solve this issue.
Thanks a lot in adavance!
Regards,
Nurul F -
ABAP runtime error for 0CRM_OPPT_H and I while running RSA3
hello Gurus,
I'm having problems while running RSA3 transaction for these data sources.
0CRM_OPPT_H
0CRM_OPPT_I
0CRM_SALES_ACT_1
0CRM_SALES_ACT_I.
I'm getting ABAP runtime error for these.
This is the error:
Runtime Error CALL_FUNCTION_CONFLICT_TAB_TYP
Exception CX_SY_DYN_CALL_ILLEGAL_TYPE
I tried finding OSS notes for these, but I didnt succeed.
I activated the data source from RSA5, and then I tried RSA3. That time I got Errors occurred during extraction.
After that I activated delta at BWA5, then I started getting runtime error.
Even though I activated at BWA5, I am not able to see the data sources at BWA7.
Am I missing any thing please guide me through this .
Thanks
RKRThanks for your replay... All the DS and related tables are active..
But wen I tried to re-generate the DS again... this is the warning I'm getting... Any idea why I'm getting this....
The even-numbered length of the DEC field SAMPLE_QTY_ALLOW can lead to problems
<b>Message no. R8569</b>
<b>Diagnosis</b>
You want to use the field SAMPLE_QTY_ALLOW in the extract structure for DataSource 0CRM_OPPT_I. This field has a field of type 'DEC' (or 'CURR' or 'QUAN') with an even number of characters.
This can create problems since the length resulting from calculations in ABAP (for example, in extractors or Customer Exits for extraction) is too large to be inserted in the database later (PSA in BW), causing a short dump.
<b>Procedure</b>
This warning is only relevant when the maximum length of this field is exceeded during extraction, for example when the field is expanded in the Customer Exit through a calculation.
More information and a remedy can be found in SAP Note 641744.
When I search the OSS note, SAP suggesting to apply 883310 note.
In my company we are using CRM 4.0 servie pak8. SAP suggsting to install service pak 11, but my client is not interested to upgrade to 11 as CRM people are working on service pak 8.
By any chance we can use specific note which change the ABAP code to solve this problem... Please give me some suggetions...
Thanks
RKR
Maybe you are looking for
-
Error message when disconnecting ipod
When ejecting my ipod error message comes up 'cannot disconnect ipod there is content being used by another application' .What is the solution?
-
Installing 11i apps on windows xp and Red Hat linux AS 3.0
Hi, I am a newbie to Oracle E-business suite............i will be very helpful if anybody could help me with the full procedure on how to install Oracle apps on windows on Windows XP and Red Hat linux AS 3.0.........starting with configuring ip.....i
-
HT4437 Cannot play protected movies on AirPlay from iPad
I cannot play a movie from my iPad to my Apple TV device. I get an error "cannot play protected movies". Why is this when I bought the digital copy with the Blu-ray Disc ?
-
Getting Bombarded by Telemarketers and Toll-Free Numbers
Okay, let's start from the beginning: Preface, we have had the same cell phone numbers for over 10 years and we have not had one telemarketing or unwanted call. We started with Verizon Digital Voice on August 26th. By September 1st, we got our first
-
Apia, Samoa time zone support for iCloud
There does not seem to be support for the Apia, Samoa time zone in iCloud. This is an idiosyncratic time zone being UTC +13hrs with daylight savings (UTC +14hr) during the "summer" commencing at 3am on the last Sunday in September and ceasing at 4am