Error: FRM-41076: Error populating Group

hi frs,
i have a created a record group with static values.
while populating the group getting error like
FRM-41076: Error populating Group
how to solve it help pls.
Regards
Rajesh

Rajesh,
You stated you have a static record group (RG). I believe your error is caused by the POPULATE_GROUP() call because the RG is already populated with your static values - there is no need to re-populate the RG. Just call POPULATE_LIST(). You only need to call POPULATE_GROUP() if you are dynamically populating the values in the RG.
Also, how many columns are in your (RG)? To populate a List from a RG - the RG must have 2 columns (label and value) and only two columns. If you only have one column in the RG or if you have more than 2 columns in the RG the POPULATE_LIST will fail. Is your code failing when you call POPULATE_GROUP() or is it failing at POPULATE_LIST()?
Hope this helps.
Craig...

Similar Messages

FRM-41076 Error populating Group in form 10g

I have a record group that i called in WNFI trigger
PROCEDURE POPULATE_DYNAMIC_LIST IS
/* Read each lists values from its record group and populate the list */
temp NUMBER; /* Return value of populate_group call */
rg_id RecordGroup; /* Return value of populate_group call */
BEGIN
rg_id := create_group_from_query('CGDV$DLRG',
'select CODE, CODE '||
'from SOME_TABLE '||
'where Table_name = ''Status'' '||
'order by 1');
temp := populate_group(rg_id);
populate_list('SOME.STATUS', rg_id);
delete_group(rg_id);
END;
The list item is a database item. When I query the form, everything is fine. However, when I change the list item in the form, I am getting the above error. I need to be able to change the list in the form.
ThanX

The code you posted looks ok. If there's a problem when you change the list it is probably in one of the triggers on the list item itself. Do you have any triggers there?

FRM-41075-ERROR DELETING GROUP

HI EVERYBODY,
i created a form with one item which z not database item.i created lov based on query.i created a key-listval trigger for item.when i m running my form,i am getting the following error:FRM-41075:Error deleting group.how to solve this error.
actually my requirement like this,when i give 1 in text item it should get related records in LOV,IF VALUE z not found then it should search through next field in lov itself:
for example:i created a lov with empno.empname.when i give the value 1 in runtime it should invoke LOV WITH related records,if value is not found then i will give some char like S in search field in LOV itself,then it should give related records of starting with S.
please tell the steps clearly.
thanks in advance

Hi,
Do you have a record group with 'group_emp' name under record groups objects. This built in can not delete record groups created at design time(see forms online help 'delete_group').
Just try renaming your group_name varchar2(10) :='group_emp' and see
Regards
Yoonas

Crystal Report error - "the group section cannot be printed..."

Hello to everyone.
I have a CR report based on a database view.
Everything is ok when i run the report in the CR designer but choosing the option to preview the report or run it from the SAP Business One (8.81 PL 08) i get an error:
"the group section cannot be printed because its condition field is nonexistent or invalid. Format the section to choose another condition field. Error in file "the Report name".rpt. Invalid group condition".
i must say that this happens in all my reports where i have group data. Also i must say that all those reports were ok some days before...
Is there a way for me to know what field is it refering to?
I have verified the DB and it is pointing correctly and the also the View returns data.
Thanks in advance

Hello Gordon,
thanks for your response. the reports were working fine until 8.81 PL05
We have upgraded the customer from PL05 - > PL08 a week ago.
Do you think that maybe this is the problem?
Thanks in advance

Error:The grouping element could not be determined for project

Hi,
When I am trying to issue goods for a project,I am getting the following error
"The grouping element could not be determined for project 1., plant 2., and MRP group 3.."
what may be the reason for this reason.
Regards,
Raju

Hi,
You are using Automatic Requirement Grouping in your project and there is some issue with the Material Master,please check the Material Master Views.
Muzamil

PCUI error: Field group could not be read completely

Hello,
I am trying to remove some fields from the Sales Data tab in the Sales Orders application CRMD_BUS2000115. I have changed field groups before, noth in CRM 4.0 and CRM 5.0, but in this case, I always get this error.
By going into debugging mode (tracelevel set to 2222) I determined the main field group to be SLO_SALES, with lots of smaller reference groups below. Whenever I change one of the reference groups and try to generate the layout of SLO_SALES I get the error "Field group could not be read completely". I even reverted all changes by emptying all the entries from the reference groups so that my c-tables are empty, but I still get the error. All field groups below this one yield the error "No field group selected in blueprint table", so I cannot build those either.
Has anybody else tried to change the contents of that application in that tab?
Regards
Thomas

Hi Thomas,
Everytime you do changes in the reference group the entries in table 'CRMC_FIELDGRP' changes. So you will have to go to this table check entries for the main feild group 'SLO_SALES' in your case and then change entries for this feildgroup in CRMC_BLUEPRINT_C. The idea ia that the data should be consistent/same in both the places.
Hope this helps you.
Regards,
Hetal.

TBB1-Execute postings occurs an error *Ledger group 0L may not be used*

Hi everybody,
While trying to execute postings from a commercial paper occurs the following error
Ledger group 0L may not be used
Message no. FAGL_LEDGER_CUST102
Diagnosis
Ledger group &1 is assigned to another application.
I suspect that this is somehow related to Funds management influence, but I can not find the solution,
I really need to overcome this problem so i'll appreciate any help,
Thanks in advance,
Daniel

Hi Prasad,
We created ledger groups in costumizing this issue was solved.
Thank you very much your help.
Regards,
Daniel

Error - Account group does not exist, check classification assignment

Hi Guys,
I am having an BP replication issue from CRM to R3 when i create BP from Web IC with role UTIL_IC. BP gets replicated to R3 if i create BP from GUI.
Bdoc Error - Account group does not exist, check classification assignment
i have completed all the required configuration as below
Setup of no range for BP and assigned to grouping
PIDE settings in R3
Setup if account identification profile in IS solutions
Thanks,
Nitin

Nitin,
Refer to [this|BP replication error; &[this|Contact Person Replication From CRM to R/3; thread.

SAP Open Enrollment Error : Age group could not be determined

Hi Gurus,
We have been trying to configure Open Enrollment and when I try to go in the backend using HRBEN0001, it lists all the eligible plans and lets you complete the Open enrolllment, however in the Error List one error pops up saying "Age Group Cannot be determined". I have a spouse listed in the system, but his birthday has been entered so it should be able to calculate the age group without any issues.
When we login to the portal and try to click on the Open Enrollment tab, no plans show up but only the error "Age Group cannot be determined" shows up.
We have configured three variants for Voluntary Life and Spouse Life for the age groups 1-69, 70-74 and 75+. Could this be the reason of the error?
Has anyone encountered this error before? and if yes, can you please let me know how to resolve this?
Any suggestions will be appreciated.
Thanks
Kavita

Hi Kavitha,
Can you tell me how u resolved the issue???
Regards

"Error when grouping on werks"

Hello,
When i tried to run one custom program i got an error message with the following message "Error when grouping on werks". Pl. suggest what could be the possible problem.

Hi ..
PFB the message no.
Message no. 00368
Thanks.
RK

Getting Error : Material groups remove duplicates

Hi,
User created a Shopping cart,The approval mail did not go to the intended recepient.When i looked into tcode SWI6 the approval is struck with the error "Material groups remove duplicates". The product category against which the shopping cart is raised exists in tcode comm_ Hierarchy.
Pls suggest.
Thanks
Rakesh.

I think the mappings and all would be correct. Here is what Kevin meant:
- Let's assume the AD user account is a part of GroupA, GroupB and GroupC
- Now on Change Organization completion if you invoke Remove user from Group then the adapter/process task has no way to know that which 3 of those groups has to be removed (or all 3 for your case)
- Alternatively if you use API's to remove the group then this task would be invoked by the original OIM process/triggers and so the actual value would be known to adapter/process task.

FRM-41072: cannot create Group

Hi,
I am populating a pick list from a dynamic record group. I keep getting this error message FRM-41072: cannot create Group "start_year_rg". Everything works fine, the picklist gets populated fine everytime I change the value in :control.p_code_control field.
This is my code, it is on a POST-TEXT-ITEM TRIGGER:-
:global.p_code:=:control.p_code_control;
DECLARE
group_id RecordGroup;
list_id Item := Find_Item('col1');
status NUMBER;
qstring varchar2(300);
BEGIN
qstring:='select distinct START_YEAR col1, START_YEAR col2
from project10
where project_code = :global.p_code
order by START_YEAR';
group_id := Create_Group_From_Query('start_year_rg',qstring);
status := Populate_Group('start_year_rg');
POPULATE_LIST('control.start_year_control', 'start_year_rg' );
end;
I am not sure why I keep getting this error message FRM-41072: cannot create Group.
Any help...

Hi ,
Try out the following...
DECLARE
NUMB_VAR NUMBER;
BEGIN
Pick_List.DELETE_Picklist;
Pick_List.Create_Picklist;
NUMB_VAR:=Pick_List.Populate_Picklist_With_Query
(PICK_LIST.LIST_IN,
'select distinct START_YEAR col1, START_YEAR col2
from project10
where project_code = :global.p_code
order by START_YEAR');
Pick_List.Display_Picklist(PICK_LIST.LIST_IN);
END;
Simon

FRM-41072 - Cannot create Group GRP_NAME

In the layout I'm trying to populate Grp_name column values from GRP_TAB table, in the 'GRP_NAME' item list.
This is the code I had written. But when I run the Form, I'm getting 'FRM-41072 - Cannot create Group GRP_NAME'error. What could be the error?
DECLARE
rg_tags varchar2(20) := 'GRP_NAME';
rg_id RecordGroup;
errcode number;
list_id ITEM;
BEGIN
rg_id := create_group_from_query ('GRP_NAME', 'select GRP_NAME, grp_name from grp_tab');
list_id := find_item('GRP_NAME');
errcode := populate_group(rg_id);
populate_list (list_id, rg_id);
END;
P.S. I'm writing this code in WHEN-MOUSE-CLICK Trigger in GRP_NAME list item. Is this the right place to write the code?
Thanks.

> select GRP_NAME, grp_name from grp_tab
Looking up the on-line help for FRM-41072:
FRM-41072: Cannot create Group %s
Cause: Caused by one of the following
1. Duplicate column names in SQL statement.
2. Invalid record group name.
3. Query is invalid.
Action: Check the group name and/or correct the SQL statement.
Looks like you violated rule number 1.

Frm-41826: Cannot replace group; columns don't match LOV

Hi-
I am Oracle ERP developer.
frm-41826: Cannot replace group; columns don't match LOV
this message absolutely don't know .
please help me.

If it is being created programatically, you may want to do a find on some of these key words..
CREATE_GROUP_FROM_QUERY
POPULATE_GROUP
SET_LOV_PROPERTY
They should all be within the same section of code, see what is going on in there.. The code may be trying to use a record group the LOV is not designed for ?

Error on populating group in the list

dear all
i have following group which is not populated the list item is base table item
it gives error no 41337can not populate the list from group
rg_id := create_group_from_query('level_code','select tlm_desc,tlm_level_code from itax_level_master where tlm_level_code like ''0%''');
errcode := Populate_Group(rg_id);
clear_list('trs_level_code');
populate_list('trs_level_code',rg_id);
pls help

As Tony said, datatype is probably wrong. Try this:
rg_id := create_group_from_query('level_code','select tlm_desc,to_char(tlm_level_code) from itax_level_master where tlm_level_code like ''0%''');
errcode := Populate_Group(rg_id);
clear_list('trs_level_code');
populate_list('trs_level_code',rg_id);

Error: FRM-41076: Error populating Group

Similar Messages

Maybe you are looking for