Error on populating group in the list

dear all
i have following group which is not populated the list item is base table item
it gives error no 41337can not populate the list from group
rg_id := create_group_from_query('level_code','select tlm_desc,tlm_level_code from itax_level_master where tlm_level_code like ''0%''');
errcode := Populate_Group(rg_id);
clear_list('trs_level_code');
populate_list('trs_level_code',rg_id);
pls help

As Tony said, datatype is probably wrong. Try this:
rg_id := create_group_from_query('level_code','select tlm_desc,to_char(tlm_level_code) from itax_level_master where tlm_level_code like ''0%''');
errcode := Populate_Group(rg_id);
clear_list('trs_level_code');
populate_list('trs_level_code',rg_id);

Similar Messages

Spool Output Error - last 2 lines of the list were dropped on spool output

Hi,
I am having problem of printing a report in ALV format. The last 2 lines were dropped on the spool output. It was actually dropping the last 2 lines on every row break.
This problem occurs ever since we did a support pack upgrade to SAPKH47030 and SAPKB62064.
Please help.
Thanks
Giana

Apply OSS note 1100728 which was corrected in SAPKB62065.
Problem was caused by support pack SAPKB62063 and SAPKB62064.

I have been successfully sending out e-mails to all people listed in a Group Address but yesterday only some of the people received their mail. Today I split the list, 25 in each Group Address, again, the same people did not receive their e-mail. Why?

I have been successfully sending out e-mails each month to about 50 people whose addresses are listed under a Group Name. Yesterday about half of the e-mails were received, the other half weren't. So I tried splitting the group into 2 separate Groups, again the list who didn't receive the first mailing again did not receive the second mailing. There does not seem to be anything that connects the recipients or non-recipients. They have a mix of providers, it was not just the first half of list that was affected, it appears to be totally random. Any suggestions?

Neither of these error message look like they're from Exchange.
Connected to 68.232.130.28 but connection died. (#4.4.2)
I'm not going to try again; this message has been in the queue too long.
Sorry, I wasn't able to establish an SMTP connection. (#4.4.1)
I'm not going to try again; this message has been in the queue to long.
Are those from NDRs someone in your organization received, or are they from NDRs received by a sender outside your organization?
Is 68.232.130.28 your IP address? The IP address resolves to the name esa2.firstam.iphmx.com. Is that a MX for the recipient's domain?
--- Rich Matheisen MCSE&I, Exchange MVP

URGENT,FRM-41337: Cannot populat the list from record group

Hi all:
Can anyone help me in that problem?
I have a database item in the block as a list item with combo box style and I use this code in WHEN-NEW-RECORD-INSTANCE at the form module level to populate that combo box list:
DECLARE
     group_id RECORDGROUP := FIND_GROUP('group');
     list_id ITEM := FIND_ITEM('employees.job_id');
     x number;
BEGIN
IF NOT ID_NULL (group_id) THEN
          DELETE_GROUP (group_id);
     END IF;
          group_id := CREATE_GROUP_FROM_QUERY ('group','select name,TO_CHAR(id) job from cmn_jobs where job_type_id = 4720 ');
     x := POPULATE_GROUP (group_id);
     POPULATE_LIST (list_id, group_id);
     EXCEPTION
WHEN NO_DATA_FOUND THEN
null;
     END;
That code worked very well and without any problem, but when I change the list item from combo box style to poplist style then the forms give that error:
FRM-41337: Cannot populat the list from record group
And an additional null/blanke element appears in the poplist with original element that come from RECORDGROUP.
So can anyone help me to solve that problem please?

First, how I can assign a default or initial value DYNAMICALLY to my poplist.Set the default-value to a parameter like :PARAMETER.MYPARAMETER then you can assign the desired default-value to the parameter.
second, if I have popliste say X for example depend on another poplist say Y ,so when I put the code to populate popliste X on WHEN-LIST-CHANGED on popliste Y and make query then the >forms return FRM-40301 Query caused no records to be retrieved ,but when I have a copy for that code in WHEN-LIST-CHANGED and put it in WHEN-NEW-FORM-INSTANCE at the form >module the form work and returns records, so is it any error or exception in what I did.Can't answer that, you should check :SYSTEM.LAST_QUERY to see why the query does not returnany records.
At the last, which better to put the code for popliste in PRE-FORM trigger at the form module or in WHEN-NEW-FORM-INSTANCE at the form module.I would use the PRE-FORM-trigger

Error :cannot show the value of the filter.The Field may not be filterable or the number of items returned exceeds the list view threshold enforced by administrator

Issue : In sharepoint 2013, I am experiening below error while using filter in the list view due to the number of items in this list exceeds the list view threshold, which is 10000 items. Tasks that cause excessive server load (such as those
involving all list items) are currently prohibited.
Error :cannot show the value of the filter.The Field may not be filterable or the number of items returned exceeds the list view threshold enforced by administrator
Could you please suggest a way to avoid this issue apart from incrementing the list view threshold limit .
Prashanth

Reorganizing content, or creating more specific views. sharepoint is warning you that the content is structured in such a way that it can cause performance issues, which should be addressed in some way.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Unable to retrieve the list of Standard Reports

Hi,
User needs an aging report in PW90 paper but gets an error message when clicking on to the report tab once logged into SAP portal.
Error message:
Unable to retrieve the list of Standard Reports. Please call the Help Desk to report the problem. Error encountered while connecting to R/3. java.lang.NullPointerException.
I checked the java support in Internet explorer and deleted the cookies and temporary files but he kept having the same issue.
Please Help on this !!
Thanks in advance.

Hi,
Try to restart the portal server.
Regards,

Nokia XL adding a group from the contact

suggestion for improve the Xperience
At the noment, when I want add a group to the contact, I do
1. Add another field
2. I select group from the list
3. I have to tap "choose a group"
4. I can select the group from group list
it will be faster that when I do the point 2, the group list appear immediately.

Submit your suggestions to Nokia.
For suggestions, try http://Nokia.com/global/support/locations select your country.
A past Nokia X user, now a X user.

An efficient means of n naming and organizing Groups in the address book

Hello,
First, I hope you are having a nice day. If not, I hope it gets better soon!
Next, I would like to provide the following before explaining:
Here is an article regarding a novel means of uploading pictures with descriptions from a Mac to Flickr without a "third party" application.
A novel way to upload photos from a Mac, with a complete description, to Flickr [http://www.gather.com/viewArticle.action?articleId=281474978195922].
A very simple example:
Possible list of names in the "Groups" section:
National Politicians
California Politicians
Texas Politicians
Colorado Politicians
In the address book, the above would be organized in the following order with "N" names between. "N" is the other alphabetical names:
California Politicians
<N>
Colorado Politicians
<N>
National Politicians
<N>
Texas Politicians.
*Greater Efficiency*
In my opinion, the following is more efficient means of naming and organizing the address book:
Politicians.National
Politicians.California
Politicians.Texas
Politicians.Colorado
As long as the spelling of the first description and period are included, the latter will be organized as follows with "n" "group names" where "group name" is the "Politicians." group with a "name" between:
Politicians.California
<n>
Politicians.Colorado
<n>
Politicians.National
<n>
Politicians.Texas
If the above four are the only names in the "Politician." "group name", the list would be organized as follows:
<N>
Politicians.California
Politicians.Colorado
Politicians.National
Politicians.Texas
<N>
* The Colon and Problem with "linking" in Mail*
As a side note, I have noticed some Library of Congress links do not "link" in Mail. As an example, I recently noticed that I could not "link" the following "URL" because there was a ":" at the end. If the ":" is not present, the URL will lead to a different page. I will be contacting Apple technical support and report this problem, but, I have figured out a way to circumvent this problem. I explain below.
+Link with colon and then a colon and zero+
• Library of Congress: http://thomas.loc.gov/cgi-bin/query/z?c111:S.2925:
If you paste the above link into the Mail message body and select "Edit" » "Link" » "Add" and "Paste" the link into the text box, the "Add" button will not be triggered. If the ":" is removed, the "Add" button will be triggered and highlighted. Sadly, the link will be incorrect.
Circumvention
In the above case, the solution is quite simple. Just add a zero, "0", after the colon, ":" , as such.
• Library of Congress link with a zero: http://thomas.loc.gov/cgi-bin/query/z?c111:S.2925:0
The above link works and Mac's Mail "Add" feature will add a properly working link to the message body.
By the way, please ask your Congressional Representatives to support the above bill!
Have a nice day! By the way, I am a Chemical Engineer in search of employment! :•)

So how the Addressbook's Group List would look after syncing with the Soho Organizer's Contacts Subgroups organization? If Address book don't have that ability of Subgrouping.
I have been researching after a while now every single possible way without a luck. Please let me know if you find a solution.
Here are a are a couple of interesting apps that are taking contacts organization more seriouslly. But still dont have the answer for it.
5degrees.
http://www.5degrees.us,
$9.99 a month
Desktop and iphone.
Bento
Great for customizing the contacts template.
Also an iphone app.
http://www.filemaker.com/products/bento/
My favorite would be Cobook Contacts since they also have the iphone app. Very clean design.
http://www.macupdate.com/app/mac/41822/cobook
http://www.cobookapp.com
But still, none of this have the Subgroup organizing feature.
Please let me know if toy find a solution.

How to add the Profit center Group in the PA report KE33.

Hi Frnds,
How to add the Profit center Group in the PA report KE33.Iam not able to find PC group in the list to add to the Charateristics already added.

Hi
PC group is not available as a Char in COPA..
if you want to do that, either create a Char Hierarchy in KES3 for the Char Profit Center
OR
Create a WW char in KEa5 and write a derivation rule using the method "Enhancement" .. Write ABAP Code in COPA0001 exit
bt, Ajay M

Error: FRM-41076: Error populating Group

hi frs,
i have a created a record group with static values.
while populating the group getting error like
FRM-41076: Error populating Group
how to solve it help pls.
Regards
Rajesh

Rajesh,
You stated you have a static record group (RG). I believe your error is caused by the POPULATE_GROUP() call because the RG is already populated with your static values - there is no need to re-populate the RG. Just call POPULATE_LIST(). You only need to call POPULATE_GROUP() if you are dynamically populating the values in the RG.
Also, how many columns are in your (RG)? To populate a List from a RG - the RG must have 2 columns (label and value) and only two columns. If you only have one column in the RG or if you have more than 2 columns in the RG the POPULATE_LIST will fail. Is your code failing when you call POPULATE_GROUP() or is it failing at POPULATE_LIST()?
Hope this helps.
Craig...

Frm - 41337 - can not populate the list from record group

Hi
I have created a form with 4 combo boxes. And i am trying to populate the 4 combo boxes dynamically.
Here is my table structure.
BUS_FUNCTION VARCHAR2(500),
SEQ NUMBER,
STEP1 VARCHAR2(500),
STEP2 VARCHAR2(500),
STEP3 VARCHAR2(500),
STEP4 VARCHAR2(500),
KEYSTEP VARCHAR2(4000),
OBJ_NAME VARCHAR2(500),
SME VARCHAR2(50)
In the fist combo box i am retriving bus_function and second seq and third step1.
i wrote a trigger when_new_form_instance and i am calling a procedure from the trigger.
here is my procedure code.
PROCEDURE fp_get_list IS
l_sql_text VARCHAR2(2000);
BEGIN
l_sql_text := 'SELECT bus_function,bus_function FROM TABS_BUS_FUNC';
lp_populate_list('BUSFUNC.list22','rgcat2',l_sql_text);
l_sql_text := 'SELECT TO_CHAR(SEQ),TO_CHAR(SEQ) FROM TABS_BUS_FUNC';
lp_populate_list('BUSFUNC.BUS_FUNC','rgcat',l_sql_text);
l_sql_text := 'SELECT step1,step1 FROM TABS_BUS_FUNC';
lp_populate_list('BUSFUNC.list20','rgcat1',l_sql_text);
END;
Now the problem is i can able to get the values fro the first two colums. but the third column values are not populating.
i am getting an error frm - 41337 - can not populate the list from record group.
PLease help me in this.
Thanks in advance,
Raju

I got answer
i write a code in when-new-form-instance
declare
v_rg_id RECORDGROUP;
v_return number;
v_query varchar2(2000);
outcome number ;
begin
v_rg_id := CREATE_GROUP_FROM_QUERY('RG_LIST','select Dname,To_char(Deptno) deptno from dept');
v_return := POPULATE_GROUP(v_rg_id);
POPULATE_LIST('emp.deptno', 'RG_LIST');
end;
but remember property of list item must be mapping of others value null and initial value null
if ur problem not solve then tel me email, i ll send u fmb file

Is there a way to exclude temporary people picker fields from a query when receiving the "List View Lookup Threshold" error.

Hi All,
My users require the ability to select a sharepoint group from a drop down list and then be able to select a user from a people picker based on the drop down selection.    The best solution I was able to up with, was create a people picker
for each drop down selection and set the Sharepoint group field to the selected group.  All people picker filed are hidden except the one that matches the drop down selection. When creating an entry from the sharepoint list this method
works perfectly.
However, when I add the list onto a site page using an "Listview webpart", then add an infopath web part and then finally connect the two parts, I get a "List View Lookup Threshold" error when selecting an entry from the list. I
understand from the error and reading that this error is related to the number of People pickers in the list.   Is there a way to exclude temporary people picker fields from a site page query, as they are only temporary fields to allow the users
to select a person and then assign the name to another field.
Dwayne

Hi Dwayne,
In SharePoint 2013, we could manually create a list for all users. Here are the reference:
Go to Site Settings > People and Groups > SiteMembers
Modify url
http://sitename/_layouts/15/people.aspx?MembershipGroupId=8 to
http://sp/sites/tutu/_layouts/15/people.aspx?MembershipGroupId=0 , now you will see All people in this site.
Change the view to List view, and copy the listview id in the url
http://sitename/_layouts/15/people.aspx?MembershipGroupId=0&View={viewID}
Go to Settings > List settings, copy the list id in the url
http://sitename/_layouts/15/listedit.aspx?List=listeid&Source=....
Now type the address in IE:
http://sitename/_vti_bin/owssvr.dll?CS=109&Using=_layouts/query.iqy&List=[LISTID]&View=[VIEWID]&CacheControl , such as
http://sp/sites/tutu/_vti_bin/owssvr.dll?CS=109&Using=_layouts/query.iqy&List=f3958d27-9c2f-4f8d-b221-89466e816667&View=696BFDC5-0C6E-4E27-818F-0E6292A18407&CacheControl=1
Save the owssvr.jqy from SharePoint site
Now you could see the file in your desktop with all users, save it as allusers in Excel.
Then import it to your SharePoint site, add an app > find an app > import spreadsheet
Regards,
Rebecca Tu
TechNet Community Support

XSLT List View Web Part Error when Using Group By

I have a Tasks List created a tasks list in SharePoint. The Tasks (normal OOTB template) list works fine in the normal view, however, I have created an XSLT ListView Web Part that points to this tasks list. When I set the web part to display
a view with a "Group By" rule, it returns an error:
"Attempted to use an object that has ceased to exist. (Exception from HRESULT:
0x80030102 (STG_E_REVERTED))
The list has just over 1000 items and the threshold is set to 5000, I have tried indexing the column that I am "grouping by" just in case and that has not worked.
Has anyone experienced this issue before? If so, what steps can be done to display the XSLT List View Web Part properly?

Thank you for the response. I tried the above link and it didn't seem to solve the issue; in fact, when I clicked on Common Control Tasks there wasn't any Data View Tasks such Filter and Sort & Group.
Perhaps some more information would shed light on a solution. I created a list template including content of the task list in question. I was able to display the new list in an XSLT List View Web part with grouping enabled. However, I noticed that
the "Related Content" column was completely empty (it was there, it just had no data in each row). What is the source of this Related Content? I know it is a system column that appears when Workflows generate the item in the list but could it be the
reason for the Web part being unable to display with groupings?

FindGroups - Error while getting group list for login user

Hi All,
I am using below code snippet to search a group in OIM but it gives me "Error while getting group list for login user" error message.
tcResultSet rsetAss = null;
tcGroupOperationsIntf groupIntf = (tcGroupOperationsIntf)utilFactory.getUtility("Thor.API.Operations.tcGroupOperationsIntf");
HashMap mapGrp = new HashMap();
mapGrp.put("Groups.Group Name","DEF_GROUP");
rsetAss = groupIntf.findGroups(mapGrp);
And i am ruuning this code using xelsysadm logon.
com.thortech.xl.util.config.ConfigurationClient.ComplexSetting config = ConfigurationClient.getComplexSettingByPath("Discovery.CoreServer");
Hashtable env = config.getAllSettings();
com.thortech.xl.crypto.tcSignatureMessage moSignature = tcCryptoUtil.sign("xelsysadm", "PrivateKey");
utilFactory = new tcUtilityFactory(env, moSignature);
Any guess?
Thanks & Regards
Inbaa.

Here it is Rajiv,
public class GetUserApprover {
private String defGroup = "DEF_GROUP";
public tcUtilityFactory getUtilFactory()
tcUtilityFactory utilFactory = null;
try
     logger.debug("Initializing the utilFactory");
     com.thortech.xl.util.config.ConfigurationClient.ComplexSetting config = ConfigurationClient.getComplexSettingByPath("Discovery.CoreServer");
Hashtable env = config.getAllSettings();
com.thortech.xl.crypto.tcSignatureMessage moSignature = tcCryptoUtil.sign("xelsysadm", "PrivateKey");
utilFactory = new tcUtilityFactory(env, moSignature);
catch(Exception ex)
     logger.info("Error while getting the utilFactory" + ex.getMessage());
     System.out.println(ex.getMessage());
return utilFactory;
public String getGroupKey(String defGroup){
          String groupKey = null;
          tcUtilityFactory utilFactory = getUtilFactory();
          if(utilFactory != null)
     System.out.println("utilFactory not null. Searching for group:" +defGroup );
               try
          tcResultSet rsetAss = null;
          tcGroupOperationsIntf groupIntf = (tcGroupOperationsIntf)utilFactory.getUtility("Thor.API.Operations.tcGroupOperationsIntf");
          HashMap mapGrp = new HashMap();
          mapGrp.put("Groups.Group Name","DEF_OWNER_GROUP");
          System.out.println("Finding Group....");
          rsetAss = groupIntf.findGroups(mapGrp);
          System.out.println("RowCount-->" +rsetAss.getRowCount() );
          rsetAss.goToRow(0);
          groupKey = rsetAss.getStringValue("Groups.Key");
     System.out.println("GroupKey-->" + groupKey);
     catch(Exception e){
          System.out.println("Error" + e.getMessage());
          return (java.lang.Object)groupKey;
}

FRM-41076 Error populating Group in form 10g

I have a record group that i called in WNFI trigger
PROCEDURE POPULATE_DYNAMIC_LIST IS
/* Read each lists values from its record group and populate the list */
temp NUMBER; /* Return value of populate_group call */
rg_id RecordGroup; /* Return value of populate_group call */
BEGIN
rg_id := create_group_from_query('CGDV$DLRG',
'select CODE, CODE '||
'from SOME_TABLE '||
'where Table_name = ''Status'' '||
'order by 1');
temp := populate_group(rg_id);
populate_list('SOME.STATUS', rg_id);
delete_group(rg_id);
END;
The list item is a database item. When I query the form, everything is fine. However, when I change the list item in the form, I am getting the above error. I need to be able to change the list in the form.
ThanX

The code you posted looks ok. If there's a problem when you change the list it is probably in one of the triggers on the list item itself. Do you have any triggers there?

Error on populating group in the list

Similar Messages

Maybe you are looking for