Error generating report in Report writer (GR214, short dump)

Hello
We are making a report in GGR2. When generating the report group, we have dump with error:
Short text of error message:
Internal error.: SAPMGRW2, Include: MGRW2F20, FORM: GEN_DATAFI
ELD.
Long text of error message:
Technical information about the message:
Message class....... "GR"
Number.............. 214
Variable 1.......... "SAPMGRW2"
Variable 2.......... "MGRW2F20"
Variable 3.......... "GEN_DATAFIELD"
Variable 4.......... " "
I have generated as well via GR52 with the same result.
The report i try to generate has about 500 lines, uses a number of existing sets and has simple formulas in it. When i restrict the number of rows to say 400 I donu2019t have the issue. Is there a restriction to rows in report writer?
Thanks for your help
Kai

Hi,
The error you are receiving could be caused by a large number of row blocks in your report definition, (you can check the report definition with report RGRRDC00). A report should not contain too many row and column blocks. It is not possible to give an upper bound for the number of row blocks (since the length of the coding depends on other parts of the report as well). However, even a complicated Report Writer or Report Painter report should not contain more than 50 row blocks, and reports with more than 100 row blocks should not be defined.
In this case the report(s) have to be redefined. Please also refer to the note 387916 for further information regarding this issue.
When there are more than 30 variables in a report, please have a look at the note 332091.
Please reduce the number of row blocks in the report by using the function 'Edit' -> 'Rows' -> 'Explode' in the Report Painter
definition. This function enables several rows to be created for one row block (in the Report Painter definition one row block is just one row). Report Painter (and Report Writer) are designed to display hierarchical reports where the rows in the few row blocks are built up using the 'Explode' function.
regards
Waman

Similar Messages

Help!! Error Generating demo paper report with barcode from web

Now I am using Oracle 9i AS Release 2 + Report 9i and I try to run the demo paper report "ShippingManifest.rdf" which includes Bar Code inside. But I cannot launch the report successfully. The problem seems the report service cannot call build in package ORA_JAVA. Btw, with the same report, I can run this report on the report bulider without any problem on the same machine.
Actaully, can I launch this demo report from web? If so, how can I includes classpath for the bulid in package?
or I must use JSP report instead?
Thanks & Regards
Louis Lei

Hi Philipp,
My environment is Windows 2000. After I added by classPath in rwEng, my report can launch on web now. Thanks you for your help.
But, another question is: I can display chinese character on both HTML and PDF if I run the report on report bulider. But if I run the report on the web, the Chinese charecter can not be displayed on boht HTML and PDF. I tried to modify the NLS_LANG in registry and environment variable, but also failed.
On the other hand, I use http://www.abc.com:7778/reports/rwservlet/showenv?server=rep_winrms to display the environment. It always return TRADITIONAL CHINESE_TAIWAN.UTF8 for environment variable NLS_LANG. Do you want know how to modify this value?
Thanks & Regards,
Louis Lei

Reporting Agent : Alert Monitor Preview - Short Dump

Hi All,
I have some questions related to Reporting Agent :
1.) When I am executing the Alert Monitor Preview, it ends with short dump.
2.) Where to do the settings for Email, Printing and Alert settings so as to send the notifications to the user using the different output options as mentioned above.
Please provide solutions.

Hi Richa,
Chech in txn ST22 for your short dump to analyse the root cause of the error.
See this link for integration of BW Reporting with Alert Monitor.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/031faa90-0201-0010-23b3-a5b88e812d15
Cheers!
Amit

Custom error message in user exit is giving Short dump

Hi All,
We have a scenario where in if any user try to create/Change/Delete particular types of contract in SAP system we have to issue error message
saying ZIN/ZIR contract creation/Change/Deletion is blocked in SAP. This has to be done from the web application. So we are putting below code
in user exit MV45AFZZ in the form USEREXIT_SAVE_DOCUMENT_PREPARE.
CONSTANTS: lc_vbcpic01 TYPE sy-uname VALUE u2018VBCPIC01u2019, u201CWeb application user ID
         lc_zin           TYPE vbak-auart VALUE u2018ZINu2019,
                     lc_zir            TYPE vbak-auart VALUE u2018ZIRu2019,
                     lc_text(32)    TYPE c VALUE u2018Check long text for more detailsu2019.
DATA: l_uname TYPE sy-uname.
CLEAR: l_uname.
MOVE sy-uname TO l_uname.
*If user ID is not the Web application ID then block the creation/Change/Deletion
IF   l_uname NE lc_vbcpic01
AND ( vbak-auart EQ lc_zin
OR    vbak-auart EQ lc_zir ).
MESSAGE e830(zv) WITH lc_text.
ENDIF.
This code is working fine while creating/Changing the contract i.e. Giving us error message so that user wonu2019t be able to create/change the contract.
But when we delete the contract from VA42, Control is coming to this message statement and is giving Short dump. Below is the error analysis of the dump.
Error Analysis:
During "Exit Command" processing, the program tried to send a " " message.
This is not allowed at this point in processing.
The program had to be terminated.
Screen name.............. "SAPMV45A"
Screen number............ 4001
If any one has come across such scenario/any work around for this problem please let me know your inputs. Your inputs are highly appreciated.
I am working on 4.6C version of SAP.
Note: When i issue information/Warning message contract is getting deleted after displaying the message.
Thanks,
Vinod.

I exactly replicated the same in DELETE_DOCUMENT also
I am getting the Dump. I tried with exit also , but it continued and deleted. To avoid deletion we have to use Leave program or LEAVE TO CURRENT TRANSACTION.
Delete Function is Defined as EXIT command. so it is not possible to give error message. To convice you i just copied demo program and raised the error message.
it is also giving the dump.
copy the demo program DEMO_DYNPRO_AT_EXIT_COMMAND and make this change , information to error .
MODULE cancel INPUT.
MESSAGE e888(sabapdocu) WITH text-001 ok_code input1 input2.
IF ok_code = 'CANCEL'.
    CLEAR ok_code.
    LEAVE PROGRAM.
ENDIF.
ENDMODULE.
and see...

How to catch the error if an RFC fails due to short dump

Hi All,
I was calling the RFC Function module in parallel processing depends on the number of work processors available. I am getting the return message from the Function module using the perform statement
PERFORMING task_return ON END OF TASK
But I am not able to catch the errors if the RFC has been terminated due to the dump or manually killing the RFC while running.
I need how to handle the RFC if the call has been terminated due to the dump or system failure. Does the RFC return the sy-subrc at this time or can we able to catch the error in any other way.
Thanks & regards,
Vijay

Hello Vijay,
If you're calling RFC from outside SAP using the OCX-SAPFunctions-Library, then you can catch the dump or any other exception occuring in your SAP-Function.
Assuming that, objRFCFunc is the RFC-Function you can get the Excepetion-Code through objRFCFunc.Exception.
It returns a String. If the error was a dump, the String is "SYSTEM_FAILURE". If it is a "regular" Exception you'll get the Exceptioncode. E.g. "NO_DATA_FOUND".
If you need any sample code e.g. VBA-code for use in Office-Applications, let me know.
regards
Sven

Short dump when I do total or sub total in the ALV report

Hi,
When I do total or sub-total on the currency field in the ALV report, it'll give a short dump like
" The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X)".
   Short text of error message:
   Technical information about the message:
   Message classe...... "0K"
   Number.............. 000
   Variable 1.......... " "
   Variable 2.......... " "
   Variable 3.......... " "
   Variable 4.......... " "
   Variable 3.......... " "
   Variable 4.......... " "
Trigger Location of Runtime Error
    Program                                 SAPLSLVC
    Include                                 LSLVCF36
    Row                                     2,726
    Module type                             (FORM)
    Module Name                             FILL_DATA_TABLE
sometime when I do the page down on the ALV report, the same short dump is coming.
Can anyone help me out.
Thanks
Selva

Hi,
I'm getting this short dump in the standard program.
I'm getting ALV report display perfectly. the problem is, when I do total or subtotal on the currency fields.
2704
2705 ************************************
2706 * Column per Fieldcat Entry
2707 ************************************
2708         ls_lvc_data-value = space.
2709         clear ls_lvc_data-style.
2710         loop at it_fcat_local assigning <ls_fcat>
2711                 where tech ne 'X' and no_out ne 'X'.
2712           if l_invisible eq 'X'.
2713             clear l_invisible.
2714             if <ls_fcat>-do_sum is initial.
2715               continue.
2716             else.
2717               clear ls_lvc_data-col_pos.
2718             endif.
2719           endif.
2720
2721           add 1 to ls_lvc_data-col_pos.
2722
2723           assign component <ls_fcat>-fieldname
2724                            of structure <ls_data> to <l_field_value>.
2725           if sy-subrc ne 0.
>>>>>             message x000(0k).
2727           endif.
2728
in this standard program, I'm getting the dump. the line is mentioned above in the code.

TSV_TNEW_PAGE_ALLOC_FAILED error while executing the report

Hi all,
. We are having an info cubeXFIAP_C12 (FIAP: Vendor Line Item Open).In which we have defined 10 Dimensions and 6 Line Item Dimensions. We have created a report on this with Key date as Input Variable Which gives me From Start to Till Date data. Also have an Variable on company code.
Then No of Records in my Cube is 45, 70,624.Compressed the Info Cube data .But No aggregates on it.
Now when I provide the key date as 30.06.2011 and Company code =XYZ.
I am unable to Execute the Report, It gives me a short Dump. Saying NO ROLL MEMORY.
Variables:
1. Key Date: Is a Customer Exit variable .If user Enters Data as 30.06.2011 ,It fetches data from u201C00000000u201D to u201C30.06.2011u201D.
2.Company code: Is a Manual Entry /Default variable.
I also have shot dump.Please find the error analysis of dump below:
The internal table "\FUNCTION-POOL=RRK0\FORM=MEGA_SORT_M\DATA=C_TSX_SORTK[2]-GT
ABIX[1]-GTABIX" could not be further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 4
Number of rows: 1503307
Allocated rows: 1503307
Newly requested rows: 2048 (in 1 blocks)
can any one help me .......
Regards
Laxman

Hi,
Just check following things
1http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCSTMM/BCCSTMM.pdf
2. See whether any back up process is happening and it has consumed the main memory.
3. Are you getting this error regularly
4. See any transport went and compression/aggregation got removed.
5. Check whether there are many dumps in ST22 same time when you execute report
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4ab89e84-0d01-0010-cda2-82ddc3548c65?QuickLink=index&overridelayout=true
6. http://www.sap-press.de/download/dateien/1049/sappress_bw_performance_optimization_guide_080.pdf
7. Check whether Infoprovifder got removed from BIA
8. Query removed from BIA post transport
9. Run RSRT and regenerate the report.
Thanks and regards
Kiran

Lenght of report output - Short dump

Hi,
we are trying to execute a report and its going to short dump saying the output length of list is more (than the length of the list). Generally when the list length is more, than the next record should print in 2nd page. But we are getting error. Can some one please help us.
Thanks.

Hi,
First go to Tcode ST22--->chooes ur name--
> Today
and try to find the error in ur report.
other thing based on list o/p define ur list length.
Regards
Gaurav

Error generating AUTOTRACE EXPLAIN repor

Good morning Everyone ;
SQL> update tab1 set amount=amount+1 where rownum < 1000000 ;
999999 rows updated.
Elapsed: 00:02:13.03
Execution Plan
Plan hash value: 1852225085
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | UPDATE STATEMENT | | 999K| 12M| 3311 (5)| 00:00:40 |
| 1 | UPDATE | TAB1 | | | | |
|* 2 | COUNT STOPKEY | | | | | |
| 3 | TABLE ACCESS FULL| TAB1 | 5885K| 72M| 3311 (5)| 00:00:40 |
Predicate Information (identified by operation id):
2 - filter(ROWNUM<1000000)
Note
- dynamic sampling used for this statement
SQL> select mview_name,staleness from user_mviews;
MVIEW_NAME STALENESS
MV1 FRESH
Elapsed: 00:00:00.08
Execution Plan
ERROR:
ORA-01039: insufficient privileges on underlying objects of the view
SP2-0612: Error generating AUTOTRACE EXPLAIN report
- what this error indicates ?
Edited by: 969352 on May 30, 2013 5:11 AM

how hard is search....
SET AUTOTRACE ON ERROR..

Short dump while accessing the table

There is a report ppioa0000, when executing the report it is going for short dump, error analysis showing that
<b>when accessing the attributes of dictionary table IOSOPER meaningless values are found.</b>
and ABAP run time error showing that DDIC_FIELD_ACCESS_ERROR
suggest me,
thanks and regards
krishna

The database is damaged, links between SAP dictionary and actual database seems to be broken. Try to use SE14 to adjust database.
Regards

Short dump while accessing the IOSOPER

There is a report ppioa0000, when executing the report it is going for short dump, error analysis showing that
<b>when accessing the attributes of dictionary Table IOSOPER meaningless values are found.</b>
but IOSOPER is a Structure
and ABAP run time error showing that DDIC_FIELD_ACCESS_ERROR
suggest me,
thanks and regards
krishna

closing unable to find answer

How to Fetch Cancelled Jobs info along with the Short Dump Text

Hi Gurus,
I need to develop a report to fetch the cancelled jobs information for the given period. I also need to display the "Error Analysis" part of the Short Dump if it exists.
I am able to fetch the Failed Jobs information and the Job log details using the FM "BP_JOBLOG_READ". But I need to show the "Error Analysis Text" on the report , if there is any Short Dump Exists for the Dump.
Please give me your ideas to fetch the Error Analysis part of the short dump for a given Batch Job Name.
Thanks in Advance.
Best Regards,
Sumalatha

The dump information is in table SNAP. You could identify which dump you want by the date & time of the failed job - let's hope you don't have more than one dump with the same time. If it is ambiguous you could also compare the program name of the failed step with the program name in the SNAP data.
The error analysis texts are in table SNAPT keyed according to which error occurred (which is data element code FC right at the start of the first record in the SNAP data). You will have to expand out the includes, and substitute the variable codes using values from the SNAP data. There is standard code to do this that you could copy - see program SAPMS380.
To find out the details of the SAP process you could run transaction ST22 via the debugger and use the same mechanism.
best wishes
Ed
PS Note these details apply to recent systems I think there may be differences if you go back to before ?2004, but I don't have such a system so can't check. You didn't say what release you have.

Short Dump while including custom text

Hi Guru's
            I am new to workflow and i have a requirement to include a custom text by replacing the standard one.
            I selected the user decision and navigated to control tab there i got the task number, i just copied the task
           number by using the transaction pftc_cop and reassigned the custom task number.Now i can view the
           custom text in the preview but while doing the check it shows "1 warnings and 0 errors" and while
           activation it goes to short dump can you please resolve my issue as soon as possible.

Hi Suresh,
               I checked in SWU3. While performing automatic workflow customizing
               it shows an information message as "Customizing already carried out".
Below i had given the short dump description.Please have a look and make me clear
What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
How to correct the error.
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "SAPLOLEA" or "LOLEAU02"
    "AC_SYSTEM_FLUSH"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
Regards,
Manoj

Short Dump ASSIGN_TYPE_CONFLICT in Virtual KF implementation

Hi
Iam getting a short dump in my virtual KF code. Here is the code that I have written. If I have only bill date it works fine. The minute I add company code it gives the short dump. Can you pls let me know what is it that Iam doing wrong. any help will be greatly useful. Thanks.
INCLUDE ZXRSRU02
DATA: L_S_CHANM TYPE RRKE_S_CHANM.
DATA: L_SUBRC1 TYPE SY-SUBRC. "execute only, if key figure really used
CASE I_S_RKB1D-INFOCUBE.
   WHEN '0SD_C03'.
            L_S_CHANM-CHANM = '0BILL_DATE'.
            L_S_CHANM-MODE = RRKE_C_MODE-READ.
            APPEND L_S_CHANM TO E_T_CHANM.
            L_S_CHANM-CHANM = '0COMP_CODE'.
            L_S_CHANM-MODE = RRKE_C_MODE-READ.
            APPEND L_S_CHANM TO E_T_CHANM.
            APPEND 'ZCOUNT1' TO E_T_KYFNM.
ENDCASE.
*Include ZXRSRTOP*
DATA : G_POS_0SD_C03_0BILL_DATE TYPE I.
DATA : G_POS_0SD_C03_0COMP_CODE(4).
DATA : G_POS_0SD_C03_ZCOUNT1 TYPE I.
Include ZXRSRZZZ
FORM USER_0SD_C03 USING I_S_RKB1D TYPE RSR_S_RKB1D
CHANGING C_S_DATA TYPE ANY.
DATA: l_zcount1 TYPE int4.
FIELD-SYMBOLS <L_0BILL_DATE>.
FIELD-SYMBOLS <L_0COMP_CODE>.
FIELD-SYMBOLS <L_ZCOUNT1>.
ASSIGN COMPONENT G_POS_0SD_C03_0BILL_DATE
OF STRUCTURE C_S_DATA TO <L_0BILL_DATE>.
ASSIGN COMPONENT G_POS_0SD_C03_0COMP_CODE
OF STRUCTURE C_S_DATA TO <L_0COMP_CODE>.
ASSIGN COMPONENT G_POS_0SD_C03_ZCOUNT1
OF STRUCTURE C_S_DATA TO <L_ZCOUNT1>.
IF <L_0COMP_CODE> = 'AB99'.
    CALL FUNCTION 'ZCALC_WDAYS_BETWEEN_DATES'
      EXPORTING
        P_DATE1 = <L_0BILL_DATE>
        P_DATE2 = SY-DATUM
        P_CAL_ID = 'Z1'
      IMPORTING
        P_DAYS   = l_zcount1.
    <L_ZCOUNT1> = l_zcount1.
ELSEIF <L_0COMP_CODE> = 'DC99'.
    CALL FUNCTION 'ZCALC_WDAYS_BETWEEN_DATES'
      EXPORTING
        P_DATE1 = <L_0BILL_DATE>
        P_DATE2 = SY-DATUM
        P_CAL_ID = 'Z2'
      IMPORTING
        P_DAYS   = l_zcount1.
    <L_ZCOUNT1> = l_zcount1.
ENDIF.
The short dump:
ASSIGN_TYPE_CONFLICT
"CL_IM_RSR_OLAP_BADI===========CP" or "CL_IM_RSR_OLAP_BADI===========CM002"
"IF_EX_RSR_OLAP_BADI~INITIALIZE"
get field postions for characteristics in structure
LOOP AT i_th_sfc ASSIGNING <l_s_sfc>
     WHERE user_exit NE rrke_c_mode-none.
field name in structure is keyreturnnm
name of the global variable
CONCATENATE '(SAPLXRSR)G_POS' i_s_rkb1d-infocube <l_s_sfc>-chanm
      INTO l_global_name
      SEPARATED BY '_'.
fill the global variable
UNASSIGN <l_global>.
>>>>>>>> ASSIGN (l_global_name) TO <l_global>.

My suggestion is that you review the how-to papers on SDN regarding exit RSR00002 or RSR_OLAP_BADI. These are alternative methods of accomplishing virtual characteristics and key figures. The code you have given is for exit RSR00002 (although it is full of syntax errors so is not executable), but the short dump you are getting refers to RSR_OLAP_BADI, so you must have implemented that Class as well, but incompletely.
Which method are you attempting to use?

Landscape Verification returns short dump

Dear All,
I'm trying to run transaction LVSM -Landscape Verification for SolMan- but a short dump is appearing. We recently updated solman from ehp1 SP 19 to SP 27 (latest available) and installed Landscape Verification 1.0
Runtime error ASSERTION_FAILED while running transaction LVSM
the short dump is in the function module SMSY_BASIC_GET_DATA
in the following check:
* Security check ======================================================
DATA: lv_secu_violation_occured TYPE c VALUE '',
        lv_secu_exception_disabled TYPE c.
PERFORM check_security TABLES select_condition
                         USING tabname
                                updatemode
                                version
                                systemtype
                       CHANGING lv_secu_violation_occured.
PERFORM get_smsy_option_value USING 'SCUEXC_DIS'
                             CHANGING lv_secu_exception_disabled.
IF lv_secu_violation_occured = smsy4_c_true AND
     lv_secu_exception_disabled = smsy4_c_false.
*   Throw exception SECURITY_VIOLATION
" >> 23.12.10 D049273
" Don't throw an exception here, because user of this FM don't expect/handle a
" security exception. This leads to errors/ program behaviour which blurs
" the root cause of the error. Instead we dump because security violation here
" is a realy unexpected case.
*    RAISE security_violation.
    ASSERT 0 = 1.
ENDIF.
* Security check ======================================================
Any help will be really appreciated.
Best Regards,
Erick Acosta

Yes, I have the role SAP_SMSY_LV_ALL and SAP_SMSY_ALL according to config. guide.
I've updated ST-LV to SP 2 and now the dump is not longer happening.
Thanks anyway!
BR,
Erick Acosta

Error generating report in Report writer (GR214, short dump)

Similar Messages

Maybe you are looking for