Short dump while accessing the table

There is a report ppioa0000, when executing the report it is going for short dump, error analysis showing that
<b>when accessing the attributes of dictionary table IOSOPER meaningless values are found.</b>
and ABAP run time error showing that DDIC_FIELD_ACCESS_ERROR
suggest me,
thanks and regards
krishna

The database is damaged, links between SAP dictionary and actual database seems to be broken. Try to use SE14 to adjust database.
Regards

Similar Messages

Short dump while accessing the IOSOPER

There is a report ppioa0000, when executing the report it is going for short dump, error analysis showing that
<b>when accessing the attributes of dictionary Table IOSOPER meaningless values are found.</b>
but IOSOPER is a Structure
and ABAP run time error showing that DDIC_FIELD_ACCESS_ERROR
suggest me,
thanks and regards
krishna

closing unable to find answer

Short dump while changing the end date of infotype 0167 through PA30

Hi all,
I am getting short dump while changing the end date of infotype 0167(Health Plans) through Tcode PA30.
dump descript is as below
An exception occurred that was not caught.
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_HRPA_VIOLATED_POSTCOND
Date and Time          11.03.2010 07:06:26
What happened?
    The exception 'CX_HRPA_VIOLATED_POSTCONDITION' was raised, but it was not
     caught anywhere along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CL_HRPA_SAPUP50R_ADAPTER======CP' has to be
    terminated.
thanks
shahid

Search OSS Notes for that.

Short Dump While Accessing RSA1 in BI7.0 with SP 21

Hi,
The following short dump occurs, while Accessing RSA1 in BI7.0
Runtime Errors SYNTAX_ERROR
Date and Time 26.10.2010 10:19:35
Short text
     Syntax error in program "CL_RSTRAN_STAT================CP ".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "CL_RSAWBN_OBJ_TRFN============CP" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
     The following syntax error occurred in program
      "CL_RSTRAN_STAT================CP " in include
      "CL_RSTRAN_STAT================CM00X " in
     line 34:
     "Der formale Parameter "E_TLOGO_MASK" existiert nicht."
     The include has been created and last changed by:
     Created by: "SAP "
     Last changed by: "SAP "
     Error in the ABAP Application Program
     The current ABAP program "CL_RSAWBN_OBJ_TRFN============CP" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
    Please eliminate the error by performing a syntax check
    (or an extended program check) on the program "CL_RSTRAN_STAT================CP
    You can also perform the syntax check from the ABAP Editor.
    If the problem persists, proceed as follows:
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    The following syntax error was found in the program
     CL_RSTRAN_STAT================CP :
    "Der formale Parameter "E_TLOGO_MASK" existiert nicht."
i.e parameter E_TLOGO_MASK is not existing.
I have gone through below old thread, but its for old SP
Runtime Error SYNTAX_ERROR while accessing the T-code RSA1
In our case, I guess it refers to our patch level as this SAP Note is referring to support package 17,
but we have implemented support package 21.
Please help <REMOVED_BY_MODERATOR> as this is blocking our next level in BI upgrade process.
Thanks in advance.
Regards,
Manikandan Dhanakoti
Edited by: Manikandan.D on Oct 29, 2010 8:37 AM
Edited by: Pravender on Nov 1, 2010 12:30 PM

See if below threat is any help.
Runtime Error SYNTAX_ERROR while accessing the T-code RSA1

Short Dump while saving the changes in Quotation

Hi abapers,
Please solve my Problem Actually Problem with the Quotation. I have created one SAP Script and attached to VA21. now when I save the Quotation it gets saved byut when I try to open the Quotation in VA22/Va23 first it gives me a short dump but next time it opens up without any short dump.
I get a Short Dump " LOAD_PROGRAM_LOST". Short Description is : "Program "ZZV1SOCONFIRM_INCLUDE" was modified during the run.".
this is just an include which I used it in my SAP Script. Can anybody suggest me what happened with the code.
Below is the Error Anaysis in ST22.
Error analysis
    While the program was running, the program "ZZV1SOCONFIRM_INCLUDE" had to be
     reloaded
    because a bottleneck pushed it out of the local
    program buffer. However, the database was found to contain an already
    changed program.

Hi Mike,
I think by the time you trigger the print out of quotation, Program active version might not be generated. you might have given the print before it gets the active version.
If you are still getting the dump, then it could be problem at output config.
Regards,
Satish

Short dump while opening the infopackage............

Hi,
I am getting Short dump. This happens when I am opening any info package for one Infosource. I am not getting any error when I open other infopackages. There are 7 infopackages for this info source and when I open any of these , gets Short Dump with message ...
" The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X)."
Has any body faced similar problem. Please let me know your ideas on , how to solve this short dump.
Best Regards,
Jeetu

Hi..
When you delete the update status of a request in an InfoCube, short dump
MESSAGE_TYPE_X occurs in program RSBLOGSTATE
You can use the attached program as a correction to check for data inconsistencies and to correct them.
Input parameter:
i_tablnm: ' ' all 'PSA' tables are processed
             '/BIC/B......... ' a special table
i_repair: 'X' data with Partno = 0 are corrected.
             ' ' Check whether data with Partno = 0 exists
i_debug    'X' Activation of default breakpoints
To implement the program, you must create the SAP_PSA_ZEROCORRECT program as an SAP advance correction, leave it empty (Package: RSDD) and then implement it using Transaction SNOTE. Alternatively, you can create the program using the CUT and PASTE method.
If you want to check or correct all tables, you should schedule the program in the background since the runtime (in particular for repairing the tables) may be very long.
In the spool output of the job, you also find the log of the program.
You should first check in check mode whether there is inconsistent data. If this is the case, you must execute the program with i_reapir = 'X'. SAP recommends that you create a variant for the CHECK job and a variant for the REPAIR job.

Short dump while executing the DTP

Dear Experts,
While executing the DTP the system is generated short dump and it is Quality server not in Development system.
The error details are in method Calculate_keyfigure_ds and the data is loaded for IS retails from POSDM.
The error details:
"The MOVE-CORRESPONDING statement can only be used on operands with a
structured type.
In the case at hand, this condition is not fulfilled: Operand "<L_STRUC>" has
the type "C"."
Regards,
Amit

Hi Amit ,
Move corresponding statements can be used for structures only and from the error message it seems that there is datatype mismatch.
Check for the errors ion link :
http://help.sap.com/abapdocu/en/ABAPMOVE-CORRESPONDING.htm
Hope it helps ,
Regards,
Supriya

Short Dump while acessing external tables using DB Connect

Hello SDN'rs,
I am getting Short dump (below) when i am trying to look into the table contents using DB Connect.
Please let me know how to resolve this problem. Is there any OSS Note on this??
External Database is Oracle; i can look into other tables.
ShrtText
Syntax error in program "GP_CREATE_STRUCTURE_DBCON_026 "
|What happened?                                                                                |
|    Error in ABAP application program.                                                            |
|                                                                                |
|    The current ABAP program "CL_RS_STRUC===================CP" had to be                         |
|     terminated because one of the                                                                |
|    statements could not be executed.                                                             |
|                                                                                |
|    This is probably due to an error in the ABAP program.                                         |
|                                                                                |
|    In program "GP_CREATE_STRUCTURE_DBCON_026 ", the following syntax error                       |
|     occurred                                                                                |
|    in the Include "GP_CREATE_STRUCTURE_DBCON_026 " in line 5:                                    |
|    "Type "D" can only have the length specification "8" or no length speci"                      |
|    "fication at all."                                                                            |
|    " "                                                                                |
|    " "                                                                                |
|                                                                                |
|    Author and last person to change the Include are:                                             |
|    Author "XYZ "                                                                            |
|    Last changed by "XYZ
|Error analysis                                                                                |
|    In program "GP_CREATE_STRUCTURE_DBCON_026 ", the following syntax error                       |
|     occurred:                                                                                |
|    "Type "D" can only have the length specification "8" or no length speci"                      |
|    "fication at all."                                                                            |
|    " "                                                                                |
|    " "                                                                                |
Trigger Location of Runtime Error                                                                 |
|    Program                                 CL_RS_STRUC===================CP                      |
|    Include                                 CL_RS_STRUC===================CM002                   |
|    Row                                     108                                                   |
|    Module type                             (METHOD)                                              |
|    Module Name                             CREATE
Thanks,
Faizee B

When i tried today for the same table i am getting the shortdump description(below), I have noticed that the number have changed from 026 to 055, any thoughts why it happen and how it can be resolved?
In program "GP_CREATE_STRUCTURE_DBCON_055 ", the following syntax error
occurred in the Include "GP_CREATE_STRUCTURE_DBCON_055 " in line 5:
    "Type "D" can only have the length specification "8" or no length specification at all."
Thanks,
Faizee B

TimeOUT Short dump while accessing WebReport.

A Web Report is taking too much time to open and timing out with a short dump see below details,
The Report was working very fine few days back,
any ideas please.
Information on where terminated
    The termination occurred in the ABAP program "SAPLRSDRS" in
     "FETCH_DATA_OPENSQL".
    The main program was "SAPMHTTP ".
    The termination occurred in line 121 of the source code of the (Include)
     program "LRSDRSF04"
    of the source code of program "LRSDRSF04" (when calling the editor 1210).

Hi Shashi,
Try to do following checks
1> How much time the report used to take?
2> Is there any increase in data volume recently?
3> How many records query is trying to pull?
4> Aggregation done, (if any aggregates exist)
5> Statistics are up to date? (performance tab check)
6> Indexes & Aggregate indexed are green (performance tab check)
Based on above checks, perhaps, you have to go for building some aggregates.
Regards,
Sree

Dump while accessing the View

Hi Folks,
I'm ending with dump with a simple select query.
SELECT *
    FROM zview_gltr_data
    INTO
   TABLE t_gltr_data.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"GET_VIEW_DATA" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
How to correct the error
The exception must either be prevented, caught within the procedure
"GET_VIEW_DATA"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Database error text........: "ORA-28000: the account is locked#ORA-02063:
preceding line from TWVERTRA"
Internal call code.........: "[RSQL/FTCH/ZVIEW_AP_TR_LOAD ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
Can anyone lemme know how to over come from this error.
Thks in advance
VEnK@

HI Suhas,
In my case it is projection view. So if i use VIEW_GET_DATE FM can i over come from this dump. How can this FM effect in over coming from this dump, just wanna know the technicality in this case.
And also wanna bring to you another point like, at times this select query is going fine and at times getting failed.
Regards
VEnK@
Edited by: Venkat Reddy on Apr 6, 2011 5:10 PM

Getting Short Dump while using the FM"SAP_CONVERT_TO_TEX_FORMAT"

Hello Experts,
    I am using the FM SAP_CONVERT_TO_TEX_FORMAT to convert the data in text format and use
that converted data to create the file on application server. When I used this FM to convert the data from T0599Z table then it's giving me dump for other tables it's working fine.
Can anyone suggest why this is happening?
Thanks

Can you write the codes...
Try something of below sort..
CALL FUNCTION 'SAP_CONVERT_TO_TEX_FORMAT'
   EXPORTING
     i_field_seperator          = ','           "For CSV Files
    TABLES
      i_tab_sap_data             = gt_outtab1
   CHANGING
     i_tab_converted_data       = gt_outtab.

SRM Create Confirmation - Short Dump while adding Approver

Dear Experts.
Currently I am facing following issue.
Issue:
In SRM “Create Confirmation” Screen, when user click on check button and after that if user tries to add approver in approval tab then it is going to short dump. Please find the short dump info:
Category ABAP Programming Error
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_OS_OBJECT_NOT_FOUND
ABAP Program /SAPSRM/CL_WF_PROCESS_MANAGER=CP
Application Component SRM-EBP-WFL
I had analyzed this issue and following points are my findings.
We have written code in BBP_DOC_CHECK_BADI to check the approver is added or not in approval tab. For this purpose we are using METHOD lo_conf_adv->/sapsrm/if_pdo_do_apv_ext~get_process_info (Here lo_conf_adv is object of interface /sapsrm/if_pdo_bo_conf_adv) and the instance of lo_conf_adv is getting from METHOD /sapsrm/cl_pdo_fact_conf_adv=>get_buffered_instance By pasing Doc GUID.
As per my analysis, the above code only causing the short dump while adding the approver in aproval tab. More importantly the CHECK BADI (BBP_DOC_CHECK_BADI) is not triggered while adding the approver.
If I comment this code (which is mentioned in point 1), then the application is not giving any short dump and adding approver successfully.
I tried to find SAP notes but there are no SAP notes related to this issue. Also, I tried to find alternate METHOD to replace lo_conf_adv->/sapsrm/if_pdo_do_apv_ext~get_process_info but I have not got relevant method. Please let me know if there is any solution for this issue.
Thanks & Regards,
Sasidhar V

Hi Ritesh,
Thanks for the fast response.
We are using Process Controlled Workflow. In Doc Check BADI, we are checking the respective approver is added or not in approval tab in "Create Confirmation" Screen. While creating confirmation, when user click on "CHECK" button and If respective approver is not added then throwing error message.
We are using Method "GET_PROCESS_INFO" to get approval information only. when this method is triggered in Check BADI then it is doing respective validations and displaying messages. After that when we try to add approver then the system trying to read entry from table "/SAPSRM/D_WF_003" by passing OID to LEVEL_GUID. But there is no entry in this table and that's why it is giving short dump.
Can you please let me know why it is reading entry in that table and why entry is not exist.
FYI, If I don't use method "GET_PROCESS_INFO" in check BADI then respective code where short dump happening is not triggering (System is not trying to read entry from /SAPSRM/D_WF_003 table) and so it is not giving short dump.
Thanks & Regards,
Sasidhar V.

Short Dump while execuition of DTP.

Hi,
I got short dump while execuiting the DTP.
Error messages shows as below:
1.The database returned a value containing an error
2.An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause
3.Exception CX_SY_NO_HANDLER logged
Could you please help us in solving this issue.
Regards,
Suman.

hi,
an error like this comes usually in 2 cases
1) not enough resources are available to carry out loads.in this case increase no of parallel processes to 2-3 in dtp setting,check the option get delta request by request(if its a delta load) and decrease packet size to 10000(from default 50000)
2)fileld to field assignment is not proper:
u need to check if there is any source field with lenth lets say 5 ans is getting assisgned to a target field length lets say 4.in this case dumps will come
please check the error message in st22 and here you can also check the termination point.please check in option Chosen variables /contents of system fileds where you can get temp values at point of termination.here you can pinpoint values at which prog is throwing dumps.

Short dump while running Payroll

Dear Experts,
I am getting short dump while running the payroll for around 150 employees, but am not able to see the short dump also as it says that "process terminated".
please help me in this regard and also let me know if there could be any configuration errors.
Regards
Shansar

Thank you all for the response.
The issue has been resolved. i have learnt that log field should not be flagged when you are executing payroll for more than 50 employees.
Regards
Shansar

Problem in accessing the table

Hi,
My database in 10g (10.2.0.4), I have created one user TEST and given insert,update,delete on ABC table to TEST from XYZ user.
Also,
Grant select any table to test;
but when i connect with test and accessing tables of xyz it is showing error 'table or view does not exist' and i select the table with xyz.abc then i can select the table of xyz.
I do not want to create any synonyms for this table. Can you please help while accessing the table from TEST user without username.tablename
Anand

Anand Vyas wrote:
Actually i have given the example of one table but i have given grant on many table to TEST user.
Also end user uses these tables in application and he can not agree to set alter session in his application.
Is there any way to access the tables of XYZ which i have given the grant to TEST without username.tablename means xyz.abc
Thanks in advance.
AnandGiven your other requirements/restrictions, your only option is to create a synonym. Why do you not want to do that? If you have many of them, you can "write a sql to write a sql"
spool doit.sql
select 'create or replace public synonym ' ||
           table_name ||
           ' for xyz.' ||
           table_name ||
from dba_tables
where owner = 'XYZ';
spool off

Short dump while accessing the table

Similar Messages

Maybe you are looking for