Error: Get Start Frame is undefined

Hello,
RH 7: Webhelp output (primary layout: HTML). When I generate the help and then launch to view, I get the Internet Explorer Script error: WH_MSG_GETSTARTFRAME is undefined. Then, other topics display the error: Object Expected.
Any ideas? Thanks!

Hi
I understood your concern. Just try to do the same with a new project (like a small help file) and see that are you facing the same issue?

Similar Messages

RoboHelp 11 - When previewing topics from within the project, a script error displays: 'HHComponent Activator' is undefined. How do you get rid of this script error?

RoboHelp 11
When previewing topics from within the project, a script error diplays: 'HHComponent Activator' is undefined.
How do you get rid of this script error?

Hi there
Have you tried clicking Help > Updates and applying the service release?
If not, I'd start with that.
Cheers... Rick

When trying to work with Agilent 34401A multimeter (serial RS-232 connection), HP34401A Getting Started.vi gives always the message: "Error 1073807369 occurred at Old VISA Open ".

Baud rate and parity are set correctly, RS-232 cable is also connected correctly. My QuickBasic program has no problems to read and write to the Multimeter. It is obviously a software problem: the same error is persistent if I disconnect RS-232 cable.
I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm digital.ni.com and installed it. But it did not help.
Thank you in advance
Best regards
Alexei Soloviev

Hi Steve
I have problems with the 34401A and serial communication. Do you remember
where the error was in the code ?
Thanks
Klaus
wrote in message
news:[email protected]..
> Alexei,
> This may or may not help, I was tasked to do something similar
> recently and found an error in their driver. The GPIB VISA worked
> fine, but when I tried it on serial it played up. There was an errant
> carriage return (or CR/LF I can't remember). GPIB liked one and Serial
> liked the other. It always amuses me that we never have problems with
> Quickbasic!.
> If you want me to dig deeper give me a shout.
>
> Steve Watts
>
> On Thu, 24 Jan 2002 06:16:55 -0800 (PST), "Alexei V. Soloviev"
> wrote:
>
> >When trying
to work with Agilent 34401A multimeter (serial RS-232
> >connection), HP34401A Getting Started.vi gives always the message:
> >"Error 1073807369 occurred at Old VISA Open ".
> >
> >Baud rate and parity are set correctly, RS-232 cable is also connected
> >correctly. My QuickBasic program has no problems to read and write to
> >the Multimeter. It is obviously a software problem: the same error is
> >persistent if I disconnect RS-232 cable.
> > I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm
> > digital.ni.com and installed it. But it did not help.
> >Thank you in advance
> >Best regards
> >Alexei Soloviev
>

Getting error while starting the server.

I am getting the following error while starting the server. Please help
trc file: "C:\SAP\JP1\JC00\work\dev_jstart", trc level: 1, release: "710"
sysno      00
sid        JP1
systemid   560 (PC with Windows NT)
relno      7100
patchlevel 0
patchno    0
intno      20063500
make       multithreaded, Unicode, optimized
profile    C:\SAP\JP1\SYS\profile\JP1_JC00_EmpMXMobile
pid        2240
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, JM
arguments :
arg[ 0] : C:\SAP\JP1\SYS\exe\run\jstart.exe
arg[ 1] : pf=C:\SAP\JP1\SYS\profile\JP1_JC00_EmpMXMobile
F
F [Thr 3540] Tue Sep 04 20:55:33 2007
F [Thr 3540] SfCJdkConfig::get: JDK home directory is set by profile
F [Thr 3540]      Java home: C:\SAP\JP1\SYS\exe\run\sapjvm_5
F [Thr 3540] SfCJdkConfig::get: Java VM type is set by profile
F [Thr 3540]      Java VM type: server
F ********************************************************************************
F Java SDK properties (C:\SAP\JP1\JC00\work\jstart.jdk)
F    root directory    : C:\SAP\JP1\SYS\exe\run\sapjvm_5
F    vendor            : SAP AG
F    version           : 1.5.0_07-b00
F    cpu               : x86
F    java vm type      : server
F    jvm library name : jvm.dll
F    library path      : C:\SAP\JP1\SYS\exe\run\sapjvm_5\jre\bin\server;C:\SAP\JP1\SYS\exe\run\sapjvm_5\jre\bin
F    executable path   : C:\SAP\JP1\SYS\exe\run\sapjvm_5\bin
F ********************************************************************************
I [Thr 3540] MtxInit: 30002 0 2
F [Thr 3540] JsfCreateShm: ShmCreate(79, 4096, ATTACH) failed (rc = 3 SHM segment doesn't exist)...
F [Thr 3540] SfCInstanceManager::newState: starting run level 1.
F [Thr 3540] *** ERROR => SfICreateFiElem: FiInit(JSF-FI-BRSESS, 1, 32) failed (rc = 6 invalid argument) [jsfxxshm.c   1909]
F [Thr 3540] *** ERROR => SfEInternalError: SfCInstanceManager::createDynShm: JsfCreateDynShm failed (rc = 1 general error) [sfxxinst.hpp 349]
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App       : jstart.exe (pid=2240)
When      : 9/4/2007 20:55:34.296
Threads   : 2
Computer Name       : EMPMXMOBILE
User Name           : SYSTEM
Number of Processors: 2
Processor Type: x86 Family 6 Model 15 Stepping 6
Windows Version     : 5.1 Current Build: 2600
Stack Dump for Thread Id dd4
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0006f784 00000000 7c8025cb 00000000 00000604 00000000 ntdll!KiFastSystemCallRet
0006f7fc 00000000 004385ac 00000000 00000604 00000000 kernel32!WaitForSingleObject
0006f820 00000000 0044aeee 00000000 0044af27 00000000 jstart!_STL::basic_ostream<wchar_t,_STL::char_traits<wchar_t> >::operator<<
0006fa40 00000000 7c9106eb 00000000 78134d85 00000000 jstart!_STL::basic_ostream<wchar_t,_STL::char_traits<wchar_t> >::operator<<
005b36b8 00000000 00000000 00000000 00000029 00000000 ntdll!RtlAllocateHeap
Stack Dump for Thread Id dd8
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0172feac 00000000 7c8314a6 00000000 00000674 00000000 ntdll!KiFastSystemCallRet
0172ff74 00000000 781329b9 00000000 00000000 00000000 jstart!FcaConnection_fcaCloseOutput
0172ffac 00000000 78132a45 00000000 7c910738 00000000 MSVCR80!endthreadex
0172ffec 00000000 00000000 00000000 781329df 00000000 MSVCR80!endthreadex
F
F [Thr 3540] Tue Sep 04 20:55:34 2007
F [Thr 3540] SfCOptions::doExit: goodbye... (exitcode 1, retcode 1)

Hi Viji,
            It seem's some memory(RAM) problem is strucking, can you try to shut down the OS and try to start the server?
Regards,
Hari.

Getting error while starting weblogic server in jdeveloper

getting an error while starting weblogic server in jdeveloper
IN LOG(its shows following):
<Jul 25, 2013 7:19:15 PM IST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Jul 25, 2013 7:19:15 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Jul 25, 2013 7:19:15 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
User 'principals=[weblogic, Administrators]' has administration role. All tasks by adminstrators must go through an Administration Port.
**** Authentication error while connecting to application server IntegratedWebLogicServer. Please check settings.
**** Failed to complete start-up of application server IntegratedWebLogicServer.
[Server Instance IntegratedWebLogicServer is shutting down. All applications currently running will be terminated and undeployed.]
[Forcing termination of IntegratedWebLogicServer]
taskkill /F /PID 1620
Process exited.
PLs help me

User, please tell us your jdev version!
Somehow your credentials are corrupted. Two possible solution:
1) open your system11.1.1.xxxx folder open the DefaultDomain\servers\DefaultServer\security folder and edit the boot.properties file. Remove the '(AES)...' part after username and password and write the new ones e.g. username=weblogic', password='Welcome1'. Save the file and try to start the integrated server again. Once the server starts the entries are encoded again.
2) if 1) does not work, remove the whole DefaultDomain folder and create a new WLS instance inside jdev.
Timo

Error, in Getting started with Labview. Chapter 3, part 4.

Hi.
Still struggling on, trying to find the time to work through the "Getting Started with LabVIEW" document.
Only 19 days left to go, and I'm still only in chapter 3!...
Right. In the "Saving Data When Prompted by a User" exersise, part 4...
4.   Right-click the Signals input of the Write To Measurement File
      Express VI and select Insert Input/Output from the shortcut menu to
      insert the Comment input.
Problem is, that option is greyed out, so not available!...
I did what the instructions said, I right clicked on the "Signals" input, and it doesnt do what it says on the tin!
Any pointers?   Please don't mention search the help, I've crashed the entire LV environment 3 times now, trying to search for something in there. It's OK if it finds someting, but it seems to bomb at times, when there is some ambiguity when searching.
Also, I won't be able to do anyting with any replies for a day or two, as I have to go up country to a customer, and mess about with hot oil, high volts, and lots of RF. It never ends.   (I've still got the day job to do, while trying to fight my way through this "evaluation". 30 days of "Use" would be better, than 30 calendar days for some of us.)
Regards.
Dave Baxter.
Technical Manager: AR-UK Ltd.
AR United Kingdom
OK... Who let the smoke out?

Hi Dennis, and everyone else..
That is not how it looks when first dropped on the BD. On my machine, it is partialy expanded by default, after you clear the Configure dialog that pops up ocupying most of the screen.
Again, if it makes a difference to the way the Right Click shortcut menu works, it should be documented in the Getting Started document, especialy as it seems to be a critical point.
OK, explain this...
I've just rubbed out the save to file VI, cleaned up the broken wires etc, and then planted a new one on the BD. Once I cleared the Configure dialog that covers up most of the screen before you see it the first time, the VI was partialy expanded. I forget the exact list, but "Signals" was not at the top.
I did *EXACTLY* the same again, deleted it, cleaned up, and then planted a fresh new one. That DID appear that time with nothing but the "Signals" item showing, and two down caretts below that, indicating more items.
So......
Why the different behaviour each time, on the same BD, in the same session. Some underlying working data not being correctly initialised when invoked? Of course, that never happens, right? ('C' programmes eh?)
Trying some more, it seems the behaviour loosley depends on just how close to the edge of the While loop grey border you place it.   Odd.   I have a 1280x800 screen to play with, and a 1280x1024 second screen I use for the Getting Started document. That is the absolute maximum I can have, due to hardware limits.
I also find, that if you fully expand the "Write to Measurement File" VI block, then fully collapse it, then expand it again, all the items in that list have changed places! Why?
I had noticed earlier that there is no uniformity in the layout of even the items common to many if not all VI blocks (error in, and error out to name but two) Sometimes one is above the other, sometimes the other way round, sometimes they are not even ajacent to each other. Has that been done as a source of minor ammusement or something?
Talking to another colegue here, who just wandered in to see how I was getting on with this. Seems he also has tried the introductory entry into LV (V8.something) in the past. But he too, found too many things that behaved differently from one time to another, so abandoned it as a lost cause, then decided to learn how to use Visual Basic with NI-GPIB IO instead.   Not without issues either he said, but at least it all behaves exactly the same, each and every time.
End of the day now...
Regards.
Dave B.
OK... Who let the smoke out?

Error " The callback function , ReturnCallback specified in the UIR file , is not a known function" from sample7 created using Getting Started With Teststans

In the Getting Started Manual Chapter 6 is a CVI project to create a DLL frequency.prj. I tried various settings in the Build Target settings in CVI (6.0) but still get the same error. Using TestStand (2.0)
Thanks for any help
Attachments:
frequency.c ‏3 KB

Hi Ray
Thanks for the response. I realized after posting that my question may be too general to help you understand my problem
I followed the instructions in the manual and from the UIR inserted the callback for the frequency.c and was also added to the
frequency.h file
Later I got it to work using the file in the solutions directory but for the life of me I still cannot see why that worked and mine didnt
A couple of things about my file that I still cant explain is
1) I had to enter an abslute path to the uir itherwise I got a file not found error.
2) I had to add a variable as follows
static void *_CVIUserHInst;
otherwise it gave an error for that part of the exOpenPanel fuction.
I am attaching the file that works in case you are willing to take time and see if YOU can tell why one works and the other does not.
I dont like it when I cant tell why the results are different( always good to know why).
Thanks
Mario
Attachments:
frequencyWorks.c ‏3 KB

Getting an error 'CalendarNotify' as null or undefined in the code at SP.UI.ApplicationPages.CalendarNotify line in SharePoint 2013 after migration

Hello,
I am getting an error 'CalendarNotify' as null or undefined in the code at SP.UI.ApplicationPages.CalendarNotify in SharePoint 2013 after migration from SharePoint 2010. The SharePoint calendar is customized to display the events with colors and other
customizations.
It was developed in SharePoint 2010 using client side objects /jquery. After migration to 2013 stopped working.
The code looks like in the following url...
http://www.westpoint.edu/news/SiteAssets/ColorCoding.txt
Thanks in advance.

Hi,
According to your description, my understanding is that the CalendarNotify is null after migrating to SharePoint 2013.
I suggest you can check if the sp.js has been loaded properly using Internet Explorer Developing Tools. We can use the following script to run function after the sp.js has been loaded.
ExecuteOrDelayUntilScriptLoaded(somefunction(), "sp.js");
Here is a detailed article for your reference:
http://msdn.microsoft.com/en-us/library/jj193034.aspx
Best Regards
Zhengyu Guo
TechNet Community Support

Getting "the procedure entry point CGImageRelease could not be located in the dynamic link library CoreGraphics.dll" error when starting Itunes. Haved reloaded many times and still the error.

Getting "the procedure entry point CGImageRelease could not be located in the dynamic link library CoreGraphics.dll" error when starting Itunes. Haved reloaded many times and still the error.

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes

Getting error on starting the osb10.3.1

Hi all,
I have installed OSB10.3.1. i have only configured Admin server and there is no managed servers. When I start the admin server it gets started but after a few seconds it gives the following error.
[ERROR] AdapterManager - ServletContainerAdapter manager not initialized correctly.
Java HotSpot(TM) 64-Bit Server VM warning: Exception java.lang.OutOfMemoryError occurred dispatching signal SIGINT to handler- the VM may need to be forcibly terminated
Exception in thread "Timer-1" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[STANDBY] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "DoSManager" java.lang.OutOfMemoryError: PermGen space
Java HotSpot(TM) 64-Bit Server VM warning: Exception java.lang.OutOfMemoryError occurred dispatching signal SIGINT to handler- the VM may need to be forcibly terminated
Exception in thread "[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[STANDBY] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Can anyone suggest what can be the issuue with this.
Thanks in Advance!!

Hi Viji,
It seem's some memory(RAM) problem is strucking, can you try to shut down the OS and try to start the server?
Regards,
Hari.

Getting error while starting managed recovery

Hi,
I am getting error while starting managed recovery.Please suggest.
Please find below error log
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION
Attempt to start background Managed Standby Recovery process (OTP3)
Wed Jun 23 19:24:10 2010
MRP0 started with pid=50, OS id=3350
MRP0: Background Managed Standby Recovery process started (OTP3)
Fast Parallel Media Recovery enabled
Managed Standby Recovery not using Real Time Apply
Warning: Recovery target destination is in a sibling branch
of the controlfile checkpoint. Recovery will only recover
changes to datafiles.
Datafile 1 (ckpscn 296765005228) is orphaned on incarnation#=1
MRP0: Background Media Recovery terminated with error 19909
Errors in file /ora/app/oracle/admin/OTP3/diag/rdbms/otp3/OTP3/trace/OTP3_mrp0_3350.trc:
ORA-19909: datafile 1 belongs to an orphan incarnation
ORA-01110: data file 1: '/ora_ots_gdb1/oradata/OTP3/datafile/o1_mf_SYSTEM_REORG1_.dbf'
Errors in file /ora/app/oracle/admin/OTP3/diag/rdbms/otp3/OTP3/trace/OTP3_mrp0_3350.trc:
ORA-19909: datafile 1 belongs to an orphan incarnation
ORA-01110: data file 1: '/ora_ots_gdb1/oradata/OTP3/datafile/o1_mf_SYSTEM_REORG1_.dbf'
MRP0: Background Media Recovery process shutdown (OTP3)
Completed: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION

Hi,
The standby database has been activated previously but since then reverted back into its standby role. Prior to the
RMAN duplicate operation the "alter system reset control_files scope=spfile sid='*';" has not been executed (i.e. the
control files have not been overwritten).
check the incarnation on both the sides i.e primary & standby
list incarnation of database;
RMAN> reset database to incarnation 2;
database reset to incarnation 2
RMAN> exit
hope you can solve by restting the incarnation.
Thanks

Getting error while starting my second database

Hi to all,
I have a problem of getting start of Enterprise manager of my second database:-
I create another database on same machine & after creation i restart my laptop & start listener & dbconsole but after this i am not able to login in Enterprise Manager of my second database whose url is:
http://localhost.localdoamin:5500/em.
I am able to connect my first database through Enterprise managaer.But when i try to connect my second database it show me error:-
error:-”*CANNOT ESTABLISH THE CONNECTION WITH LOCALHOST.LOCALDOMAIN”*
I am using Linux operating system
I donot understand what is the problem.
Please help me.

I have a problem of getting start of Enterprise manager of my second database:-
I create another database on same machine & after creation i restart my laptop & start listener & dbconsole but after this i am not able to login in Enterprise Manager of my second database whose url is:
http://localhost.localdoamin:5500/em.
I am able to connect my first database through Enterprise managaer.But when i try to connect my second database it show me error:-
error:-”*CANNOT ESTABLISH THE CONNECTION WITH LOCALHOST.LOCALDOMAIN”*
I am using Linux operating system
I donot understand what is the problem.Your subject line is not correct. It should be "Unable to open OEM for second database". Any way post the status the second database's OEM status. Post the output of following command, please copy paste the exact command you fired.
$export ORACLE_SID=<second SID>
$emctl status dbconsole
Regards.

Getting error while starting the RAC instance through SRVCTL utility

Hi DBA's,
We are getting the below error while starting the Orcale 10g RAC instance on one of the node thru SRVCTL:
oracle:/home/oracle]>srvctl start instance -d SQLTSTM2 -i SQLTSTM21
PRKP-1001 : Error starting instance SQLTSTM21 on node r1racd
CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.SQLTSTM2.SQLTSTM21.inst' has placement error.
:oracle:/home/oracle]>
srvctl status database -d SQLTSTM2
PRKO-2015 : Error in checking condition of instance on node: r1racd
Instance SQLTSTM22 is running on node r2racd
oracle:/opt/oracle/product/10.2.0/db]>
NOTE: but i am able to start the instance thru SQLPLUS.
After starting the instance thru SQLPLUS i checked the CRS_STAT -t . It shows the status offline... Please find the details below:
Name Type Target State Host
ora....21.inst application OFFLINE OFFLINE
ora....22.inst application ONLINE ONLINE r2racd
ora....VLM2.db application ONLINE ONLINE r2racd
ora....21.inst application ONLINE ONLINE r1racd
ora....22.inst application ONLINE ONLINE r2racd
ora....STM2.db application ONLINE ONLINE r2racd
ora....SM1.asm application ONLINE ONLINE r1racd
ora....CD.lsnr application ONLINE ONLINE r1racd
ora.r1racd.gsd application ONLINE ONLINE r1racd
ora.r1racd.ons application ONLINE ONLINE r1racd
ora.r1racd.vip application ONLINE ONLINE r1racd
ora....SM2.asm application ONLINE ONLINE r2racd
ora....CD.lsnr application ONLINE ONLINE r2racd
ora.r2racd.gsd application ONLINE ONLINE r2racd
ora.r2racd.ons application ONLINE ONLINE r2racd
ora.r2racd.vip application ONLINE ONLINE r2racd
Thanks in advance...
Anil

Use the 'srvctl config database -d ' command to check if the instance has been configured in the Oracle Cluster Registry; make sure that the GSDs are running on each node in the cluster.
Also refere to Metalink note 295328.1

Getting Error while starting JDeveloper - "An unexpected severe error"

Getting Error while starting JDeveloper - "An unexpected severe error has occurred in JDeveloper".
Its asking for exit after saving files. Below is the stack trace.
I am using Jdeveloper 11.1.1.3, The latest version. and i installed most of the updates available in Check updates section.
oracle.classloader.util.AnnotatedNoClassDefFoundError:
     Missing class: oracle.portlet.client.connection.web.WebProducerConnection
     Dependent class: oracle.webcenter.internal.dt.config.ConnectionContextListener
     Loader: ide-global:11.1.1.0.0
     Code-Source: /D:/oracle/Middleware2/jdeveloper/jdev/extensions/oracle.webcenter.common.jar
     Configuration: extension jar in D:\oracle\Middleware2\jdeveloper\jdev\extensions
The missing class is not available from any code-source or loader in the system.
o.classloader.PolicyClassLoader.handleClassNotFound(PolicyClassLoader.java:2200)
o.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1733)
o.classloader.PolicyClassLoader.access$000(PolicyClassLoader.java:143)
o.classloader.PolicyClassLoader$LoadClassAction.run(PolicyClassLoader.java:331)
j.security.AccessController.doPrivileged(Native Method)
o.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1692)
o.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1674)
j.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
o.webcenter.internal.dt.config.ConnectionContextListener.<clinit>(ConnectionContextListener.java:81)
o.webcenter.internal.dt.addin.WebCenterFrameworkAddin$1.rescatContextRegistered(WebCenterFrameworkAddin.java:237)
o.j.rescat2.RescatContextRegistry.notifyContextRegistered(RescatContextRegistry.java:328)
o.j.rescat2.RescatContextRegistry.registerContext(RescatContextRegistry.java:93)
o.adf.share.dt.AppConnContext.getRescatContext(AppConnContext.java:221)
o.adf.share.dt.ApplicationConnectionsNode.applicationChanged(ApplicationConnectionsNode.java:94)
o.j.appresources.ApplicationResourcesWindow.notifyApplicationChanged(ApplicationResourcesWindow.java:298)
o.j.appresources.ApplicationResourcesNode.applicationChanged(ApplicationResourcesNode.java:66)
o.j.appresources.ApplicationResourcesWindow.applicationChanged(ApplicationResourcesWindow.java:236)
o.i.navigator.ApplicationNavigatorWindow.fireApplicationChangeEventImpl(ApplicationNavigatorWindow.java:990)
o.i.navigator.ApplicationNavigatorWindow.fireApplicationChangeEvent(ApplicationNavigatorWindow.java:974)
o.i.navigator.ApplicationNavigatorWindow.access$200(ApplicationNavigatorWindow.java:100)
o.i.navigator.ApplicationNavigatorWindow$1L.itemStateChanged(ApplicationNavigatorWindow.java:263)
jx.s.JComboBox.fireItemStateChanged(JComboBox.java:1205)
jx.s.JComboBox.selectedItemChanged(JComboBox.java:1262)
jx.s.JComboBox.contentsChanged(JComboBox.java:1309)
jx.s.AbstractListModel.fireContentsChanged(AbstractListModel.java:100)
jx.s.DefaultComboBoxModel.setSelectedItem(DefaultComboBoxModel.java:88)
jx.s.JComboBox.setSelectedItem(JComboBox.java:557)
jx.s.JComboBox.setSelectedIndex(JComboBox.java:603)
o.i.navigator.ApplicationNavigatorWindow.initSelectedApplication(ApplicationNavigatorWindow.java:1135)
o.i.navigator.ApplicationNavigatorWindow.initToolbarArea(ApplicationNavigatorWindow.java:1035)
o.ideri.navigator.DefaultNavigatorWindow.initCommonItems(DefaultNavigatorWindow.java:384)
o.i.navigator.ApplicationNavigatorWindow.getGUI(ApplicationNavigatorWindow.java:695)
o.i.docking.DockableWindow.getHostedComponent(DockableWindow.java:231)
o.ii.docking.TitledPanelHolder.getOrCreateComponent(TitledPanelHolder.java:47)
o.ii.docking.TitledPanel.setPageVisible(TitledPanel.java:881)
o.ii.docking.TitledPanel.showClient(TitledPanel.java:858)
o.ii.docking.TitledPanel.setClientVisible(TitledPanel.java:841)
o.ii.docking.TitledPanel.setClientVisible(TitledPanel.java:819)
o.ii.docking.TitledPanel.loadVisibilityLayout(TitledPanel.java:1789)
o.ii.docking.DockPanel.loadVisibilityLayout(DockPanel.java:200)
o.ii.docking.AbstractDockPanelHost.loadVisibilityLayout(AbstractDockPanelHost.java:94)
o.ii.docking.DockStationImpl.onStartup(DockStationImpl.java:1634)
o.ii.docking.DockStationImpl.loadLayout(DockStationImpl.java:1473)
o.ii.docking.DockStationListener.init(DockStationListener.java:36)
o.i.layout.Layouts.activate(Layouts.java:812)
o.i.layout.Layouts.activateLayout(Layouts.java:192)
o.ii.MainWindowImpl$6.runImpl(MainWindowImpl.java:728)
o.javatools.util.SwingClosure$1Closure.run(SwingClosure.java:50)
j.a.event.InvocationEvent.dispatch(InvocationEvent.java:199)
j.a.EventQueue.dispatchEvent(EventQueue.java:597)
j.a.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
j.a.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
j.a.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
j.a.EventDispatchThread.run(EventDispatchThread.java:122)

I did in this way.See the error message first.Try to understand the error and find out the extension name which is causing this problem.Go to tools-preferences-extensions and uncheck the respective extension and restart the jdeveloper.
If still this problem exists,go to <jdeveloper home>\jdev\extensions,close the jdeveloper app,delete the respective extension jar file and start jdeveloper.Thanks.

Getting error while starting DB services.

Hello,
I made a mistake while starting DB Services.
Instead of starting DB services with ORACLE user I tried to start it with ROOT user and got Insufficient Privileges error.
Now when I am trying to start it with ORACLE user I am getting Listener error. Listener is not getting start.
Please tell me what to do
Thanks & Regards,
Ajay Sharma

AjaySharma wrote:
Hello,
I made a mistake while starting DB Services.
Instead of starting DB services with ORACLE user I tried to start it with ROOT user and got Insufficient Privileges error.
Now when I am trying to start it with ORACLE user I am getting Listener error. Listener is not getting start.
Please tell me what to do
Thanks & Regards,
Ajay Sharma
> I am getting Listener error
ERROR?
What Error?
I do not see any error.
my car won't go.
tell me how to make my car go.
How do I ask a question on the forums?
https://forums.oracle.com/message/9362002#9362002

Error: Get Start Frame is undefined

Similar Messages

Maybe you are looking for