Error handling in server proxy - triggering email

Hi,
i have WS->XI->CRM scenario.
i am using server proxy at CRM side.
I want to hadle errors in ABAP server proxy.
i am using fault message and collecting and raising the error.
Everything is fine.
But to know the error i have to come SXMB_MONI of CRM.
But in real scenario how it works. some one will not come and see every time.
How to notify ( may be triggering email ) some one in the organization if some error occurs in SXMB_MONI.
Is there any automatic method?? if yes, how to do that.
Thanks in advance...

Configure alerts
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9418d690-0201-0010-85bb-e9b2c1af895b
U may also use CCMS monitoring
/people/sap.india5/blog/2005/12/06/xi-ccms-alert-monitoring-overview-and-features
Regards,
Prateek

Similar Messages

Very urgent...Getting errors in web server proxy

Hi,
We have 5 Glassfish server to fullfil the Http requests and one sun web server proxy for load balancing.
But we are getting the following errors in web server proxy logs:
+1. service-http reports: HTTP7766: error reading response header (IO timeout error)+
+2. service-http reports: HTTP7766: error reading response header (Connection reset by peer)+
+3. set-origin-server reports: HTTP7751: server <ip-address>:<port> offline+
+4. set-origin-server reports: HTTP7751: server 10.76.177.88:8083 offline+
Please do let us know reason of the above errors and if we need to change any configuration settings.
We are working on a very critical project. Please reply ASAP.
Thanks and Regards,
Project Team

Hey is that u r using connection pool.
Check for number of connection in the Oracle Server opened.
Check up number of connection persist both in oracle/java.
Is driver not crashed or jvm right.
Shyam

Error handling in abap proxy

Hi,
In my scenario, I have written code in the execute_synchronous method of the abap proxy in ECC. I want to capture all possible errors that might occur here and for all of them i want to capture the message id and the text and send it out. what kind of possible errors/exceptions can occur and how to handle them. My proxy class simply selects data from multiple tables in ECC and returns the same.
thks

Hi,
for outbound proxies the error handling should be done within R3 itself and there is no need to send errors to XI or receiving system for that matter. You would want someone from R3 side to take a note of it.
For Inbound proxies, you will have to implement the Fault messages
Fault message types are designed for application-specific errors that occur on the inbound side and that are reported back to the sender or persisted in monitoring.
· In the synchronous case, when an application-specific error occurs on the inbound side, instead of sending a response message back to the sender, the application can send a fault message to handle the error.
· The fault message of the application for an asynchronous ABAP server proxy is persisted for monitoring. In the case asynchronous of Java server proxies, the fault message is part of a negative application acknowledgement (see Acknowledgments).
Application-specific means that the application on the inbound side triggers the error itself because, for example, the request message did not contain sufficient information.
For more information on the same.
http://help.sap.com/saphelp_nw04s/helpdata/en/dd/b7623c6369f454e10000000a114084/frameset.htm
In your case, since you said that you are selecting data from some tables, the possibility is that an entry is not found in the DB tables you will have to simply populate the fault message data and raise an expection CX_FM. It also depends on what error handling requirements from the Business .
regards,
Advait.

Error Handling for ABAP Proxy sender

Hello Everyone,
I am trying out a scenario of SAP R/3 to Oracle database (ABAP Proxy to JDBC).
I have the following code and it works fine.
CALL METHOD prxy->execute_asynchronous
      EXPORTING
        output = it.
     commit work
CATCH cx_ai_system_fault .
    DATA fault TYPE REF TO cx_ai_system_fault .
    CREATE OBJECT fault.
    WRITE :/ fault->errortext.
I know that the above Catch block would be used to handle system errors on the sender side.
Please tell me what kind of errors could these be and what I can do to test these errors. ie. I want to create error situations explicitely and see how they are handled.
Thanks and Regards,
Ashwin

Thanks guys, this was useful.
My scenario is for Asynchronous communication.
I guess Fault messages are used in case of Synchronous communication for handling application errors. So if there was something wrong at the JDBC end then I could use the fault messages.
Have i got this right?
I also came across this piece on Acknowledgements. But is says that they can be used with the following Receivers:
The following receivers support acknowledgments:
ABAP and Java proxies (XI 3.0 SP1 for the latter)
Integration processes
IDocs (note that IDocs only return acknowledgments when they have been configured using the ALE audit)
Receiver adapters support system acknowledgments but not application acknowledgments
My Receiver is JDBC. So I guess I cannot use acknowledgements either.
Hence, I need to know what I can do to replicate the system errors eg. failed server etc...so that I can get catch these errors during sending.
I'll tell you abt what happened earlier.
My XI server was down. I executed the code for the sender ABAP Proxy and it did not catch the error. In SXMB_MONI in the R/3 system, I could see the messages queued up. When the XI server started, the messages were transferred to XI.
I need to handle such errors...ie. If the server is down or message did not reach XI then my ABAP program that sends data via ABAP proxy needs to know that something went wrong.
Thanks and Regards,
Ashwin

Error in Java Server Proxy 7.1

Hi,
i am working on Java Server Proxy in PI 7.1, i am able to deploy EAR file successfully.
when i am execting the scenario i am getting the following error
JPR could not process the message. Reason: No remote bean found for reference of class $Proxy2917.
can any one help me to resolve this issue.
if there is any Blog or documentation on Java proxy PI 7.1, can you please share with me.
Thank You,
Madhav

Hi Madhav,
i think you are facing error because you not defined you bean class peopely,and check the configuration of J2EE-engine.xml file .
refer the link
http://help.sap.com/saphelp_nwpi71/helpdata/EN/ce/81a797cc9642c8bbef249bfd84dd45/content.htm
Regards,
Raj

Error handling workflow not getting triggered

Hi all,
I'm creating a outbound IDoc. And for error handling workflow.. I created a organization structure in PPOME and assigned users. I gave this position number thus created in the partner profile in post processing permitted agent tab.
But when the Idoc is in error, this is not coming to my inbox.
Can someone please help me with this.. and let me know what went wrong.
Thanks in advance.

Here you need to be careful,
if the agent assignment is not maintained properly, there may be a chance everyone in the organization will get the item.
I hope you have created a single workitem for error handling. goto additional data-> agent assignment-> maintain. make sure the attribute is defined as general forwarding allowed. or you maintain the role/position/user/whatever.as the possible agents. still you dont get the result, debugging the default rule in the task ->default rule -> agent.
hope this helps.
with regards,
Sudhahar R

Error in Java Server Proxy in PI 7.1

Hi Gurus,
Can you please help me whether for Java server Proxies ,registration of interfaces are required or not in PI 7.1? I am using one synchronus interface(stateless).I have developped the proxy by connecting the ESR from NWDS and generating the Java skeleton from that interface.It is deployed and I tested the WSDL also after creating the service endpoint.It is running fine.
But while trying to use that proxy in an end-to-end scenario and triggering the msg from RWB->integration engine,even after registering it is giving the error "Cannot locate proxy bean localejbs/sap.com/JavaProxyServer/CalculatorImplBean"
Is it also requirred in PI 7.1 to register the interface?If not,the what should be the next step?
Thanks,
Jaydeep

Hi,
I am working on java proxy PI7.1.
I have follwed the steps provided in the below link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/508bb504-87cf-2c10-2aaf-f3a5df75e651?quicklink=index&overridelayout=true
I have Generates an outbound JAX-WS proxy based on the WSDL document.
And i didnt get the further steps.
Please advice me how to deploy the java proxie.
Thanks,
Sabitha

Error in abap server proxy

hi all here i am facing some problem regarding proxies. here my scenario is file-to- ABAP proxy. when i trigger message it is giving checkered flag in XI where as in receiver side it is showing error as below by giving red flag.
another important thing is the Z table is getting updated. but it is giving error in sxmb_moni of receiver side by red flag. please respond.
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>ZCL_INBOUND_INTERFACE</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Regards,
Ramana.

Hi Ramana,
there is an runtime error at your proxy. Look to transaction ST22 for details. To find out, what happend follow Stefans blog <a href="/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation: Debug your inbound ABAP Proxy implementation</a>
Regards,
Udo

An error Handling in Asynchronous Proxy to JDBC Scenario?

Hey,
In my scenario, we'll send data from erp to third-party database.
If it occurred an error while saving the data to database, I want to manage that error in ERP.
Is it possible to make this scenario with asynchronous proxy to JDBC?
If it was possible, how should do I?
Thank you,

Also
go thru the following thread (Similar problem discussed)
Re: RFC to JDBC response
regards
krishna

How to create a generic error handling proxy?

Hello,
i have few services proxies.
I want to create a generic error handling osb proxy which does only errorhandling.
This proxy would be called by all my services.Now suppose my services proxies would throw any error,the control will pass to error handling block of proxy..from there i will call this generic errorhandling proxyusing a service callout or publish action.In this proxy i want to do all my error handling based on 'n' conditions.and i want to pass the message to the fault variable of services proxy..kindly suggest ways..*main challenge is passing the message to the fault variable of services proxy*

Hi,
For generic error handling framework or common error handling framework...create a bpel process which takes the error details payload and sends the inf/data as email to the particular receipients.
create business process with bpel process and proxy using business service.so wen ever error occurs at stage or route or proxy level ..call error handler action in OSB.Assign error handler details to the bpel input payload.
FOR EX:
<soap-env:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<com:test>
<com:ProcessInfo>testDetails</com:ProcessInfo>
<com:BusinessProcessName>testprocess</com:BusinessProcessName>
<com:BusinessProcessInstanceId>{fn-bea:uuid()}</com:BusinessProcessInstanceId>
<com:BusinessProcessStep>ReqLayer</com:BusinessProcessStep>
<com:ErrorCode>{string($fault/ctx:errorCode)}</com:ErrorCode>
<com:ErrorType>Technical</com:ErrorType>
<com:StatusCode>Error</com:StatusCode>
<com:ImplementationCode>OSB</com:ImplementationCode>
<com:ErrorDescription>{string($fault/ctx:reason)}</com:ErrorDescription>
<com:ErrorDateTime>{fn:current-dateTime()}</com:ErrorDateTime>
<com:Node>{string($fault/ctx:location/ctx:node)}</com:Node>
<com:Path>{string($fault/ctx:location/ctx:path)}</com:Path>
</com:test>
</soap-env:Body>
this assign the error details values to the bpel process.

Exception caught if error is raised in Service Error Handler

Can any one help me on this? Im not able to understand the funda for the behaviour?
Proxy Service A calls proxy service B using Publish action. In proxyservice B - service error handler, Im raising an error with customised message. Proxy service B routes to another proxy service C which routes to Business service.
If my business service gives me timed out , error is handled at Proxy service C error handler , and again Proxy Service B error handler is invoked. Here my code stops where Im raising the error.
When I raise error in Service Handler where it is being caught?
Thank you in advance.
Regards,
Vyshnavi

Hi Vyshnavi,
There are four levels where you may define an Error Handler and it will catch errors related to this level only. If it could not handle any error reached to it, it will propagate the error to the higher level error handler. All errors which can not be handled at lower levels, System Error Handler, handles those.
To know more about this, please refer -
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/modelingmessageflow.html#wp1040161
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/modelingmessageflow.html#wp1128288
Regards,
Anuj

Osb - bind error handler to proxy service

Hi!
I have got a proxy service which polls a POP3 server to download emails and process them.
My question: How could I bind an error handler to proxy service for noticing when the POP3 server is not available?
So I would like to put an alert when the OSB looses the connection to email server. I tried to put an error handler to top component on message flow but it doesn't work...
Could anyone help me?
Thanks!
Viktor

For poller transports (email/File/FTP etc) it is not possible to catch errors of transport layer, in your service error handler. Re: OSB - Error Handler in FTP Transport for TransportException
Thanks
Manoj
Edited by: Manoj Neelapu on Jun 28, 2010 3:51 PM

Content Server Error Handler

I have an Intranet site let's say www.xyz.com and it has restricted access. So before anyone gets to the site, they have to be authenticated.
If a users press "Esc" for authentication(cancells Authentication), then the Site Studio Error handler is not triggered, but it returns a content server message
"Content Server Request Failed
Node access denied "
How can I customize this? - basically to add a custom message.
Pleast take a look the screen shot:
http://i28.tinypic.com/2i115t.jpg
Thanks in Advance.

Use the ExtranetLook component.
Regards
Jakub

Send a email while error handler Oracle Service bus 11g

I need to be send an email while error handler in proxy service message flow.
Error Handler Node -> stage -> report action
before or after report action, I need be to send a email
Could you please help this issue? I appreciate your help.
Thanks,
sdev

Add Alert to your Error Handler and set Alert Destination with your email set in.
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/operations/monitoring.html#wp1108089
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/consolehelp/alertdestinations.html

Report and Alert don't executed in the error handler with a JMS proxy service

Hi,
I'm working with OSB 11.1.1.4.0 and I'm facing a problem with the error handler of my JMS proxy service.
My error handler contains two main elements :
- a Report action
- an Alert with a JMS destination defined
When the business service failed the message remain in the queue. It's the expected behavior.
The problem is :
- the report is missing
- the alert is raised but missing in the JMS destination defined in the Alert setting.
I've noticed if I add a Reply with Failure or Success, Report and Alert are successfully executed.
Unfortunately the message don't remain in the JMS queue.
What can I do in order to have my report/alert done and the JMS transaction rollback in order to keep the message in the queue ?
I've already met this problem in the past with alsb v3 and my solution was to add Service Callout in the error handler in order to externalize these actions.
This solution is not convenient and I hope another solution is possible.

Inventorying workgroups can be difficult, especially when it comes to remote access and network security. Because workgroups are not centrally managed, some of the items discussed in this
wiki article on preparing your workgroup environment may require you to visit each machine individually.
For non-domain credentials, you do not use the <systemname>\<user> format, you simply enter the user name. Regarding how to enter the credentials, if you have an account that uses the same username and password on all machines and is an administrator
on all of those machines, then you can enter that in the All computers credentials page of the wizard. You can also do this if they are different user names. However, if some machines have an account with the same user name, such as Administrator,
but different passwords on each machine, you will need to use the Manually enter computer names discovery method, and then enter the information for each group or each machine.
As you can tell, workgroup environments can quickly negate any benefit that the agentless inventory nature of MAP provides.
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

Error handling in server proxy - triggering email

Similar Messages

Maybe you are looking for