Error in adding PRIMARY Data file of SQL Server 2005

Hi Experts,
I am using SQL 2005 as back end database for SAP ECC6. Due to Space problem in PRD data volume, i have added PRDDATA4.ndf file in SSMS ( SQL Server Management Studio) and saved. But, suddenly i got one more idea and extended the file size of exisiting PRDDATA1.mdf, PRDDATA2.ndf & PRDDATA3.ndf immediately i removed the PRDDATA4.ndf file before starting the service. But, while seeing in SAP using ST04 it showing the PRDDATA4.ndf with error message of file missing. What i have to do now? How can i delete the information showing in ST04. But it is not showing in SSMS.
Please help how to solve this.
Regards,
B.Sudharsan

Hi,
Following solution might help you to resolve the issue.
Solution1:
Issue happens because universe connection to the Database is not responding and the Data Source Name is not configured to write SQL Server 2005 database.
Resolution
Created new DSN connection under SYSTEM DSN to SQL Server 2005 Database.
Import the universe from the designer.
Go to File->Parameters.
Edit Connection.
On the Database Middleware Page expand SQl Server 2005->Select SQL Server 2005 driver.
Change the DSN to new DSN connection
Test the connection.
Save the Universe and Export it to the repository.
Solution2:
I am taking Oracle as an example over here.
This can be caused when the SQLNET.ora is located in a remote location using mapped drives.
Resolution
To resolve,
check the registry [HKLM\SOFTWARE\ORACLE] you should see a folder called HOME0
look for any paths that contain a mapped drive partition
Change the mapped drive letter to a UNC path (
server\folder)
Open a command prompt and do a tnsping using the tnsname and verify the location of the SQLNET.ora or TNSNAMES.ora
If the path is not updated to the new path
Reboot the server
Regards,
Sarbhjeet Kaur

Similar Messages

INSERTING DATA INTO A SQL SERVER 2005 TABLE, WHICH HAS A IDENTITY COLUMN

Hi All,
I have to insert the data into a SQL SERVER 2005 Database table.
I am able to insert the data into a normal SQL Server table.
When I am trying to insert the data into a SQL Server table, which has a identity column (i.e. auto increment column in Oracle) I am getting error saying that can't insert value explicitly when IDENTITY_INSERT is set to OFF.
Had anybody tried this??
There are some SRs on this issue, Oracle agreed that it is a bug. I am wondering if there is any workaround from any one of you (refer Insert in MS-SQL database table with IDENTITY COLUMN
Thanks
V Kumar

Even I had raised a SR on this in October 2008. But didn't get any solution for a long time, finally I had removed the identity column from the table. I can't to that now :).
I am using 10.1.3.3.0 and MS SQL SERVER 2005, They said it is working for MS SQL SERVER TABLE, if the identity column is not a primary key and asked me to refer to note 744735.1.
I had followed that note, but still it is not working for me.
But my requirement is it should work for a MS SQL SERVER 2005 table, which has identity column as primary key.
Thanks
V Kumar

Error when creating a FDM application on SQL Server 2005

Hi,
we are getting this error when creating a FDM application on SQL Server 2005
Error: EPMCSS-07003: Failed to validate identity. Invalid identity . Check identity.[SET_ROLES_LIST]
We are using Windows System Integration although we have also tested with sa user.
Any ideas?
Thanks

Based on the error message it appears to be having a Shared Services issue. Verify that the "ADMIN" account is being used for the HSS connection and that you are using "ADMIN" to create the application and see if the same error is returned.

Cannot set up data source for SQL Server 2005

Is it possible to use Microsoft's Beta 2 version of the SQL Server 2005 JDBC driver with WebLogic 9.0? I've downloaded the driver and added it to my server classpath, but when I try to create a new data source using the admin console, the drop-down list for Microsoft SQL Server only contains drivers for the 2000 version. If I select "Other" from the list and try to move on, I get a cryptic, page-long error on the admin console. If I just select the 2000 driver and try to manually modify the parameters on the next set of screens, I still get errors when I try to test the configuration. I've successfully used a third-party driver before, but this one does not seem to be working. Any help would be greatly appreciated.
Regards,
Sabrina

SabrinaL wrote:
Is it possible to use Microsoft's Beta 2 version of the SQL Server 2005 JDBC driver with WebLogic 9.0? I've downloaded the driver and added it to my server classpath, but when I try to create a new data source using the admin console, the drop-down list for Microsoft SQL Server only contains drivers for the 2000 version. If I select "Other" from the list and try to move on, I get a cryptic, page-long error on the admin console. If I just select the 2000 driver and try to manually modify the parameters
on the next set of screens, I still get errors when I try to test the configuration. I've successfully used a third-party driver before, but this one does not seem to be working. Any help would be greatly appreciated.
Regards,
SabrinaHere I describe the steps I took to bypass the console in making a new pool.
1 - Edit the script %DOMAIN_HOME%\bin\startWebLogic.cmd to add a line like this:
set CLASSPATH=%CLASSPATH%;\new_ms_driver\beta2\sqljdbc_1.0\enu\sqljdbc.jar
In other words, you have to explicitly add a third party driver's classes to
the CLASSPATH that will be in effect for the server. Just adding the driver
to your window's class path will do nothing.
2 - Go to the directory %DOMAIN_HOME%\config\jdbc, where you will find
files of the name *-jdbc.xml. Each of these represents a DataSource.
Copy one of them, perhaps either examples-demo-jdbc.xml, or
examples-demoXA-jdbc.xml depending on whether you want to make an XA
or non-XA pool. Make you new file's name like the name of the DataSource,
still ending in -jdbc.xml. Eg: MS_Beta-jdbc.xml
3 - Edit this file to change as much as would be clear for the
driver you want. Eg: change the driver class to the class you want,
the user name, URL, test table etc. Also, change the pool's initial
capacity to 0. This is so the pool can be created without making a
connection. We need that because the password is encrypted, and
there is no manual way for you to add the correct one yet.
4 - go one directory up, and edit the config.xml. Find a
jdbc-system-resource entry corresponding to the original
resource file you copied. Make a new entry in the config file,
like the original, but change the Datasource name to your new one.
5 - If this all went well, reboot your server and go to your data
source in the console, and edit it. Alter the password to what it
really should be, and you can also change whatever else you might
want.
6 - shut down again, and reboot, and you should then be able to go to
your data source in the console and test a connection.
That's it. Here is an example of a jdbc.xml file I made, and
the entry I made in the config.xml:
config/jdbc/newpool-jdbc.xml:
<?xml version='1.0' encoding='UTF-8'?>
<jdbc-data-source xmlns="http://www.bea.com/ns/weblogic/90" xmlns:sec="http://www.bea.com/ns/weblogic/90/security"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90/security/wls"
xsi:schemaLocation="http://www.bea.com/ns/weblogic/90/domain.xsd">
<name>newpool</name>
<jdbc-driver-params>
<url>jdbc:sqlserver://frogger:1433</url>
<driver-name>com.microsoft.sqlserver.jdbc.SQLServerDriver</driver-name>
<properties>
<property>
<name>user</name>
<value>joe</value>
</property>
</properties>
<password-encrypted>{3DES}cPpx2Z6faqY=</password-encrypted>
</jdbc-driver-params>
<jdbc-connection-pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>5</max-capacity>
<capacity-increment>1</capacity-increment>
<shrink-frequency-seconds>900</shrink-frequency-seconds>
<test-connections-on-reserve>true</test-connections-on-reserve>
<test-table-name>SQL select 1</test-table-name>
<profile-type>0</profile-type>
</jdbc-connection-pool-params>
<jdbc-data-source-params>
<jndi-name>newpool</jndi-name>
<global-transactions-protocol>TwoPhaseCommit</global-transactions-protocol>
</jdbc-data-source-params>
<jdbc-xa-params></jdbc-xa-params>
</jdbc-data-source>
config.xml entry:
<jdbc-system-resource>
<name>newpool</name>
<target>examplesServer</target>
<descriptor-file-name>jdbc/newpool-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>

Update data automatically in sql server 2005 based on condition proplem

Hi guys i have problem I have two table
First one is
Second One is Vacation
as relation one to many (vacation has foreign key of Contract No OF Table Contract)
what i need is to update Contract table with field status =Finish where start vacation date >end contract Date
How i do that in sql server 2005 to make update automatically
Ex
contract table
status nvarchar(20)
end contract date time
vacation table
start vacation date time
end vacation date time
start vacation date is 23/10/2014
and End
is 26/10/2014
Now not update status in contract table to finish because vacation date start is less from end contract
but when date today is 27/10/2014 update contract table field status to finish
automatically with sql server 2005
How i do that condition to make update to data automatically based on changing on date
Update statement i need is
update Contract set status = finish where start vacation>end contract
but problem how i write this statement to update data automatically based on date today

Please post DDL, so that people do not have to guess what the keys, constraints, Declarative Referential Integrity, data types, etc. in your schema are. Learn how to follow ISO-11179 data element naming conventions and formatting rules. Temporal data should
use ISO-8601 formats. You failed again. Code should be in Standard SQL as much as possible and not local dialect.
This is minimal polite behavior on SQL forums. Now we have to write the DDL that you did not bother with! What you did post was wrong! There is no key or constraints. There is no generic “status” in RDBMS; a "<something in particular>_status"
is a state of being, so it needs a temporal duration. The correct idiom for this data model is:
CREATE TABLE Vacations
(vacation_contract CHAR(15) NOT NULL PRIMARY KEY,
vacation_start_date DATE NOT NULL,
vacation_end_date DATE,
CHECK(vacation_start_date < vacation_end_date),
Oh, a field is nothing like a column. You need to read a basic SQL or RDBMS book; you do not know the basics.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Open (.sdf) file with SQL server 2005 Management Studio

In VS2005, I have created a SQL Mobile database, (.sdf).
Copied that (.sdf) file to Desktop, and when I try to open with SQL Server 2005 management studio, its showing error "make sure the application for the file type (.sdf) is installed."
How can I open this file with SQL server?
Regards
Abinash

You must install SP2 if using Management Studio Express (http://www.microsoft.com/downloads/details.aspx?familyid=6053C6F8-82C8-479C-B25B-9ACA13141C9E&displaylang=en)Erik Ejlskov Jensen, MCTS: WM App, MCITP: SQL 2008 Dev - http://erikej.blogspot.com
Please mark as answer, if this was it.

Error when calling a XI-webservice from SQL-Server 2005

Hi all,
we have published a webservice with XI 7.0 (using the SOAP-Adapter) and try to call it from a stored procedure within SQL-Server 2005. Upon execution we receive the error
"<SAP:Code area="MESSAGE">EMPTY_HTTP_REQUEST_RECEIVED</SAP:Code>" and
"<SAP:Stack>Empty HTTP query received; message processing not possible </SAP:Stack>".
We are using the dll MSXML2.ServerXMLHTTP. The webservice is available and can be reached from other tools like SOAP-UI when using the same endpoint-URL. It is also possible to call the service from Visual-Basic using the same code.
Does anyone has any clue about what's causing this error?
Thanks in advance!

It is clear that, PI service is working absolutely fine and the problem is calling it in your SP. I do not think you are calling a web service but actually sending a HTTP request to the server. An HTTP request and a SOAP call are different in terms of protocol. You would need to explore more on how to call web services from SQL SPs.. and the right place to search would be MS SQL Server Forums..!!
VJ

Automating Data Migration from SQL Server 2005

Hi All,
I need to migrate data from SQL Server 2005 to Oracle DB ( Datawarehouse). The data migration involves updating Dimensions and Fact table. I have got painful job of switching topology to point to over 100 different weekly SQL DBs ( in sequence) and pull the data into DW. How can I automate my ODI process to switch from one after the other.
Any Ideas?
KS

ODI Variables are there to help you with this. Please go through this post at [http://blogs.oracle.com/dataintegration/2009/05/using_odi_variables_in_topolog.html] .
This will show you how to use a variable Oracle data server.
On similar lines you should be able to switch to any of your 100 weekly SQL server DBs.
And loop in a sequence to load data from all of them.
Hope that helps

Upgrade data base from sql server 2005 to sql server2008

Hi guys,
What is the best way for upgrade my SQL Server 2005 data base to SQL 2008?

It depends on how you want migrate, in-place or side-by-side?
In-place: Run a backup of all databases and then install the new SQL Server version
Side-by-side: Install the new SQL Server, backup all database of old SQL Server and restore them on the new one. Then copy all logins from old to new server.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Restoring an ms access database backup file in sql server 2005

Hello everyone.
I have an ms access database backup file.
Presently i dont have ms access database in my system.
It is high priority to access that ms access database backup file.
So, is there anyway to access that in sql server?
-- Thanks and Regards Srikar Reddy Gondesi, Trainee SQL Server Database Administrator Miracle Software systems, Inc.

Hello sir,
i tried to use import/export wizard to import data from an ms access backup file.
I completed it with some warning's.
Wizard has shown that 2 out of three objects(tables and views) are copied to destination database(empty database which i have created for storing this imported data).
And in that process, wizard made me to create a package.
Now how to access that package?
And my newly created database has no data.(i mean it is supposed to have 2 objects which are copied from source right?)
Sorry if my doubt looks silly i have never used ssis or import/export ever before.
-- Thanks and Regards Srikar Reddy Gondesi, Trainee SQL Server Database Administrator Miracle Software systems, Inc.
-- Thanks and Regards Srikar Reddy Gondesi, Trainee SQL Server Database Administrator Miracle Software systems, Inc.

Error - BEA-110412 - WEblogic 8.1 sp4 +sql server 2005

i using two connecion pooling
FIrst is - bea MS sql server 2000 TYpe 4XA version 7 2000
second is - bea MS sql server 2000 TYpe 4 version 7 2000
am getting this . ne one tell why this error happens ?
<May 3, 2007 10:44:49 AM IST> <Error> <JTA> <BEA-110412> <Name=[EJB
StatelessBean.findateFilter(java.lang
.String,java.util.Date,java.util.Date)],Xid=BEA1-0098FB74440133C475C1(740772),Status=Committed,Heuristi
cErrorCode=XA_HEURHAZ,numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=0,seconds left=120,
activeThread=Thread[ExecuteThread: '13' for queue: 'weblogic.kernel.Default',5,Thread Group for Queue:
'weblogic.kernel.Default'],XAServerResourceInfo[XAPool]=(ServerResourceInfo[XAPool]=(
state=committed,assigned=AX),xar=XAPool,re-Registered = false),SCInfo[ade+AX]=
(state=committed),properties=({weblogic.transaction.name=[EJB
StatelessBean.findDateFilter(java.lang.Strin
g,java.util.Date,java.util.Date)]}),local properties=({}),OwnerTransactionManager=ServerTM[ServerCoordi
natorDescriptor=(CoordinatorURL=AccountEX+192.168.11.21:7001+Trade+t3+, XAResources={},NonXAResources={
})],CoordinatorURL=AX+192.168.11.21:7001+Tade+t3+) completed heuristically: (XAPool, H
euristicHazard, ()) >
<May 3, 2007 10:44:49 AM IST> <Error> <EJB> <BEA-010026> <Exception occurred during commit of transacti
on Name=[EJB findDateFilter(java.lang.String,java.util.Date,java.util.Date)],Xid=BEA1-0098FB
74440133C475C1(740772),Status=Committed,HeuristicErrorCode=XA_HEURHAZ,numRepliesOwedMe=0,numRepliesOwed
Others=0,seconds since begin=0,seconds left=120,XAServerResourceInfo[XAPool]=(ServerResourceIn
fo[XAPool]=(state=committed,assigned=AX),xar=XAPool,re-Registered = false),SCI
nfo[Tade+AX]=(state=committed),properties=({weblogic.transaction.name=[EJB
StatelessBean.findDateFilter(java.lang.String,java.util.Date,java.util.Date)]}),
local properties=({}),OwnerTransactionManager=
ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=AX+192.168.11.21:7001+Tade+t3+, XAResource
s={},NonXAResources={})],CoordinatorURL=AccountEX+192.168.11.21:7001+Tade+t3+): javax.transaction.Heur
isticMixedException: (XAPool, HeuristicHazard, ())
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.jav
a:296)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:246)
at weblogic.ejb20.internal.BaseEJBLocalObject.postInvoke(BaseEJBLocalObject.java:363)
at FacadeEJB_fnbmmb_ELOImpl.findDateFilter(BvTradexFacadeEJB_fnbmmb_ELOImpl.java:1375)
at AxAxInst.doSelect(AxAxInst.java:230)
at hub.hubmp.HUBMPTransportFinal.execute(HUBMPTransportFinal.java:81)
at jsp_servlet._hubmp.__batchurl._jspService(endrequest.jsp:8)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1
006)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at hub.hubmp.servlet.FOPFilter.doFilter(FOPFilter.java:44)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at hub.hubmp.servlet.UtfFilter.doFilter(UtfFilter.java:36)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletCont
ext.java:6724)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
.>

this is an error when you somehow timeout the connection on DB without going through the WLS...
This can happen if the oracle setting are designed to timeout ideal connections or some one does it manually...
Also this can be found in case of Locks or some corrupt data on oracle which makes the JTA transaction end abnormally...

How to Create text file and ammend that file in SQL Server 2005

HI All,
I want to upload some Sql query ouput to .txt file. I have tried using the BCP command. I am not able to create the .txt file dynamically by running this query.
First create the bcptest.txt in File System and run the query, then its copying the data.
But I want to create .txt dynamically and wants to append the .txt data instead of overwriting.
EXEC
xp_cmdshell
'bcp "SELECT * FROM sysfiles" queryout "C:\bcptest.txt" -T -c -t,'
Ram MSBI Developer

Hi Sebastian,
I have used the query and it is working fine. but, How could i include the headers of the query also in to the Excel Sheet.
RehaanKhan. M
see the method discussed here
http://sqlblogcasts.com/blogs/madhivanan/archive/2008/10/10/export-to-excel-with-column-names.aspx
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Server performance slow using sql server 2005

Dear Team,
Kindly assist me in solving the performance issue .
The server is very slow and it is taking more time.,
SAP version details:
- SAP ECC 6.0 sr3 version.
-DB SQl server 2005.
performance is very slowi,ts is taking time to execute the Transactions.
Appreciate for quick response.
Thanks&Regards
Kumarvyas

Dear Team,
In T- code: DB13
Space overview
Found an error:" ERROR CONDITION EXISTS- CHECK FILES TAB ".
in the files TAB: Datafiles:
Exception in red for <SID>DATA1, : <SID>DATA2,: <SID>DATA3
Freepct: 0,0,0,
Free pct : Free percentage of space in a SQL Server file tab
How to extend the The DATA files in SQL server 2005
Reagrds
Kumar

Problem attaching mdf file in sql server 2008

hi...!
I have an mdf file of sql server 2005 database now i want it to attach in sql server 2008 R2 but when i try to attach it, it gave me error saying.
Fail to retrieve data for this request.
An exception occur while executing a Transact-SQL statement or batch.(Microsoft.sqlServer.connectionInfo)
C:\program files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\file6.mdf is not a primary database file. (Microsoft SQL Server, Error:5171)
Thanks in advance

hi...!
I have an mdf file of sql server 2005 database now i want it to attach in sql server 2008 R2 but when i try to attach it, it gave me error saying.
Fail to retrieve data for this request.
An exception occur while executing a Transact-SQL statement or batch.(Microsoft.sqlServer.connectionInfo)
C:\program files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\file6.mdf is not a primary database file. (Microsoft SQL Server, Error:5171)
Thanks in advance
Hello,
As the message says the file is not primary data file ,i guess it must be ndf(secondary data file) or some other file you might have selected by mistake.PLease select primary data file and try attching you will succed
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Error when upgrading from SQL Server 2005 to SQL Server 2014

Hello everyone,
Could you help me, i have an error when i try to upgrade my SQL Server 2005 Enterprise Edition to SQL Server 2014 Enterprise Edition,
All of prerequisits are available and i dont have a problem,
before the end of migration process, i have this error: The group name could not be found (0x84BB0001)
File log:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: The upgrade process for SQL Server failed. To continue the upgrade process, use the following information to resolve the error. Next, uninstall SQL Server by using this
command line: setup /q /action=uninstall /instanceid=MSSQLSERVER /features=SQLENGINE,FULLTEXT,REPLICATION. Then, run SQL Server Setup again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x84BB0001
Error description: The group name could not be found.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x0AD059E6%400x3FAAA006&EvtType=0x0AD059E6%400x3FAAA006
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: The upgrade process for SQL Server failed. To continue the upgrade process, use the following information to resolve the error. Next, uninstall SQL Server by using this
command line: setup /q /action=uninstall /instanceid=MSSQLSERVER /features=SQLENGINE,FULLTEXT,REPLICATION. Then, run SQL Server Setup again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x84BB0001
Error description: The group name could not be found.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x0AD059E6%400x3FAAA006&EvtType=0x0AD059E6%400x3FAAA006
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: The upgrade process for SQL Server failed. To continue the upgrade process, use the following information to resolve the error. Next, uninstall SQL Server by using this
command line: setup /q /action=uninstall /instanceid=MSSQLSERVER /features=SQLENGINE,FULLTEXT,REPLICATION. Then, run SQL Server Setup again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x84BB0001
Error description: The group name could not be found.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x0AD059E6%400x3FAAA006&EvtType=0x0AD059E6%400x3FAAA006
Best regards,
Guiga Hafedh

There are more detailed logs for the various components. The one of interesting is the one for the engine or possibly the one for full-text.
These logs are extremely verbose, and the errors are rarely crystal clear, but at least give them a try. If you have problems, find a place to upload them (Dropbox, Skrydrive etc), so that we can look.
The closest at hand is that "group" that cannot be found is an AD group.
Erland Sommarskog, SQL Server MVP, [email protected]

Error in adding PRIMARY Data file of SQL Server 2005

Similar Messages

Maybe you are looking for