Error in adding Sub-feature in main Feature

Hi,
There is a feature- RLPGR for defaulting Dependent/Beneficiary group. Now we have a requirement to default the dependent group based on Personnel area- WERKS.
Since, in feature RLPGR use decision feature- PME72 and it doesn't has WERKS decision field, I created on sub-feature using different decision struture PME30. However while saving my customize sub-feature, it is giving me following error-
"RLPGR Field WERKS in ZLPGR not in main feature RLPGR used"
Please advice, how could I use the WERKS field in RLPGR ?
Saurabh Garg

Hi
Try calling the subroutine in feature and write fetching logic inside the subroutine.
[http://help.sap.com/printdocu/core/print46c/en/data/pdf/PAXX/PYINT_MERKMAL.pdf]
~~~Ganesh Kumar K.

Similar Messages

Error when adding calling features

Ever since I have been with BT I have never been able to add a calling feature online. I always get some sort of error. The latest one is:
Sorry...
There's been a technical error – but you can still order online.
To order a Broadband and Calls package, click here
To order a TV, Broadband and Calls package, click here
To order BT Vision, click here
To order BT Total Broadband, click here
To order a new phone line, click here
Want to switch your calls back to BT? Click here
Ref# CON-0049
Why is this?

Hi Spock,
I am sorry to hear about the problems you have had adding your calling features online. I would like to take a look at this for you. Please could you drop me an email with your BT account details and a link to this thread?
My email address can be found by clicking on my profile.
Thanks
Paddy,
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Adding sub-menus wrecks main menu bar display

I have just learned to create a Spry horizontal pull-down menu. I have dark gradient images for both the 'up' and 'down' states, and I've set my text attributes and everything works fine.
(I'm new, but trying hard.)
HOWEVER - I have 2 problems:
as soon as I add in sub-menus to a menu item, the gradient images fail to show on the main menu for that menu item only. I just get a white block, out of which you obviously can no longer read the white text. The gradients and other attributes immediately apply beautifully to the sub-menu items (even though I haven't even applied any attributes to them yet!), but they are lost from the main menu bar wherever I apply sub-menus.
ALSO - although the 'up' state gradient image works fine behind the menu item, the downstate does not show when I hover my mouse over it. I've checked that the 'up' and 'down' files are not identical, and I've ensured that they are both applied in the CSS.
When I remove the sub-menus - works fine. Add 'em back in, problem recurs. Applies to whichever menu item I apply the submenus to.
I have downloaded the latest version of Spry (no idea which version I already had) but can't see where to install it or how to run setup. Why are things never easy...?
I am using Dreameaver CS4 v10 and Chrome browser. Same thing happens in Firefox, IE and Safari - no difference.
Please forgive my newness. I have had a look at other similar forum posts but although people seemed to have linked issues, they were not the same.
Anyone any ideas? I am getting desperate. Been trying to fix it by myself all day.
Thanks
Nicola

Nicola,
The Fact: It's all in the markup and the CSS.
The Problem: We are not privy to your markup and CSS and as such cannot help you.
The Solution: Supply a link to your site, or at the very least, copy and paste your code here
Gramps

Application Error while activating the feature - for creating list content type, list definition and list instance

Dear all,
I am getting application error while enabling the feature. if any body can point out the issue - that will be helpful.
content type
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Field ID="{4C1B0A21-FCE0-4CFE-8742-A250672AFE4F}" Type="Note" Name="CourseDesc" DisplayName="Course Description" Required="TRUE" Group="Training Site Columns"/>

<ContentType ID="0x0100d57ecc53fde34177b096abd0ec90a8f9"
Name="TrainingCourses"
Group="Training Content Types"
Description="Defines a Course"
Inherits="TRUE"
Version="0">
<FieldRefs>
<FieldRef ID="{4C1B0A21-FCE0-4CFE-8742-A250672AFE4F}" Name="CourseDesc" DisplayName="Course Description" Required="TRUE"/>
</FieldRefs>
</ContentType>
</Elements>
List definition
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">

<ListTemplate
Name="TrainingCourses"
Type="10100"
BaseType="0"
OnQuickLaunch="TRUE"
SecurityBits="11"
Sequence="410"
DisplayName="TrainingCourses"
Description="Training Courses List Definition"
Image="/_layouts/images/itgen.png"/>
</Elements>
List instance
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<ListInstance Title="TrainingCourses"
OnQuickLaunch="TRUE"
TemplateType="10100"
Url="Lists/TrainingCourses"
Description="Training Course List Instance">
</ListInstance>
</Elements>
schema
<?xml version="1.0" encoding="utf-8"?>
<List xmlns:ows="Microsoft SharePoint" Title="TrainingCourses" FolderCreation="FALSE" Direction="$Resources:Direction;" Url="Lists/TrainingCourses-LD_TrainingCourses" BaseType="0" xmlns="http://schemas.microsoft.com/sharepoint/">
<MetaData>
<ContentTypes>
<ContentType ID="0x0100d57ecc53fde34177b096abd0ec90a8f9" Name="TrainingCourses" Group="Training Content Types" Description="Defines a Course" Inherits="TRUE" Version="0">
<FieldRefs>
<FieldRef ID="{4C1B0A21-FCE0-4CFE-8742-A250672AFE4F}" Name="CourseDesc" DisplayName="Course Description" Required="TRUE" />
</FieldRefs>
</ContentType>
</ContentTypes>
<Fields>
<Field ID="{4c1b0a21-fce0-4cfe-8742-a250672afe4f}" Type="Note" Name="CourseDesc" DisplayName="Course Description" Required="TRUE" Group="Training Site Columns" />
</Fields>
<Views>
<View BaseViewID="0" Type="HTML" MobileView="TRUE" TabularView="FALSE">
<Toolbar Type="Standard" />
<XslLink Default="TRUE">main.xsl</XslLink>
<RowLimit Paged="TRUE">30</RowLimit>
<ViewFields>
<FieldRef Name="LinkTitleNoMenu">
</FieldRef>
<FieldRef Name="CourseDesc">
</FieldRef>
</ViewFields>
<Query>
<OrderBy>
<FieldRef Name="Modified" Ascending="FALSE">
</FieldRef>
</OrderBy>
</Query>
<ParameterBindings>
<ParameterBinding Name="AddNewAnnouncement" Location="Resource(wss,addnewitem)" />
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_ONET_HOME)" />
</ParameterBindings>
</View>
<View BaseViewID="1" Type="HTML" WebPartZoneID="Main" DisplayName="$Resources:core,objectiv_schema_mwsidcamlidC24;" DefaultView="TRUE" MobileView="TRUE" MobileDefaultView="TRUE" SetupPath="pages\viewpage.aspx" ImageUrl="/_layouts/images/generic.png" Url="AllItems.aspx">
<Toolbar Type="Standard" />
<XslLink Default="TRUE">main.xsl</XslLink>
<RowLimit Paged="TRUE">30</RowLimit>
<ViewFields>
<FieldRef Name="Attachments">
</FieldRef>
<FieldRef Name="LinkTitle">
</FieldRef>
<FieldRef Name="CourseDesc">
</FieldRef>
</ViewFields>
<Query>
<OrderBy>
<FieldRef Name="ID">
</FieldRef>
</OrderBy>
</Query>
<ParameterBindings>
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_DEFAULT)" />
</ParameterBindings>
</View>
</Views>
<Forms>
<Form Type="DisplayForm" Url="DispForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
<Form Type="EditForm" Url="EditForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
<Form Type="NewForm" Url="NewForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
</Forms>
</MetaData>
</List>
I am applying the feature to SPWeb level.
cheers
Sathya

redeployed a new solution; since I was getting this error. I would have done typo errors etc.
https://naveengopisetty.wordpress.com/2011/09/10/error-occurred-in-deployment-step-activate-features-invalid-file-name-the-file-name-you-specified-could-not-be-used-it-may-be-the-name-of-an-existing-file-or-directory-or-you-may-not-have-pe/
Cheers
Sathya

Visual Studio keeps adding SharePoint features when opening a solution

Hello everybody.
I'm facing a rather naughty problem. In a Windows 2012 environment (hosted inside an Azure virtual machine), with SharePoint installed, I created a VS SharePoint on-premise solution. I added a feature, and started adding lists, libraries, site columns, layout
pages and such. At one point, every time I added a new list definition, the VS would create me a new feature. Which is not what I wanted, so I manually deleted the new feature and added the list to the first feature. No matter how much I try, VS keeps adding
features instead of using the one I already got.
But that's a minor problem. After a while of adding lists, I did a check in to my TFS and closed the VS. After a couple of days, I open the VS again, and without a warning VS checked out the solution, checked out my only feature, removed the lists from it
and created one feature for each library. I ended up with feature2.feature, feature3.feature, ..., feature50.feature files!!! Insane!!! I had to manually delete them and re-add them to my first feature.
Now I can't turn VS off without having this mess all over again. Why on Earth would somebody program VS to do this? Is there any way to turn this behaviour off?
Thanks in advance!
[Edit] Forgot to mention that I'm working with Visual Studio 2013.
Fernando A. Gómez F.
fermasmas.wordpress.com
Galería de ejemplos

Hi Fernando,
Thank you for posting in MSND forum.
Based on your issue, could you please tell me what template sharepoint project you create in VS2013?
In addition, I find a similar thread about your issue, please refer the Xiaoying’s reply to check this issue.
http://stackoverflow.com/questions/25857722/visual-studio-unexpectedly-adding-feature-on-load
Or you could try to download a new sharepoint template in this VS2013 and then create it check if you still get the issue.
I suggest you could try to create a same sharepoint project template from VS2013 on another machine and then check this issue again.
If you have any update message, please feel free to let me know.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HT1926 i am trying to download itunes 11.0 verision and am getting an error message that reads "feature ur trying to use is on a network resource that is unavailable" Can anybody help ?

I am trying to download the new version of itunes 11.0 but am getting an error message that reads "Feature your trying to use is on a network resource that is unavailable" Does anybody know how to resolve?

Which particular .msi file does the message go on to say cannot be found? (Several different .msi files might be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)

Trying to download iTunes 11.1 but it keeps giving me an error message saying: The feature you are trying to use is on a network resource that is unavailable.

Trying to download iTunes 11.1 but it keeps giving me an error message saying:
The feature you are trying to use is on a network resource that is unavailable.
Click OK to try again, or enter an alternate path to a folder containing the installation package "iTunes64.msi" in the box below.
Use Source:

iTunes.msi
Perfect, thanks.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Does not let me add text to my verizon website. This adding text feature works well on internet explorer. I can click on add text, the box opens up but I can not type in the box for some unknown reason. What can be done to correct this problem ...

does not let me add text to my verizon website. This adding text feature works well on internet explorer. I can click on add text, the box opens up but I can not type in the box for some unknown reason. What can be done to correct this problem ...

I didn't search before, but "you are not alone" (the thread [https://support.mozilla.com/en-US/questions/747424 In Verizon's Sitebuilder for webpages, I can not edit text boxes when using Firefox. I do not have this problem if I use Internet Explorer. Is there a setting I can change in Firefox to correct this problem?] has 18 votes for "I have this problem, too).
I can only guess about the reason... Firefox works with many websites' "rich text" editors, but ones that haven't been updated for five years may assume that Firefox is the old Netscape browser and use scripting techniques that don't work in Firefox.
If Verizon has a different "basic" or HTML editor that you can tolerate using, you could try that. It might not be subject to the same incompatibilities.
If I someday get a Verizon account, I will surely be looking into this further, but for now, it's hard to suggest anything else.

I am trying to create an executable vi that will call out another vi and show its front panel in the executable. When I try this I recieve this error message "top level vi (my main vi) was stopped at unknown on the block diagram of (my sub vi)

I am trying to create an executable vi that will call out another vi and show its front panel in the executable. When I try this I recieve this error message "top level vi (my main vi) was stopped at unknown on the block diagram of (my sub vi)

Well the most common way is to enclude the vi's in the build spec either directly in the dependancies that the App builder automatically generates OR by declaring them in the build spec as "additional enclusions" (like you must do for dynamic vi calls in your app.
I have heard rummors about My.app Stuff.vi in a nugget Intaris posted- and I've wanted to dig deaper into Intaris' claims- but have not tried it myself.
If you go down the stuff.vi route Keep us curious guys posted
Jeff

Fatal Error: Could not find Feature AnalyticsLinks in sharepoint 2010 while migration from 2007 site using stsadm command

Fatal Error: Could not find Feature AnalyticsLinks in sharepoint 2010 while migration from 2007 site using stsadm command

Hi ,
Firstly, I need to verify the followings:
Whether you created a feature called AnalyticsLinks and activatated it at SharePoint 2007 site.
Whether you installed the feature at SharePoint 2010 site.
Please deactivate the feature AnalyticsLinks, then migrate SharePoint 2007 site to SharePoint 2010, compare the result.
Also , please check whether you have installed the feature AnalyticsLinks at your SharePoint 2010 site. If not, please install and activate it, compare the result.
Here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/17b17bd3-126c-44d4-bd58-38dd613017a0/fatal-error-could-not-find-feature-reviewpublishingspd1055?forum=sharepointadminprevious
http://mrin17.wordpress.com/2009/09/15/fatalerror-could-not-find-feature-s2siteadmin-while-importing-sites-from-different-server-at-sharepoint/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Adding iCloud feature to backup device to local storage.

Adding this feature, personally would make my life simpler in a whole bunch of ways. What if we could make iCloud temporarily store any amount of data (from our iOS devices) until all this data is backed up to iTunes on a computer setup to hold the backups in the first place. After the computer is done storing all the data it would have to send a confirmation to iCloud letting it delete the backup in the cloud. It doesn't even need to be a computer what if it was time capsule or an Airport Extreme using an external hard-drive. The confirmation would help in making sure everything is there, because in the case of a power failure or a coincidence similar would in turn tell iCloud the data was not backed up, then iCloud would notify the iOS device was not successfully synced due to the malfunction. So that way you know and can personally fix the problem or sync the data to your computer personally. This brings ease and is more affordable, people can sync their iOS devices away from the computer (like on vacation or at work) the same they would with iCloud but the computer or HD would store the data instead of iCloud.

Even if you are backing up to iCloud, you can perform a manual backup to your computer using iTunes at any time, and delete your iCloud backup thereafter if you wish. Not everyone has a computer or wishes to use a computer in this way so I doubt you'll ever see a system designed around this type of functionality, especially when it can easily be done manually already.

Does the K9N6SGM-V (MS-7309) 1.11 BIOS have any added overclocking features?

I have the K9N6SGM-V with the 1.8 BIOS. I am wondering if I update to the 1.11 BIOS that is offered at this URL: http://global.msi.com.tw/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1086 if it will have any added overclocking features. I would really just like to increase the FSB on the X2 Black Edition CPU I currently have installed. Any help would be greatly appreciated.
Thanks,
RHH

Quote
if it will have any added overclocking features.
No, and for these kind of mATX Boards, the chance that such options will ever be included is close to zero. They are not really intended for overclocking in the first place.

Error while adding principal to a process

Hi All,
I am getting the following error while adding security principal to Task Manager for my process,
Caused by: | [com.adobe.livecycle.usermanager.client.DirectoryManagerServiceClie
nt] errorCode:16385 errorCodeHEX:0x4001 message:Exception wrapped in DSCExceptio
n is Null or NOT An Instance of UMException chainedException:ALC-DSC-012-000: co
m.adobe.idp.dsc.registry.ServiceNotFoundException: Service: DirectoryManagerServ
ice not found.chainedExceptionMessage:Service: DirectoryManagerService not found
. chainedException trace:ALC-DSC-012-000: com.adobe.idp.dsc.registry.ServiceNotF
oundException: Service: DirectoryManagerService not found.
at com.adobe.idp.dsc.registry.service.impl.ServiceRegistryImpl.getServic
e(ServiceRegistryImpl.java:972)
at com.adobe.idp.dsc.registry.service.impl.ServiceRegistryImpl.getHeadAc
tiveConfiguration(ServiceRegistryImpl.java:830)
at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.resolveConfiguration(
ServiceEngineImpl.java:146)
at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:58)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMes
sage(AbstractMessageReceiver.java:88)
at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessa
geDispatcher.java:210)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(A
bstractMessageDispatcher.java:57)
at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:2
08)
at com.adobe.livecycle.usermanager.client.DirectoryManagerServiceClient.
findPrincipals(DirectoryManagerServiceClient.java:835)
at com.adobe.repository.ui.aac.commands.FindPrincipalsCommand.execute(Fi
ndPrincipalsCommand.java:127)
at com.adobe.repository.ui.aac.commands.CommandProcessor.execute(Command
Processor.java:56)
at com.adobe.repository.ui.aac.struts.actions.FindPrincipalsAction.execu
te(FindPrincipalsAction.java:115)
at com.adobe.repository.ui.aac.struts.actions.CommandProcessorAction.exe
Any help is greatly appreciated.
Thanks
Raghu

         I am using RHEL 5 - 64 bit Linux on 3-Tera Virtual host with Java 5,MySQL and adobe pre-configured Jboss 4.2 to install LiveCycle 8.2 and My intension is to get the Rights Management Service Installed . After configuring the .ear files(using Rights Management alc-lfs not excluded-solution component in the LCM CLI properties file ) and running the Jboss , I get the Jboss Running but with following Error
ERROR [org.jboss.ejb.plugins.LogInterceptor] RuntimeException in method: public abstract java.lang.Object com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterLocal.do RequiresNew(com.adobe.idp.dsc.transaction.TransactionDefinition,com.adobe.idp.ds c.transaction.TransactionCallback) throws com.adobe.idp.dsc.DSCException:
ALC-DSC-000-000: com.adobe.idp.dsc.DSCRuntimeException: Internal error.
        at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doR equiresNew(EjbTransactionBMTAdapterBean.java:249)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Caused by: java.lang.NoClassDefFoundError: com/adobe/dctmconnector/config/DctmConnectorConfigBean
        at java.lang.Class.getDeclaredConstructors0(Native Method)
        at java.lang.Class.privateGetDeclaredConstructors(Class.java:2357)
        at java.lang.Class.getConstructor0(Class.java:2671)
        at java.lang.Class.newInstance0(Class.java:321)
        at java.lang.Class.newInstance(Class.java:303)
        at com.adobe.idp.dsc.registry.component.impl.ComponentRegistryImpl$12.doInTransact ion(ComponentRegistryImpl.java:877)
        at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doR equiresNew(EjbTransactionBMTAdapterBean.java:218)
        ... 199 more
2009-06-16 10:23:02,554 ERROR [com.adobe.idp.dsc.startup.DSCStartupServlet] DSC Startup failed. Reason: Internal error.
2009-06-16 10:23:02,554 WARN   [com.adobe.idp.dsc.startup.DSCStartupServlet] Unable to start the DSCManager
and upon running the deploy liveCycle Component using LCM CLI task
./ConfigurationManagerCLI.sh deployLiveCycleComponets -f cli_propertyFile.txt
I see that few of DSCs (especially the adobe-usermanager-dsc ) were never started by the installer and It stopped throwing Exceptions While trying to deploy adobe-rightsmanagement-jboss-dsc.jar.
Progress: [5%,    DSC already installed, but is not started adobe-remotingConnector-dsc.jar]
Progress: [8%, Deploying DSC    adobe-usermanager-dsc.jar]
Progress: [8%,    DSC already installed, but is not started adobe-usermanager-dsc.jar]
Progress: [11%, Deploying DSC    adobe-usermanager-util-dsc.jar]
Progress: [11%,    DSC already installed, but is not started adobe-usermanager-util-dsc.jar]
Progress: [14%, Deploying DSC    adobe-jobmanager-dsc.jar]
Progress: [14%,    DSC already running adobe-jobmanager-dsc.jar]
While LCM CLI tries to install RightsManagement DSC following exceptions are thrown
[2009-06-16 10:47:16,604], INFO, main, com.adobe.livecycle.lcm.feature.deployment.DeployDSCs, DSC not installed. DSC will now be installed: com.adobe.livecycle.RightsManagement /opt/adobe/livecycle8.2/deploy/adobe-rightsmanagement-jboss-dsc.jar
[2009-06-16 10:47:32,227], SEVERE, main, com.adobe.livecycle.lcm.feature.deployment.DeployDSCs, Failed to deploy component /opt/adobe/livecycle8.2/deploy/adobe-rightsmanagement-jboss-dsc.jar.
com.adobe.livecycle.lcm.core.LCMException[ALC-LCM-030-200]: \ to deploy component /opt/adobe/livecycle8.2/deploy/adobe-rightsmanagement-jboss-dsc.jar.
        at com.adobe.livecycle.lcm.feature.deployment.DeployDSCs.deployDSCFiles(DeployDSCs .java:396)
        at com.adobe.livecycle.lcm.feature.deployment.DeployDSCs.deployDSCs(DeployDSCs.jav a:149)
Caused by: com.adobe.idp.common.errors.exception.IDPSystemException: nullorigin: | [com.adobe.livecycle.usermanager.client.DirectoryManagerServiceClient] errorCode:16385 errorCodeHEX:0x4001 message:Exception wrapped in DSCException is Null or NOT An Instance of UMException chainedException:ALC-DSC-012-000: com.adobe.idp.dsc.registry.ServiceNotFoundException: Service: DirectoryManagerService not found.chainedExceptionMessage:Service: DirectoryManagerService not found. chainedException trace:ALC-DSC-012-000: com.adobe.idp.dsc.registry.ServiceNotFoundException: Service: DirectoryManagerService not found.
I tried to look for adobe-usermanager-dsc in the admin UI but did not find one over there . I even tried copying the adobe-usermanager-dsc.jar to pre-configured Jboss server/all/lib directory but that does'nt makes a difference .
I was suggested to use different combinations of excluded solution components in the cliProperties file
When I used the following list of   excludedSolutionComponents I did not see the (ERROR [com.adobe.idp.dsc.startup.DSCStartupServlet] DSC Startup failed. Reason: Internal error.) but still the dobe-usermanager-dsc does not starts and I get the same errors of (com.adobe.idp.dsc.registry.ServiceNotFoundException: Service: DirectoryManagerService not found.) when the LCM CLI reaches installing the Rights Management DSC.
excludedSolutionComponents=ALC-LFS-BusinessActivityMonitoring,ALC-LFS-ConnectorI BMContentManager,ALC-LFS-ContentServices,ALC-LFS-PDFGenerator,ALC-LFS-ProcessMan agement
#,ALC-LFS-RightsManagement,ALC-LFS-BarcodedForms,ALC-LFS-DigitalSignatures,ALC-L FS-Forms,ALC-LFS-Output,ALC-LFS-PDFGenerator3D,ALC-LFS-ReaderExtensions,ALC-LFS- ConnectorEMCDocumentum,ALC-LFS-ConnectorIBMFileNet
Any help on this issue will be highly obliged.
Thank you.
Mohammad

Everytime i open Mozilla Firefox appears several messages saying that there were errors on adding toolbar element or menu element.How can i get rid of this?

I changed my operative system in my computer to windows 7 and add several plugins to my mozilla firefox, and after that i couldn´t find the plus signal to open a new page in a new tab.So, everytime i opened a new page it oppened a new firefox window, and this was very boring.So, i tryed to open mozila in safe mode and tryed to add some extras and i think it was because of this that i started to have several boxes from java script application opening and telling about several errors everytime i open a new window in mozilla.The errors are the following:
"error on adding toolbar element:NS_error Unexected, component returned failure code:0x8000fff (NS_Error_Unexpected)...id:places-New Place
or:id:Plus-Circles
or:id:Plus-Profile
or:id:Wallet
or:id:Web fonts
error on adding menu element:NS_Error_Unexpected, component returned failure code:0x8000fff(NS_Error_unexpected) id:Places-New Place
id:Plus-Circles
id:Plus-Profile
id:Wallet
id:Web fonts
id:"
The problem now is that despite the errors appears all the time i open firefox, the good thing is that the plus signal now appears and i can open a new page in a new tab but that page opens at the same time in a new window!!! I mean the page appears in a new tab and in a new window and the errors are appearing all the time i open mozilla!What can i do to get rid of this???

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

OER 11.1.1.7 - Asset Navigator doesn't open with an Error - Missing Required permissions attribute in main jar

Hi,
I have installed OER-11g version 11.1.1.7 and am successfuly able to open Asset Editor , ImpExp utility and also could harvest SOA and OSB components.
Issue 1:
However while trying to open the Navigator of the harvested components in OER console, a new window opens with two sections ( top and bottom). The top one which is a diagram view doesn't open with an error - Missing required permissions attribute in main jar: http://localhost:7101/oer-web/applets/components.aler-thinkmapclient-11.1.1.7.0.jar.
Please find the screenshot below.
Issue #2 : While trying to browse for the Assets from OER console. The below error is seen ( missing permissions for components.jexplorer-11.1.1.7.0.jar)
Could someone direct me on how to solve this issue. Appreciate your help !
Thanks and regards,
Sridhar.

It works for me after I did a small tweak by as mine is a demo install.
Idea - is to make an security exception for the OER url in Java control console
Steps to do that :
1.Go to the control panel and uninstall the 64 bit version of Java
Open Programs and Features and select the 64 bit version of Java and select Uninstall.
2.Open up the Java Control Panel
Found as an option in the standard windows control panel
3.Check the version by clicking on the About Tab
If this is not what you expected you can go to java.com and download the latest version.
4.Click on the Security Tab in the Java Control Panel
5.Click on the Edit Site List button in the lower RH corner of the control panel
6.Add your URL to be allowed
Enter the full path that you use to access this such as https://myequallogics.com or the IP address if that is how you access it (as in http://192.168.0.100 - Https is recommended by Oracle.) Once complete hit OK. You should now see the exception on the security page.
7.Close out of the control panel.
8.You can now acess your site through the browser window.
Thanks to Java error: Missing required Permissions manifest attribute in main jar - Spiceworks for letting me know this.
regards,
Sridhar

Error in adding Sub-feature in main Feature

Similar Messages

Maybe you are looking for