Error in alignment in Sapscript

Hi all,
        I have copied a standard sapscript J_1IEWRT_CERT INTO ZJ_1IEWRT_CERT.
form  ZJ_1IEWRT_CERT is running succefully on one client, and i have imported this Z form to another client.
but the problem is now if the address line increases the alingment shifts to left and i am not getting the TDS and BSR field value as well. plz help as the same form is working fine on one client and not on other client.
plz help. wht could be the problem.
Thanks N Regards,
Ashmita Singh

Go back through your Z version, comparing all settings to original SAP version for form design, attribues, character formats, paragraph formats and main window content...you changed something somewhere, but then you had to since you saw the need for a Z*version of the standard form.

Similar Messages

  • Error message while transporting SapScript to productive system

    Hi,
    I have tried to transport an order sapscript form (modified Medruck) into the productive system. But I got errors in transaction stms.
    The error message is displayed like this:
    <b>R3TRFORMZMEDRUCKN</b> was repaired in this system
    Message no. <b>TW 104</b>
    <b>Diagnosis</b>
    Object R3TRFORMZMEDRUCKN is in repair status. Therefore, it cannot be imported.
    <b>System Response</b>
    The object is not imported.
    <b>Procedure</b>
    If you still want to import the object, release the relevant repair andrepeat the import.
    Does anybody know something about that problem?
    Cheers

    Hi,
    maybe somebody has already create your form in the productive system. Now you would like to create something already created.
    Maybe, you have to check in the TADIR table (key R3TR / FORM / name of the form) if the form already exist. What is the system source for the form. (in the PROD)
    And finaly, you can go to the SE03, select the first line and execute (to find object R3TR FORM ..) in all the request order. That will show you who has play with this form, and if a request was lost between DEV & PROD.  (in the DEV)
    Rgd
    Frédric
    Message was edited by: Frédéric Girod

  • Alignment in sapscript

    Hello Gurus,
    What is the trick to get the columns align?, I want to fix the size of the column, if the description of the material has a long name (40 characteres) the data goes right, if the name of the material is short goes left.
    So How difficult would be to get the columns length fixed?
    I am working with tab paragraph, I have test with unit CM, CH, but I dont understand why the data goes right , left according with the data.
    Someone knows how to solve the problem?
    Thanks so much
    Moderator message - Please use proper subject line in the future.
    Message was edited by: Suhas Saha

    hi Enrique,
    Alignment is a big issue to handle in scripts. Please use the TABs provided in the paragraph format. Each tab means the starting point of next variable.
    For eg:
    Var1,,Var2,,Var3
    In above eg. Var2 and Var3 will have fixed starting point as mentioned while creating the TABs. This means that even if Var2 is blank, it will not shift left.
    Forgot to add that column lengths should be fixed and hence you would need to truncate the length of your field. As in your example, if desciption should be truncated to 15 fields if your next column starts at 17 place.
    This is a pure trial and error method as per requirement.
    Please revert in case of doubt.
    Regards,
    DN.
    Message was edited by: Deepak Nagar

  • Error Message: alignment failure

    Spouse changed magenta print cartridge, did not push * button, otherwise cartridge installed correctly. Now alignment error keeps popping up. Won't print colors correctly. Prints magenta under blue. Tried HP solutions. No help. changed print cartridge again, no help. Uninstalled printer, reinstalled-- no help. Tried contacting HP, no help. Please, someone must know what to do, this is a BRAND NEW HP Officejet Pro 8500 Wireless printer.

    Please review this post and then post more details.  What your printer model?  What is your operating system?  Depending on the above youu may have options to request an alignment from either the driver's toolbox or the printer's front panel.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Getting error while  printing std sapscript

    Hello All,
    Im taking an output of standard document through tcode f.62
    this tcode generating one spool request , and m taking the printout through sp01 tcode.
    While taking printout  printer is printing the page with the below message.
    PCL XL error
    Subsystems : IMAGE
    Error : Internalerror ox18
    operator : beginimage
    Position : 533
    Pls let me knw how to rectify this error, is there any printer related setting which needs to be changes or something?
    Regards,
    Sunny

    thnks

  • Sapscript Error

    HI Gurus!
    i m geting an error while running a sapscript program -" Form ZREJECTNOTEin language EN is not active and has no errors ".
    Can u plz help me.
    Regards
    Rahul

    Hi,
    The script which you mentioned in the threas not active in the EN launguage eventhough you are running it in EN launguage. so copy it in EN launguage and aactivate it
    Regards
    Sudheer

  • HP Officejet 6310 All-in-One alignment failure error

    Unable to copy.  When I turn on printer it attempts to align print heads but produces error message "Alignment failed".  I can print from computer.
    Thanks.
    CJCJC

    Hi @CJCJC,
    Welcome to the HP Forums!
    I noticed that you are getting the alignment failure error with your HP Officejet 6310. I am happy to help you with this issue!
    I would suggest a hard reset, by going to this post, How to perform a Hard Reset, by @Rich1. It is important that the printer's power cable is plugged directly into the wall outlet, not a surge protector. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.  
    Also, I would recommend making sure none of your ink cartridges are low or empty, and that they are Genuine HP ink cartridges.
    Hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Sapscript alignment

    How will I put alignment in sapscript code? thanks!

    Hi
    Create a new PARAGRAPH format (ZA) in the Sap script and define the
    TAB settings in it as per the space required between fields
    10 CHAr left
    20 char  left
    40 char left
    in script write as below
    ZA &ITAB-MATNR&,,&ITAB-POSNR&,,&ITAB-MAKTX&
    THIS WILL ALLIGN THE FIELDS
    check 2 to 3 times and change the tab spaces and adjust accordingly
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • J4550 error message "Alignmnet page not detected" -alignment page prints ok

    j4550 Printer will not align. Alignment page prints correctly (per HP website), but scanning page gives an error message "Alignment page not found". Printer copies fine. Default alignment results in blurred printing.

    Hello , Welcome to the thread!  I understand that your HP Officejet Pro 8500 All-in-One A909a Printer is experiencing Printhead and Alignment failures. Because you have already replaced both the Cyan and Magenta Printhead (twice) and Black and Yellow Printhead in the past and the issues continue to occur over time I believe that the Printhead sensor or print system within the actual printer is going. Should this occur then print system issues, such as Alignment, Printhead, cartridge, quality, etc issues will occur and will usually become worse over time. Therefore, rather then replacing the Printheads it may be time to replace the actual printer. With that being said, there are a few troubleshooting steps that I would like you to complete to resolve this issue.   To start, please click here . Once the support document opens please review all of the listed Solutions and sub-steps to ensure that all steps have been completed. Should the issue persist, then a Firmware Update may be needed on your printer. However, I do need to know what Operating System you're using on your computer in order to provide you with the correct Firmware Update. The Firmware is the internal programming within your printer. It controls what your printer does and how your printer does it. If there is a corruption within the internal programming in your machine, your HP Officejet may not respond correctly.   Please respond to this post with the result of your Alignment Failed troubleshooting. Should the issue persist, be sure to include your Operating System in your response so I can provide you with the additional Firmware Update. I look forward to hearing from you!

  • How to display error message in Billing Output Type (VF03).

    Hi,
    could anyone suggest how do i display error message via billing (VF03) output type?

    i want to display an error message from my sapscript program.
    *determine discount
    it_zmas-discount = it_zmas-gross_value - zkwert.
    MODIFY it_zmas.
    ELSE.
    MESSAGE ID 'Z0' TYPE 'S' NUMBER '999' WITH 'Please maintain cust pricing grp 34 for ' wa_zmas-matnr.
    p_proc_screen = 'X'.
    ENDIF.
    when user enter billing doc no in vf03, user will click 'issue output type' and select their output type to be printed out.
    if there's an error in the print program, it should promt out an error message and do not allowed user to print preview and print the form out.
    what i had did previously, i prompt the error message and disable the print preview button. i think its not a good solution and i am not sure how to stop the form from not printing it out.
    i was wondering is there any user exit of the output type, vofm (which i had this solutions from my previous question, but unsure how to use it) or any other solutions.
    please help.

  • HP OfficeJet Pro 8500 Wireless A909g Will not print or align

    Not sure what the problem is: was printing fine till suddenly no ink on paper. Unit sounds like it's going through all the motions but lays no ink. Windows 7 home Pro 64bit. Error message: Alignment cancelled. I went through all the suggested steps...cleaned printheads number of times, all the steps for alignment. Did not replace the printheads yet. Could both go bad at the same exact moment? I get absolutly no ink on the paper, not a drop. Don't know if this is enough info. Hope so. Thanks in advance for any possible solutions.
    LP

    Hi SunWay,
    I understand you no longer have any ink printing on your pages and can not complete an alignment. From your description, I can see you have done a great deal of troubleshooting. It is not all that likely that both printheads would go at the same time but it is entirely possible. Another possibility is that the ink supply tubes are kinked. Please follow these steps to check the ink supply tubes:
    Open the printer lid. The carriage moves to the left side of the printer. Wait until the carriage is idle and silent.
    Look in the center of the printer for the four ink tubes that connect to the printhead, and then examine the ink tubes. The ink tubes should be bundled neatly, and they should not appear kinked or bent.
    Ink tubes, correctly bundled and not kinked
    The above solution and more can be found in the following document. If the issue persists, please use the document to troubleshoot the issue.
    If the issue continues to persist, I recommend calling HP and letting the know the issue as well as the steps you have already completed. It may be helpful to even let them know you completed all of the steps in HP document #c04261974.
    If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Pdf form error

    Hello Friends,
    I am working on <b>pdf based print form (adobe form)</b> in GTS module. When the activity message gets executed, the form is called.
    I am getting two errors when the activity message is executed.
    1) <b>“Error in PDF document formatting”</b>
    here is the detailed information about the error message:
    Message No. BCS_MEDIUM016
    Message Type – E (Error)
    Message Class – BCS_MEDIUM (Texts for BCS Medium for PPF)
    Message Number - 016
    Problem Class – 1 (very important)
    2) <b>“Exception CX_FP_API occurred”</b>
    here is the detailed information about the error message
    Message No. BCS_MEDIUM017
    Message Type – E (Error)
    Message Class – BCS_MEDIUM (Texts for BCS Medium for PPF)
    Message Number - 017
    Problem Class – 1 (very important)
    Please help me on how to rectify these errors. Is it the problem with the print form or is there an error with ADS.
    If anyone has encountered similar error(s) with <b>sapscript / smartform</b> and knows the solution, please share the same.
    Points will be rewarded for useful answers.
    Thanks,
    Arun.

    solved

  • Too large frames/Outdiscards errors

    Hi !
    We have a problem with switch connected to an IBM Chassis (model : WS-CBS3012-IBM-I).
    Several links seem to flap from time to time and we have dropped packets (Outdiscards) :
    XXX#show interfaces counters errors
    Port        Align-Err     FCS-Err    Xmit-Err     Rcv-Err  UnderSize  OutDiscards
    Gi0/7               0           0           0           0          0        43983
    XXX#show controllers ethernet-controller gigabitEthernet 0/7
         Transmit GigabitEthernet0/7              Receive
       2584788113 Bytes                        971769475 Bytes
       2128747524 Unicast frames              2142250737 Unicast frames
         10109338 Multicast frames                  7644 Multicast frames
         11694673 Broadcast frames                  1660 Broadcast frames
                0 Too old frames               991831483 Unicast bytes
                0 Deferred frames                 726180 Multicast bytes
                0 MTU exceeded frames             106240 Broadcast bytes
                0 1 collision frames                   0 Alignment errors
                0 2 collision frames                   0 FCS errors
                0 3 collision frames                   0 Oversize frames
                0 4 collision frames                   0 Undersize frames
                0 5 collision frames                   0 Collision fragments
                0 6 collision frames
                0 7 collision frames                   0 Minimum size frames
                0 8 collision frames           208582465 65 to 127 byte frames
                0 9 collision frames           286273443 128 to 255 byte frames
                0 10 collision frames           15408397 256 to 511 byte frames
                0 11 collision frames           12313490 512 to 1023 byte frames
                0 12 collision frames           10599137 1024 to 1518 byte frames
                0 13 collision frames                  0 Overrun frames
                0 14 collision frames                  0 Pause frames
                0 15 collision frames
                0 Excessive collisions                 0 Symbol error frames
                0 Late collisions                      0 Invalid frames, too large
                0 VLAN discard frames         1609083109 Valid frames, too large
                0 Excess defer frames                  0 Invalid frames, too small
           320523 64 byte frames                       0 Valid frames, too small
        396763728 127 byte frames
          6601722 255 byte frames                      0 Too old frames
         28139208 511 byte frames                      0 Valid oversize frames
          4064656 1023 byte frames                     0 System FCS error frames
        285633065 1518 byte frames                     0 RxPortFifoFull drop frame
       1429028633 Too large frames
                0 Good (1 coll) frames
                0 Good (>1 coll) frames
    The interface is Full-1000 and is configured :
    interface GigabitEthernet0/7
     description "SRV-001-PRD-VM1 - VMNic0"
     switchport trunk allowed vlan 11,12,99
     switchport mode trunk
     link state group 1 downstream
    end
    For the "too large frames", I have already read the post : https://supportforums.cisco.com/discussion/11034901/too-large-frames-what-does-mean-performance, so, I think it's not serious.
    But I don't know why some packets are dropped because the configuration seems good ...
    Can you help me please ?
    Thank you in advance !

    87752686 Valid frames, too large
    This is nothing.  You get this counters if the port(s) is/are configured as Dot1Q Trunking.  
    There is nothing to be worried about.

  • Error compiling Illustrator CS6 plugin on Mac OS 10.10 (Yosemite)

    Hi @all,
    if i try to compile a Illustrator (CS6) plugin on Mac OS 10.10 (Yosemite) and use the MacOS 10.5 SDK, I get the following error:
    /MySDKPath/Illustrator/cs6/illustratorapi/pica_sp/SPFiles.h:84:9: error: mac68k
          alignment pragma is not supported on this target
    #pragma options align=mac68k
    Did anybody know how to solve this problem?
    Thanks in advance
    Best Regards

    I'm surprised there's a 68K setting at all, given that CS6 had been on Intel architecture for so long. Have you had any luck since then?
    I tried compiling the sample AI6 plugins with OS X 10.8 (I think) and it worked fine, although I wasn't able to make any headway because the loss of ADM made for a very, very steep learning curve. Anyway, fast-forward a couple of years and I have time again to give this another shot, hoping to use Xcode to build a Mac interface, but I'm having a different puzzling error. I'm on a late 2012 iMac now with Yosemite 10.10.3. I downloaded Xcode 5.1.1 and am using that (after my system automatically updated to Xcode 6) and am getting an error:
    Carbon.h file not found
    Is it just not possible to compile for CS6 under Yosemite?
    I'd really, really appreciate any suggestions.
    Rick

  • 'Load Paper' error message even when paper is loaded in the front load tray

    Load Paper Error message -
    Printer type: HP OfficeJet 6500 Wireless All-in-One Printer
    (possibly other HP printers as well)
    This 'How-To' article will help you solve a 'Load Paper' error message even though there is paper in the front load tray. You can read this helpful article at http://mikeyates.com/wordpress/?cat=187
    This could also help other HP printers with no easy access to the drop down type rollers located inside the printer.
    Would appreciate any feedback if this worked for you or not.
    Thanks
    Mike

    This is what I found: printer eventually wants to see color ink after running months without.  Steps I followed were: remove ink cartridges. Remove printer head (raise handle at left) and clean (slosh bottom) in hot water, (did it 3 times) and wipe clean.  Replace with new/full color ink cartridges and black if it's got ink still. Run clean printer head program from panel continuously until you start seeing good solid ink flowing on test paper, may even run alignment program at this point.  Turn off printer, if you get Load paper error, hit OK, allow alignment to run, and if heads have been previously cleaned satisfactorily (all colors show up), alignment will show success, and the next time you start printer, no more load paper error.  Point being, the printer eventually wants to see or will look for color ink and in particular, cyan necessary for the alignment page, and without this the program will aparently project a load paper error and alignment failure.  (which you can get aroung by keep hitting OK and cancelling the alignment)!  This totally cured by problem of load paper and alignment failure.  Good luck and be patient, it may take some time to effective clean, I went through all color ink and will have to purchase more !

Maybe you are looking for

  • Problem with get in to iTunes store

    I Cant  get in to iTunes store from my iPhone or iPad  sól i can check accout history!

  • Web Analysis report error : Array Index out of range :1

    while running from workspace , below error is being thrown after making few changes to the layout (e.g. moving Measures from Page to Row ) though Design for HTML setting applied. Array Index out of range :1 These reports are running well in WA studio

  • How to eliminate drafts in Mail?

    For the last few months each time I prepare a message in Mail that takes more than a minute or so to compose the program saves a draft in the drafts folder.  Once I have sent the message the draft remains, forcing me to manually delete it.  The messa

  • Rating Scale (Likeart) question slide

    Hello cp experts! I wish to use the Question slide 'Rating Scale (likert)' at the end on the presentation to provide a feedback. Is it possible to report the student selection to LMS and view statistics over time? if so, how do I do that? I didn't ma

  • Admin password but nowhere to enter it

    any admin task is presenting me with the uac window to continue, type an administrator password, and then click yes" but there is no text field available to enter the required password all solutions I read point to I don't have admin rights, and then