Error in attaching to container node - The code returned was 404
I have a customer who has messed with their NTCWS and I'm trying to resurect it.
I've been able to setup the correct Remote Server, Crawler Web Service (.NET CWS etc), Data Source - Remote (.NET CWS Data Source), Crawler and Job etc., but the job always fails.
Here is the job log output:
12/13/04 16:33:49- Starting to run operations (1 total) for job 'Neil Test NTCWS Job'. Will stop on errors. (PID=6248)12/13/04 16:33:50- *** Job Operation #1 of 1: Crawler 'Neil Test NTCWS Crawler' [Run as owner 'Neil Gidley']12/13/04 16:33:50- Starting Crawler "Neil Test NTCWS Crawler" at 12/13/2004 4:33:50 PM.12/13/04 16:33:50- Crawler starting from scratch: Neil Test NTCWS Crawler12/13/04 16:33:50- Error in attaching to container node Crawler Start Node to get child documents and containers: IDispatch error #19880 (0x80044fa8): [The SOAP Connection stopped executing method urn:plumtree-com:ContainerProvider.Initialize after 1 attempt(s). Last error: The SOAP Connection has recieved an HTTP error while executing during connection attempt 1 of method urn:plumtree-com:ContainerProvider.Initialize!. The code returned was 404.]12/13/04 16:33:50- Crawler has experienced a fatal error (Could not attach provider to start node, crawl cannot proceed.), shutting down.12/13/04 16:33:50- Bulk import completed, resulting in the successful storage of 0 new cards.12/13/04 16:33:50- Could not attach provider to start node, crawl cannot proceed.12/13/04 16:33:50- *** Job Operation #1 failed: Could not attach provider to start node, crawl cannot proceed. (0x4)12/13/04 16:33:50- Done with job operations.12/13/04 16:33:50- Could not attach provider to start node, crawl cannot proceed.
Any ideas why I'd be receiving a 404 and causing the Job to Fail? The target crawl location is local to the portal itself - it is all installed on the same machine and the files we're trying to crawl are on the same machine.
i've created a share with read/write etc access by Everyone. The Data Source - Remote is using my domain/name account which has Logon As Batch abilities etc...and should be able to crawl these files.
My tcptrace says 'invalid hostname'.
I assume that is the hostname of the target given in the Crawler object of where it is trying to attach and not the hostname of the Remote Server where the NTCWS code resides in the CWS Web Service.
I've tried the following values:
\\CESRVPP01.eugene1.net\Neil
\\cesrvpp01\Neil
\\10.10.34.41\Neil
Here's the full tcpTrace output:
POST /ntcws/ContainerProviderSoapBinding.asmx HTTP/1.1Host: ceppdportal:9999Cache-Control: no-cachePragma: no-cacheSOAPAction: "urn:plumtree-com:ContainerProvider.Initialize"Content-Type: text/xml; charset="UTF-8"User-Agent: Mozilla/4.0 (compatible; MSIE 6.0 compatible; Plumtree 4.0; Windows NT)Accept: */*Accept-Encoding: gzipConnection: Keep-AliveContent-Length: 000002692
<?xml version='1.0' encoding='UTF-8'?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <SOAP-ENV:Body > <Initialize xmlns="urn:plumtree-com:ContainerProvider"> <DataSourceInfo > <NamedValue xmlns="http://www.plumtree.com/xmlschemas/xui/"> <name >PTC_MAX_FILE</name> <value >50000000</value> </NamedValue> <NamedValue xmlns="http://www.plumtree.com/xmlschemas/xui/"> <name >PTC_SOAP_USE</name> <value >LOCAL</value> </NamedValue> <NamedValue xmlns="http://www.plumtree.com/xmlschemas/xui/"> <name >PTC_SOAP_OPEN</name> <value >URL</value> </NamedValue> <NamedValue xmlns="http://www.plumtree.com/xmlschemas/xui/"> <name >PTC_FILE_PASS</name> <value >PUilp4ElTOdKWHrhA09aGhkjQ==</value> </NamedValue> <NamedValue xmlns="http://www.plumtree.com/xmlschemas/xui/"> <name >PTC_PBAGFORMAT</name> <value >1000</value> </NamedValue> <NamedValue xmlns="http://www.plumtree.com/xmlschemas/xui/"> <name >PTC_GATEWAY</name> <value >0</value> </NamedValue> <NamedValue xmlns="http://www.plumtree.com/xmlschemas/xui/"> <name >CSP-SESSION-TOKEN</name> <value >2498|1103050835|4QWhsGW/5APMi1aPx7R9arhbOdI=</value> </NamedValue> <NamedValue xmlns="http://www.plumtree.com/xmlschemas/xui/"> <name >PTC_FILE_USER</name> <value >CEDOM100\cedxnpg</value> </NamedValue> </DataSourceInfo> <CrawlInfo > <NamedValue xmlns="http://www.plumtree.com/xmlschemas/xui/"> <name >PTC_CRAWL_DEPTH</name> <value >1</value> </NamedValue> <NamedValue xmlns="http://www.plumtree.com/xmlschemas/xui/"> <name >PTC_FOLDER_NAME</name> <value >Neil</value> </NamedValue> <NamedValue xmlns="http://www.plumtree.com/xmlschemas/xui/"> <name >PTC_CDLANG</name> <value >en</value> </NamedValue> <NamedValue xmlns="http://www.plumtree.com/xmlschemas/xui/"> <name >PTC_PBAGFORMAT</name> <value >3000</value> </NamedValue> <NamedValue xmlns="http://www.plumtree.com/xmlschemas/xui/"> <name >PTC_UNIQUE</name> <value >\\CESRVPP01.eugene1.net\Neil</value> </NamedValue> </CrawlInfo> </Initialize> </SOAP-ENV:Body></SOAP-ENV:Envelope>--------------------------HTTP/1.1 400 Bad RequestContent-Type: text/htmlDate: Tue, 14 Dec 2004 18:55:38 GMTConnection: closeContent-Length: 39
<h1>Bad Request (Invalid Hostname)</h1>
Similar Messages
-
some one can help me please
i have no idea what i must to do.
an unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.The Exception Handler gave all the info that you need. No need to print the whole stack trace.
The exception handler says
Exception Details: java.lang.IllegalArgumentException
TABLE1.NAME
Look in the session bean (assuming that is where your underlying rowset is). Look in the _init() method for statements similar to the following:
personRowSet.setCommand("SELECT * FROM TRAVEL.PERSON");
personRowSet.setTableName("PERSON");
What do you have? -
I need to retrieve the code I was given to activate my creative suite design & web premium.
PLEASE can someone help me. I need to retrieve the code I was given to activate my creative suite design & web premium. I have got a new mac and it is only saying I have a 30 day trial.
Sign in, activation, or connection errors | CS5.5 and later
Find your serial number quickly
Mylenium -
I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
but that didn't gain me anything.
I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
PowerShell Error:
Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (:) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionStateBroken
winrs Error:
Winrs error:
WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config.Hi Adam,
I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
WSMAN/<NetBIOS name>
WSMAN/<FQDN>
If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
this to learn a bit more about selective trusts and whether or not it's affecting you.
Cheers,
Lain -
ADF error-"Row currency has changed since the user interface was rendered"
Hi,
I have created a ADf page and then created entity and view object for a table.
I have created fields which are binded to the the view object .
when i open the page after deploying it i get the following error
"Row currency has changed since the user interface was rendered. The expected row key was oracle.jbo.Key[]"
Please help me
Edited by: 798554 on Sep 28, 2010 10:45 PMThat's a common exception in ADF. If you click the browser back button, you can get this message. You could search for a solution in other posts, perhaps like that:
JBO-35007: Row currency has changed.. when Rollback fom a Dialog page
http://cn.forums.oracle.com/forums/thread.jspa?messageID=3913201
http://programming.itags.org/development-tools/68191/
You should also mention your JDev version!
NA
http://nickaiva.blogspot.com/ -
I am getting a photoshop error could not load photoshop because the preferences file was invalid and cln't load actions because of an unexpected end of file encountered.
Are you trying to open Photoshop directly, or open it by double clicking on a Photoshop document, like a PSD file? If the former, then you might need to reinstall. Resetting Preferences would be the firs step, but I am not sure if that will work if Photoshop is not opening in the first place.
Try doing so anyway. Hold down Shift Alt Ctrl (Shift Opt Cmd) while opening Photoshop. OK the message to delete Preferences.
If you get the unexpected end of file error while trying to open Photoshop via a PSD document, then there is more than a good chance that that file is toast.
If still stuck, we need to know Operating System, and Photoshop version. -
Used CS6 for a year or more, now says it's not registered! I have 1 or 2 unused keys but do not want to use them. Can't get the CS6 applications to open to enter the codes I was given when I first registered them...
You'll need to use web chat. This file shows you links to Web Chat:
Adobe ID, sign in, and account help -
My Macbook pro won't open downloaded programs, it just opens the code it was written in using the text and edit app. How can I fix this? I just bought the computer last month so this is some what frustrating.
If you are downloading .exe files, those are Windows programs, and will not run on your Mac unless you install Windows on it. (That is possible, if you need one of those apps.)
-
TS1292 The code which was sent to me to redeem OSX Mountain Lion is Invalid
Greetings,
The code which was sent to me to redeem OSX Mountain Lion is invalid.Contact: Contacting Apple for support and service
-
Where can I find the description of the codes returned by exitValue()?
Hi Everybody,
I have a java porgram on HP/UX and this program executes the OS level commands and exe file on HP UNIX. When I supply "/usr/bin ls -l" as a param to this program it executes it very well.
But if I pass the "/utils/Myapp/app arg1 arg2" as a parameter it returns some non zero codes
I tried several ways to make it work and I even harcoded the "/utils/Myapp/app arg1 arg2" in the program but it never executes it properly and I got the following return Code return by exitvalue() during my hit and trial method.
255,17,15,12
Does any one have clue what are they.
Note: When I executes /utils/Myapp/app arg1 arg2" from the UNIX prompt it works fine
The java program is given below.
Pl help
Thanks
Yatsomy.
This is my first program in JAVA.
import java.lang.Runtime;
import java.lang.Process;
import java.io.IOException;
import java.lang.InterruptedException;
class executecmd {
public static void main(String args[]) {
System.out.println("In main");
try {
/* Execute the command using the Runtime object and get the
Process which controls this command */
Process p = Runtime.getRuntime().exec(args[0]);
/* Use the following code to wait for the process to finish
and check the return code from the process */
try {
p.waitFor();
/* Handle exceptions for waitFor() */
} catch (InterruptedException intexc) {
System.out.println("Interrupted Exception on waitFor: " + intexc.getMessage());
System.out.println("Return code from process"+ p.exitValue());
System.out.println("Done executing");
/* Handle the exceptions for exec() */
} catch (IOException e) {
System.out.println("IO Exception from exec : " + e.getMessage());
e.printStackTrace();1. exitValue() codes are the numeric codes returned by native applications you're calling: the meaning of this code is both application and platform dependant (it has nothing to do with java), so you should try to find those info in "app" documentation, or in HP Unix standard docs.
2. I think you'd better "debug" the Runtime.exec() behaviour by capturing stdout and especially stderr of the spawned process: doing so, you will be able to see error messages printed out by called applications or commands...
It's very simple using this small class:
/** connects I/O streams, just like a pipe :-)
* @author: Giorgio Maone
class Pipe {
private InputStream in;
private OutputStream out;
public Pipe(InputStream in, OutputStream out) {
this.in=in; this.out=out;
public void connect() {
new Thread() {
public void run() {
try {
for(int b;(b=in.read())!=-1;) {
out.write(b);
out.flush();
} catch(IOException ex) {}
}.start();
}So you can do this:
Process p = Runtime.getRuntime().exec(args[0]);
new Pipe(p.getInputStream(),System.out).connect();
new Pipe(p.getErrorStream(),System.out).connect();
new Pipe(System.in,p.getOutputStream()).connect();
try {
System.out.println("Exit code: "+p.waitFor());
} catch(InterruptedException ex) {}If you want to use a "smart wrapper" on Runtime.exec(), feel free to use my MultiExec class:
/** executes multiple commands in one shell
* @author: Giorgio Maone
import java.io.*;
public class MultiExec {
static final boolean IS_WIN=System.getProperty("os.name").toLowerCase().indexOf("win")==0;
protected String shell=IS_WIN?"":"sh";
public void setShell(String s) {
shell=s;
public String getShell() {
return shell;
public Process exec(String cmds[]) throws IOException {
File f=File.createTempFile("muexec",".bat");
PrintWriter out=new PrintWriter(new FileWriter(f));
if(IS_WIN) out.println("@echo off");
for(int j=0,len=cmds.length; j<len; j++)
out.println(cmds[j]);
out.close();
f.deleteOnExit();
return Runtime.getRuntime().exec(shell+" "+f.getCanonicalPath());
public int execAndWait(String cmds[]) throws IOException {
Process p=exec(cmds);
new Pipe(p.getInputStream(),System.out).connect();
new Pipe(p.getErrorStream(),System.out).connect();
new Pipe(System.in,p.getOutputStream()).connect();
int exitCode=-1;
try {
exitCode=p.waitFor();
} catch(InterruptedException ex) {}
return exitCode;
static class Pipe {
private InputStream in;
private OutputStream out;
public Pipe(InputStream in, OutputStream out) {
this.in=in; this.out=out;
public void connect() {
new Thread() {
public void run() {
try {
for(int b;(b=in.read())!=-1;) {
out.write(b);
out.flush();
} catch(IOException ex) {}
}.start(); -
I'm getting these errors in the eventlog and ULS, "An operation failed because the following certificate has validation errors:\n\nSubject Name: CN=SharePoint Security Token Service, OU=SharePoint, O=Microsoft, C=US\nIssuer Name: CN=SharePoint Root
Authority, OU=SharePoint, O=Microsoft, C=US\nThumbprint: <STS CERTIFICATE THUMBPRINT>\n\nErrors:\n\n RevocationStatusUnknown: The revocation function was unable to check revocation for the certificate."
The errors point to the SharePoint Security Token Service as the issue ("The revocation function was unable to check revocation for the certificate") reported back by the Topology service. This is apparent when executing a search, accessing
the managed metadata service, issuing SPSite commands in Powershell, or anything that needs to run through the "SharePoint Web Services" site. I've looked at the certificate assigned to that site and everything appears to be in order.
It would seem to me to be either an incorrect endpoint configuration (internally cached perhaps?) or related to security access for the configuration database (in order to validate the certificate root).
What I’ve tried so far:
I’ve been all over the certificate settings, both in the server store, and within SharePoint Token Service config. Both appear to be configured correctly such that the root CAs can be validated.
Re-entered the passwords for the application pool domain accounts to eliminate these as a potential cause. I’ve also verified the service accounts reporting the error, do have access to the configuration database.
Re-provisioned the STS service to see if that might clear out any cached issues and validated everything else according to this
MS Tech note.
So far nothing has worked. Is there anything else I could be looking at that I've missed? (Full eventlog detail below)
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 2/20/2015 11:19:41 AM
Event ID: 8311
Task Category: Topology
Level: Error
Keywords:
User: <SP SERVICE ACCOUNT>
Computer: <SHAREPOINTSERVER>
Description:
An operation failed because the following certificate has validation errors:\n\nSubject Name: CN=SharePoint Security Token Service, OU=SharePoint, O=Microsoft, C=US\nIssuer Name: CN=SharePoint Root Authority, OU=SharePoint, O=Microsoft, C=US\nThumbprint: <STS
CERT THUMBPRINT>\n\nErrors:\n\n RevocationStatusUnknown: The revocation function was unable to check revocation for the certificate.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>8311</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>13</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2015-02-20T17:19:41.213852500Z" />
<EventRecordID>1611121</EventRecordID>
<Correlation />
<Execution ProcessID="10212" ThreadID="10328" />
<Channel>Application</Channel>
<Computer><SHAREPOINTSERVER></Computer>
<Security UserID="<SP SERVICE ACCOUNT>" />
</System>
<EventData>
<Data Name="string0">CN=SharePoint Security Token Service, OU=SharePoint, O=Microsoft, C=US</Data>
<Data Name="string1">CN=SharePoint Root Authority, OU=SharePoint, O=Microsoft, C=US</Data>
<Data Name="string2"><STS CERT THUMBPRINT></Data>
<Data Name="string3">RevocationStatusUnknown: The revocation function was unable to check revocation for the certificate.
</Data>
</EventData>
</Event>Hi Darren,
This problem seems to occur when an administrator deletes the local trust relationship of the farm from the Security section of the Central Administration website
In order to resolve this problem, the local trust relationship has to be created. This can be done by running the following PowerShell commands
$rootCert = (Get-SPCertificateAuthority).RootCertificate
New-SPTrustedRootAuthority -Name "localNew" -Certificate $rootCert
After running the above commands, perform an IISReset on all servers in the farm.
More information:
http://support.microsoft.com/kb/2545744
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support -
I bought photoshop card for three months use. Once I managed insert the code. Then I was asked again insert the code, when I do it again I was told the code already used. What should I do?
Launch iTunes. From the menu bar click Store / View My Account
Click: Edit Payment Information
Make sure you have the correct Security Code.
Then click: Done
And try resetting your Apple ID password. https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa -
How do I get help getting the right serial number to install my Photoshop elements software? I have tried entering the redemption code on the card in the box and even what is listed as a serial number on the receipt from the retailer I bought the software from. Nothing seems to be working and I keep getting the invalid code message.
Redemption Code Help
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html -
I get an error ORA-00900 when I run the code below.please assist
CREATE OR REPLACE PROCEDURE ib_DistributeCashonInv IS
v_cust varchar(8);
v_ref varchar(10);
v_custcode varchar(8);
v_item_no varchar(10);
v_item_ref varchar(10);
v_item_date date;
v_doc_amnt float;
v_unall_amnt float;
CURSOR c_cust IS
SELECT d.customer, d.refernce
FROM tbl_distribute d;
-- WHERE d.status ='D' ---Items marked for distribution
--ORDER BY d.customer,d.refernce;
CURSOR c_cash IS
SELECT s.customer,s.item_no,s.refernce,s.dated,s.amount,s.unall_amount
FROM slitemm s
WHERE s.customer = v_cust
AND s.refernce = v_ref;
BEGIN
OPEN cursor c_cust;
LOOP
FETCH c_cust INTO v_cust, v_ref;
exit when c_cust%NOTFOUND;
OPEN c_cash;
LOOP
FETCH c_cash INTO
v_custcode,v_item_no,v_item_ref,v_item_date,v_doc_amnt,v_unall_amnt;
exit when c_cash%NOTFOUND;
DECLARE v_total_allocated FLOAT :=0.00 ;
BEGIN
SELECT x.customer,x.batch_item_no,x.transaction_item,x.allocated_amount,x.second_ref,x.item_type
FROM slxrefm x
WHERE x.customer = v_cust
AND x.second_ref = v_ref;
IF SQL%FOUND THEN
BEGIN
SELECT sum(allocated_amount)
INTO v_total_allocated
FROM slxrefm
WHERE customer = v_cust
AND second_ref = v_ref
GROUP BY customer, second_ref;
UPDATE slitemm
SET unall_amount = v_total_allocated,open_indicator ='O'
WHERE customer = v_cust
AND refernce = v_ref;
COMMIT;
END
ELSIF SQL%NOTFOUND THEN
EXIT
END IF
END
END LOOP;
CLOSE c_cash;
END LOOP
CLOSE c_cust;
EXCEPTION
WHEN OTHERS THEN
raise_application_error(-20001,'An error was encountered - '||SQLCODE||' -ERROR- '||SQLERRM);
END ib_DistributeCashonInv;looks like you have a bunch of syntax errors.
also you have a commit inside of a loop
/* Formatted on 11/23/2011 2:27:59 PM (QP5 v5.149.1003.31008) */
CREATE OR REPLACE PROCEDURE ib_DistributeCashonInv
IS
v_cust VARCHAR (8);
v_ref VARCHAR (10);
v_custcode VARCHAR (8);
v_item_no VARCHAR (10);
v_item_ref VARCHAR (10);
v_item_date DATE;
v_doc_amnt FLOAT;
v_unall_amnt FLOAT;
CURSOR c_cust
IS
SELECT d.customer, d.refernce
FROM tbl_distribute d;
-- WHERE d.status ='D' ---Items marked for distribution
--ORDER BY d.customer,d.refernce;
CURSOR c_cash
IS
SELECT s.customer,
s.item_no,
s.refernce,
s.dated,
s.amount,
s.unall_amount
FROM slitemm s
WHERE s.customer = v_cust AND s.refernce = v_ref;
BEGIN
OPEN c_cust;
LOOP
FETCH c_cust
INTO v_cust, v_ref;
EXIT WHEN c_cust%NOTFOUND;
OPEN c_cash;
LOOP
FETCH c_cash
INTO v_custcode,
v_item_no,
v_item_ref,
v_item_date,
v_doc_amnt,
v_unall_amnt;
EXIT WHEN c_cash%NOTFOUND;
DECLARE
v_total_allocated FLOAT := 0.00;
BEGIN
SELECT x.customer,
x.batch_item_no,
x.transaction_item,
x.allocated_amount,
x.second_ref,
x.item_type
FROM slxrefm x
WHERE x.customer = v_cust AND x.second_ref = v_ref;
IF SQL%FOUND
THEN
BEGIN
SELECT SUM (allocated_amount)
INTO v_total_allocated
FROM slxrefm
WHERE customer = v_cust AND second_ref = v_ref
GROUP BY customer, second_ref;
UPDATE slitemm
SET unall_amount = v_total_allocated,
open_indicator = 'O'
WHERE customer = v_cust AND refernce = v_ref;
-- COMMIT;
END;
ELSIF SQL%NOTFOUND
THEN
EXIT;
END IF;
END;
END LOOP;
CLOSE c_cash;
END LOOP;
CLOSE c_cust;
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
raise_application_error (
-20001,
'An error was encountered - ' || SQLCODE || ' -ERROR- ' || SQLERRM);
END ib_DistributeCashonInv; -
I created a calculated column "Expiration Date" in SharePoint 2010 with formula, =IF([Contingent Hire]=TRUE,(Created+90),(IF([Contingent Hire]=FALSE," ")))
This works in the SharePoint list but when I go to edit the Edit Form in Designer. I get the error specified in the title of this post. I'm trying to make it so the Expiration Date is blank when another column, "Contingent Hire" (a YES/No
column) is FALSE.
The Edit Form is essentially a DataViewWebpart. If I remove the " ", like so, "(IF([Contingent Hire]=FALSE,))" from the calc column, the error goes away; however, the Expiration Date field does not
remain blank like I want it to.
Does anyone have any suggestions? (Below is the error generated when I open Designer and then try to open the Edit form for the corresponding list containing the calc column)
JackSki123Hi Jack,
Could you provide a screenshot about this issue?
As Dimitri suggested, you can install the update for your SharePoint Designer and check again.
And you can also check if you can display "NA" instead of " " in your calculated column per the following post.
http://rajeshspillai.blogspot.in/2012/03/server-returned-non-specific-error-when.html
Thanks
Daniel Yang
TechNet Community Support
Maybe you are looking for
-
Audio oddities on MacBook after sleep
Here's the deal: I had 4 tracks of dialog I was working on for an animated movie. Each track had different fx settings. After doing some editing and such I saved the project, and put the MacBook to sleep to go on to something else. When I returned la
-
Table Maintenance Generator giving Error in PRD.
Hello Experts, I am receiving below error in PRD for a Table Maintenance generator for Z-Table. PFA Screen Shot. My Query is that though the information icon narrates to goto T-code SE54 & Re-generate TMG for the specified Function group. Which Optio
-
Problem in starting Custom java application through opmnctl
Here is the details of the problem that I am facing. I hava one self-executable jar file which I want to run each time the application server will start. I have taken this idea after getting info from iasdocs.us.oracloe.com. The name of the jar file
-
Hi experts, can anyone please help me the physical architecture of SSAS. It will be very helpful for me to improve my skill. Thanks
-
Data Type for saving Base64 image string into SQL database
Hi Team! I have image base64 string to be save into sql database. I use Varchar(MAX) data type. The problem is there are certain image string that cannot be enter (paste) into the table (due to the size) then i need to resize the image then i can pas