Error in automatic processing of output of a delivery

Dear All,
In the stock tranport scenario, I am using an output type SPED in an outbound delivery. When this is processed an inbound delivery is created automatically from the outbound.
The problem is that the output is not being processed automatically. The error I get is "Output processing has been triggered in a new task".
Dispatch time is already maintained as 4. If I process the output manually using VL71, it works fine.
Any ideas!!
Regards,
VJ

I have already checked in SM58. I do not see anything there.
Details of the error:
Message no. /SPE/VL300
Diagnosis
    Output processing was triggered immediately when the delivery was saved.
    The actual processing of this output started a new task.
    This task might still be running - or might have terminated with an
    error.
Procedure
    You can wait for a while and then recheck the processing status.
    If the processing log has not been updated, please take a look at the
    monitor for tRFC calls (transaction code SM58).

Similar Messages

Error in automatic processing of output of an outbound delivery

Dear All,
In the stock tranport scenario, I am using an output type SPED in an outbound delivery. When this is processed an inbound delivery is created automatically from the outbound.
The problem is that the output is not being processed automatically. The error I get is "Output processing has been triggered in a new task".
Dispatch time is already maintained as 4. If I process the output manually using VL71, it works fine.
Any ideas!!
Regards,
VJ

SPED is having default Transmission Medium as 8 ( Special Function ) .
Can you change it to 1 and try.
thanks,

Automatic assignment of output message for delivery schedules changes

Hi,
we have defined an output type ZDSS for scheduling agreement release. For perticular Delivery schedule documents we are getting the below error.
Diagnosis
An unprocessed output exists (output type ZDSS) has been deactivated.
System Response
Output type ZDSS will no longer be determined.
It seems some user has set the unprocessed outpout type ZDSS of this document to deactive (permanent) status. I need to reactivate the auto assignment of output type for these documents.
Can someone let me know as to how can i reactivate this unprocessed output type OR delete this output type entry from the document?
Please suggest.
Regards,
Prashant

Hi,
Problem is solved on my own... Closing the message.
Regards,

Error handling -- automatic process chain

Hello Experts,
I need your suggestions.
1) I want to set up the error handling for the ILTC(Intiail load from the trusted client). Do I need to create a process chain to handle errors manually? or will the Process type 'Error handling for ILTC' collects and creates the process chain for the each object type?
2) Say some how the process chain for the error objects has started. How can the error objects be handled automatically ?
Thanks,

Dear Sweatha,
1 - You have to create a process chain with a start step, error handling step and a step to edit data and then a post step
2 - If error occurs during ILTC, the error handling chain will be started automatically. Data will be stored in the error handling step.
To process the error really you have to go to the error handling monitor and press the continue button. Data will be sent to the edit step. Here you can correct manually the errors.
Please find additional information in the SAP Help Portal: http://help.sap.com/saphelp_mdm300/helpdata/EN/88/454ba493cb43f1b74336772a7f3508/frameset.htm
Kind regards,
Markus

Error in processing the Output Type ZEML

Hello,
For the Purchase order , i have configured the output type ZEML in nace with medium as 'Simple Mail'. But when i process the message for ZEML in ME29n , it gives a n error saying ' Please maintain an output device in your user master data '.
can u suggest how can i resolve this.
Thanks,
sucharita

Hi Sucharita,
Steps to Maintain an output device in your user master record
1. From the menu,choose System --> User profiles --> Own Data
2. Select Default Tab of user profile and enter the output device in 'output device' field .
This should solve your problem.

Re: VF31 Billing Errors occurred while processing output MSG no VN073

Hi Joan,
Thanks for your time. In VF02 I can print the billing document correctly. Out of 45 bills in VF31 I could successfully got one bill only. Others gave me error. I am trying to investigate what is different for thiss one bill so it got clicked. I shall study the link but my problem is VF31 is not triggering billing output. I have given print and archive. To apply this link should I change to only Archive? Then how print will be possible? Give some thought on this & advise.
Thanks

Check the following note:-
Note 74767 - Log for interactive processing of outputs
G. Lakshmipathi

Need input for error caused while trggering a output type

I had created a custom program and assigned it to a custom output type. while processing this output type through VF01(billing doc) it is generating an error saying commit_in_posting. can anyone suggest in this regard........

1Check for VF01 is there any control routine written for this output type which blocks it from triggering this output.
2. are there any condition records maintained which are creating problems.
3 check the out put poecedures aslo....

XSL-1047: (Error) Invalid instantiation of 'xsl:output' in 'INSERT' context

Following is my development environment:
JDeveloper 9i Release Candidate
JDeveloper JVM 1.3.1
Oracle XML Parser v2 9.2.0.0.0
I'm using the Oracle XML Parser V2 9.2.0.0.0 library to apply a stylesheet to an XML document. However when I invoke the call to processor.processXSL() an XSLException is thrown with the following details:
oracle.xml.parser.v2.XSLException: <Line 1, Column 116>: XSL-1047: (Error) Invalid instantiation of 'xsl:output' in 'INSERT' context.
exception
Below is the sequence of events:
// Create an instance of XSLProcessor to perform the transformation
XSLProcessor processor = new XSLProcessor();
// create a Reader from a String object that contains the stylesheet text
StringReader r = new StringReader( stylesheet );
// create a new XSL stylesheet, passing it the Reader object reference
XSLStylesheet sheet = processor.newXSLStylesheet(r);
// apply the stylesheet
// the variable sheet represents the XSLStylesheet object
// the variable source represents the XMLDocument object
// this call throws the exception
DocumentFragment df =
processor.processXSL(sheet,source);
I've included the Stylesheet and source XML file I'm processing below.
Note: My application works fine when I use the Oracle XML Parser v2 9.0.1 library. (although I have to use new XSLStylesheet() in place of XSLProcessor.newXSLStylesheet())
Any ideas on what has changed between the two releases? I do have a reproducible test case that I can send on if required?
thanks in advance
private String stylesheet =
"<INSERT xsl:version=\"1.0\" xmlns:xsl=\"http://www.w3.org/1999/XSL/Transform\"> "+
"<xsl:output method=\"xml\" indent=\"yes\"/> "+
"<ROWSET table_name=\"acc_database\"> "+
" <xsl:for-each select=\"DATABASES/DATABASE\"> "+
" <ROW> "+
" <DBID><xsl:value-of select=\"DBID\"/></DBID> "+
" <DBNAME><xsl:value-of select=\"DBNAME\"/></DBNAME> "+
" <DBSIZE><xsl:value-of select=\"DBSIZE\"/></DBSIZE> "+
" <DBPATHNAME><xsl:value-of select=\"DBPATHNAME\"/></DBPATHNAME> "+
" <DBUSER><xsl:value-of select=\"DBUSER\"/></DBUSER> "+
" <DBPASSWORD><xsl:value-of select=\"DBPASSWORD\"/></DBPASSWORD> "+
" <ISAPPDB><xsl:value-of select=\"ISAPPDB\"/></ISAPPDB> "+
" <ISATTACHEDDB><xsl:value-of select=\"ISATTACHEDDB\"/></ISATTACHEDDB> "+
" <CONVERTDB><xsl:value-of select=\"CONVERTDB\"/></CONVERTDB> "+
" <VERSION><xsl:value-of select=\"VERSION\"/></VERSION> "+
" </ROW> "+
" </xsl:for-each> "+
"</ROWSET> "+
"</INSERT>";
<?xml version="1.0" encoding="ISO-8859-1"?>


<DATABASES>
<DATABASE>
<DBID>1</DBID>
<DBNAME>xmltest</DBNAME>
<DBSIZE>1</DBSIZE>
<DBPATHNAME>E:\xmltest.mdb</DBPATHNAME>
<DBUSER>xmltest</DBUSER>
<DBPASSWORD>oracle</DBPASSWORD>
<ISAPPDB>1</ISAPPDB>
<ISATTACHEDDB>0</ISATTACHEDDB>
<CONVERTDB>1</CONVERTDB>
<VERSION>4.0</VERSION>
<TABLES>
<TABLE PRIMARY_KEY="1">
<TBLID>1</TBLID>
<DBID>1</DBID>
<TBLNAME>xsu_test</TBLNAME>
<CNVTABLESTRUCT>1</CNVTABLESTRUCT>
<CNVMOVEDATA>1</CNVMOVEDATA>
<CNVRI>1</CNVRI>
<CNVVALIDATION>1</CNVVALIDATION>
<CNVDEFAULT>1</CNVDEFAULT>
<CNVADDTIMESTAMP>1</CNVADDTIMESTAMP>
<ATTACHTABLEBACKTOACCESS>1</ATTACHTABLEBACKTOACCESS>
<SAVEPASSWORD>0</SAVEPASSWORD>
<CNVMAKEUPDATEABLE>1</CNVMAKEUPDATEABLE>
<RETAINLOCALCOPY>0</RETAINLOCALCOPY>
<SYNCWITHSERVER>1</SYNCWITHSERVER>
<OWNERID>1</OWNERID>
<VALIDATIONTEXT></VALIDATIONTEXT>
<VALIDATIONRULE></VALIDATIONRULE>
<NUMBEROFROWS>1</NUMBEROFROWS>
<CACHINGTABLE>0</CACHINGTABLE>
<DESCRIPTION></DESCRIPTION>
<COLUMNS>
<COLUMN>
<COLID>1</COLID>
<TBLID>1</TBLID>
<COLNAME>id</COLNAME>
<COLTYPE>4</COLTYPE>
<COLTYPEDESC>Long</COLTYPEDESC>
<COLAUTOINCR>1</COLAUTOINCR>
<NEXTCOUNTERVALUE>0</NEXTCOUNTERVALUE>
<MAXLENGTHSOURCE>0</MAXLENGTHSOURCE>
<AVGLENGTHSOURCE>0</AVGLENGTHSOURCE>
<COLTEXTSIZE>4</COLTEXTSIZE>
<ALLOWZEROLENGTH>0</ALLOWZEROLENGTH>
<DEFAULTVALUE></DEFAULTVALUE>
<COLREQUIRED>1</COLREQUIRED>
<COLCOLLATINGORDER>1033</COLCOLLATINGORDER>
<COLORDPOSITION>1</COLORDPOSITION>
<VALIDATIONRULE></VALIDATIONRULE>
<VALIDATIONTEXT></VALIDATIONTEXT>
<COLUMNDESCRIPTION></COLUMNDESCRIPTION>
</COLUMN>
<COLUMN>
<COLID>2</COLID>
<TBLID>1</TBLID>
<COLNAME>name</COLNAME>
<COLTYPE>10</COLTYPE>
<COLTYPEDESC>Text</COLTYPEDESC>
<COLAUTOINCR>0</COLAUTOINCR>
<NEXTCOUNTERVALUE>0</NEXTCOUNTERVALUE>
<MAXLENGTHSOURCE>0</MAXLENGTHSOURCE>
<AVGLENGTHSOURCE>0</AVGLENGTHSOURCE>
<COLTEXTSIZE>50</COLTEXTSIZE>
<ALLOWZEROLENGTH>0</ALLOWZEROLENGTH>
<DEFAULTVALUE></DEFAULTVALUE>
<COLREQUIRED>1</COLREQUIRED>
<COLCOLLATINGORDER>1033</COLCOLLATINGORDER>
<COLORDPOSITION>2</COLORDPOSITION>
<VALIDATIONRULE></VALIDATIONRULE>
<VALIDATIONTEXT></VALIDATIONTEXT>
<COLUMNDESCRIPTION></COLUMNDESCRIPTION>
</COLUMN>
</COLUMNS>
<INDEXES>
<INDEX>
<INDID>1</INDID>
<TBLID>1</TBLID>
<DBID>1</DBID>
<INDNAME>id</INDNAME>
<CNVINDEX>1</CNVINDEX>
<ISPRIMARY>0</ISPRIMARY>
<ISUNIQUE>0</ISUNIQUE>
<ISFOREIGN>0</ISFOREIGN>
<IGNORENULLS>0</IGNORENULLS>
<ISREQUIRED>0</ISREQUIRED>
<INDEX_COLUMNS>
<INDEX_COLUMN>
<INDCOLID>1</INDCOLID>
<INDID>1</INDID>
<COLID>1</COLID>
<COLORDER>1</COLORDER>
</INDEX_COLUMN>
</INDEX_COLUMNS>
</INDEX>
<INDEX>
<INDID>2</INDID>
<TBLID>1</TBLID>
<DBID>1</DBID>
<INDNAME>PK_xsu_test</INDNAME>
<CNVINDEX>1</CNVINDEX>
<ISPRIMARY>1</ISPRIMARY>
<ISUNIQUE>1</ISUNIQUE>
<ISFOREIGN>0</ISFOREIGN>
<IGNORENULLS>0</IGNORENULLS>
<ISREQUIRED>1</ISREQUIRED>
<INDEX_COLUMNS>
<INDEX_COLUMN>
<INDCOLID>2</INDCOLID>
<INDID>2</INDID>
<COLID>1</COLID>
<COLORDER>1</COLORDER>
</INDEX_COLUMN>
</INDEX_COLUMNS>
</INDEX>
</INDEXES>
</TABLE>
</TABLES>
<RELATIONS>
</RELATIONS>
</DATABASE>
<ATTACHED_TABLES>
</ATTACHED_TABLES>
</DATABASES>

Your problem is that your stylesheet is illegal.
You're using the "simple form" of the stylesheet which
is equivalent to having a single root template.
If you use the simple form, you cannot use: <xsl:include>,
<xsl:import>, <xsl:output>, <xsl:param>
or any other <xsl:XXX> element which must be at the "top-level"
of the stylesheet.
The solution is to change from:
<INPUT xsl:version="1.0" xmlns:xsl="...">
   <xsl:output>
</INPUT>.
which is illegal to:
<xsl:stylesheet version="1.0" xmlns:xsl="...">
    <xsl:output>
    <xsl:template match="/">
      <INPUT>
      </INPUT>
    </xsl:template>
</xsl:stylesheet>

Socket Adapter Request-Reply ~ Error occured in processing client request ~

Dear Friends,
Need your help in resolving a Issue regarding Socket Adapter Request/Reply.
We have a requirement to recieve Message from a External Vendor using Socket based communication,to achieve this Created a Process which has Socket Adapter Inbound Synchronous Request-Reply. I have also created a sample Outbound Service to test and it was able to send & Receive Message Sucessfuly .
When i try to Recieve a Message from the External Vendor on Port 8008 in this I am unable to receive the message(No Bpel Instance Created) message coming to the SOA Server, in the logs I can see Below Error-
Socket Adapter ClientProcessor:run() Error occured in processing client request
Socket Schema Translation Error.
Error while trying to translate from native.
Please ensure that the schemas are set up with native annotations and comply with the output XML. Contact Oracle support if error is not fixable.
Pls. find my Input XSD Below-
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://TargetNamespace.com/InboundService"
targetNamespace="http://TargetNamespace.com/InboundService"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII"
>
<xsd:element name="R1">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="C1" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
Sample Incoming Message-
<?xml version="1.0" encoding="UTF-8"?>
<ExitRequest>
<ExitRequestID>1234</ExitRequestID>
<Timestamp>28-11-2012 01:19:11</Timestamp>
<ActiveTagData>23456</ActiveTagData>
<DriverID>5555</DriverID>
<LicensePlate>6546</LicensePlate>
<DriverName> Sujit Nair</DriverName>
<DriverDOB>06-06-2012</DriverDOB>
<DriverEmployer>Testing</DriverEmployer>
<DriverSex>Male</DriverSex>
<DriverLang>ENGLISH</DriverLang>
<DriverNationality>TEST</DriverNationality>
<LaneID>Gate Testing</LaneID>
<CardReaderID>07700</CardReaderID>
</ExitRequest>
Can anyone pls. help me on this , still not able to understand what I am doing wrong. Pls. let me know if any other details required.
Thanks,
Sujit Nair

Hi,
You don't need a NSXD (Native Format Builder) to receive a message that is XML already, and the NXSD you listed above has nothing to do with the sample incoming message. So, no surprises it is complaining "Error while trying to translate from native.".
You have to fix the incoming message element on the Socket Adapter.
Cheers,
Vlad

ERROR: TF246021: An error occurred while processing your request.

Since last week the CI build on our integration branch fails when setting the label for the branch, I tried to create a new (default) build definition, which fails with the same error. Any other branch can build successful. We get the following error:
Exception Message: TF246021: An error occurred while processing your request.
Technical information (for administrator):
SQL Server Error: 2601 (type VersionControlException)
Exception Stack Trace:
Server stack trace:
at Microsoft.TeamFoundation.Client.Channels.TfsHttpClientBase.HandleReply(TfsClientOperation operation, TfsMessage message, Object[]& outputs)
at Microsoft.TeamFoundation.VersionControl.Client.Repository5.LabelItem(String workspaceName, String workspaceOwner, VersionControlLabel label, LabelItemSpec[] labelSpecs, LabelChildOption children, Int32 maxClientPathLength, Failure[]& failures)
at Microsoft.TeamFoundation.VersionControl.Client.WebServiceLayer.LabelItem(String workspaceName, String workspaceOwner, VersionControlLabel label, LabelItemSpec[] labelSpecs, LabelChildOption children, Failure[]& failures)
at Microsoft.TeamFoundation.VersionControl.Client.VersionControlServer.CreateLabel(VersionControlLabel label, LabelItemSpec[] itemSpecs, LabelChildOption options, Failure[]& failures)
at Microsoft.TeamFoundation.Build.Workflow.Activities.TfLabel.TfLabelInternal.RunCommand(VersionControlScope versionControlScope, String nonFatalError, VersionControlLabel label, IEnumerable`1 items, LabelChildOption childOption)
at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
at System.Func`6.EndInvoke(IAsyncResult result)
at Microsoft.TeamFoundation.Build.Workflow.Activities.TfLabel.TfLabelInternal.EndExecute(AsyncCodeActivityContext context, IAsyncResult result)
at System.Activities.AsyncCodeActivity`1.System.Activities.IAsyncCodeActivity.FinishExecution(AsyncCodeActivityContext context, IAsyncResult result)
at System.Activities.AsyncCodeActivity.CompleteAsyncCodeActivityData.CompleteAsyncCodeActivityWorkItem.Execute(ActivityExecutor executor, BookmarkManager bookmarkManager)
Inner Exception Details:
Exception Message: TF246021: An error occurred while processing your request.
Technical information (for administrator):
SQL Server Error: 2601 (type SoapException)SoapException Details: <soap:Detail xmlns:soap="http://www.w3.org/2003/05/soap-envelope" />
Exception Stack Trace:
When I manually create a Label on the branch it works fine, please advice?
additional information:
By changing "Label sources" to false the build does complete. Does SQL Server Error: 2601 indicate a duplicate key error in the TFS database?
(Cannot insert duplicate key row in object '%.*ls' with unique index '%.*ls'.)
see also: https://technet.microsoft.com/en-us/library/aa258747(v=sql.80).aspx

Hi,
For this issue, you can check if you can connect to TFS and perform operations on other client machines. If yes, the problem related to your environment.
You can also delete the current workspace and cretea a new one, then do a workspace mapping. To delete the workspace, use tf workspace or delete it via Team Explorer. If the problem still exist, please let us know your environment, settings etc. for further
investigation.
Best regards,

Error occurred while processing the "sales" partition of the "sales" measure group in the cube

Hi
when i ran the job for processing the cube it showing the error like "error occurred while processing the sales partition of the sales measure group in the cube". but in log files no error massage was there. after get that error message we ran
the cube manually
at that time the cube executed successfully.
my aim when the job was run it will be process automatically but it is not like that.
can you suggest the solution.
thank you
satyak248

Hi Satyak248,
According to your description, you get the error when using Windows Task to process a cube on a schedule, however can process the cube on SSMS successful manually, right?
In your scenario, you can process the cube manually, the issue can be cause by Windows Task was not set correctly. So you can try to process the cube using SSIS package. The Analysis Services Processing Task in SQL Server Integration Services (SSIS) allows
for the processing of one to many to all Analysis Services objects in an SSIS package. Once the SSIS package is created, then a job can be created within the SQL Server Management Studio which will allow for scheduling.
http://www.mssqltips.com/sqlservertip/2994/configuring-the-analysis-services-processing-task-in-sql-server-2012-integration-services/
Regards,
Charlie Liao
TechNet Community Support

Error deploying BPEL process

Hi,
I am following the SOA Order booking tutorial (chapter 7: Creating the SelectManufacturer Project).
When I try to build the BPEL Process, I get the following error:
Buildfile: C:\Jdev10g\jdev\SOADEMOLAB\SelectManufacturer\build.xml
pre-build:
validateTask:
[echo]
| Validating workflow
[validateTask] Validation of workflow task definitions is completed without errors
compile:
[echo]
| Compiling bpel process SelectManufacturer, revision 1.0
[bpelc] home directory is: C:\Jdev10g\/integration/bpel
[bpelc] loading WSDLs ...
[bpelc] reading partner SelectService's WSDL at C:\Jdev10g\jdev\SOADEMOLAB\SelectManufacturer\bpel\SelectManufacturer.wsdl
[bpelc] done reading wsdl for partner: SelectService
[bpelc] <WSDLSchemaUtil::loadAllSchemas> loading all schemas for def file:/C:/Jdev10g/jdev/SOADEMOLAB/SelectManufacturer/bpel/SelectManufacturer.wsdl
[bpelc] <WSDLSchemaUtil::loadLocalSchemas> Created schema schema
[bpelc] validating "file:/C:/Jdev10g/jdev/SOADEMOLAB/SelectManufacturer/bpel/SelectManufacturer.wsdl" ...
[bpelc] validating "C:\Jdev10g\jdev\SOADEMOLAB\SelectManufacturer\bpel\SelectManufacturer.bpel" ...
[bpelc] <process/> at line 27
[bpelc] <partnerLinks/> at line 47
[bpelc] <partnerLink/> at line 50
[bpelc] <variables/> at line 52
[bpelc] <variable/> at line 54
[bpelc] <variable/> at line 56
[bpelc] <sequence/> at line 58
[bpelc] <receive/> at line 61
[bpelc] <assign/> at line 62
[bpelc] <copy/> at line 63
[bpelc] <from/> at line 64
[bpelc] bpel parsing failed
[bpelc] java.lang.NullPointerException
[bpelc]      at com.collaxa.cube.lang.compiler.bpel.XPathExprValidatorVisitor.rectifyGetDataFunctionAndAssert(XPathExprValidatorVisitor.java:994)
[bpelc]      at com.collaxa.cube.lang.compiler.bpel.XPathExprValidatorVisitor.assertGetVariableData(XPathExprValidatorVisitor.java:1155)
[bpelc]      at com.collaxa.cube.lang.compiler.bpel.XPathExprValidatorVisitor.visit(XPathExprValidatorVisitor.java:730)
[bpelc]      at org.collaxa.thirdparty.jaxen.expr.DefaultFunctionCallExpr.accept(DefaultFunctionCallExpr.java:234)
[bpelc]      at com.collaxa.cube.lang.compiler.bpel.XPathExprValidatorVisitor.printLhsRhs(XPathExprValidatorVisitor.java:435)
[bpelc]      at com.collaxa.cube.lang.compiler.bpel.XPathExprValidatorVisitor.visit(XPathExprValidatorVisitor.java:465)
[bpelc]      at com.collaxa.cube.lang.compiler.bpel.XPathExprValidatorVisitor.visitExpr(XPathExprValidatorVisitor.java:312)
[bpelc]      at com.collaxa.cube.lang.compiler.bpel.XPathExprValidatorVisitor.assertGeneralExpr(XPathExprValidatorVisitor.java:128)
[bpelc]      at com.collaxa.cube.lang.compiler.bpel.AssignValidator.assertGeneralExpression(AssignValidator.java:197)
[bpelc]      at com.collaxa.cube.lang.compiler.bpel.AssignValidator.assertGeneralExpression(AssignValidator.java:183)
[bpelc]      at com.collaxa.cube.lang.compiler.bpel.AssignValidator.assertFrom(AssignValidator.java:271)
[bpelc]      at com.collaxa.cube.lang.compiler.bpel.BpelParser.parseFrom(BpelParser.java:2888)
[bpelc]      at com.collaxa.cube.lang.compiler.bpel.BpelParser.startElement(BpelParser.java:640)
[bpelc]      at org.collaxa.thirdparty.apache.xerces.parsers.AbstractDOMParser.emptyElement(AbstractDOMParser.java:1139)
[bpelc]      at org.collaxa.thirdparty.apache.xerces.impl.XMLNSDocumentScannerImpl.scanStartElement(XMLNSDocumentScannerImpl.java:312)
[bpelc]      at org.collaxa.thirdparty.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(XMLDocumentFragmentScannerImpl.java:1534)
[bpelc]      at org.collaxa.thirdparty.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:338)
[bpelc]      at org.collaxa.thirdparty.apache.xerces.parsers.XML11Configuration.parse(XML11Configuration.java:827)
[bpelc]      at org.collaxa.thirdparty.apache.xerces.parsers.XML11Configuration.parse(XML11Configuration.java:757)
[bpelc]      at org.collaxa.thirdparty.apache.xerces.parsers.XMLParser.parse(XMLParser.java:148)
[bpelc]      at org.collaxa.thirdparty.apache.xerces.parsers.DOMParser.parse(DOMParser.java:186)
[bpelc]      at com.collaxa.cube.lang.compiler.bpel.BpelParser.parse(BpelParser.java:401)
[bpelc]      at com.collaxa.cube.lang.compiler.bpel.BPELValidator.validate(BPELValidator.java:138)
[bpelc]      at com.collaxa.cube.lang.compiler.bpel.BPELValidator.validateClientSide(BPELValidator.java:80)
[bpelc]      at com.collaxa.cube.lang.compiler.CubeProcessor.validateClientSide(CubeProcessor.java:1130)
[bpelc]      at com.collaxa.cube.lang.compiler.CubeProcessor.transformClientSide(CubeProcessor.java:449)
[bpelc]      at com.collaxa.cube.lang.compiler.CubeParserHelper.compileClientSide(CubeParserHelper.java:83)
[bpelc]      at com.collaxa.cube.ant.taskdefs.Bpelc.execute(Bpelc.java:626)
[bpelc]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[bpelc]      at org.apache.tools.ant.Task.perform(Task.java:364)
[bpelc]      at org.apache.tools.ant.Target.execute(Target.java:341)
[bpelc]      at org.apache.tools.ant.Target.performTasks(Target.java:369)
[bpelc]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
[bpelc]      at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
[bpelc]      at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
[bpelc]      at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
[bpelc]      at oracle.jdevimpl.ant.runner.AntLauncher.launch(AntLauncher.java:321)
[bpelc]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[bpelc]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[bpelc]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[bpelc]      at java.lang.reflect.Method.invoke(Method.java:585)
[bpelc]      at oracle.jdevimpl.ant.runner.InProcessAntStarter.runAnt(InProcessAntStarter.java:295)
[bpelc]      at oracle.jdevimpl.ant.runner.InProcessAntStarter.mav$runAnt(InProcessAntStarter.java:43)
[bpelc]      at oracle.jdevimpl.ant.runner.InProcessAntStarter$1.run(InProcessAntStarter.java:71)
[bpelc] ORABPEL-01021
[bpelc]
[bpelc] BPEL validation failed.
[bpelc] BPEL source validation failed, the errors are:
[bpelc]
[bpelc] [Error ORABPEL-10902]: compilation failed
[bpelc] [Description]: in "C:\Jdev10g\jdev\SOADEMOLAB\SelectManufacturer\bpel\SelectManufacturer.bpel", XML parsing failed because "".
[bpelc] [Potential fix]: n/a.
[bpelc] .
[bpelc]
[bpelc]      at com.collaxa.cube.lang.compiler.CubeProcessor.validateClientSide(CubeProcessor.java:1133)
[bpelc]      at com.collaxa.cube.lang.compiler.CubeProcessor.transformClientSide(CubeProcessor.java:449)
[bpelc]      at com.collaxa.cube.lang.compiler.CubeParserHelper.compileClientSide(CubeParserHelper.java:83)
[bpelc]      at com.collaxa.cube.ant.taskdefs.Bpelc.execute(Bpelc.java:626)
[bpelc]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[bpelc]      at org.apache.tools.ant.Task.perform(Task.java:364)
[bpelc]      at org.apache.tools.ant.Target.execute(Target.java:341)
[bpelc]      at org.apache.tools.ant.Target.performTasks(Target.java:369)
[bpelc]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
[bpelc]      at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
[bpelc]      at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
[bpelc]      at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
[bpelc]      at oracle.jdevimpl.ant.runner.AntLauncher.launch(AntLauncher.java:321)
[bpelc]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[bpelc]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[bpelc]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[bpelc]      at java.lang.reflect.Method.invoke(Method.java:585)
[bpelc]      at oracle.jdevimpl.ant.runner.InProcessAntStarter.runAnt(InProcessAntStarter.java:295)
[bpelc]      at oracle.jdevimpl.ant.runner.InProcessAntStarter.mav$runAnt(InProcessAntStarter.java:43)
[bpelc]      at oracle.jdevimpl.ant.runner.InProcessAntStarter$1.run(InProcessAntStarter.java:71)
[bpelc] BPEL validation failed.
[bpelc] BPEL source validation failed, the errors are:
[bpelc]
[bpelc] [Error ORABPEL-10902]: compilation failed
[bpelc] [Description]: in "C:\Jdev10g\jdev\SOADEMOLAB\SelectManufacturer\bpel\SelectManufacturer.bpel", XML parsing failed because "".
[bpelc] [Potential fix]: n/a.
[bpelc] .
[bpelc]
BUILD FAILED
C:\Jdev10g\jdev\SOADEMOLAB\SelectManufacturer\build.xml:61: Validation error
Total time: 6 seconds
Any clue how to fix it?
<target name="compile">
<echo>
| Compiling bpel process ${process.name}, revision ${rev}
</echo>
<bpelc input="${process.dir}/bpel/bpel.xml" out="${process.dir}/output" rev="${rev}" home="${bpel.home}" />
</target>
This is the segment corresponding to line 61 in build.xml.
Thanks,
Ashish

Hi,
Yes, this is the first time I am using ANT for deployment. This is the content of ant-orabel.properties
## ant-orabpel.properties contains commonly used installation and appserver ##
## specific properties. They contains replace tokens, which gets replaced by ##
## appropriate values during installation ##
## VERIFY THAT THESE PROPERTIES MATCHES YOUR ENVIRONMENT ##
##### Properties for used for process deployment #####
# Which is app server going to use on this machine?
platform = ias_10g
# hostname, http.port must match with values for http url for BPEL engine, i.e.
# property soapServerUrl defined in collaxa-config.xml
hostname = Ashish
http.hostname = ${hostname}
http.port = 8888
# For BPEL in cluster environemnt, j2ee.hostname may not be same as
# http.hostname, where j2ee.hostname will be local hostname,
# while http.hostname will be virtual hostname
# For deployment of applications in oc4j cluster, set cluster = true
# and oc4jinstancename to opmn cluster group it belongs to such as
# default_group.
cluster = false
oc4jinstancename = home
j2ee.hostname = Ashish
# rmi.port or opmn.requestport is used in jndi.url/deployment-url in
# standalone or midtier installation respectively.
# rmi.port value below is default value as in BPEL standalone-developer install.
# If you rely on this value, make sure it's correct for your installation
# as from command "opmnctl status -l" output in midtier/SOA install.
rmi.port = 23791
opmn.requestport = 6003
# make sure admin.user, admin.password is correct for [PLATFORM] appserver
admin.user = oc4jadmin
admin.password = welcome1
# DONOT use jndi.user, jndi.password as they will get deprecated
jndi.user = ${admin.user}
jndi.password = ${admin.password}
asinstancename =
# default domain and bpel process revision for deployment
domain = default
rev = 1.0
# Set verbose to true if you want to see verbose output from deployment tasks
verbose = false
##### End of Properties for used for process deployment #####
# Where the j2ee applications can be deployed, this environment variable
# is application server dependent. The process developers will use this
# this env. variable to deploy their J2EE applications
# (e.g. .war or .ear files)
apps = C:/SOASuite10g/product/10.1.3.1/OracleAS_1/j2ee/home/applications
# default-web-app.dir is directory pointing to url http://http.host:http.port/
default-web-app.dir = C:/SOASuite10g/product/10.1.3.1/OracleAS_1/j2ee/home/applications/../default-web-app
##### Properties for used for process testing #####
bpeltest.minCoverage = 100%
bpeltest.timeout = 90
bpeltest.numWorkers = 1
bpeltest.package =
bpeltest.results.dir = ${default-web-app.dir}${file.separator}results
##### End of Properties for used for process testing #####
# Oracle BPEL Version and Build info as also reported by obversion[.sh] command
bpel.version = 10.1.3.1.0
bpel.build = PCBPEL_10.1.3.1.0_GENERIC_061009.0802
# Where has Orabpel been installed on this machine?
bpel.home = C:/SOASuite10g/product/10.1.3.1/OracleAS_1/bpel
# oracle.home is useful for ias/midtier
oracle.home = C:/SOASuite10g/product/10.1.3.1/OracleAS_1/bpel/..
# ias_10g appserver specific j2ee.home
j2ee.home = C:/SOASuite10g/product/10.1.3.1/OracleAS_1/bpel/../j2ee/home
# ias_10g appserver specific jndi.url
jndi.url = opmn:ormi://Ashish:6003:home
# ias_10g appserver specific jndi.InitialContextFactory
jndi.InitialContextFactory = com.evermind.server.rmi.RMIInitialContextFactory
soapServerUrl = http://${hostname}:${http.port}
# Properties for ORABPEL dehydration store's DB connection as supplied during
# installation of BPEL in midtier or SOA installation i.e. these would not
# be set in case of standalone developer installation.
orabpel.db.user = [DB_USERNAME]
orabpel.db.password = [DB_PASSWORD]
orabpel.db.connect_string = [DB_CONNECT_STRING]
# [platform] appserver specific client.classpath
client.classpath = C:/SOASuite10g/product/10.1.3.1/OracleAS_1/bpel/../j2ee/home/oc4jclient.jar;C:/SOASuite10g/product/10.1.3.1/OracleAS_1/bpel/../j2ee/home/../../lib/xml.jar;C:/SOASuite10g/product/10.1.3.1/OracleAS_1/bpel/../j2ee/home/rmic.jar;C:/SOASuite10g/product/10.1.3.1/OracleAS_1/bpel/../j2ee/home/../../lib/dms.jar;C:/SOASuite10g/product/10.1.3.1/OracleAS_1/bpel/../j2ee/home/oc4j.jar;C:/SOASuite10g/product/10.1.3.1/OracleAS_1/bpel/../j2ee/home/lib/jmxri.jar;C:/SOASuite10g/product/10.1.3.1/OracleAS_1/bpel/../j2ee/home/lib/javax77.jar;C:/SOASuite10g/product/10.1.3.1/OracleAS_1/bpel/../j2ee/home/admin_client.jar;C:/SOASuite10g/product/10.1.3.1/OracleAS_1/bpel/lib/orabpel.jar;C:/SOASuite10g/product/10.1.3.1/OracleAS_1/bpel/lib/orabpel-common.jar;C:/SOASuite10g/product/10.1.3.1/OracleAS_1/bpel/lib/orabpel-thirdparty.jar
# END OF FILE

Error in stream process

Hi all!
I have this problem with the streams and I don't know what happened!!
The stream process worked fine till a couple of hour ago...and then...after a stress test this error raised!
any idea???
thanks!
milena
*** SESSION ID:(17.28) 2005-04-27 10:32:40.311
bq: kwqppscbk: Add PSE: qid: 8901, dest: SCSINCUS
*** 2005-05-03 13:08:42.108
error 4068 in STREAMS process
ORA-04068: existing state of packages has been discarded
ORA-04061: existing state of package body "SYS.DBMS_AQADM_SYS" has been invalidated
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 1
OPIRIP: Uncaught error 447. Error stack:
ORA-00447: fatal error in background process
ORA-04068: existing state of packages has been discarded
ORA-04061: existing state of package body "SYS.DBMS_AQADM_SYS" has been invalidated
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 1

A deadlock occurs when two locks are dependant on each other.
This is unlikely to be the case here.
With out your exact command line or what your output is or if you have a dealock we will need to see the thread dump which displays where the deadlock is.

CFG0008: Error occured while processing. Possible Cause: URN_NOT_FOUND : urn "JRM" : Not

Dears , Kindly advise
I have a server running Ciscoworks LMS 4.2.3 version. Server has been working without any issues.
Now when I try to go into Netconfig Jobs, I get the following popup:
CFG0008: Error occured while processing.
Possible Cause: URN_NOT_FOUND : urn "JRM" : Not found !!
I've been looking at various threads similar to my situation and tried several, to no avail.

It may be that the related services are down. Share the output of NMSROOT/bin/pdshow -brief from the server to share service status.
Many times, it happens when the port required by service is being used by other. Try the following procedure and see it works :
1.Stop daemon manager: net stop crmdmgtd
2.Go the location: CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\lib take a copy of the following
file and them delete them: ctmregistery and ctmregistery.backup
3.Restart the daemon manager: net start crmdmgtd (wait for 10 minutes)
Check if everything works fine.
-Thanks
Vinod

HP DESKJET INK ADVANT K209a-z, extraction fialed : error message "0 cannot open output file"

D/Sir,
I have extracted hp deskjet int advant k209a-z driver using 7zip.
I was getting the error "Extraction Failed: Cannot Open Output File".
On extract with 7-zip, I get the message:
0 can not open output file "<folders>/Autorun.inf"
I am on business laptop with Windows XP but tried with Admininstrator login as well.
Please help me. How to extract it sucessfully?

That type of error message may be indicative of a bad file. Did you download it on the web? If so, try again, but do not use a download manager or program to do it, those can occasionally cause problems with compressed files.
It could be possible, also, that some sort of security program on your laptop is blocking the extraction process. If that is the case you should be able to find some error in the Windows event viewer through the control panel.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Error in automatic processing of output of a delivery

Similar Messages

Maybe you are looking for