ERROR IN BPM Synchronous Sender-Urgent
Hi ALL,
I has the following Integration Process:
Receiver-----Synchronous Sender--
Sender(async)
When iam trying to Split the Message in Synchronous Sender
where the receiver for Synchronous send message is a HTTP adapter iam getting the following Error in SXMB_MONI
"Messages in multi message format can be sent to one adapter engine only ".
Is there any solution for this?Its urgent
Is there any solution that can split and send the messages individually to the HTTP so that i can Split the message inside a BPM and use the BPM to send each individual message seperately.
Please Help me in this Issue its Urgent
Thanks
YeswanthRaj
Hi YeswanthRaj,
you have to use the send step in a block with mode:
ParForEach or
ForEach.
You cannot send a multilieContainerElement!
See: http://help.sap.com/saphelp_nw04/helpdata/en/f6/e1283f2bbad036e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ce/bb2c421f3fda2ce10000000a1550b0/content.htm
You have also a sample in your integration repository; See SWC: SAP BASIS
BPM: MultipleFlightBookingCoordination
Regards Mario
Similar Messages
-
BPM synchronous send step - Fault message extraction
Hello Experts,
I am developing a BPM with Asynch RFC -> synch Webservice -> Asynch RFC scenario.
I have defined fault message in the synchronous interface used in the send step for web service, and also defined
exception branch where an alert is thrown.
In the alert, i want to send the fault text from the fault message. How can i do that??
ThanksHi Mona,
SOAP adapter doesnt support fault messages.
check stephan's reply @ How catch the SOAP Fault Message ?
> SOAP adapter does not support fault message.
> Any fault is treated as error.
> fault messages are only supported for XI messages (ABAP or Java proxies) and RFCs.
Fault message handling is not possible inside BPM. -
BPM Error: Synchronous Send Step
Hi All,
I am getting the below error in the synchronous send step of my BPM.
Interface urn:Haworthinc.com:India_Tax SIAA_IndiaTax_DBSelect_TICUSEXT has multiple operations
I am trying to send a query and get data from a table in this step. I have an abstract synchronous interface attached to this step and I have an inbound synchronous interface at the configuration side as the receiver for the BPM sync. interface.
The errored out interface is the abstract interface used as the response message at the BPM sync step.
Does anyone has encountered this before?
additional error info)(
Work item 000000364714: Object CL_SWF_XI_MSG_BROKER method SEND_SYNCHRON cannot be executed
Message no. WL821
Diagnosis
The calling of the object method for the work item ended with a return value for which no handling is modeled in the workflow.
System Response
The work item was forced into the error status.
Procedure
Refer to your workflow system administrator.
Procedure for System Administration
Also check the binding between the task container and the method container.
Appreciate your help!
Regards,
ShinyHi,
e urn:Haworthinc.com:India_Tax SIAA_IndiaTax_DBSelect_TICUSEXT has multiple operations
Are u using 7.1 versin of PI, if so can u check if u r consistently using operation name in interface
Babu -
Error when Splitting the Message in Synchronous Sender -BPM
Hi ALL,
I has the following Integration Process:
Receiver-----Synchronous Sender--
Sender(async)
When iam trying to Split the Message in Synchronous Sender
where the receiver for Synchronous send message is a HTTP adapter iam getting the following Error in SXMB_MONI
"Messages in multi message format can be sent to one adapter engine only ".
Is there any solution for this?Its urgent
Is there any solution that can split and send the messages individually to the HTTP so that i can Split the message inside a BPM and use the BPM to send each individual message seperately.
Please Help me in this Issue its Urgent
Thanks
YeswanthRajUse a transformation step to split the message then use a Block with par for each option and have the sync send in side it. Then send this asynchronously to the system you want to send it to.
VJ -
Fault message in synchronous send step in BPM
Hi,
When executing a synchronous send step in BPM it is possible to handle application errors (fault messages) with an exception branch. But how do you get hold of the actual data in the Fault message(faultText, faultURL, faultDetail etc) for further processing (mapping)?
Kind regards JohanJohan,
u have to define another container element in integration process.
For that container element an Async Abstract interface has to created with falult message as the message.
Do u have the fault message defined already...
Also go through this thread.
Fault message handling in BPM
-Naveen. -
Synchronous Send step showing errors in process designer
Hi All,
I have few questions in using a synchronous send step in
BPM.
Can I use a synchronous send step without opening Sync/async bridge.
When is the sync/async bridge opened?
Scenario:
File async --> XI (receive async) --> sync send step to J2ee application (HTTP post) --> async response send to File
Sync Abstract Interface:
Input:
Message type (same as outbound)
Response:
Message type (same as Http response)
When I use the synchronous step, I see errors in the process designer saying
Message to be sent and synchronous interface are not of the same type. This happens for both request and response message.
Please help me.
Regards,
MeherI think the Problem is with the INTERFACE Determination.
You need a BPM for the above scenario, but not a Sync/Asynch Brindge
In BPM
Step 1 : Receive from File 1
Step 2 : Do Transformation from File1 format to J2EE Request Format
Step 3 : Send a Synchronous send Step to J2EE
Step 4 : Transform the HTTP response to your File2 Format Response
Step 5 : Send the Response to File2
Interface Determination
File1 to j2ee Request
J2ee Request/Response To J2EE Request/Response
J2ee Response to file 2
Please check your Interface determination very closely. -
Synchronous Send in BPM restartable?
I have a XI scenario with BPM,
in the BPM, there is a Synchronous send (calling BAPI in another R/3 system - RFC receiver adapter),
the problem is:
in case of failure due to target system unavailale, my scenario fails (Sync send fails - while calling BAPI), is there any way by which i can resend this message or restart the scenario from this point,
pls help,Hi ,
We can resend the message from the particular point in BPM using Reconciliation concept in BPM once the application errors or system errors would be corrected.....
Check this one....
/people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm
Thanks,
Sekhar D -
Error in BPM (No receiver agreement found from sender to bpm)
Hi all
In a simple bpm scenario, I am getting a error that No receiver agreement found for sender service to bpm integration process.
What might be the reason?your configuration should like this.
say u are doing File to File using BPM
File to BPM
then BPM to File.
so u need to create RD where sender is fileservice and receiver is BPM.
second u hav to create another RD where BPM is sender and Fileserviceis receiver.
So there should be
one Sender Ag
two RD
two ID
one RA.
Thanks
Farooq. -
Hi all,
I have the same type scenario that is file initiates the bpm that invokes the Webservice.the file data goes into bpm as the input data of the webservice and webservice gives the response and then the web-service response is mapped to
idoc and finally posted to R/3.
The interface sI created:
1.outbound Async -
>for file
2. Abstract async----
>bpm reciever step.
3.Abstract sync----
>bpm sync send step.
4.inbound sync -
>for the webservice to recieve the reqst and to send the response to Abstract sync
5.Abstract async----
>to send the data out of BPM
6.inbound async----
for idoc
created 3 communication channel.
1.file adapter: sender
2.SOAP adapter: Recv
3.IDOC adapter: Recv
created 3 reciever determination
Business process instance in ID
reciever agreement(2)
interface determaination
But getting a problem in BPM.
I think the scenario is logically correct as I have seen previous
SDN suggestions.
But getting the problem in BPM's sync step.and the SOAP rec channel is also inactive.in BPM workflow I can see the recv step is getting file req data but after that in the sync send step
its stuck up.getting error.
Please sir suggest me.Remove the interface you created for Idoc that is inbound async one. use the imported Idoc itself as the interface and also as the message type. Everything else looks good though i did not really evaluate ur ID configuration..
VJ -
Were can i see synchronous send in the BPM editor
were can i see synchronous send in the BPM editor
i can see the send and receive ast the left top
but could nt find out synchronous sendHi,
When u select Send step, it is by default selected as Asynchronous. U may deselect it and select Synchronous there in the same step (Properties Window on right)
Regards,
Prateek -
ERROR"Unable to convert sender service to an ALE logical system,(Urgent)
Hi All when i am not giving the sender service address in the Receiver Aggrement i am getting this perticular error .
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Transaction IDX1: Port SAPRP1, client , RFC destination contain errors</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Transaction IDX1: Port SAPRP1, client , RFC destination contain errors</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
==========================================
And if i am giving this one then i am not getting any such error rather i am getting another error "Unable to convert sender service to an ALE logical system" for this also i have checked the LS system name in the Adapter specific Identifier and the logical name are exactly same. But still i am getting this error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert sender service to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
=============================================
Still i am getting this error can anyone please let me know what to do now..??
Please treat this as urgentHi,
This error is caused when Sender System name does not match the logical system name of partner. As you mentioned you have done all the steps to ensure that, here's a checklist that could be helpful:
1. Check adapter specific parameters for sender system.
2. Maintain header mapping in receiver agreement and ensure that sender service name provided is same as business partner name required in R3 and business partner type is LS.
3. This may sound very basic, but ensure that checkbox for 'Apply control record from payload' is not checked and if it is then the values passed through payload are appropriate.
Hope this would be helpful.
Thanks,
Bhavish -
URGENT - The underlying connection was closed: An unexpected error occurred on a send
Hello,
We have a web app that works with Ping Federate SSO. The code that was working fine suddenly stopped working with this error message.
Code: httpResponse = (HttpWebResponse)httpRequest.GetResponse()
Error: The underlying connection was closed: An unexpected error occurred on a send
We have tried everything to try to make it work. Made sure TLS is enabled, review the logs from both sides. Nothing seemed to work. I read on the net that there appears to be some known bug with the .net framework.
This is our prodcution code and our customers are currently impacted by this issue and we need to get the SSO working again.
I'd appreciate if you can email me how we can go about resolving this issue. BTW, I also made sure have the correct certificate through IIS bind.
regards,
Ilanko
[email protected]
206.931.9442Hello Ilanko,
It seems that you could access the application source code, if so, I suggest that you could check this
blog to debug the GetResponse() method to find the exact caused code line.
For this exception, here I find some related information which might be helpful:
You receive one or more error messages when you try to make an HTTP request in an application that is built on the .NET Framework 1.1 Service Pack 1
A blog which contains a summary for this exception and provides various workarounds:
http://blogs.msdn.com/b/engelsr/archive/2005/11/29/the-underlying-connection-was-closed.aspx
If your application is calling a web service, you could check this hotfix to see if your environment are met:
https://support.microsoft.com/kb/819450
If not, you could post a hotfix request with your environment description to:
https://support2.microsoft.com/contactus/emailcontact.aspx?scid=sw;%5BLN%5D;1422
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Sync/Async brdige error in BPM
Hi,
I am working on RFC-TO-Webservice scenario(Synchronous) and I am using the BPM in this scenario.
In BPM just I have used 2 steps.
Receive - Opened Sync/Async bridge
Send - Synchrouns step
Send - Cloase the Receive step
Send - Asynchrous send step (to send the response to the file...).
When I sent my RFC message from R/3 I am getting following error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PL_TIMEOUT</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Timeout condition of pipeline reached</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
I am using PI 7.0 SP13 is why I am not able to receive the Sync message in BPM...I have created the abstract interface based on RFC...getting the first message itself Timeout error.
I am trying to use Sync/Asnc bridge in BPM. First message itself PL_TIMEOUT error..bpm is not able to receive my rfc request...
I need help on this...do I need to do any settings in WEBAS level..I did Timeout setting in SXMB_ADM.
Regards,
Venu.hi,
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
check this blog..and same thing I did in my scenario
my scenario is RFC-TO-Webservice.
Sync/Async bridge can't we use like this ...Receiver step(open sync/async)-> Send(Synchronous)-Send(Close sync bridge)....that way can't we use ...
I am not able to receive the RFC request itself inside my BPM first step...getting the Timeout error.
But when I use the RECEIVE STEP with Asynchronous mode..I am able to receive the message inside my bpm.Incase of Synchronous I am not able to receive the message..
I am working PI 7.0 and SP13..did any body worked this version...
Thanks,
venu. -
Handling web service error in BPM
My scenario is get a message from a data base and call web service using that, if web service is available get the response from web service and send it back to data base, incase web service call is unavailable.
When web service is unavilable Iam getting a fault message back and could not proceed. I have a seperate blco to do web service call, in that I have Synchronous send step in BPM, and selected default system error under Exception.
My requirment is when SOAP fault occurs I need to send the data back to data base else proceed if web service call is sucessful.Looks like we can not handle fault messages in BPM.
Before I close this thread. just wanted to give little more explanation reg. my scenario.
Business scenario - Pull the data from Data base using a Stroed Procedure(this marks the records once it is successful) and call web service using this data. If web service call is success, push the response received from web service to Data Base. If call to web service fails, still push the data which was pulled initially from database back to same location in database.
Iam using BPM to get the message from Data Base using JDBC sender adapter, once I got the data Asynchronously into BPM Iam using Synchronous send step to call web service, in the properties section, I have specified request message (abstract asynchronous, ) response message (abstract asynchronous) , Receive from - SendContext and selected default option which is ExWebserviceCall for SystemError.
I have an exception branch for this synchronous send step, which is working good incase of system error.
This is working good when I tried to testing using invalid URL for target system. When web service itself is down , in this case Iam getting SOAP Fault back with HTTP code 500.
In SXMB_MONI, under error - it is showing as this error is related to application , which I think is application error.
When this happens my process is not working.
Edited by: Vamsi on Aug 26, 2010 4:31 PM -
Error in BPM: FIle to RFC
Hi friends,
I am working on File --> RFC ---> File Scenario using BPM ...
Here I am getting system error in BPM and showing broken red brick in workflow at sender1 ...
I have given like this...
Start --> Receiver ->sender1>Sender2 ---> Stop.
I have given properties... for each
C2 = Abstractinterface FIleResponse_Abs
Recevier
1)Step Name = Receiver
Message = C1 (I defiend in container Category =Abstact interface type = FileRequest_Abs)
Start process = (Selected)
Mode = Asynchronous
2)Sender1
Step name = Sender1
Mode =Synchronous
Synchronous Interface = FileRequest_AI
Request Message= C1
Response Message=C2
3)Sender2
Step Name =Send2
Mode = Asynchronous
Message = C2
After Configartion,I have placed the sender sample XML in Server ...it is picking up properly.But
it showing error while it was executing in the BPM. Please suggest me what i have to do.
If you didnt understand I ll give some more details.
Pls help me in this regard.
With Regards,
Raju.I am getting error in Integration Engine.....
Attribute Value
Engine Integration Engine
Status System Error
Repeatable No
Cancelable No
Start 20.06.2007 06:25:22
End 20.06.2007 06:25:22
Sender Party
Sender Service BPM_FILE_RFC_SAGAR
Sender Interface http://File2RFC_Syn
FileRequest_AI
Receiver Party
Receiver Service ECCIDOC800
Receiver Interface urn:sap-com:document:sap:rfc:functions
BAPI_SALESORDER_GETLIST
Quality of Service Best Effort
Error Category
Error Code
Message 9BA7365DDBC0FE49B9F512F7308DDA53
Reference
Maybe you are looking for
-
As a abap programmer what is the role in ale/idoc.
hi guru. i am a abap programmer. please tell me<b> what is the role of abap programmer in ale/ idoc.</b> regards. subhasis.
-
Dealer portal system SSL setting with multiple domain name
Hi gurus I have a Dealer portal system.(It is java java stack system just like EP) SSL certificate will expire in few days and I', planningl renew it soon.(in visual administrator key storage then send it to appropriate CA) Currently DP is used only
-
Hi, As per standard behaviour, dynamic actions are turned off during the execution of batch input sessions. can anyone one me is it possible to expicitly include dynamic actions in BDC session as in online mode? if yes , then how can we achieve it
-
Why can't I uninstall or reinstall quicktime and Itunes on my computer
Why can't I install or reinstall Quicktime and Itunes on my computer.
-
Just bought a Canon MG2420. I run Vista. Scanner error message
I keep getting an error message saying that the scanner is not plugged in or not connected, even though it is. It did the preliminary print just fine.