BPM synchronous send step - Fault message extraction

Hello Experts,
I am developing a BPM with Asynch RFC -> synch Webservice -> Asynch RFC scenario.
I have defined fault message in the synchronous interface used in the send step for web service, and also defined
exception branch where an alert is thrown.
In the alert, i want to send the fault text from the fault message. How can i do that??
Thanks

Hi Mona,
SOAP adapter doesnt support fault messages.
check stephan's reply @ How catch the SOAP Fault Message ?
> SOAP adapter does not support fault message.
> Any fault is treated as error.
> fault messages are only supported for XI messages (ABAP or Java proxies) and RFCs.
Fault message handling is not possible inside BPM.

Similar Messages

Fault message in synchronous send step in BPM

Hi,
When executing a synchronous send step in BPM it is possible to handle application errors (fault messages) with an exception branch. But how do you get hold of the actual data in the Fault message(faultText, faultURL, faultDetail etc) for further processing (mapping)?
Kind regards Johan

Johan,
u have to define another container element in integration process.
For that container element an Async Abstract interface has to created with falult message as the message.
Do u have the fault message defined already...
Also go through this thread.
Fault message handling in BPM
-Naveen.

BPM Error: Synchronous Send Step

Hi All,
I am getting the below error in the synchronous send step of my BPM.
Interface urn:Haworthinc.com:India_Tax SIAA_IndiaTax_DBSelect_TICUSEXT has multiple operations
I am trying to send a query and get data from a table in this step. I have an abstract synchronous interface attached to this step and I have an inbound synchronous interface at the configuration side as the receiver for the BPM sync. interface.
The errored out interface is the abstract interface used as the response message at the BPM sync step.
Does anyone has encountered this before?
additional error info)(
Work item 000000364714: Object CL_SWF_XI_MSG_BROKER method SEND_SYNCHRON cannot be executed
Message no. WL821
Diagnosis
The calling of the object method for the work item ended with a return value for which no handling is modeled in the workflow.
System Response
The work item was forced into the error status.
Procedure
Refer to your workflow system administrator.
Procedure for System Administration
Also check the binding between the task container and the method container.
Appreciate your help!
Regards,
Shiny

Hi,
e urn:Haworthinc.com:India_Tax SIAA_IndiaTax_DBSelect_TICUSEXT has multiple operations
Are u using 7.1 versin of PI, if so can u check if u r consistently using operation name in interface
Babu

Sending the fault message payload to sender using BPM.

I have the scenario where BPM splits a file into multiple record and each record calls webservice.
For a successfull call a success response is generated by web service . For a failed transaction a fault message is sent back which needs to be delivered to the sender's mail ID.
I am not able send the fault message payload which contains the error message details to sender ..
Please suggest what can be done for such a scenario. Is there any way by which error details can be sent to sender?
Edited by: trisha.b on Nov 28, 2010 7:23 PM
Edited by: trisha.b on Nov 28, 2010 7:29 PM

Hi,
Check the blog http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/22017.. [original link is broken] [original link is broken] [original link is broken]
You can handle the exception on your web service and model a Notification task so that you can send e-mail notification to the sender in case of exception
Regards, Anil

Synchronous Send step showing errors in process designer

Hi All,
I have few questions in using a synchronous send step in
BPM.
Can I use a synchronous send step without opening Sync/async bridge.
When is the sync/async bridge opened?
Scenario:
File async --> XI (receive async) --> sync send step to J2ee application (HTTP post) --> async response send to File
Sync Abstract Interface:
Input:
Message type (same as outbound)
Response:
Message type (same as Http response)
When I use the synchronous step, I see errors in the process designer saying
Message to be sent and synchronous interface are not of the same type. This happens for both request and response message.
Please help me.
Regards,
Meher

I think the Problem is with the INTERFACE Determination.
You need a BPM for the above scenario, but not a Sync/Asynch Brindge
In BPM
Step 1 : Receive from File 1
Step 2 : Do Transformation from File1 format to J2EE Request Format
Step 3 : Send a Synchronous send Step to J2EE
Step 4 : Transform the HTTP response to your File2 Format Response
Step 5 : Send the Response to File2
Interface Determination
File1 to j2ee Request
J2ee Request/Response To J2EE Request/Response
J2ee Response to file 2
Please check your Interface determination very closely.

ERROR IN BPM Synchronous Sender-Urgent

Hi ALL,
I has the following Integration Process:
Receiver-----Synchronous Sender--
Sender(async)
When iam trying to Split the Message in Synchronous Sender
where the receiver for Synchronous send message is a HTTP adapter iam getting the following Error in SXMB_MONI
"Messages in multi message format can be sent to one adapter engine only ".
Is there any solution for this?Its urgent
Is there any solution that can split and send the messages individually to the HTTP so that i can Split the message inside a BPM and use the BPM to send each individual message seperately.
Please Help me in this Issue its Urgent
Thanks
YeswanthRaj

Hi YeswanthRaj,
you have to use the send step in a block with mode:
ParForEach or
ForEach.
You cannot send a multilieContainerElement!
See: http://help.sap.com/saphelp_nw04/helpdata/en/f6/e1283f2bbad036e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ce/bb2c421f3fda2ce10000000a1550b0/content.htm
You have also a sample in your integration repository; See SWC: SAP BASIS
BPM: MultipleFlightBookingCoordination
Regards Mario

Synchronous send step from ccBPM

Hello Experts,
I'd like to ask you if you have an idea how to configure synchronous send step from ccBPM. So scenario is quite simple:
1. async start of process
2. sync send to system A
3. continue of process
What I already did is:
I define abstract sync interface everything including names is the same as target sync service interface. Then I define async abstract SI with a name of Request Message type and async abstract SI with a name of Response Message. I of course use Receiver From property set to Send Context...
In monitoring it looks like this: I successfully call sync interface, but the way back???... First of all process does not wait for response but continue with other steps and response doesn't not have service interface, namespace and receivers properties set(service, interface, namespace)...
Does anyone already face this problem or do you know how to send sync message from ccBPM in PI 7.1?
Many Thanks,
Milan

A BPM cannot process further without receiving the response message of the SYnc Send......
In the req and resp tabs of the Sync Step of BPM you have to use the correspoding Container Variables (which you have defined with the ABS Async Req and Resp MIs).
I am having few Sync steps defined in some BPMs on PI7.1 and all are waiting for the response and then only proceeding....if any error then BPM wont progress (rather should not).....below are the settings of my Sync Step:
Mode: Synchronous
Create New Transaction: Unchecked
Synchronous Interface: FileDetails_sync_AI
Request Message: Container variable for Req MI
Response Message: Container variable for Resp MI
Receiver From: Send Context
Regards,
Abhishek.

Synchronous SOAP: Get fault message on ABAP side

Hi,
I've a synchronous ABAP Proxy => PI 7.11 => SOAP scenario.
The SOAP receiver is a third party application using AXIS 1.4.
When I call the SOAP receiver with bad input via SOAP UI I receive an error message like that:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
   <soapenv:Body>
      <soapenv:Fault>
         <faultcode>soapenv:Server.userException</faultcode>
         <faultstring>com.ZZZ.exception.ZZZException: Employee not found: 9999911111</faultstring>
         <detail>
            <com.ZZZ.exception.ZZZException xsi:type="ns1:ZZZException" xmlns:ns1="http://exception.ZZZ.com"/>
            <ns2:hostname xmlns:ns2="http://xml.apache.org/axis/">server.YYY.com</ns2:hostname>
         </detail>
      </soapenv:Fault>
   </soapenv:Body>
</soapenv:Envelope>
When I call the SOAP receiver through my ABAP proxy, I just get this exception message in SXI_MONI:
<?xml version="1.0" encoding="UTF-8"?>
<com.ZZZ.exception.ZZZException xmlns:ns1="http://exception.ZZZ.com"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns1:ZZZException"/>
Nevertheless I see the error in SXI_MONI:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
    <SAP:Category>Application</SAP:Category>
    <SAP:Code area="SOAP">FAULT</SAP:Code>
    <SAP:P1>http://schemas.xmlsoap.org/soap/envelope/</SAP:P1>
    <SAP:P2>Server.userException</SAP:P2>
    <SAP:P3/>
    <SAP:P4/>
    <SAP:AdditionalText>com.ZZZ.exception.ZZZException: Employee not found: 9999911111</SAP:AdditionalText>
    <SAP:ApplicationFaultMessage namespace="">com.ZZZ.exception.ZZZException</SAP:ApplicationFaultMessage>
    <SAP:Stack/>
    <SAP:Retry>M</SAP:Retry>
</SAP:Error>
In the WSDL of the SOAP receiver there's just the ZZZException without fields faultcode or faultstring:
<complexType name="ZZZException">
<sequence/>
</complexType>
Do I have to add the fields faultcode or faultstring to the WSDL myself?
I tried the following, but it didn't work:
<complexType name="ZZZException" abstract="true">
    <xsd:sequence>
        <xsd:element name="faultstring" type="soapenc:string">
    </xsd:sequence>
</complexType>
Thanks in advance!

Hi Eddie -
Do I have to add the fields faultcode or faultstring to the WSDL by myself?
>>> No. Even though you add - it doesn't work as it's the webservice which returns the message.
For sending the fault messages, Have a look at the below blog -
Handling Web Service SOAP Fault Responses in SAP NetWeaver XI

ALSB 3 roll back a transaction without sending a fault message

Hi,
I have a proxy service exposed as a web service, which has some operations that call some tuxedo systems, do some transformation of the data, etc.
When any of it's operations is invoked I have to build an XML reply in both success AND error cases. The difference between both is a response code, if the call to the backend tuxedo system responded with a stream that starts with OK then everything is fine and I build the reply and send it back, but if an error ocurred it will send back an stream that starts with ER followed by an error code, with which I will have to build the SAME XML but using this error code and send it back to the client instead as a "successful" invocation instead of sending a SOAP fault message. Also I need to roll back the whole transaction in that error case. The system works like that and it can't be changed, we are building this proxy service based on a WSDL file given to us by the partner company that invokes our service and there's lots of other clients that do it in the same way. The problem is that I haven't found a way to roll back the transaction without making the proxy service send a fault message that the client system won't understand. The "Raise error" and "Reply with failure" do roll back the transaction but both send a fault message. Is there a way to answer "successfully" to the client but make an explicit rollback?

Hi,
Check the blog http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/22017.. [original link is broken] [original link is broken] [original link is broken]
You can handle the exception on your web service and model a Notification task so that you can send e-mail notification to the sender in case of exception
Regards, Anil

BPM Sync Send Step & Correlation

Hi Experts,
BPM Scenario: Step wise
1. Receive-1 from one sender
2. Send-1 it syncu2019ly to SAP using proxy and receive the response msg
3. N: 1 transformation b/w request message and response message to generate a target message
4. Send-2 the target message to a receiver
Though the scenario seems to be simple, I have a doubt about the sync send step.
How does the sync send step works in detail?
For every message the Receive-1 receives, a new process instance will be generated. When the message is sent to SAP syncu2019ly, how does it relate the response to the particular process instance?
For example, if 2 BPM process instances are created for two messages the Receive-1 step receives. However say, the second message is relatively less in size; in-turn consumes less time to execute in SAP and reaches XI well before the response for first message.
Which process instance will it be related to?
Please explain!
Karthik

Thanks, Udo! With your reply I heave that itching thought.
I would happy to read more about this sync-session logic.
Can you please provide more information/ blog/ material for detailed info?
P.S. pts added to you!
Thanks,
Karthik

Synchronous Send Step

Hi
Can someone tell me about sync send step in detail
because in my scenario I am using a sync. send step and the other end is oracle database which uses a SP(stored procedure) for updation.
problem is that I am able to see updation process successfully in the database i.e.the adapter says processing successful.
but after certain amount of time the send step in the sxmb_moni shows error
I think the problem is with the return flag that I am using as an acknowledgement
which is sent by the SP, any suggestions pls
Ranjit

Hi,
This might help you
Synchronous Sending followed by Transformation
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
http://help.sap.com/saphelp_nw04/helpdata/en/83/d2a84028c9e469e10000000a1550b0/content.htm
Re: Sync - Async Bridge
Regards
Agasthuri Doss

Sending back fault message from receiver to the sender

Hi,
Can somebody explain me, how to capture fault message generated by the receiver system back to the sender system?
I have a synchronous scenario, RFC -> XI -> Web Service.
When web service returns successful response, it gets mapped properly to an internal table of RFC. But, when web service returns fault message (as parameters passed to the web service are incorrect), RFC gives dump. Below message is shown in sxmb_moni.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PARSING">ADAPTER.SOAP_EXCEPTION</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>soap fault: com.ucas.hei.link.exception.WSException: Data access error: Incorrect userId/password. at com.ucas.hei.link.xml.ReferenceData.getRefInstUcas(ReferenceData.java:2338)</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Has anybody worked with this type of scenario? Please help me.
Thanks & Regards,
-Smita

Hi Smitha,
if you are calling a webserive from XI and the websevice call results in a soap exception, as of SP13 i am sure there is no way to capture this exception.
Work around approach would be to define exceptions for your sender RFC and hence when an exception is raised in XI, sender RFC will not dump instead you would have the defined exception caught.
CALL FUNCTION 'XYZ'
     EXPORTING
     IMPORTING
     EXCEPTIONS
       OTHERS          = 1.
cheers,
Naveen

How to add a Wait Step in BPM for the synchronous send step

Hi,
we have a scenario where in one of the step in BPM is a synchronous step which sends data to ECC system and gets the Respose .
The Requirement is that we need to add a wait for the Synchronous step in BPM as the data sent to RFC(ECC) need to get comitted before sendng the response which requires some wait time.
Currently we are getting the Response to PI from ECC where it was reported as the response is not correct.
Is this possible to add wait

> Is this possible to add wait
No, this does not make any sense.
The BPM waits for the response anyway.
You could change the scenario to an asynchonous pair of messages.
But in my opinion the error is inside the ECC, because the response from ECC is not correct.

BPM in CACHE won't activate. Fault message is not defined

Hello All,
After adding fault messages to our RFC scenarios, our BPM will no longer activate from transaction SXI_CACHE. The ReturnCode is 99. When we attempt to do a manual activation, we get an error which reads:
<b>Send step: Fault message '722783b5171311d9881bd5c4c0a8a777' is not defined</b>.
Have any of you seen this before?
We have mappings for the fault messages in interface mappings. Is there something else needed in the BPM itself?
Thanks,
Jimmy

From OSS:
The synchronous send steps define a fault message as exception. In this
case you have to wrap a block around every one or all send steps.
The block catches the exception, in your case the fault message.
The problem is, if no handler is defined, the import of the process fails (SXI_CACHE).
So modify the process, wrap a block with exception
handling around the send step and activate once more.

Fault message not defined

Hello!
I have a problem to activate a business process in XI 3.0. In the Integration Repository I can activate it and there are no errors.
However, if I go to SXI_CACHE the return code is 99 and it cannot be activated. I have executed a complete cache refresh but there is always the following error:
Send step: Fault message '87794cf65e3d11d9b4f6d1dd0fc5e9ea' is not defined
In the business process a client sends a request using the HTTP adapter. Then the process engine sends several requests in parallel to different SAP systems using the RFC adapter. The responses are collected and sent back to the client using the sync-async bridge.
In the Integration Repository I have specified fault messages types for all synchronous message interfaces of my namespace. I have either referenced an imported RFC fault messages type or an external definition.
How can I solve the error so that a functional runtime version is created? Thanks for your help.
Regards, Tanja

Hi!
> you have to look in the properties of your steps
> (probably send) for not referenced exceptions. Define
> a exception branch and reference it.
I have defined an exception branch for the send step which references an exception:
http://www.obloid.de/temp/BPM1.jpg
http://www.obloid.de/temp/BPM2.jpg
The RFC exception is defined as fault message type:
http://www.obloid.de/temp/BPM3.jpg
Regards, Tanja

BPM synchronous send step - Fault message extraction

Similar Messages

Maybe you are looking for