Error in burning iTunes library to DVD as back up

I'm keen to make a back up of my iTunes library onto DVD.
When I try to do this, having followed the instructions to the letter, the system chugs through, checks the playlist, tells me it is initiating the burning, then I get a message canceling the operation reading 'unknown error 4251'.
Now, I can't find anything relating to this error on the Apple website, however, there are other users with the same problem using other forums. The problem is though, there don't seem to be any answers resolving the problem.
Any help would be great, thanks.
Evesham Windows XP
Evesham   Windows XP Pro  

Well....You do not absolutely need to Use iTunes for Backing up your Music. Any program that burns DVDs can burn music files as data disks.
iTunes can work fine for music files BUT: I prefer more control and completeness over my backup process. It is also very important to note that a large limitation of using iTunes to manage the backup is that the iTunes method does not maintain the two meta-data files (iTunes Library.itl & iTunes Music Library.xml) where your Playlists, Ratings, Play Counts, etc. are stored. See: What are the iTunes Library files?
If you are heavily invested in your Library data (Playlists, Play Counts, Ratings, Last Played, Date Added, etc.), it is critical that you also make and archive multiple backups of your ‘iTunes Library.itl’ file.
If your music is located under one common Folder (e.g.-‘iTunes’), then it is easiest to physically copy that folder and all its sub-folders in one simple process. It can be done quickly, and incrementally – several times a day, when necessary. In the case of any data loss, just re-copy your entire (or partial) music library back to wherever it was, placing it in the main Folder that the previous iTunes expected. Along with the .ITL meta-data file, this completes a full ‘restore’ of your music to the time of your last backup.
Use of a backup software program will greatly help. It will allow you to easily perform incremental backups of only the files that have changed. WinXP has such a facility built-in. I use a free program called FileSync ( http://www.fileware.com ). There are many out there. Some use Zipped files or proprietary formats, others use standard file formats. I like FileSync as it uses normal file formats that can be viewed/managed via any Windows program or utility.
Here's a list of possible ways to copy your music files from your main iTunes computer to another storage medium for backup purposes.
1) Use an External Hard Drive to store the complete iTunes meta-data files and underlying Music Folder structure and songs from your main computer. They are quite cheap now, for their storage volume. This is my preferred main medium.
2) If you have two computers:
2a) Connect them through a router
2b) Connect them using a Direct (w/Mac) or Crossover (PC/PC) Ethernet cable (See: http://www.ifelix.co.uk/tech/3001.html)
2c) Connect them via a USB-to-USB Network Bridge. See: here as an example.
Copy the files and folders from one computer to the other. Use the second PC as your backup repository.
3) Burn several DVDs (at 4.7+ GBs each) with the music data files and store them safely. Re-writable ones are good for backup purposes (if your DVD drive can manage these).
4) Burn 6x more on CDs (at 700MB each) than in #3 above and store them safely in more space Re-writable ones are good for backup purposes (if your CD drive can manage these).
5) Use a larger USB Flash drive (1GB – 4+GBs) to store the files only if you have a small amount ripped music or have multiple and/or jumbo USB drives at your disposal that will fit your music library.
6) Use the second internal hard drive (if available) of your PC -- not optimum, as you really want to physically separate the storage of backups from the originals, but good as a tertiary storage device.
By keeping only one copy of your music (other than on the iPod), you are not truly 'backed-up' and are running a high risk of losing your music. Music files on just the iPod and the computer is not considered having any backup. If you cannot store your complete music files on the computer, then create and maintain two external sets.
You need at least three sets of your music:
-- One full set on the PC within iTunes (on internal HD or ExHD)
-- One full set on an separate external backup medium (CD/DVD/ExHD/other)
-- One (full or partial) set on the iPod
It is a good policy to backup all your important data. It is a very smart policy to back it up on more than one medium.
External hard drives now run less than $100 for 200-250GBs of storage. Very cheap backup insurance, indeed. See This Link

Similar Messages

  • Can I burn my iTunes library to DVD or back it up some other way?

    Hi, I'm about to do a system upgrade, so I wanted to burn my I-tunes library to DVD for back-up.  I have over 600 songs, so using CDs would not be practical.  I also don't have an external storage device and all my other backed up stuff on DVD, so the I-tunes library would be the last thing I'd still need to back up.
    If using a DVD isn't possible, is there a way to upload the songs into I-cloud perhaps?  I have an Ipad with I-cloud, but my old computer doesn't have it (2008 Imac, Leopard, using Itunes version 10.6).  It's about 3.6 GB worth of songs and one 50 min TV-show.

    How to back up your media in iTunes - Support - Apple
    The Complete Guide to Backing Up your iTunes Library | iLounge ...

  • How do I burn iTunes library onto DVD-RW? I'm a schmuck.

    Tab: Advanced/Burn only says data - CD; Why can't I burn it as a Audio DVD. I checked help. I got Itunes 6, Sonic ain't working. Neither is Windows Media player. I don't get it. I created playlist, went back to main library, selected all, then back to playlist, and pasted, then burn; I don't know, I'm a schmuck. Nothing can work for me. Like I'm a 3 year old, step 1, 2, 3, how do I do this please? Ask me whatever ya want regarding this, to ensure this can even be done, but please, someone kindly help me? I'm using a (period) > "Staples" DVD-RW, says up to 4x, what am I doing wrong or am I that much of a *******? My email is [email protected] Thank you in advance. My iTunes library is: (367) songs, and 1.53GB. Take care.

    Currently, you can not burn purchased videos to a "Playable" DVD. You CAN burn them to a Data DVD for backup, but there not playable.
    If you look at the "Terms of service" agreement, it states in section 9 under Usage rules.....
    "You shall be entitled to export, burn (if applicable) or copy Products solely for personal, noncommercial use. You shall not be entitled to burn Video Products."
    http://www.apple.com/legal/itunes/us/service.html
    I know, this does suck, I myself wish I could burn the videos I buy to a DVD to play on the TV. Its just currently Hollywood wants there content very well protected, and currently theres no way to burn it to a DVD and have its protection carry over onto the burned DVD.

  • Backing up itunes library to DVD -- process interrupted

    I'm backing up my entire itunes library on dvd-rw and the burner will stop in the middle. then itunes will say: please insert another disc while the burning is taking place. The problem is, the burner won't stop burning. So, I stop the burner and am unable to pick up where I left off in the backing up process. I have over 50 g of music that i'm trying to backup before i take my lappie to the geek squad (long story). does anybody have any ideas how to specifically backup a particular section of my library?

    SOMETIMES IT HAPPENS, BUT LET ME ASK U R U BACKING IT UP IN DATA FORM, I SUGGEST U CHOOSE DATA BURNING WHEN U BACKING UP ITUNES, IT SAVES U DISK AND IT IS BETTER.
    1. OPEN ITUNES
    2.UNDER EDIT CLICK ON PREFERENCES.
    3.LOOK FOR ADVANCE
    4.CLICK ON BURNING
    5 AN LOOK FOR AUDIO FORMAT
    6.CLICK ON DATA CD /DVD.
    THIS SHOULD BURN IN DATA FORMAT. MAKE SURE ALSO U CHOOSE THE HIGHEST SPEED OF BURNING.
    AND OPEN ITUNES BEFORE U INSERT UR DISK FOR BURNING. MAKE SURE THE DISK IS FREE AND NEW.
    IF U ENCOUNTER PROBLEM RESTART ITUNES AND REBOOT UR COMPUTER. THIS SHOULD BURN UR DISK WITHOUT PROBLEM.IF U DO ,I SUGGEST U GO GET USB DRIVE AND SAVE UR ITUNES IN IT. THEN U DONT HAVE TO BURN THEM.
    ALSO IF U ENCOUNTER LOTS OF PROBLEM, JUST DEAUTHORISE UR COMPUTER BEFORE U TAKE IT FOR REPAIRS. U SHOULD NOT LOOSE UR MEDIA, BUT IT CAN HEPPEN. THEY SHOULD REPAIR UR COMPUTER WITHOUT U LOSING ANYTHING. IF IN CASE U LOOSE EVERYTHING U CAN USE UR IPOD TO REINSTALL OR REIMPORT UR SONGS FROM IPOD TO ITUNES. SO MAKE SURE ALL UR SONGS ARE IN UR IPOD BEFORE REPAIRS.WHEN U GET UR COMPUTER BACK REAUTHOURISE UR COMPUTER AGAIN, DO UPDATE AT APPLE.COM THEN U USE UR IPOD TO REIMPORT UR SONGS. U CAN DO THIS VIA A THIRD PARTY SOFTWARE. U CAN USE IPOD2COMPUTER.COM. THERE ARE MANY OF THEM THOUGH. JUST GO ONLINE AND TYPE IPOD TRANSFER SOFTWARES. U WILL SEE MANY OF THEM. U SHOULD NOT HAVE PROBLEM U JUST PAY THEM ABOUT 22 DOLLARS AND ALL UR MUSIC WILL BE TRANSFERED BACK TO ITUNES WITH NO PROBLEM, SO U KNOW WAT SLEEP EASY.

  • When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder". How can i fix this?

    When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder. How can i fix this problem?

    Anyone can help to advice how to solve this issue ?

  • I have the following error The file "iTunes library.itl" cannot be read because it was created by a newer version of iTunes

    Can anyone help me with this problem.  I tried updating the latest itunes and it caused an error MSVCR80.dll missing.  I then tried fixing it after reading other people had the same problem and a solution was given about uninstaling itunes and the order in which to do that.  I did that but now get the error "the  files "itunes library.itl" cannot be read because it was created with a newer version of itunes.  I see a solution has been given about this but I cannot find what is suggested to enable me to follow instructions.  Can anyone please go through step by step (letting  me know where I can find what is needed) to enable me to be able tio log into itues again.  Thanks

    Hi pussygalore,
    If you are having issues with iTunes after an attempted update, you may find the following article helpful:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    You may want to make sure that in the last step (reinstalling iTunes) that you are installing the latest/newest available version, and not attempting a reinstall from an older file.
    Regards,
    - Brenden

  • I can't open my Itunes keep receiving error message- The iTunes Library.itl file cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder

    I can't open my Itunes keep receiving error message- The iTunes Library.itl file  cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder. I have even tried removing and reinstalling iTunes and it still does work because I continue to receive this error message. Please Help!

    Anyone can help to advice how to solve this issue ?

  • I started backing up my iTunes library on DVDs

    I started to back up my iTunes library on DVDs some time ago but ran out of DVDs.  I now have a new supply in but I can't access the back up option under file/library - it doesn't appear at all.  All I get access to is organise library, export library, export list.  Could this be because I stopped half-way through?  Can anybody tell me how to continue with my back up please?  Thanks a lot.

    No it's because they made a change in the way you back up your Library. I haven't been able to get an answer as to how we are suppose to do it in the 10.4 version. If anyone knows how please share the information as it is really getting frustrating.

  • Backup of iTunes Library to DVD causes iTunes to crash

    I thought backing up my entire iTunes library onto DVD would be simple. iTunes reveals that it will take 3 disks for my library and proceeds to write Disk#1. After requesting (and inserting) a second blank disk, iTunes crashes -- EVERY TIME. Now what? Is this a common problem? Is there a workaround?
    I am using iTunes 9.0.1. All my software is up to date.

    I'm having the same problem -- Latest iTunes, and I've 'coastered' about 6-8 total DVD+R's trying different options, and I'm on Windows(!).
    Otherwise, the behavior is exactly as you describe!
    I'm running Vista-64 and the latest iTunes. My Library is about 48GB (12 discs required...). What makes this doubly strange is that once iTunes crashes, I simply cannot eject the disc it was on when it iTunes crashed (usually it's the second or third DVD disc...), and hence the CD/DVD drive us 'locked up'. I must reboot my machine and 'catch it' (hitting the eject button) before the machine gets to the BIOS (while it's still in the POST sequence).
    Any help would be appreciated!

  • Problem accessing iTunes. Getting error message "The iTunes Library Extras.itdb file is on a locked disk"?

    Problem accessing iTunes. Getting error message "The iTunes Library Extras.itdb file is on a locked disk"

    Close iTunes, delete iTunes Library Extras.itdb from your iTunes folder, start iTunes. iTunes should rebuild the file automatically.
    tt2

  • I just installed ITunes 11.0.4. I get the error message: "The Itunes Library cannot be saved. A folder was specified instead of a file." When I sign on next, it says the library can't be found. Running Windows Vista with Mcafe protection

    I just installed ITunes 11.0.4. I get the error message: "The Itunes Library cannot be saved. A folder was specified instead of a file." When I sign on next, it says the library can't be found, and Itunes wont open. I'm running Windows Vista with Mcafe protection

    Hi there Br0x,
    You may want to try rebuilding the iTunes library as an initial troubleshooting step. Take a look at the article below for more information.
    iTunes: How to re-create your iTunes library and playlists
    http://support.apple.com/kb/ht1451
    -Griff W.

  • Cant open itunes due to error "the file itunes library.itl cannot be read becaues it was created by a newer version of itunes."

    Can't open itunes due to error "the file itunes library.itl cannot be read because it was created by a newer version of itunes."

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • TS1717 When trying to open itunes I get an error message "New iTunes Library".  any suggestions?

    i can't open itunes.  i get an error message: New iTunes Library.  Anyone else encounter this?

    I have Windows 7.  I went into control panel and selected 'programs' and then 'programs and features'.  Then I highlighted the iTunes program in the list and then selected 'repair'.  It then configured iTunes.  I then restarted my computer and it was okay.

  • Problems with burning iPhoto library to DVD

    When I try to burn my iPhoto library to a DVD, iPhoto eventually always crashes.
    iPhoto will prepare to burn and the window to select output drive, spee, etc. will com up. After clicking on "burn", iPhoto is always end.
    What could be wrong?
    Is my iPhoto library maybe corrupted?
    If yes, can I do something about it?
    Infos:
    iBook G4, 640 RAM, HD 30GB (3.72 available), OSX Tiger, external LACIE d2 DUAL DVD+-RW DRIVE, iPhoto library: 3.53 GB
    Thanks for any help!

    Hi iRose,
    Thanks for giving all your info. Your free space on your hard drive is not enough to do a successful burn of the entire iPhoto Library. Do you have an external drive? Is your drive supported for iPhoto burning? usually on the internal that comes with the computer is supported.
    Try instead to burn the entire iPhoto Library folder in the Finder using your external burner.
    Close iPhoto
    I can't burn a Cd or DVD
    The next info is from iPhoto FAQ on the Apple site
    Question 5: Can I burn a CD or DVD to back up my iPhoto library?
    Answer: Yes, you can easily back up your iPhoto library by using the CD burning capabilities of Mac OS X. Simply insert a blank CD into your internal or external CD-RW drive and copy the iPhoto library to the CD icon on your desktop. When you drag the CD icon to the Trash/Eject button in the Dock, you are given the option to burn the CD. Click Burn and the CD is created. To burn a DVD backup of your digital images, use iDVD and a SuperDrive-equipped Mac.
    Lori

  • TS1424 when i try to get on my itunes account i get the error message "New itunes library" and i am unable to open my account.

    I have had an itunes account for over a year and have always used the same computer.  Recently I have been unable to open my itunes account.  Every time i try to open it, the error message "New itunes Library" comes up and I can do nothing further.  Does anyone have any ideas what I can do to resolve this issue.

    Hello,
    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    *Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    *In the Firefox options window click the ''Advanced'' tab, then select "General".
    *In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    *Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    * [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    * [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Did this fix your problems? Please report back to us!
    Thank you.

Maybe you are looking for

  • Camera No Longer Recognized by MacBook

    Man, so I followed community advice from léonie on my computer (MacBook Pro_Early 2011_OS X Yosemite 10.10) to remove "RawCamera.bundle" and "RawCameraSupport.bundle" from the /System/Library/Coreservices Folder because my Canon Rebel T4i just shows

  • Sap customizing request  pop-up not getting generated

      Hello Experts,      I am facing a problem while generating customizing transport request, the transport request creation pop-up is not coming, Checked in scc4 - customizing chenges allowed + automatic recording is set and client role is customizing

  • Sidecar AIR Runtime install with  Native .exe installer using ADT

    I have packaged my AIR app into a Native .exe installer using ADT. If the user does not have air installed and they are connected to the internet, the AIR runtime is automatically installed. Is it possible to package the AIR runtime into the exe so t

  • Flash CS4 Trial Version Crash

    I've been using Flash CS3 pro. It crashes when importing images to library. Ran all updates -still crahses So I downloaded Flash CS4 trial ran all the updates. It ran fine for a few hours... then crashed. Now Trial version also crashes also when impo

  • WebService response charset problems

    Some time ago I posted a problem regarding unicode characters in WebService responses from WL7.0. I received a patch that helped partially - after the patch was applied, WL no longer threw any exception when an utf character was included in the respo