Error in Code Generation

Hi All,
I am getting following error in my interfance;
Message:
ODI-1228: Task FEED_NL_STEP_UPDATE_DATA_TO_XML_WS (Integration) fails on the target XML connection XML_DS_NL_LISTOFACTIVITY.
Caused By: java.sql.SQLException: ORA-00942: table or view does not exist
Code:
TRUNCATE SCHEMA LOA
Is there any command TRUNCATE SCHEMA.. in oracle?
If not, then why does this command is generated in the code?
OR
Is there any issue in setting properties in the mappings/flow of the interface?
Can someone through some light?
Thanks and Regards
Santosh

HI Santosh
Please provide your KMs and transfermation requirement (like XML to oracle table or oracle table to oracle table etc)
Regards,
Phanikanth

Similar Messages

  • Error in code generation for deleting table BUT000_TD

    Hi,
    Did anyone encounter this error while working on EEWB ?
    I created the project extension via EEWB and completed the wizard setting with the package (dev. class) value as $temp as I wanted to test it locally.
    One of the errors, that I got is:
    Error in code generation for deleting table BUT000_TD
        Message no. DA464
    Diagnosis
        This error message indicates that internal inconsistencies exist.
    Procedure
        Please consult SAP.

    Hi,
    As I mentioned in my previous post kindly check the consistency of the structure BUT000_TD.
    Regards,
    Sudheer.

  • Error on code generation

    I've got a problem when compiling a class , javac tells me that it failed to generate code. Here is the whole error message, someone knows what I can do ?
    -1 / -14:      N/A     astore_2
    0:      1       new
    1:      2       dup
    2:      3       ldc
    3:      0       invokespecial
    4:      N/A     astore_2
    5:      N/A     aload_0
    6:      N/A     aload_0
    7:      N/A     getfield
    8:      N/A     aload_2
    9:      N/A     invokevirtual
    10:     N/A     iconst_0
    11:     N/A     aaload
    12:     N/A     invokevirtual
    13:     N/A     putfield
    14:     N/A     return
    GenCode failure in source class: GraphicalMenu$1
    at.dms.classfile.ClassFileFormatException: stack underflow
       at at.dms.classfile.InstructionHandle.checkInstruction (InstructionHandle.java:122)
       at at.dms.classfile.CodeEnv.checkExecutionPath (CodeEnv.java:95)
       at at.dms.classfile.CodeEnv.checkExecutionPaths (CodeEnv.java:73)
       at at.dms.classfile.CodeEnv.check (CodeEnv.java:47)
       at at.dms.kjc.CSourceMethod.genCode (CSourceMethod.java:337)
       at at.dms.kjc.CSourceMethod.genMethodInfo (CSourceMethod.java:191)
       at at.dms.kjc.CSourceClass.genMethods (CSourceClass.java:510)
       at at.dms.kjc.CSourceClass.genCode (CSourceClass.java:421)
       at at.dms.kjc.Main.genCode (Main.java:268)
       at at.dms.kjc.Main.run (Main.java:214)
       at at.dms.kjc.Main.compile (Main.java:69)
       at at.dms.kjc.Main.main (Main.java:60)
    error:stack underflow

    I've got a problem when compiling a class , javac tells me that it failed to generate code. Here is the whole error message, someone knows what I can do ?
    -1 / -14:      N/A     astore_2
    0:      1       new
    1:      2       dup
    2:      3       ldc
    3:      0       invokespecial
    4:      N/A     astore_2
    5:      N/A     aload_0
    6:      N/A     aload_0
    7:      N/A     getfield
    8:      N/A     aload_2
    9:      N/A     invokevirtual
    10:     N/A     iconst_0
    11:     N/A     aaload
    12:     N/A     invokevirtual
    13:     N/A     putfield
    14:     N/A     return
    GenCode failure in source class: GraphicalMenu$1
    at.dms.classfile.ClassFileFormatException: stack underflow
       at at.dms.classfile.InstructionHandle.checkInstruction (InstructionHandle.java:122)
       at at.dms.classfile.CodeEnv.checkExecutionPath (CodeEnv.java:95)
       at at.dms.classfile.CodeEnv.checkExecutionPaths (CodeEnv.java:73)
       at at.dms.classfile.CodeEnv.check (CodeEnv.java:47)
       at at.dms.kjc.CSourceMethod.genCode (CSourceMethod.java:337)
       at at.dms.kjc.CSourceMethod.genMethodInfo (CSourceMethod.java:191)
       at at.dms.kjc.CSourceClass.genMethods (CSourceClass.java:510)
       at at.dms.kjc.CSourceClass.genCode (CSourceClass.java:421)
       at at.dms.kjc.Main.genCode (Main.java:268)
       at at.dms.kjc.Main.run (Main.java:214)
       at at.dms.kjc.Main.compile (Main.java:69)
       at at.dms.kjc.Main.main (Main.java:60)
    error:stack underflow

  • Error during distribution for compiled code generation-Reply

    Hi,
    Looking at your error messages, it looks as though your build is failing during the code generation phase of an autocompilation. To determine why the code generator crashed, either look in the $FORTE_ROOT/log/forte_ex*.log files or don't use autocompilation and use fcompile.
    There are many reasons why the code generator could crash. Some of the things I've come across are running out of memory and trying to find invalid classes.
    If its the invalid class problem you'll find a message like:
    Generating code for partition BLTCustomWindow_cl0_Part1.
    ERROR: Exiting due to following exception:
    SYSTEM ERROR: Client partition FTCompile_cl0_Client was terminated by escaped
    exception. See the remainder of the error stack for more information.
    Class: qqsp_ResourceException
    Error #: [1001, 3]
    Detected at: qqrt_ForteExecAgent::LoadPartition at 1
    Error Time: Tue Aug 18 17:52:44
    Exception occurred (locally) on partition "Forte_Executor", (partitionId =
    9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
    [9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
    "FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
    FATAL ERROR: Invalid class ProductBMServices.ProductSecurityMgrProxy
    (0x4ecd,0x19a)
    Class: qqsp_ImplementationException
    Detected at: qqcg_TRclass::SetClass at 2
    Last TOOL statement: method ForteCompiler.ProcessPGF
    Error Time: Tue Aug 18 17:52:44
    Exception occurred (locally) on partition "Forte_Executor",
    (partitionId = 9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
    [9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
    "FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
    The solution for this instance is to clean up the invalid classes using the c4tstdrv utility.
    c4tstdrv > setrepos star8
    c4tstdrv > setwork dmcompiledbuild
    c4tstdrv > open
    Type Service Flags Level
    err sh * 255
    trc rp 1 4
    c4tstdrv > findproj productbmservices
    c4tstdrv > cleanuprtclasses
    Removing extraneous RTclass ProductShootingLocationMgrProxy
    Removing extraneous RTclass PRTerritoryBaseMgrProxy
    Removing extraneous RTclass PRTerritoryMgrProxy
    Removing extraneous RTclass TalentBaseMgrProxy
    Removing extraneous RTclass TalentTypeMgrProxy
    Removing extraneous RTclass TitleTypeBaseMgrProxy
    Removing extraneous RTclass TitleTypeMgrProxy
    Removing extraneous RTclass ProductSecurityBaseClass
    Removing extraneous RTclass ProductSecurityBaseQuery
    Removing extraneous RTclass ProductSecurityQuery
    Removing extraneous RTclass ProductSecurityMgrProxy
    c4tstdrv > commit
    c4tstdrv > exit
    Integrate the changes to the workspace, start the build again and this should have cured the problem.
    However, its hard to know what the cause of your problem is without seeing the output in the log files.
    Good luck.
    Mark Carruthers
    20th Century Fox
    "Forte Consultants" <[email protected]> 01/22/99 08:35am >>>
    Hi,
    I'm doing application distribution for my application using a fscript
    script and am forcing compilation on 2 of my partitions.
    This I have been doing from quite sometime successfully. Recently I
    developed a new service and plugged it into my application for
    deployment.
    I'm successfully able to distribute & deploy the interpreted code. But
    I'm getting a long list of system errors when I try doing distribution
    for compiled code. And I see only one of the .exe generated instead of
    two because of which I'm unable to go ahead with installaion. I would
    appreciate if anybody let me know why this's happening ?. The following
    is the main chunk of this error list.
    Thanks in advance.
    --Anand Ramaswamy
    SYSTEM ERROR: Cannot resolve the distributed reference for an object of
    class
    (qqlo_Object) named (<Unknown>) for the reasons below.
    Class: qqsp_DistAccessException
    Error #: [601, 144]
    Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
    Error Time: Fri Jan 22 10:44:22
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
    taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
    "fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
    SYSTEM ERROR: Can not initially communicate with the object named
    (Unnamed),
    which is supposed to be in partition
    (32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
    Class: qqsp_DistAccessException
    Error #: [601, 140]
    Detected at: qqdo_ProxyMgr::CheckAccess at 1
    Error Time: Fri Jan 22 10:44:22
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
    taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
    "fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
    SYSTEM ERROR: Attempt to send to unknown destination partition
    (32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
    Class: qqsp_DistAccessException
    Error #: [601, 102]
    Detected at: qqdo_PartitionMgr::SendMsg at 1
    Error Time: Fri Jan 22 10:44:22
    Distributed method called: qqdo_InternalMessage.<Message> (object
    name
    Unnamed) from partition "CodeGenerationSvc_cl0_Part1-router",
    (partitionId
    = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.2]) in application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
    taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
    "fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
    SYSTEM ERROR: Partition (32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1)
    no
    longer exists. The process associated with the partition probably
    terminated.
    Class: qqsp_DistAccessException
    Detected at: qqdo_PartitionMgr::CheckStarted at 1
    Error Time: Fri Jan 22 10:44:22
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
    taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
    "fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
    SYSTEM ERROR: This method invocation is being retried because the
    failures
    shown below and the fact that the dialog duration is MESSAGE. This is
    try #2.
    Class: qqsp_DistAccessException
    Error #: [601, 54]
    Detected at: qqdo_Message::Failed at 1
    Error Time: Fri Jan 22 10:44:19
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
    taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
    "fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
    SYSTEM ERROR: The load balanced router is disabled or has no members.
    This
    can happen if all of the members terminated or failed.
    Class: qqsp_DistAccessException
    Error #: [601, 161]
    Detected at: qqdo_LbRouter::Route at 1
    Error Time: Fri Jan 22 10:44:19
    Distributed method called: GenerationMgrProxy.GeneratePartitionCode
    (object name
    site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
    from partition "Fscript_cl9_Client", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.2]) in application
    "fscript",
    pid 4b81 on node MOOSUP in environment IGTSDENV
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    SYSTEM ERROR: This method invocation is being retried because the
    failures
    shown below and the fact that the dialog duration is MESSAGE. This is
    try #1.
    Class: qqsp_DistAccessException
    Error #: [601, 54]
    Detected at: qqdo_Message::Failed at 1
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
    taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
    "fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
    SYSTEM ERROR: Access to a load balanced router member (which is a
    service
    object) failed for the reasons below.
    Class: qqsp_DistAccessException
    Error #: [601, 162]
    Detected at: qqdo_LbRouter::Route at 2
    Error Time: Fri Jan 22 10:44:15
    Distributed method called: GenerationMgrProxy.GeneratePartitionCode
    (object name
    site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
    from partition "Fscript_cl9_Client", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.3]) in application
    "fscript",
    pid 4b81 on node MOOSUP in environment IGTSDENV
    Distributed method called: qqlo_Object.<Message> (object name
    Unnamed)
    from partition "Forte_Executor", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    SYSTEM ERROR: Cannot resolve the distributed reference for an object of
    class
    (qqlo_Object) named (<Unknown>) for the reasons below.
    Class: qqsp_DistAccessException
    Error #: [601, 144]
    Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
    Error Time: Fri Jan 22 10:44:15
    Distributed method called: qqlo_Object.<Message> (object name
    Unnamed)
    from partition "Forte_Executor", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    SYSTEM ERROR: This distributed reference was previously invalidated due
    to the
    reasons below.
    Class: qqsp_DistAccessException
    Error #: [601, 132]
    Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 3
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    INFORMATION: The connection to the partner was terminated by the
    Communication
    Manager for the reasons below.
    Class: qqsp_DistAccessException
    Detected at: qqdo_PartitionMgr::StopLocation at 1
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    INFORMATION: Asynchronous Failure: Recieved a close from the network
    partner:
    Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
    193.1.11.26 %LINKDISCON, network partner disconnected logical link
    Event 4
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    SYSTEM ERROR: This method invocation is being retried because the
    failures
    shown below and the fact that the dialog duration is MESSAGE. This is
    try #1.
    Class: qqsp_DistAccessException
    Error #: [601, 54]
    Detected at: qqdo_Message::Failed at 1
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    INFORMATION: The connection to the partner was terminated by the
    Communication
    Manager for the reasons below.
    Class: qqsp_DistAccessException
    Detected at: qqdo_PartitionMgr::StopLocation at 1
    Error Time: Fri Jan 22 10:44:15
    Distributed method called: qqlo_Object.<Message> (object name
    Unnamed)
    from partition "Forte_Executor", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    INFORMATION: Asynchronous Failure: Recieved a close from the network
    partner:
    Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
    193.1.11.26 %LINKDISCON, network partner disconnected logical link
    Event 4
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Hi,
    If this INCLUDE is in a function group go the MAIN program and activate from there.
    Can you list out the include name?
    a®

  • FPGA Code Generation fails with error codes 7 and -1

    Hi all,
    I have been having a weird issue with my LV FPGA compilation in the last couple of days, no matter what I try to compile LV fails to generate the FPGA code files and returns with errors 7 and -1 and complains that the file is not found. This happens no matter what I am trying to compile even a VI with just a while loop. I followed the discussion forum here without any luck, also followed the NI article here and that did not help either. The error codes always get generated at the start of the Generating Intermediate files step #7 (out of 7).
    Attached to this post is a screenshot of the error I am getting (error -1 just says internal error and to contact NI support), bellow is basically the error I get for error code 7
    An internal software error has occurred. Please contact National Instruments technical support at ni.com/support with the following information:
    Error 7 occurred at Read from Text File in nirviGetInstantiation_cRIO-IDSel_Timer.vi->nirviGetInstantiation_cRIO-IDSel_Timer.vi.ProxyCaller
    Possible reason(s):
    LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
    =========================
    NI-488: Nonexistent GPIB interface.
    C:\NIFPGA\compilation\cRioController_8-SlotFPGA_FPGA-TriggerTest_C06156E2\IDSel_Timer.vhd
    I tried to do some digging to see what could possibly be happening, and I noticed that LV is looking for the vhdl files in the wrong folder (see the line highlighted in red above), when generating the vhdl files, LV will place them inside the "source_files" folder under the compilation project, but for some reason it is trying to find them under the root folder not inside the source_files folder!!!
    Does anyone have any idea why LV would be looking for these files in the wrong subfolder? 
    Thank you,
    Aws
    Attachments:
    Code Generation Errors.png ‏35 KB

    Hi Aws_Khudhair,
    What version of LabVIEW are you using? And what version of the FPGA module? From what I found, it seems as though this is primarily an issue with LabVIEW 8.6 and 8.6.1.
    http://digital.ni.com/public.nsf/allkb/A711119FE89E39E78625754E00075E92
    This forum also discusses a similar issue:
     http://forums.ni.com/t5/Real-Time-Measurement-and/FPGA-compile-errors-after-generating-intemediate-f...
    It may also be worth repairing/reinstalling the FPGA Module and the Xilinx compile tools.
    Catherine B.
    Applications Engineer
    National Instruments

  • Generic oracle eway code generation error in Java caps 5.1.3

    Hi,
    I'm using an oracle eway for adding records to a table. I have a prepared statement in the otd. When I try to build the project I'm getting the following error. Could any one let me know how this problem can be fixed?
    com.stc.codegen.framework.model.CodeGenException: Generic Oracle eway code generation error(ERROR_CODEGEN_GENERIC_CODELET_GENERAL)
         at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateFiles(OracleEWayCodeletFactory.java:1860)
         at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.processCodelets(CodeGenFrameworkImpl.java:640)
         at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.process(CodeGenFrameworkImpl.java:1544)
         at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:405)
         at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:308)
         at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.traverseDeployment(DeploymentVisitorImpl.java:268)
         at com.stc.codegen.driver.module.DeploymentBuildAction.loadCodeGen(DeploymentBuildAction.java:923)
         at com.stc.codegen.driver.module.DeploymentBuildAction.access$1000(DeploymentBuildAction.java:174)
         at com.stc.codegen.driver.module.DeploymentBuildAction$1.run(DeploymentBuildAction.java:599)
         at org.openide.util.Task.run(Task.java:136)
         at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:599)
    Caused by: com.stc.codegen.framework.model.CodeGenException: Exception when generating OTD code ...Exception: javaClass: Oracle_std_otdOTD: Exception when invoke DB Codegen Task...Exception: Invalid parameter type: Class : [Std_insert_PreapredStat] Object: [Param1] Param Type : [DECIMAL].(ERROR_CODEGEN_DB)(ERROR_CREATE_OTD)
         at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateOtdJarFile(OracleEWayCodeletFactory.java:2045)
         at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateFiles(OracleEWayCodeletFactory.java:1756)
         ... 10 more
    Regards,
    Abdul

    hi...
    i too getting same problem..how did u reslove this...
    please help me out...
    thanks in advance
    KK

  • NI Motion Assistant LabVIEW Code Generation Error

    Hello, the following is my current setup:
    NI PCI-7334 motion control board
    NI UMI 7774 splitter board
    3 x NI P70530 Drives
    3 x NI CTP12ELF10MAA00 Stepper Motors
    3 x Power supply units for drives
    LabVIEW 2010
    NI Motion Assistant 2.6
    Motion and Automation Explorer 4.7
    I have built a three axis motion system that I am trying to configure with labview. After verifying that everything was set up correctly, I opened MAX, updated the firmware to my motion control board, and intitialized the controller. Since then, I have created many basic programs using the Motion Assistant Software to test the movement of my device. Everything works fine while using the Motion Assistant software (I have three axis movement, multidirectional control, and can perform various straight line and arc moves). My problems begin when I try to use the code generation feature.
    When trying to use the code generation feature to output a labview diagram, I run into a problem where a dialog box pops up and says "Find the vi named ...."
    Some examples of the names that come up are: Configure Vector Space.flx, Vector Space To Control.flx, Motion Error Handler.flx.
    To be clear the program in Motion Assistant that I am trying to export to LabVIEW code is composed of two individual steps. One that tells X,Y, and Z motors to move forward 25 revolutions, and one step that tells them to move backwards 25 revolutions.
    I have made many other programs in Motion Assistant that run fine, but I always receive similar errors when trying to use the code generation feature to export to LabVIEW. Is there something that I can do to solve my problem?
    Thank you for your help.

    Hi Joe,
    I am using Ni-Motion Assistant 2.6, Ni-Motion 8.1, and Motion and Automated Explorer version 4.7.
    The code I posted is supposed to tell Axis 1 to move 40 revolutions at 400 rpm. It works fine in Ni-Motion Assistant but when I try to generate a LabVIEW diagram I receive the following error, "Find the VI named 'Motion Error Handler.flx'". I have had it search my directory, as well as the disk that I installed both LabVIEW and Ni-Motion but no luck. Thanks for your help.
    Attachments:
    1111.vi ‏9 KB
    1 axis movement.zip ‏8 KB

  • Code generation error when implementing an accumalator

    Hi everyone,
    I am implementing an accumalator which implements X = X + Y where X and Y are memories of length say 5. Initially I write 5 values into X and Y using a for loop. Then I perform the addition inside a single cycle timed loop and store the results in a temporary buffer(another memory) again of length 5. In another single cycle timed loop, I copy the data from the temporary buffer to memory X.
    I changed the arbitration option to never arbitrate for X, but I get a code generation error because of arbitration. Could anybody please tell how to solve this problem.
    Regards,
    Prashant
    Solved!
    Go to Solution.

    Hi NitzZ
    I figured out a way to solve the problem. I chose the "Never Arbitrate" option for all memories and replaced the for loop with a timed loop. Now there are no errors.
    Thanks,
    Prashant

  • Code Generation Error - SUP 2.2 / SUW 2.2

    Hi,
    I have formatted my laptop PC and re-installed Sybase Unwired Workspace 2.2. After the installation I get Code Generation Error message:
    Before Code Generarion attemp the Java Build Path / Source tab is empty and after the Code Generation the error specified above is generated and the following path is added to the Java Build Path / Source tab:
    XXX/Generated Code/src (missing)
    I cannot resolve the problem. Does anybody has idea about the problem?
    thanks,

    Hi,
    1. I created a new model having only one MBO and generated code successfuly.
    2. The result is the same after deletion of "Generated Code" and creating new folder
    3. The result is the same after generation code to another folder.
    nothing has changed but I discovered additional information in the "workspace\.metadata\.log" file:
    com.sybase.uep.tooling.codegeneration.coordinator.CoordinatorException: Member not found: inverseClass on object com.sybase.afx.compiler.AttributeDef@2a3881
      at com.sybase.uep.tooling.codegeneration.coordinator.impl.ClientObjectAPICoordinator.sendRequest(ClientObjectAPICoordinator.java:115)
      at com.sybase.uep.tooling.codegeneration.ui.CodeGenerationJob.sendRequest(CodeGenerationJob.java:200)
      at com.sybase.uep.tooling.codegeneration.ui.CodeGenerationJob.processTasks(CodeGenerationJob.java:172)
      at com.sybase.uep.tooling.codegeneration.ui.CodeGenerationJob.runInWorkspace(CodeGenerationJob.java:123)
      at org.eclipse.core.internal.resources.InternalWorkspaceJob.run(InternalWorkspaceJob.java:38)
      at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
    Caused by: com.sybase.uep.tooling.codegeneration.clientobjectapi.ClientObjectAPIException: Member not found: inverseClass on object com.sybase.afx.compiler.AttributeDef@2a3881
      at com.sybase.uep.tooling.codegeneration.coordinator.CoordinatorException.<init>(CoordinatorException.java:27)
      ... 6 more
    Caused by: com.sybase.modeling.templatej.runtime.adapter.impl.NoSuchMemberException: Member not found: inverseClass on object com.sybase.afx.compiler.AttributeDef@2a3881
      at com.sybase.uep.tooling.codegeneration.CodeGenerationException.<init>(CodeGenerationException.java:26)
      at com.sybase.uep.tooling.codegeneration.clientobjectapi.ClientObjectAPIException.<init>(ClientObjectAPIException.java:27)
      at com.sybase.uep.tooling.codegeneration.clientobjectapi.impl.ClientObjectAPIDelegator.generate(ClientObjectAPIDelegator.java:155)
      at com.sybase.uep.tooling.codegeneration.coordinator.impl.ClientObjectAPICoordinator.sendRequest(ClientObjectAPICoordinator.java:86)
      ... 5 more

  • Fpga code generation error after updating from 8.5.0 to 8.5.1

    Hi All,
    I have a FPGA-VI which was compiled in LV 8.5.0 without errors. After I updated to 8.5.1 the Code Generation stops, telling me the clock domain is not supported for write FPGA I/O node (see attachment).  Also I attached a picture of a simplified FPGA-VI which brings up the same error.
    I use a PXI-7833R connected to a cRIO-9151 R Series Expansion Chassis with a NI-9421 modul (8-ch DI, 24V) installed in it.
    My original FPGA-Code has a theoretical maximum of 22MHz, so I can't change the clock domain to 40MHz.
    Do you have any suggestion how to get the VI compiled?
    Uli
    Solved!
    Go to Solution.
    Attachments:
    ErrorMessage1.jpg ‏30 KB
    FPGA-VI1.jpg ‏17 KB

    Hi Ruhmann, hi Basset Hound,
    thank you for your reply and giving me a better insight in things.
    I started my VI with 40MHz clock domain. The Vi got bigger, some more logic here and some more code there. Finaly the compiler couldn't satisfy the timing any more. Instead of optimising the code, I reduced the clock domain.
    Until your post I didn't realise I use CompactRIO I/O. Is There a difference to (let me call it) "direct R-Series I/O"?
    I need the Expansion Chassis (Connector 1), the 9421 (8-ch DI) and 94?? (8-ch DO) to connect 24V logic to the FPGA. Additionally I have two SCB-68 (Connector 2+3) for 5V logic (DI, DO, A/B linear position measurement, pulse generation) and some analog input. All code in 1 VI, but distributed in 3 loops.
    To change the clock domain back to 40MHz, I have to optimise my code . Well, the code is sloppy , so optimising is OK .
    To tell the hole story:
    After updating to 8.5.1, my first contact to NI was by phone. The engineer asked for the Code, the project and the hardware.
    It took a while for me to put the information in an email. Meanwhile engineer the found a paper with the solution I
    mentioned in my second post and send it to me, before looking at my code. The paper said someting about "tightend timing constraints",
    "safe communication" and "multiple DMA target to host transfer". Not exactly what I was doing, but I reinstalled
     RIO 2.3.1 and ... compile successful.
    @ Basset:
    The simple VI (picture) in my first post reproducese the issue exactly.
    I'm not at work any more, so I can't provide the full code or the SRQ# until tuesday (holiday on monday ).
    FYI I'm located in Germany, so I called the german NI support.
    Uli

  • Error 91 by Statechart Code Generation

    I have problems with statechart formerly created with LV2009. Now I want to use this statechart with LV2012 but by generation of statechart I get the following message:
    Failed to generate statechart. Fehler 91 bei Statechart Code Generation
    Mögliche Ursachen:
    LabVIEW:  Der Datentyp des Variant ist nicht kompatibel mit dem Datentyp, der mit dem Eingang verbunden ist.
    I deleted some VIs with Variant but I get the same message. It is a complex statechart - how can I find the reason for the error? With LV2009 everything was OK - but now I have a new computer with Win7-x64 an want to use LV2012.
    After confirmation of error message i get a lot of error messages with the hint to typdefinitions in State/Inputs/Outputs but in the typdefinitions I didn't do any changes.
    Solved!
    Go to Solution.

    Hi Stephan,
    I could solve the problem meantime by try and error (successive delete of states and so on). A reference to a .net-dll cause the error. The reference was in the StateData.ctl until now, because I need this reference in several states. Now I use a global variable to store the reference - not very nice, but I get no more errors from the statechart. The error message from LV2012 is misleading by this problem.
    Regards,
    Kai

  • Error in Rule Generation

    We are configuring RAR 5.3, and so far we successfully uploaded all text files. But when we try to generete the rules for logical systems in a background job, after 45 minutes the following error is shown:
    Nov 4, 2008 9:56:02 AM com.virsa.cc.comp.VirsaXSR3_01Interface execute
    WARNING: VIRSAXSR3_01: Cannot execute BAPI RoleList
    java.lang.NullPointerException
         at com.virsa.cc.common.ModelNodeUtil.copyNodeTreeToModel(ModelNodeUtil.java:42)
         at com.virsa.cc.comp.VirsaXSR3_01Interface.execute(VirsaXSR3_01Interface.java:267)
         at com.virsa.cc.comp.wdp.InternalVirsaXSR3_01Interface.execute(InternalVirsaXSR3_01Interface.java:1341)
         at com.virsa.cc.comp.wdp.InternalVirsaXSR3_01Interface$External.execute(InternalVirsaXSR3_01Interface.java:1376)
         at com.virsa.cc.comp.BackendAccessInterface.executeBAPIModel(BackendAccessInterface.java:3314)
         at com.virsa.cc.comp.BackendAccessInterface.execBAPI(BackendAccessInterface.java:398)
         at com.virsa.cc.comp.BackendAccessInterface.executeBAPI(BackendAccessInterface.java:301)
         at com.virsa.cc.comp.wdp.InternalBackendAccessInterface.executeBAPI(InternalBackendAccessInterface.java:4227)
         at com.virsa.cc.comp.BackendAccessInterface.searchRole(BackendAccessInterface.java:776)
         at com.virsa.cc.comp.wdp.InternalBackendAccessInterface.searchRole(InternalBackendAccessInterface.java:4283)
         at com.virsa.cc.comp.wdp.InternalBackendAccessInterface$External.searchRole(InternalBackendAccessInterface.java:4740)
         at com.virsa.cc.dataextractor.bo.DataExtractorSAP.searchObj(DataExtractorSAP.java:382)
         at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.getObjArray(AnalysisEngine.java:395)
         at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:695)
         at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysisRE(AnalysisEngine.java:2706)
         at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonWS.start(AnalysisDaemonWS.java:78)
         at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:434)
         at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1223)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
         at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:480)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Nov 4, 2008 9:56:02 AM com.virsa.cc.comp.VirsaXSR3_01Interface execute
    WARNING: VIRSAXSR3_01: Cannot execute BAPI RoleList
    java.lang.NullPointerException
         at com.virsa.cc.common.ModelNodeUtil.copyNodeTreeToModel(ModelNodeUtil.java:42)
         at com.virsa.cc.comp.VirsaXSR3_01Interface.execute(VirsaXSR3_01Interface.java:267)
         at com.virsa.cc.comp.wdp.InternalVirsaXSR3_01Interface.execute(InternalVirsaXSR3_01Interface.java:1341)
         at com.virsa.cc.comp.wdp.InternalVirsaXSR3_01Interface$External.execute(InternalVirsaXSR3_01Interface.java:1376)
         at com.virsa.cc.comp.BackendAccessInterface.executeBAPIModel(BackendAccessInterface.java:3314)
         at com.virsa.cc.comp.BackendAccessInterface.execBAPI(BackendAccessInterface.java:398)
         at com.virsa.cc.comp.BackendAccessInterface.executeBAPI(BackendAccessInterface.java:301)
         at com.virsa.cc.comp.wdp.InternalBackendAccessInterface.executeBAPI(InternalBackendAccessInterface.java:4227)
         at com.virsa.cc.comp.BackendAccessInterface.searchRole(BackendAccessInterface.java:776)
         at com.virsa.cc.comp.wdp.InternalBackendAccessInterface.searchRole(InternalBackendAccessInterface.java:4283)
         at com.virsa.cc.comp.wdp.InternalBackendAccessInterface$External.searchRole(InternalBackendAccessInterface.java:4740)
         at com.virsa.cc.dataextractor.bo.DataExtractorSAP.searchObj(DataExtractorSAP.java:382)
         at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.getObjArray(AnalysisEngine.java:395)
         at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:695)
         at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysisRE(AnalysisEngine.java:2706)
         at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonWS.start(AnalysisDaemonWS.java:78)
         at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:434)
         at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1223)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
         at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:480)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Whe try then to generete the rules in foreground to see what happens and we got a different error:
    Error in Rule Generation! Reason:ResourceException in method ConnectionFactoryImpl.getConnection():
    com.sap.engine.services.connector.exceptions.BaseResourceException: Cannot get connection for 120 seconds.
    Possible reasons:
    1) Connections are cached within SystemThread(can be any server service or any code invoked within SystemThread in the SAP J2EE Engine),
    2) The pool size of adapter "SAPSR3DB" is not enough according to the current load of the system or
    3) The specified time to wait for connection is not enough according to the pool size and current load of the system.
    In case 1) the solution is to check for cached connections using the Connector Service list-conns command,
    in case 2) to increase the size of the pool and
    in case 3) to increase the time to wait for connection property. In case of application thread,
    there is an automatic mechanism which detects unclosed connections and unfinished transactions.
    Reading the descriptions in both errors, it seems like the RAR application is trying to connect to the back end system during rule generation. Is this correct?
    We followed all the recommendations indicated in the post-installation for RAR 5.3.
    Any ideas??

    Dear Pablo,
    Please check if you have changed your Jco pool configuration as below :
    JCo pool configuration            Original      Change u2013 as per
                                                                    SAP note
    Maximum pool size            50     100
    Maximium connections     100     1800
    Connection timeout ( milli sec )     100     10000
    Max waiting time ( milli sec )     30     30000
    also check if you have done eisk analysis performance tuning
    for :
    batch size - 1000,
    number of web service threads - 5,
    number of background job worker threads - 3,
    rfc timeout for web services/background job worker threads ( min) -  1441.
    Hope this is useful to you.
    Edited by: Yajuvendra Subhash Sonalkar on Nov 7, 2008 9:00 AM

  • Error in template generation...

    Hi,
    I´m doing an app, but when i click in apply template under the component controller, appear this error:
         Status ERROR
    Plugin : com.sap.ide.metamodel.common.services.eclipse
    code=0
    Internal error
       Plugin name: Metamodel Common Services for Eclipse
       Internal error  : com.sap.ide.metamodel.common.services.eclipse
       Class      : com.sap.ide.mmservices.common.eclipse.internal.template.apply.ApplyTemplateWizard$1
       Method     : performFinish()
       Message    : Error in template generation
       Exception  : java.lang.NullPointerException: null
    java.lang.NullPointerException
    at com.sap.tc.mobile.wdlite.ide.servicetemplate.generation.GeneratorHelper.insertCodeInController(GeneratorHelper.java:87)
    at com.sap.tc.mobile.wdlite.ide.servicetemplate.generation.GeneratorHelper.insertCodeInMethod(GeneratorHelper.java:80)
    at com.sap.tc.mobile.wdlite.ide.servicetemplate.generation.ServiceTemplateGeneration.generateCoding(ServiceTemplateGeneration.java:197)
    at com.sap.ide.mmservices.common.eclipse.internal.template.generation.GenerationStartup.generateFragments(GenerationStartup.java:246)
    at com.sap.ide.mmservices.common.eclipse.internal.template.generation.GenerationStartup.generate(GenerationStartup.java:87)
    at com.sap.ide.mmservices.common.eclipse.internal.template.apply.ApplyTemplateWizard$1.run(ApplyTemplateWizard.java:65)
    at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:67)
    at com.sap.ide.mmservices.common.eclipse.internal.template.apply.ApplyTemplateWizard.performFinish(ApplyTemplateWizard.java:62)
    at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:742)
    at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:373)
    at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:616)
    at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:227)
    at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
    at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)
    at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)
    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)
    at org.eclipse.jface.window.Window.runEventLoop(Window.java:820)
    at org.eclipse.jface.window.Window.open(Window.java:796)
    at com.sap.ide.mmservices.common.eclipse.template.actions.ApplyTemplateAction.run(ApplyTemplateAction.java:28)
    at com.sap.ide.mmservices.common.eclipse.template.TemplateInvoker.startApplyTemplateAction(TemplateInvoker.java:78)
    at com.sap.ide.mmservices.common.eclipse.template.TemplateInvoker.startApplyTemplateWizard(TemplateInvoker.java:34)
    at com.sap.ide.webdynpro.wdexplorer.actions.other.ApplyTemplateAction.run(ApplyTemplateAction.java:48)
    at com.sap.ide.tools.core.viewerfwk.internal.actions.BaseDelegateSingleAction.runInternal(BaseDelegateSingleAction.java:65)
    at com.sap.ide.tools.core.viewerfwk.internal.actions.BaseDelegateSingleAction.run(BaseDelegateSingleAction.java:58)
    at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:256)
    at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:545)
    at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:490)
    at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:402)
    at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
    at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)
    at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)
    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)
    at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2389)
    at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2353)
    at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2219)
    at org.eclipse.ui.internal.Workbench$4.run(Workbench.java:466)
    at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:289)
    at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:461)
    at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
    at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:106)
    at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:153)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:106)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:76)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:363)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:504)
    at org.eclipse.equinox.launcher.Main.basicRun(Main.java:443)
    at org.eclipse.equinox.launcher.Main.run(Main.java:1169)
    at org.eclipse.equinox.launcher.Main.main(Main.java:1144)
    What happend?
    Too, appear this error when i try to import the data object:
    Could be anything bad install?
    Thanks in advance,
    Regards,

    Hi Victor,
    it seems you have a general problem in the way you create your data model. Actually from this point I can not say what is wrong- but if I take all your problems together, you have done something wrong in the creation already - and so the import fails. Check your model prior to import please.
    Regards,
    Oliver

  • VLD-1141: Internal error during mapping generation.

    I am getting the "VLD-1141: Internal error during mapping generation" error when deploying a mapping. This mapping was previously working fine. As part of a re-factoring effort, for all the underlying tables and views, we replace 2 existing columns with a new column. All the objects were successfully re-imported and synchronized in the mapping. The mapping is using Mapping Input Parameter, Lookups, Expression Transformations, Splitter, Set Operator, Source & Target Tables. All these transformation were part of the earlier working version of the mapping.
    On doing validation within the mapping, I get a success message followed by 4 warning for the Lookup Condition on key Lookup does not contain a complete unique key. Before the re-factoring effort, I was getting the same 4 warning messages, however the mapping was executing correctly.
    When I do Generate within the mapping, I get the following message:
    Code cannot be generated.
    Click the message tab for details.
    In the Design Center, when I do a validation on the mapping I get the following error:
    VLD-1141: Internal error during mapping generation.
    java.lang.NullPointerException
    at oracle.wh.service.impl.mapping.component.Sequence.getSequenceExpressions(Sequence.java:138)
    at oracle.wh.service.impl.mapping.component.Sequence.doSequenceValidation(Sequence.java:239)
    at oracle.wh.service.impl.mapping.component.entity.EntitySqlDelegate.prepareOutputContext2(EntitySqlDelegate.java:123)
    at oracle.wh.service.impl.mapping.component.entity.EntitySqlDelegate.prepareOutputContext2(EntitySqlDelegate.java:97)
    at oracle.wh.service.impl.mapping.component.entity.EntitySqlDelegate.prepareOutputContext(EntitySqlDelegate.java:78)
    at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:240)
    at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assembleSetBasedInternal(PlSqlGenerationMediator.java:2108)
    at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assembleSetBased(PlSqlGenerationMediator.java:2090)
    at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assemble(PlSqlGenerationMediator.java:541)
    at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:798)
    at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:335)
    at oracle.wh.service.impl.mapping.generation.WBDeployableMappingGenerator.generate(WBDeployableMappingGenerator.java:102)
    at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:433)
    at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:311)
    at oracle.wh.service.impl.generation.service.WhValidationGenerationTransaction.run(WhValidationGenerationTransaction.java:251)
    Any help in this regards would be appreciated.
    Naval

    Hi,
    I think your mapping is corrupted by converting two columns to one. The owb has always a problem if you change the structure of a table which is bound to a table operator. The way to avoid this is to drop the table operator after changing the table in the table editor and recreate it with the changed table definition.
    Make a test: select the new attribut in the table operator and look left on the configuration window. To which table and attribute it's bound?
    Regards,
    Detlef

  • Error in Webservice Call HTTP error (return code 404, message conn failed)

    Hi
    We wish to call  a standard EP7 webservice through ABAP.
    When we try to create consumer proxy , we get the following error.
    HTTP error (return code 404, message "conn failed")
    Message no. SPRX090
    ==> Display Error Document
    If you want to generate a proxy for an external WSDL document by specifying a URL, check that the proxy settings of the system are correct (transaction SICF - Client - Proxy Settings). If you want to generate a proxy for an XI Repository object, check the connection to the Enterprise Services Builder as follows:
    Check List for Setting Up a Connection to the Service Repository
    1. The address of the Enterprise Services Repository must be known in the SAP system
    Check with report SPROX_CHECK_IFR_ADDRESS
    The address is taken from the following parameters in the exchange profile ('Connections' section):
    com.sap.aii.connect.repository.name: Server (for example,pwdf0436)
    com.sap.aii.connect.repository.httpport: Port (for example, 1080)
    com.sap.aii.connect.repository.contextroot: Root (for example,rep)
    The logon data is also read from the exchange profile ('ApplicationSystem' section):
    com.sap.aii.applicationsystem.serviceuser.name: User
    com.sap.aii.applicationsystem.serviceuser.pwd: Password
    As an alternative to using the exchange profile, you can maintain the RFC destination SAP_PROXY_ESR. If this RFC destination is maintained it will be used by the proxy generation in place of data from the exchange profile to access the Service Repository. In this case, the Exchange Profile will even not be read.
    The RFC destination has to be set up using transaction SM59 and should look like this:
    RFC Destination: SAP_PROXY_ESR
    Connection Type: G (HTTP Connection to External Serv)
    Description1: ESR for Proxy Generation
    Target Host: esr_host
    Service No: 1080
    Path Prefix: rep
    Logon and Security:
    Basic Authentication: active
    User: esr_user
    Password: esr_password
    2. The HTTP Framework of the Web Application Server must function
    Check with report SPROX_CHECK_HTTP_COMMUNICATION
    If necessary, contact your system administrator. Please be aware of the fact, that the HTTP framework is depending on the application server. Thus the result of the report may differ for different application servers.
    3. Proxy generation must interpret the data of the Enterprise Services Repository correctly
    Check with report SPROX_CHECK_IFR_RESPONSE
    you can also login in dev and go to Xn se91
    enter msg id SPRX and msg no 090
    select the message and click on long text..
    you get the same message in a formatted manner..
    How to get rid of this ?
    Regards
    Rajendra

    Hi
    we have given the correct path as we have tested the webserive from
    other technology (.net) by providing the same path.
    regards
    Rajendra

Maybe you are looking for

  • Version 5.1 and iPhoto problems?

    I have an AT&T iPhone 4 running 5.1 and now my photos will not sync with iPhoto which is 9.2.2. I have checked cables and connections. The phone itself is syncing fine with iTunes 10.6(40). However, the phone is not recognized through Image Capture o

  • Oracle Sql Developer Installation

    Hi Guys, I will be using oracle sql developr at my place and currently installed it at my personal pc.I am very new to the Oracle Sql Developer. I am not able to connect to the Oracle sql Developer.I have Oracle 9i db and oracle forms 10G running and

  • Purchase of itunes credit

    Dear all, I come from a country, Singapore that does not allow me to purchase movies and music from itune store. I heard of itunes credit - how to purchase them and where can I get it from - i know can purchase from apple store online in USA but only

  • No Bcc: Option When Emailing from iphoto '11 - Lame

    I want to send the same picture from iphoto '11 to a group from my address book, but I want to send from the bcc: field. I want to protect the privacy of the group. Why isn't there an option to send photos from iphoto '11 bcc:? Lame. Am I missing som

  • Sql delete command

    I have one table emp, here emp having 3 fields, names like empno,ename,job. SQL> select *From emp; EMPNO ENAME JOB 23 SEKHAR JAVA 34 RAVI DBA 12 ramesh testing I want to delete empno column and job column do not use rowid,fields. I want output like t