Error in configuration of Sales BAPI

Hi Experts,
I am using the BAPI BAPI_SLSTRANSACT_CREATEMULTI to create a quotation with configured material. The quotation was created successfully, but with only the header material ( there are no sub-configurations present(the BOM is not exploding) ).
It gives a error as configuration is incomplete.
When the configuration tab of order is clicked in the change mode, then the required sub-configuration (BOM explosion) is created automatically without doing any changes to the order.
Please let me know for any solution for this ASAP.
Thanks in Advance
Regards
Suthagar.

Hi Shuja
I guess the message is just a warning eventhough the order is created. The warning message states that Auto-Delivery can not be created.
Please check below to understand how the customer is blocked:
1. Manual Block -> Transaction XD03
-->Menupath: Extras->Blocking Data
2. Credit Block -> Transaction FD33
--> In the overview screen check the difference of value between Credit Limit & Credit Exposure
  I guess in the case whereby Credit Limit value is less than Credit Exposure also this can happen.
Please try using a different Customer. Also simulate via transaction VA01.
Hope this helps.
Kind Regards
Eswar

Similar Messages

  • Error in Configuration of Sales CRM BAPI

    Hi Experts,
    I am using the BAPI BAPI_SLSTRANSACT_CREATEMULTI to create a quotation with configured material. The quotation was created successfully, but with only the header material ( there are no sub-configurations present(the BOM is not exploding) ).
    It gives a error as configuration is incomplete.
    When the configuration tab of order is clicked in the change mode, then the required sub-configuration (BOM explosion) is created automatically without doing any changes to the order.
    Please let me know for any solution for this ASAP.
    Thanks in Advance
    Regards
    Suthagar.

    Hi Shuja
    I guess the message is just a warning eventhough the order is created. The warning message states that Auto-Delivery can not be created.
    Please check below to understand how the customer is blocked:
    1. Manual Block -> Transaction XD03
    -->Menupath: Extras->Blocking Data
    2. Credit Block -> Transaction FD33
    --> In the overview screen check the difference of value between Credit Limit & Credit Exposure
      I guess in the case whereby Credit Limit value is less than Credit Exposure also this can happen.
    Please try using a different Customer. Also simulate via transaction VA01.
    Hope this helps.
    Kind Regards
    Eswar

  • Configuration Validation error when booking an Sales Order.

    Hi,
    Getting an error when booking an sales order ie; "Configuration Validation error".
    We are upgrading from 11.5.8 to 12.1.1 and this issue is critical. Please provide your valuable suggestion and advice.
    Thanks in advance,
    Asif

    It seems you use configurator. Is this happening in production or in some test instance?
    If it is a test instance, when was it cloned from prod? Did you clone the configurator instance at the same time?
    1) You should publish the configurator model from the configurator developer to this new instance.
    2) Also, it is possible that the selections made during order entry earlier are not valid anymore due to ECO/BOM changes or due to configurator rule changes. Open the configuration, make any selections if necessary and then click ok.
    This will repopulate the order lines then you should be able to book the order.
    Hope this helps
    Sandeep Gandhi
    Independent Techno-functional Consultant

  • Internal error in communication between configuration and sales document

    Hi,
    While i am doing VA32 i got this message  plz advise me..
    Internal error in communication between configuration and sales document
    in the form GET_CONFIG_MODE
    bit urgent  issue..
    Regards,
    San Rao.

    Hi
    Pls check the OSS note 836097, which can solve your problem.
    In my experience, I can tell you something
    When configuration is done, the configuration object is stored in VBAP-CUOBJ for the item. For this CUOBJ, you can find the configuration in the tcode CUTABLEINFO or in tables IBIB, IBIN, IBEXTINST, IBINOBS,IBINOWN,IBST,IBSTREF,IBINVALUES.
    If for the order if VBAP-CUOBJ is not available, then it will not be able to get the configuration. The error message in this case is V1 854 of message class V1.
    You can search for some other OSS notes also using this error message and the form name.
    Also refer to 173726, 174333,175372 and 173664

  • VA02 Internal error in comm. bt configuration and sales doc.GET_CONFIG_MODE

    Hi all,
    I am on ECC6.0 and get this error. I deleted SD BOM in CS62 and tried opening order in VA02 but no luck; same error: "Internal error in communication between configuration and sales doc.GET_CONFIG_MODE"
    I following instruction in notes below (Execute function module)
    You must enhance the interface of function module CUKO_DDB_CONFIGURATION_FINISH by import parameter IV_NO_CBASE (reference type C, proposal SPACE, optional).
    In Release 4.6C, you must also implement Note 368412.
    Appreciate if anyone has other suggestions,
    Many thanks,
    Hetal

    Hello Hetal,
    SAP note 900047 describes a possible reason for this error message.
    The note also describes how to use report RCU_CHECK_CONFIGURATION (see SAP note 200914) to be able to open the affected sales orders again.
    Hope this helps.
    Best regards,
    Daniela Hukle

  • Error while creating a sales order BAPI_SALESORDER_CREATEFROMDAT2

    Hi All,
    I am using the BAPI BAPI_SALESORDER_CREATEFROMDAT2 to create a sales order.
    I am passing all the required fields and also the rejection code at the item level.
    Also I am using a variant configuration material and hence ai am filling the VC config tables.
    When I execute this BAPI it is giving me the error 'Item 000010's configuration can no longer be changed' although configuration is maintained for this material.
    When I try the same case with no rejection code and with VC configuration, the sales order is created.
    When I try the same case again with rejection code and NO VC configuration, the sales order is created.
    When I maintain both the rejection code and VC configuration I am getting the error.
    Does anyone have any idea what is causing this error or I am supposed to populate any flag in ORDER_ITEMS_INX to get this correctly.
    Any answers will be greatly apppreciated!
    Thanks
    Sandeep

    Sandeep,
    There are a few SAP Notes that you should investigate, some of which you may have already seen.  First, I'd suggest you look at [Note 481102|https://service.sap.com/sap/support/notes/481102] and its three related Notes: [774346|https://service.sap.com/sap/support/notes/774346], [550431|https://service.sap.com/sap/support/notes/550431], [366265|https://service.sap.com/sap/support/notes/366265].
    If these Notes do not help then check if [Note 1099414|https://service.sap.com/sap/support/notes/1099414] has been applied in your system.  If it has been applied, then [Note 1116144|https://service.sap.com/sap/support/notes/1116144] might solve your issue.  If neither of these two notes are applied, then it could be that they both need to be applied.  However, if both notes are already applied, then you may want to consider opening a customer message with SAP.  Since these two SAP Notes are relatively new, it makes me think that you might have discovered a related error that has not been reported to SAP yet.
    Best Regards,
    Jamie

  • Error while saving the Sales Order

    Hi experts,
        i am getting a runtime error while saving a sales order stating: SAPSQL_EMPTY_TABNAME. It says the field T681-KOTAB could be empty. I would give in more inputs. Someone plz help.
    Thanks.

    I would expect that KOTN521 would be a Database table defined in the ABAP Dictionary that relates to the condition implemented in 521 for the usage specified in that record.
    You should be able to go into the info system, SE84, and search under ABAP Dictionary / Database Tables to see what KOTN521 is.
    Also, since the only Keys to T681 are KVEWE and KOTABNR, and there are two KOTABNR entries with a value of 521, then there must be two different usages (KVEWE) associated with that table.
    If you see what they are, you can check to see what the usages represent.   Based on a lookup, it appears that a usage of N is for Free Goods, A is for Pricing etc.   In our system, we only have A entries.
    What are the usages for the 521 entries?  Do they relate to Free Goods/Pricing???
    Does the table KOTN521 exist in the ABAP Dictionary?
    Answering these questions may get you closer to the answer.
    Can you compare the values in these entries to what you have in different SIDs?
    Is this problem happening in Production, or is it still in a development or Quality Assurance client?
    If it is still in development or Q, then it may be that a recent customization change was made.
    Compare the entries across your systems, if possible.
    Good luck
    Brian

  • RunTime Error while saving a Sales Order

    Hi All,
    When i am saving a Sales Order, the system is throwing a Runtime Error.
    The ABAP Code in the Runtime Error screen as follows.
              select * from (t681-kotab) appending table <cond_tab>
                     up to 1 rows
                     where kappl  = se_kappl
                     and   kschl  = se_kschl
                     and   datbi >= se_date
                     and   datab <= se_date
                     and   (coding_tab).
    Till these days, there was no such error while saving a Sales Order.
    How to resolve this issue?
    Regards
    Pavan

    Hi,
    The below piece of code is trying to get the contents of the table mentioned in T681-KOTAB.
    select * from (t681-kotab) appending table <cond_tab>
    up to 1 rows
    where kappl = se_kappl
    and kschl = se_kschl
    and datbi >= se_date
    and datab <= se_date
    and (coding_tab).
    The reason could be is someone has screwed up the entries in T681 table. Check that out.
    Try to put a break point on this SELECT query and see what the value of T681-KOTAB holds before the SELECT query. Check whether such a table entry exists in DB.
    Let me know if you are still stuck up.
    If you can send me the ST22 dump of the run time error, i might be able to help you more  on this.
    Hope this helps.
    Thanks,
    Balaji

  • Error reading configuration file

    I've setup the Adobe Access 4.0 trial license server and when I run the Validator.bat with -g -r on the Tomcat install dir \licenseserver I get an 'Error reading configuration file' message. Here is the log dump:
    [] 2012-12-20 22:46:32,176 INFO  [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.context.SimpleContex tFactory] Creating class loader for partition 'flashaccessserver' with libraries '[file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/, file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/flashaccess-license-server-ext-samp le.jar]'
    [] 2012-12-20 22:46:32,582 ERROR [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.tools.Validator] Failed to validate tenant deployment 'flashaccessserver/sampletenant'
    com.adobe.flashaccess.server.common.configuration.ConfigurationException: Error reading configuration file
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:139)
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl .<init>(TenantConfigurationImpl.java:110)
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.CommonsConfigurationBas edFactory.getTenantConfiguration(CommonsConfigurationBasedFactory.java:90)
              at com.adobe.flashaccess.server.license.tools.Validator.validateTenantDeployment(Validator.j ava:255)
              at com.adobe.flashaccess.server.license.tools.Validator.validatePartitionDeployment(Validato r.java:283)
              at com.adobe.flashaccess.server.license.tools.Validator.validateGlobalDeployment(Validator.j ava:301)
              at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:173)
              at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:117)
    Caused by: org.apache.commons.configuration.ConfigurationException: Unable to load the configuration
              at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:863)
              at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:821)
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:134)
              ... 7 more
    Caused by: org.xml.sax.SAXParseException; lineNumber: 121; columnNumber: 16; cvc-complex-type.2.4.b: The content of element 'KeyServer' is not complete. One of '{"http://licenseserver.flashaccess.adobe.com/tenant":File}' is expected.
              at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(Unkno wn Source)
              at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator$XSIErrorReporter.reportErro r(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.reportSchemaError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidComplexT ype(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidType(Unk nown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.processElementContent(Unkno wn Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.handleEndElement(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.endElement(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unk nown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDri ver.next(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unkno wn Source)
              at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(Unknown Source)
              at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:855)
              ... 9 more
    I'm using a relative path to my .pfx file for both the transportServerCredential and licenseServerCredential in the flashaccess-tenant.xml and my password has been scrambled using the Scrambler.bat.
    Also, when I verify setup using http://<LicenseServer>:8080/flashaccessserver/flashaccess/license/v2 I get the message 'License server is setup correctly.'
    Any ideas of why the Validator.bat can't read the configuration file?

    I agree with you that if I can successfully playback content the license serve is setup successfully. Here is what I've tried and how I've set things up:
    I have my license server setup (its the Protected Streaming version).
    I'm using Adobe Media Server as my content/packaging server. I successfully served Vanilla PHLS sample streams to the sample Adobe Access player on iOS devices.
    I have configured the Adobe Media Server to point to the license server and certificates as per the documenation and this Adobe Dev article (http://www.adobe.com/devnet/adobe-media-server/articles/content-protection-using-phds-phls .html). Since I am using a trial version of Adobe Access my .der files are the same for transport and packaging.
    I am using the local key mode to remove one more variable (I have setup a remote key server as well).
    I have placed a copy of the 'vod-policy.pol' policy file from the reference license server resources directory in my Adobe Media Server 'creds' directory and used the relative path '..creds/vod-policy.pol' in the httpd.conf file.
    When I attempt to load the sample stream http://<mymediaserver>/hls-vod/sample2_1000kbps.f4v.m3u8 using the Adobe Access sample player on my iOS device I receive the following errors in the player:
    DRM error Major[3363] minor:[0] NSError:(null)]
    From my knowledge of working with the Adobe Access Objective C library to create a PhoneGap plugin it appears that a decrypted playlist is not being returned by the Adobe Media Server. Additionally, I can find no information in the Adobe Media Server or Adobe Access logs that pertain to my setup.
    I would love to have someone from Adobe speak to the problems I am having. I find the documentation to be hit and miss and most of my successful results during this proofing process have been from piecing together disparate pieces of information and trial and error. Information on using the Adobe Media Server with Adobe Access is limited to one Devnet article (above) and the help in Adobe Media Server that doesn't explain pathing to the license server or Java policy files in any detail.
    Colour me frustrated

  • I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect"

    I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect", which is Windows lingo for "missing package dependencies".  All the computers at my company with 2010 loaded seem to do OK.  When I do a Dependencies Walk I get missing Visual C debug dll's missing plus IEshims and wer which both have a whole tree of dependencies missing on my machine.  The Windows install is the same "Windows XP version 2002 Service Pack 3" on my PC and the working PC's. So I'm thinking I have to uninstall 2011 and go back to 2010.  Is this correct?  Those VC debug dll's were installed on the machines with 2010 in them but were not installed in mine.
    I've heard the advice to recompile the dll with debug turned off but I don't have access to the source code.
    Thanks in advance.

    u87 wrote:
    Thanks for the reply.  This at least tells me that going back to LV2010 is not likely to solve the problem.  The missing dll's are:
    MFC90D.dll
    MSVCR90D.dll
    IESHMS.dll
    WER.dll
    And, once again, IESHMS and WER have other dependencies.  So perhaps i need to install the Visual C++ development environment.
    IESHIMS.dll is an Internet Explorer DLL that gets usually delay loaded by shdocvw.dll. As delay load it can not cause DLL load errors but only runtime errors. Maybe your DLL has it as direct dependency but that is unlikely since it does not have a documented interface.
    WER.dll is Windows error reporting for Vista/Win7.
    MFC90D.dll is the Microsoft Foundation classes and MSVCR90D.dll is the MS C runtime library, both as debug variant.
    So all the DLLs you mention are actually MS DLLs! You haven't identified the DLL that you try to access in LabVIEW that causes these error messages. IESHIMS and WER are usually delay loaded by any component that needs it and should not likely be used by non MS code.
    What is the DLL you try to load into LabVIEW and by whom? Get the provider of that DLL to provide you a non Debug build of the DLL. Installing Visual C on all the machines just to make the DLL load is not a solution, besides that it is likely not legal since I doubt you have that many licenses.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • One of my dll's in my vi doesn't run with the error "application configuration is incorrect"

    I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect", which is Windows lingo for "missing package dependencies".  All the computers at my company with 2010 loaded seem to do OK.  When I do a Dependencies Walk I get missing Visual C debug dll's missing plus IEshims and wer which both have a whole tree of dependencies missing on my machine.  The Windows install is the same "Windows XP version 2002 Service Pack 3"  So I'm thinking I have to uninstall 2011 and go back to 2010.  Is this correct?  Those VC debug dll's were installed on the machines with 2010 in them but were not installed in mine.
    Thanks in advance.

    Hm,
    it seems that you might have more success in the LabVIEW forum here; this one is for LabWindows/CVI...

  • Error 1070023 Configured Disk volume does not exist.

    Hi
    I installed Essbase 11.1.1.2 in stand alone mode. When I am trying to start Sample.Basic, I am getting the below error
    Error 1002097 Unable to load database Basic.
    The App log showed the following error
    Error 1070023 Configured Disk volume does not exist.
    Please help..

    So everything works when the volume is set to E?
    If so, you might be able to use DISKVOLUMES E in the essbase.cfg file which sets a default (for BSO cubes, at least), but you shouldn't have to do that.
    The DISKVOLUMES documentation says that the volume that contains your ARBORPATH is the one used by default. Not completely sure I trust that it's up to date, and isn't now ESSBASEPATH or something else, but regardless, do those variable all look to be set correctly? To be honest, that's a longshot, as I'd be surprised if a missing / incorrect value there wouldn't cause bigger problems...

  • Good afternoon.I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninst

    What's error 1 in adobe photoshop elements configuration? I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninstall and reinstall. I have done this but the message continues to appear

    You haven't mentioned which version of PSE. If it is PSE 13, that requires a minimum of windows 7.

  • Error while creating the sales order with billing reference

    hi alll
    i am getting error while creating the sales order with billing reference.The line items are coming in grey.I am not able to change the items as well as the quantity field.Can u guide me
    cheers
    shalsa007........

    Dear SAP SD 007
    I can confidently tell that an enhancement or an user exit has been applied in your scenario
    You have to check that
    Normally when creating a sales order with respect or referring billing documents the qty will be in editable mode and it is standard problem
    Your people has solved the standard problem by enhancement
    Usually OR--LF-PGI----F2 (SAY THE QTY IS 25 UNITS)
    Now you are creating returns order with reference to F2 in the return order type Re there is a standard issue that user can edit the qty to 30 from the original 25
    To solve this only your people have used userexit
    Line items and qty greyed out means definately there is some enhancement or user exit applied
    You have to check that
    Regards
    Raja

  • Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

    Hi,
    I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
    I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
    I have followed the installation document & getting an error while configuring VMM for System Center 2012.
    error details from log file given below:
    01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
       at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
       at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
    01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
    01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
    01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
    01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item.  Setting rollback.
    01:12:24:SetProgressScreen: FinishMinorStep.
    01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
    I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
    An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    I have checked that the following services are running:
    1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent)  3)SC VM Manager Agent  4)  Windows management instrumentation .
    I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
    Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
    thanks.
    ====

    Have you installed AppController on the same machine with VMM?

Maybe you are looking for

  • ORA805.dll unable to access using TOAD

    Has anyone encountered this issue? Access violation in module ora805.dll using the TOAD software What was the solution to correct? Thanks

  • Reference field value disappears on the Receivables transaction line window

    Hi Everybody, I have below problem while creating the manual invoice from Receivables. when i am trying to utilize the reference field on the Receivables transaction line, so that it can be used to enter extra data for manual invoices. At the moment

  • Problem downloading .doc, .xls file using servlet

    i have a servlet which downloads the files to client(browser). It works file for .txt file but .doc, .xls files are opend but they contain garbage. plz letr me know if u know problem!!!!! -amit

  • Problems with the digital publishing tools

    I downloaded the digital publishing tools but got an error when trying the preview button. I followed the instructions from adobe on clearing the indesign prefs, turning the extension on and off with the extension manager, an now none of the digital

  • Database 11gR2  dbconsole job library

    I created a Refresh from Metal Link job with schedule. I saved the job and now wish to view the job library. I can't seem to find the job I created. Where do I go to find it in dbconsole.... Thanks, Bob