Error in creating create Consumer proxy:

Hi all ,
while creating create Consumer proxy: in SE80 ,by giving the URL of the webservice i am getitng a error which is
Exception occurred in communication framework:Error in HTTP Framework:404conn failedhttp, i am new to this SOA, please help me
Thanking you
Sridhar

Hi.
Can you tell us how did you solve it?? I´m getting the ( missing) error too.
Thanks in advance.

Similar Messages

Error while activating webservice-consumer-proxy

Hi,
I'm trying to generate a webservice-consumer-proxy from a Salesforce.com-WSDL-File. When trying to activate the proxy I receive an error-message from class CX_ESD_EXCEPTION stating "Beim Aktivieren des Proxys ist ein Fehler aufgetreten." (in english: "Error occured when activating the proxy"). The WSDL-File is SOAP-Version 1.1, Document/Literal.
Thank you very much in advance,
Olli
[SAP Consulting by mindsquare|http://mindsquare.de]

I have a similar issue and it says that the reason is one of the exception classes in XML in not derived from either cx_static_check or cx_dynamic_check.
Please let me know if anyone have ideas how to resolve this

Error while creating consumer proxy

Hi all,
I am trying to consume WSDL using consumer proxy, but facing an error.
Attribute "transport" in <soapbind:binding> has incorrect value.
The transport attribute in WSDL has below value:
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>
I am an ABAP person, do not have exposure to PI.
Regards,
Sneha Nikam

Hi Sneha,
The message in the wsdl is the structure that will used by the proxy (in sproxy) to create data dictionary entries. Without any message, it is not possible to create a consumer proxy. Also, there are data types that are not supported in PI 7.1, see this link Supported XML Schema and WSDL (SAP NW PI 7.1) Excel List
Please check the WSDL.
Hope this helps,
Mark

How to create Consumer Proxy in SAP ME SDK?

Hi,
i'm working with a ME 6.0 release and since i need to set some settings for a webservice and that is only possible via a consumer proxy, my question would be: How do i create a consumer proxy for an external webservice that i want to call in the SDK?
I have no problems creating webservices in ME SDK but i don't know how to transform them so that they are consumer proxies. Can anyone point me in the right direction?
Regards,
David Strohmayer

Please do check the thread mentioned below if it is of any help.
Re: SOAP to PROXY (Synchronous)
Rg,
Harshit

Consumer Proxy Generation-HTTP Framework Error

Hello All,
I tried to create a consumer proxy for an external WSDL.
However i am being faced with the following error
"Exception occurred in communication framework:Error in HTTP Framework:500SSL Peer Certificate Untrusted <WSDL link>
Exception of class CX_PROXY_GEN_ERROR".
Any help would be highly appreciated.

That helps, thanks.
But my error is different. How can I make sure the cause is the same?
The error I get is the following:
Proxy generation terminated: WSDL error (<extension> not supported)
Diagnosis
The language element
"<extension>"
was used in the WSDL document.
This language element is not supported by ABAP proxy generation.
Thanks again.
Leonardo

Error Creatu00EDng Consumer Proxy

Hi,
I am currently trying to create a consumer proxy from an simple free web service. The used WSDL can be downloaded there:
[http://www.thomas-bayer.com/axis2/services/BLZService?wsdl]
After doing the diffrent steps of the wizard ( "Select Source", "Enter Package/Request".....) I got following errors in transaction SE80:
Proxy-Generierung: Fehler aufgetreten
Exception occured in library handler
Not implemented
Could anyone help? Perhaps you can use the same web service and try to create an consumer proxy.
How can I see, what exception occurred in the library handler?
Thank You and Best Regards, Eddy

Hello,
this WS worked for me:
http://www.webservicex.net/airport.asmx?wsdl
Bye
Gabriel P.-

Cosuming web service using consumer proxy - not getting the output

Hello All,
I am not getting the consumer proxy output structue filled though the web service is successfully executed. I did the following steps.
1. Created a webservice form RFC BAPISDORDER_GETDETAILEDLIST
2. Created a consumer proxy for the above created WSDL document.
3. Tested the service by executing the proxy directly by feeding the input in the XML (sales document and partner view). it is working fine
4. Created a program to access the consumer proxy by passing the input(same input as per XML). I am not getting the output in the proxy output structure ( but I can see the RFC is successfully executed and having the right values in the debugging mode).
Is this the issue is due to the date fields (XML cannot consider a blank date )?
Please note: the partner output table parameter in the bapi (output I am looking for ) is not having any date fields.
Please help me to sort out this issue.
Thanks,
Gopi

Hi Gopi,
From your description, I assume you used the SE37 transaction's menu option Utilities -> More Utilities -> Create Web Service -> From the Function Module, to expose the BAPI concerned as a Web Service.
If this is the case, then it is possible that you are falling foul of your SAP User ID not having the necessary Remote Function Call authorization to execute the BAPI.
A prerequisite for successfully calling an RFC-enabled Function Module (which is what a BAPI is) is that the User ID used to call the function module must have the required RFC authorization (Authorization Object S_RFC). For example, when calling function module BAPI_CUSTOMER_GET_ROOT, if the User ID lacks the requisite authorization in the target system, the following error message will be received by the Consuming application:
User <User ID> has no RFC authorization for function group V02HBAPI.
Notice, as you can see from the above message, RFC execution authorization is implemented at the Function Group level, not at the Function Module level. In othere words, granting a user the authorization to a function group (authorization object S_RFC) enables the user to execute all RFC-enabled function modules contained within that function group.
I am guessing the BAPI works for you in debug mode because you are not calling the BAPI remotely.
Let me know if this helps.
Best Regards,
Andy.

ABAP consumer proxy generation for xMII WSDL's

Hi friends,
I have a question related to generation of consumer proxies in ECC Box. I am trying to create a consumer proxy for xMII WSDL's using URL method. For the first WSDL, I was able to create a service consumer proxy successfullly. It created with the name "XacuteWSSoap". Now, when I am trying to create another consumer proxy, I am always getting the error saying the proxy object already exists. Then, I went to WSDL and compared all of them, they all are having port type as XacuteWSSoap. I believe this is the reason why, it is not allowing me to create a new proxy object for the second WSDL. Does any one know how to overcome this problem?
Thanks in advance,
Regards,
Adithya K

Hi Gaurav,
     I tried both of the ways. Here are the results.
     If I delete the proxy and create with new prefix its still the same issue I am having.
     And changing the port type seems to work, it allowed me to create a new proxy object. But, again there are few structures which are getting regenerated and overwriting the existing values. Here is the sample WSDL: If you see closely, the complex type "InputParams", Port type name "XacuteWSSoap", Input message name "s0:XacuteSoapIn", Output message name "s0:XacuteSoapOut" are the things which are creating problem for me. If I rename all the above things that I mentioned like port type, input message, etc. Its working for me. But, I dont think this is the correct way of developing these. So, I want to know whether there is any problem with SAP generating the things or I am doing any wrong.
<?xml version="1.0" encoding="UTF-8" ?>
- <definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:s0="http://www.sap.com/xMII" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" targetNamespace="http://www.sap.com/xMII">
- 
- <types>
- <s:schema elementFormDefault="qualified" targetNamespace="http://www.sap.com/xMII">
- <s:complexType name="InputParams">
- <s:sequence id="InputSequence">
<s:element maxOccurs="1" minOccurs="0" name="Mode_Read" type="s:string" />
<s:element maxOccurs="1" minOccurs="0" name="Mode_Write" type="s:string" />
<s:element maxOccurs="1" minOccurs="0" name="Server" type="s:string" />
<s:element maxOccurs="1" minOccurs="0" name="TagGUID" type="s:string" />
<s:element maxOccurs="1" minOccurs="0" name="TagInput" type="s:string" />
</s:sequence>
</s:complexType>
- <s:element name="XacuteRequest">
- <s:complexType>
- <s:sequence>
<s:element maxOccurs="1" minOccurs="0" name="LoginName" type="s:string" />
<s:element maxOccurs="1" minOccurs="0" name="LoginPassword" type="s:string" />
<s:element maxOccurs="1" minOccurs="0" name="InputParams" type="s0:InputParams" />
</s:sequence>
</s:complexType>
</s:element>
- <s:complexType name="Rowset">
- <s:sequence>
<s:element maxOccurs="unbounded" minOccurs="0" name="Row" type="s0:Row" />
</s:sequence>
<s:attribute name="Message" type="s:string" />
</s:complexType>
- <s:complexType name="Row">
- <s:sequence id="RowSequence">
<s:any maxOccurs="132" minOccurs="1" type="s:string" />
</s:sequence>
</s:complexType>
- <s:element name="XacuteResponse">
- <s:complexType>
- <s:sequence>
<s:element maxOccurs="1" minOccurs="0" name="Rowset" type="s0:Rowset" />
</s:sequence>
</s:complexType>
</s:element>
</s:schema>
</types>
- 
- <message name="XacuteSoapIn">
<part element="s0:XacuteRequest" name="parameters" />
</message>
- <message name="XacuteSoapOut">
<part element="s0:XacuteResponse" name="parameters" />
</message>
- 
- <portType name="XacuteWSSoap">
- <operation name="Xacute">
<input message="s0:XacuteSoapIn" />
<output message="s0:XacuteSoapOut" />
</operation>
</portType>
- 
- <binding name="XacuteWSSoap" type="s0:XacuteWSSoap">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
- <operation name="Xacute">
<soap:operation soapAction="http://www.sap.com/xMII" style="document" />
- <input>
<soap:body use="literal" />
</input>
- <output>
<soap:body use="literal" />
</output>
</operation>
</binding>
- 
- <service name="XacuteWS">
- <port binding="s0:XacuteWSSoap" name="XacuteWSSoap">
<soap:address location="http://abc.dx.com:50000/XMII/SOAPRunner/Test%20-%20DoNotDelete/OPC/Trx-OPCTag_Prototype" />
</port>
</service>
</definitions>
Appreciate if you can help.
Thanks,
Adithya K

ABAP consumer proxy generation for xMII WSDL

Hi friends,
I have a question related to generation of consumer proxies in ECC Box. I am trying to create a consumer proxy for xMII WSDL's using URL method. For the first WSDL, I was able to create a service consumer proxy successfullly. It created with the name "XacuteWSSoap". Now, when I am trying to create another consumer proxy, I am always getting the error saying the proxy object already exists. Then, I went to WSDL and compared all of them, they all are having port type as XacuteWSSoap. I believe this is the reason why, it is not allowing me to create a new proxy object for the second WSDL. Does any one know how to overcome this problem?
Thanks in advance,
Regards,
Adithya K

Hi Friends,
I would appreciate if anyone can help me with this issue.
Thanks,
Adithya K

Consumer Proxy changes in Logical Port do not work

Hi all,
i have created a consumer proxy on ce 7.11 and i want to change the url of the endpoint on my production system. as i am using nwdi i can't change the url in the wsdl.
when i change the endpoint url in the single service configuration, the changes are not used by the consumer proxy.
could anybody tell me if he experienced a similiar problem and provide a solution to me ?
br,
martin

I have this same problem with my Satellite C55-B. Headphone jack and the USB port right next to it both quit working apparently at the same time. This laptop is only a year old and I have tried loading this driver for the audio jack with no luck.
Realtek Audio Driver File: tc40213600i.exe DOWNLOAD Version: 6.0.1.7195 Posted Date: 2014-04-07 (recommended by moderator Peter in another thread)
So what am I dealing with here? A hardware issue or a software issue? Thank you.

Error while creating logical port for Consumer Proxy in SOAMANGER

Hi,
While creating logical port for my consumer proxy in SOAMANGER, I am getting the error shown below
SRT Framework exception: HTTP: Current user does not have the required authorization to access the HTTP destination
I have searched in the forums but none of the answers helped me.
I have specifed my PI user ID and password and the user has the followwing roles assigned to it.
SAP_BC_WEBSERVICE_SERVICE_USER
SAP_BC_WEBSERVICE_ADMIN_TEC
SAP_BC_WEBSERVICE_CONSUMER
SAP_BC_WEBSERVICE_ADMIN
Current user in the error message refers to the PI user that i have specified or the user with which i have logged in the backend ABAP system?
Please help me reslove this issue.
Thanks and regards
Sreehari Nambiar

Hi,
Please add the following roles as well.
SAP_BC_WEBSERVICE_ADMIN_BIZ
SAP_BC_WEBSERVICE_DEBUGGER
SAP_BC_WEBSERVICE_OBSERVER
Also make sure that you are doing the role comparison after adding all SAP* roles in your profile.
Let me know if this works?
Thanks,
Sridhar

Error While creating ABAP Consumer Service using Provider service WSDL.

HI Friends,
We are trying to consume service from Provider service.
Provider service is developed on CE 7.11-NWDS7.11 and published in CE7.11 registry.(used outside in method and implemented in EJB/Deployed/Published/tested) sounds good.
We are trying to consume in ABAP (ECC 6.0 EHP4 SPS16).
when we are trying to create service consumer from se80 selected url : provider WSDL picked up from from Service registry.
At the end of wizard its throwing error.
error description.
Message Policy in Name space "http://schemas.xmlsoap.org/ws/2004/09/policy " is not unique in WSDL.
Unable to generate proxy.
Any pointers to resolve this.
Regards
Chandra

I would suggest to test the service in XML Spy using the same WSDL or the URL of the WSDL. If XML Zpy throws the same error, there could be some problem in the provider service generation itself..!!
VJ

Error while creating a deployable proxy for a URL in NWDS

Hi ,
There is a requirement for calling a webservice in the .NET platform from JAVA using NWDS. The webservice of the server is pinged using the URL of the webservice. when the URL is passed in the WS navigator of CRD ( that is Development Server) , the response is retreived successfully . The version of NWDS is 7.0.23.
we are facing problem when we are trying to create a Deployable proxy in NWDS by using the following steps :
1) Create a Development Component
2) Select the Deployable Proxy
3) Create the Client Proxy Defintion of the created DC
At step 3 , when we giving the url or WSDL link like "http:// www3.authoring.syngenta/newswebservice.asmx?WSDL" (this is just for example) , it is showing as "Invalid wsdl or wsdl not found " . so that we are not able to procees further.
When we are trying to create proxy the for the WSDL link like " http:// www.authoring.syngenta/newswebservice.asmx?WSDL" , we are able to create successfully.
can anyone suggest why we are able to create the proxy for the URL "http:// www.authoring.syngenta/newswebservice.asmx?WSDL" and not for the other URL.
Any pointers or suggestions are very helpful.
Thanks and Regards,
Sreedevi

Late response I know, but I have solved a similar problem recently and thought I would share.
Firstly, the problem is not with the namespace. The "Namespace ..." part is just stating the namespace the "Incorrect Value" has. So this error is complaining about the value "Unknown" - which isn't very helpful.
It appears the SAP SE80 importer does not like elements like the following because it can't understand <s:element ref="s:schema" />. It appears this is a common thing to be included in .NET generated WSDLs.
<s:element minOccurs="0" maxOccurs="1" name="GetCursDynamicResult">      <s:complexType>          <s:sequence>               <s:element ref="s:schema" />               <s:any />          </s:sequence>     </s:complexType></s:element>
SAP will also not like this example as it does not support mixed content (see: http://www.w3schools.com/schema/schema_complex_mixed.asp)
<s:element minOccurs="0" maxOccurs="1" name="SaldoXMLResult">
     <s:complexType mixed="true">
          <s:sequence>
               <s:any />
          </s:sequence>
     </s:complexType>
</s:element>
You can "Fix" the problem in both cases by removing the offending text in a local copy of the WSDL file so remove line 4 in the first example and change line 2 in the second to <s:complexType> the proxy can then be generated. No idea if the resulting service will be fully operational though!

Validation error while creating Web Service Proxy.

Hi,
I'm trying to create Web Service Proxy. But I'm stuck with a Validation error
model error: type
+"{http://xmlns.oracle.com/2001/XMLSchema/DOM}+
+org.w3c.dom.Document" not found.+
I'm using "Create Web Service Proxy" wizard. There are 6 steps in creating proxy through JDev. wizard.
First step itself displaying the above validation error when I click on "Next" button.
Few points
We have created web service using "oracle.j2ee.ws.StatelessJavaRpcWebService" servlet
Thanks in advance.
-Sukumar

Hi,
It might be that the .net service which you have is not WS-I compliant. Can you first run WS-I Analyzer on the wsdl to see it the test passes.
Thanks,
Vishal

"An error occurred while creating the system proxy" after upgrade to 11.2

Hi, I have just moved from 11.1 release to 11.2 release but this fault is preventing me from using 11.2
If i try to access System Administration Panels like "Users" or "SMF Services" I get two error messages and can not proceed.
If I roll back to the previous BE, (11.1) it all works fine).
An error occurred while creating the system proxy
Navigation Failed. The first component of the address, "vp" is not a valid control.
The error is mentioned here https://www.mail-archive.com/[email protected]/msg09791.html but I can not see the link content and it was a long time ago.
Not sure if it is relevant, but i am behing a pfsense/squid proxy - but have this server IP excluded/set to bypass the proxy.
Also, not sure if it is relevant but here is the output from the following:
nas@nas:~$ svcprop svc:/application/pkg/system-repository:default | grep _proxy
config/http_proxy astring ""
config/https_proxy astring ""
Any help appreciated.

Ensure that the "solaris-desktop" package group is correctly installed :
# pkg info solaris-desktop
# for i in `pkg contents -m solaris-desktop | grep depend | awk '{print $2}' | awk -F= '{print $2}'`; do pkg list $i; done
Ensure that svc:/system/rad:local is online :
# svcs svc:/system/rad:local
Check for any errors in rad service :
# svcs -Lv svc:/system/rad:local
Once the above is checked, does the error persists after a reboot ?

Error in creating create Consumer proxy:

Similar Messages

Maybe you are looking for