Error in Demo-Appl. 'Project Status'

Reporting an error:
Project Status Demo. When I try to add a new task to a project, I get:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06512: at "CBOURBOU.PROJSTAT_TASKS_BIU", line 4 ORA-04088: error during execution of trigger 'CBOURBOU.PROJSTAT_TASKS_BIU'
Regards
Tino

i'm pretty sure that the cause of your error is that your userid is longer than 30 characters when you're logged in and trying to create a new task. all the projstat_tasks_biu trigger does is set the last_update_user, last_update_date, and task_id values for projstat_task table. last_update_user is defined in that projstat_tasks table as a varchar2(30), so you'll get that error for sure with a long userid when the trigger does a ":new.last_update_user := v('USER');". try either modifying your table or creating tasks while logged in with a shorter userid and let us know if you still have issues.
regards,
raj

Similar Messages

  • Set Project status error Activity 000005012744 0010 No changes possible bec

    Hi All,
    I am getting this error on RPM "Activity 000005012742 0010: No changes possible because of status CLSD"  after setting project status to Complete Technically or Closed. I could not change the status to any other status when set to these two statuses.
    I tried looking for custom implementation in the BADIs but unfortunately breakpoint is not triggered on any of the BADIs. Is this a configuration issue?
    Thanks and I hope someone can help me.
    Renz
    Edited by: Jorenz.Llanes on Jul 5, 2011 8:43 AM

    I found out that the activity of a project should be released first before setting a status to the Project level after which is applied to the project hierarchy.

  • Project Status Report - cProjects 4.0 - Run time error

    Under Basic Settings, I go to 'Forms for Printing and for Project Status Reports'. Here, under 'Create PDF-Based Forms', I select the form 'DPR_STATUS_REPORT_AIF' and Activate it. I then get to 'Activate Forms per project type'.I get to 'New Entries' and add 'DPR_STATUS_REPORT_AIF' and also set the 'Active' and 'Status Rpt' checked.
    When I get to cProjects front end, I see the 'Project Status Report' template under the 'Status Report' tab. However, when I click on the 'Preview' button, I get to see a dump.
    "The following error text was processed in the system SRP : WebDynpro Exception: SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP send returned with status code(100.101)"
    Can someone please suggest how to get something useful at the click of the preview button?
    Thanks.

    Hi,
    Yes your basis team should tell you more about this. ADS Credential needs to be installed on the java stack of your cProjects Server. For this you will have to send a message to SAP requesting for the ADS Credential. You will then receive a credential file with its password.
    However not all servers support ADS. There is a list of server names that support ADS. You can get the server name on which cProjects is installed from your basis team and I shall let you know if it is supported or not. You can also have a look at in the PAM (Product availability Matrix) for SAP NetWeaver 2004s - Additional Components at http://service.sap.com/pam
    Regards,
    Reema.
    <i>Pl award all useful answers.</i>

  • HT201317 When I go to log onto iCloud using my Windows 7 and it asks for my login information, I get the error saying my Apple account is valid but not an iCloud account. How do I get an iCloud account? Thank you

    When I go to log onto iCloud using my Windows 7 and it asks for my login information, I get the error saying my Apple ID is valid but not an iCloud account. How do I get an iCloud account?
    I don't have any apple products personally, this is for work to use Photo Stream so when Superintendents & Project Managers take pictures of their construction site, I am able to have those images immediately.
    Thank you

    You can not create an iCloud account using a PC, you will need an Apple product. Once the account exists you can logon to it from a PC.

  • CUA: One or more errors occurred while checking the status of Windows Firewall on the cluster nodes

    Cluster with 2 hosts 2012 R2
    Scheduled CAU fails with:
    CAU run {4EFE116C-AB49-456D-8EED-F7EDC764DA49} on cluster Cluster1 failed. Error Message:One or more errors occurred while checking the status of Windows Firewall on the cluster nodes. Review the errors for more information on how to resolve the problems.
    Error Code:-2146233088 Stack:   at MS.Internal.ClusterAwareUpdating.Util.<CheckFirewallsAsync>d__3a.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.ClusterAwareUpdating.Commands.InvokeCauRunCommand.<_ProcessCluster>d__78.MoveNext()
    If I run CAU "Analyze Readiness" ALL comes as PASS
    If I run CUA by hand on same hosts with NO change to the system (not even reboot) it finishes OK
    Anybody any ideas?
    Thanks
    Seb

    Hi,
    In some case if you disabled the connection in Windows firewall inbound of
     "Cluster aware updating" service it will can’t use the CAU.
    More information:
    Starting with Cluster-Aware Updating: Self-Updating
    http://blogs.technet.com/b/filecab/archive/2012/05/17/starting-with-cluster-aware-updating-self-updating.aspx
    What is Cluster Aware Updating in Windows Server 2012? (Part 1)
    http://blogs.technet.com/b/mspfe/archive/2013/02/06/what-is-cluster-aware-updating-in-windows-server-2012.aspx
    Cluster-Aware Updating Overview
    http://technet.microsoft.com/en-us/library/hh831694.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Getting error message "cannot prepare project for publishing (-50) -- and it wont publish my project. What's up?!

    getting error message "cannot prepare project for publishing (-50)" and, subsequently, it won't publish the bloody thing. I have publsihed many videos previous to this one so I have no idea waht is going on.
    So, my question is -- WHAT IS GOING ON?!!

    Hi
    See if this might help
    Error -50
    Error -50   paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    What this means in Your situation is above me.
    • free space on internal boot hard disk? How much ?
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    The "com.apple.iMovie.plist" file
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Yours Bengt W

  • Cannot save comments in Project Status Report

    Hi,
    I am trying to save comments in Project status report by typing in the comments box and then pressing the save button. The pdf file gets saved successfully, but when I open the saved pdf file the comments I typed before are not there(not saved).
    Please note that I am using the standard project status report.
    Could anybody guide me on this?
    Thanks
    Edited by: hemant vaidya on May 26, 2008 5:26 AM

    Hello,
    is there any error text given by cProjects?
    Have you had a look on the ADS side's logfiles?
    Are you using the right credentials?
    Maybe this could be a good point to start. Otherwise your description is not detailed enough to go on...
    Greetings, Max

  • Project Status Report - cProjects 4.0

    Hi all,
    I am using cProjects 4.0.
    After selecting the PDF Print form DPR_STATUS_REPORT_AIF for the project type and marking 'Active' and 'Status' report checkboxes, when I go to create Status reports, I can see the template "Project Status Report". However, when I click on the "Preview" button, I get a runtime error saying
    "The following error text was processed in the system DRP : WebDynpro Exception: SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP server replied with status code 500(100.101). "
    Can someone suggest please?

    Hi,
    Are you able to open any other pdf forms in cProjects. for eg. approval document?
    I guess you need to get the exact location of error.
    After the system gives a dump, run transaction ST22 and  get the program/function name where the error is actaully occuring.
    Regards,
    Reema.
    PS. pl. award points to all useful answers.

  • Cannot load project status report in cprojects on portal

    Hi,
    I have checked all the FP_* adobe test programs and my ADS is working fine. I did test my form in ECC transaction code sfp and the form loads properly.
    But, when I try to load the project status report(same form) through portal (cprojects)it is giving me connection timeout error.
    Could somebody guide me?
    Thanks.

    Hello,
    there can be several reasons why the Statusreport does not come up
    a) ACF component is not installed correctly
    Check as described in note [766191|https://service.sap.com/sap/support/notes/766191] if the  ACF is installed correctly
    b) ADS is not set up correctly
    Check as described in note [944221|https://service.sap.com/sap/support/notes/944221] if the ADS is installed correctly
    c) cProjects config for the status reports is not set up correctly
    Check as described in note [978997|https://service.sap.com/sap/support/notes/978997] if your system is set up according to the configuration guide
    Best Regards, Andrea
    Edited by: Andrea Langlotz on Jun 11, 2008 8:55 AM

  • Cannot see project status report pdf inside cprojects using Firefox

    Hi,
    I am using firefox software to view project status report in cprojects. It shows me blank.
    But if I view Approval document, the pdf shows correct in the browser.
    As you might be aware,Please note these pdf reports display inside the webpage area,so please donot reply with solutions of opening pdf in separate browser window etc.
    Please help

    Hi,
    Are you able to open any other pdf forms in cProjects. for eg. approval document?
    I guess you need to get the exact location of error.
    After the system gives a dump, run transaction ST22 and  get the program/function name where the error is actaully occuring.
    Regards,
    Reema.
    PS. pl. award points to all useful answers.

  • CProjects Project status report not generated

    Hi
    I am facing problem of getting Project status report for a project in cProjects 4.0
    I am at client side and accessing the IDES ECC6.Her I am trying for getting Project status report for the project created.
    The error I am getting is :
    "WebDynpro Exception: ADS: Request start time: Thu Aug 21 16:53:27 GMT+03:00 2008(200,101). "
    In customizing for cProjects I have used the std. form available for the same, activated the same for the project type and when tried to get the report I got the above mentioned error.
    Then in se38 I executed the programme FP_TEST_IA_01 the result was :
    ADS: Request start time: Thu Aug 21 17:23:42 GMT+03:00 2008(200,101)
    Also I have activated the following services
    SICF->Services->default_host->sap->bc->fp and fpads, both are active.
    But still I am not getting project status report from cProjects.
    Please guide me what else should I do to get the project status report?
    Thanks and Regards,
    Niraj Sikligar

    Hi Reema,
    Its great to hear from you.
    I have run the report : FP_PDF_TEST_00
    Out put is :
    Version Information:                705.20060620101936.310918
    What does that mean ?
    Secondly,
    I have checked RFC destination for ADS the results were as shown below:
    On Technical Settings tab page :
    target host: ides
    Path prefix: /AdobeDocumentServices/Config?style=rpc
    Is this OK?
    Is there anything else to be done?
    Regards,
    Niraj Sikligar

  • Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Status 500

    I get the following error when trying to connect to my BlazeDS Java server from Flex application. Flex application is on localhost:80, blazeDS on tomcat localhost:8080. Please help!
    createUser();faultHandler():(mx.messaging.messages::ErrorMessage)#0
      body = (Object)#1
      clientId = (null)
      correlationId = "9FFDEBE8-EAD0-F3D9-8E9B-E3D7D7F5AE79"
      destination = ""
      extendedData = (null)
      faultCode = "Client.Error.MessageSend"
      faultDetail = "Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Status 500: url: 'http://77.93.202.150:8080/QuizDS/messagebroker/amf'"
      faultString = "Send failed"
      headers = (Object)#2
      messageId = "98F54E19-7B0D-DCB9-4B86-E3D7D84E484F"
      rootCause = (mx.messaging.events::ChannelFaultEvent)#3
        bubbles = false
        cancelable = false
        channel = (mx.messaging.channels::AMFChannel)#4
          authenticated = false
          channelSets = (Array)#5
          connected = false
          connectTimeout = -1
          enableSmallMessages = true
          endpoint = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
          failoverURIs = (Array)#6
          id = (null)
          mpiEnabled = false
          netConnection = (flash.net::NetConnection)#7
            client = (mx.messaging.channels::AMFChannel)#4
            connected = false
            maxPeerConnections = 8
            objectEncoding = 3
            proxyType = "none"
            uri = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
          piggybackingEnabled = false
          polling = false
          pollingEnabled = true
          pollingInterval = 3000
          protocol = "http"
          reconnecting = false
          recordMessageSizes = false
          recordMessageTimes = false
          requestTimeout = -1
          uri = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
          url = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
          useSmallMessages = false
        channelId = (null)
        connected = false
        currentTarget = (mx.messaging.channels::AMFChannel)#4
        eventPhase = 2
        faultCode = "Channel.Connect.Failed"
        faultDetail = "NetConnection.Call.Failed: HTTP: Status 500: url: 'http://77.93.202.150:8080/QuizDS/messagebroker/amf'"
        faultString = "error"
        reconnecting = false
        rejected = false
        rootCause = (Object)#8
          code = "NetConnection.Call.Failed"
          description = "HTTP: Status 500"
          details = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
          level = "error"
        target = (mx.messaging.channels::AMFChannel)#4
        type = "channelFault"
      timestamp = 0
      timeToLive = 0

    halodev:
    I made a CF/Flex site based on the Flexstore sample app,
    using a database instead of XML as the data source; in case you
    want to see it:
    http://www.timos.com/dg/flex/DilemmaGames.html
    At first I had troubles similar to what you describe;
    initially, part of the problem was that my hosting company had not
    yet upgraded to CF 7.02. One other thing I had to correct: when you
    upload to your server, upload the entire ‘bin’ (or
    whatever your output folder is) minus the debug SWF.
    If it would help with other issues, contact me and I will be
    glad to make my project code available to you. Good luck.
    Carlos
    [email protected]

  • In Encore I get an error in the check project window of "can't execute end action because of final chapter marker"

    I have imported a project to Encore and while it worked the first time, this time I get an error in the check project winder of can't execute chapter 2 end action because of final end marker?  I have two different sections that have buttons on the menu.  When you get to the end of the first sequence I need it to go back to the menu and it is saying that it can't because of the end action on the final marker.

    The 'unable to locate' message means that you don't have those music files on that computer, or that they are not where iTunes is expecting them to be. How did you get the entries for those tracks in your new computer's iTunes ?
    If you still have your old computer then you can try copying them over again : http://support.apple.com/kb/HT4527
    You may also be able to re-download them from the store (checking for available downloads only checks for items that have not yet been downloaded, not for past purchases) via the Purchased link under Quick Links on the right-hand side of the iTunes store home page (re-downloading music isn't possible in all countries). You may need to delete them form your library first (where you are getting the 'unable to locate' message), otherwise iTunes will assume that you still have them somewhere and won't let you re-download them.
    Re-downloading : http://support.apple.com/kb/HT2519

  • Function Module to set project status in CJ02.

    Dear Team,
    Is there any Function Module or BAPI to set project status in CJ02.
    Please Help.
    Thanks in advance,
    Sai

    Thanks a lot.
    This will serve half of my pupose.
    I am looking for setting status of WBS element of aproject definition in CJ02.
    Do we have any BAPI or FM for the same.
    Actually My purpose is to pool the error log as recording a BDC while closing the status of a WBS element.
    Thanks in advance.

  • Unable to commit the project status change

    Dear Experts,
    I am developing a utility program to change the status of multiple projects at once.
    I am changing the status of Phase, task, check list,check list item and Project status from
    Create to Release, release to Complete and to Work Effor Complete.With respective status change BAPIS.
    when ever the projects is not able to change the status success fully due to validations
    such as person respondsble not mainted or any other basic data is missing,
    We are not committing the changes if every thing goes fine we are commiting with BAPI: BAPI_CPROJECTS_COMMIT_WORK
    but when we commit with this it still retaining the previous project status in LUW and trying to commit previous project too.
    and commit is getting failed.
    I am not able to roll back or free the project with BAPI:BAPI_CPROJECTS_ROLLBACK_WORK and BAPI_BUS2172_FREE
    BAPI_CPROJECTS_ROLLBACK_WORK: when iam trying to use this BAPI it is going to short dump
    BAPI_BUS2172_FREE:  It is returing error saying unable to free the project.
    Could you please tell how to roll back the changes to the project or how to commit only success full projects (Project with out any errors in status change.)
    Kindly do the needful
    Thanking you.
    -ravi

    Program flow
    Loop at It_Project
    *Status Change for Check List
    CALL FUNCTION 'BAPI_BUS2176_SET_STATUS'
        EXPORTING
          checklist_guid                = p_guid
      IV_STATUS_PROFILE             =
         is_business_transaction       = lv_bus_trans
         TABLES
             return                    =  t_return.
    *Status Change for task
      CALL FUNCTION 'BAPI_BUS2175_SET_STATUS'
        EXPORTING
          task_guid               = p_guid
          is_business_transaction = lv_bus_trans
        TABLES
          return                  = t_return.
    *Status Change for project
    CALL FUNCTION 'BAPI_BUS2172_SET_STATUS'
          EXPORTING
            project_definition_guid = p_guid
            is_business_transaction = lv_bus_trans
          TABLES
            return                  = t_return.
    If there is a sucess in changing the status.
    CALL FUNCTION 'BAPI_CPROJECTS_COMMIT_WORK'
        TABLES
          return = t_creturn.
    Else.
        CALL FUNCTION 'BAPI_CPROJECTS_ROLLBACK_WORK'
          TABLES
            return = t_rreturn.
    Endif.
    Endloop.
    In the above code when we are executing  BAPI_CPROJECTS_ROLLBACK_WORK is going for dump.
    If we simply commit with  BAPI_CPROJECTS_COMMIT_WORK for all the projects then if any project
    commits with error same error is re produced for all the following projectsid (unable to destroy the LUW).
    and in CRM we can't use 'BAPI_TRANSACTION_ROLLBACK'.

Maybe you are looking for