Error in field symbol
Hi all,
i'm converting a field symbol table to internat table, where field symbol table structure is defined at runtime. for that i'm using
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = ifc1
importing
ep_table = dy_table.
assign dy_table->* to <dyn_table>.
create data dy_line like line of <dyn_table>.
assign dy_line->* to <dyn_wa>.
LOOP AT <dyn_table> ASSIGNING <dyn_wa>.
MOVE-CORRESPONDING <dyn_wa> TO dy_line.
INSERT dy_line INTO TABLE dy_table.
endloop.
where
data: dy_table type ref to data,
dy_line type ref to data,
But in execution time it show a error that dy_table is not a internal table.
pls give me ur suggestions.
Hi Ravish,
pls find yhe code, it;s throwing a error that dyn_table is not a internal table.
TABLES : SFLIGHT.
type-pools : abap.
field-symbols: <dyn_table> type standard table ,
<dyn_wa>,
<dyn_field>.
data: dy_table type ref to data,
dy_line type ref to data,
xfc type lvc_s_fcat,
ifc type lvc_t_fcat,
IFC1 TYPE LVC_T_FCAT.
selection-screen begin of block b1 with frame.
parameters: p_table(30) type c default 'SFLIGHT'.
*FIELD-SYMBOLS <F> TYPE table p_table.
data : field(10) type c.
SELECT-OPTIONS : P_FIELD FOR field.
selection-screen end of block b1.
start-of-selection.
perform get_structure.
perform get_selected_field.
perform create_dynamic_itab.
perform get_data.
perform write_out.
form get_structure.
data : idetails type abap_compdescr_tab,
xdetails type abap_compdescr.
data : ref_table_des type ref to cl_abap_structdescr.
ref_table_des ?=
cl_abap_typedescr=>describe_by_name( p_table ).
idetails[] = ref_table_des->components[].
loop at idetails into xdetails.
clear xfc.
xfc-fieldname = xdetails-name .
xfc-datatype = xdetails-type_kind.
xfc-inttype = xdetails-type_kind.
xfc-intlen = xdetails-length.
xfc-decimals = xdetails-decimals.
append xfc to ifc.
endloop.
endform.
form get_selected_field.
data: wa like line of ifc.
loop at ifc into wa.
if wa-fieldname in p_field.
append wa to ifc1.
endif.
sy-index = sy-index + 1.
endloop.
if ifc1 is initial .
MESSAGE e000 WITH 'This field is not available in table'.
endif.
endform.
form create_dynamic_itab.
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = ifc1
importing
ep_table = dy_table.
assign dy_table->* to <dyn_table>.
create data dy_line like line of <dyn_table>.
assign dy_line->* to <dyn_wa>.
endform.
form get_data.
SELECT * INTO CORRESPONDING FIELDS OF TABLE <dyn_table>
FROM (p_table) UP TO 20 ROWS.
endform.
form write_out.
Write out data from table.
loop at <dyn_table> into <dyn_wa>.
do.
assign component sy-index
of structure <dyn_wa> to <dyn_field>.
if sy-subrc <> 0.
exit.
endif.
if sy-index = 1.
write:/ <dyn_field>.
else.
write: <dyn_field>.
endif.
enddo.
code for convert field symbol internal table to internal table.
LOOP AT <dyn_table> ASSIGNING <dyn_wa>.
MOVE-CORRESPONDING <dyn_wa> TO dy_line.
INSERT dy_line INTO TABLE dy_table. <----
Error point
endloop.
endform.
Similar Messages
-
In getting error in field symbols
your attempted to assign a field to a type filed symbols but the field dose not have the required type.
iam getting runtimes error like this what should i do for this.
regards,
sivakumarHi,
Do not assign any particular data type to your field symbol definition.
field-symbols: <fs> type any.
assign p_matnr to <fs>.
assign sy-datum to <fs>.
regards
Subramanian -
Error in Field symbol assignment
What is wrong in following code ???
At line --> (Bold) I am gettin sy-subrc 4.
field-symbols: <F> type any,
<FSVALUE> type any.
SPLIT P_QUOTATION_TEXT-TEXT_LINE AT CRLF INTO TABLE I_SPLIT.
IF NOT I_SPLIT[] IS INITIAL.
LOOP AT I_SPLIT ASSIGNING <F>.
--> ASSIGN COMPONENT SY-TABIX OF STRUCTURE <F> TO <FSVALUE>.
IF SY-SUBRC = 0.
WA_TEXT-ITM_NUMBER = P_QUOTATION_TEXT-ITM_NUMBER.
WA_TEXT-TEXT_ID = C_HEADERTEXT.
WA_TEXT-LANGU = 'EN'.
WA_TEXT-FORMAT_COL = '*'.
WA_TEXT-TEXT_LINE = <FSVALUE>.
APPEND WA_TEXT TO I_TEXT.
CLEAR WA_TEXT.
ENDIF.
ENDLOOP.I'll try to get clearer
SPLIT P_QUOTATION_TEXT-TEXT_LINE AT CRLF INTO TABLE I_SPLIT.
You are splitting at CRLF, fine. I_split has only one field or none if you want to get more thecnical.
LOOP AT I_SPLIT ASSIGNING <F>.
Here you are starting to loop at each entry of i_split, assigning each entry to , again only one field
ASSIGN COMPONENT SY-TABIX OF STRUCTURE <F> TO <FSVALUE>.
Again, this will never work because as you are declaring it i_split doesn't have an structure, also doesn´t have an structure only one field
It doesn't make any sense that you are assigning the same field to another field-symbol when you already have one.
And even if you used the type I told you, it would only work in the first pass because only in the first pass you can assign the component 1 of the structure because the structure only has one field, there would not be any component 2,3... etc.
Again I don't understand what you are trying to do, if you want to assign that loop pass text to a table, just pass the field-symbol you already have -
Where is error about field-symbols?
I wrote a short program about field-symbols , but when I build it, I had issues with "WA is too short for <F1>." I don't know what is happen.
REPORT ZSKY061901.
data : wa(100) value '0123456789'.
data : begin of line1,
co1(6),
co2(4),
co3(5),
end of line1.
data : begin of line2,
co1 type i value 1,
co2 type i value 2,
end of line2.
data line3 like line2.
data itab like line2 occurs 10 with header line.
line3-co1 = 11.
line3-co2 = 22.
field-symbols:
<F1> structure sbook default wa,
<F2> structure line1 default wa,
<F3> structure itab default line3.
write: / <F1>-mandt,<F1>-carrid,<F1>-connid,<F1>-fldate,
/ <F2>-co1,<F2>-co2,<F2>-co3,
/ <F3>-co1,<F3>-co2.Hi,
field-symbols:
<F1> structure sbook default wa,
<F2> structure line1 default wa,
<F3> structure itab default line3.
Lets take <F1>, here the Structure is SBOOK, so SBOOK will have some fields in it, count the total length of the fields in the SBOOK, it may come around 200 lenght, then the WA length should be 200....
Regards
Sudheer -
Getting a runtime error in block alv that field symbol has been assigned
hi to all experts ,
im getting a runtime error that field symbol has not been assigned in functionmodule reuse_alv_block_list_display
i tried a lot to rectify the error ,im unable to do it thats i have posted here
*& Report ZHAI_ALV_BLOCK_LIST
REPORT ZHAI_ALV_BLOCK_LIST.
type-pools:slis.
tables:mara.
DATA:BEGIN OF IT_MARA OCCURS 0,
MATNR LIKE MARA-MATNR,
MBRSH LIKE MARA-MBRSH,
MATKL LIKE MARA-MATKL,
END OF IT_MARA.
data: begin of IT_DESC OCCURS 0,
MATNR like MAKT-MATNR,
MAKTX like MAKT-MAKTX,
end of IT_DESC.
data: begin of IT_MARD occurs 0,
MATNR like mard-matnr,
WERKS like mard-werks,
LGORT like mard-lgort,
LABST like mard-labst,
end of IT_MARD.
data: IT_FCAT TYPE SLIS_T_FIELDCAT_ALV ,
WA_FCAT LIKE LINE OF IT_FCAT,
IT_FCAT1 type slis_t_fieldcat_alv,
WA_FCAT1 LIKE LINE OF IT_FCAT1,
IT_FCAT2 TYPE SLIS_T_FIELDCAT_ALV,
WA_FCAT2 LIKE LINE OF IT_FCAT2,
wa_layout type SLIS_LAYOUT_ALV,
it_event type SLIS_T_EVENT,
wa_event like line of it_event,
wa_layout like line of it_layout,
V_REPID LIKE SY-REPID.
select-options:so_matnr for mara-matnr.
start-of-selection.
perform f_select_data.
DEFINE ADD_CATALOGUE1.
WA_FCAT-COL_POS = &1.
WA_FCAT-fieldname = &2.
WA_fcat-tabname = &3.
wa_fcat-emphasize = &4.
wa_fcat-ref_tabname = &5.
APPEND WA_FCAT TO IT_FCAT.
END-OF-DEFINITION.
DEFINE ADD_CATALOGUE2.
WA_FCAT1-COL_POS = &1.
WA_FCAT1-fieldname = &2.
WA_fcat1-tabname = &3.
wa_fcat1-emphasize = &4.
wa_fcat1-ref_tabname = &5.
APPEND WA_FCAT1 TO IT_FCAT1.
END-OF-DEFINITION.
DEFINE ADD_CATALOGUE3.
WA_FCAT2-COL_POS = &1.
WA_FCAT2-fieldname = &2.
WA_fcat2-tabname = &3.
wa_fcat2-emphasize = &4.
wa_fcat2-ref_tabname = &5.
APPEND WA_FCAT2 TO IT_FCAT2.
END-OF-DEFINITION.
perform f_build_fcat.
*perform f_build_fcat1.
perform f_build_fcat2.
PERFORM F_BUILD_LAYOUT.
PERFORM F_BUILD_EVENTS.
PERFORM F_BLOC_DISPLAY.
*& Form f_select_data
FORM f_select_data .
select matnr
mbrsh
matkl
from mara into table it_mara where matnr
in so_matnr.
if it_mara[] is not initial.
select matnr
maktx
from makt
into table it_desc
for all entries in it_mara
where matnr eq it_mara-matnr.
endif.
if it_desc[] is not initial.
select matnr
werks
lgort
labst
from mard
into table it_mard
for all entries in it_desc
where matnr eq it_desc-matnr.
endif.
ENDFORM. " f_select_data
*& Form f_build_fcat
FORM f_build_fcat .
ADD_CATALOGUE2:
'1' 'MATNR' 'IT_MARA' 'C500' 'MARA',
'2' 'MBRSH' 'IT_MARA' 'C600' 'MARA',
'3' 'MATKL' 'IT_MARA' 'C300' 'MARA'.
ENDFORM. " f_build_fcat
**& Form f_build_fcat1
FORM f_build_fcat1 .
ADD_CATALOGUE1:
'1' 'MATNR' 'IT_DESC' 'C500' 'MAKT',
'2' 'MAKTX' 'IT_DESC' 'C600' 'MAKT'.
ENDFORM. " f_build_fcat1
*& Form f_build_fcat2
FORM f_build_fcat2.
ADD_CATALOGUE3:
'1' 'MATNR' 'IT_MARD' 'C500' 'MARD',
'2' 'WERKS' 'IT_MARD' 'C600' 'MARD',
'3' 'LGORT' 'IT_MARD' 'C200' 'MARD',
'4' 'LABST' 'IT_MARD' 'C300' 'MARD'.
ENDFORM. " f_build_fcat2
*& Form F_BLOC_DISPLAY
text
--> p1 text
<-- p2 text
FORM F_BLOC_DISPLAY .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
IS_LAYOUT = wa_layout
IT_FIELDCAT = it_fcat
I_TABNAME = 'IT_MARA'
IT_EVENTS = it_event
IT_SORT =
I_TEXT = ' '
TABLES
T_OUTTAB = IT_MARA
EXCEPTIONS
PROGRAM_ERROR = 1
MAXIMUM_OF_APPENDS_REACHED = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
IS_LAYOUT = wa_layout
IT_FIELDCAT = it_fcat1
I_TABNAME = 'IT_DESC'
IT_EVENTS = IT_EVENT
IT_SORT =
I_TEXT = ' '
TABLES
T_OUTTAB = IT_DESC
EXCEPTIONS
PROGRAM_ERROR = 1
MAXIMUM_OF_APPENDS_REACHED = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
IS_LAYOUT = wa_LAYOUT
IT_FIELDCAT = IT_FCAT2
I_TABNAME = 'IT_MARD'
IT_EVENTS = IT_EVENT
IT_SORT =
I_TEXT = ' '
TABLES
T_OUTTAB = IT_MARD
EXCEPTIONS
PROGRAM_ERROR = 1
MAXIMUM_OF_APPENDS_REACHED = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " F_BLOC_DISPLAY
*& Form F_BUILD_LAYOUT
text
--> p1 text
<-- p2 text
FORM F_BUILD_LAYOUT .
wa_layout-edit = 'X'.
wa_layout-window_titlebar = 'MOHAMMED ABDUL HAI'.
wa_layout-zebra = 'X'.
ENDFORM. " F_BUILD_LAYOUT
*& Form F_BUILD_EVENTS
text
--> p1 text
<-- p2 text
FORM F_BUILD_EVENTS .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = IT_EVENT
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT IT_EVENT BY NAME.
READ TABLE it_event INTO wa_event WITH KEY NAME = 'TOP_OF_PAGE' bINARY
SEArch.
if sy-subrc eq 0.
wa_event-form = 'F_TOP_OF_PAGE'.
ENDIF.
MODIFY IT_EVENT FROM WA_EVENT INDEX SY-TABIX TRANSPORTING FORM.
READ TABLE IT_EVENT INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND' BINARY SEARCH.
WA_EVENT-FORM = 'F_USER_COMMAND'.
MODIFY IT_EVENT FROM wa_event INDEX SY-TABIX TRANSPORTING FORM.
ENDFORM. " F_BUILD_EVENTSHi,
When does this runtime error occur? When displaying output (calling FM) or.....
I copied your coding and made a few minor changes and It's working fine for my now:
REPORT ZHAI_ALV_BLOCK_LIST.
TYPE-POOLS:slis.
TABLES:mara.
DATA:BEGIN OF it_mara OCCURS 0,
matnr LIKE mara-matnr,
mbrsh LIKE mara-mbrsh,
matkl LIKE mara-matkl,
END OF it_mara.
DATA: BEGIN OF it_desc OCCURS 0,
matnr LIKE makt-matnr,
maktx LIKE makt-maktx,
END OF it_desc.
DATA: BEGIN OF it_mard OCCURS 0,
matnr LIKE mard-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
labst LIKE mard-labst,
END OF it_mard.
DATA: it_fcat TYPE slis_t_fieldcat_alv ,
wa_fcat LIKE LINE OF it_fcat,
it_fcat1 TYPE slis_t_fieldcat_alv,
wa_fcat1 LIKE LINE OF it_fcat1,
it_fcat2 TYPE slis_t_fieldcat_alv,
wa_fcat2 LIKE LINE OF it_fcat2,
wa_layout TYPE slis_layout_alv,
it_event TYPE slis_t_event,
wa_event LIKE LINE OF it_event,
* wa_layout like line of it_layout,
v_repid LIKE sy-repid.
SELECT-OPTIONS:so_matnr FOR mara-matnr.
START-OF-SELECTION.
PERFORM f_select_data.
DEFINE add_catalogue1.
wa_fcat-col_pos = &1.
wa_fcat-fieldname = &2.
wa_fcat-tabname = &3.
wa_fcat-emphasize = &4.
wa_fcat-ref_tabname = &5.
append wa_fcat to it_fcat.
END-OF-DEFINITION.
DEFINE add_catalogue2.
wa_fcat1-col_pos = &1.
wa_fcat1-fieldname = &2.
wa_fcat1-tabname = &3.
wa_fcat1-emphasize = &4.
wa_fcat1-ref_tabname = &5.
append wa_fcat1 to it_fcat1.
END-OF-DEFINITION.
DEFINE add_catalogue3.
wa_fcat2-col_pos = &1.
wa_fcat2-fieldname = &2.
wa_fcat2-tabname = &3.
wa_fcat2-emphasize = &4.
wa_fcat2-ref_tabname = &5.
append wa_fcat2 to it_fcat2.
END-OF-DEFINITION.
PERFORM f_build_fcat.
PERFORM f_build_fcat1.
PERFORM f_build_fcat2.
PERFORM f_build_layout.
PERFORM f_build_events.
PERFORM f_bloc_display.
*& Form f_select_data
FORM f_select_data .
SELECT matnr
mbrsh
matkl
FROM mara INTO TABLE it_mara WHERE matnr
IN so_matnr.
IF it_mara[] IS NOT INITIAL.
SELECT matnr
maktx
FROM makt
INTO TABLE it_desc
FOR ALL ENTRIES IN it_mara
WHERE matnr EQ it_mara-matnr.
ENDIF.
IF it_desc[] IS NOT INITIAL.
SELECT matnr
werks
lgort
labst
FROM mard
INTO TABLE it_mard
FOR ALL ENTRIES IN it_desc
WHERE matnr EQ it_desc-matnr.
ENDIF.
ENDFORM. " f_select_data
*& Form f_build_fcat
FORM f_build_fcat .
add_catalogue2:
'1' 'MATNR' 'IT_MARA' 'C500' 'MARA',
'2' 'MBRSH' 'IT_MARA' 'C600' 'MARA',
'3' 'MATKL' 'IT_MARA' 'C300' 'MARA'.
ENDFORM. " f_build_fcat
**& Form f_build_fcat1
FORM f_build_fcat1 .
add_catalogue1:
'1' 'MATNR' 'IT_DESC' 'C500' 'MAKT',
'2' 'MAKTX' 'IT_DESC' 'C600' 'MAKT'.
ENDFORM. " f_build_fcat1
*& Form f_build_fcat2
FORM f_build_fcat2.
add_catalogue3:
'1' 'MATNR' 'IT_MARD' 'C500' 'MARD',
'2' 'WERKS' 'IT_MARD' 'C600' 'MARD',
'3' 'LGORT' 'IT_MARD' 'C200' 'MARD',
'4' 'LABST' 'IT_MARD' 'C300' 'MARD'.
ENDFORM. " f_build_fcat2
*& Form F_BLOC_DISPLAY
* text
FORM f_bloc_display .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = sy-repid.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = wa_layout
it_fieldcat = it_fcat1
i_tabname = 'IT_MARA'
it_events = it_event
*IT_SORT =
*I_TEXT =
TABLES
t_outtab = it_mara
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = wa_layout
it_fieldcat = it_fcat1
i_tabname = 'IT_DESC'
it_events = it_event
*IT_SORT =
*I_TEXT =
TABLES
t_outtab = it_desc
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = wa_layout
it_fieldcat = it_fcat2
i_tabname = 'IT_MARD'
it_events = it_event
*IT_SORT =
*I_TEXT = ' '
TABLES
t_outtab = it_mard
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " F_BLOC_DISPLAY
*& Form F_BUILD_LAYOUT
FORM f_build_layout .
wa_layout-edit = 'X'.
wa_layout-window_titlebar = 'MOHAMMED ABDUL HAI'.
wa_layout-zebra = 'X'.
ENDFORM. " F_BUILD_LAYOUT
*& Form F_BUILD_EVENTS
FORM f_build_events .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = it_event
EXCEPTIONS
list_type_wrong = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
SORT it_event BY name.
READ TABLE it_event INTO wa_event WITH KEY name = 'TOP_OF_PAGE' BINARY
SEARCH.
IF sy-subrc EQ 0.
wa_event-form = 'F_TOP_OF_PAGE'.
ENDIF.
MODIFY it_event FROM wa_event INDEX sy-tabix TRANSPORTING form.
READ TABLE it_event INTO wa_event WITH KEY name = 'USER_COMMAND' BINARY
SEARCH.
wa_event-form = 'F_USER_COMMAND'.
MODIFY it_event FROM wa_event INDEX sy-tabix TRANSPORTING form.
ENDFORM. " F_BUILD_EVENTS -
Error in drill down of RRI- Field Symbol not assigned
Dear all,
I am trying to call a SAP transaction on click of the jump target. I have created the jump target in the following way ..let me know if I am wrong ..
Goto RBBS transaction . Specifed the sender report as 0SD_C01/0SD_C01_Q025 (Sales Volume Analysis) and target as r/3 client 210 and specifed the transaction Va01 as target.
But when I executed the report and did a right click ..on the context menu I coudl see the desription of the Jump target I have created and upon clicking I received a error ..field symbol not assigned ..
Can any let me know the cause of the error ..and how to resolve.. do i need to give any extra parameters while creating jump target..
Thanks,
GuptaHello Gayathri,
One you got the dump you can select debugger button in top-left corner screen.
That will take you to the execution snap shot where you can check all the field symbols and find out which one is not
assigned. accordingly you can find out what is missing on input side to avoid this dump.
Hope this helps!
Thanks,
Augustin. -
Error: Field symbol not assigned
Hi all,
When I run a query (BW version 3.5) with a condition or an exception I receive an error message "Field symbol has not yet been assigned". The same query run fine on BW version 3.1.
SP 11 and SP12 are installed.
Any idea how to solve the problem??Paolo,
Note 555143 can not be implemented. Probably because I am working in BW version 3.5 instead of BW version 3.1.
Thanks anyway.
Regards,
Hans -
Field symbol has not yet been defined-ALV Grid Display in Report
Hi all,
Iam calling a Function module for ALV grid display in Report programming. Its throwing the Error message Field Symbol has not yet defined. Can any one suggest what i have to do regarding it?Hi,
<li> This is problem with fieldcatalog.
<li> Check field names or table name in small letters in quotes while building fieldcatalog internal table
<li> Check the fieldcatalog internal table , whether it has same fields as in data table which is shown using GRID_DISPLAY function module.
Thanks
Venkat.O -
Issue with field symbol not assigned in SMQ2
We are facing an issue with an error in SMQ2.
The error is "field symbol not assigned". There is also short dump in ST22.
I have read the previous forum threads and it talks about going into the debugger mode.
However, which is the program to be debugged ?
How do I navigate from SMQ2 to the ABAP program.
Kindly let me know.
Regards,
SanjayHi Sanjay,
You need to debug program RSTRFCM3. This is the program which drives SMQ2.
However just check if there are any support pack upgrades to the program recently since this is a standard program.
Regards
Abhii -
Problem with field symbols in ecc 6.0
i have the following code written in 4.6 version now i am executing the old report in 6.0 but i am facing with some unicode error.
FIELD-SYMBOLS:
<line_of_bs_table> LIKE tbl1024,
READ TABLE bs_table INDEX row_bst ASSIGNING <line_of_bs_table> .
buffer_bsbuffer_ptr(aux) = <line_of_bs_table> >col_bst.
tb1024 is standard sap structure for storing buffer contents
i have the following error in ecc 6.0
structure type '<line_of_bs_table> >+col_bst' does not start with a charecter type field in unicode programs in such cases
offset/ length declarations are not allowed.
can any one tell how can a field symbol structure is changed to charecter type.Hi elinuk,
you have already posted this thread in the ABAP general forum under problem in field symbols in ecc6.0 and I think that this forum is more related to this issue than the DMS forum. So please close this thread and investigate this issue further in the ABAP general forum.
Best regards,
Christoph -
Opening query in BEx field symbol issue
Hi,
I'm facing a problem in opening BEx Analyzer 7.0.
After starting BEx and logging on to the system a "BI Server error"-popup appears mentioning that there is a problem in the communication with the BI-server and that therefore the connection to the BI-server has been broken. The detailed error is: "Field symbol has not yet been assigned".
When clicking OK and logging on for the second time there is no problem.
Does anyone know how I can solve this?
Thanks,
Michel ScheresHi,
Front end is not installed properly. You can contact basis team it will resolve.
Regards,
Ajay. -
Problem in field symbols in ecc6.0
i have the following code written in 4.6 version now i am executing the old report in 6.0 but i am facing with some unicode error.
FIELD-SYMBOLS:
<line_of_bs_table> LIKE tbl1024,
READ TABLE bs_table INDEX row_bst ASSIGNING <line_of_bs_table> .
buffer_bsbuffer_ptr(aux) = <line_of_bs_table> >col_bst.
tb1024 is standard sap structure for storing buffer contents
i have the following error in ecc 6.0
structure type '<line_of_bs_table> >+col_bst' does not start with a charecter type field in unicode programs in such cases
offset/ length declarations are not allowed.
can any one tell how can a field symbol structure is changed to charecter type.FIELD-SYMBOLS:
<line_of_bs_table> LIKE tbl1024.
DATA w_wa(1024) type c.
READ TABLE bs_table INDEX row_bst ASSIGNING <line_of_bs_table> .
move <line_of_bs_table> to w_wa.
buffer_bsbuffer_ptr(aux) = w_wacol_bst.
i am still getting error like
'<line_of_bs_table> and w_wa are not mutually convertible.'
and i try to use move corresponding instead of move but then it says
'w_wa is not internal table or structure with the heade line'. -
RFC_ERROR_SYSTEM_FAILURE: Field symbol has not yet been assigned.
I am on the newest patches for basically all things related to BI, and some of them are giving me trouble. The problem I am now encountering is when I try to jump from my Purchasing Query to my Purchasing Line Items Query, I get an error, stating RFC_ERROR_SYSTEM_FAILURE: Field symbol has not yet been assigned. Does anybody know what this means? I haven't changed either query recently, and it was working just fine.
Any help is appreciated.
Thanks,
OwenHi
Record a RSTT trace by refering to the note : 899572, and then execute the trace in RSTT.If will throw a dump and chekc where the issue is.It is difficult to say why the error has occured just from teh error "RFC_ERROR_SYSTEM_FAILURE: Field symbol has not yet been assigned."
Regards, Hyma -
Error while trying to run Bex Query -------- Field symbol is not assigned.
Hello Every body,
I am facing the following error after giving some value in Selection screen and trying to run the Bex Query
ERROR : Field symbol is not assigned.
Thanks in advance,
Praveencan u plz give details of variables, what it is build on and the value u r inputing,
also is thr any dump.
double click on the error message it shows u. it will give u the detailed error message. post that too -
RUn time error while saving po Field symbol has not yet been assigned.
Hi Experts,
I am getting abap dump while saving PO in ME21N plz seee the below dump plzzzzzzzzzzzzzzzzzzzzz help me
Runtime Errors GETWA_NOT_ASSIGNED
Date and Time 19.06.2009 11:24:46
Short dump has not been completely stored (too big)
Short text
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKKBL" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
You attempted to access an unassigned field symbol
(data segment 106).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"GETWA_NOT_ASSIGNED" " "
"SAPLKKBL" or "LKKBLF99"
"GEN_FIELD_OUT2"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
em environment
SAP-Release 700
Application server... "gplqty"
Network address...... "128.12.0.19"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "GPLQTY"
Database type..... "MSSQL"
Database name..... "GPQ"
Database user ID.. "gpq"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Aug 4 2008 02:33:25"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 172
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 16759360
Heap.... 0
Page.... 237568
MM Used. 12036016
MM Free. 530432
er and Transaction
Client.............. 410
User................ "SAP_SUPPORT"
Language key........ "E"
Transaction......... "ME21N "
Transactions ID..... "9E955CDE97CBF1648B4C001A64C7B85A"
Program............. "SAPLKKBL"
Screen.............. "SAPLKKBL 0500"
Screen line......... 3
Information on where terminated
Termination occurred in the ABAP program "SAPLKKBL" - in "GEN_FIELD_OUT2".
The main program was "RM_MEPO_GUI ".
In the source code you have the termination point in line 2908
of the (Include) program "LKKBLF99".
Source Code Extract
Line SourceCde
2878 else.
2879 assign <fs11> to <field>.
2880 gs_fc = gs_sfc11.
2881 endif.
2882 when 012.
2883 if gs_out_flags-slave ne 'X'.
2884 assign <fm12> to <field>.
2885 gs_fc = gs_mfc12.
2886 else.
2887 assign <fs12> to <field>.
2888 gs_fc = gs_sfc12.
2889 endif.
2890 when 013.
2891 if gs_out_flags-slave ne 'X'.
2892 assign <fm13> to <field>.
2893 gs_fc = gs_mfc13.
2894 else.
2895 assign <fs13> to <field>.
2896 gs_fc = gs_sfc13.
2897 endif.
2898 when 014.
2899 if gs_out_flags-slave ne 'X'.Hi,
this error occurs when you try to address a field-symbol before it has been assigned to a field or
the assignment has failed.
Use following code to remove this dump
Assign <mara-matnr> to <fs>.
if sy-subrc <> 0.
Error Message.
Endif.
Hope it helps,
Raj
Maybe you are looking for
-
FDMEE import script not working
Hi, I had a simple import script in FDM Classic that was removing every lines of data from a source file for every amount lower than 0.50 and higher than-0.50. The FDM Classic import script was: Function Remove_50(strField, strRecord) 'Purpose: To s
-
CDI Fails when deployed twice from OEPE 12c to WebLogic 12c
Hi, First when I use CDI on WebLogic 12c it works the first time without any problems , First I had to do this ( From Steve Button ) else I get some inject problems Just as an out there kind of thought, OEPE does use the split-directory model for dep
-
How to genearte Unit Test reports through ANT/Command line ?
Hi, I am using sql developer unit test feature to test my database code. I am planning to execute and generate reports by running ant script. Is it possible to get the unit test results in any format (text,XML,HTML) after running the tests. How to in
-
Cannot Activate Adobe CS6 Production Premium
Ive Installed the Adobe CS6 Production Premiun as a Trial. Already got the License but appears that the serial number is invalid. Im copying it exactly as it came in the certificate. What can be wrong?
-
Constantly New Tabs Opening While Browsing
I use both safari and chrome for browsing in my macbook air, ever since i updated it to OS X Yosemite version 10.10.2 i am experiencing irritating problems while browsing in either of the browsers. Constantly a new tab opens with a new website while