Error in firmware cFP 2020 & connection time out error in MAX
Hi!
My cFP 202O status LED is flashing twice - which indicates that there is an error in the firmware (according to the user manual). I've already installed the latest firmware downloaded from the NI website and it says that I'm suppose to update the OS from remote system in MAX. When trying to update the BIOS system, this comes up.
Version on the remote target : 10.1
Available version on the host : 10.4
I'm a little confused as to which is the remote target and which is the hosting system? It also says that the previously installed software will be removed if update is continued and that it might damage the hardware if manually booted or turned off so I'm a little skeptical to proceed.
I'm alsoreceiving error messages in MAX. Errors in MAX are 'Connected - No software installed' and connection to a remote device timed out. I'm wondering if this error occurs because of the firmware problem or is it because of the timeout settings? Which is better? A higher or lower timeout time?
I'm new with this. Any info is greatly appreciated! Thanks!!!
Solved!
Go to Solution.
The target is your compact Fieldpoint. The host is your PC that you are on. Since the PC has a newer version, you will want to have that software downloaded to the cFP by way of MAX. Of course there is a slight chance you could lose power to the cFP if your luck is bad and the power goes out in the middle of the upgrade. It would be best to have your power supply for the cFP running off a battery backup UPS for security.
I'm guessing the error is due to your firmware problem.
If you are really uncertain on how to proceed, it may be best if you contact NI directly and they could help walk you through the update process.
Similar Messages
-
Connection time out error in server proxy
Hi
My scenario is file to proxy. . It is synchronous scenario.
I am giving wait time as input and in the proxy i wrote a code to wait till the inputed value and after that send a response. it is working fine only if i give less than 60 sec.
If i specify above 60 sec i am getting the connection time out error in SXMB_MONI.
Please help me to solve this.
Regards
DiviaTo increase Timeout use
Go to transaction SMICM........ Goto->services......choose HTTP.....edit this service.........increase maximum processing time and activate this service
look blog for timeouts:
The specified item was not found. -
Connection time out error in HTTP
Hey guys
i m getting connection time out error in a HTTP scenario,when i go in SXMB_ADM i dont find any entry with the name HTTP_TIMEOUT.
even in RZ10 i cant find the correct profile parameter.
i m taking help from michaels blog
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
i m on PI7.0 SP09
is there some other place i can find this entry? or do i need to ask the basis guys to add it?
thanx
ahmadAlso, there may be other factors to consider depending on your scenario. If you don't have it already, look at the latest <a href="http://service.sap.com/~sapidb/011000358700005909032005E/XI30XI70_TroubleGuide.pdf">XI Troubleshooting Guide</a> - Section 9.2 on "Timeouts in XI".
Regards,
Jin -
Hello sir,
Whenever i install addon on SAP B1 i get connection time out error can anyone help meManish,
it depends on how you set your connection. it must be through command line argument. if you have set your connection string as
sConnectionString = "0030002C0030002C00530041005000420044005F00440061007400650076002C0050004C006F006D0056004900490056"
then change it to
sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
and give the connection string 0030002C0030002C00530041005000420044005F00440061007400650076002C0050004C006F006D0056004900490056 as your command line argument in project properties -- Debug tab. prepare the addon ard and try installing it.
regards,
Binita -
SOAP Adapter: Connection time out error
Hi Guys,
I do it one scenario for Proxy to webservice Asynchronous . I have send the input details through Proxy. In Sxmb_Moni shows success message. But Receiver side doesn't reach the payload. Because receiver side (Soap Adapter) shows connection time out error. But i have given correct URL and SOAP Action in receiver communication channel. Please give some suggestions to solve that issues. Please don't refer links.
Thanks & Regards
Vijayhi
this is a time out error
increase the timeout value by specifying the parameter
XI.Timeout in the module parameter of soap Adapter
OR
1. This is because of TimeOut. The default timeout value for synchronous calls is 5
minutes. You can increase this value by setting parameter XI.Timeout in the module parameter table of
the SOAP adapter. The value must be given in milliseconds. For example, value 600000
represents the timeout value of 10 minutes. This parameter is not recognized in systems prior to SP13.
2.The Other Options is send the queue id with your request message.
http://host:port/XISOAPAdapter/MessageServlet?channel=p:s:c
&version=3.0&...&QueueId=xxxxxxxxxxxxxxxx
where xxxxxxxxxxxxxxxx is an ABAP queue ID.
3.Check your RWB message monitoring.
Is there any system failure message and holding message be there.
If then clear the messages.
4. Increase the time out parameter for HTTP in your altova xml spy.Defaultly it will be very low. -
Upgrading iOS 4.0 to 4.1 (Connection time out error)
Hello any help will be highly appreciated..
I currently have a 3rd gen iPod Touch 32gb, with iOS 4.0.2 installed and working perfectly. I am now pestered to download and update to the newest version 4.1 every time I sync my iPod, which I have no problem doing..
Problem is every time I agree to download this update iTunes downloads the update then when it has just finished downloading (remains in the "downloads" in itunes folder) appears that it is processing the download, after about 4 minutes of it finsihing downloading and appearing to be processing it gives me an error saying there is a connection time out issue, to check my internet connection and try again.
I have tried at least 1 dozen,or more times to do this. It has done the same thing every time.
It won't let me restore my iPod because when i try to do so it asks me to "Update and Restore" which it cant update! so its pretty frustrating.
The iPod works fine no problems, it just comes to when trying to download this update.
Is there anything I can do? Would I be able to try and update it on another computer?
Thank you for any assistance, im just sick of seeing the "a new ipod update is a vailable, download now?" pop-up every time I plug in the iPod.Hello!
Been encountering the same problem for two days, drove me crazy! Tried everything, including disabling the firewall and antivirus but nothing worked, so here is what worked with me:
*If you use Internet Explorer, do the following:*
*First close iTunes then go to Internet Explorer > Tools > Internet Options > Advanced Tab and then scroll until you get to the ''Security'' section, uncheck the box that says: Check for server certificate revocation* and now launch iTunes and try again.* Hope this works for you as well! -
Itunes update to firmware fails, because connection times out.
I have been unsuccessfully attempting to update my iphone 3gs and ipad to iOS 5 for over a month now. I have spent many, many hours on this, and many phone calls to apple support. I disable Norton 360, and windows firewall, and my firewall on my router. I've tried updating my router's firmware, which bricked the router--thanks apple for insisting this was the problem, and I have replaced the router, with a new one. Itunes diagnostics gives me the following information. I am using itunes as the administrator in Windows 7, 64 bit, although itunes doesn't recognize it, unless I reinstall it as the administrator, but then once I restart the computer, itunes no longer recognizes that I using Windows as an admin.
Also, the firmware cannot update, because the connection times out, despite all my firewalls, and antivirus being turned off.
I've tried downloading iOS 5 and then updating using restore, but that didn't work. I've poured through support forums, and error codes: I get 1611, etc. Cannot seem to resolve this.
Any ideas?
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.2.0
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 0040A7BC031F98E0
Current user is not an administrator.
The current local date and time is 2011-11-15 11:35:00.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 4800 Series
**** External Plug-ins Information ****
No external plug-ins installed.
The drive F: HL-DT-ST DVDRAM GP08LU30 Rev 1.00 is a USB 1 device.
iPodService 10.5.0.142 (x64) is currently running.
iTunesHelper 10.5.0.142 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {01DC2EA3-0DD0-4A51-80A6-7B414E4C6291}
Description: Realtek PCIe GBE Family Controller
IP Address: 192.168.2.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1
DHCP Enabled: Yes
DHCP Server: 192.168.2.1
Lease Obtained: Tue Nov 15 11:32:39 2011
Lease Expires: Tue Nov 15 11:32:38 2011
DNS Servers: 192.168.2.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-15 11:33:52.Disable your firewall/security software and try again.
-
Connection time out error when calling a webservice on ICF
Hi
We have a webservice exposed on ECC 5.0 on the ICF. However, when we invoke the webservice - after 10 seconds , we get a error message
Error reading server response: The operation has timed-out
I checked ICMAN parameters
icm/conn_timeout - and set its new value to 50000 ms ( 50 secs ) - the connection still timed out when the webservice tooks more than 10 seconds to process.
icm/keep_alive_timeout - I don't see an option to change the new value for this parameter
What am i missing here - how can I set the connection not to time out uptil say 45 seconds - what parameter do I change here ?I partly agree with Kaustubh,
if you test the service from within SICF the parameter SAPLOCALHOSTFULL (FQHN = Fully-Qualified Host Name) is taken to build the test URL. If this host name is not correct resp. cannot be resolved by the server, you will run into an error.
icm/host_name_full is only taken if SAPLOCALHOSTFULL is not maintained.
So first of all you shold check this parameter befor increasing timeout parameters at random.
If the parameter does not solve the problem, you should have a look into the ICM trace file (dev_icm) and search for "ERROR".
Regards,
Stefan -
500 connection time out error in web report(portal)
Hi Experts,
Points to note about the 500 connection
timeout error
1. Error persists only in portal. query/
report works fine in RSRT and Bex Analyser.
2.As per previous discussions tried
implementing SAP notes to change ICM parameter for max of 10 minutes.
However, it is said by Basis team that they
can change parameter only if all the report gives the same error.
Since all the report works fine they are nt
ready to change the parameter.
4. Error: Time exceeds 600seconds
5.This issue arised only after upgrading
the system to 7.3. post - upgrade. this report was working fine before.
6. Even in the portal, report works fine
when we use ABAP web link.
In the trace file there is a error message
for this report "Could not find a command, masscommand or group command
with alias <new task>. It is defined in group .
<TaskCollectionGroup>. pls any one help me. This is for 7.31 NW portal
Please suggest ur thoughtsThanks. I will check on this once I get reply from the corresponding team. However, need another advice.
There are issues in portal where some buttons (delete, undo, copy/paste - IP funcitonalities) are not working. When we find java script in the background is not working properly. there is no sequence of call in the java script after upgrade. In trace, for some reports with this issue has same error like "could not find command..." . My question is .. is there any possibility that these java scripts corrupt occurs because of this KM components? -
ITunes Match network connection time out error
I have just signed up to itunes match but at the end of step 1 I get a network connection error at the 'Waiting for apple to deliver your results' stage every time.
I have tried everything suggested on forums regaring unticking proxy server settings and turning off firewall but nothing works.
I have run diagnostics on itunes and it is coming up with two anomolies. It is giving me a 'cannot make secure connection to itunes store' error although I can connect to itunes store I am wondering whether this is causing the problem with itunes match.
It is also stating in the diagnostics report that 'current user is not an administrator' although I am logged on with an adminstrator account on windows 7 64bit.
If anyone can point me in the right direction to sort this problem i would be very grateful.Great thanks. I am using NOD32 so hopefully that will be the culprit. I will try this later when i get home as you have to restart the PC in safe made to uninstall ESET and I can't do that over a VPN link.
I was thinking of getting rid of ESET anyway as it is a bit cpu hungry. I was thinking of just using the windows firewall and AV. Did you reinstall ESET after itunes match worked? And did it still continue to work if you did?
Sorry to bombard you with questions!
Thanks again. -
Network connection / time out errors
I am uploading a large number of photos to the internet. After a while (when not using my computer), I have a network connection error and the photos stop uploading. Do you have a solution to stop these errors when not using the computer?
If I was using the computer, this would not be a problem. It seems the computer may have gone to sleep and ceased the internet connectionWhat is your cellular reception level when this occurs?
Since a reset and restoring your iPhone with iTunes has not resolved it, I would give AppleCare a call at (800) 694-7466. After you explain the problem and what you have already tried to resolve it, the person you speak with will probably contact AT&T technical support as a conference call. -
Everytime I try to update my 3rd generation Ipod touch to iOS 5, I get a connection timeout message after the software has completely downloaded and is finishing?
DIsable the computer's security software (antivirus and firewall) during the download and update.
-
error: cannot communicate with bing.com (204.152.194.204)
Bring up System Preferences and look at the bottom of the window. If there is software listed there, make sure you have the latest version that runs on OS X 10.7 Lion. Then go into users and look at login items. Same thing, ensure that any software listed there is at a level to run with OS X 10.7 Lion.
While Lion has a minimum requirement of 2GB of memory, 4GB is recommended. -
Message Mapping - connection time out
Hi ,
I hae just created a message mapping and when I click on Test tab and load a payload in source and try to test the mapping , it gives me connection time out error from java...
What could be wrong ? Mapping involves an XML to IDOC .
Cheers,Hello,
I think so (Experts, please correct me if I'm wrong). Before, we had a scenario in which the external definition was about 960kb. It really did post issues when testing in the message mapping itself. There are three options:
a.) Use less detail in your sample message mapping, in this way you can correct the error in the mapping itself.
or
b.) Test in operation mapping, and then do the correction in message mapping afterwards. If the testing is successful, make sure that you don't click the drop down icon. Instead, export the result as a zip file and then extract it. (if this hangs, go for c)
or
c.) Test at runtime
Hope this helps,
Mark
Edited by: Mark Dihiansan on Dec 20, 2010 10:09 AM -
PACMAN: connection time out, PASV
Hello:
This seems to be a regular topic in the forum, but I tried to solve and I could not.
I just installed Archlinux, so, I'm still in console mode and can not paste the information.
When I try to do the:
pacman -Syy
for the update, I get that the connection times out.
I activated the:
XferCommand=/usr/bin/wget --passive-ftp -c -O %o %u
For some diagnose, and it hangs in the tag PASV ..., which I do not the meaning.
I uses ping and it works, I can receive and send packages.
I selected different mirrors, like some 15, and, in all, I get this error.
I changed in the /etc/rc.conf some network things: read in a forum that, in that file, I must change the:
gateway="default gw 192.168.0.1"
to
gateway="default gw 192.168.1.1"
And did not work. Also I take out the "!" in the gateway, with the same results. After all that, I putted in the original form.
I'm behind a the most horrendous proxy in my college, it block many pages, but I do not thing that's the problem, because in Windows I can download from ftp, etc. After all, when using ping, it works!
Any suggestion please?
EDIT: I have a 64 bit system, if that suggest something.
Last edited by gromlok (2010-04-19 12:30:17)Hello:
Well, the "error" message is that the "connection times out", after that, it tries to reconnect to the same mirror, and again, it gives me that message. Later, it goes to another mirror -if I have it uncommented-, and so on, until my mirror list ends.
In the /etc/rc.conf I uncommented the following line:
XferCommand=/usr/bin/wget --passive-ftp -c -O %o %u
So, when I do "pacman" I get some additional information -which I can not understand-, but It connects to the server of the mirror, and some flags appears, but in the PASV flag, it hangs, until I get the connection times out message. Any idea of what indicates this flag? -passive something?-
In my /etc/resolv.conf I got:
domain: XXXXX.com
name server: XXX.XXX.X.XXX
What can I do with this information. I did not modify any file after installation, just what posted at the beginning of the thread.
I can ping to any page, for example, www.google.com, whit few lost data, and I receive the packages.
Waiting for your answers. (help!!)
Greetings
Last edited by gromlok (2010-04-19 13:48:17)
Maybe you are looking for
-
Import from Designer crashes with IMAGE data type
Hello, I'd like to report an issue with Data Modeler while importing from Oracle Designer. If you consider this a bug, please let me know if I need to do anything else to request a fix for it. I've used the import > Oracle Designer Model tool to impo
-
Problem opening a file from a command line executed program with args
I have to run my program from the command prompt like this: c:\ java Parser template.txt keyvalue.dat output.txt I figured out how to read the args in, and I know they are being assigned to the proper variables. My template.txt, etc are in the same d
-
How can I do to discover the age of my macbook
I want to discover when i've bought my macbook pro because i've dismembered it
-
I can't do anything in iAd Producer 4.1
Hi there , I have download an iAd Producer 4.1 . and when I trying to make some widgets for iBook Author (or any choices) the work space is disapear and I cant add any objects to it , and there is an error massage shown when trying to go back to over
-
T430s two-finger scroll occasionally causes page to 'jump'
My problem occurs sporadically while using two-finger scroll to read documents online. I'll scroll up or down a little bit and the page will jump as if I had pressed pagedown or pageup (sometimes it jumps even further). I'm currently using Two-Finger