Error in generating a sel-screen.
friends,
am getting an error while activating a report saying that error in generating the sel. screen 1000 in line 0....also, am not able to select the selection-texts (in the goto->text elements), which says there aer serious syntax errors...pl help..thanks all..
here is my selection-screen declaration code
SELECTION-SCREEN BEGIN OF BLOCK APPLICATION WITH FRAME TITLE TEXT-002.
PARAMETERS:
PM_WERKS LIKE MSEG-WERKS OBLIGATORY DEFAULT '1000',
PM_MJAHR LIKE MKPF-MJAHR OBLIGATORY DEFAULT SY-DATLO.
SELECT-OPTIONS:
PM_MBLNR FOR MSEG-MBLNR NO-EXTENSION MEMORY ID MBN.
PARAMETERS :
PM_LGORT LIKE MSEG-LGORT OBLIGATORY DEFAULT '1001',
PM_BUDAT LIKE MKPF-BUDAT.
SELECTION-SCREEN END OF BLOCK APPLICATION.
Hi Satish,
i am not facing any kind of problem with your code. can you check it once.
TABLES: mseg.
SELECTION-SCREEN BEGIN OF BLOCK application WITH FRAME TITLE text-002.
PARAMETERS:
pm_werks LIKE mseg-werks OBLIGATORY DEFAULT '1000',
pm_mjahr LIKE mkpf-mjahr OBLIGATORY DEFAULT sy-datlo.
SELECT-OPTIONS:
pm_mblnr FOR mseg-mblnr NO-EXTENSION MEMORY ID mbn.
PARAMETERS :
pm_lgort LIKE mseg-lgort OBLIGATORY DEFAULT '1001',
pm_budat LIKE mkpf-budat.
SELECTION-SCREEN END OF BLOCK application.
Regards
Vijay
Similar Messages
-
'Error when generating the selection screen "0500"
Dear all,
I have copied a function group QEES to ZQEES through SE80. In that I have copied all screens, includes, function modules etc..
Now when I activate the ZQEES, I get an error 'Error when generating the selection screen "0500" of report "SAPLZQEES'.
There is no problem with screen 0500, I have activated it.
But when I activate ZQQES, I get the error.
Please let me know the reason for this.
It will be highly appr
Thanks in advance,
SachinHi Sachin,
there could be a problem while copying in renaming, delete the Function group ZQEES and recopy the Standrad function group and only rename the the FM QEES_SHOW_SELECTION_SCREEN to ZQEES_SHOW_SELECTION_SCREEN and copy and activate it will work.
regards,
Srini -
Error when generating the selection screen '0005'of report 'XYZ'
Hi All,
We copied std SAP pgm and were trying to rename the one of the screen but couldnt. When I tried to transport it to test system it went in to dump giving the error Error when generating the selection screen '0005'of report 'XYZ' .
Please advise me on how to remove this dump.
Regards
SaurabhIf you look at the selection screen, you'll probably find that there are overlapping elements (text elements over select-options) or something like that.
Rob -
Error when Generating the Selection Screen?
Hi Guys,
When i am executing the program with this code .I am getting this type of Error
" Source code ZUSFICOR00013_MM_ACNT_COSTING Line 0
Error when generating the selection screen "1000" of report
I got this Error while activating my program.The code which i wrote is the below one.
SELECTION-SCREEN: BEGIN OF LINE.
Select-Options : S_MATNR for MBEW-MATNR ."MatchCode Object MAT1,
SELECTION-SCREEN COMMENT 2(10) TEXT-004 for field s_matnr.
SELECTION-SCREEN: END OF LINE.
Thanks,
Gopi.Hi Seshu,
While doing EPC for the Below code
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(15) TEXT-004 for field s_matnr.
Select-Options : S_MATNR for MBEW-MATNR ."MatchCode Object MAT1,
SELECTION-SCREEN: END OF LINE.
I am getting an Warning like " Selection text or parameter for selection field S_MATNR is not maintained" How to coorect this one?
and also for the this Below Code
s_fieldcatalog-col_pos = 1.
s_fieldcatalog-fieldname = 'BWKEY'.
s_fieldcatalog-tabname = 'i_MBEW_out'.
s_fieldcatalog-seltext_l = 'Plant'.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 2.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname = 'i_MBEW_out'.
s_fieldcatalog-seltext_l = 'Material'.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 3.
s_fieldcatalog-fieldname = 'MAKTX'.
s_fieldcatalog-tabname = 'i_MBEW_out'.
s_fieldcatalog-seltext_l = 'Material Description'.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
I am getting EPC Error like " Char. strings w/o text elements will not be translated:
'Plant'"
Can u please tell me How to correct these type of EPC Error's.
Thanks,
Gopi. -
Error when generating the selection screen "0100" of report "SAPMZMATMAS
How to over come this error
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
*SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(6) TEXT-002 FOR FIELD P_STATUS.
PARAMETERS: P_STATUS(18) TYPE C." ZMATMAS-STATUS.
SELECTION-SCREEN COMMENT 24(8) TEXT-003 FOR FIELD S_MATNR.
SELECT-OPTIONS: S_MATNR FOR ZMAT-MATNR NO-EXTENSION.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF SCREEN 100 .
100 screen i am generating as selection screen
1100 is my main screen
please reply,
Thanks in Advance.
VamsiIf you look at the selection screen, you'll probably find that there are overlapping elements (text elements over select-options) or something like that.
Rob -
Error when generating the selection screen "1000" for Report ztest
Hi Experts,
I am getting this strange error while trying to activate my report. I simply copy paste report from my other system to new system it was working fine there. I also created all include program etc.
While I am trying to create "Selection-text" it is giving message that "Program contain some serious syntax error" while checking syntax saying that "Program is syntactically right".
Any idea how to solve this???
Regards,
GouravHere is the code::::
SELECTION-SCREEN BEGIN OF BLOCK select WITH FRAME TITLE text-sl1.
Component
SELECT-OPTIONS:
s_xcide FOR gw_zsmmess_compo-xcide
NO INTERVALS
MATCHCODE OBJECT zsm_xcide_oi.
SELECTION-SCREEN END OF BLOCK select.
SELECTION-SCREEN BEGIN OF BLOCK prcopt WITH FRAME TITLE text-sl2.
Default severity code
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-dsc.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_dfsevc LIKE gw_zsmglob_sever-sevco
OBLIGATORY
MATCHCODE OBJECT zsm_sevco
DEFAULT '3'.
SELECTION-SCREEN COMMENT 37(30) pt_sevtx.
SELECTION-SCREEN END OF LINE.
Minutes to wait before re-issuing alert
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-ria.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_aleexp(3) TYPE n
OBLIGATORY
DEFAULT '45'.
SELECTION-SCREEN COMMENT 37(10) text-min.
SELECTION-SCREEN END OF LINE.
Use component specific parameters Yes/No
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-cpu.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_usecsp RADIOBUTTON GROUP rg1 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(10) text-rby FOR FIELD p_usecsp.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_dnucsp RADIOBUTTON GROUP rg1.
SELECTION-SCREEN COMMENT 35(10) text-rbn FOR FIELD p_dnucsp.
SELECTION-SCREEN END OF LINE.
Create/update component specific parameters automatically
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(32) text-cpc.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_updcsp RADIOBUTTON GROUP rg2.
SELECTION-SCREEN COMMENT 35(10) text-rby FOR FIELD p_updcsp.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_dnccsp RADIOBUTTON GROUP rg2 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(10) text-rbn FOR FIELD p_dnccsp.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-afo.
SELECTION-SCREEN POSITION 33.
Fire one alert per component/error type combination
PARAMETERS: p_afrerr RADIOBUTTON GROUP rg3 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(50) text-afe FOR FIELD p_afrerr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 33.
Fire one alert per component (= outbound XI interface)
PARAMETERS: p_afrcom RADIOBUTTON GROUP rg3.
SELECTION-SCREEN COMMENT 35(50) text-afc FOR FIELD p_afrcom.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 33.
Fire one alert per run
PARAMETERS: p_afrrun RADIOBUTTON GROUP rg3.
SELECTION-SCREEN COMMENT 35(50) text-afr FOR FIELD p_afrrun.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-sel.
SELECTION-SCREEN POSITION 33.
Select messages since last run
PARAMETERS: p_lstrun RADIOBUTTON GROUP rg4 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(40) text-slr FOR FIELD p_lstrun.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 33.
Select messages in selected interval
PARAMETERS: p_mintvl RADIOBUTTON GROUP rg4.
SELECTION-SCREEN COMMENT 35(40) text-sin FOR FIELD p_mintvl.
SELECTION-SCREEN END OF LINE.
Message selection interval
SELECTION-SCREEN BEGIN OF BLOCK msgfilt WITH FRAME TITLE text-msf.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(10) text-icr.
SELECTION-SCREEN COMMENT 14(05) text-ifr.
SELECTION-SCREEN COMMENT 25(05) text-dat FOR FIELD p_stadat.
Select messages - start date
PARAMETERS: p_stadat TYPE d.
SELECTION-SCREEN COMMENT 46(05) text-tim FOR FIELD p_statim.
Select messages - start time
PARAMETERS: p_statim TYPE t.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 14(05) text-ito.
SELECTION-SCREEN COMMENT 25(05) text-dat FOR FIELD p_enddat.
Select messages - end date
PARAMETERS: p_enddat TYPE d DEFAULT sy-datum.
SELECTION-SCREEN COMMENT 46(05) text-tim FOR FIELD p_endtim.
Select messages - end time
PARAMETERS: p_endtim TYPE t DEFAULT sy-timlo.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK msgfilt.
SELECTION-SCREEN END OF BLOCK prcopt.
SELECTION-SCREEN BEGIN OF BLOCK testopt WITH FRAME TITLE text-tso.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(10) text-tst.
SELECTION-SCREEN POSITION 33.
List only, no updates
PARAMETERS: p_lstonl RADIOBUTTON GROUP rg5 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(14) text-tsl FOR FIELD p_lstonl.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 33.
Execute updates
PARAMETERS: p_update RADIOBUTTON GROUP rg5.
SELECTION-SCREEN COMMENT 35(14) text-tsu FOR FIELD p_update.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK testopt.
*eject
INITIALIZATION. -
Error while generating form 16 in portal - Screen output without connection
Dear Gurus,
We are facing error while generating form 16 through portal and getting the below error in portal.
Screen output without connection to user. error key: RFC_ERROR_SYSTEM_FAILURE
When we checked for dumps in R/3 the following dump is coming:
DYNPRO_SEND_IN_BACKGROUND with error message :
Message class : FPRUNX
Message number: 102: No job started.
Then we tried to execute the form 16 through R/3 itself using tcode PC00_M40_F16 after putting in the relevant values in the selection screen and then press on PRINT FORM button, but surprisingly the system logs out without giving any error or dump.
We tried doing it repeatedly and once in these attempts we got an error saying Initialization of font server module failed.
We are not getting clue as to why this is happening. <<Text removed>>
Regards
Edited by: Matt on Jul 27, 2011 9:50 AMDear,
This might be the problem of Adobe Acrobat Reader. what is the version of Adobe you are using ?? If it 9.0, then uninstall it and reinstall 8.0 and then check .
Could you please check your installed SAPGUI component? If component 'Engineering Client Viewer' is installed, please uninstall
it. And try to call same transaction again.
BR, Deepak -
Error while generating screens in BDT
Hi All,
I getting following error while generating screens using t-code BUSP for a CAA2 t-code
"Client 040 appl.object REWB screen REWB10:Error during subscreen container gener
Message no. R11520
Diagnosis
Errors have occurred during screen generation. The reasons for this could be:
The maximum length of the screen was exceeded. There may be no more than 199 lines per subscreen container.
The maximum number of lines for the header-data area was exceeded. There may be no more than 15 lines in the header-data section.
Procedure
Check both of these potential sources of errors in the relevant screen, and make the necessary changes.
Could some body help me in this regards?
with regards,
SumanthHi,
For a dynpro there are 199 Lines available for screen elements and on the average the restriction of 10 views per section and 10 sections per screen. Just check this.
Thanks and warm regards,
Smita. -
Error while generating PDF in portal but not in WAD
Hi,
When I execute the command to export to pdf, I have a screen to fill settings of my pdf, then I valid my choice and I have this message : "Error while generating PDF" in my portal.
However, when I want to execute on Web Application Designer and click on my command "export to pdf", I have a same screen and I can open or save my document.
Is someone have an idea : why it is possible to generate my pdf on WAD but not in my portal ??
Any information is much appreciated !
Thanks in advance
V.K.Hi Pradnya,
Thanks for your answer. However it is for an old version of SAP NetWeaver..
I work with SAP BI 7.0 version.
Regards,
V.K. -
Error in calling a selection-screen...
Hello experts,
Please look at my code below:
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_upld RADIOBUTTON GROUP grp2.
SELECTION-SCREEN COMMENT 2(20) text-007 FOR FIELD pr_upld.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 03(15) text-a11 FOR FIELD p_flnme.
PARAMETERS: p_flnme LIKE rlgrap-filename DEFAULT 'C:'.
SELECTION-SCREEN END OF LINE.
PARAMETERS: pr_list1 RADIOBUTTON GROUP grp2.
SELECTION-SCREEN COMMENT 2(7) text-003 FOR FIELD pr_list1.
SELECTION-SCREEN END OF SCREEN 500.
SELECTION-SCREEN BEGIN OF SCREEN 1500 AS WINDOW.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(22) text-002 FOR FIELD p_dcode.
PARAMETERS: p_dcode LIKE vbak-kunnr,
p_name1 LIKE kna1-name1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_list2 RADIOBUTTON GROUP grp.
SELECTION-SCREEN COMMENT 2(7) text-003 FOR FIELD pr_list2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_add RADIOBUTTON GROUP grp.
SELECTION-SCREEN COMMENT 2(3) text-005 FOR FIELD pr_add.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_edit RADIOBUTTON GROUP grp.
SELECTION-SCREEN COMMENT 2(4) text-006 FOR FIELD pr_edit.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 03(20) text-a12 FOR FIELD p_code.
PARAMETERS: p_code LIKE zts0001-cdseq.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF SCREEN 1500.
IF v_compflag EQ space.
CALL SELECTION-SCREEN 500.
ELSE.
CALL SELECTION-SCREEN 1500.
ENDIF.
Now, what I want to do is that the program will call a selection-screen based on a given variable(v_compflag). But its generating an error saying that 'error generating the selection-screen'. Why is this so?
Again, thank you guys and take care!Corrected code.
REPORT ztest_errror .
data: v_compflag.
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_upld RADIOBUTTON GROUP grp2.
SELECTION-SCREEN COMMENT 2(20) text-007 FOR FIELD pr_upld
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 03(15) text-a11 FOR FIELD p_flnme.
PARAMETERS: p_flnme LIKE rlgrap-filename DEFAULT 'C:'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_list1 RADIOBUTTON GROUP grp2.
SELECTION-SCREEN COMMENT 2(7) text-003 FOR FIELD pr_list1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF SCREEN 500.
*************SELECTION-SCREEN BEGIN OF SCREEN 1500 AS WINDOW.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(22) text-002 FOR FIELD p_dcode.
PARAMETERS: p_dcode LIKE vbak-kunnr,
p_name1 LIKE kna1-name1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_list2 RADIOBUTTON GROUP grp.
SELECTION-SCREEN COMMENT 2(7) text-003 FOR FIELD pr_list2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_add RADIOBUTTON GROUP grp.
SELECTION-SCREEN COMMENT 2(3) text-005 FOR FIELD pr_add.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_edit RADIOBUTTON GROUP grp.
SELECTION-SCREEN COMMENT 2(4) text-006 FOR FIELD pr_edit.
SELECTION-SCREEN END OF LINE.
*************SELECTION-SCREEN END OF SCREEN 1500.
IF v_compflag EQ space.
CALL SELECTION-SCREEN 500.
ELSE.
CALL SELECTION-SCREEN 1500.
ENDIF.
Regards
vijay -
Displaying error message while entering selection screen fields
Moderator message: don't offer points
hi experts...
i generated a report.
in that report, the selection screen fields are plant and material type..
now my rqmt is like this :
if user enters any plant except '8210' in the selection screen, then a pop up should appear like.. enter 8210 plant only, and the cursor should remain in the same screen allowing user to enter correct plant.
and then same with the case of material type also..user should enter 'mcfe' material type only..
im using message classes like this:
if so_bwkey-low ne '8210' or so_bwkey-high ne '8210'.
message i000(zts).
endif.
if so_mtart-low is not initial and so_mtart-high is not initial and so_mtart-low ne 'mcfe'
or so_mtart-high ne 'mcfe'.
message i001(zts).
endif.
with this logic, when i enter plant..it is prompting
1) enter plant 8210 only..
and then when i press enter key it is again prompting
2)enter material type mcfe only..
but iam not entering material type here..
i want to get 2nd error message if and only if i enter material type..
help me regarding this issue..
<<text removed>>
thanks in advance,
harini.
Edited by: Matt on Feb 9, 2009 10:14 AMHi,
Use Error type message in SELECTION SCREEN EVENT.It will place the cursor in the relevant Field.
At SELECTION-SCREEN ON SO_BWKEY-Low.
if so_bwkey-low ne '8210' .
message E000(zts).
endif.
At SELECTION-SCREEN ON SO_BWKEY-HIGH.
if so_bwkey-high ne '8210'.
message E000(zts).
endif.
At SELECTION-SCREEN ON so_mtart-LOW.
if so_mtart-low is not initial and so_mtart-low ne 'mcfe' .
message E001(zts).
endif.
At SELECTION-SCREEN ON so_mtart-HIGH.
if so_mtart-high is not initial
and so_mtart-high ne 'mcfe'.
message E001(zts).
endif.
This will resolve the issue..
Regards,
Gurpreet -
An error that "error while generating pdf".
Hi gurus,
when i am trying to generate a pdf from phap_admin (appraisal document ) i am getting an error that "error while generating pdf".
the dump in st22 is
ERROR ANALYSIS:
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_SEND_DYNPRO_NO_RECEIVER', was
not caught and
therefore caused a runtime error.
The reason for the exception is:
During background processing, the system attempted to send a
screen to a user.
Current screen: " " " ".
SOURCE CODE:
screen to enter order-number ***************************************
IF w_suppress_dialog EQ space.
set popup to the foreground.
CALL FUNCTION 'SAPGUI_SET_PROPERTY'
DESTINATION 'SAPGUI'
EXPORTING
property = 'ACTIVATE'
value = 'X'
EXCEPTIONS
OTHERS = 1.
CALL SCREEN 300 STARTING AT lv_start_column lv_start_row.
>>>> ELSE.
process the same forms which are processed on screen 0300.
ATTENTION: Whenever functionality of screen 0300 is extended,
make sure that necessary calls are also made here!
PERFORM d0300_read_data.
PERFORM d0300_comline.
ENDIF.
CASE w_next_action.
WHEN 'ATTR'.
PERFORM show_object_attributes USING wt_e071[].
CAN ANY ONE HELP TO SOLVE THIS???Hi,
the dump says:
CALL SCREEN 300 STARTING AT lv_start_column lv_start_row.
>>>> ELSE.
This means, the raise of the exception comes from the command before ELSE and this is CALL SCREEN.
CALL SCREEN is only reachable. if w_suppress_dialog is SPACE. It can't be 'X'.
You have to find a way to set it to 'X'.
Regards,
Klaus -
Syntax error in generated report
Hi,
I execute a transactions say VB21 and enter the sales org data and when i click the copy button, the processing takes place and finally i get a dialog that shows the generated log messages and which shows details like this..
status mesage Note
information 801 report rv13a944 generated
information 802 screen sapmv13a 2944 generated
errors 888 report rv13a921 has a syntax error
and so on.
Whats this transaction about ? and how do i debug the syntax error in the generated report ? Is this report generated out of ABAp query ? How do i trace this ? Any help ?
thksMaybe OSS [Note 702045 - Conditions: Syntax error in program RV13Axxx|https://service.sap.com/sap/support/notes/702045]
Regards -
Error when generating the text environment
Hi Friends,
When iam logging on to SAPGUI iam able to lauch the gui but no text elements are being displayed the screen is completely blank and when i try to execute any transaction or perform any action.. the following error is getting displayed.
Err:sapgui:620
Error when generating the text Environment.
Please provide me the necessary help.
Regards
KhaiserHi,
Just a suggestion (not sure it will work) - upgrade your SAPGui to the latest one e.g. 7.10 or patch it.
Do you see text elements if accessing the sytem using DE language ?
Regards,
Mike -
Hi SAP Techies,
I am getting the following error while generating a role,
"18 field value(s) for object K_CCA were not entered in the profile"
Can you please provide me a solution to fix this problem.
Thanks.
Regards,
AgustussHow many cost centres are you putting in the role? Do you have cost centre set as an org level?
From your User Name I assume that you are at the BBC...Do you still use a program to populate the cost centres in the role based on the cost centre group names? If so it is possible that you are trying to put too many cost centres in the field and the the profile will not generate because of this (we had it back in 2001 when I was working there).
Do you have the technical error message details?
Maybe you are looking for
-
A Bug in 11.1 array interface
I have just encounter some code that runs fine in Oracle 9 to 10 but in 11.1 I am getting a different result. basically I have this SQL "INSERT INTO $table ( row_1, row_2, row_3) VALUES (?,?,?)" and bind all three to this array @var2 = (2,2,2,2,'s',2
-
Form doesn't exists after calling driver program
Hi, I had created a invoice form, and i called through driver program in se38.After executing i m getting as 'Form doesn't exists'. 'zinvoice1' is the name of the smartform. Code as follows: REPORT ZINVOICE1. tables: kna1,vbrp,vbrk. parameter
-
Need a Free designing program. for example: something to help me make shirt
Need a Free designing program. for example: something to help me make shirt graphics, posters, and other designs. i do not think my mac came with any such program. i have ilife 08 but i dont think anything there can help me?
-
How to convert the 3.x ABAP Routines into BI 7 ABAP Routines
Hi All, I am trying to convert a BI 3.x data flow into BI 7 data flow suing DTP's. But i am stuck at Transformations. We have used several Routines in 3.X data flow and those routines are not converted automatically into the new data flow. Is there a
-
"**Fail to create VM" log files??
Hi, I am building a dual boot laptop for demonstration and learning purposes. I have successfully installed the virtual server and I'm trying to load the OV Manager template. After the user questionnaire (network, serverpool questions, etc etc) it un