Error in generating code combinations

hello there.
i have defined the cross validation rules in general ledger and i when tried to implement them, i got the following error.
app-fnd-01238.cannot set value for field lines.code_combination_id
please help me
thanks and regards

Hi;
What is EBS version?
Please see:
GLXJEENT: Saving Manually Added Lines on Journal Entry gets Error APP-FND-01238 [ID 397442.1]
Regard
Helios

Similar Messages

Error while generating code in brf+ function

Hi all,
i am getting error while generating code in function in bRF+
am using weight fields ..if i dont use quantity fields am able to generate code .
please help.
Thanks.

Can you provide more details? What exactly is the error?
I think we have provided a note for the issue. With the details it should be possible to identify the note number.

Error in generated code :Component Interface

Hi All,
I have my webdynpro component active works fine in Dev Server.
When we move it to qualtiy we got a strange error " Error in Generated Code, Type Z*IWCI is unknown.
Its related to the Component interface which gets generated automatically while any WDA is created but in our system it isnt getting generated?
Looking for your valuable comments on ths
Regards
Bhanu

Hi Bhanu,
Goto se09 check for that request ICF service is generated or not? I think you first created in $TMP and assigned package.
If ICF service is not available, just copy it to new comp, it will create new ICF service. I dont know this is the solution,
just a guess.
Cheers,
Kris.

Syntax Error in Generated Code

Hi All,
I am facing the syntax error in WD4A.
Web Dynpro Comp. / Intf. Z_PO_REQUEST,Web Dynpro Component Controller COMPONENTCONTROLLER
Error in Generated Code
The type "ZIWCI_PO_Request" is unknown, but there is a type with the
similar name "IG_Z_PO_REQUEST". "IG_Z_PO_REQUEST". "IG_Z_PO_REQUEST".
Any Suggestions to fix this?.
Thanks in Advance,
Rajen.

Hi All,
I am facing the syntax error in WD4A.
Web Dynpro Comp. / Intf. Z_PO_REQUEST,Web Dynpro Component Controller COMPONENTCONTROLLER
Error in Generated Code
The type "ZIWCI_PO_Request" is unknown, but there is a type with the
similar name "IG_Z_PO_REQUEST". "IG_Z_PO_REQUEST". "IG_Z_PO_REQUEST".
Any Suggestions to fix this?.
Thanks in Advance,
Rajen.

OWB Error while generating Code for a mapping

I have a simple mapping loading from a source to a flat file. When I try to generate code it gives me the following Error
VLD-2357: Target Data File name not specified for file <target Flat file name>.
I am new to OWB so any help on the same will be greatly appreciated. How can I specify target Data File name in the mapping configuration under Flat file operators
Thanks
Anish

If you configure the mapping in the UI from the main design tree and select the name of your file operator under the tree node 'Flat File Operators' on the right hand side panel the properties should be displayed - one of these properties is 'Target Data File Name', enter the name of your target data file name.
Cheers
David

Error while generating code for deployment

I am getting the following error:
Error generating findTest1ByMarks(java.lang.Integer) query for Bean Test1(Abstract scheme name=Test1) Error=query cannot be pushed down
Query="select ..."
Could someone help me?
I am trying to generate code of Container Managed Entity Bean in WSAD 5.0.
Thanks

If you configure the mapping in the UI from the main design tree and select the name of your file operator under the tree node 'Flat File Operators' on the right hand side panel the properties should be displayed - one of these properties is 'Target Data File Name', enter the name of your target data file name.
Cheers
David

J2EE deploytool compile error in generated code.

I write and compile all the code for EJB.
Created .EAR and .WAR files needed for deploy. But when the deploy application tries to generated and compile stub code there is a compilation problem.
Anyone knows how can I solve this? or this is a problem of the deploy app, Is there another one?
I'm using J2EE SDK 1.3 beta version.
THANKS...

It's not an Exception. Are compile errors of the generated code.
When you make "Deploy..." from "Tools" menu item of the "Application Deployment Tool", it make some task including source generation and its compilation, so, this compilation have errors.

Error while deploying generated code from sup to iPhone

Hi
I generated the code using Sap unwired platform for Objective-c. I followed the steps specified in the below link
http://infocenter.sybase.com/help/index.jsp?topic=/com.sybase.infocenter.dc01213.0153/doc/html/mqu1264543829068.html
for deploying the generated code into iPhone simulator, i am getting the following error
Undefined symbols:
"_OBJC_CLASS_$_SUPEntityAlias", referenced from:
objc-class-ref-to-SUPEntityAlias in SUP101_Customer.o
objc-class-ref-to-SUPEntityAlias in SUP101_LogRecordImpl.o
Can any one help me in this
Edited by: KiranSanka on Dec 2, 2010 1:18 PM
Edited by: KiranSanka on Dec 3, 2010 7:26 AM

Hi
While compiling did you get a warning? something along the line "missing required architecture i386 in fileu201D? if so refer this link http://stackoverflow.com/questions/1456185/build-error-missing-required-architecture-i386-in-file
Regards
Jinesh

Error In CMP Generated Code

I have a CMP 2.0 local entity bean, and when I try to create one from a session bean, I get this:
java.lang.IllegalStateException: Can not call getPrimaryKey() inside ejbCreate(...) methods, the entity does not have an identity yet, see the EJB 2.0 specification chapter 10.5.4
     at com.evermind.server.ejb.EJBUtils.throwGetPrimaryKeyInEJBCreateException(EJBUtils.java:963)
     at WebLine_EntityBeanWrapper2.getPrimaryKey(WebLine_EntityBeanWrapper2.java:2595)
     at WebLineHome_EntityHomeWrapper16.create(WebLineHome_EntityHomeWrapper16.java:497)In other words, the generated code for the home's create method is calling getPrimaryKey on the generated code for the entity, and this is failing because even the container can't call getPrimaryKey at that time. It doesn't seem to matter what's in my ejbCreate method, unless it throws an exception (which prevents this problem, of course). Looks like a problem with the generated code to me.

Thanks for that tip. Looking at the generated code, I see:
          boolean imIt = false;
          try
            while(!imIt)
              if(com.evermind.server.ApplicationServer.DEBUG) debug("In while(!imIt)\n");
              WebLine_EntityBeanWrapper2 other;
              other = (WebLine_EntityBeanWrapper2)getWrapperInstance(response.getPrimaryKey(), 90000l, false);That last line is where the error happens (line 520 in the stack trace above). It seems like getPrimaryKey is being called intentionally, to see if the entity is already in the cache or something? Anyway, the generated code for the instance call is:
public Object getPrimaryKey()
    if(this.primaryKey == null) com.evermind.server.ejb.EJBUtils.throwGetPrimaryKeyInEJBCreateException();
    return this.primaryKey;
}So that seems reasonable, I suppose. The question is, what is causing the instance to have no PK when the home thinks the PK should be there? I've tried a lot of variants of my code, with no improvement, but I could still be doing something wrong. Also, it only seems to be happening with one bean...

Expand Operator generates code errors in OWB 10g2 map

I suspect that there are few people that actually use the Expand Operator in OWB from the lack of threads in this forum; however I'll give this a shot.
I have a map function that returns a user-defined object type which I then use an Expand Operator to break into its component data parts. The function works Ok. The map validates Ok. The code generates Ok. However, on deployment the map generates errors:
ORA-06550: line 768, column 97:
PLS-00103: Encountered the symbol "." when expecting one of the following:
* & = - + < / > at in is mod remainder not rem then
<an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_
LIKE4_ LIKEC_ between overlaps || multiset year DAY_ member
SUBMULTISET_
The symbol "* was inserted before "." to continue.
Compiling the package body in SQL developer, I can spot the exact lines that produce this error, so I know it's coming from the Expand Operator's generated code. In every case, the Expand Operator is producing lines like this (code generalized):
(("[function_name]"("[map_name]"."[map_input_parameter]"))).BYTES_COUNT
(("[function_name]"("[map_name]"."[map_input_parameter]"))).ROWS_INSERTED
BYTES_COUNT and ROWS_INSERTED are data components of the user_defined object type returned by the function.
The problem is the # of parentheses surrounding the function name and the returning component being outside these parentheses. If I move the returning component in between the first and second closing parentheses, the code will compile:
(("[function_name]"("[map_name]"."[map_input_parameter]"*).BYTES_COUNT))*
(("[function_name]"("[map_name]"."[map_input_parameter]"*).ROWS_INSERTED))*
IMO, this is an OWB bug !! The Expand Operator can't be used without editing the code after deployment.

Unfortunately breaking apart the user-defined type in an Expression Operator produces the same error message and virtually the same code problem:
(([function_name]("[map_name]"."[input_parameter]")).BYTES_COUNT/* EXPRESSION.OUTGRP1.BYTES_COUNT */)
As in the Expand Operator the line above compiles when the data type component ("BYTES_COUNT") is manually moved between the first and second closing parentheses:
(([function_name]("[map_name]"."[input_parameter]").BYTES_COUNT/* EXPRESSION.OUTGRP1.BYTES_COUNT */) )

Errors in automatically generated code

I am creating an application in dyn pro and i have got errors at the code which is generated by dyn pro automatically. I have imported the zip file TutWD_EJBinWD_Init .The errors are generated on the following lines.
private final com.sap.tc.webdynpro.progmodel.api.IWDViewController wdControllerAPI;
private final com.sap.tc.webdynpro.progmodel.api.IWDComponent wdComponentAPI;
this.wdControllerAPI = wdThis.wdGetAPI();
this.wdComponentAPI = wdThis.wdGetAPI().getComponent();
public void onActionSubmit(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
public void onActionReset(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )

Hello Nikhil,
so in fact that u can access the WD API i think that something went wrong when you have importet the tutorial.
In fact that it is an tutorial i do not think that there is any error inside it and i dont think that you have to check all the code for any errors.
I think maybe you have choosen a diffrent packe or application name while creating the application and now after the import the package qualifier or the application name or anything like this does not match with the tutorial code.
Was there any information which name and packages do you have to use for the tutorial?
Where can i download the tutorial? Did you have an link so that i'm able to import it in my development workplace. It would be easier for me to find the error.
kind regards
Fabian

How to find code responsible Error Message generated in MIRO transaction

Hi Gurus,
                I have to find the code responsible for generating ERROR message in Miro tcode through DEBUGGING. Let me tell you the case...................
In MIRO,
We input
In Basic data tab,
Invoice Date,
Posting Date,
Reference,
PO no. &
Tax code as V5 ( VAT @ 8% ) in item data & then
In Details tab,
We enter Business Area    & then
In Payment Tab
Baseline date        & then
In Basic data tab
We check the check box for Calculate tax &
entered Amount     & then click entered .
It displays GREEN button.
When we click Simulate button & click post then it shows 1 message that " Invoice document still contains messages .".
And then if we click Messages Button it shows " MSG No. & text - Enter Bussiness area ."
So the problem is though we input Business Area , still it shows message Enter Business area.
So plz tell me how to find that code responsible for error message.

Ashish- It is because, the error message is called using function module / BAPI. But Ideally when a developer codes to populate the structure of type BAPIRET2, he.she should also follow the following rule, to make the message traceable:
"Populate BAPI structure for error message
"Following code will not get called, but is for documentation for traceability.
if 1 = 2.
message e004.
endif.
That is why i said in my comment, if it is "coded properly" then we will be able trace
Bottom line: you will not be able to find the program line using this approach.
But now since you now the error message and number, you can go to the underlying program of MIRO (SAPLMR1M and SAPLFDCB)..click on the find button on the application toolbar, enter the message# and find..PLEASE SELECT THE RADIO BUTTON "In the main program".
Hope this helps.
Sajan Joseph.

Error:APP-FND-00906: You can only query existing flexfield code combination

Hi,
when i am querying the particluar account combination under Budget Journals (Navigation: GL responsibility> Budgets > Enter > Journals) window the following message is displaying by the system
APP-FND-00906: You can only query existing flexfield code combinations. You entered query criteria in your flexfield that does not identify an existing code combination. Therefore, your query will not return any rows.
Enter a valid code combination, or enter only the flexfield segment values you know, or do not enter any values in the flexfield.
Note: We are using the 11.5.10.2 version.
Can any one why this error message is displaying by the system.
Regards,
Kevin.

Kevin,
Review the following documents, and see if it helps.
Note: 365406.1 - GLXIQACC Account Inquiry Is Failing With APP-FND-00906 Can Only Query Existing Flexfield Code Combination
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=365406.1
Note: 272773.1 - APP-FND-00906 - You Can Query Only Existing Flexfield Combinations on the Enter Budgets form
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=272773.1
Note: 199674.1 - 11i - GLXIQBUD - Unable To Inquire Budget Account In The Budget Inquiry Form
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=199674.1
Regards,
Hussein

Error in Abap code when combining data from two tables

Hi,
I got error in my code when i try to select data based on two tables
error message Unknown column name "(" field list. field list. field list. field list.
select ( WLK1~ARTNR )
          into ZOXE1D0041-ZZPROMO
          from WLK1 INNER JOIN T001W
          ON WLK1FILIA = T001WKUNNR.
          where WLK1-PFLKN NE 'P' AND
          WLK1-QUELL NE '2'.
Table 1 WLK1
ARTNR   FILIA       PFLKN                  QUELL
001         C001        P                           2
002         C001        A                          1
Table 2 T001W
KUNNR                WERKS
C001                    P001
My requirement is to extract from article number from table WLK1 where the customer number (FILIA) matches with Customer number from (T001W) and plant (WERKS).
In conclusion I like to have this only this row
ARTNR   FILIA       PFLKN                  QUELL
002         C001        A                          1

Hi
You need to append every article number after each select is performed
is this an intermal table ZOXE1D0041 with header line ? if yes
then do this way
select WLK1~ARTNR
into ZZARTICLE
from WLK1 INNER JOIN T001W
ON WLK1FILIA = T001WKUNNR
where WLK1~PFLKN NE 'P' AND
WLK1~PFLKN NE 'S' AND
WLK1~QUELL NE '2'.
ZOXE1D0041-ZZLISTARTICLE = ZZARTICLE.
Append ZOXE1D0041. " <edited>
endselect.
then ZOXE1D0041 will have all article numbers.
Edited by: Sonal Patel on Sep 5, 2009 10:27 AM

RUNTIME ERROR IN GENERATED PROGRAM. Overflow converting ''

Hi,
While executing the below code i am getting the error
" RUNTIME ERROR IN GENERATED PROGRAM. Overflow converting ' ' am new to ABAP , can anyone kindly help me where i have went wrong ? .
IF ( V_DO_CDS_NAME_MAIN <> '' ).
    ABAP.
        DATA: ref_it_tab TYPE REF TO data,
              ref_wa TYPE REF TO data.
        FIELD-SYMBOLS: <fs_itab> TYPE ANY TABLE.
        FIELD-SYMBOLS: <fs_wa> TYPE ANY.
        FIELD-SYMBOLS: <fs_field> TYPE ANY.
        CREATE DATA ref_it_tab TYPE STANDARD TABLE OF (V_DO_CDS_NAME_MAIN) WITH NON-UNIQUE DEFAULT KEY.
        ASSIGN ref_it_tab->* TO <fs_itab>.
        SELECT * FROM (V_DO_CDS_NAME_MAIN) INTO TABLE <fs_itab> where C1 = V_WORK_ITEM_ID_MAIN.
        CREATE DATA ref_wa LIKE LINE OF <fs_itab>.
        ASSIGN ref_wa->* TO <fs_wa>.
        loop at <fs_itab> assigning <fs_wa>.
            assign component 'CLIENT' of structure <fs_wa> to <fs_field>.
            V_CLIENT = <fs_field>.
            assign component 'C0' of structure <fs_wa> to <fs_field>.
            V_C0 = <fs_field>.
            assign component 'C1' of structure <fs_wa> to <fs_field>.
            V_C1 = <fs_field>.
            assign component 'C2' of structure <fs_wa> to <fs_field>.
            V_C2 = <fs_field>.
            assign component 'C3' of structure <fs_wa> to <fs_field>.
            V_C3 = <fs_field>.
            assign component 'C4' of structure <fs_wa> to <fs_field>.
            V_C4 = <fs_field>.
            assign component 'C5' of structure <fs_wa> to <fs_field>.
            V_C5 = <fs_field>.
            assign component 'C6' of structure <fs_wa> to <fs_field>.
            V_C6 = <fs_field>.
            assign component 'C7' of structure <fs_wa> to <fs_field>.
            V_C7 = <fs_field>.
            assign component 'C8' of structure <fs_wa> to <fs_field>.
            V_C8 = <fs_field>.
            assign component 'MESSAGE_ID' of structure <fs_wa> to <fs_field>.
            V_MESSAGE_ID = <fs_field>.
            assign component 'TIMESTAMP' of structure <fs_wa> to <fs_field>.
            V_TIMESTAMP = <fs_field>.
            assign component 'EXTRACTKEY' of structure <fs_wa> to <fs_field>.
            V_EXTRACTKEY = <fs_field>.
            assign component 'STATEID' of structure <fs_wa> to <fs_field>.
            V_STATEID = <fs_field>.
            assign component 'DEVICE_ID' of structure <fs_wa> to <fs_field>.
            V_DEVICE_ID = <fs_field>.
        ENDLOOP.
    ENDABAP.
ENDIF.

Hi Mubeen,
While Copying the cotes have come closer otherwise its working fine , i was able to find the error .
There are ten predefined ABAP data types. There are 100 possible type combinations between these elementary data types. ABAP supports automatic type conversion and length adjustment for all of them except type D (date) and type T (time) fields which cannot be converted into each other.
I commented the TimeStamp part where i had given the ABAP Type as D and it started working .
But now i want to display the content of "TimeStamp" field but i am not able to do so .
This is the format in which it has to be displayed 2009.011.915.3353.
Which ABAPTYPE i need to use ?.
i am able to display in this format 20090119153353
regards
Harsha

Error in generating code combinations

Similar Messages

Maybe you are looking for