Error in generating Excel using EXCEL_OLE_STANDARD_DAT

Hi,
While generating an Excel using EXCEL_OLE_STANDARD_DAT, the files are getting genrated but it also gives an
"OLE_OBJECT_METHOD_ERROR" (only on some PC's).
Why do we get this error and how will I be able to resolve it ?
Thanks in advance,
Archana

Hi Archana,
Have a look at OSS Notes 104165 and 691875. Hope these notes give some inputs.
Thanks
Lakshman

Similar Messages

  • Webutil error while generate excel form

    Hi
    In my forms appl. I use webutil in order to generate excel reports
    I have to midtier instances both running on a separate host.
    End users connect through a WLB frontend.
    At one of the midtiers, when generating a excel report using webutil "error while running kit"
    No errors appear in any log on the midtier. On a log table in the database ORA-12703 appears but I'm not sure if thats related.
    On the other midtier, with the same compiled forms using the same database it works fine.
    Does anyone have a clue?
    reg.
    Michel

    Hi
    Are you talking about adobe forms or smartforms. These are 2 different types of forms. For Adobe forms you need an ADS which sits on the java stack and needs to be configured properly. Some services need to be activated in SICF for the configuration as well. A conplete guide on how to configure the ADS is found on the following link
    [https://www.sdn.sap.com/irj/sdn/adobe?rid=/webcontent/uuid/90355269-4d89-2a10-0bb9-f388704f1dcd]
    Regards
    Thashin

  • Error while generating JAR using adadmin

    Hi all,
    EBS Version: R12.1.1
    I am in the middle of migrating the EBS from windows 2003-32bit to Linux 5-64Bit.
    I am getting the below error while generating the JAR files using adadmin.
    Error generated in adadmin
    Signing product JAR files in  JAVA_TOP -
      /u01/appltest/TEST/apps/apps_st/comn/java/classes
       using entity TEST_vm1213l and certificate 1.
    Successfully created javaVersionFile.
    Generating product JAR files in JAVA_TOP -
      /u01/appltest/TEST/apps/apps_st/comn/java/classes with command:
    adjava -mx512m -nojit oracle.apps.ad.jri.adjmx @/u01/appltest/TEST/apps/apps_st/appl/admin/TEST/out/genjars.cmd
    Failed to generate product JAR files in JAVA_TOP -
       /u01/appltest/TEST/apps/apps_st/comn/java/classes.
    adogjf() Unable to generate jar files under JAVA_TOP
    Backing up restart files, if any......Done.
    You should check the file
    /u01/appltest/TEST/apps/apps_st/appl/admin/TEST/log/gen_jar.log
    for errors.
    Entries from gen_jar.log
    Reading language information from applUS.txt ...
      Temporarily resetting CLASSPATH to:
      "/u01/appltest/TEST/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/appltest/TEST/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/appltest/TEST/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/appltest/TEST/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/appltest/TEST/apps/apps_st/comn/java/lib/appsborg.zip:/u01/appltest/TEST/apps/tech_st/10.1.2/forms/java:/u01/appltest/TEST/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/appltest/TEST/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/appltest/TEST/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/appltest/TEST/apps/apps_st/comn/java/classes"
      Calling /u01/appltest/TEST/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
    The JDK version is 1.6.0_10
    Validating the files/directories specified for -areas option
    ERROR: File/directory 61A9A14779A1A8 does not exist
    ERROR: File/directory -keyPass does not exist
    ERROR: File/directory AA65D2F9B26DDBABEF33 does not exist
    ERROR: File/directory -storePass does not exist
    ERROR: File/directory -keysEncrypted does not exist
    Validating the files/directories specified for -outputSpec option
    Validating the directory specified for -lstDir option
    Error(s) have occurred; exiting with status 1
    Failed to generate product JAR files in JAVA_TOP -
       /u01/appltest/TEST/apps/apps_st/comn/java/classes.
    Kindly provide some inputs to troubleshoot further.
    If you need further details, kindly let me know.
    Regards,
    Krish.

    Hi all,
    I have applied the consolidated JRI fixes - patch 17191279 .
    Then, when generating Jar, received keypass is tampered error.
    re-generated the key using $ adjkey -initialize.
    Now, its working fine.
    Regards,
    Krish.

  • Error while generating webservices using Date

    I am facing the following problem while generating a web service which is having Date as one its members.
    I have serialized a class with the following DataStructure
    private String rowId1;
    private Date created;
    private String name;
    private String quoteNum;
    private String revNum;
    private String curcyCd;
    private String activeFlg;
    private Number discntAmt;
    private Number discntPercent;
    When i tried to expose this as webservice, If I use the class oracle.jbo.domain.Date for Date type, the webservice is not generated properly. It is not including the method which contains this call. ie) This method is not present in the WSDL file as well as in the proxy.
    When I used java.util.Date instead of oracle.jbo.domain.Date, I am able to expose the method and webservice got generated properly. But When i tried to generate the proxy for the WSDL in the consumer, I go the following error.
    oracle.jdeveloper.webservices.model.GenerationException: Proxy generation failed for the following reason:
         at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator.doGeneration(ProxyGenerator.java:608)
         at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator.generateImpl(ProxyGenerator.java:365)
         at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator.mav$generateImpl(ProxyGenerator.java:77)
         at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator$1ThrowingRunnable.run(ProxyGenerator.java:206)
         at oracle.jdeveloper.webservices.model.GeneratorUI$GeneratorAction.run(GeneratorUI.java:446)
         at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:551)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.lang.RuntimeException: generator error: no encoder for type "{http://www.w3.org/2001/XMLSchema}dateTime" and Java type "java.lang.String"
         at oracle.j2ee.ws.common.processor.Processor.runActions(Processor.java:105)
         at oracle.j2ee.ws.tools.wsa.AssemblerTool.run(AssemblerTool.java:99)
         at oracle.j2ee.ws.tools.wsa.WsdlToJavaTool.createProxy(WsdlToJavaTool.java:354)
         at oracle.j2ee.ws.tools.wsa.Util.createProxy(Util.java:838)
         at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator.doGeneration(ProxyGenerator.java:549)
         ... 6 more
    Caused by: generator error: no encoder for type "{http://www.w3.org/2001/XMLSchema}dateTime" and Java type "java.lang.String"
         at oracle.j2ee.ws.common.processor.generator.GeneratorBase.doGeneration(GeneratorBase.java:181)
         at oracle.j2ee.ws.common.processor.generator.GeneratorBase.perform(GeneratorBase.java:137)
         at oracle.j2ee.ws.common.processor.Processor.runActions(Processor.java:97)
         ... 10 more
    I am referring to "Entity and view objects based on web service " in the following URL
    http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html#93
    Thanks and Regards,
    James

    Hi all,
    I have applied the consolidated JRI fixes - patch 17191279 .
    Then, when generating Jar, received keypass is tampered error.
    re-generated the key using $ adjkey -initialize.
    Now, its working fine.
    Regards,
    Krish.

  • SharePoint 2007 - Invalid Token Error when Generating Excel Worksheet with ItemLevelAudit

    All,
    I have the AuditLevel project located here working on a test site:
    https://msdn.microsoft.com/en-us/library/office/bb397403(v=office.12).aspx#MOSS2007ItemLevelAudit_AuditingwithSharePointServer2007
    Since I'm a site collection admin - I can access a document and go to View Audit History.
    When I click the button to Generate Excel Document - if I've viewed the document I get the following error
    since I have a ' in my name - is this due to AD or can this be fixed in code - I did run a
    Replace ' with '' in each of the page loads on any aspx pages I saw
    string s = "'";
    string escaped = s.Replace("'","''");
    '//s:si[s:t='O'Neill, Kevin']' has an invalid token.   at MS.Internal.Xml.XPath.XPathParser.CheckToken(LexKind t)
       at MS.Internal.Xml.XPath.XPathParser.ParsePredicate(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParseStep(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParseRelativeLocationPath(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParseLocationPath(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParsePathExpr(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParseUnionExpr(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParseUnaryExpr(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParseMultiplicativeExpr(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParseAdditiveExpr(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParseRelationalExpr(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParseEqualityExpr(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParseAndExpr(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParseOrExpr(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParseXPathExpresion(String xpathExpresion)
       at MS.Internal.Xml.XPath.QueryBuilder.Build(String query, Boolean allowVar, Boolean allowKey)
       at MS.Internal.Xml.XPath.QueryBuilder.Build(String query, Boolean& needContext)
       at System.Xml.XPath.XPathExpression.Compile(String xpath, IXmlNamespaceResolver nsResolver)
       at System.Xml.XPath.XPathNavigator.Compile(String xpath)
       at System.Xml.XmlNode.SelectSingleNode(String xpath, XmlNamespaceManager nsmgr)
       at ItemAuditing.AuditLogWorkbook.XLInsertStringIntoCell(String sheetName, String addressName, String value)
       at ItemAuditing.AuditLogWorkbook.WriteCell(String celladdress, String cellvalue)
       at ItemAuditing.AuditLogWorkbook.WriteEntry(String User, String Occurred, String Event, String Version)
       at AuditLogWorkbookHandler.<>c__DisplayClass1.<ProcessRequest>b__0() in c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\LAYOUTS\AuditLogWorkbook.ashx:line 54
       at Microsoft.SharePoint.SPSecurity.CodeToRunElevatedWrapper(Object state)
       at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
       at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
       at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
       at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
       at AuditLogWorkbookHandler.ProcessRequest(HttpContext context) in c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\LAYOUTS\AuditLogWorkbook.ashx:line 30
       at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
       at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

    Hi Alan J Stewart,
    This issue may occur due to the column name in your scenario.
    Would you please change the column name: raised by column to “raised_by”, and export the list with this column, check whether the issue persists.
    I have seen similar issue that caused by the column name.
    Thanks,
    Qiao
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Qiao Wei
    TechNet Community Support

  • Error while generating excel report on citrix Metaframe

    Hi All,
    I have developed a form which generates excel on client server. At my work people are using citrix metaframe and when i try to open the same form on the citrix the host command does not work. Can any one help me with this issue.
    currently the host looks like this
    HOST('C:\Program Files\Microsoft Office\Office\EXCEL.EXE c:\sgir938.xls');
    Regards,
    Ritesh

    Is anyone having any idea about it...

  • Generating Excel using Client_ole2

    Hi
    I am using the following codde to generate excel file from form but when i click on button nothing happens and i can not exit the form also... please help me...
    thanks.....
    DECLARE
         A BOOLEAN;
         args client_ole2.list_type;
         application client_ole2.obj_type;
         vworkbooks client_ole2.obj_type;
         vdoc client_ole2.obj_type;
         vworksheet client_ole2.obj_type;
         vrange client_ole2.obj_type;
    BEGIN
    -- create app object
    application := client_ole2.create_obj('Excel.Application');
    client_OLE2.SET_PROPERTY(application, 'Visible','True');
    -- get workbooks object
    vworkbooks := client_ole2.get_obj_property(application, 'Workbooks');
    -- and open a file
    args := client_ole2.create_arglist;
    client_ole2.ADD_ARG(args, 'c:\tp_ae.xls');
    vdoc :=client_ole2.INVOKE_OBJ(vworkbooks,'Open',args);
    client_ole2.destroy_arglist(args);
    -- get a worksheet object
    -- for this to work you need to know the sheet name or its index
    args := client_ole2.create_arglist;
    client_ole2.ADD_ARG(args, 1); --<-- name or index
    vworksheet := client_ole2.get_obj_property(vdoc,'Worksheets',args);
    client_ole2.destroy_arglist(args);
    -- get a range object which in this case is just a cell
    -- for this to work you need to know the cell coordinates
    args := client_ole2.create_arglist;
    client_ole2.ADD_ARG(args, 'B6');
    vrange := client_ole2.get_obj_property(vworksheet,'Range',args);
    client_ole2.destroy_arglist(args);
    -- and here you get the value
    message(client_ole2.get_char_property(vrange,'Value'));
    -- release objects
    client_ole2.release_obj(vrange);
    client_ole2.release_obj(vworksheet);
    client_ole2.release_obj(vdoc);
    client_ole2.release_obj(vworkbooks);
    client_ole2.release_obj(application);
    END;

    hi
    if you want to export the data to excel then use the following code and the following code u can use any schema and it will export all data with headers.
    PROCEDURE fpr_forms_to_excel(p_block_name in varchar2 default NAME_IN('system.current_block'),
                                                                           p_path                in varchar2 default 'C:\',
                                                                           p_file_name      in varchar2 default 'Temp') IS
    -- Declare the OLE objects
         application                          OLE2.OBJ_TYPE;
         workbooks                               OLE2.OBJ_TYPE;
         workbook                                    OLE2.OBJ_TYPE;
         worksheets                               OLE2.OBJ_TYPE;
         worksheet                               OLE2.OBJ_TYPE;
         cell                                              OLE2.OBJ_TYPE;
         range                                         OLE2.OBJ_TYPE;
         range_col                               OLE2.OBJ_TYPE;
         -- Declare handles to OLE argument lists
         args                                           OLE2.LIST_TYPE;
         arglist                                     OLE2.LIST_TYPE;
         -- Declare form and block items
         form_name                               VARCHAR2(100);
         f_block                                    VARCHAR2(100);
         l_block                                    VARCHAR2(100);
         f_item                                         VARCHAR2(100);
         l_item                                         VARCHAR2(100);
         cur_block                               VARCHAR2(100):= NAME_IN('system.current_block');
         cur_item                                    VARCHAR2(100);
         cur_record                               VARCHAR2(100);
         item_name                               VARCHAR2(100);
         baslik                                         VARCHAR2(100);
         row_n                                         NUMBER;
         col_n                                         NUMBER;
         filename                                    VARCHAR2(1000):= p_path||p_file_name;
         ExcelFontId                          OLE2.list_type;
    BEGIN
              -- Start Excel
              application:=OLE2.CREATE_OBJ('Excel.Application');
              OLE2.SET_PROPERTY(application, 'Visible', 'False');
              -- Return object handle to the Workbooks collection
              workbooks:=OLE2.GET_OBJ_PROPERTY(application, 'Workbooks');
              -- Add a new Workbook object to the Workbooks collection
              workbook:=OLE2.GET_OBJ_PROPERTY(workbooks,'Add');
              -- Return object handle to the Worksheets collection for the Workbook
              worksheets:=OLE2.GET_OBJ_PROPERTY(workbook, 'Worksheets');
              -- Get the first Worksheet in the Worksheets collection
              -- worksheet:=OLE2.GET_OBJ_PROPERTY(worksheets,'Add');
              args:=OLE2.CREATE_ARGLIST;
              OLE2.ADD_ARG(args, 1);
              worksheet:=OLE2.GET_OBJ_PROPERTY(worksheets,'Item',args);
              OLE2.DESTROY_ARGLIST(args);
              -- Return object handle to cell A1 on the new Worksheet
              go_block(p_block_name);
              baslik := get_block_property(p_block_name,FIRST_ITEM);                                                  --commented to consider the second item as the first item
              f_item := p_block_name||'.'||get_block_property(p_block_name,FIRST_ITEM); --in order to skip the old filename in the excel file
              l_item := p_block_name||'.'||get_block_property(p_block_name,LAST_ITEM);
              first_record;
              LOOP
                  item_name := f_item;
                  row_n := NAME_IN('SYSTEM.CURSOR_RECORD');
                  col_n := 1;
                        LOOP
                             IF get_item_property(item_name,ITEM_TYPE)<>'BUTTON' AND get_item_property(item_name,VISIBLE)='TRUE' THEN
                             -- Set first row with the item names
                                   IF row_n=1 THEN
                                            args := OLE2.create_arglist;
                                            OLE2.add_arg(args, 1);
                                            OLE2.add_arg(args, col_n);
                                            cell := OLE2.get_obj_property(worksheet, 'Cells', args);
                                            OLE2.destroy_arglist(args);
                                            --cell_value := OLE2.get_char_property(cell, 'Value');
                                            ExcelFontId := OLE2.get_obj_property(Cell, 'Font');
                                            OLE2.set_property(ExcelFontId, 'Bold', 'True');
                                            baslik:=NVL(get_item_property(item_name,PROMPT_TEXT),baslik);
                                            args:=OLE2.CREATE_ARGLIST;
                                            OLE2.ADD_ARG(args, row_n);
                                            OLE2.ADD_ARG(args, col_n);
                                            cell:=OLE2.GET_OBJ_PROPERTY(worksheet, 'Cells', args);
                                            OLE2.DESTROY_ARGLIST(args);
                                            OLE2.SET_PROPERTY(cell, 'Value', baslik);
                                            OLE2.RELEASE_OBJ(cell);
                                   END IF;
                             -- Set other rows with the item values
                                       args:=OLE2.CREATE_ARGLIST;
                                       OLE2.ADD_ARG(args, row_n+1);
                                       :control.message:=row_n||' Row(s) Processed.';
                                synchronize;
                                       OLE2.ADD_ARG(args, col_n);
                                       cell:=OLE2.GET_OBJ_PROPERTY(worksheet, 'Cells', args);
                                       OLE2.DESTROY_ARGLIST(args);
                                  IF get_item_property(item_name,DATATYPE)<>'NUMBER' THEN
                                        OLE2.SET_PROPERTY(cell, 'NumberFormat', '@');
                                  END IF;
                                       OLE2.SET_PROPERTY(cell, 'Value', name_in(item_name));
                                       OLE2.RELEASE_OBJ(cell);
                             END IF;
                             IF item_name = l_item THEN
                                   exit;
                             END IF;
                             baslik := get_item_property(item_name,NEXTITEM);
                             item_name := p_block_name||'.'||get_item_property(item_name,NEXTITEM);
                             col_n := col_n + 1;
                        END LOOP;
              EXIT WHEN NAME_IN('system.last_record') = 'TRUE';
              --exit;
                         NEXT_RECORD;
              END LOOP;
              -- Autofit columns
              range := OLE2.GET_OBJ_PROPERTY( worksheet,'UsedRange');
              range_col := OLE2.GET_OBJ_PROPERTY( range,'Columns');
              OLE2.INVOKE( range_col,'AutoFit' );
              OLE2.RELEASE_OBJ( range );
              OLE2.RELEASE_OBJ( range_col );
              -- Save as worksheet with a Specified file path & name.
               IF NVL(filename,'0')<>'0' THEN
                    args := OLE2.CREATE_ARGLIST;
                            OLE2.ADD_ARG(args,filename );
                                         OLE2.INVOKE(worksheet,'SaveAs',args );
                                         OLE2.DESTROY_ARGLIST( args );
              END IF;
              --      Release the OLE objects
              OLE2.RELEASE_OBJ(worksheet);
              OLE2.RELEASE_OBJ(worksheets);
              OLE2.RELEASE_OBJ(workbook);
              OLE2.RELEASE_OBJ(workbooks);
              OLE2.INVOKE     (application,'Quit');
              OLE2.RELEASE_OBJ(application);
              -- Focus to the original location
    exception
         when others then null;
                                  raise form_trigger_failure;
    END; Note:- As i mentioned in my previouse posts if your webutil is not configured
    so the client_ole2 will not work before using client_ole2 u have to configure webutil.
    sarah

  • File is corrupted error while creating excel using xml

      Hi have created one excel file using XML code and sent it to mail as attachement. But when i open it, it displays error  message - file is corrupted and cannot be opened.
    below is my code - please review and tell what is wrong in it ASAP :
    * Creating a ixml Factory
       l_ixml = cl_ixml=>create( ).
    * Creating the DOM Object Model
       l_document = l_ixml->create_document( ).
    * Create Root Node 'Workbook'
       l_element_root  = l_document->create_simple_element( name = 'Workbook'  parent = l_document ).
       l_element_root->set_attribute( name = 'xmlns'  value = 'urn:schemas-microsoft-com:office:spreadsheet' ).
       ns_attribute = l_document->create_namespace_decl( name = 'ss'  prefix = 'xmlns'  uri = 'urn:schemas-microsoft-com:office:spreadsheet' ).
       l_element_root->set_attribute_node( ns_attribute ).
       ns_attribute = l_document->create_namespace_decl( name = 'x'  prefix = 'xmlns'  uri = 'urn:schemas-microsoft-com:office:excel' ).
       l_element_root->set_attribute_node( ns_attribute ).
    * Create node for document properties.
       r_element_properties = l_document->create_simple_element( name = 'TEST_REPORT'  parent = l_element_root ).
       l_value = sy-uname.
       l_document->create_simple_element( name = 'Author'  value = l_value  parent = r_element_properties  ).
    * Styles
       r_styles = l_document->create_simple_element( name = 'Styles'  parent = l_element_root  ).
    * Style for Header
       r_style  = l_document->create_simple_element( name = 'Style'   parent = r_styles  ).
       r_style->set_attribute_ns( name = 'ID'  prefix = 'ss'  value = 'Header' ).
       r_format  = l_document->create_simple_element( name = 'Font'  parent = r_style  ).
       r_format->set_attribute_ns( name = 'Bold'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Interior' parent = r_style  ).
       r_format->set_attribute_ns( name = 'Color'   prefix = 'ss'  value = '#92D050' ).
       r_format->set_attribute_ns( name = 'Pattern' prefix = 'ss'  value = 'Solid' ).
       r_format  = l_document->create_simple_element( name = 'Alignment'  parent = r_style  ).
       r_format->set_attribute_ns( name = 'Vertical'  prefix = 'ss'  value = 'Center' ).
       r_format->set_attribute_ns( name = 'WrapText'  prefix = 'ss'  value = '1' ).
       r_border  = l_document->create_simple_element( name = 'Borders'  parent = r_style ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Bottom' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Left' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Top' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Right' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
    * Style for Data
       r_style1  = l_document->create_simple_element( name = 'Style'   parent = r_styles  ).
       r_style1->set_attribute_ns( name = 'ID'  prefix = 'ss'  value = 'Data' ).
       r_border  = l_document->create_simple_element( name = 'Borders'  parent = r_style1 ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Bottom' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Left' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Top' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Right' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
    * Worksheet
       r_worksheet = l_document->create_simple_element( name = 'Worksheet'  parent = l_element_root ).
       r_worksheet->set_attribute_ns( name = 'Name'  prefix = 'ss'  value = 'Sheet1' ).
    *  r_worksheet->set_attribute_ns( name = 'Protected'  prefix = 'ss'  value = '1' ).    " WORKING
    * Table
       r_table = l_document->create_simple_element( name = 'Table'  parent = r_worksheet ).
       r_table->set_attribute_ns( name = 'FullColumns'  prefix = 'x'  value = '1' ).
       r_table->set_attribute_ns( name = 'FullRows'     prefix = 'x'  value = '1' ).
    * Column Formatting
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '40' ).
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '90' ).
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '140' ).
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '150' ).
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '90' ).
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '90' ).
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '90' ).
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '90' ).
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '90' ).
    * Blank Row
       r_row = l_document->create_simple_element( name = 'Row'  parent = r_table ).
    * Column Headers Row
       r_row = l_document->create_simple_element( name = 'Row'  parent = r_table ).
       r_row->set_attribute_ns( name = 'AutoFitHeight'  prefix = 'ss'  value = '1' ).
    * RFQ No.
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'RFQ No.'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    * RFQ Line Item No
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'RFQ Line Item No.'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    * Material
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'Material'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    * Quantity
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'Quantity'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    *  Order UNIT
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'Order Unit'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    *  Delivery Date
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'Delivery Date'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    *  RFQ Creation Date
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'RFQ Creation Date'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    *  RFQ Deadline Date
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'RFQ Deadline Date'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    * Price
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'Net Price'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    ** Login
    *  r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
    *  r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
    *  CONCATENATE 'Login - ' lv_date+6(2) '/' lv_date+4(2) '/' lv_date+0(4) INTO l_value.
    *  r_data = l_document->create_simple_element( name = 'Data'  value = l_value  parent = r_cell ).
    *  r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    * Blank Row after Column Headers
       r_row = l_document->create_simple_element( name = 'Row'  parent = r_table ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
    * Data Table
       LOOP AT it_final1 INTO wa_final1.
         CLEAR l_value.
         r_row = l_document->create_simple_element( name = 'Row'  parent = r_table ).
    * RFQ No.
         r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
         r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
         CLEAR l_value.
         l_value = wa_final1-ebeln .
    *    CONDENSE l_value NO-GAPS.
         r_data = l_document->create_simple_element( name = 'Data'  value = l_value  parent = r_cell ).           " Data
         r_data->set_attribute_ns( name = 'Type'  prefix = 'ss'  value = 'String' ).                               " Cell format
    * Line Item No
         CLEAR l_value.
         r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
         r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
         l_value = wa_final1-ebelp.
         r_data = l_document->create_simple_element( name = 'Data'  value = l_value   parent = r_cell ).           " Data
         r_data->set_attribute_ns( name = 'Type'  prefix = 'ss'  value = 'Number' ).                               " Cell format
    * Material
         CLEAR l_value.
         r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
         r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
         l_value = wa_final1-txz01.
         r_data = l_document->create_simple_element( name = 'Data'  value = l_value   parent = r_cell ).           " Data
         r_data->set_attribute_ns( name = 'Type'  prefix = 'ss'  value = 'String' ).                               " Cell format
    * RFQ QTY
         CLEAR l_value.
         r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
         r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
         l_value = wa_final1-ktmng.
         r_data = l_document->create_simple_element( name = 'Data'  value = l_value   parent = r_cell ).           " Data
         r_data->set_attribute_ns( name = 'Type'  prefix = 'ss'  value = 'Number' ).                               " Cell format
    * UNIT
         CLEAR l_value.
         r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
         r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
         l_value = wa_final1-meins.
         r_data = l_document->create_simple_element( name = 'Data'  value = l_value   parent = r_cell

    How to make a particular column non editable?
    Make your style protected and pass that style name to your required column while passing data.
    for example:
    Find below the code for protection of a style.
    Last two lines are very important.
    * Style for Headert
       r_style  = l_document->create_simple_element( name = 'Style'   parent = r_styles  ).
       r_style->set_attribute_ns( name = 'ID'  prefix = 'ss'  value = 'Headert' ).
       r_format  = l_document->create_simple_element( name = 'Font'  parent = r_style  ).
       r_format->set_attribute_ns( name = 'Bold'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Interior' parent = r_style  ).
       r_format->set_attribute_ns( name = 'Color'   prefix = 'ss'  value = '#B2FF64' ).      
       r_format->set_attribute_ns( name = 'Pattern' prefix = 'ss'  value = 'Solid' ).
       r_format  = l_document->create_simple_element( name = 'Alignment'  parent = r_style  ).
       r_format->set_attribute_ns( name = 'Vertical'  prefix = 'ss'  value = 'Bottom' ).
       r_format->set_attribute_ns( name = 'WrapText'  prefix = 'ss'  value = '1' ).
       r_border  = l_document->create_simple_element( name = 'Borders'  parent = r_style ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Bottom' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Left' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Top' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Right' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Protection'  parent = r_style  ).
       r_format->set_attribute_ns( name = 'Protected'  prefix = 'ss'  value = '1' ).

  • Error while generating report using BI 2013

    Hi
    When i am trying to generate a report from the application, On CMC i get this error "Destination disabled. [CrystalEnterprise.DiskUnmanaged]: []. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)". Please help.

    This specifically means that the destinations have not been configured in the Crystal Job Server.  If you're running 4.x, this may be part of the "Adaptive Job Server" instead of or in addition to a Crystal Job Server.  If you're using 3.1 or earlier, you'll also have to set up the destination in the Destination Job Server.
    You'll have to log in to the CMC, go to Servers, right-click on the correct job server and go to "Destinations".  You'll then add something like "File" or "Unmanaged Disk" to the available destinations and save.  Stop the job server, start it again, and your error should go away.
    Please be aware that unless you're using specific credentials to schedule the report or you're saving to the server where BO is installed, you'll need to make sure that the BO services are running under a network "Services" account that has access to the folder you're scheduling the report to. By default during installation it's set to run under the "Local Services" account that doesn't have access to the network.
    -Dell

  • Error while generating ear using ant script in weblogic workshop 10

    In my application I have to create a ear file which should have the war file inside.
    I have created the build.xml for both ear application and web application, workshop.xml using weblogic workshop option
    File->export->WorkshopAntScripts
    I have been using the following command to execute the build.xml in EARApp(ear application)
    set the environment variables by running
    D:\bea\wlserver_10.0\common\bin\commEnv.cmd
    then
    D:\Source_Code\EARApp>ant clean build archive -Dworkspace="D:\Source_Code"
    I am getting the following error,
    Buildfile: build.xml
    init.env:
    check.versions:
    init.typedefs:
    init:
    clean:
    init.env:
    check.versions:
    init.typedefs:
    init:
    clean:
    [delete] Deleting 53 files from D:\Source_Code\WebApp\.apt_src
    [delete] Deleted 14 directories from D:\Source_Code\WebApp\.apt_src
    [delete] Deleting 218 files from D:\Source_Code\WebApp\build\classes
    [delete] Deleted 42 directories from D:\Source_Code\WebApp\build\classes
    [delete] Deleting directory D:\Source_Code\WebApp\build\assembly\.src
    [delete] Deleting directory D:\Source_Code\WebApp\build\weboutput
    [mkdir] Created dir: D:\Source_Code\WebApp\build\weboutput
    init.env:
    check.versions:
    init.typedefs:
    init:
    build:
    init.env:
    check.versions:
    init.typedefs:
    init:
    build:
    [apt] [web.content.root]|[D:\Source_Code\WebApp/\WebContent]
    [apt] [web.source.roots]|[D:\Source_Code\WebApp/src]
    [apt] Compiling 113 source files to D:\Source_Code\WebApp\build\classes
    [apt] warning: Annotation types without processors: [java.lang.SuppressWarnings, org.apache.be
    ehive.controls.system.jdbc.JdbcControl.ConnectionDataSource, org.apache.beehive.controls.system.jdbc
    .JdbcControl.SQL, com.bea.control.annotations.TransactionAttribute]
    [apt] 1 warning
    [apt] warning: Annotation types without processors: [java.lang.SuppressWarnings]
    [apt] 1 warning
    [apt] [web.content.root]|[D:\Source_Code\WebApp/\WebContent]
    [apt] [web.source.roots]|[D:\Source_Code\WebApp/src]
    [apt] Compiling 53 source files to D:\Source_Code\WebApp\build\classes
    [apt] warning: Annotation types without processors: [java.lang.SuppressWarnings]
    [apt] 1 warning
    [javac] Compiling 113 source files to D:\Source_Code\WebApp\build\classes
    [javac] Note: Some input files use unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.
    [javac] Compiling 53 source files to D:\Source_Code\WebApp\build\classes
    [delete] Deleting directory D:\Source_Code\WebApp\build\weboutput
    [mkdir] Created dir: D:\Source_Code\WebApp\build\weboutput
    [copy] Copying 1 file to D:\Source_Code\WebApp\build\weboutput\WEB-INF
    [copy] Copying 1 file to D:\Source_Code\WebApp\build\weboutput\WEB-INF
    init.env:
    check.versions:
    init.typedefs:
    init:
    stage:
    [delete] Deleting directory D:\Source_Code\EARApp\.staging
    [mkdir] Created dir: D:\Source_Code\EARApp\.staging
    [copy] Copying 7 files to D:\Source_Code\EARApp\.staging
    init.env:
    check.versions:
    init.typedefs:
    init:
    stage.to.ear:
    init.env:
    check.versions:
    init.typedefs:
    init:
    stage:
    init.env:
    check.versions:
    init.typedefs:
    init:
    generated.root.init:
    assembly:
    [mkdir] Created dir: D:\Source_Code\WebApp\build\assembly\.src
    [assemble] Assembly failed - Control Assembly process failed
    [assemble] Caused by: info
    BUILD FAILED
    D:\Source_Code\EARApp\build.xml:189: The following error occurred while executing t
    his line:
    jar:file:/D:/bea/WLSERV%7e1.0/workshop/lib/workshop-antlib.jar!/com/bea/workshop/cmdline/antlib/antl
    ib.xml:92: The following error occurred while executing this line:
    D:\Source_Code\EARApp\build.xml:201: The following error occurred while executing t
    his line:
    D:\Source_Code\WebApp\build.xml:351: The following error occurred while executing thi
    s line:
    D:\Source_Code\WebApp\build.xml:177: The following error occurred while executing thi
    s line:
    D:\Source_Code\WebApp\build.xml:424: Assembly failed.
    Some one help me solve this problem.
    Thanks in advance.

    --> some error on posting please refer to the next post...
    From the error logs we can trace it out to the web project's Build.xml file ....I was getting a similar error and by commenting out the following lines in the web project's Build.xml I am able to run the build script correctly and get a EAR file. The lines are
    <!--
    <assemble
    moduleDir="${generated.module.root}"
    moduleName="${project.name}"
    srcOutputDir="${assembly.src}"
    appRootDir="${ear.root}">
    <assemblyContext factory="org.apache.beehive.controls.runtime.assembly.WebAppAssemblyContext$Factory" />
    <assemblyContext factory="org.apache.beehive.controls.runtime.assembly.AppAssemblyContext$Factory" />
    <classpath refid="assembly.classpath" />
    <fileset dir="${project.dir}">
    <include name="**/*.controls.properties" />
    </fileset>
    </assemble>
         -->
    Please check it now, also if any one can let us know the function or role played by the above lines it would be great. Also if there would be any future or unseen problems by commenting out these lines please do let us know...
    Thanks
    -MiM
    Edited by prodigymonish83 at 10/22/2007 5:56 AM

  • EEWB : Error while generating extension using wizard

    Folks,
    We are on CRM 5.0, am getting the following error when I try to create few custom fields using EEWB.
    While creating the project & extension, I gave #temp as the package (dev. class).
    when I try to start the wizard for creating new fields and provide the technical details and press 'complete' button, am getting the following error:
    <b>Task BUPA_CI_FILL CRDCLNTxxx
    Table BUT000_TD (Statements could not be generated)</b>
    Detailed Error message:
    Message no. DT066
    Diagnosis
    A requested database action could not be carried out.
    Procedure
    First try to repeat the action which caused this message. If the
    database action again cannot be carried out, find out the cause of the
    error using the analysis tool in the database utility. There might be an
    inconsistency between the table definition in the ABAP Dictionary and
    the existing nametab (runtime object for the table).
    Can you suggest what could be wrong here.
    Thanks in advance
    Guest01

    thanks Sudheer. I checked the syntax check and got the following log displayed.
    I can send you the description (long text) of some of these messages. could you have a look at them and give your inputs.
    Check table/structure BUT000_TD
               Check table BUT000_TD (USERID/05/25/07/06:21)
               Enhancement category 3 possible, but include or subty. not yet classified
               Several fields of type LANG: Select one of these as text language
               No data exists (structure change caused by DROP / CREATE)
               Error in code generation for deleting table BUT000_TD
               Table BUT000_TD (Statements could not be generated)
               Error number in DD_DECIDE (64)
               Check on table BUT000_TD resulted in errors

  • New to Lifecycle, Error while generating PDF using Output service

    Hi All,
    I am using LC 8.x for weblogic. I am using the code given in the documents to generate PDF given XDP and XML data, using Output Service. I am getting the following error,
    Exception in thread "Main Thread" com.adobe.idp.DocumentError: error unmarshalling arguments; nested exception is:
    java.lang.ClassNotFoundException: Failed to load class com.adobe.idp.DocumentFileID (see the server-side log for details)
    at com.adobe.idp.DocumentManagerClient.clientSidePush(DocumentManagerClient.java:181)
    at com.adobe.idp.Document.passivateInitData(Document.java:865)
    at com.adobe.idp.Document.passivate(Document.java:704)
    at com.adobe.idp.Document.passivate(Document.java:661)
    at com.adobe.idp.Document.writeObject(Document.java:500)
    Any help is greatly appreciated.
    Thanks
    Raghu

    Hi
    I am also doing a similar activity. and getting a IllegalStateException.
    com.adobe.livecycle.output.exception.OutputException: java.lang.IllegalStateException
    at com.adobe.livecycle.output.client.OutputClient.generatePDFOutput(OutputClient.java:141)
    at CreatePDFDocument.main(CreatePDFDocument.java:56)
    Caused by: java.lang.IllegalStateException
    at com.adobe.idp.dsc.clientsdk.ServiceClientFactory$1.handleThrowable(ServiceClientFactory.j ava:67)
    at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:220)
    at com.adobe.livecycle.output.client.OutputClient.invokeRequest(OutputClient.java:436)
    at com.adobe.livecycle.output.client.OutputClient.generatePDFOutput(OutputClient.java:124)
    ... 1 more
    Caused by: java.lang.NoClassDefFoundError: org/apache/axis/soap/SOAPConstants
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Unknown Source)
    at com.adobe.idp.dsc.clientsdk.ServiceClientFactory.createMessageDispatcher(ServiceClientFac tory.java:586)
    at com.adobe.idp.dsc.clientsdk.ServiceClientFactory.getMessageDispatcher(ServiceClientFactor y.java:543)
    at com.adobe.idp.dsc.clientsdk.ServiceClient.getMessageDispatcher(ServiceClient.java:239)
    at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:205)
    ... 3 more
    Please give a solution for this problom.
    regards
    Ullas

  • BW Metadata is incomplete error while generating datasources using CTBW

    The variant configuration datasources were created successfully in development system and BI side works fine in dev.
    We moved the VC datasources to our Quality system. Since our QA system client (500) is different from development (100) ECC system, I need to change the client number in QA ECC (as 500) and regenerate VC datasources using CTBW tcode [based on OSS note 588184].
    I used the following steps in QA ECC system
    go CTBW tcode in QA ECC
    Changed the client number from 100 to 500 for the VC datasource
    Selected the VC datasource row and then click on Characteristics
    Click on DataSource -- got the error "BW Metadata is incomplete"
    Not sure what is reason for that error message, Please advise if I am missing any steps.
    Thanks in advance

    Thanks for your quick response.
    We have same issue as mentioned by Sudheer.
    We don't have QA 500 client number in our Dev system, I can't generate the VC datasources in DEV.
    I can't change the tables in CLBW_SOURCES in DEV to include 500 as we don't have it.
    Let me know if this works for me
    I am asking BASIS to open QA 500 client so that I will make CLBW_SOURCES table entries change (from 100 to 500) and then re generate the QA VC datasources.
    Then load the data into SAP BI.
    My another question is even if we are successfully, we have another development box (similar to the first dev box) and another Quality box say Quality 2 (900 client, same as Quality 1), do I need to ask BASIS again to open Quality 2. Also what about production box..?
    It would be great if we can change it in first dev box so that we can move across these changes to different boxes.
    Thanks again

  • Error when generating PDF using FM 9

    I am trying to generate a PDF using FM 9 and Distiller 9. For some reason, one particular file is causing problems. When I try to generate a PDF with this file, I get the following error message:
    %%[ Error: syntaxerror; OffendingCommand: M ]%%
    %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
    %%[ Warning: PostScript error. No PDF file produced. ] %%
    Anybody know what to do when this happens?
    Thanks.

    I suppose I should provide more background. We recently upgraded to the Technical Communication Suite 2, which when this problem started occurring. Prior to that, I was able to generate a PDF from this file when I was using FrameMaker 8.
    The file in question is a chapter in a book. Using FrameMaker 9 and Distiller 9, I can create PDFs from the other files in the book. The one with which I am having problems has screenshots in it. The screenshots are GIFs that I imported as files, and I did not link to them. I did some experimenting and discovered that if I print to file and drag the PS file into distiller, the PDF generates. Also, I created a version of this chapter without screenshots, and was able to generate a PDF.
    And I am now getting a different error message:
    Adobe PDF Settings file read error in PDFX4 2008.joboptions:
    /CheckCompliance out of range
    Anybody have any thoughts?
    Thanks.

  • Error while generating stub using ant generate-stubs

    I am getting error while running ant "generate-stubs" for generating stub.The details of errors as below:
    [exec] error: modeler error: expected root element "definitions" (in namesp
    ace "http://schemas.xmlsoap.org/wsdl/"), found element "html" (in namespace "nul
    l")
    Any help????

    Perhaps there is an error while you specified the namespaces. Chk them and try............Hope that helps...............ABHI

Maybe you are looking for

  • Few issues with plug in's I need help with.

    Hi guy's! I bought my 17" G4 powerbook yesterday and I am trying to get it setup to work on all the webpages I visit. My first issue is that on one site I was told by pop up that I needed the wmp 9 software so I went to the downloads site and dl'ed w

  • How to refresh VO to get the changed value in other AM or backend database

    one VO is refrenced by two AMs, when i insert or update data by VO in one AM, how to get the changed data in another AM ? another case is i have updated some attributes of the record in database by SQL statement ,but the client can not get the update

  • Pre-order & Authorization Expiration Date

    On July 11th I placed a pre-order with ToysRUs.com for an item that will be released on October 16th. However, according to my PayPal account, the authorization expiration date for that order is August 10th. Toys 'R Us will not allow me to change my

  • Mail webwite address not function?

    firefox got a capable allow user click the choice " mail website address", I use it often but recently around a month it not function while i click same item, t tried many tme and almost everyday still same.

  • Where's App World?

    My friend has a Bold 9780 for about a year now.  He has always used App World, but for some reason a few months ago his App World suddenly dissappeared from his menus, although it is still listed under his applications.  Being somewhat of a guru myse