Error in generating Run time version of the KB Object of a VC Product

Hi All
There is a VC Product which needs to be transported to the CRM server via Middleware.
Hence I need to create a Knowledge Base (KB Object) and generate a Run-Time version of the same.
I am getting an error while generating the Run Time version. The description of the error is as follows:
Object characteristic COSTING_LOT_SIZE is supported in IPC scnearios 3,5
and
Object characteristic PRICE_LIST is not supported in IPC scnearios.
The exceptions raised are STPO-MENGE (Component Quantity) and SDCOM-VKOND (Variant Condition)
Please provide your inputs and suggestions in this regard.
P.S: Once I generate the run time version successfully, the CRM Middleware Consultant needs to download the VC Product to CRM.
Thanks in Advance
Regards
Chaitanya

Hi Mike,
It likely is the viewer causing the problem. 2008 now has cascading parameters and the activex viewer does not support them.
All I can suggest is you try CR XI R2 which you can upgrade for free, you have to contact CIC to get a keycode to deploy your app, and test again.
R2 is out of support now so no fixes available...
http://downloads.businessobjects.com/akdlm/crystalreports/crxir2_sp4_full_bld_0-20008684.exe
http://downloads.businessobjects.com/akdlm/crystalreports/CRYSTALREPORTS06_0-20008684.EXE
Thanks
Don

Similar Messages

Variant config : Run time Version

Hi All,
During run time version generation in Variant configuration, in R/3 using Tcode CU34 , errors like two characteristics are pointing to same table and field name and structure is not defined.
Process is like this : We created configuration profile, checked the consistency in CU50 and then created KB object using CU31 and then executed run time version in CU34...here we are getting error messages and unable to generate run time versions.
Further, these run time versions will be used in CRM system....
It is understand that CRM doesnt support multiple characteristics pointing to same table field....
My question is whether the R/3 will check the consistency of profile/run time version in CRM also at the time of run time version generation?
Suggest me solution.....
BR,
Krishna

No.
But for the inhouse use of your NCo-based application you just distribute your app with the needed runtime DLLs:
- SAP.Connector.DLL (deploy to app-dir or GAC)
- SAP.Connector.Rfc.DLL (deploy to app-dir or GAC)
- LIBRFC32.DLL (deploy to app-dir or System32)

Configurable Products : Errors in creation of runtime version of the KBs

Hi All,
While creating run-time versions for the knowledge base objects, I'm encountering several warnings/errors. A few of those are:
1. Config. profile invalid because it is maintained for single-level BOM explosion which is not supported in SCE. Any workaround for this apart from changing the single-level BOM option in config. profile?
2. Object Characteristic XXX not supported in any IPC scenario.
3. Object characteristic Z_VBAK_VBELN supported in IPC scenarios 1,5
4. Characteristic Z_NO_INPUT: SCREEN_DEP-NO_INPUT only supported as of IPC 3.0
5. Characteristic XXX not assigned to a class.
6. Procedure XXX to characteristic YYY is not supported.
7. No Config. Profile exists for material XXX (appl:YYY, class type:ZZZ) - Although the profile has been mainatained.
8. Action XXX to characteristic YYY - value not supported. Where are the actions assigned to characteristcs or characteristic values?
Please suggest the resolution for these errors/warnings. If there is any comprehensive guide or help for these issues, do let me know.
Thanks in advance,
Vishal

Hi Saurabh,
the only resolution is to change the configuration profile to multi-level explosion.
Michael

Generating Runtime version of a KB Object of Variant Configurable product

Hi All
There is a VC Product which needs to be transported to the CRM server via Middleware.
Hence I need to create a Knowledge Base (KB Object) and generate a Run-Time version of the same.
I am getting an error while generating the Run Time version. The description of the error is as follows:
Object characteristic COSTING_LOT_SIZE is supported in IPC scnearios 3,5
and
Object characteristic PRICE_LIST is not supported in IPC scnearios.
The exceptions raised are STPO-MENGE (Component Quantity) and SDCOM-VKOND (Variant Condition)
Please provide your inputs and suggestions in this regard.
P.S: Once I generate the run time version successfully, the CRM Middleware Consultant needs to download the VC Product to CRM.
Thanks in Advance
Regards
Chaitanya

Sreekanth,
these errors need to be analyzed by VC modeler. They indicate incompatibilies between VC and SCE. Certain expressions which are possible in the VC are not supported by the IPC (see deltalist in the Online Doc).
For example, error 1) and 2) indicate that a procedure has been assigned to a characteristic (not best practice, but often done out of convenience). It needs to be assigned to a configuration profile to run in the IPC. The variant tables seem to have empty cells which is an undefined state (tables are represented as relational tables in the IPC). BOM items need to have an integer quantity. And so on.
You can't solve these issues from a mere techncial perspective as modeling changes can have a busienss impact. The person responsible for the VC models needs to look at it.
Regards, Michael

Cannot download itunes. error message is run time error 6034

I cannot download itunes. the error message is run time error 6034. advices to contact application support team

Try the following user tip if you're still having the 6034 issues:
Troubleshooting issues with iTunes for Windows updates

How can I uninstall Labview run time engine from the machine?

I understand that Labview has not given any provision to show customized 'License Agreement screen'. Isn't it? This is the main cause of my problem. Since I want to show our own license agreement (LA) screen, I made the one using Labview. To show this license agreement screen, I first install a small application which has only this LA screen with Labview run time engine. The customer can see License Agreement Screen with Labview Run Time Engine on his machine. If My customer accepts the LA, I will install the main application further by calling another setup.EXE file.
If my customer selects 'Do Not Agree' to the LA, I will quit the installation process. Here I also want to 'uninstall' Labview Run Time Engine
from his machine since he doesn't accept License. I would like to know how to uninstall Labview run time engine from his machine?
Another way which I could think is to run the LA screen from the CD with Labview run time engine on the CD. I will start installing the main S/W to the customer's machine with LABview Run Time Engine only after he accepts License agreement. I would like to know how to run the Labview application from CD without installing run time engine on the target machine?
Can anyone suggest solution to my problem?
Thanks,
Chander

J-Tek,
I would suggest re-installing the Run-time Engine and then uninstalling it after a reboot. Also, you can download a program called Msicuu.exe (for NT, 2000, XP or Msicu.exe for 9x) to help clean up the registry for uninstalled programs.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

I'm getting an error message on my time machine backup: "The backup disk image "/Volumes/Data/MacBook.sparsebundle" is already in use." Any suggestions?

I'm getting an error message on my time machine backup: "The backup disk image “/Volumes/Data/MacBook.sparsebundle” is already in use." Any suggestions?

Excellent apple networking on Lion or ML is usually the issue.
Reboot the TC.. if that don't fix it.. reboot the whole network.. modem.. router.. TC.. clients.. restart in that order.
There are tools.. download the real tool if you have lion..
For ML you are stuck with toyland.. AU 6.1 .. good luck with the plastic hammer.
Read C12 and C17
http://pondini.org/TM/Troubleshooting.html

Running Time Machine for the first time, how that I make sure that some information I have in the external drive does not get erase in the prosess

Running Time Machine for the first time, how that I make sure that some information I have in the external drive does not get erase in the prosess

1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Note: This is now your Library. It's not a Back Up, and you need another disk for backing up.
Regards
TD

Unable to run time evaluation for the entire year...

hi experts,
I'am unable to run time evaluation for the entire year, even though mentioned the date as Force calculation as of : 01.01.2010
and evaluation upto date : 31.12.2010. when time evaluation is run , the log is only run for Jan 2010.
Maintained IT2011 from 01.01.2010 to 31.12.2010
IT0050 from 01.01.2010 to 31.12.9999
IT0003 : PDC recalculation : 01.01.2010
Kindly advise.
Regards
Pammi

Check if Time Management status is 1 or 9....
If it is 1 then it would not run for the entire year..It would run only till today. If it is 9, then the TE runs for future also...also check if in the schema it is activated for future runs or not...

[svn:bz-4.0.0_fixes] 20451: backporting bug fix BLZ-570/ BLZ-620 Double linked list with lot of objects result in BlazeDS Error deserializing error : StackOverflowError We put hard limit to the max object nest level to prevent StackOverFlowError .

Revision: 20451
Revision: 20451
Author:   [email protected]
Date:     2011-02-24 08:33:31 -0800 (Thu, 24 Feb 2011)
Log Message:
backporting bug fix BLZ-570/BLZ-620 Double linked list with lot of objects result in BlazeDS Error deserializing error : StackOverflowError We put hard limit to the max object nest level to prevent StackOverFlowError. the default max object nest level is 1024 and it can be configured in the endpoint/serialziation section in service-config.xml. This needs documentation. Checkintests pass
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-570
    http://bugs.adobe.com/jira/browse/BLZ-620
Modified Paths:
    blazeds/branches/4.0.0_fixes/modules/common/src/flex/messaging/errors.properties
    blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/endpoints/AbstractEndpoint.j ava
    blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/SerializationContext.java
    blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/amf/Amf0Input.java
    blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/amf/Amf3Input.java
    blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/amf/AmfIO.java

Dear Pallavi,
Very useful post!
I am looking for similar accelerators for
Software Inventory Accelerator
Hardware Inventory Accelerator
Interfaces Inventory
Customization Assessment Accelerator
Sizing Tool
Which helps us to come up with the relevant Bill of Matetials for every area mentioned above, and the ones which I dont know...
Request help on such accelerators... Any clues?
Any reply, help is highly appreciated.
Regards
Manish Madhav

[svn:bz-3.x] 20443: back porting bug fix BLZ-570/ BLZ-620 Double linked list with lot of objects result in BlazeDS Error deserializing error : StackOverflowError We put hard limit to the max object nest level to prevent StackOverFlowError .

Revision: 20443
Revision: 20443
Author:   [email protected]
Date:     2011-02-23 21:19:22 -0800 (Wed, 23 Feb 2011)
Log Message:
back porting bug fix BLZ-570/BLZ-620 Double linked list with lot of objects result in BlazeDS Error deserializing error : StackOverflowError We put hard limit to the max object nest level to prevent StackOverFlowError. the default max object nest level is 1024 and it can be configured in the endpoint/serialziation section in service-config.xml. This needs documentation. Checkintests pass
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-570
    http://bugs.adobe.com/jira/browse/BLZ-620
Modified Paths:
    blazeds/branches/3.x/modules/common/src/java/flex/messaging/errors.properties
    blazeds/branches/3.x/modules/core/src/java/flex/messaging/endpoints/AbstractEndpoint.java
    blazeds/branches/3.x/modules/core/src/java/flex/messaging/io/SerializationContext.java
    blazeds/branches/3.x/modules/core/src/java/flex/messaging/io/amf/Amf0Input.java
    blazeds/branches/3.x/modules/core/src/java/flex/messaging/io/amf/Amf3Input.java
    blazeds/branches/3.x/modules/core/src/java/flex/messaging/io/amf/AmfIO.java

Error 1920 installing run-time 2010

Hello all,
I am trying to install the CVI 2010 Run-time Engine I downloaded from this page on a Windows 7 Professional machine.
When the installer is trying to start services, after a *loooong* timeout I receive the error:
Error 1920. Service "Lockout Citadel Server" failed to start. Verify that you have sufficient privileges to start system services.
The user I am connected on is the machine administrator.
After clicking Abort the installer starts rolling back the installation and after another *loooong* time I receve another error:
NI Logos 5.2.1 Installation has failed. Continue?.
Tested on 2 different brand new boxes with the same results.
Now the question is: how can I install the run-time engine on a Win7 system?
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Hello nick, thanks for looking into this.
I have been performing some tests and at last succeeded in installing the RTE: it seems the problem lies on the privileges the installer is run.
In my tests I created a distribution for the complete application on my development machine and tried installing it on the target one, but received the error "This program needs to be executed with high privileges" or something like this (I'm on an italian version of Win7, and this is an answer to one of your questions).
But why, since I am using an administrator user? (another answer for you )
To be short, the context menu for the distribution installer is this one:
and if I select "Run as administrator" the procedure ends up without errors. Simply double-clicking the program does not run it this way.
I have next tested on the second machine: the RTE installer terminates without errors if run in the same way.
I do not want to uninstall the RTE on those machines and try to get an installation log, but we are waiting another new machine in the next days so I will be able to make some test more in that moment. It will be localized in English: if the problem really lies on privileges hopefully this will make no difference.
If this is the correct path, probably the best solution could be to upgrade the RTE installer so that it issues the privileges message too.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Installer Error of LabView Run Time Engine 6.0.2 "premature"

I cannot Install the LabView Run Time Engine on a Computer which runs on Windows 2000.
The Installation breaks on start with the Error Message: "Installation ended premature, because of an Error!"
Does anyone know what to do is ?
Thanks for Help

It's rather difficult to guess why since the error does not give any more information, but there are a few things you can try. First, if you are installing from a CD, try downloading the installer to your desktop first and then run it. CD-ROMs can sometimes run slower that the installer and this can cause problems. Also, check to see what other NI software may have been installed on this machine and determine if any of it could conflict with the 6.0.2 Run-Time Engine. Just possibilities but hopefully they can get you going!
J.R. Allen

Why does my LabVIEW Run-time server return the message "source does not exist Last UI message: Start Execution"?

I am trying to build a stand-alone application on a target pc for which I have built a LabVIEW server that TestStand can use as an adapter.
In order to do this, I searched this site and found the topic: "How do I build and Use the LabVIEW Operator Interface as a LabVIEW ActiveX Run-time server?" After following the procedure to the letter, I ran the testexec.exe file as instructed and loaded my sequence file. As soon as I try to "Single Pass" or "Test UUT" I get an error which says "source does not existLast UI message: Start Execution". This error appears when running the testexec.exe file on the target pc or the development pc.
I have found though, th
at if I open the Operator interface through the Start: Programs>National Instruments>TestStand>Operator Interfaces>LabVIEW then the sequence file runs without these errors.
Any ideas why this is happening?

Hello Robroy,
The KB you mentioned explaines how to build the LV Operator Interface (OI). So, I assumed you built the LV OI and also configured the LV adapter to use the TestStandGUILVRTS server without problems.
The error you are getting may be due to missing VIs. In other words, the LabVIEW OI may not be finding all the VIs your sequence is calling.
In order to deploy sequences that call VIs, you need to first run Tools >> Assemble VIs for Runtime Distribution. This tool gets all the VIs your sequence needs and saves in a separate directory.
For more information, you may check the TestStand User Manual chapter 17, it describes how to distribute TestStand and sequences.
Regards,
Roberto Piacentini
Applications Engineer
National Inst
ruments
www.ni.com/ask

ERROR WHILE GR : RUN TIME

Dear All,
I am getting run time error while doing GR :
Run Time Errors Message_Type_X
Date and Time :
Short dump has not been completely stores ( too big)
Please guide
Thanks
Vikas

Sorry, this is much too vague for people to give meaningful replies. Please look in SAP Support Portal first for related notes, if customer code is involved try to analyse the shortdump yourself first. If you post again, make sure you include all necessary details.
Thread locked.
Thomas

Error in generating Run time version of the KB Object of a VC Product

Similar Messages

Maybe you are looking for