Error in HelloWorld service using oracle web services manager(Test Engine)

Hi All,
I deployed simple hello world web services on jwsdp2.0 and it is running at the following end point address :
http://localhost:8080/jaxrpc-HelloWorld/hello
When I use the Test engine provided by oracle web services manager to test this web service,Then I got the following response:
<Result><ServiceResult name="sayHelloBack"><Data>Could not send: JAXRPCSERVLET28: Missing port information</Data></ServiceResult></Result>
I am just wondering what is the cause of this behavior?Is it because of compatibility problem between oracle and jwsdp2.0 based web services?As I mentioned earlier that HelloWorld Service is running under jwsdp2.0 & tomcat50-jwsdp and it works fine from jwsdp2.0 based client.I would appreciate your reply.Thanks.
Kashif

I had the same problem, but adding the ant/lib directory to classpath helped.

Similar Messages

Invoking a web service not created using oracle web service lib

Hi All,
I have a need to invoke my web service from oracle sql command. My web service not created using oracle web service library, but it is created using axis c++ libraries. Is it possible to do so,
Thanks in advance,
Regards,
Monica

In order to call out from the database process, is SQL (or PL/SQL) you need to generate some client code, that understand the details about the specific of the service you want to invoke and can produce the correct SOAP request. Once this proxy is uploaded in the Database, you can use it.
There is a set of Database Web services samples that should help you get started. You can also take a look at the developer's guide - see Developing a Web Service Client in the Database.
Hope it answers your question.
--eric

Getting error while trying to create a document using oracle web ADI resp.

Hi All,
When I am trying to create a document using Oracle Web ADI Responsibility and using "Ben Ri Process Bnf" integrator, it is showing me error
"The following error has occurred
Exception Name: oracle.apps.bne.exception.BneParameterException - No parameter list definition at parameter list id 800:PER_RI_JPG_PARAM_LIS
Log File Bookmark: 868035"
Can anybody tell me the cause of this error?
Thanks.

Please see the solution in (The Descriptive Flexfield With Application Name Receivables (AR) and Name Party Site Information (HZ_PARTY_SITES) Is Not Frozen [ID 743262.1]).
Thanks,
Hussein

Loading FA data using ORACLE WEB ADI brings application down.

Hi,
Can anyone suggest on the below issue.
Loading FA data using ORACLE WEB ADI brings application down.
Regards
Ketan.

Application Release 12.0.6
Database version 10.2.0.2
The following error has occurred
Exception Name: java.lang.NullPointerException
Stack Trace: java.lang.NullPointerException at oracle.apps.fnd.common.WebAppsContext.doValidateSession(WebAppsContext.java:1425) at oracle.apps.fnd.common.WebAppsContext.validateSession(WebAppsContext.java:1775) at oracle.apps.bne.framework.BneOracleWebAppsContext.isValidateIcxSessionTicket(BneOracleWebAppsContext.java:2258) at oracle.apps.bne.framework.BneOracleWebAppsContext.setupContext(BneOracleWebAppsContext.java:1511) at oracle.apps.bne.framework.BneAbstractWebAppsContext.getContext(BneAbstractWebAppsContext.java:207) at oracle.apps.bne.framework.BneBaseBajaContext.getBneWebAppsContext(BneBaseBajaContext.java:191) at oracle.apps.bne.framework.BneBajaServlet.doRequest(BneBajaServlet.java:151) at oracle.apps.bne.framework.BneBaseServlet.doPost(BneBaseServlet.java:95) at javax.servlet.http.HttpServlet.service(HttpServlet.java:763) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64) at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15) at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:299) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:187) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)
Sometimes we are getting
Fatal error FND_MESSAGE : max no of open file descriptors.
In alert log file it is showing
WARNING:Oracle instance running on a system with low open file descriptor
limit. Tune your system to increase this limit to avoid
severe performance degradation.
Not able to understand exactly where the issue is.
Regards

Forms6i Server (9iAS R1.x) loadbalancing using Oracle Web Cache

Hello,
I have read that it's possible to use Oracle Web Cache as a software load balancer between multiple Application Servers.
We are running Oracle9iAS R1.0.2.2.2a, with Forms/Reports6i servers on 2 Win2k boxes i.e our Forms6i application is deployed on two seperate boxes in two distinct locations. Users at each location, use their respective App Server url.
Since the application is the same i.e. Forms6i code/fmx is the same for both locations, I am looking into loadbalancing and failover capability that Web Cache might be able to provide.
So basically all users from both locations will point their browser to this Web Cache and the Web Cache will direct each connection to either of the two boxes. So, if either of the boxes dies, Web Cache will divert the requests to the other box.
My concern is whether Web Cache supports this for the Forms requests that it will receive from the users. We are using Servlet Deployment of Forms.
Has anyone done this or has any ideas as to whether it's going to work or not?
Thanks,
Manish

Manish,
we tested this but came across problem with Webcache that have to do with the jsession Forms uses. This is fixed for Oracle9iAS 9.0.2.x. So if you want to run Forms with Webcache in front, then please do this using the latest version of Oracle9iAS V2 Webcache. For Oracle9iAS V1 and Forms Services we recommend not to use Webcache but do the load balancing via JServ.
Frank

Error while running application under Oracle Web logic server 10.3

Hi all,
I am using Oracle Web logic server 10.3 to run reports(CR4E).when at the time of adding server in to crystal report application
i had taken Application Development Support Then at run time it is showing following error message
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException---- Error code:-2147467259 Error code name:failed
How to Solve these critical problem
Thanks ,
Amol Patil

Hi Rahul,
Server logs may contain JDK warnings such as the following if the jdk folder is an mklink.
*[WARN ][osal ] Could not add counter (null)\ for query*
*[WARN ][osal ] Failed to init virtual size counter.*
These are just warnings and do not affect any servers.
Workaround
To suppress these warnings, add the following line in the FRAMEWORK_LOCATION\provisioning\provisioning-plan\fusionapps_start_params.properties file
-Xverbose:osal=error
You can even try the solution provided in below link
http://hirt.se/blog/?p=169
Regards
Fabian

Unable to generate page using Oracle Web publishing Assistant

I am getting the following error ( seen using event viewer) while generate the Web page using Oracle Web publishing Assistant in Windows NT 4.0:
1. Couldn't find fiber to delete .
Event 5038
2. Page Generator initialization failed.
Event 1010
3. Could not unmap view of the template file, due to error #0 .
Event 6011
null

I'm experiencing the same problem - any help would be greatly appreciated

Updating RoutingServices using Oracle ESB Client Management API

Hi,
How to update Routing Rules of a RoutingService using Oracle ESB Client Management API.
Is there any other way other than console.
Any help is really appriciated.
Thanks

I decompiled HttpClient and ConsoleClientImpl and this is what I found --- The following URL is what is constructed,
http://localhost:80/esb/j_security_check and these parameters are passed as POST - j_username=oc4jadmin&j_password=welcome1
I tried
http://localhost:80/esb/j_security_check?j_username=oc4jadmin&j_password=welcome1
and got 404 error.
However, this exercise confirmed that hostname=localhost and port=80 is just fine.. the problem seems to lie somewhere else

Ask timesten 11.2 Using Oracle Clusterware to Manage Active Standby Pair

Using Oracle Clusterware to Manage Active Standby Pairs
http://download.oracle.com/docs/cd/E13085_01/doc/timesten.1121/e13072/cluster.htm#CCHCFAAD
What is that mean ?
I have to use Share Storage for... Oracle Clusterware?
I think right?... or wrong ?
Can I have VIP on Master node, and then master down... standby will active with VIP, right ?

A TimesTen A/S pair is a replicated configuation where a pair of TimesTen datastores, usually located on different machines, act in many ways as a single unit. The active master can process both queries and DML (insert/update/delete) while the standby master can only process queries (think of this as a little like Active Dataguard). Applications that run on the same machine as one of the TT datastores can connect to it via the very high performance 'direct mode' while applications running on other machines can access the datastores in client/server mode. There is a clearly defined procedure for failing over if the active master fails (which involves promoting the standby master to active) and for recovering a failed store back to the correct role. Direct mode applications must failover with the datastore whereas for client/server applications the connection(s) need to be failed over. The basic A/S pair replication mechanism has been available since TimesTen 6.0. The replication configuration is defined via special SQL syntax and monitoring and management (failover control etc.) is performed by way of built-in procedure calls. However, in TT 6.0 and 7.0 the actual monitoring and management of the A/S pair, including failover, is left for the user to implement themselvses or via some custom integration with an external cluster manager.
TimesTen 11g adds two major new capabilities:
1. Automatic client connection failover for client/server connections. Think of this as very similar to Oracle DB TAF and FAN. This does not require VIPs or Clusterware since it is implemented completely within TimesTen. However it works very well when used in onjunction with Clusterware.
2. A deep integration between TimesTen and Oracle Clusterware. All aspects of Timesten A/S pair definition, deployment, management and recovery are handled by Clusterware. There is just a single configuration file and a single TimesTen utility (ttCWAdmin) involved. Of course you need a properly configured Clusterware setup first which will require some form of shared storage (for OCR and voting disks) but TT storage (checkpoint and log files) does not need to be on shared storage. Setting up TT for use with Clusterware is very quick and easy (maybe 30 minutes the first time you do it and much quicker thereafter once you know what you are doing). From then on Clusterware will manage all aspects of failover and recovery completely automatically. VIPs are not required but can be used if desired e.g. for application failover purposes. Clusterware can also manage the failover of direct mode applications. Also, you can define automated backup cycles and spare nodes that can be used if a node suffers some permanent failure. The Clusterware integration offers very rich functionality but also very fast failover (typically just a few seconds in my testing).
Hope that helps clarify.
Chris

Error connecting to Salesforce using a Web Service Adapter

Hi,
I'm working on a connection from Data Services 4.2 to Salesforce using a Web Service Adapter.
I've setup up the adapter (including JVM parameters to use a HTTP proxy), created a Datastore based on the adapter and built a batch job that calls the login operation and initiates a sessions towards Salesforce.
When I execute the batch job I get an error message that says:
Error calling function <login>: <Web Services client unable to create a SOAP request to send to server. Error: The current node has been removed using a method other than Iterator#remove()>.
The trace log for the Web Service Adapter contains the same error message and has some additional info.
4/16/15 1:17:25 PM Thread[Thread-10,5,main] Handle request starting for operation: login
4/16/15 1:17:26 PM Thread[Thread-10,5,main] Entering addDocumentMessage()...
4/16/15 1:17:26 PM Thread[Thread-10,5,main] Entering addHeadersToEnvelope()...
4/16/15 1:17:26 PM Thread[Thread-10,5,main] Web Services client unable to create a SOAP request to send to server. Error: The current node has been removed using a method other than Iterator#remove()
4/16/15 1:17:26 PM Thread[Thread-10,5,main] Remove message listener for message type [adapter.WSAdapter.__STREAM_FUNCTION.1].
4/16/15 1:17:26 PM Thread[Thread-10,5,main] Stopping web service function call operation
4/16/15 1:17:26 PM Thread[Thread-10,5,main] Receive message: BrokerMessage(
_e.ErrorsTo=com.acta.adapter..client.dataAndMetadata_8
_e.Timestamp=Thu Apr 16 13:17:26 2015
_e.SourceTimeoutLength=90000
_e.MessageID=16
_e.Destination=com.acta.adapter.webservice.adapter.WebServiceAdapter.data_2
_e.MessageType=MSG_ADAPTER_END_OPER
_e.ReplyTo=com.acta.adapter..client.dataAndMetadata_8
_e.CorrelationID=15_com.acta.adapter..client.dataAndMetadata_8
_a.MSGFIELD_ADAPTER_SESSION_ID=2
_e.Source=com.acta.adapter..client.dataAndMetadata_8
_a.MSGFIELD_ADAPTER_OPER_ID=1)
I've searched for any additional tracing/logging on the server but I haven't found anything relevant. Can anyone help me determining what the cause of this error is so I can solve this?
Thanks,
- Ian

Hi,
I'm working on a connection from Data Services 4.2 to Salesforce using a Web Service Adapter.
I've setup up the adapter (including JVM parameters to use a HTTP proxy), created a Datastore based on the adapter and built a batch job that calls the login operation and initiates a sessions towards Salesforce.
When I execute the batch job I get an error message that says:
Error calling function <login>: <Web Services client unable to create a SOAP request to send to server. Error: The current node has been removed using a method other than Iterator#remove()>.
The trace log for the Web Service Adapter contains the same error message and has some additional info.
4/16/15 1:17:25 PM Thread[Thread-10,5,main] Handle request starting for operation: login
4/16/15 1:17:26 PM Thread[Thread-10,5,main] Entering addDocumentMessage()...
4/16/15 1:17:26 PM Thread[Thread-10,5,main] Entering addHeadersToEnvelope()...
4/16/15 1:17:26 PM Thread[Thread-10,5,main] Web Services client unable to create a SOAP request to send to server. Error: The current node has been removed using a method other than Iterator#remove()
4/16/15 1:17:26 PM Thread[Thread-10,5,main] Remove message listener for message type [adapter.WSAdapter.__STREAM_FUNCTION.1].
4/16/15 1:17:26 PM Thread[Thread-10,5,main] Stopping web service function call operation
4/16/15 1:17:26 PM Thread[Thread-10,5,main] Receive message: BrokerMessage(
_e.ErrorsTo=com.acta.adapter..client.dataAndMetadata_8
_e.Timestamp=Thu Apr 16 13:17:26 2015
_e.SourceTimeoutLength=90000
_e.MessageID=16
_e.Destination=com.acta.adapter.webservice.adapter.WebServiceAdapter.data_2
_e.MessageType=MSG_ADAPTER_END_OPER
_e.ReplyTo=com.acta.adapter..client.dataAndMetadata_8
_e.CorrelationID=15_com.acta.adapter..client.dataAndMetadata_8
_a.MSGFIELD_ADAPTER_SESSION_ID=2
_e.Source=com.acta.adapter..client.dataAndMetadata_8
_a.MSGFIELD_ADAPTER_OPER_ID=1)
I've searched for any additional tracing/logging on the server but I haven't found anything relevant. Can anyone help me determining what the cause of this error is so I can solve this?
Thanks,
- Ian

Problem in using OracleAS Web Cache as Load Balancer

I have two machines:
aimssrv.world.com and aimsrep.world.com.
Both of above machines are running Redhat Linux AS 4.
On both machines, I have installed Oracle Forms and Reports 10g Services. I have deployed my application on both machines.
I am able to access my application at aimssrv.world.com by doing:
http://aimssrv.world.com:7778/forms/frmservlet?config=aims
and I am also able to access my application at aimsrep.world.com by doing:
http://aimsrep.world.com:7778/forms/frmservlet?config=aims
I have implemented OracleAS Web Cache at machine aimssrv.world.com, and have enabled the Load Balancing.
In Origin Servers, its showing me two servers:
Host => aimssrv.world.com, PORT=> 7778, Routing=> Enabled, CAPACITY=>100, Failover Threshold=>5, PING URL=>/, PROTOCOL=>HTTP
Host => aimsrep.world.com, PORT=> 7778, Routing=> Enabled, CAPACITY=>100, Failover Threshold=>5, PING URL=>/, PROTOCOL=>HTTP
In Site Definition, I have following information:
Host Name=> aimssrv.world.com, PORT=>7777
In site-to-server mapping, I have following information:
Priority      Host Name      Port      ESI Content Policy      Host Name      Port      Proxy
1      aimssrv.world.com      7777      Unrestricted      aimssrv.world.com      7778      No
aimsrep.world.com      7778                                    No
2      *      7777           Exclude Fragments      aimssrv.world.com      7778      No
3      *      *           Exclude Fragments      aimssrv.world.com      7778      No
In Session Binding, I have selected "JSESSIONID" as session, and "OC4J-based" as session binding mechanism.
Now please guide me as how would I run my application by using the OracleAS Web Cache?
What would be the URL?
Do I need to make any changes in httpd.conf files of aimssrv.world.com and aimsrep.awc.com?
Please guide.
Thanks and regards

hi,
i hv recently configured webcache load-balancing for my 2 mid-tiers.I did not upgrade pre-requisite webcache upgrade patch 4569559 to my 10g rel 2 10.1.2.0.2 OAS and it still worked a bit but I do have some doubts why oracle recommends installing this patch before configuring webcache load-balancing.Have u?
btw u need to collapse all the features of webcache of caching to turn on http load-balancing.U need to add a parameter to internal.xml (LOADBALANCE ON="YES") and register origin servers of both servers with each other and map ur sites so that origin servers of both servers will cater sites of server1 and server2 at the same time.
what worked for me is i registered origin server of server1 at server2 and origin server of server2 at server1 and mapped site of server1 (http://server1:port/forms/frmservlet?config=something) to work with origin server of server2 as well at site-to-server page so that origin servers of both servers will load-balance my server1 site and vice-versa.
But still its not seamless.The initial site request was still being routed to the server which is DOWN first and not seamlessly routed to other server which is UP.Maybe webcache upgrade patch would hv done this seamlessly????
Edited by: anandk on Oct 26, 2009 6:28 PM

Error while installing Service Manager 4.1 (Unsupported major.minor version)

Hi All,
I have installed SMP 3.0 and I am installing Service Manager 4.1 on this server.
I am folliwng the document - CRMSM41_Installation for installation of SM 4.1
After installation , I configured the JavaBE.ini file and Agentry.ini. . This is the folder structure -
When I tried to check the connection using ConnectTest.bat file I am getting the below error
INI file: D:\SAP\MobilePlatform3\Server\configuration\com.sap.mobile.platform.se
rver.agentry.application\JavaBE.ini
*** Caught exception: com/syclo/agentry/Server : Unsupported major.minor version
51.0
release::releasing connection
release::complete.
Press any key to continue . . .
At present I have JDK1.6.0_51,. Do I need to modify the Java version ?
Please advise how to corect this issue
Thanks and Regards
Neha Mahanty

Hi Bill,
Yes after the correct JDK the connection test was successful. I will now deploy the application in the server. I need to go through the deployment steps to proceed further.
The connection test looks like -
INI file: D:\SAP\MobilePlatform3\Server\configuration\com.sap.mobile.platform.se rver.agentry.application\JavaBE.ini
Encoding: ASCII
reading user credentials from [SERVICE_LOGON] section
connecting as...
clientNum=100
sysNum=01
host=<My Host Name>
name=sycloadm
openCustomConnection::begin
*** Caught exception: null
release::releasing connection
closeConnection::begin
release::complete.
Press any key to continue . . .
Thanks
Neha

Error in SBO Service Manager

Dear All,.
I have a problem in SBO Service Manager. When I'm opening the Service Manager, the service seem not installed (blank) but when I'm looking in the Windows Server --> Administrative Tools --> Service, all the item in service manager is already installed and running.
I'm already trying to remove SAP Server and Server Tools and then doing clean installation but the problem is not solved. I'm already tried to reinstall Microsoft SQL Server 2005 but still the problem is not solved.
I'm using SAP Business One 2007A Pl 49 and Windows Server 2003 Standard Edition.
Pls help me to solve this problem...
Thanks for your help

Dear Gordon,
The Server OS is Microsoft Windows Server 2003 R2 standard Edition Service Pack 1
By the way, congratulation for your achievement...That's very fantastic that you already achieve more than 35.000 point...I'am also thank you for the answer that you give.. It's really help me a lot...
Thanks again

Error while executing application using Oracle Business Process Workspace

Hi all,
I created a simple application to find the length of the message entered and then re direct it to other task depending on the size. but while i try to run the application using Oracle Business Process Workspace, a new popup window is opened and my pre-described fields are shown, i fill the fields with values and when i try to submit/claim the task, it is giving me the following error :
Error Code: 502 Proxy Error. The request was rejected by the HTTP filter. Contact your ISA Server administrator. (12217)I contacted my server administrator as well for the same, but he didn't find any server side error.
Kindly help me solve this issue asap as i have my seniors waiting for this.
Thanks and Regards,
Debarati

Try to fragment the 'ear' in less than 64k blocks or don't transmit as long raw.
Please let me know if this works.

No roll storage space of length 2352 available for OCCURS area : Error in SAP Service Manager 4.0

Hi All,
I am facing one issue while downloading Service Orders in SAP Service Manager 4.0 with SMP 2.3 SP03
I am working in the development environment where I have 15 - 20 Service Orders. When I am transmitting the client it downloads the rest of the configurations properly like complex tables, data tables, rules, screens etc but as soon as it hits /SMCRM/BTX_DOSERVICEORD_GET it does not downloads anything. I get a session time out error and then the ATE gets crashed.
I checked in the logs where I found -
throwExceptionToClient::com.syclo.sap.component.serviceorder.steplet.ServiceOrderFetchSteplet::throwExceptionToClient::285::ServiceOrderFetchSteplet - No roll storage space of length 2352 available for OCCURS area.
2014/05/13 14:04:12.082: ServiceOrderFetchSteplet: doSteplet returned false; no data to process
As I said its in the development environment it has hardly 15 - 20 Service Orders but when checked with the basis team it is consuming all the 65GB RAM and hence could not proceed further.
Please let me know what could be the possible error and how can I fix this.
Please advise.
Thanks and Regards
Neha Mahanty
Tags edited by: Michael Appleby

Neha,
Only 15-20 service orders, but how much data on those orders? SM 4.0 brings down potentially a lot of data per service order, including:
Addresses,
Business Partners,
Categorizations,
Confirmations (and all the data under those),
History Records (There can be a lot of those),
Items,
Reference Objects (This could be a huge installed base).
You may need to debug the java and adjust what data is pulled down and/or examine the Service Orders to see where the bottle-neck is. You should also increase the timeouts in your Agentry.ini file. Those settings are in seconds.
Jason Latko - Senior Product Developer at SAP

Error in HelloWorld service using oracle web services manager(Test Engine)

Similar Messages

Maybe you are looking for