Error In HR report using PNP LDB

Hi ,
I am new to ABAP Hr , while writing a report using LDB pnp it is giving me an error like
" In Unicode programs, the "-" character cannot appear in names, as it
does here in the name "PNP-SW-IGNORELOCKEDRECORDS".
Can any one please help me what it is for , and how it can be removed .
Thanx

Hi abap,
1. do not worry,
2. Its just a warning message (and not an error message)
regards,
amit m.

Similar Messages

How to avoid default selection screen in HR interfaces(using pnp ldbs)

How to avoid default selection screen in HR interfaces(using pnp ldbs)

Dear Rakesh,
The report category is used to change the selection screen of programs that use the 'PNP' logical database.
See links bellow:
http://www.sapdevelopment.co.uk/hr/hr_repcat.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/15/229357553611d3967f00a0c9306433/frameset.htm
Report categories for selection screen in HR programming
Also visit the following blog:
/people/alvaro.tejadagalindo/blog/2006/02/19/how-to-deal-with-hr-payroll-reports
Regards,
Naveen.

How to use PNP LDB

Hi,
can anybody provide me demo code for using PNP ldb?
abc

tables pernr.
infotypes 0002.
data: begin of itab occurs 0,
      vorna like pa0002-vorna,
      end of itab.
data wa like line of itab.
*write 'abc'.
get pernr.
provide * from p0002
           BETWEEN PNPbegda AND PNPENDDA.
move p0002-vorna to itab-vorna.
append itab.
clear itab.
endprovide.
end-of-selection.
loop at itab.
write:/ itab-vorna.
endloop.

How to get locked records of a pernr while using PNP LDB

is there any way to retrieve locked records of a pernr
while using PNP LDB??currently the get pernr event is unable to load locked records of a pernr.

Hi,
PL use this piece of code in your Program..
INITIALIZATION.
PNP-SW-IGNORELOCKEDRECORDS = 'N'.
Regards,
Suresh Datti

Selection screen validation when using PNP LDB

Hi guys,
I want to validate my selection screen parameters.Thats is if somebody wants to run the program without giving any input parameters to the selection screen(trying to run the report with a blank screen) I want to pop up an error/information message so that it will return the selection screen.I am using PNP Logical database for my selection screen.Please help.Thanks in advance.
Thanks,
Karthik.

Welcome to SDN.
If you are using PNP logical data base then validating the fields will be little tricky...
You canc check all the other fields in START-OF-SELECTION and if they are empty return eroor. Remember all the field s on the scree... so I will suggest you to choose HR report Category accordingly.
Also,when it comes to date field then you need to check for the start and end dates rather than blank fields as SAP defaulted them to system start and end date.
Still, I will prefer to create a HE Report Category for the PNP database and use the screen while validating....that will be easy...

Problem while creating HR report with PNP LDB

Hi Experts,
I am working on HR Report using LDB PNP.
In HR REPORT CATEGORY,i have mentioned "___00003" in Master Data radio button.
Now i can create my own selection screen.In my Selection-Screen i am using pushbutton.
Code is:
SELECTION-SCREEN:
PUSHBUTTON 5(15) but1 USER-COMMAND cli1,
PUSHBUTTON 30(15) but2 USER-COMMAND cli2.
INITIALIZATION.
but1 = 'PDF FORMAT'.
but2 = 'FILE FORMAT'.
AT SELECTION-SCREEN.
CASE sscrfields.
    WHEN 'CLI1'.
      PERFORM PDF.
    WHEN 'CLI2'.
      PERFORM FILE.
ENDCASE.
While executing i have clicked on 2nd pusbutton.
It is going to CASE and also i am getting value of sscrfields = CLI2 .
also sy-subrc = 0.
but after that it is not going to WHEN condition.
Can anybody plz help me out in this.
Regards,
Ankur

SSCRFIELDS is a structure so you have to ask:
CASE SSCRFIELDS-UCOMM.
WHEN xx.
ENDCASE:

IN HR PAYROLL REPORT USING PNP LOGICAL DATABASE

Dear abapers,
                        when i ab runing HR payroll report usin PNP Logical database there are some error occurs.
            INCLUDE DBPNPCOM
                     IN UNICODE PROGRAMS, THE "-" CHARECTOR CAN NOT APPEAR IN NAME , AS IT DOES HERE IN THE NAME
                    PNP-SW-FOUND.
     INCLUDE DBPNPCOM
                   IN UNICODE PROGRAMS , THE "-" THE CHARECTOR CAN NOT APPEAR IN NAMES, AS IT DOES HERE IN THE NAME
                   PNP-SW-IGNORELOCKEDRECORDS.
     INCLUDE DBPNPCOM
                   IN UNICODE PROGRAMS , THE "-" THE CHARECTOR CAN NOT APPEAR IN NAMES, AS IT DOES HERE IN THE NAME
                   PNP-SW-ENQUEUEPERNR.
                        PLEASE GIVE ME SOLUTIONS .
                                                                     THANK YOU SIR.

Hi, please check, these might be warnings, not errors.

Error when running report using SDK

Hi, I am getting following error when I am running a report in boxi r2 sp3 on IIS. Infoview and CMC runs fine but SDK application is not able to connect to CMS. This error does not come all the time. It happens intermittently.
Error in RetrieveReport: Unable to connect to cluster @hisuatcluster to retrieve updated CMS member list. Logon cannot continue.
Anyone has seen this and any way to pin point the cause. We have used -ns and -port switch in the command line of CMS and all servers.
Thanks,

will try that. But we would not be leveraging cluster benefit then. What happens if that particilar CMS in cluster goes down.
Below is the logic of SDK.
1.     Create an EnterpriseSession by calling SessionMgr.Login(the credentials we use to connect on in the web.config file).
2.     Get a reference to the InfoStore with EnterpriseSession.GetService(u201CInfoStoreu201D)
3.     Get a reference to the report as an InfoObject by querying the InfoStore u2013 InfoStore.Query(u201CSELECT * FROM CI_INFOOBJECTS WHERE u2026u201D)
4.     Get a reference to the RASReportFactory u2013 EnterpriseSession.GetService(u201Cu201D, u201CRASReportFactoryu201D)
5.     Open the report using the InfoObject (line 3) and RASReportFactory (line 4) u2013 ReportClientDoc = ReportAppFactory.OpenDocument(InfoObject.ID, 0)
6.     Manipulate the reportu2019s connection information.
7.     Set the vieweru2019s report source with the report (this is commented out in the current tests) u2013 CrystalReportViewer.ReportSource = ReportClientDocument
8.     Close the session u2013 EnterpriseSession.Logoff()

Error creating Crystal Report using Stored Proc Universe

Hi,
I have created a stored procedure Universe, using the new feature available in XI R3.
This connects to an Oracle database, executing a PL/SQL procedure returning ref cursor.
I have created a WebI report using this Universe, which works fine and functions as expected.
So there are no problems with either my Oracle stored proc or the Universe.
However, I would like to create a Crystal report (2008) using the same Universe.
I can create the report ok - using the SP Universe.
When I attempt to refresh the data I get an error:
Failed to retrieve data from the database.
Details: ORA-06550: line 1, column 7:
PLS-00103: Encountered the symbol "." when expecting one of the following:
begin case declare etc etc
.................................My Procedure ...................
CREATE OR REPLACE PROCEDURE BIADM.Bo_Test_Report_R
(Deposit_Cursor IN OUT SYS_REFCURSOR)
IS
BEGIN
OPEN Deposit_Cursor FOR
SELECT DISTINCT foracid "A/C"
, acct_name "A/C Name", acct_opn_date "OP/Date", schm_code "SchmCode"
FROM gam@finrpt
WHERE acct_cls_flg ='N'
AND foracid ='2252020145001';
--AND cust_id ='CB2020145'
END Bo_Test_Report_R;
Please Give me solution as early as possible.
Masud Iqubal

Moved to Universe Design forum.

REP-300 Error while running report using App Server

Hi,
I am currently trying to run a report using the Application Server.
This report is being called from a form.
I am able to connect to the report server and all configurations seems to be correct.
But when I execute the report from the form, I am getting error "Unable to run report"
When I look at the error message in the Report Server queue, I find
"REP-300 Table or View does not exist.."
But that table does exist in the database.
What could be be the problem ?
Please help.
The code in the form that calls the report is
report_id := FIND_REPORT_OBJECT( report_name );
vc_user_name:=get_application_property(username);
vc_user_password:=get_application_property(password);
vc_user_connect:=get_application_property(connect_string);
vc_connect:=vc_user_name||'/'||vc_user_password||'@'||vc_user_connect;
SET_REPORT_OBJECT_PROPERTY(report_id ,REPORT_OTHER, 'paramform=yes p_user_connect='||vc_connect ||' p_servername=repsrv'||' p_action=<host>/reports/rwservlet?' );
v_rep := RUN_REPORT_OBJECT(report_id, parmlist_id);

The report is working perfectly fine when I run it from the Report Builder. I get the correct output.
I am getting this error when I try to run the report through a Report server.
I run the form from the Forms 10g builder. This form has a button "Run Report". When I click on the button the report is run using the Report server.
This is when I get the error.
There are other forms that are also called via the same form. Those work fine. The only difference between those forms and this one is that this one has user parameters passed to it. This one also has an attached library attached to it.
The code in the Form to call the report is
report_id := FIND_REPORT_OBJECT( report_name );
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESTYPE, FILE);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESFORMAT, 'pdf');
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_SERVER, 'rep-vena01-xp');
v_rep := RUN_REPORT_OBJECT(report_id, parmlist_id );
v_jobid := substr( v_rep, length( v_reportserver) + 2, length(v_rep) );
v_repstatus := REPORT_OBJECT_STATUS( v_rep );
IF ( v_repstatus = 'FINISHED' ) THEN
v_url := '/reports/rwservlet/getjobid' || v_jobid || '?server=' || v_reportserver ;
web.show_document( v_url, '_BLANK' );
END IF;

How MSS Report passes values to R/3 report using PNP logical db

Heloo Gurus,
I am having some trouble where in i have added a new custom(Z) report in the MSS ->My Staff -> Reporting under report category -> Time Management (MSS). I am not able to find how the value of org unit which is selected on portal screen is passed to report in R/3 which is using PNP logical db.
I tested in debugging but selection screen parameter PNPORGEH contains nothing.
Many Thanks in advance for the help.

Anyone ?
plz update.

Getting error in sheduling report using InfoStore

Hi I am trying to shedule a report using InfoStore, I am getting excetpin like
Exception in thread "main" java.lang.UnsupportedOperationException
     at java.util.AbstractList.add(AbstractList.java:151)
     at java.util.AbstractList.add(AbstractList.java:89)
     at Scheduler.main(Scheduler.java:89)
Please find the code below
IInfoObjects objectsToSchedule = infostore.newInfoObjectCollection();
                objectsToSchedule.add(report);
                infostore.schedule(objectsToSchedule);

Hi Jhon,
Thanks for your promt reploy,
Could you please look into my code pasted below, I wanted to shedule a report to run pl. see it once
Thanks
Damodar
public class Scheduler {
   public static void main(String[] args) throws ReportSDKException {
    String cms = "XX";
    String username = "XX";
    String password = "XX";
    String auth = "XX";
    IEnterpriseSession enterpriseSession = null;
    try {
         ISessionMgr sm = CrystalEnterprise.getSessionMgr();
         enterpriseSession = sm.logon(username, password, cms, auth);
         IInfoStore oInfoStore=(IInfoStore)enterpriseSession.getService("", "InfoStore");
         IInfoObject oInfoObject = null;
         String requestReportName = "EMP_DETAIL";
         String query = "SELECT * FROM CI_INFOOBJECTS WHERE SI_NAME = '" + requestReportName + "'";
         IInfoObjects oInfoObjects = oInfoStore.query(query);
         System.out.println("oInfoObjects.size : "+oInfoObjects.size());
        if (oInfoObjects.size() > 0)
               //Use the InfoObject.SchedulingInfo property to retrieve an instance of the SchedulingInfo object.
                  System.out.println("%%%%%%"+(IInfoObject) oInfoObjects.get(0));
                  IInfoObject report = (IInfoObject) oInfoObjects.get(0);
                ISchedulingInfo scheduleInfo = report.getSchedulingInfo();
               // Set the scheduling options.
               // The report will be set to run immediately and only once.
                scheduleInfo.setType(CeScheduleType.ONCE);
                scheduleInfo.setRightNow(true);
               // Schedule the report using the InfoStore object.
                IInfoObjects objectsToSchedule = oInfoStore.newInfoObjectCollection();
                objectsToSchedule.add(report);
                oInfoStore.schedule(objectsToSchedule);
            else {
               System.out.println("Report not found.");
         catch (SDKException e) {
                e.printStackTrace();
                System.out.println("Error -->"+e.getMessage());

Error with crystal report using SAP GUI

Hi,
While using crystal report in sap gui i get the following error. I already googled and only found one thing on this forum that talks about this and it was never solve. Can you please help me? Thank you
Errors in Crystal Reports Installation(SupportsSAPQuery)
Message no.ALVHT218
Diagnosis:
This function requires that Seagate Crystal Reports and the Functional Area drivers(InfosetDrivers) from Seagate software are installed.
This sotware is either not available on your frontend or has been installed with errors
System Response:
The action has been terminated
Once again
thank you

Hi
Please check if you have installed all the SAP transports which are required for Crystal Reports to run based off SAP.
Regards
Sourashree

Get a Report crashed error while running report using the mode character

Hello,
I'am getting an "Enable to run report - Report as crashde" issue only when I'am running reports using the mode character. The same report with desformat pdf never has any problems. I have changed the englife (set to one) increase the cachesize but I still have the same issue.
I'm using report 6i and Oracle 8i.
Thanks in advance for your help.
Regards,
Laurent.

Hi Thanks for the response,
In fact the report in character mode is working fine in my environnement but is not working on my customer environnement (which is supposed to be the same as mine). I was thinking of cache size issue or something like this ?
Regards,
Laurent.

Error when exporting reports using MAPI

We created a .NET class that wraps CR 2010 .NET Crystal Reports functions and made it COM visible. This class is used to create a COM object in a js script which in turn used to export reports to a PDF file with the destination MAPI.
It exports reports just fine without any errors however if prior to instantiation the exporting class we instantiate a class that has nothing to do with the Crystal Reports functions, our exporting object throws u201CExternal component has thrown an exception.u201D error when exporting. It appears that it has something to do with the SideBySide feature. I was wondering if somebody knows what causes this and if there is a way to fix this problem.
Thanks for your help!
 
 
Below are 2 procmon.exe outputs, the first when exporting works and the second when it doesnu2019t
 
 
 
1) Procmon.exe output when exporting works fine
 
 
 HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS Desired Access: Read
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS KeySetInformationClass: KeySetHandleTagsInformation, Length: 0
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\CommonFilesDir SUCCESS Type: REG_SZ, Length: 72, Data: C:\Program Files (x86)\Common Files
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL FAST IO DISALLOWED
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
 7:16:30.7403615 AM test.exe 4396 FASTIO_QUERY_INFORMATION C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryBasicInformationFile, CreationTime: 9/17/2010 10:50:22 AM, LastAccessTime: 11/10/2010 5:47:02 PM, LastWriteTime: 9/17/2010 10:50:22 AM, ChangeTime: 2/17/2011 11:04:53 AM, FileAttributes: A
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Data/List Directory, Execute/Traverse, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL FILE LOCKED WITH ONLY READERS SyncType: SyncTypeCreateSection, PageProtection:
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS SyncType: SyncTypeOther
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Image Base: 0x79260000, Image Size: 0x1073000
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryNameInformationFile, Name: \Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Generic Read, Disposition: Open, Options: Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide SUCCESS Desired Access: Read
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide SUCCESS KeySetInformationClass: KeySetHandleTagsInformation, Length: 0
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide\PreferExternalManifest NAME NOT FOUND Length: 20
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Generic Read, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryBasicInformationFile, CreationTime: 9/17/2010 10:50:22 AM, LastAccessTime: 11/10/2010 5:47:02 PM, LastWriteTime: 9/17/2010 10:50:22 AM, ChangeTime: 2/17/2011 11:04:53 AM, FileAttributes: A
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 
 
 //////////////////////////////////////////////////////////////////////
 2) Procmon.exe output when exporting doesnu2019t work, notice that it tries to open MSO.dll at the same location as in the output above but fails, it tries then to open it at several other locations and fails
 
 
 HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS Desired Access: Read
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS KeySetInformationClass: KeySetHandleTagsInformation, Length: 0
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\CommonFilesDir SUCCESS Type: REG_SZ, Length: 72, Data: C:\Program Files (x86)\Common Files
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL FAST IO DISALLOWED
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryBasicInformationFile, CreationTime: 9/17/2010 10:50:22 AM, LastAccessTime: 11/10/2010 5:47:02 PM, LastWriteTime: 9/17/2010 10:50:22 AM, ChangeTime: 2/17/2011 11:04:53 AM, FileAttributes: A
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Data/List Directory, Execute/Traverse, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL FILE LOCKED WITH ONLY READERS SyncType: SyncTypeCreateSection, PageProtection:
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS SyncType: SyncTypeOther
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Users\Paul\projects\temp\test\Debug\MSO.dll FAST IO DISALLOWED
 C:\Users\Paul\projects\temp\test\Debug\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
 C:\Program Files (x86)\Microsoft Office\Office12\MSO.dll FAST IO DISALLOWED
 C:\Program Files (x86)\Microsoft Office\Office12\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
 C:\Windows\SysWOW64\MSO.dll FAST IO DISALLOWED
 C:\Windows\SysWOW64\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
 C:\Windows\system\MSO.dll FAST IO DISALLOWED
 C:\Windows\system\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
 C:\Windows\MSO.dll FAST IO DISALLOWED
 C:\Windows\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a

I tried to run exporting code in a .net application and got the same error. I first created the COM object that causes the problem and then ran exporting CR functions. It works fine if I run the code without creating the COM object.
Below is the code I used.
 Type objClassType = Type.GetTypeFromProgID("ebms.main");
 object objMain = Activator.CreateInstance(objClassType);
 try
 object[] p = new object[4];
 p[0] = "C:\\ebms\\co1";
 p[1] = "C:\\ebms\\co1";
 p[2] = "Administrator";
 p[3] = "";
 objClassType.InvokeMember("LoginToCompany", System.Reflection.BindingFlags.InvokeMethod, null, objMain, p);
 catch (Exception ex)
 this.RPTDoc = new ReportDocument();
 this.RPTDoc.Load(@"C:\\Users\\Paul\\Desktop\\AR Customer List.rpt");
 PdfRtfWordFormatOptions pdfOpts = ExportOptions.CreatePdfRtfWordFormatOptions();
 MicrosoftMailDestinationOptions mailOpts = ExportOptions.CreateMicrosoftMailDestinationOptions();
 ExportOptions exportOpts = new ExportOptions();
 pdfOpts.UsePageRange = false;
 exportOpts.ExportFormatOptions = pdfOpts;
 mailOpts.MailMessage = "something";
 mailOpts.MailSubject = "something";
 mailOpts.MailToList = "emailaddress";
 exportOpts.ExportDestinationOptions = mailOpts;
 exportOpts.ExportDestinationType = ExportDestinationType.MicrosoftMail;
 exportOpts.ExportFormatType = ExportFormatType.PortableDocFormat;
 try
 this.RPTDoc.Export(exportOpts);
 catch (Exception ex)
 MessageBox.Show(ex.Message, "Error", MessageBoxButtons.OK, MessageBoxIcon.Error);

Error In HR report using PNP LDB

Similar Messages

Maybe you are looking for