Error in installation of 64 bit 11g client on solaris sparc64 bit

hi,
i am getting below error while installing the 11g 64 bit client on solaris sparc 64 bit machine.
following error is occurred while installing 64 bit oracle 11.2 client on Solaris 64-bit sparcv9 OS:
Error in invoking target 'mkldflags ntcontab.o nnfgt.o' of makefile
kindly assist.
Thanks,
-Shubhen

user12052679 wrote:
hi,
i am getting below error while installing the 11g 64 bit client on solaris sparc 64 bit machine.
following error is occurred while installing 64 bit oracle 11.2 client on Solaris 64-bit sparcv9 OS:
Pl read the Install Guide to ensure you meet all of the pre-installation requirements - http://docs.oracle.com/cd/E11882_01/install.112/e24347/pre_install.htm#CIHFICFD
Error in invoking target 'mkldflags ntcontab.o nnfgt.o' of makefile
kindly assist.
Thanks,
-ShubhenHTH
Srini

Similar Messages

Error While Installation of SOA SUITE 11g

Hi
I am installing SOA SUITE 11g on Oracle Linux 4.
I have already installed Oracle database 11g
I have installed Weblogic server 10.3.x
I have checked oracle database , i am able to run it successfully.
I have checked weblogic server too, its too running successfully.
I have logged into server as *"oracle" user* and trying to run runInstaller from command prompt
the trace for error getting generated is below. plz let me know where i am making mistake.
I am new to SOA SUITE n related technologies..
++[oracle@localhost ~]$ cd SOA_SUITE/Disk1++
++[oracle@localhost Disk1]$ ls++
++doc install runInstaller setup.exe stage++
++[oracle@localhost Disk1]$ ./runInstaller++
++Starting Oracle Universal Installer...++
++Checking if CPU speed is above 300 MHz. Actual 1992 MHz Passed++
++Checking Temp space: must be greater than 150 MB. Actual 233511 MB Passed++
++Checking swap space: must be greater than 500 MB. Actual 5023 MB Passed++
++Checking monitor: must be configured to display at least 256 colors++
++>>> Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<++
++Some requirement checks failed. You must fulfill these requirements before++
++continuing with the installation,++
++Continue? (y/n) [n] y++
++>>> Ignoring required pre-requisite failures. Continuing...++
++Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-02-23_05-49-23PM. Please wait ...++
++Please specify JRE/JDK location ( Ex. /home/jre ), <location>/bin/java should exist :++
++Please specify a valid JRE/JDK location :/root/Oracle/Middleware/jdk160_14_R27.6.5-32++
++Please specify a valid JRE/JDK location :++
I am trying to give JRE/JDK location which i got when i was installing weblogic server but its not accepting that and i am getting
"Please specify a valid JRE/JDK location : " message again.
Please let me know how i can i get out of this error.
Thanks
vishnu kumar

Hi,
check for some spaces or character which might be going while you specify the JRE locations, alternatively you can call runInstaller with
-jreLoc ,i.e;have the path in the cmd.
./runInstaller -jreLoc /root/Oracle/Middleware/jdk160_14_R27.6.5-32
which should work.
regards,
Jitendra

Error while accessing Oracle Virtual Directory 11g client view.

Hi everyone,
I'm a beginner in Oracle IDAM suite 11g.
I'm facing an issue while configuring LDAP adapter in Oracle Virtual Directory.
LDAP adapter is configured for ODSEE instances. Currently I've configured two instances.
For these adapters, the entries from ODSEE instances are getting populated under Adapter browser but under Client View while expanding the root we're getting the following error:
LDAPException: malformedRequest (2) Protocol Error LDAPException: Server Message: Protocol Error
In the diagnostic.log file I'm getting the following error:
[2012-02-28T11:38:55.255+05:30] [octetstring] [ERROR] [OVD-60335] [com.octetstring.vde.dsmlv2.ImportExportVDE] [tid: 20] [ecid: 0000JMcs_zPEWNppSO1Fic1FHBss000083,0] Failure in getting LDAP 1.[[
com.octetstring.vde.util.DirectoryException: LDAP Error 2 : localhost:1489
     at com.octetstring.vde.backend.jndi.BackendJNDI.getInternalConnection(BackendJNDI.java:1023)
     at com.octetstring.vde.backend.jndi.BackendJNDI.getConnection(BackendJNDI.java:920)
     at com.octetstring.vde.backend.jndi.ConnectionHandle.getHolder(ConnectionHandle.java:382)
     at com.octetstring.vde.backend.jndi.ConnectionHandle.search(ConnectionHandle.java:233)
     at com.octetstring.vde.backend.jndi.JNDIEntrySet.initialize(JNDIEntrySet.java:203)
     at com.octetstring.vde.backend.jndi.BackendJNDI.get(BackendJNDI.java:723)
     at com.octetstring.vde.chain.Chain.nextGet(Chain.java:297)
     at com.octetstring.vde.chain.plugins.performance.MonitorPerformance.monitorSearch(MonitorPerformance.java:506)
     at com.octetstring.vde.chain.plugins.performance.MonitorPerformance.get(MonitorPerformance.java:444)
     at com.octetstring.vde.chain.Chain.nextGet(Chain.java:308)
     at com.octetstring.vde.chain.PluginChain.runGet(PluginChain.java:234)
     at com.octetstring.vde.chain.PluginManager.runGet(PluginManager.java:489)
     at com.octetstring.vde.chain.PluginManager.runGet(PluginManager.java:427)
     at com.octetstring.vde.backend.AdapterServiceInterface.getByAdapter(AdapterServiceInterface.java:649)
     at com.octetstring.vde.backend.AdapterServiceInterface.get(AdapterServiceInterface.java:514)
     at com.octetstring.vde.backend.BackendHandler.get(BackendHandler.java:592)
     at com.octetstring.vde.chain.Chain.nextGet(Chain.java:289)
     at com.octetstring.vde.chain.plugins.performance.MonitorPerformance.monitorSearch(MonitorPerformance.java:506)
     at com.octetstring.vde.chain.plugins.performance.MonitorPerformance.get(MonitorPerformance.java:450)
     at com.octetstring.vde.chain.Chain.nextGet(Chain.java:308)
     at com.octetstring.vde.chain.plugins.AclCheckerPlugin.get(AclCheckerPlugin.java:398)
     at com.octetstring.vde.chain.Chain.nextGet(Chain.java:308)
     at com.octetstring.vde.chain.PluginChain.runGet(PluginChain.java:234)
     at com.octetstring.vde.chain.PluginManager.runGet(PluginManager.java:489)
     at com.octetstring.vde.chain.PluginManager.runGet(PluginManager.java:427)
     at com.octetstring.vde.chain.GlobalServicesInterface.runGet(GlobalServicesInterface.java:207)
     at com.octetstring.vde.dsmlv2.ImportExportVDE.doGet(ImportExportVDE.java:428)
     at com.octetstring.vde.dsmlv2.ImportExportVDE.process(ImportExportVDE.java:171)
     at com.octetstring.vde.dsmlv2.DsmlService.doPost(DsmlService.java:186)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:358)
     at org.mortbay.jetty.servlet.WebApplicationHandler$Chain.doFilter(WebApplicationHandler.java:342)
     at com.octetstring.vde.admin.AuthFilter.doFilter(AuthFilter.java:259)
     at org.mortbay.jetty.servlet.WebApplicationHandler$Chain.doFilter(WebApplicationHandler.java:334)
     at com.octetstring.webgateway.filters.DOSFilter.doFilter(DOSFilter.java:67)
     at org.mortbay.jetty.servlet.WebApplicationHandler$Chain.doFilter(WebApplicationHandler.java:334)
     at org.mortbay.jetty.servlet.WebApplicationHandler.dispatch(WebApplicationHandler.java:286)
     at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:567)
     at org.mortbay.http.HttpContext.handle(HttpContext.java:1807)
     at org.mortbay.jetty.servlet.WebApplicationContext.handle(WebApplicationContext.java:526)
     at org.mortbay.http.HttpContext.handle(HttpContext.java:1757)
     at org.mortbay.http.HttpServer.service(HttpServer.java:879)
     at org.mortbay.http.HttpConnection.service(HttpConnection.java:789)
     at org.mortbay.http.HttpConnection.handleNext(HttpConnection.java:960)
     at org.mortbay.http.HttpConnection.handle(HttpConnection.java:806)
     at org.mortbay.http.SocketListener.handleConnection(SocketListener.java:218)
     at org.mortbay.util.ThreadedServer.handle(ThreadedServer.java:331)
     at org.mortbay.util.ThreadPool$PoolThread.run(ThreadPool.java:520)
Caused by: javax.naming.CommunicationException: localhost:1489 [Root exception is java.lang.NullPointerException]
     at com.sun.jndi.ldap.Connection.<init>(Connection.java:207)
     at com.sun.jndi.ldap.LdapClient.<init>(LdapClient.java:118)
     at com.sun.jndi.ldap.LdapClient.getInstance(LdapClient.java:1580)
     at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2652)
     at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:293)
     at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(LdapCtxFactory.java:175)
     at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(LdapCtxFactory.java:193)
     at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(LdapCtxFactory.java:136)
     at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:66)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
     at javax.naming.InitialContext.init(InitialContext.java:223)
     at javax.naming.ldap.InitialLdapContext.<init>(InitialLdapContext.java:134)
     at com.octetstring.vde.backend.jndi.JNDIConnectionPool.createCtx(JNDIConnectionPool.java:422)
     at com.octetstring.vde.backend.jndi.JNDIConnectionPool.create(JNDIConnectionPool.java:453)
     at com.octetstring.vde.backend.jndi.JNDIConnectionPool.getLdapContext(JNDIConnectionPool.java:276)
     at com.octetstring.vde.backend.jndi.JNDIConnectionPool.checkOutContext(JNDIConnectionPool.java:167)
     at com.octetstring.vde.backend.jndi.BackendJNDI.getInternalConnection(BackendJNDI.java:1009)
     ... 48 more
Caused by: java.lang.NullPointerException
     at com.octetstring.vde.backend.jndi.OvdJndiWorkerCoordinator.register(OvdJndiWorkerCoordinator.java:100)
     at com.octetstring.vde.backend.jndi.OvdJndiSocket.getInputStream(OvdJndiSocket.java:95)
     at com.sun.jndi.ldap.Connection.<init>(Connection.java:190)
     ... 65 more
Kindly help me resolving this issue.

Did you ever fixed or resolved the issue ? If yes, could you please share the reason for issue ?
Getting following errors in OVD logs :-
[ERROR] [OVD-60335] [com.octetstring.vde.dsmlv2.ImportExportVDE] [tid: 25] [ecid: 0000J_Gc3Qu0ZrqawLicMG1G6Pz^00000J,0] Failure in getting LDAP 1.[[
com.octetstring.vde.util.DirectoryException: LDAP Error 32 : No Such Object
[OVD-40066] [com.octetstring.vde.backend.jndi.ConnectionHandle] [tid: 25] [ecid: 0000J_Gc3Qu0ZrqawLicMG1G6Pz^00000J,0] Remote Server Failure:l120814vaps2013:21389.[[
javax.naming.NameNotFoundException: [LDAP: error code 32 - No Such Object]; remaining name 'ou=int,ou=people,dc=domain,dc=com',dc=com'

7.1 Trial: Error during installation of Mindb and Mobile Client

We are using a barcode scanner running on Windows Mobile 5.0. When I use the SP03 trial to install the mobile client, I get the following information for every application besides the CreMe (the error is shown on the barcode scanner):
The program you have installed may not display properly because it was designed for a previous version of Windows Mobile Software.
How is this possible and what does this mean? These applications state that they are supported on Windows Mobile 5.0.
I continue anyway but when I try to start the Mobile Client I get a pop-up stating Creme is starting, then running, then nothing. I read it can take up to 2 minutes to load the client so I gave it 10 minutes with no result.
I have uninstalled and reinstalled multiple times (everything, Creme, mindb, mobile client) and it doesn't work. I am using Active Sync 4.5.
Any help is greatly appreciated.

Thanks for the quick reply. It is a Creme error. I tried the licensed version from SAP first, then tried the 30 day copy and neither works. They both have the same errors.
See the jscpout.txt
NSIcom Ltd., CrEme(tm)
CrE-ME J2ME(tm)
CrE-ME V4.12 B142.190307 19-March-2007
MemoryLimit=64000Kb
EBCI(TM) Interpreter V1.00,
Copyright 1998-2002 by Bytecodes, Inc.
2008-05-15 09:20:11 ... Thread: com.sap.tc.mobile.cfs.startup.pda.Startup Error: Error creating initial tables -->
2008-05-15 09:20:11 ... Thread: com.sap.tc.mobile.cfs.startup.pda.Startup Error: Error dropping initial tables -->
2008-05-15 09:20:14 ... Thread: com.sap.tc.mobile.cfs.startup.pda.Startup Error: Insert sql executation failed -->
2008-05-15 09:20:14 ... Thread: com.sap.tc.mobile.cfs.startup.pda.Startup Error: Error storing model -->
2008-05-15 09:20:15 ... Thread: com.sap.tc.mobile.cfs.startup.pda.Startup Fatal: Cannot initialize framework -->
java.lang.IllegalArgumentException: Error storing model
     at com.sap.tc.mobile.cfs.meta.conthandler.MetaDeployTimeUtils.storeModel()
     at com.sap.tc.mobile.cfs.meta.conthandler.MetaDeployTimeUtils.deploySystemMBOs()
     at com.sap.tc.mobile.cfs.init.FrameworkInitializer.init()
     at com.sap.tc.mobile.cfs.startup.pda.Startup.main()
Error starting the framework
java.lang.reflect.InvocationTargetException: java.lang.IllegalStateException: Cannot initialize framework
     at com.sap.tc.mobile.cfs.init.FrameworkInitializer.init()
     at com.sap.tc.mobile.cfs.startup.pda.Startup.main()
CrEme jsPexit() called with status=1
Sorry for the bad formatting. Any help is appreciated!

Oracle 11g client installation on Solaris in non GUI mode

Hi,
I want to know if there is a way i can install Oracle 11g client on Solaris 10 machine in non GUI mode (ie. i want to do it from a command based terminal)
Thanks
Anup

Hi Anup
You have two ways to install it
1) Client installation without response file
Please Refer to Doc ID 885643.1
2) With Response file
Refer to the document available in Document library
Document Oracle® Database Client Installation Guide
11g Release 2 (11.2) for Solaris Operating System
Note: from 11gR2 onwards you can create a response file from GUI also and then use it later on for silent installation.
Hope this is helpful for You
Regards
Sudhir
Edited by: user13090769 on Sep 1, 2010 10:55 AM
Edited by: user13090769 on Sep 1, 2010 10:56 AM

Oracle 11g client installation on Windows 7 Home Premium (64-bit)

I'm having trouble installing the Oracle 11g client installation on Windows 7 Home Premium (64-bit) machine.
Can Oracle 11g client even be installed on the Windows 7 Home Premium 64?
Thanks!

Hi;
As mention here home OS not supported, so as mention here again if you make some googling you can find link&blog which is mention to create WM machine, install linux(you can use OEL linux which is free and can be download from e-delivery site) than you can make 11g installation on it
Regard
Helios

Windows 7, Oracle 11g Client Post-Installation Error

Hello all--
Background Info:
- I have installed Oracle 11g Client (32-bit) on my Windows 7 Professional (32-bit) workstation.
- The ORACLE_HOME directory (in my case C:\Oracle\Ora11g) is in the PATH environment variable.
- I have created TNS_ADMIN as an environment variable that points to a network folder that contains our tnsnames.ora and sqlnet.ora.
- I can tnsping our servers and sqlplus connects without issue.
- I am logged in as a regular network user (added into the local Administrators group on my machine).
The problem is that I cannot connect using a user or system DSN in the Microsoft ODBC Administrator, BUT, I can connect with a DSN when I am logged in with the local Administrator account. I have verified the DSNs are setup correctly. The error I get is the ORA-12154 error.
Here is the exact error as it appears:
Unable to connect
SQLState=08004
[Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified
If I copy the tnsnames.ora file from the network to my machine and remove/redirect TNS_ADMIN to the %ORACLE_HOME%\NETWORK\ADMIN folder, it works with my user account.
Any thoughts?
Thanks!
Matt

Hi All--
I figured out what the problem was and I wanted to share what our solution was.
Basically, when you open the Microsoft ODBC Administrator in Windows 7, it has to run with elevated privileges and loads the Administrator profile. Our tnsnames.ora and sqlnet.ora files are on a network share that we map to a drive letter for all users across our organization. The Administrator profile does not have this drive mapping. So I created the TNS_ADMIN environment variable with the full UNC path and I was able to test DSNs successfully.
Regards,
Matt

Oracle 11g client for Windows 8 - 64bit exists impromptu without error msg

HI all.
I just got a new laptop and its running Windows 8 Pro 64 bit os. I downloaded Oracle Client 11g 64bit from the oracle website. After clicking the setup.exe installer a msg box pops up saying '[INS -13003] Environment does not meet the requirement' with no further information. Yet i go ahead and continue becos i was told it was a general error and should be ignored.
After that, the GUI comes up. I select Administrator (or any) installation type, the language, specify my installation location but on performing prerequisite check, it exists without error. Any help?

The 12c client install is documented at Contents
- it is a pretty straightforward process once you have downloaded the software. Did you try to install the full client or the Instant Client ?
11.2.0.1 install may or may not complete correctly - if it does, there is no guarantee that it will function as expected
HTH
Srini

ODBC and OCI not working with OBIEE 11g Client on 64 bit machine

Hi,
I have Installed OBIEE 11g client (Admin tool) on Windows XP Professional 64 bit machine.. I have Installed 11g database on the same machine but while importing Metadata using admin tool. getting "Connection has failed" error message... Can someone tell me whats the issue..
ODBC and OCI works fine with OBIEE 10g Admin..

Hi,
Oracle_BI1\network\admin folder gets installed with full obiee 11g Installlation and I have installed only 11g client as I have OBIEE 10g already Installed on my machine..
Installation is as follows:
ORACLE 11g CLIENT Installation is as follows:
C:\Program Files\Oracle Business Intelligence Enterprise Edition Plus Client
ORACLE 10g Installation is as follows:
C Drive:
ORACLE BI
ORACLE BI Data ( everything is working with this)
latest Log Info is as follows:
[2012-02-02T11:05:00.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: ] [tid: 24fc] [nQSError: 16001] ODBC error state: 08004 code: 12154 message: [Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified.
[2012-02-02T11:05:16.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: ] [tid: 2f3c] [nQSError: 16001] ODBC error state: 08004 code: 12154 message: [Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified.
[2012-02-02T11:32:53.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: ] [tid: 2f3c] [nQSError: 16001] ODBC error state: 08004 code: 12154 message: [Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified.

Configuration error when open admin tool in BIEE 11g client

Hi All,
I have installed BIEE 11g client in my laptop,the version is 11.1.6.2 ,it has show one error in the installation log :
<action name="Custom Action" target="oracle.bi.CustomIAActionGetInstanceNumber" status="error">
- <AdditionalNotes>
<error>class oracle.bi.CustomIAActionGetInstanceNumber.install() runtime exception:</error>
</AdditionalNotes>
After installation,when I try to open the admin tool in start menu,it show configuration error , but I can open the admin tool through installation directory.
And when I try to import metadata,it also shows connection has failed.
Can any body give some helps on this,thanks a lot.
Ryan.
Edited by: 997662 on Apr 5, 2013 1:39 AM

Hi,
Let me know which version you are using (OBIEE) ?
you are trying to install Client (Admin Tool) and OBIEE server in same machine ?
Thx,

Error RCU-6083 during RCU installation prior to OBIEE 11g on Solaris

Hello,
I have an application server where I have an Oracle Database EE 11g running on Solaris 10 upgrade 9.
The server has the following characteristics:
- SUN V440
- RAM 16GB
- 2 processors Ultra Sparc III, 1.5GHz
- OS: Solaris version 10
- Disk space: 500GB
- Oracle Weblogic Server 11g (10.3)
- Ethernet 1 Gpbs
I want to install the RCU schemas and OBIEE 11g (11.1.1.5.0) on this server so I verified all the pre-requisites for RCU and OBIEE and are OK.
I am using the Repository Creation Utility (11.1.1.5.0) for Microsoft Windows (32-bit) to install the RCU because although the database is running on Solaris, the installer is not working through that server so I have a PC connected to the network and through that PC that has windows7 i could run the installer and connect to the db, using the SYSTEM user (because when i select sys as sysdba, although the password is correct, it doesn't connect to the db).
However, the installer is sending the ERROR: RCU-6083 regarding the pre-requisites for the BIPLATFORM.
I already use the following command alter system set processes=500 and restarted the db services, however the wizard installer is still sendig that error.
What can be done to succesfully install the RCU?
Thanks and regards,
Rebeca

Hello User,
Below my comments in blue:-
1) Do I need to install any Oracle DB (like to install 10g) prior to running rcu.bat file?
Yes
2) If I install Oracle 10g DB, does if create any compatibility issue while installing OBIEE 11g?
Check below the compatibility matrix
Oracle Fusion Middleware Supported System Configurations
Thanks,
Sasi Nagireddy.

Oracle 11g Client Installation on Ubuntu

Hi, I tried to install the Oracle 11g Client on my Dell Inspiron laptop running ubuntu, the thing is that I did every step described in the Installation Guide but when I ran the ./runInstaller file, at the installation point the assistant raises an error and prompts for an action (Ignore, Retry, Cancel), and even if I choose ignore it keeps raising the same error, then I noticed in my terminal that the errors was because ubuntu couldn't find some commands used in the installation script, and that there was no installation steps for ubuntu in my guide, so I think the Client Installer I downloaded wasn't for ubuntu... could be the reason why I can't install the client? is there a script or some way to install the client on ubuntu?
Thanks!
Edited by: user10232758 on Oct 23, 2008 7:34 AM

Unfortunately there's no (official) installation guide from Oracle,because it's not supported. If you want to continue go to the Linux Technology Center on OTN and follow the instructions for unsupported platforms (under Installation Guides):
http://www.oracle.com/technology/tech/linux/index.html
http://www.pythian.com/blogs/968/installing-oracle-11g-on-ubuntu-804-lts-hardy-heron
Werner

How to remove Oracle 11g client from Windows 7 64-bit workstation.

When the Oracle 11g client was installed on a Windows 7 64-bit workstation, it was mistakenly installed as "Administrator".
We do not wish to do this; instead we want to install this client as a user with Administrator privileges.
PLEASE NOTE THE DIFFERENCE BEFORE REPLYING TO THIS THREAD!!!!!!!!
When I try to install the client, I get a message sending me to this directory:
F:\app\Administrator
I do not know why this message is produced; the directory it refers to DOES NOT EXIST.
My suspicion is that there extraneous entries in the registry which have not been removed; the obvious ones such as HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE have been deleted.
What I believe I need is a COMPLETE list of entries placed in the registry upon installation of the Oracle client.
The obvious problem is that the Uninstall feature of Oracle client does NOT FULLY remove all of the above entries.
As a side note, the Oracle client software installation needs to be revamped to detect situations such as this and provide a course of corrective actions.

I've not done it yet with 11g, but prior editions, there are 3 things that have to be done to eradicate an oracle client installation from Windows, after running uninstaller
1) delete the registry key HKLM\software\oracle
2) delete the ORACLE_HOME directory from the file system
3) delete c:\Program Files\oracle

11g Client installation errror - Unable to construct admin data&Invalid UTF

I am trying to install Oracle 11g Client on Windows 7 (version is Oracle Database 11g Release 2 Client (11.2.0.1.0) for Microsoft Windows (32-bit)). I already have installed Oracle 10g Client and it is working without problem. I read few articles that say it can be used simultaneously on single machine.
I get following error:
"ERROR!! Unable to construct admin data segment. java.io.UTFDataFormatException:Invalid UTF8 encoding."
I have full admin rights on machine, Windows is updated and latest Java is installed. Searched all over the net but can't find what could be the problem.
Thank you in advance.

This may be helpfull:
http://download.oracle.com/javase/1.4.2/docs/api/java/lang/class-use/Exception.html
its look like you have a problem with java
Edited by: Fran on 12-jul-2011 5:02

OBIEE 11.1.1.5 installation Error on windows 7 64 bit

Hi, I am unable to install OBIEE 11.1.1.5 in my windows 7 home premimum 64 bit laptop.
I got the following error while installation(simple installation) at 'CONFIGURE COMPONENTS' stage, can somebody help me please...
INST-08010: Error in validing the port range for auto port allocation. At Least 2 ports should be free within the range 7500-7500 for the Adminserver and Adminserver SSL
Ensure that a minimum of 2 pors are free within the range 7000-7500 for auto port allocation to work correctly for the Adminserver and
INST - 08010: Error in validating the port range for auto port allocation. At least 3 ports should be free within the range 9500-9699 for the Weblogic Components for BI(WLS Managed Server, Managed Server SSL and NodeManager)
Ensure that a minimum of 3 ports are free within the range 9500-9699 for auto port allocation to work correctly for the Weblogic Components for BI(WLS Managed Server, Managed Server SSL and Nodemanager

Hi,
It's Port no issues. if u r going with autoportconfiguration it will refer 7001 to 7005 port. that port no are unavailable u r laptop.
solution 1:
go with manual prt configuration method and use available port(enterprise/software only install ).
solution 2: disable Mecafi antivirus --> this may use 7001 to 7005 port no. then try it again.
Note: obiee11g ok with win 7 ultimat/professional edition. it's having lot of issues with win 7 basic/home perimum edition so make sure u r version. i.e: first of all officially oracle not supporting win 7 os
FYI: certification matrix
http://obieeelegant.blogspot.com/2011/10/windows-7-home-premium-edition-is-not.html
Thanks
Deva

Error in installation of 64 bit 11g client on solaris sparc64 bit

Similar Messages

Maybe you are looking for