Error in Internet Explorer when loading from cache

Hello all,
I have this error in internet explorer when it's loading the swf from cache
"ArgumentError: Error #2015: Invalid BitmapData.
at flash.display::BitmapData()"
If you have a solution for me I will appreciate.
Thanks

I've just run into this error as well. It only occurs when you have loaded your SWF into cache and you refresh the page. This error does not occur if the user opens a new tab and visits the site (even if the cache has that SWF). Right now, I am stumped on how to resolve this issue without the help of Adobe. There is a critical site launch that depends on BitmapData to work properly.
Adobe, I will also be posting this in your bug system.

Similar Messages

HT204406 Getting "Unknown Error" Check internet connection when downloading from itunes match

I recently uploaded all of my songs from my PC to the itunes match cloud. I was able to sucessfully download a few songs last night. Now when I try to download the songs I get an "unknown" error and to check my internet connection. I have confirmed that my internet connection is working because I am able to access outside websites. I'm not sure where to go from here. any help is greatly appreciated!
Thank you,

There are many versions of this song in the UK Store. If you contact Apple from the iTunes section of the website (make sure you have the purchase details to hand), they should credit you so you can purchase another version of the song.
When you contact them, mention the problem file so they know to pull it.

Error /SAPAPO/TSM 041 when loading from InfoCube to SNP planning area

I am using APO V5.1.
I have a 'backup' InfoCube with characteristics 9ARNAME and 9AVERSION which I'm loading to an SNP planning area via trans /SAPAPO/TSCUBE. The InfoCube is itself populated from the 9ARE aggregate of the SNP planning area.
But I get error /SAPAPO/TSM 041when I run the load, suggesting absence of a required characteristic or navigation attribute in the Cube. Do I need 9ALOCNO for instance?
Can anyone advise me here?...

Hi,
I am not very sure about the 9ARE aggregate (haven't used it in backups), but RTSCUBE is used to copy time Series (TS) KF data from cube to planning area (SNP or DP).
Are you trying to restore some time series data from your backup cube to the planning area? If yes, then do a mapping of characteristic from cube to planning area in RTSCUBE, and also map the TS KF between cube and planning area.
If your KF is not a time series KF, then you can't copy it from cube to planning area. You could get data to cube for some reporting, otherwise I am not sure what use the backup is for you. For SNP, most of the data would be received from R/3, so there's not much point in having a backup.
Hope this helps.
Thanks - Pawan

Does Resetting Internet Explorer Maintenance settings from GPO will also remove the proxy set in IE by a third party tool when the GPO refreshes for the first time

Hi,
We have two GPO's with IE maintenance (Preference Mode Configured)
The settings it has are
1. Automatically detect configuration settings - Set to Enabled.
2. Automatic Browser configuration - Not configured.
We do not have proxy value set in IE through this GPO.
We have proxy set in IE through a third party tool (TPT) which updates the proxy at logon event 5 and 10.
Does Resetting Internet Explorer Maintenance settings from these GPO's also clear proxy set in IE by third party tool after the first GPO refresh.
I am sure the second time when the GP refreshes, the client won't find any IEM settings and hence there is no question of the proxy set in IE by TPT to erase. It is only the first time of the GPO refresh that I am concerned about.
Can someone please guide as I am planning to do the same in our production and concerned about the downtime caused due to the proxy being removed if at all for the first time.

It will disable the proxy server option in Internet Options (untick the box), but will still store your proxy details.
Thanks
Ryan

After downloading Firefox, it goes to a site called Sweet IM Search. I have to go to AT&T's home page. Why isn't it going directly to AT&T? Also, when I add to Bookmarks, it doesn't take it. It pulls up bookmarks from Internet Explorer when I had it.

# * Numbered list item
Also, I've added bookmarks. I add a site to my bookmarks, it takes it, but later it's not there. It shows it under Internet Explorer when I had it.
Judy

See:
* https://support.mozilla.org/en-US/questions/845983

Spry Validation Error in Internet Explorer

Hi,
I have a PHP form with Spry Validation for Textfields and Selction.
The init part in the HTML form looks like this:
      var spryradioanrede = new Spry.Widget.ValidationRadio("spryradioanrede", {isRequired:true, validateOn:["change,blur"]});
       var sprytextfieldvorname = new Spry.Widget.ValidationTextField("sprytextfieldvorname", "none", {isRequired:true, validateOn:["change,blur"]});
       var sprytextfieldnachname = new Spry.Widget.ValidationTextField("sprytextfieldnachname", "none", {isRequired:true, validateOn:["change,blur"]});
       var sprytextfieldstrasse = new Spry.Widget.ValidationTextField("sprytextfieldstrasse", "none", {isRequired:true, validateOn:["change,blur"]});
       var sprytextfieldhausnummer = new Spry.Widget.ValidationTextField("sprytextfieldhausnummer", "none", { validateOn:["change,blur"]});
       var sprytextfieldplz = new Spry.Widget.ValidationTextField("sprytextfieldplz", "none", {useCharacterMasking:true, pattern:"00000", validateOn:["change,blur"]});
       var sprytextfieldort = new Spry.Widget.ValidationTextField("sprytextfieldort", "none", {isRequired:true, validateOn:["change,blur"]});
       var sprytextfieldemail = new Spry.Widget.ValidationTextField("sprytextfieldemail", "email", { validateOn:["change,blur"]});
       var sprytextfieldvorwahl = new Spry.Widget.ValidationTextField("sprytextfieldvorwahl", "none", {validation:isNumeric,isRequired:false, validateOn:["change,blur"]});
       var sprytextfieldrufnummer = new Spry.Widget.ValidationTextField("sprytextfieldrufnummer", "none", {validation:isNumeric, isRequired:false, validateOn:["change,blur"]});
       var sprytextfieldausweisnummer = new Spry.Widget.ValidationTextField("sprytextfieldausweisnummer", "none", {validation:isValididentitycard, validateOn:["blur"]});
       var sprytextfieldstaatsangehoerigkeit = new Spry.Widget.ValidationTextField("sprytextfieldstaatsangehoerigkeit", "none", {isRequired:true, validateOn:["change,blur"]});
       var spryselectfieldtag = new Spry.Widget.ValidationSelect("spryselectfieldtag", {isRequired:true, validateOn:["change,blur"]});
       var spryselectfieldmonat = new Spry.Widget.ValidationSelect("spryselectfieldmonat", {isRequired:true, validateOn:["change,blur"]});
       var spryselectfieldjahr = new Spry.Widget.ValidationSelect("spryselectfieldjahr", {isRequired:true, validateOn:["change,blur"]});
When loading the page an error in Internet Explorer 8 occures:
Error Details from IE:
Benutzer-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; MDDR; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
Zeitstempel: Mon, 31 Aug 2009 08:54:38 UTC
Meldung: 'this.input.defaultValue' ist Null oder kein Objekt
Zeile: 1734
Zeichen: 2
Code: 0
URI: http://.../SpryAssets/SpryValidationTextField.js
When loading the page the first time it's not a big problem. But when the users enters some unvalid data the page lodes again and in the onload section from the body the function validateall is startet.
function validateall()    {
                status = 0;
                status += spryradioanrede.validate();
                status += sprytextfieldvorname.validate();
                status += sprytextfieldnachname.validate();
                status += sprytextfieldstrasse.validate();
                status += sprytextfieldstrasse.validate();
                status += sprytextfieldplz.validate();
                status += sprytextfieldort.validate();
                status += sprytextfieldemail.validate()
                status += sprytextfieldvorwahl.validate();
                status += sprytextfieldrufnummer.validate();
                status += sprytextfieldausweisnummer.validate();
                status += sprytextfieldstaatsangehoerigkeit.validate();
                status += spryselectfieldtag.validate();
                status += spryselectfieldmonat.validate();
                status += spryselectfieldjahr.validate();
                if (status < 15) {
                    return 0;
                } else {
                    return 1;
The error occurs again and the validation is not yet done. Which means, that the fields with problems will not be marked. When entering the field afterward and changing or blur everything works ok and the field is marked in red. Only the onload is not working.
Any ideas, what the problem is?
Thank
Michael

It seems to be an Error in Spry,
Open the SpryValidationTextField.js
find:
Spry.Widget.ValidationTextField.prototype.reset = function() {
     this.removeHint();
     this.oldValue = this.input.defaultValue;
     this.resetClasses();
     if (Spry.is.ie) {
          //this will fire the onpropertychange event right after the className changed on the container element
          //IE6 will not fire the first onpropertychange on an input type text after a onreset handler if inside that handler the className of one of the elements inside the form has been changed
          //to reproduce: change the className of one of the elements inside the form from within the onreset handler; then the onpropertychange does not fire the first time
          this.input.forceFireFirstOnPropertyChange = true;
          this.input.removeAttribute("forceFireFirstOnPropertyChange");
     var self = this;
     setTimeout(function() {self.putHint();}, 10);
and replace with:
Spry.Widget.ValidationTextField.prototype.reset = function() {
     this.removeHint();
     this.oldValue = this.input && this.input.defaultValue ? this.input.defaultValue : "";
     this.resetClasses();
     if (Spry.is.ie) {
          //this will fire the onpropertychange event right after the className changed on the container element
          //IE6 will not fire the first onpropertychange on an input type text after a onreset handler if inside that handler the className of one of the elements inside the form has been changed
          //to reproduce: change the className of one of the elements inside the form from within the onreset handler; then the onpropertychange does not fire the first time
          this.input.forceFireFirstOnPropertyChange = true;
          this.input.removeAttribute("forceFireFirstOnPropertyChange");
     var self = this;
     setTimeout(function() {self.putHint();}, 10);
To see if it helps

Error in Internet Explorer with Muse

I have an error in Internet Explorer and cannot seem to find the resolve in your Q&A databases. It is: museJSAssert: Error calling selector function:Error: Invalid argument; I have gone thru this website for answers (looked at the code thru a code editor and any broken links as per mentioned in posted discussions)... This site is live right now, it works in Safari, Chrome and Firefox. NEED HELP ASAP PLEASE!
I have periods instead of dashes in the phone numbers... could this be it? OR some of the page links are not active yet... I am guessing at this point as I am relatively new to web/muse design. Any help would be fantastic! Thank you very much! Oh, the website address is www.rubarb.ca (yes, that is spelled correctly)... THANKS AGAIN!

I've just run into this error as well. It only occurs when you have loaded your SWF into cache and you refresh the page. This error does not occur if the user opens a new tab and visits the site (even if the cache has that SWF). Right now, I am stumped on how to resolve this issue without the help of Adobe. There is a critical site launch that depends on BitmapData to work properly.
Adobe, I will also be posting this in your bug system.

Firefox wont load background image on some sites but internet explore will load the background

i downloaded firefox awhile ago worked perfectly fine then all a sudden it wont load facebook background images the homepage of facebook loads background image but when i log in it wont load background image but when i try internet explorer it loads the background images fine i checked every setting redownloaded everyhing nothing fix's it tho

If images are missing then check that you aren't blocking images from some domains (e,g, sphotos.ak.fbcdn.net).
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
Make sure that you do not block third-party images, the permissions.default.images pref should be 1.
*http://kb.mozillazine.org/Images_or_animations_do_not_load
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong

Chinese characters scrambled when loading from DS to BW

Hi, I've been pulling my hair out with this issue.
I have a flat file containing Chinese text. When I load this in BW using 'FLATFILE' as a source system, it works fine. BW shows the correct Chinese characters.
When I do the same load using BODI, I get funny characters.
When I use BODI to load from one flat file into another flat file, the Chinese characters remain correct.
What do I need to do to make sure I get the right Chinese characters in BW when loading from BODI?
BODI is installed on Unix on Oracle 10.
I run the jobs as batch processes.
The dsconfig.txt has got:
AL_Engine=<default>_<default>.<default>
There are no locale settings in al_env.sh
BW target is UTF-8 codepage.
File codepage is BIG5-HKSCS
BODI is set up as a Unicode system in SAP BW.
When loading flat file to flat file, I get a message:
DATAFLOW: The specified locale <eng_gb.iso-8859-1> has been coerced to <Unicode (UTF-16)
because the datastore <TWIN_FF_CUSTOMER_LOCAL> obtains data in <BIG5-HKSCS> codepage.
JOB: Initializing transcoder for datastore <TWIN_FF_CUSTOMER_LOCAL> to transcode between
engine codepage<Unicode (UTF-16)> and datastore codepage <BIG5-HKSCS>
When loading to BW the messages are almost the same, but now the last step in UTF-16 to UTF-8.
I read the wiki post which definitely helped me to understand the rationale behind code page, but now I ran out of ideas what else to check ( http://wiki.sdn.sap.com/wiki/display/BOBJ/Multiple+Codepages )
Any help would be greatly appreciated.
Jan.

Hi all. Thanks for the Inputs. This is what I got when I clicked on the Details Tab of the Monitor....
Error when transferring data; communication error when analyzing
Diagnosis
Data packages or InfoPackages are missing in BI but there were no apparent processing errors in the source system. It is therefore probable that there was an error in the data transfer.
The analysis tried to read the ALE outbox of the source system. This lead to error .
It is possible that there is no connection to the source system.
Procedure
Check the TRFC overview in the source system.
Check the connection to the source system for errors and check the authorizations and profiles of the remote user in both the BI and source systems.
Check th ALE outbox of the source system for IDocs that have not been updated.

Error while activating DSO after loading from another DSO..Production issue

Hello Gurus,
I got an error while activating DSO2 after loading from another DSO1.
DSO1 load and activation was sucessful but while loading from DSO1 to DSO2 load was fine but got error while activating...
>Error when assigning SID: Action VAL_SID_CONVERT table ZWEEK_NUM
>Value u201809u2019 of characteristic ZWEEK_NUM is not a number with 000004 spaces
this theard was posted after searching for related post in SDN.
and i tried Function Module RSODS_CHECK_RSODSACTUPDTYPE but it is not available .. but I used this in BW 3.10u2026..
is their any similar Function Module in BI 7.0 please advice.
We are using SAP NetWeaver BI 7.0
Release- 700 Service level- 017
Thanks in advance
Sandy

sloved the issue......
it was due to wrong data for the related field...
it must be "0009 "
Thanks for ur support. closing the ticket
Regards
Sandy

Component Slider not working when loaded from another swf file

I have a simple Flash application that uses a component Slider to increase or decrease the size of the text in a TextArea (ta). It works perfectly fine on its own, however, when I try to load the same swf file from another application, I get the following error...
ReferenceError: Error #1069: Property fl.managers:IFocusManager::form not found
on fl.managers.FocusManager and there is no default value.
at fl.controls::Slider/thumbPressHandler()
Code...
import fl.events.*;
import flash.text.TextFormat;
ta.text = "Lorem ipsum dolor sit amet";
var tf:TextFormat = new TextFormat();
tf.color = 0xCCCCCC;
tf.font = "Trebuchet MS";
tf.size = 12;
slider.addEventListener(SliderEvent.THUMB_DRAG, sliderChange);
style();
function style():void
    ta.setStyle("textFormat", tf);
function sliderChange(e:SliderEvent):void
    tf.size = slider.value;
    ta.setStyle("textFormat", tf);
Could the containing swf file that I'm loading the slider swf file in anyway effect the slider application? I don't quite understand why it works on its own, but not when loaded from another app.

add a slider component to the main (loading) swf's library.

Internet explorer not loading entire web pages

I am having an issue with internet explorer only loading certain parts of select web pages, like espn fantasy football etc. Sometimes the information shows up but does not seem to be formated correctly, the information is low on the page and cannot read certain things. Can anyone help

In addition to what Ron JACKLE & Elizabeth already stated, because IE is no longer supported, you should be using the latest version of IE:
Internet Explorer 5.1.7 for Mac OS 8.1 to 9.x
Give it loads of memory. 300% is strongly recommended as it is memory starved.
Because IE is no longer supported & if you wish to continue using it, you will need to babysit it and give it TLC & do a voodoo dance every week to keep it running smoothly. This is the main reason why I got rid of it. I don't have time for this BS.
Once a week in IE Edit>Preferences, delet History, Empty Cache (if you have cable set Cache to 0).
Once a week Go into the system folder>preferences folder & trash the following preferences:
finder
ASLM
PPC Registration Database
Cache.waf-found inside the MS Internet Cache folder
MRJ Cache folder-a new one will be recreated.(If not found go to System folder>Application Support>MRJ Cache folder-trash all you find inside-(DO NOT TRASH THIS FOLDER)
Download Cache-found inside Explorer Folder
Downloads.html-found inside Explorer Folder
History.html-found inside Explorer Folder
Rebuild your desktop w/extensions off. Use Techtool Lite or Trash*Desktop - may delete Finder comments to rebuild your desktop w/extensions off. Does a better job than manually & you avoid all the finger gymnatics. You just have to hold down the shift key to shut off extensions.
Restart to turn the extensions back on again & empty the trash.
If you want to rebuild manually, see KB article http://docs.info.apple.com/article.html?artnum=10182 Rebuilding Desktop File and Icon Recovery.
If the above does not work, then dump the %#&*X@ & check out other Mac browsers
Bill Gates has dropped all support for the Mac version of Internet Explorer.
Good Luck

Java API that extracts data form Internet Explorer (when user highlights)

Hi all,
Need advice on "How to extract data from Internet explorer when user highlights a word (or paragraph)"?
Sample code will be greatly appreciated.
Thanks in advance
regards
DIlip

Hi tolmank ,
Really appreciated your prompt reply.
Thanks again
Regards
Dilip

TS4022 Why does my icloud open in internet explorer when it is not my main browser?

Why does icloud open in internet explorer when I use Google as my main browser? I did something to make it happen and can't find how to change it back.

Hey man I was having the same problem and I found the answer.... Im going to put the steps you have to follow.
1.Open www.icloud.com on your Internet Explorer and if you're signed in you have to sign out.
2. Open www.icould.com on your Google Chrome and then sign in and click on the box that says "stay signed in" or something like that.
3. Try to open icloud the normal way you do it and it has to open on Chrome.
This worked for me, hopefully it works for you man, let me know.

Random Bingads WSDL errors: Parsing WSDL: Couldn't load from...failed to load external entity, Could not connect to host, Parsing Schema: can't import schema from

Hi,
I am developing a web tool that accesses client's Bingads accounts via OAUTH2 granting. I am downloading data from clients daily.
Generally it worked, but for 2 days I am experiencing a weird issue, that in random times (but more and more often though) I receive random error messages from Bing server. I am pasting below a few example from my logs (with timestamp and request/response).
Must note that I launch these requests from the server where we have the webapp but also I launch it locally. The same is the result.
The timestamp is in France time (GMT+1).
Thanks ahead!
Best regards,
Steve
2015-01-14 15:08:05: Service\BingAds::initService => SOAP-ERROR: Parsing Schema: can't import schema from 'https://reporting.api.bingads.microsoft.com/Api/Advertiser/Reporting/V9/ReportingService.svc?xsd=xsd0'
---------Soap Request:--------------------------------------------
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetDetailedBulkDownloadStatusRequest><ns1:RequestId>108277125</ns1:RequestId></ns1:GetDetailedBulkDownloadStatusRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
---------Response:------------------------------------------------
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"><s:Header><h:TrackingId xmlns:h="https://bingads.microsoft.com/CampaignManagement/v9">XXXXX</h:TrackingId></s:Header><s:Body><GetDetailedBulkDownloadStatusResponse
xmlns="https://bingads.microsoft.com/CampaignManagement/v9"><Errors i:nil="true" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"/><ForwardCompatibilityMap xmlns:a="http://schemas.datacontract.org/2004/07/System.Collections.Generic"
xmlns:i="http://www.w3.org/2001/XMLSchema-instance"/><PercentComplete>100</PercentComplete><RequestStatus>Completed</RequestStatus><ResultFileUrl>https://download.api.bingads.microsoft.com/ReportDownload/Download.aspx?q=XXX</ResultFileUrl></GetDetailedBulkDownloadStatusResponse></s:Body></s:Envelope>
2015-01-15 05:41:39: Service\BingAds::getCampaigns => SoapFault: Could not connect to host
---------Soap Request:--------------------------------------------
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
---------Response:------------------------------------------------
(empty response logged)
2015-01-15 05:45:00: Service\BingAds::initService => SOAP-ERROR: Parsing WSDL: Couldn't load from 'https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl' : failed to load external entity "https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl"
2015-01-15 11:58:46: Service\BingAds::getCampaigns =>
---------Soap Fault:--------------------------------------------
SoapFault catched:
Could not connect to host
---------Soap Request:--------------------------------------------
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
---------Response:------------------------------------------------
(empty response logged)
2015-01-15 11:59:50: Service\BingAds::initService =>
---------Soap Fault:--------------------------------------------
SoapFault catched:
SOAP-ERROR: Parsing WSDL: Couldn't load from 'https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl' : failed to load external entity "https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl"
---------Soap Request:--------------------------------------------
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXXXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
---------Response:------------------------------------------------
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"><s:Header><h:TrackingId xmlns:h="https://bingads.microsoft.com/CampaignManagement/v9">XXXXX</h:TrackingId></s:Header><s:Body><GetCampaignsByAccountIdResponse
xmlns="https://bingads.microsoft.com/CampaignManagement/v9"><Campaigns xmlns:i="http://www.w3.org/2001/XMLSchema-instance"></Campaign>........</Campaigns></GetCampaignsByAccountIdResponse></s:Body></s:Envelope>
2015-01-15 12:05:55: Service\BingAds::getCampaigns =>
---------Soap Fault:--------------------------------------------
SoapFault catched:
Could not connect to host
---------Soap Request:--------------------------------------------
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXXXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXXXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXXXXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXXXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
---------Response:------------------------------------------------
(empty response logged)

Hi,
1. I am using the older version of the PHP library provided by Bing (updated on 1/20/2014), so that is doing the WSDL loadings. I initialize the proxy calling OpticoBingAdsClientProxy providing what it needs, and then do the requests.
2. I have a cron that reads data from client's accounts. I make several calls, like get search query report, get keyword performance report, get keyword bulk data. As the script progressed the first 2 worked and the third gave error. Or in other cases the
first request failed. The calls have quite some time in between them since I process data (sometimes even 160 seconds)
3. I did not change the code ion terms of requests, since as I said I use the PHP library (same credentials, ...).
As of today (2015-01-16 10:30 GMT + 2) running my script, still have the same issues.
Thank you!
Steve

Error in Internet Explorer when loading from cache

Similar Messages

Maybe you are looking for