Error /SAPAPO/TSM 041 when loading from InfoCube to SNP planning area

I am using APO V5.1.
I have a 'backup' InfoCube with characteristics 9ARNAME and 9AVERSION which I'm loading to an SNP planning area via trans /SAPAPO/TSCUBE. The InfoCube is itself populated from the 9ARE aggregate of the SNP planning area.
But I get error /SAPAPO/TSM 041when I run the load, suggesting absence of a required characteristic or navigation attribute in the Cube. Do I need 9ALOCNO for instance?
Can anyone advise me here?...

Hi,
I am not very sure about the 9ARE aggregate (haven't used it in backups), but RTSCUBE is used to copy time Series (TS) KF data from cube to planning area (SNP or DP).
Are you trying to restore some time series data from your backup cube to the planning area? If yes, then do a mapping of characteristic from cube to planning area in RTSCUBE, and also map the TS KF between cube and planning area.
If your KF is not a time series KF, then you can't copy it from cube to planning area. You could get data to cube for some reporting, otherwise I am not sure what use the backup is for you. For SNP, most of the data would be received from R/3, so there's not much point in having a backup.
Hope this helps.
Thanks - Pawan

Similar Messages

  • Error in Internet Explorer when loading from cache

    Hello all,
    I have this error in internet explorer when it's loading the swf from cache
    "ArgumentError: Error #2015: Invalid BitmapData.
        at flash.display::BitmapData()"
    If you have a solution for me I will appreciate.
    Thanks

    I've just run into this error as well. It only occurs when you have loaded your SWF into cache and you refresh the page. This error does not occur if the user opens a new tab and visits the site (even if the cache has that SWF). Right now, I am stumped on how to resolve this issue without the help of Adobe. There is a critical site launch that depends on BitmapData to work properly.
    Adobe, I will also be posting this in your bug system.

  • Load data from infocube to DP planning area

    Hi All,
    I have loaded the data from info cube to DP planning area keyfigures with the transaction /SAPAPO/TSCUBE.
    the data copy was successful and there were no error messages. However, the keyfigure values in planning book are shown exactly as double the values of infocube key figures for all the periods.
    I repeatedly loaded data several times and the behaviour was same.
    We didn't implement any BADI in standrad /SAPAPO/TSCUBE program.
    Could any one please give some hints what would be the reasons for this problem.
    Thanks
    Krish

    I am not sure on how you check the Live Cache data for DP but based on your testing I can say that the old data is not overwritten by the new data in the Live cache. I cannot say the root cause for this however I can suggest you the remedy. To avoid this issue, you zero out the values of the key figure before loading from the Cube.
    For this you have to run a macro which copies zero for the entire horizon and then load the cube. First test this in test system, if it works (it should work), then to make it simple create a batch job with two steps, first step would run this macro and the second step will load the data from cube. you can run this job whenever you want to load the data

  • Chinese characters scrambled when loading from DS to BW

    Hi, I've been pulling my hair out with this issue.
    I have a flat file containing Chinese text. When I load this in BW using 'FLATFILE' as a source system, it works fine. BW shows the correct Chinese characters.
    When I do the same load using BODI, I get funny characters.
    When I use BODI to load from one flat file into another flat file, the Chinese characters remain correct.
    What do I need to do to make sure I get the right Chinese characters in BW when loading from BODI?
    BODI is installed on Unix on Oracle 10.
    I run the jobs as batch processes.
    The dsconfig.txt has got:
    AL_Engine=<default>_<default>.<default>
    There are no locale settings in al_env.sh
    BW target is UTF-8 codepage.
    File codepage is BIG5-HKSCS
    BODI is set up as a Unicode system in SAP BW.
    When loading flat file to flat file, I get a message:
    DATAFLOW: The specified locale <eng_gb.iso-8859-1> has been coerced to <Unicode (UTF-16)
    because the datastore <TWIN_FF_CUSTOMER_LOCAL> obtains data in <BIG5-HKSCS> codepage.
    JOB: Initializing transcoder for datastore <TWIN_FF_CUSTOMER_LOCAL> to transcode between
    engine codepage<Unicode (UTF-16)>  and datastore codepage <BIG5-HKSCS>
    When loading to BW the messages are almost the same, but now the last step in UTF-16 to UTF-8.
    I read the wiki post which definitely helped me to understand the rationale behind code page, but now I ran out of ideas what else to check ( http://wiki.sdn.sap.com/wiki/display/BOBJ/Multiple+Codepages )
    Any help would be greatly appreciated.
    Jan.

    Hi all. Thanks for the Inputs. This is what I got when I clicked on the Details Tab of the Monitor....
    Error when transferring data; communication error when analyzing
    Diagnosis
    Data packages or InfoPackages are missing in BI but there were no apparent processing errors in the source system. It is therefore probable that there was an error in the data transfer.
    The analysis tried to read the ALE outbox of the source system. This lead to error .
    It is possible that there is no connection to the source system.
    Procedure
    Check the TRFC overview in the source system.
    Check the connection to the source system for errors and check the authorizations and profiles of the remote user in both the BI and source systems.
    Check th ALE outbox of the source system for IDocs that have not been updated.

  • Error while activating DSO after loading from another DSO..Production issue

    Hello Gurus,
    I got an error while activating DSO2 after loading from another DSO1.
    DSO1 load and activation was sucessful but while loading from DSO1 to DSO2 load was fine but got error while activating...
      >Error when assigning SID: Action VAL_SID_CONVERT table ZWEEK_NUM
      >Value u201809u2019 of characteristic ZWEEK_NUM is not a number with 000004 spaces
    this theard was posted after searching for related post in SDN.
    and i tried Function Module RSODS_CHECK_RSODSACTUPDTYPE but it is not available .. but I used this in BW 3.10u2026..
    is their any similar Function Module in BI 7.0 please advice.
    We are using SAP NetWeaver BI 7.0
    Release- 700    Service level- 017
    Thanks in advance
    Sandy

    sloved the issue......
    it was due to wrong data for the related field...
    it  must be "0009 "
    Thanks for ur support. closing the ticket
    Regards
    Sandy

  • How is data loaded from Infocube to Planning area - need technical info

    I would like to find out how data is loaded from cube to planning area ,
    I know that CUBE has tables, but how does that get loaded to planning area , where is the mapping from which I can compare
    data in CUBE and the same data that reaches planning area.
    Say for example I have below values in the infocube
    Prod1 --> Loc1 -
    > available provisioning qty
    AAA        AB90             100
    Then where do i check in the planning area tables ( are there any tables mapped) after running the TSINPUT program, i know it can be checked in the planning book , but i want to check in planning area tables if they exi

    Hi ,
    The data is loaded from infocube to planning area using update rules. The issue you have mentioned seems to be two requests are having data for the same CVCs in the cube.
    Example: For the same CVC, two requests avilable in the infocube. When you copy the data using TSCUBE transaction, whatever data avilable in the cube for the CVC gets copied into Planning Area.
    CVC1 - cube - Old Request - 100
    CVC1 - cube - Actual Request - 200
    CVC1 - Planning Area = 300 ( The value is supposed to be 200, but since the old request also contains data in the cube for the cvc, it gets copied as 300)
    Issue : There might two request contains data for the same code
    Solution : 1. Check the data in the cube using transaction LISTCUBE  2.  Delete old request and check the data agian. 3. If it matches with your requirement, run the TSCUBE again.
    Please let me know if you need additional information.
    Thanks,
    Jeysraj

  • Component Slider not working when loaded from another swf file

    I have a simple Flash application that uses a component Slider to increase or decrease the size of the text in a TextArea (ta). It works perfectly fine on its own, however, when I try to load the same swf file from another application, I get the following error...
    ReferenceError: Error #1069: Property fl.managers:IFocusManager::form not found
    on fl.managers.FocusManager and there is no default value.
    at fl.controls::Slider/thumbPressHandler()
    Code...
    import fl.events.*;
    import flash.text.TextFormat;
    ta.text = "Lorem ipsum dolor sit amet";
    var tf:TextFormat = new TextFormat();
    tf.color = 0xCCCCCC;
    tf.font = "Trebuchet MS";
    tf.size = 12;
    slider.addEventListener(SliderEvent.THUMB_DRAG, sliderChange);
    style();
    function style():void
        ta.setStyle("textFormat", tf);
    function sliderChange(e:SliderEvent):void
        tf.size = slider.value;
        ta.setStyle("textFormat", tf);
    Could the containing swf file that I'm loading the slider swf file in anyway effect the slider application? I don't quite understand why it works on its own, but not when loaded from another app.

    add a slider component to the main (loading) swf's library.

  • Load from Infocube to an ODS.

    Hi All,
    I needed some information on the logic when you are loading from an Infocube to the ODS.
    I have 2 requests with 100,000 records each in an Infocube.All the keys(dimensions-chars) in the infocube match. The keyfigures in both the requests are different.When i execute  Full load to load the ODS i see only 100,000 records loaded into
    the ODS and the keyfigures have been aggregated.
    Verified the update rules for the keyfigure and the "Update Type" is Overwrite.
    Please help me understand if this is the way its supposed to be workign when loading from an infocube to an ODS.
    thanks in advance

    Hi sandesh,
    As your saying this is how it works"records are aggregated when data is extracted from cube even before DSO update rules comes into act".
    So in this case,i will never be able to overwrite the kefy figures even though i have the update type as "Overwrite".
    Ex- I have 2 reqs in the cube
                 Mat        Plant       KF1   
    Req1     1000        07           10
    Req2     1000        07             5
    Loaded this into the ODS .
    Then i have another request in the cube
    Req3      1000      07        1
    Layter when i load this Req3 into the ODS,how would it show up in.If its aggregated int he cube before its loaded intot he cube,then it will never use the overwrite functionality i ahve selected for the update rules.
    Please help me understand.

  • Random Bingads WSDL errors: Parsing WSDL: Couldn't load from...failed to load external entity, Could not connect to host, Parsing Schema: can't import schema from

    Hi,
    I am developing a web tool that accesses client's Bingads accounts via OAUTH2 granting. I am downloading data from clients daily.
    Generally it worked, but for 2 days I am experiencing a weird issue, that in random times (but more and more often though) I receive random error messages from Bing server. I am pasting below a few example from my logs (with timestamp and request/response).
    Must note that I launch these requests from the server where we have the webapp but also I launch it locally. The same is the result.
    The timestamp is in France time (GMT+1).
    Thanks ahead!
    Best regards,
    Steve
    2015-01-14 15:08:05: Service\BingAds::initService => SOAP-ERROR: Parsing Schema: can't import schema from 'https://reporting.api.bingads.microsoft.com/Api/Advertiser/Reporting/V9/ReportingService.svc?xsd=xsd0'
    ---------Soap Request:--------------------------------------------
    <?xml version="1.0" encoding="UTF-8"?>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetDetailedBulkDownloadStatusRequest><ns1:RequestId>108277125</ns1:RequestId></ns1:GetDetailedBulkDownloadStatusRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
    ---------Response:------------------------------------------------
    <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"><s:Header><h:TrackingId xmlns:h="https://bingads.microsoft.com/CampaignManagement/v9">XXXXX</h:TrackingId></s:Header><s:Body><GetDetailedBulkDownloadStatusResponse
    xmlns="https://bingads.microsoft.com/CampaignManagement/v9"><Errors i:nil="true" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"/><ForwardCompatibilityMap xmlns:a="http://schemas.datacontract.org/2004/07/System.Collections.Generic"
    xmlns:i="http://www.w3.org/2001/XMLSchema-instance"/><PercentComplete>100</PercentComplete><RequestStatus>Completed</RequestStatus><ResultFileUrl>https://download.api.bingads.microsoft.com/ReportDownload/Download.aspx?q=XXX</ResultFileUrl></GetDetailedBulkDownloadStatusResponse></s:Body></s:Envelope>
    2015-01-15 05:41:39: Service\BingAds::getCampaigns => SoapFault: Could not connect to host
    ---------Soap Request:--------------------------------------------
    <?xml version="1.0" encoding="UTF-8"?>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
    ---------Response:------------------------------------------------
    (empty response logged)
    2015-01-15 05:45:00: Service\BingAds::initService => SOAP-ERROR: Parsing WSDL: Couldn't load from 'https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl' : failed to load external entity "https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl"
    2015-01-15 11:58:46: Service\BingAds::getCampaigns =>
    ---------Soap Fault:--------------------------------------------
    SoapFault catched:
    Could not connect to host
    ---------Soap Request:--------------------------------------------
    <?xml version="1.0" encoding="UTF-8"?>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
    ---------Response:------------------------------------------------
    (empty response logged)
    2015-01-15 11:59:50: Service\BingAds::initService =>
    ---------Soap Fault:--------------------------------------------
    SoapFault catched:
    SOAP-ERROR: Parsing WSDL: Couldn't load from 'https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl' : failed to load external entity "https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl"
    ---------Soap Request:--------------------------------------------
    <?xml version="1.0" encoding="UTF-8"?>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXXXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
    ---------Response:------------------------------------------------
    <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"><s:Header><h:TrackingId xmlns:h="https://bingads.microsoft.com/CampaignManagement/v9">XXXXX</h:TrackingId></s:Header><s:Body><GetCampaignsByAccountIdResponse
    xmlns="https://bingads.microsoft.com/CampaignManagement/v9"><Campaigns xmlns:i="http://www.w3.org/2001/XMLSchema-instance"></Campaign>........</Campaigns></GetCampaignsByAccountIdResponse></s:Body></s:Envelope>
    2015-01-15 12:05:55: Service\BingAds::getCampaigns =>
    ---------Soap Fault:--------------------------------------------
    SoapFault catched:
    Could not connect to host
    ---------Soap Request:--------------------------------------------
    <?xml version="1.0" encoding="UTF-8"?>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXXXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXXXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXXXXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXXXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
    ---------Response:------------------------------------------------
    (empty response logged)

    Hi,
    1. I am using the older version of the PHP library provided by Bing (updated on 1/20/2014), so that is doing the WSDL loadings. I initialize the proxy calling OpticoBingAdsClientProxy providing what it needs, and then do the requests.
    2. I have a cron that reads data from client's accounts. I make several calls, like get search query report, get keyword performance report, get keyword bulk data. As the script progressed the first 2 worked and the third gave error. Or in other cases the
    first request failed. The calls have quite some time in between them since I process data (sometimes even 160 seconds)
    3. I did not change the code ion terms of requests, since as I said I use the PHP library (same credentials, ...).
    As of today (2015-01-16 10:30 GMT + 2) running my script, still have the same issues.
    Thank you!
    Steve

  • Anyone Locked a generated SO by item/header when loading from ORDERS05?

    Has anyone managed to sucessfully locked a generated Sales Order when Loading from an IDOC of type ORDERS05?. I create a lock at the item level if necessary, but for some reason it zeroises the item Qty, almost as though there was no Schedule segment supplied, which there is.
    Anyone hit this same problem and overcome it?.
    Blue

    This is in reply to the first post. I don't know what happened after.
    Caused by: java.security.AccessControlException: access denied (java.util.PropertyPermission sun.arch.data.model read)
         at java.security.AccessControlContext.checkPermission(Unknown Source)
         at java.security.AccessController.checkPermission(Unknown Source)
         at java.lang.SecurityManager.checkPermission(Unknown Source)
         at java.lang.SecurityManager.checkPropertyAccess(Unknown Source)
         at java.lang.System.getProperty(Unknown Source)
         at org.eclipse.swt.internal.Library.loadLibrary(Library.java:167)
         at org.eclipse.swt.internal.Library.loadLibrary(Library.java:151)
         at org.eclipse.swt.internal.C.<clinit>(C.java:21)
    If you read the above trace from bottom to top, it shows none of you classes, only classes from that Eclipse library, which seems to loadLibrary() a native DLL. In order to do this, it needs to call System.getProperty( "sun.arch.data.model" ). This call is not allowed from un unsigned applet. So I guess you need to sign the applet and this problem will go away. Many other problems may follow. Just read very very carefully all the related documentation, which I did not.

  • Error logs in job releases forecast from DP to SNP-"Matl does not exist"

    Hi Everyone,
    I am facing error logs in the batch job which releases forecast from DP to SNP
    Forecast release job - Weekly - Through background job
    Forecast category - FA
    Error 1: - Characteristic combination appears on batch job log with an error that
    "GMC does not exist " Even though it exist in R/3 and APO
    All products with error message "Product does not exist" from do exist and have Forecast in Product View
    Error 2: - Deleted KCC keep showing up on the Demand Forecast release job log as errors even though they are invalid KCC and were deleted previously. How do they get removed from error log so they don't get created again
    Material does not exist on the APO Product Master, in R3 there is a delete flag and the MRP type is set to X1 ,it does not exist in the APO Product Master and does not exist in R3.
    Request you to kindly provide any way forward which may be causing error logs of the job
    Thanks in advance,
    Mrigendra Sharma

    Hi Mrigendra,
    Please re-initialize the SNP planning area (program : /SAPAPO/TS_PAREA_INITIALIZE) and then check the consistency by executing the program: /SAPAPO/TS_LCM_CONS_CHECK. If you observe any inconsistency in the log/spool, then re-run the program: /SAPAPO/TS_LCM_CONS_CHECK to observe all green.
    It is recommended to run the consistency program after any master data change. The initialization program should be run at least weekly.
    Try transfering the data again from DP to SNP to see if the error reappear.
    Hope this helps.
    Regards,
    Nawanit

  • How can I compress photos when emailing from iphoto? current photos are 7-8Mb each

    How can I compress photos when emailing from iPhoto?
    current photos are 7-8Mb each if I just attach them directly

    Aperture won't delete the photos from your iPhone. Most users have settled on using Image Capture ater importing into Aperture to delete the photos from the iPhone.

  • Release of History from Info Cube to Planning Area

    Hi Experts,
    I am using program /SAPAPO/RTSINPUT_CUBE to load sales history data from Info Cube to Planning area. Most of the data gets loaded but for few CVCs we get following message: -
    549 combinationens of InfoCube are not contained in the BasisPlobStru
    While checking up these CVCs in transaction /SAPAPO/MC62 and Planning Book I can see that these CVC exist and data is also visible.
    Could anyone please help me out with the reason and what should be done to encounter this.
    Thanks in Advance.
    Thanks and Regards,
    Chandan

    hi Chandan,
    First of sincere apologies for not having read the query completely.
    regarding your query on 549 combinationens of InfoCube are not contained in the BasisPlobStru, as you have stated that the CVCs exist in the MPOS.
    But can you please check if the CVCs maintained in the MPOS are the exact CVCs that are mentioned in the messgae. For example, the message is for location product sales org Country. Can you check if the CVC exists for this combination for which the forecast is being loaded from the source? For example it is possible that data is being loaded for Loc1 Prod1 SalesOrg1 Country1, but the CVC exists for Loc1 Prod1 SalesOrg2 Country1, then such message appears.
    So can you check if the exact CVCs are exisitng in the MPOS as indicated in the messages?
    Rgds, Sandeep
    Sorry again for misreading on your query.

  • BAPI or FM needed to retrive data from SNP Planning Area

    Hi All,
                 There is a planning area created for SNP ,now I need to retrive key figure values present in this SNP Planning area.Does any know of BAPI or FM which can be used to retrive data from SNP Planning Area?
    Thanks,
    Venu

    Hi Venu,
    A)  Please try this BADI Implementation
        /SAPAPO/EXTRACT_EX             Sample implementation
        /SAPAPO/SDP_EXTRACT             Definition name
        /SAPAPO/IF_EX_SDP_EXTRACT   Interface name
        /SAPAPO/CL_IM_EXTRACT_EX     Class name
    The Uses of this BADI are;
    1) You can interrrupt the data extraction process from the planning area.
    2) You can use the CHANGE_INPUT method to override the input parameters for the extractor (sent from the requesting system).
    3) You can use the CHANGE_OUTPUT method to alter the extracted data, derive the values of certain InfoObjects  , for example.
    4) You can use the CHANGE_SELECTION method to modify the selection table that is used for extracting data using a  BAdI method. This is particularly useful when extracting data from an SNP planning area because you cannot specify a location product in the standard selection.
    B)  You can also try the below function modules
    /SAPAPO/CL_IM_EXTRACT_EX - Load key figures of Demand Planning
    /SAPAPO/CDI_TSDMID_KEYFS_LOAD - Load key figure data from TSDM
    Regards
    R. Senthil Mareeswaran.

  • How to extract data from SNP Planning Area

    Hi All,
    I am trying to extract data from SNP Planning Area. i had created the data source as it is given in help document but when i try to test the data source for the data through extractor checker it gives a message "0 data records selected".
    So please help me out if some body have some document in the regard pl forward it to my mail id [email protected]
    Thanks in Advance.
    Best Regards.
    rahul

    Hi Ganesh,
    In SNP you do not have to go to RSA6 u can create datasource in S&DP Administration>change planning area>Extras-->Data Extraction Tools.
    from there u can do all the settings and can as well test.so there is no use of either RSA6 or RSA3.
    bets regards,
    rahul

Maybe you are looking for