Error in invoking the build rule editor, LabView 2011

Hi all. I'm having a problem in Project Explorer. When I right-click on 'Build Specifications' and select New:Application (EXE), I get the following error dialog:
"There was an error in invoking the build rule editor. Please check the corresponding provider directory to see if any VIs are broken."
After this appears, no build specification is created.
I built this application in LabView 2010 on WinXP and was able to compile and run it sucessfully many times over the last few weeks.
The problem started yesterday when I had a problem with a Ring control. I right-clicked it and selected "Edit items" or "Properties" the cursor blinked for a moment but the dialog box did not appear. I removed the Ring control and replaced it with a String control, then when I tried to build the application, I got this error message. At that time, I also noticed that I could not get a Properties dialog box to appear for any controls or indicators.
Yesterday, I installed NI Developer Suite 2011 Version DS2. This seems to have fixed the problem with the dialog boxes and I was able to use the Ring control. However, I still have the problem with the build rule editor.
To determine if there was a problem in my program, I built a new 'Hello World' .vi with just a string control and string indicator. This program has the same problem when trying to build to an .exe.
Currently, I am trying to remove all previous versions of LabView. When that is done, I will reboot and try to build again. If that doesn't work, I will remove ALL National Instruments software and re-install NI Developer Suite 2011 DS2.
I'm hoping someone can provide a solution before it comes to that.
Two other facts which might be relevant: I don't have Administrator on this machine, although I could probably get it if I could make a strong case. Also, I can't be sure, but I think the problem may have started when I undocked my laptop from the docking station to go to a meeting.
I appreciate your help. Thanks in advance.

If you need additional assistance, I encourage you to create a new thread. It is more likely to be answered by other users as a fresh post.
The most likely cause is a corrupted file (or files) in the builder directory.
I would recommend renaming/moving the following folders and performing a repair install of LabVIEW:
\National Instruments\LabVIEW 2011\vi.lib\AppBuilder
\National Instruments\LabVIEW 2011\resource
Regards,
AnjelicaW.
Regards,
Anjelica W.
National Instruments
Applications Engineer

Similar Messages

Error while activating the update rules related to Inventory

Hi,
In standard Cube 0ic_c03, I am including a field 0MAT_DOC that is available in the transfer rules of 2lis_03_bx. And when I include that info object in the cube my update rules are getting deactivated.
When I try to activate the update rules, I am getting the following error message:
1. InfoSource 2LIS_03_BX is only set up for the initial run for non-cumulatives.
2. IC=0IC_C03 IS=2LIS_03_BX error when checking the update rules.
Requesting you to please guide me on how do I go about solving this issue.
Thanks & Regards.

Hi Ganesh,
For implementation of inventory in the BW side, first you need to carry out following steps sequentially:
1. MCNB: Filling set up tables for initial entry of stock balances from 2lis_03_BX
2. OLI1BW:Filling set up tables for stock movements from 2lis_03_BF.
3. OLIZBW:Filling set up tables for inventory revaluations from 2lis_03_UM
Check the Business content cube 0IC_C03.
Also check the document how to inventory management.
For report install the business content report for the cube 0IC_C03 and check it.
check this link for inventory
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Regards
Pcrao.

Initializing error while invoking the SQLPULS in Oracle 11G.

Hello All,
I installed Oracle 11G freshly and now I am geting following errors while invoking the sqlplus from the client side.
C:\Documents and Settings\Administrator.SC14FT1>sqlplus
Error 57 initializing SQL*Plus
Error loading message shared library
Any idea ?
Thanks
With Regards
Hemant Joshi.

Hello,
I am getting the same error even after setting the oracle_home.
C:\Documents and Settings\Administrator.SC14FT1>set ORACLE_HOME=D:\Oracle\Ora11g
C:\Documents and Settings\Administrator.SC14FT1>echo %ORACLE_HOME%
D:\Oracle\Ora11g
C:\Documents and Settings\Administrator.SC14FT1>sqlplus
Error 57 initializing SQL*Plus
Error loading message shared library
Thanks
With Regards
Hemant Joshi

Error ocurred in the derivation rule

Hi Guys
I am trying to create a sales order. But having this error
(error ocurred in the derivation rule) Msg no. K/111
How do I fix this please.
Thanks

Hi
The error desciption means that the issue is in the derivation rules for the source fields.
No entry in a derivation rule was found for the specified source fields.
The derivation rule was set up so that an error message appears when this happens.The required derivation rule entry would need the missing source fields.
Please click on the error message which should give you the missing source fields list. Maintain configuration in tcode KEDE and KEDR for the these fields and save,
Let me know if there are any issues. Hope this helps.
Karthik

InvocationTargetException:There was an error while invoking the operation.

Hi,
I am having issues getting my remote server configured right after everything working properly on the local host. I am getting the following error:
InvocationTargetException:There was an error while invoking the operation. Check your operation inputs or server code and try invoking the operation again.
The key parts of the large message I am getting after that are:
Class "test" does not exist: Plugin by name 'Test' was not found in the registry; used paths:: ..../smii/test/ ID5D8FE3F-A1D1-4174-98B3-4BED10FD8FFE I79685B66-D792-E4E9-13B3-00004DA5951B I0F94D267-0704-3C89-0B5B-0000090BA097 134950398900
I don't know how this last part of the address with random number and letters is getting there.
Also, when searching for my server settings today it seems to add a "-1" on the end of the initial directory on the server...not sure why but I seem to be having major issues implementing the service remotely.
Any help would be appreciated.
Cheers, Andrew

I also cannot get my flex server to validate. It always comes up with the error of the server is either off or wrong root url even when everything is set up right and I can access everything via either finder or the web browser.
Any suggestions? The server does not have any fire walls up to prevent access.

KO8G-sudden surge of error mess(Maintain the settlement rule of the sender)

hi!
we encountered a lot of error message(Maintain the settlement rule), more than 4k, after we run KO8G, this is the first time happened to us. when we checked the PM orders from the error message, most of it came from previous periods even previous years, which are already closed. we can understand if there are posting for the said order for the period, but there is none. why those closed orders with no postings, still read by the settlement? were having a diffuclty of checking it one by one, we only expect less than 100. we hope you can help us.
thanks in advance
vince

Dear,
As found...
Maintain only the FROM DATE... Remove the TO DATE as 10.2010 (Extend the TO DATE)
OR
Create a new settlement rule which is valid in the Period of Execution of settlement
Regards,
Syed Hussain.

How to run the VI developed in labVIEW 2011 in its previous versions

Hi all,
I am currently using LabVIEW 2011 in my home PC.
But, all my school computers are installed with LabVIEW 2010 and 2010 SP1.
How to run the VI developed in LabVIEW 2011 in its previous versions?
Is there any conveter for that?
Regards
Prasanth T
Solved!
Go to Solution.

Open the VI in LabVIEW 2011 and use the File menu option, Save for Previous Version.

Error while invoking the WSDL service of EBS from BPEL process

Hi Team,
when we are calling webservice client to call WSDL service which is published in Oracle EBS integrated SOA Gateway from BPEL process.
After invoking, we are getting the below error
<bpelFault><faultType>0</faultType><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>FND_SOA_SERVICE_EXECUTION_ERR:oracle.apps.fnd.soa.util.SOAException: ServiceExecutionError: Error while executing the service Exception returned from JCA Service Runtime. Exception returned from JCA Service Runtime. null :Please see service monitor logs for full error trace</summary></part><part name="detail"><detail>oracle.j2ee.ws.client.jaxws.JRFSOAPFaultException: Client received SOAP Fault from server : FND_SOA_SERVICE_EXECUTION_ERR:oracle.apps.fnd.soa.util.SOAException: ServiceExecutionError: Error while executing the service Exception returned from JCA Service Runtime. Exception returned from JCA Service Runtime. null :Please see service monitor logs for full error trace</detail></part><part name="code"><code>{http://schemas.xmlsoap.org/soap/envelope/}Server</code></part></remoteFault></bpelFault>
API Name : OE_ORDER_PUB.PROCESS_ORDER
could you please let me know the exact problem and provide the solution.
Thanks
Phani Ch.

Hi Phani,
Are you able to reproduce issue as below:
1. Login to Application as sysadmin.
2. Navigate to Intergrated SOA Gateway > Integration Repository.
3. Click on search on right hand side of the page.
4. In the Internal Name type "FND_USER_PKG" and click Go.
5. Click on the User link.
6. Under the "Web Service - SOA Provider", click in the "View WSDL". Copy the complete URL "http://test:8003/webservices/SOAProvider/plsql/fnd_user_pkg/?wsdl"
7. Open the soapUI.
8. Click File > new soapUI Project.
9. Test the web service.
If yes,
I think you might be need to execute a patch:
solution:
To implement the solution, please execute the following steps:
1. Download and review the readme and pre-requisites for iAS Patch 18855074.
Note: Above Merge Label Request (MLR) is build for EBS 12.1.3 having OC4J 10.1.3.5.
2. Enable the profile option "EBS Adapter for BPEL, Function Security Enabled".
a. Login as SYSADMIN user and Navigate to System >Profile and Search for "EBS Adapter for BPEL, Function Security Enabled" (Internal name :EBS_ADAPTER_FUNCTION_SEC_ENABLED)
b. Set the Value to 'Y' at SITE level . This means function security feature is enabled and all API calls for PL/SQL APIs, Oracle e-Commerce Gateway, and concurrent programs will be checked for user security before they are invoked.
3. Retest the issue by Generating and Deploying the required package.
4. Migrate the solution as appropriate to other environments.
Thanks
Ranjan

Error while Loading the validator-rules.xml in Struts 1.2

Hello Guys,
I am trying to use the Struts 1.2.4 on Jdk1.3 inside WSAD5.1 and i get the following error when loading the application. It breaks on the fist line inside validator-rules.xml witht hte following error. My first line in the validator-rules.xml is
<!DOCTYPE form-validation PUBLIC
"-//Apache Software Foundation//DTD Commons Validator Rules Configuration 1.1.3//EN"
"http://jakarta.apache.org/commons/dtds/validator_1_1_3.dtd">
I do have the commons-validator inside the Lib folder. I also tried it out by removing the above reference to dtd in the validator-rules.
Can any one help me with some suggestions on something i am missing.
----------------------ERROR BELOW------------------------------------------
[11/23/04 17:45:44:772 EST] 3ca45923 ValidatorPlug I org.apache.struts.validator.ValidatorPlugIn Loading validation rules file from '/WEB-INF/validator-rules.xml'
[11/23/04 17:45:44:772 EST] 3ca45923 ValidatorPlug I org.apache.struts.validator.ValidatorPlugIn Loading validation rules file from '/WEB-INF/validation.xml'
[11/23/04 17:45:45:053 EST] 3ca45923 Digester E org.apache.commons.digester.Digester Parse Error at line 1 column 17: Document is invalid: no grammar found.
[11/23/04 17:45:45:063 EST] 3ca45923 Digester E org.apache.commons.digester.Digester TRAS0014I: The following exception was logged org.xml.sax.SAXParseException: Document is invalid: no grammar found.
at org.apache.xerces.util.ErrorHandlerWrapper.createSAXParseException(Unknown Source)
at org.apache.xerces.util.ErrorHandlerWrapper.error(Unknown Source)
at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanStartElement(Unknown Source)
at org.apache.xerces.impl.XMLNSDocumentScannerImpl$NSContentDispatcher.scanRootElementHook(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.DTDConfiguration.parse(Unknown Source)
at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
at org.apache.commons.digester.Digester.parse(Digester.java:1591)
at org.apache.commons.validator.ValidatorResources.<init>(ValidatorResources.java:159)
at org.apache.struts.validator.ValidatorPlugIn.initResources(ValidatorPlugIn.java:233)
at org.apache.struts.validator.ValidatorPlugIn.init(ValidatorPlugIn.java:164)
at org.apache.struts.action.ActionServlet.initModulePlugIns(ActionServlet.java:839)
at org.apache.struts.action.ActionServlet.init(ActionServlet.java:332)
at javax.servlet.GenericServlet.init(GenericServlet.java:258)
at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doInit(StrictServletInstance.java:82)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._init(StrictLifecycleServlet.java:147)
at com.ibm.ws.webcontainer.servlet.PreInitializedServletState.init(StrictLifecycleServlet.java:270)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.init(StrictLifecycleServlet.java:113)
at com.ibm.ws.webcontainer.servlet.ServletInstance.init(ServletInstance.java:189)
at javax.servlet.GenericServlet.init(GenericServlet.java:258)
at com.ibm.ws.webcontainer.webapp.WebAppServletManager.addServlet(WebAppServletManager.java:870)
at com.ibm.ws.webcontainer.webapp.WebAppServletManager.loadServlet(WebAppServletManager.java:224)
at com.ibm.ws.webcontainer.webapp.WebAppServletManager.loadAutoLoadServlets(WebAppServletManager.java:542)
at com.ibm.ws.webcontainer.webapp.WebApp.loadServletManager(WebApp.java:1277)
at com.ibm.ws.webcontainer.webapp.WebApp.init(WebApp.java:283)
at com.ibm.ws.webcontainer.srt.WebGroup.loadWebApp(WebGroup.java:387)
at com.ibm.ws.webcontainer.srt.WebGroup.init(WebGroup.java:209)
at com.ibm.ws.webcontainer.WebContainer.addWebApplication(WebContainer.java:987)
at com.ibm.ws.runtime.component.WebContainerImpl.install(WebContainerImpl.java:136)
at com.ibm.ws.runtime.component.WebContainerImpl.start(WebContainerImpl.java:356)
at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:418)
at com.ibm.ws.runtime.component.DeployedApplicationImpl.fireDeployedObjectStart(DeployedApplicationImpl.java:787)
at com.ibm.ws.runtime.component.DeployedModuleImpl.start(DeployedModuleImpl.java:354)
at com.ibm.ws.runtime.component.DeployedApplicationImpl.start(DeployedApplicationImpl.java:575)
at com.ibm.ws.runtime.component.ApplicationMgrImpl.startApplication(ApplicationMgrImpl.java:271)
at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:249)
at com.ibm.ws.runtime.component.ContainerImpl.startComponents(ContainerImpl.java:536)
at com.ibm.ws.runtime.component.ContainerImpl.start(ContainerImpl.java:413)
at com.ibm.ws.runtime.component.ApplicationServerImpl.start(ApplicationServerImpl.java:125)
at com.ibm.ws.runtime.component.ContainerImpl.startComponents(ContainerImpl.java:536)
at com.ibm.ws.runtime.component.ContainerImpl.start(ContainerImpl.java:413)
at com.ibm.ws.runtime.component.ServerImpl.start(ServerImpl.java:183)
at com.ibm.ws.runtime.WsServer.start(WsServer.java:128)
at com.ibm.ws.runtime.WsServer.main(WsServer.java:225)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:41)
at java.lang.reflect.Method.invoke(Method.java:386)
at com.ibm.ws.bootstrap.WSLauncher.main(WSLauncher.java:94)
at com.ibm.etools.websphere.tools.runner.api.ServerRunnerV5$1.run(ServerRunnerV5.java:97)
org.xml.sax.SAXParseException: Document is invalid: no grammar found.
at org.apache.xerces.util.ErrorHandlerWrapper.createSAXParseException(Unknown Source)
at org.apache.xerces.util.ErrorHandlerWrapper.error(Unknown Source)
at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanStartElement(Unknown Source)
at org.apache.xerces.impl.XMLNSDocumentScannerImpl$NSContentDispatcher.scanRootElementHook(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.DTDConfiguration.parse(Unknown Source)
at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
at org.apache.commons.digester.Digester.parse(Digester.java:1591)
at org.apache.commons.validator.ValidatorResources.<init>(ValidatorResources.java:159)
at org.apache.struts.validator.ValidatorPlugIn.initResources(ValidatorPlugIn.java:233)
at org.apache.struts.validator.ValidatorPlugIn.init(ValidatorPlugIn.java:164)
at org.apache.struts.action.ActionServlet.initModulePlugIns(ActionServlet.java:839)
at org.apache.struts.action.ActionServlet.init(ActionServlet.java:332)
at javax.servlet.GenericServlet.init(GenericServlet.java:258)
at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doInit(StrictServletInstance.java:82)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._init(StrictLifecycleServlet.java:147)
at com.ibm.ws.webcontainer.servlet.PreInitializedServletState.init(StrictLifecycleServlet.java:270)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.init(StrictLifecycleServlet.java:113)
at com.ibm.ws.webcontainer.servlet.ServletInstance.init(ServletInstance.java:189)
at javax.servlet.GenericServlet.init(GenericServlet.java:258)
at com.ibm.ws.webcontainer.webapp.WebAppServletManager.addServlet(WebAppServletManager.java:870)
at com.ibm.ws.webcontainer.webapp.WebAppServletManager.loadServlet(WebAppServletManager.java:224)
at com.ibm.ws.webcontainer.webapp.WebAppServletManager.loadAutoLoadServlets(WebAppServletManager.java:542)
at com.ibm.ws.webcontainer.webapp.WebApp.loadServletManager(WebApp.java:1277)
at com.ibm.ws.webcontainer.webapp.WebApp.init(WebApp.java:283)
at com.ibm.ws.webcontainer.srt.WebGroup.loadWebApp(WebGroup.java:387)
at com.ibm.ws.webcontainer.srt.WebGroup.init(WebGroup.java:209)
at com.ibm.ws.webcontainer.WebContainer.addWebApplication(WebContainer.java:987)
at com.ibm.ws.runtime.component.WebContainerImpl.install(WebContainerImpl.java:136)
at com.ibm.ws.runtime.component.WebContainerImpl.start(WebContainerImpl.java:356)
at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:418)
at com.ibm.ws.runtime.component.DeployedApplicationImpl.fireDeployedObjectStart(DeployedApplicationImpl.java:787)
at com.ibm.ws.runtime.component.DeployedModuleImpl.start(DeployedModuleImpl.java:354)
at com.ibm.ws.runtime.component.DeployedApplicationImpl.start(DeployedApplicationImpl.java:575)
at com.ibm.ws.runtime.component.ApplicationMgrImpl.startApplication(ApplicationMgrImpl.java:271)
at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:249)
at com.ibm.ws.runtime.component.ContainerImpl.startComponents(ContainerImpl.java:536)
at com.ibm.ws.runtime.component.ContainerImpl.start(ContainerImpl.java:413)
at com.ibm.ws.runtime.component.ApplicationServerImpl.start(ApplicationServerImpl.java:125)
at com.ibm.ws.runtime.component.ContainerImpl.startComponents(ContainerImpl.java:536)
at com.ibm.ws.runtime.component.ContainerImpl.start(ContainerImpl.java:413)
at com.ibm.ws.runtime.component.ServerImpl.start(ServerImpl.java:183)
at com.ibm.ws.runtime.WsServer.start(WsServer.java:128)
at com.ibm.ws.runtime.WsServer.main(WsServer.java:225)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:41)
at java.lang.reflect.Method.invoke(Method.java:386)
at com.ibm.ws.bootstrap.WSLauncher.main(WSLauncher.java:94)
at com.ibm.etools.websphere.tools.runner.api.ServerRunnerV5$1.run(ServerRunnerV5.java:97)
[11/23/04 17:45:45:093 EST] 3ca45923 Digester E org.apache.commons.digester.Digester Parse Error at line 1 column 17: Document root element "form-validation", must match DOCTYPE root "null".
[11/23/04 17:45:45:093 EST] 3ca45923 Digester E org.apache.commons.digester.Digester TRAS0014I: The following exception was logged org.xml.sax.SAXParseException: Document root element "form-validation", must match DOCTYPE root "null".
at org.apache.xerces.util.ErrorHandlerWrapper.createSAXParseException(Unknown Source)
at org.apache.xerces.util.ErrorHandlerWrapper.error(Unknown Source)
at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanStartElement(Unknown Source)
at org.apache.xerces.impl.XMLNSDocumentScannerImpl$NSContentDispatcher.scanRootElementHook(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.DTDConfiguration.parse(Unknown Source)
at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
at org.apache.commons.digester.Digester.parse(Digester.java:1591)
at org.apache.commons.validator.ValidatorResources.<init>(ValidatorResources.java:159)
at org.apache.struts.validator.ValidatorPlugIn.initResources(ValidatorPlugIn.java:233)
at org.apache.struts.validator.ValidatorPlugIn.init(ValidatorPlugIn.java:164)
at org.apache.struts.action.ActionServlet.initModulePlugIns(ActionServlet.java:839)
at org.apache.struts.action.ActionServlet.init(ActionServlet.java:332)
at javax.servlet.GenericServlet.init(GenericServlet.java:258)
at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doInit(StrictServletInstance.java:82)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._init(StrictLifecycleServlet.java:147)
at com.ibm.ws.webcontainer.servlet.PreInitializedServletState.init(StrictLifecycleServlet.java:270)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.init(StrictLifecycleServlet.java:113)
at com.ibm.ws.webcontainer.servlet.ServletInstance.init(ServletInstance.java:189)
at javax.servlet.GenericServlet.init(GenericServlet.java:258)
at com.ibm.ws.webcontainer.webapp.WebAppServletManager.addServlet(WebAppServletManager.java:870)
at com.ibm.ws.webcontainer.webapp.WebAppServletManager.loadServlet(WebAppServletManager.java:224)
at com.ibm.ws.webcontainer.webapp.WebAppServletManager.loadAutoLoadServlets(WebAppServletManager.java:542)
at com.ibm.ws.webcontainer.webapp.WebApp.loadServletManager(WebApp.java:1277)
at com.ibm.ws.webcontainer.webapp.WebApp.init(WebApp.java:283)
at com.ibm.ws.webcontainer.srt.WebGroup.loadWebApp(WebGroup.java:387)
at com.ibm.ws.webcontainer.srt.WebGroup.init(WebGroup.java:209)
at com.ibm.ws.webcontainer.WebContainer.addWebApplication(WebContainer.java:987)
at com.ibm.ws.runtime.component.WebContainerImpl.install(WebContainerImpl.java:136)
at com.ibm.ws.runtime.component.WebContainerImpl.start(WebContainerImpl.java:356)
at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:418)
at com.ibm.ws.runtime.component.DeployedApplicationImpl.fireDeployedObjectStart(DeployedApplicationImpl.java:787)
at com.ibm.ws.runtime.component.DeployedModuleImpl.start(DeployedModuleImpl.java:354)
at com.ibm.ws.runtime.component.DeployedApplicationImpl.start(DeployedApplicationImpl.java:575)
at com.ibm.ws.runtime.component.ApplicationMgrImpl.startApplication(ApplicationMgrImpl.java:271)
at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:249)
at com.ibm.ws.runtime.component.ContainerImpl.startComponents(ContainerImpl.java:536)
at com.ibm.ws.runtime.component.ContainerImpl.start(ContainerImpl.java:413)
at com.ibm.ws.runtime.component.ApplicationServerImpl.start(ApplicationServerImpl.java:125)
at com.ibm.ws.runtime.component.ContainerImpl.startComponents(ContainerImpl.java:536)
at com.ibm.ws.runtime.component.ContainerImpl.start(ContainerImpl.java:413)
at com.ibm.ws.runtime.component.ServerImpl.start(ServerImpl.java:183)
at com.ibm.ws.runtime.WsServer.start(WsServer.java:128)
at com.ibm.ws.runtime.WsServer.main(WsServer.java:225)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:41)
at java.lang.reflect.Method.invoke(Method.java:386)
at com.ibm.ws.bootstrap.WSLauncher.main(WSLauncher.java:94)
at com.ibm.etools.websphere.tools.runner.api.ServerRunnerV5$1.run(ServerRunnerV5.java:97)

This is a JDeveloper Forum, not a Websphere one. A better place to ask this question woudl be on a Forum that deals with WSAD or the Struts user list (http://struts.apache.org/learning.html)

Error while invoking the URL of xcm for ISA application

Hi,
I am getting the an error when I invoke the below urls. I am working on ISA application.
http://localhost:port/xxx/b2b/init.do
http://localhost:port/xxx/admin/xcm//init.do
The code was build successfully without any errors.
Error:
Application error occurred during request processing.
Details: Error [javax.servlet.ServletException: Initialization of Extended Configuration Management failed.
Could not initialize XCM configuration in Database.
Check if you have deployed the Software Component 'SAP JAVA DATA DICTIONARY 5.0'].
Exception id: [44455354420000790000005000001D3400047AAFFB0A8DAC]
Could any one please help me in resolving this.
Regards
MQ

Hi Rafael,
Please deploy the following two sca files.
SAPCRMDICXXXXX.SCA
SAPJ2EECORPXXXXX.SCA
Regards
V. Suresh Kumar

Error while invoking the ABAP Proxy via SOAP Adapter

Hi,
My scenario involves SOAP Client invoking a webservice hosted in PI which in turn invokes the ABAP Proxy asyncronously.
SOAP Client -> PI -> ECC (ABAP Proxy) . This works fine.
Next , I have exposed the ECC Service Interface as webservice using SOA Manager transaction. Now, once the service is created using SOAManager, i replaced the XI Adapter with SOAP Adapter and provided the target URL as the URL provided by the SOAManager.
SOAP Client -> PI -> ECC (ABAP Proxy via SOAP Adapter)
With this approach, i am encountering the below error message
2009-05-29 12:17:55 Error Adapter Framework caught exception: null
2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
Any ideas on the above errror message? Any pointers or inputs will be appreciated.
Thanks,
Vinayak Kamath

> 2009-05-29 12:17:55 Error Adapter Framework caught exception: null
> 2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
This is a generic error message which does not have any information about the error which has occurred.
Do you see any error messages in the SOAP client?
Regards
Stefan

Error while Installing the update rules in business content

Hi All,
I got the following error,when i was installing the update rules : Object UPDR D4C8V3KA00XD5ANPVUAH9KQDJ could not be found in version M. but these update rules appear as inactive mode in bi content-object types-updaterules-selection-inactive status.
Please could i know where we can check version status for business content pdaterules. but it was showing NOT FOUND IN Version M .
please anybody can help me for solving this error.
i will asign points for your inputs.
regards,
kumar.
Edited by: kumar kumar on May 20, 2009 5:58 AM

Hi,
You can check the Content Release and Last Content Modification for your update Rules following thee given path:
RSA1>BI Content>object Types>Update Rules>Select object(search for ur update rules) -->Transfer Selections.
After they are being transfered to the right pane.On right pane (where you can see the its technical name) scroll towards right you will see last three tabs as "Content Release,Last Content Modification and Person responsible".
Change the Grouping as "Before and afterwards" and then try installing.
Hope it helps.

Conversion exit error while activating the transfer rules

Hello gurus,
We are doing a function module extraction with 3.X data sources.
On activating the transfer rules , i am getting a conversion exit error for "0fiscyear", but in the infoobject we don't have the conversion exit for it.
Points will be awarded for any kind of response.
Thanks and Regards,
Anu.

Hi,
1. Please check in the transformation, its necessary to provide the fiscal variant mapping as well when ur mapping fiscal year object. as on the basis of that value fiscal period will be derived.
2 I guess ur doing direct mapping (Time conversion) and there is no routine written for that. if any u can check that as well for any error.
Thanks
dipika
Edited by: Dipika Tyagi on Jun 25, 2008 7:39 AM

Error while invoking the commit operation in a data control

JDeveloper 11.1.2
When we invoke the commit operation exposed thru the data control, sometimes we get the following error:
Caused by: java.lang.NullPointerException
at oracle.jbo.server.DBTransactionImpl.addPendingEvent(DBTransactionImpl.java:5751)
at oracle.jbo.server.DBTransactionImpl.sendOrQueueEventForSharedTrans(DBTransactionImpl.java:6659)
at oracle.jbo.server.DBTransactionImpl.fireTransactionStateEvent(DBTransactionImpl.java:6693)
at oracle.jbo.server.DBTransactionImpl.doAfterCommit(DBTransactionImpl.java:2301)
at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:2159)
at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2352)
This issue is intermittent but occurs many times.
I am NOT able to find any issues with the code.
Any pointers on resolving the issue.
Thanks,
Navaneeth

My problem is special, we change the AM configuration to EJB (2.1 stateful, let's put performance issue aside) and deploy remotely, however, there's a NullPointerException occurred at the same line number as your case when we change the task flow id of the dynamic region, because the ADF framework always calls Rollback during region refresh, this Rollback cause the NullPointerException. Even if I caught and ignore this error, there will be always a NullPointerException thrown the next time we do any VO attribute update (kind of same as the blog entry described below).
http://adfbugs.blogspot.com/2011/08/rollback-is-executed-when-region-is.html
I am not sure if we could benefit from fixing of your SR by Oracle. Please share if you have any hints, thank you!
Edited by: codeplay on Mar 30, 2012 9:42 AM

Error while invoking the DB adapter

Trying to create simple BPEL process which will read the csv file and invoke the db adapter to insert the data in database. While invoking the db adapter I am getting following error
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>null</code>
</part><part name="summary"><summary>file:/C:/SOA/bpel/domains/default/tmp/.bpel_InvoiceInterfaceBpelProcess_1.0_498d7f87aea45176551864b959e5a666.tmp/Insertin2db.wsdl [ Insertin2db_ptt::insert(HboxDataCollection) ] - WSIF JCA Execute of operation 'insert' failed due to: Mapping Not Found Exception.
The mapping [Voucher_id] for descriptor [class bpel___localhost_default_InvoiceInterfaceBpelProcess_1_0__MD5_432fb7660f0d9b3a1a97de70f60261ee_.Insertin2db.HboxData] could not be found. The input xml record had an element [HboxData/Voucher_id].
; nested exception is:
ORABPEL-11627
Mapping Not Found Exception.
The mapping [Voucher_id] for descriptor [class bpel___localhost_default_InvoiceInterfaceBpelProcess_1_0__MD5_432fb7660f0d9b3a1a97de70f60261ee_.Insertin2db.HboxData] could not be found. The input xml record had an element [HboxData/Voucher_id].
Make sure that the input xml is valid relative to the xsd and that the mapping exists in the Mappings.xml. If an old version of the descriptor without this mapping has been loaded by the database adapter, you may need to bounce the app server. If the same descriptor is described in two separate Mappings.xml files, make sure both versions include this attribute/mapping.
</summary>
</part><part name="detail"><detail>null</detail>
</part></bindingFault>
your help is appriciated.
Thanks,
Vipul

I'm having the same issue with my toplink mappings used by the database adapter-insert operation.
The mapping for the ID, primary key field, exists in the mapping-file op toplink and the attribute exists as well in the java generated wrapper classes.
I'm still getting the following exception:
file:/C:/oracle/product/10.1.3.1/OracleAS/bpel/domains/default/tmp/.bpel_CreateDossierAdoption_1.0_4ffe4561c54c844933a9c0246cd89c90.tmp/InsertNewDossier.wsdl [ InsertNewDossier_ptt::insert(DossiersCollection,DossiersCollection) ] - WSIF JCA Execute of operation 'insert' failed due to: Mapping Not Found Exception. The mapping [ID] for descriptor [class bpel___localhost_default_CreateDossierAdoption_1_0__MD5_e6a42f53d5d0212f9c27acd74ba41e7a_.InsertNewDossier.Dossiers] could not be found. The input xml record had an element [Dossiers/ID]. ; nested exception is: ORABPEL-11627 Mapping Not Found Exception. The mapping [ID] for descriptor [class bpel___localhost_default_CreateDossierAdoption_1_0__MD5_e6a42f53d5d0212f9c27acd74ba41e7a_.InsertNewDossier.Dossiers] could not be found. The input xml record had an element [Dossiers/ID]. Make sure that the input xml is valid relative to the xsd and that the mapping exists in the Mappings.xml. If an old version of the descriptor without this mapping has been loaded by the database adapter, you may need to bounce the app server. If the same descriptor is described in two separate Mappings.xml files, make sure both versions include this attribute/mapping.
Regards,
Nathalie

Error in invoking the build rule editor, LabView 2011

Similar Messages

Maybe you are looking for