Error in logging using "Default" account to access visual administrator

Dear experts,
i had encountered the following error message when i tried to login to Visual Administrator using go.bat using default.
Unable to look up connection Default
http://L31021:8108/msgserver/text/logon returned empty list of connection parameters
and when i tried using another account and direct connect to a dispatcher node, they say error while connecting.
please give me advice on how to solve the problem.
thank you for the attention given and time.
with thanks,
kejun

Hello Tan,
The error from the first type of connection indicates that the message server list of registered nodes was empty. The list is empty when the server and the dispatcher nodes are not running or using different message server.
First check in the dev_server0 and dev_dispatcher files in the work directory that they are connection to the same message server. Then in std_server0.out and std_dispatcher.out try to find why the server and the dispatcher nodes didnu2019t register in the message server. Also check the default trace files of both nodes.
Regards,
Ventsi Tsachev
Technology Development Support (J2EE Engine)
SAP Labs, Palo Alto, Ca (USA)

Similar Messages

  • How to remotely access visual administrator in  AIX system

    Hi Friends
    i want to remotely access visual administrator of my client system which is on AIX platform,can any one please tell me the step by step procedure of connecting to that system and then which command to use to start Visual administrator.
    Like the way we do in windows remote desktop and run the go.bat file  in the admin folder of the j2ee,similarly wat should i do to start this go.bat in this AIX system.
    Any help would be appreciated and rewarded with points
    Thanks and Regards
    Rashmi

    Just found the apex_access_control table in my schema.
    Guess I'll just use that.

  • Error message: "Logging into the account failed because an error occurred."

    Hello,
    We had an XServe G5 2.0 DP 5GB/80/2x250 running Mac OS X 10.3.9 Server with all updates as a main server for a school. The server provides Open Directory Master as well as File-Sharing (AFP and SMB) and e-mail services to about 30 teachers and 300 students. The user home directories reside on the server. A web server also runs on the machine. The students use a pool of laptops, which are configured with a local guest and admin account as well as access to the server-based home directories with Directory Access. The server had the OS running on the 80 GB hard drive and all data (Home directories, mail database, website, etc. were on the two mirrored 250 GB drives.) All was working well until...
    A few weeks ago, one of the two 250 GB died. We decided to use the opportunity to upgrade the server and set it up with 3 x 750 GB, two drives running as a mirrored pair to hold OS AND Data, the other as a stand-by unit to help replace a failing drive.
    We migrated the OS and all data from the previous drives without a problem. Since now, all data is residing on one pair of drives, we put the data from the old "Data" drive in a folder on the root level of the new HD pair. We wrote a script that launches at startup which creates the symlink in /Volumes/Data to link to /Data. We thought that with this, all would be well.
    However: When any user tries to log into his account from any iBook (10.3.9 or 10.4.11) (wirelessly), he gets the message:
    "Logging into the account failed because an error occurred. The home folder for the user account is located on an afp or smb server. contact your system administrator for help"
    If the user logs in to the guest account on the iBook, then accesses his home directory via file-sharing, he can see (read/write) all his data. So, the data and privileges seem to be OK, as well as Open Directory working correctly. Mail and the web work well also, as does logging in to a user account from one of the PC's (wired).
    Can anyone make any suggestions as to how to fix the situation? Currently, the users are using the guest accounts and accessing their data via filesharing, as well as using webmail for their e-mail, but this is a major nuisance.
    Any help will be greatly appreciated.
    Best regards,
    Alain Chammas
    A user trying to access his account from a PC (wired) has no problems.

    A good number of folks are having problems with this same error message at login, and nobody seems to have found a fix.
    I believe I have stumbled upon, if not a solution, at least part of the answer. If you're logged into a 10.4 workstation, open a Finder window and click the "Network" icon. The first time you do this, you'll only see "Library" and "Servers" icons, but if you let it sit for a moment, other folders will magically appear. One of these is "My Network" which is the critical part.
    In Workgroup Manager, edit one of your users' home directory configuration. There's a URL piece, usually "afp://server.domain.com/Users" (which is what shows up in the window when you click on the "Home" tab for that user), and then there's a "Home" path that is usually something like "/Network/Servers/servername/Users/username". Trouble is, you've noticed that 10.4 doesn't put servers into the "Servers" path, but rather into the "My Network" path.
    So, if you change that "Home" path to read "/Network/My Network/servername/Users/username", it should work--with one caveat. Apparently 10.4 doesn't create the "My Network" path on a given client until you actually browse the network on that client. If you haven't logged into a 10.4 workstation and browsed the network, the "My Network" path won't be there, and you'll still get the error. Login as a local user, browse the network (so that the "My Network" folder shows up), logout, and then login as an Open Directory user, and it should work.
    I'm betting that 10.3, 10.4, and 10.5 all handle this issue differently, so if you're in a mixed-version situation, you may have to experiment to find a workable fix.
    Derndest thing I ever saw.

  • Always use default account for replays and forwards

    Dear All,<o:p></o:p>
    I have the next setup:<o:p></o:p>
    .- Two different pop account using the same .pst file, by default outlook use the account and emails is received as the from account
    when replying and forwarding that email.<o:p></o:p>
    I need to always reply and forward from the default account even when the emails is received by the other pop.
    Thanks in advanced.<o:p></o:p>

    Hi Daniel,
    Edit the SMTP (Outgoing Server Settings) server information and assign the details of second email address through which you want to send email.
    You can also use the given VB code to perform this task:
    Set oMail = Application.ActiveExplorer.Selection(1).Reply
    Source:
    http://www.slipstick.com/outlook/email/choose-the-account-to-send-a-reply-from/
    Note: Improve community discussions by marking the answers helpful otherwise respond back for further help.
    Thanks
    Clark Kent

  • When i login with microsoft account cannot access with administrative share c$

    i have a problem when i login to windows with microsoft account cannot access any network computer with administrative sharing c$,d$ with windows 8.1 
    but when i login with local account can access
    and some people tell  me create key in regedit t fix it 
    after enter user name and password show this error 
    and i apply your instruction  and not fix until now
    note:
     my Machine windows 8.1 if another machine in network windows 7 can access a hidden share if machine in network windows 8.1 show this message in image 2 
    but if i login with local user can i access all machine hidden share network windows 7 and 8.1

    yes this computer i want to access  name poland2-work and have two users 
    first :administrator
    second : poland 2

  • J2EE_Admin cannot access Visual Administrator

    I hope all you gurus are doing well.
    OK, so here is the issue, I am trying to configure Adobe Froms on one of our SAP systems. Part of the installation requiers me to access Visual Admin. I am able to access VA using the emergency user but I cannot make any changes to the settings. I am NOT able to access the VA using J2EE_ADMIN or any other user. I keep on getting the following error:
    Caller Visual_Admin not authorized, only role administrators is allowed to access JMX
    When I initially encountered the error I accessed VA using SAP* and there was no Administrators group. So I created the group but I am not sure if that made any difference. I've checked the roles in SAP and J2EE_ADMIN has the SAP_J2EE_ADMIN role assigned to it.
    I have also created other users and assigned the SAP_J2EE_ADMIN role to them but it still is not working.
    Other than that is there anything that needs to be done within VA to add certain privilages to a Group?
    How do I create the Administrators group?
    Is SAP* limited to what it can do in VA?

    Hi Glen
    This forum is for Java EE 5 - which means that it's focused on NetWeaver 7.1 and up. These versions do not have Visual Administrator anymore. I think the default administrator is also now called "Administrator" (not "J2EE_Admin" anymore) - but I could be wrong on this last point.
    Please could you clarify which version of NW you're using?
    Thanks
    Stuart

  • Access visual administrator from the desktop

    Hi,
    Can anyone tell me if it is possible to access the visual administrator of the XI server from a PC in the network by downloading the go.bat file from the marketplace?
    Thanks.

    Hi,
    You need Xterm/X-windows to access Visual Admin of your remote server with in the network.
    I think we can access the PI server,by just download the go.bat file from service market place..
    cheers
    deepu

  • Error in Logging using log4j When deployed in weblogic server

    I have deployed an SOAP based web service application as an war file and used log4j propertiers to do application logging .When i tested the application through a JAVA client the log4j log file has all the application log information but when i deployed it in the weblogic server 10.3.3 and tested it through SOAP UI it gives me just "Run time error exception" in the log4j log file(which is returned in the SOAP response) as against the application logs which i need. I have also added <wls:package-name>org.apache.log4j.*</wls:package-name> in the weblogic.xml and also changwed the logging to the log4j logging in the server ( which was perviously JDK logging) .But still it is not returning the complete application error stack trace in the log4j log file(and also in the weblogic command console) I need to get the application error stack trace in the log4j log file ( and also in the console) so it would be easy to debug the code.
    Please help me out in doing the same.
    thanks in advance

    Noman,
    have you checked that the folder D:\OracleJeveloper\Middleware\jdk160_14_R27.6.5-32 contains the jre?
    Timo

  • Error Frame logging using NI-XNET hardware

    Hi all, I am using NI-XNET hardware (PXI-8513 board) to send diagnostic messages to electronic control unit devices.
    I am logging transmitted and received CAN messages. Now I would also to log error frames messages.
    How can I perform this?
    Regards,
    Claudio

    just set the interface property
    Interface:Bus Error Frames to Input Stream? = TRUE
    The Bus Error Frames to Input Stream? property configures the hardware to place a CAN or
    LIN bus error frame into the Stream Input queue after it is generated. A bus error frame is
    generated when the hardware detects a bus error. For more information about the bus error
    frame, refer to Special Frames in the NI-XNET Hardware and Software Manual
    btw this feature was introduced in NI-XNET 1.7

  • [MFC] Error Importing logs using SCP - "Error while downloading file. The remote host has terminated the connection"

    Background: 
    In order to transfer logs to MFC, we had to use an intermediate logging server in our OOB network.  When this logging server crashed we had to rebuild the server with new hardware and SCP no longer worked.
    Issue: 
    The host key changed on the new server and had to be manually updated.  We suspected it was related to the hosts key but had difficulty finding where the known hosts info was stored.
    Solution: 
    Go to your install location of MFC and remove the known_hosts file.  In our case the file was located at:  "D:\Program Files\IronPort Systems\Mail Flow Central\mailFC\tmp\known_hosts".  Instead of removing the file, we renamed it to known_hosts.old and restarted the MFC service.  Afterwards we could see all the old logs importing.
    The issue itself was not difficult to resolve, it just took more time than expected for something that would seem straightforward.  To complicate things, we even raised a query to customercare who came back saying that they do not support the server on which MFC is running.  But clearly the source of the issue was related to the application rather than the server itself.

    Thanks for your comment qetzacoatl, however I don't this this will work for me, I am on a team, and we need to be able to check-in/out files and make sure we don't override eachothers work. I also don't want to have to use 2 programs to accomplish the task one should be able to do. Its now 3 weeks going and I can't get any work done, it seems like its getting worse. Nobody from Adobe seems to want to comment on my thread at all....So maybe I should just find a completely new solution and get rid of DW all together, Aptana is looking VERY nice right about now.

  • Configure logs Visual Administrator

    Hello all,
    I have a problem related to the size of log files in XI environment.
    I access to transaction al11 in XI environment. Then, I access to the folder /usr/sap/XIP/xxx/j2ee/cluster/server0 and I see that there are a lot of jrfc*.trc files of 0,5 GB of size.
    I would like to know where can I define those files and how to manage them in order to optimize space in servers.
    Thanks in advance.
    Best regards,
    Gemma

    Can you please have a look, which errors are logged in the trace files. If possible, then fix the errors, this will reduce the amount of lines generated. It is possible that somebody activated a rfc trace, this can be done, where the rfc destination is specified. For example SM59, or visual admin -> server0 -> services -> destinations.
    To configure the logging of the files in server0/log have a look at this thread: Re: Log file size in SAP Netweaver
    Visual Administrator Tool -> Server -> KERNEL -> LogManager:
    DefaultTraceFile_Count -> is the number of files
    DefaultTraceFile_Limit -> is the size of the files in bytes
    Be aware, that usually the log files are not overwritten. They are archived in ..log/archive. To turn this off you can do this here:
    Visual Administrator Tool -> Server -> SERVICES-> Log Configurator -> Tab Properties
    Regards, Michael
    Edit: oh, too slow

  • Error when logging into account

    I'm getting an error when trying to log in to my account.
    I had 3 hard drives in my Mac and removed 2 of them and wiped/installed into another computer.
    I still have the hard drive with OSX on it installed, but when I try to log into my account it says there is an error. I'm able to log into the Admin account, but not the one I used regularly.
    I would like to recover some files I had on the desktop. Any way to do this?

    While logged on as Admin, I go to OSX/Applications > Users > Brent > Desktop > Get Info > Permissions for Shared are Read/Write. All selections within the Brent folder have a red circle next to them - If I try to access them, it says the folder can't be opened because I don't have sufficient access privileges.
    [IMG]http://img191.imageshack.us/img191/1039/picture3hs.png[/IMG]
    [IMG]http://img215.imageshack.us/img215/7302/picture4ub.png[/IMG]
    [IMG]http://img405.imageshack.us/img405/2796/picture5oh.png[/IMG]
    [IMG]http://img683.imageshack.us/img683/4117/picture6zd.png[/IMG]

  • Ichat can't connect to my AIM account, gives me the error "Cannot log in to AIM. General error. Try again." Please help!

    ichat can't connect to my AIM account, gives me the error "Cannot log in to AIM. General error. Try again." Please help!

    HI,
    Your specs say OS X 10.6.8 which would be iChat 5.x.x in Snow Leopard.
    This version by default tries to login in to the AIM server called login.oscar.aol.com on port 5190 using the TCP protocol.
    An internet connection is made up of 65535 of these so called ports (more like TV stations)
    Most routers have ports up to port 1024 which means some of the iChat Login Ports are above this.
    Two ways to Solve this.
    1) Change the Login port iChat uses
    2) Change the way the router opens ports.
    For 1) go to iChat Menu > Preferences > Accounts
    Highlight/select the AIM account.
    In the Info Tab deselect the "Enable this Account" to make sure you are Logged out.
    In the Server Settings change the Port to 443
    You can decide not to use SSL as well if you wish  (the server name automatically loses the leading "s")
    For 2) log in to the routers set up pages and make sure it is doing UPnP
    This allows the computers  to tell the router which ports to open. It also allows multiple devices to use the same ports.
    For iChat this allows it to Screen Share as this happens on an unlisted random port.
    Opps  forgot a couple of things.
    If you are using an APple ID registed at Apple ending in @mac.com @me.com or @iCloud.com then the passowrd at Apple has to be 16 characters or less to work with the AIM servers.
    Additionally the iCloud issued @me.com and @iCloud.com one require you to use iChat 6 in Lion or Messages in Mountian Lion due to changes Apple made to the security of letting AIM "read" the passwords.
    9:38 PM      Sunday; June 9, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously
    Message was edited by: Ralph Johns (UK)

  • Remote web access gives critical error on log in

    SBS 2011 Essentials does set up the domain when using the custom domain at remotewebaccess. Now however, when I try to log in on the website it gives me this error: Cannot connect to Remote Web Access. Contact the person who manages the server. Remote
    Web Access is enabled for all accounts, and I have tried to log into several of them but get the same message.
    Jeremiah Doggett

    OK...  time for more information about your setup.
    What router are you using?
    Is there more than one router on the network (including a modem-router if this is a DSL Internet connection)?
    What is the OS of the external computer through which you are trying to access RWA?
    What are the OS(s) of the network computers at the office?
    >>Ok, just created a test user with admin rights, I can still login to mobile site, but on the desktop version I get the same error!
    So, using an external computer (not an IPhone), you can successfully log into RWA but cannot access (remotely control) any workstations on the network?
    Are you getting any certificate errors?
    Is 'Remote Desktop' enabled on each network workstation? 
    And maybe check out this thread:  (turned out to be a permissions issue for the original poster)
    SBS 2011 Essentials: All 'standard users' keep reverting to inactive status in dashboard
    http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/bfc5b55e-9b6b-4705-b0a1-49ddbffbf095/
    Merv  Porter
    ============================

  • ITunes is updated and works fine and I am able to log onto my account. When I go to purchase a song, I get the error message "Your Apple ID has been disabled". I've tried different methods: changing passwords, making a new account with another email addre

    iTunes is updated and works fine and I am able to log onto my account. When I go to purchase a song, I get the error message "Your Apple ID has been disabled". I've tried different methods: changing passwords, making a new account with another email address, and emailing itunes tech support. I am curious as to how many others have been experiencing the same issue. When I googled the error, it seemed like it was happening extremely often with many people.
    We all love their products, but they always come with a lot of issues and horrible customer support.
    My apple Id is [email protected]

    My Iphone 4 is telling me the same thing and I believe I figured out what the problem is.  I had some fraudulent charges on my itunes account, so I call my bank and disputed the charges.  Right after I did that, I started getting the message "Your apple ID has been disabled."  I just realized today that the charges are not fraudulent, they are "in app purchases."  One of my daughters downloaded the game Top Girl which is FREE, but in the game Top Girl you use money in the game to purchase things.  It just so happens that the money you use to purchase things is real money MY Money!!!.  My daughter thought she was using play money in the game and had no idea she was using real money.  She spent $106.00 buying stuff.  Now I have to call the bank and tell them to release the hold and pay Itunes.  I'm hoping this solves the problem.  Here is the link to learn how to disable "in app purchase" on your iphone or ipad.
    http://www.ikidapps.com/2010/12/parents-avoid-accidental-app-purchases-how-to-tu rn-off-in-app-purchasing.html

Maybe you are looking for