Error in lsmw: "Invalid Text ID (Check Table TTXID )

DEAR ALL,
I am uploading purchasing order text in material master by Standard Batch/Direct input method.
In last step Start Direct Input Program it gives error as below.
"Invalid Text ID (Check Table TTXID )"
Please give solution
Regarts
Atul

Hi,
probably you use invalid object ID. All valid object IDs are defined in the table TTXID. For purchase document header it is EKKO and EKPO is for item level.
Cheers

Similar Messages

RFC Connection error - Invalid length. Check parameters.

Hi Forum, Good Morning!
My ABAP Program will run in BACK Ground Job Processing(SM37) to download data to Presentation server( Local PC Directory). So I have created a RFC destination type TCP/IP to use 'RFC_REMOTE_FILE' function module in my ABAP Program.
When I am trying to test RFC connection It is giving following error.
ERROR   Invalid length. Check parameters
LOCATION SAP- Server dsapp05_R3D_10 on host dsapp05 (wp 2)
COMPONENT   CPIC
COUNTER   14
MODULE
LINE
RETURN CODE    240
SUBRC                0
RELEASE           640
TIME                   Mon Dec 11 10:08:05 2006
I did following procedure before I test RFC destination..
I have created RFC Destination : BJRFC
Technical Settings: Selected Registered Server Program radio button
Program ID: BJACCESS
Gateway host : 172.22.149.199
gateway Service: sapdp10
In my local machine Copied SAPRFC.INI file from the TEXT folder to the BIN Folder.
Then open the SAPRFC.INI file in BIN folder and Register a RFC server program at a SAP Gateway.
DEST=R3D_R
TYPE=R
PROGID=BJACCESS.rfcexec
GWHOST=172.22.149.199
GWSERV=sapdp10
RFC_TRACE=0
DEST=R3D_R
TYPE=R
PROGID=BJACCESS.trfcexec
GWHOST=172.22.149.199
GWSERV=sapdp10
RFC_TRACE=0
Then entered below command in dos prompt.
C:\Program Files\SAP\FrontEnd\SAPgui\rfcsdk\bin>rfcexec -aBJACCESS 172.22.149.199 xsapdp10.
so how do i proceed in this kind of case.
any help please.
Thanks in advance.

Hi,
   Just you check whether your program is registered or not.
   If it is registered then you can find in SMGW transaction and go to
   GOTO - Logged on clients
in that you will be able to see your program name if it registers succesfully.
you have typed rfcexec -aBJACCESS 172.22.149.199 xsapdp10
in this way.
In this you have misseg 'g' in front of your sap ip.
Thanks&Regards
Rajehs Balusu

"Invalid text value" error when calling a web service from a workflow in SharePoint Online

I'm trying to create a workflow that loops through a list in SharePoint Online using a REST web service call. However, I'm having
some trouble trying to pass the authentication token as described in the following article.
http://www.fabiangwilliams.com/2013/09/03/more-on-sharepoint-2013-r...
Basically, the workflow stops right at the "Call web service" action, and the only error it tells me is the following.
Invalid text value.
A text field contains invalid data. Please check the value and try again
Has anyone had success with web service calls to SharePoint Online?
Dan Kreitz, Solutions Architect, Séafra Inc.

Hi DanPoint,
Thank you for your sharing!
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

[CS2-JS] Error when inserting some text in table cell via XMLElement

I have a very very strange InDesign behaviour when using XMLElement in a table Cell to insert a string.
For example (in a table that has an XML structure) :
var cell = table.cells[0];
var cell_xe = cell.associatedXMLElement;
var newtag_xe = cell_xe.xmlElements.add("mytag", null);
// Up to now, no problem
// Then I use only one of these following instructions at a time :
newtag_xe.contents = "existe en 4,57 x 1,07 m"; // Gives an InDesign error "Object is invalid"
newtag_xe.contents = "existe en 4,57 x 1,07 "; // Works fine
I have a lot of other examples of that kind (not only failing on the last character). InDesign accepts (randomly, it seems) some strings and rejects some others, and no logical rule seems to emerge.
Anyone with the same problem ?

Hi Cyril,
re: "This is where I think InDesign is really not fair : myTextFrame.tables.length == 0 if the table cannot be seen because of vertical overflow !!!"
I disagree. If the table does not appear in the text frame, then it shouldn't be in the text frame object. If the table appeared as a child of the text frame when it does nto appear in the frame (when it might have moved to another text frame in the story), it would be even more confusing.
This points out the danger of relying on the text frame as the container--instead, use the parent story of the text frame, which will contain all of the text in the story, regardless of whether it's visible or not.
Thanks,
Ole

Two Mail Error Msgs: Message Can't Be Saved/Drafts & Invalid Text Encoding

My Mail was working fine until just recently. Now when I am replying or composing emails, out of the blue, in the middle of typing my message, I will get this error message first: "This message can't be saved to the Drafts mailbox."
After closing that error box which had nothing to do with my typing, I will then get this second error message: "Invalid Text Encoding....converted to the "Japanese (Shift JIS)" text encoding...."
I then close that message and try to finish typing my message. I've checked to see that my text encoding is set where it belongs, and it is never set to Japanese. Does anybody know what is going on here? Any help will be much appreciated. Thank you, Diane

The following test might be helpful in deciding what to try next: Create a New User Account, and as that New User try to set up one account -- since you have a POP set to leave messages on the server after download. If not familiar with setting up a New User Account, see:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
This will be a useful test to now check this behavior in another User Account, and of course is not meant to suggest a permanent switch to the New User Account, but rather a test of the Mail application outside of your normal User Account and its existing setup data.
Ernie

Invalid text value. A text field contains invalid data. Check the value and try again

Hello,
I am having a problem with the error mentioned in the title. I see alot of others have experienced the same problem, but I have quite a twist to it.
I see the problem when I try to edit a list item, and then try to save the changes.
Here what I see in the ULS log:
System.Runtime.InteropServices.COMException: Invalid text value. A text field contains invalid data. Check the value and try again
at Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId,
Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bMigration, Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter
pListDataValidationCallback, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback)
at Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean
bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bMigration, Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback,
ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback)
I have 3 front end servers(fx wfe1, wfe2, wfe3). And here is the twist.
If I access the library directly through wfe1 and wfe2, I get the error. If I access the library via wfe3 if works just fine.
So because of this, I think it is safe to assume that is has nothing to do with the character limit of 255. Nor does it have anything to do with the field type, since it is already set to mulitible lines of text.
So. Any ideas?
Regards,
Michael
mic

Check if there is any change in web.config of these servers
http://support.microsoft.com/kb/2880758
To work around this issue, limit the length of the personal message in the invitation to 256 characters or less.
This is a known issue. Microsoft is working to resolve this issue.
http://social.msdn.microsoft.com/Forums/en-US/7bb16e51-e7cc-439e-a8b3-755683ccac1a/max-length-on-custom-field-types
To solve the problem you may have to change the field's parent type to "note". To do that you have to open your fldtypes... file under Templates/xml and change the line to:
"<Field Name="ParentType">Note</Field>" from "<Field Name="ParentType">Text</Field>"
You might also have to add a sql type if your text needs to be longer than 255 characters
<Field Name=”SQLType”>ntext</Field>
and inherit from SPFieldMultiLineText instead of SPFieldText
If this helped you resolve your issue, please mark it Answered

Files moving to NFS error folder - Could not insert message into duplicate check table

Hi Friends
Have anyone faced this error, could suggest me why.
The CSV Files failed on Sender Channel and moves to NFS error path and in the log it says as below.
Error: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not insert message into duplicate check table. Reason: com.ibm.db2.jcc.am.SqlTransactionRollbackException: DB2 SQL Error

Hi Uma - is that a duplicate file? have you enabled duplicate file check in sender channel?
please check if the below note is applicable
1979353 - Recurring TxRollbackException with MODE_STORE_ON_ERROR stage configuration

Error While Doing GR "Check table YMSEG:"

I am getting following error while doing GR for sales set article 303387.
Check table YMSEG: entry 303384 0001 does not exist
Sales set header 303387
sales set Component 303384 & 303386.
can't find any issue with the article (material) setup

YMSEG is a standard internal table used in import and export of function modules.
if you search SAP notes on YMSEG then you get about 230 hits.
Unfortunately the info given is by far not enough to tell you the reason for this error.
The number from the error explains just that it is one of the sales set Components
But you need to describe the process and what changes you eventually did compared to standard process. Only then we might be able to help you further.

Error "Check Table TFBEFU_CR : entry 10 does not exist" getting

Hi All ,
While doing Goods Receipt for Prodn Order , error "Check Table TFBEFU_CR : entry 10 does not exist" getting Prompted.
Could u pls help me to solve it
Regards
Sandeep

you need to apply the OSS note 107588. it is excatly for the same problem yoy mentioned here.
check the note

Error during Goods Receipt:Check table XMCHB: Entry 'Material no.', 'Plant

Dear All,
I am trying to post Goods Receipt for a Stock Transport Order.
The error message appears as " Check table XMCHB: entry 'material no.' 'plant', '____' , 'batch no.' does not exist. (message no. M7001)
The Supplying plant stock from which Goods Issue is done, is a Normal storage location Unrestricted stock.
The receipt has to be taken into Vendor stock (Goods Receipt movement type 101 O )
Inputs will be appreciated.

technically spoken.
table MCHB is the storage location segment of a batch record.
System tries to create an entry in MCHB without a storage location, which does not make sense.
Vendor stock does not go to MCHB, instead it is recorded in table MKOL.
If you do STOs then you may transfer vendor consignment stock, but you cannote issue own stock and receive into vendor consignment stock.

QM UD Error Message: Check table XEKBN: entry 45039875220001003 does not exist.

Hello QM expert,
I encounter a error when I make a UD. (Please refer to below screenshot. )
Case 1: I did quantity post to unrestricted use, to scrap, to blocked stock, to new material, to reserves, return delivery. When I save this UD, there is a error message 'Check table XEKBN: entry 4503987522000100310100 does not exist.' (PS. 4503987522 is PO number, but I don't know what it is about 10031010.)
Case 2: I fill the same field like Case 1, but exclude to new material. It can be passed, no error message.
Case 3: I only fill one field [to new material. It can be passed, no error message.
Could you please give me some guidance? Thank you so much.
Best Regards,
Fanchao Bu

Hi Fanchao,
Form the inspection lot number range, I believe you are using GR form Purchase Order, right? Please confirm the below points -
1. Is this a normal PO or Sub-contractor's PO? Please confirm if this issue is happening for every stock posting like Unrestricted, Scrap, Blocked...? or just for one? Can you try one by one for example, move stock form QI => Unrestricted stock only (and do not combine all types together like the attached screenshot) and suggest if that is working.
2. If this is a non-valuated material you have used (NLAG) for testing? Are you trying to post materials for previous period? Storage Location SM10 is valid?
If still this issue exist, then potentially, there is some issue with valuation variant linked to valuation area, which is normally maintained in Configuration OPK9. Paralelly, you can request your ABAP team to check FM MB_UPDATE_VALUE_ENQUEUE_TABLE, Include LMBGBU04, as suggested by the below link -
SAP ABAP Function Module MB_UPDATE_VALUE_ENQUEUE_TABLE - SAP Datasheet - The Best Run SAP Run SAPDatasheet
You can also check SAP notes below, based on the business needs:
1. 403671 - Error M7001: 'Please check table &...'
    401462 - Error M7001: 'Please check table &...'
    201833 - M7001: 'Please check table XEKPO: Entry & &...'
    2072019 - Error M7001 raised during posting goods receipt
    407265 - Transfer parameter with BAPI BAPI_GOODSMVT_CANCEL (this may be linked to your return Delivery of 1 PC...)
    439945 - GR w/ freight costs for stock transport ordr w/ML currencies
    521090 - FAQ: Stock transfer to stock transport order
    867878 - Inconsistencies in the EKBE table because of conversions
    214814 - M7001/M7361: Table T156M, entry MAA7 2
    1584493 - Overdelivery check for GR blocked stock with GR-based IV
    102863 - GI f.delivery f.a stock transfer w.delivery costs
2. 409529 - Price differences during goods receipt for purchase order
3. 1528009 - MAA: incorrect distribution of goods receipt quantities
4. 1569831 - MAA2: Composite SAP Note after Support Package SAPKH60504
5. 406973 - M7001: Please check table XEBEFU: Entry does not exist
6. 70577 - QA11: Error M7001 when posting qty in usage decision (OLD NOTE, May not be applicable)
7. 824322 - QAC1: Incorrect batch in material document (Old Note, may no be applicable)
Else, you can speak to MM team and/or FI team to help you better in this case, as I feel there is no much QM issues involved.
Thanks,
Arijit

Insert into table error - ora-01722 invalid number

Need some assistance with inserting data into a table. The date column keeps on failing to insert.
here is my insert statement
insert into tab_mod_history (TABLE_OWNER, TABLE_NAME, PARTITION_NAME, SUBPARTITION_NAME, INSERTS, UPDATES, DELETES, TIMESTAMP, TRUNCATED)
values ('$i_owner','$i_table','$i_part_name','$i_subpart_name','$i_ins','$i_upd','$i_del','$time','$trunc');Script loads data for partition tables, but not normal tables with the timestamp column
I select the data using this select statement:
select table_owner, table_name, partition_name, subpartition_name, inserts, updates, deletes, timestamp, truncated
from dba_tab_modifications
where table_owner in ('scott','MAC')
order by table_name;

ok here are the errors:
values ('MAC','WC_MST','11','1','1','12/04/2011','NO','','')
ERROR at line 2:
ORA-01722: invalid number
Session altered.
values ('MAC','WF_05A','208','128','208','18/02/2011','NO','','')
ERROR at line 2:
ORA-01722: invalid numberHere is the table structure
SQL> desc tab_mod_history
Name                                      Null?    Type
TABLE_OWNER                                        VARCHAR2(30)
TABLE_NAME                                         VARCHAR2(30)
PARTITION_NAME                                     VARCHAR2(30)
SUBPARTITION_NAME                                  VARCHAR2(30)
INSERTS                                            NUMBER
UPDATES                                            NUMBER
DELETES                                            NUMBER
TIMESTAMP                                          DATE
TRUNCATED                                          VARCHAR2(3)
DROP_SEGMENTS                                      NUMBERI used the column names to create the variables..that is why $time was used.
How else could I have done it????
thought this was easy..but to my dismay...

Unable to post in MI07 for sales order stock - Error Check Table XMSSA

Hi,
When I try to post in MI07, I get the following error Unable to post - Error 'Check Table XMSSA
Unable to post - Error 'Check Table XMSSA: entry 0000000000010011000 CA01 E 1500004153 000010 does not exist
It has something to do with sales order stock. But I am not sure what is causing the issue.
SAP error details:
Check table XMSSA: entry 000000000010011000 CA01 E 1500004152 000010 does not exist
Message no. M7001
Diagnosis
In table XMSSA the entry 000000000010011000 CA01 E 1500004152 000010 is missing.
Procedure
Make sure your entries are correct.
If table has not been maintained correctly, please inform your systems administrator.
Any ideas?

Hi Guys ,
I have faced this same issue . Found OSS note 1360365 . The issue is resolved after implementing this note .
Regards
Rajmohan G

In MB1C im getting error-"Check table T004F: entry G006 does not exist"

DEAR SIR,
WHILE DOING MB1C IN MOVEMENT TYPE 561 I M GETTING THI ERROR -Check table T004F: entry G006 does not exist.
PLZ HELP ME HOW TO SOLVE THIS PROBLEM.
THXS AND REGARDS,
DEBESH TRIPATHY

Check these threads
[Check table T004f: Entry G006 Does not exist |Check table T004f: Entry G006 Does not exist]
[Posting Material |Re: Posting Material]
[Error in MBIC|Error in MBIC]
thanks
G. Lakshmipathi

I just updated my 3gs to the latest iOS 5 update and now I am unable to text certain numbers. I keep getting the error code 1121611611 invalid number, even though the number I have in my contacts is a 10 digit number. Any suggestions on fixing this?

I just updated my 3gs to the latest iOS 5 update and now I am unable to text certain numbers. I keep getting the error code 1121611611 invalid number, even though the number I have in my contacts is a 10 digit number. Any suggestions on fixing this?

PhotogYogi wrote:
I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it.

Error in lsmw: "Invalid Text ID (Check Table TTXID )

Similar Messages

Maybe you are looking for