Error in Mapping (Details: transaction SMW01)

Hi,
I am tring to replicate materials to SRM.
I ran the transaction R3AS and given the load object as MATERIAL.
When i checked in SMQ2 i found an error.
The error is as follows.
"Error in Mapping (Details: transaction SMW01)"
Kindly help me in resolving this issue.
Feel free to contact me on +919886157678
Thanks and Regards,
Satish

As Jorge said check transaction SMW01.
Probably you'll see that some material group is missing, so you'll have to adapt your filters for that and replicate the material group (DNL_CUST_PROD1) using R3AS.
Regards,
Robin

Similar Messages

Error in Mapping - Transaction R3AS

HI,
We have problems with replicate of materials. We have done for DNL_CUST_PROD0 and DNS_CUST_PROD1, but for object name MATERIAL doesn't work. The system shows the message SYSFAIL in Queue and the detail is "Error in Mapping". We have verified the Notes and those are OK.
We really need some help for replicating materials.
By the way, our version is SRM 7.0.
Hope to hear from you soon.
Thanks in advance.
Glauco

HI,
We have checked the product categories and material groups, both are OK. Besides, We put the filter for one specific material and didn't work as well.
The last question I think it important for your help.
CRMPRLS: No entries.
COMMPR01: No data.
But when debugging, program SMOF0_INIT_DNL_START, also this table SMOFRELTAB doens't have entries with field OBJNAME = 'MARA', etc.... Is it relevant ?
Thanks in advance.
Glauco
Edited by: Glauco Kubrusly on Apr 7, 2011 7:25 PM

Middleware errors from transaction smw01 in worklist

Hi,
for all users the MW errors (transaction smw01) can be seen in the worklist as workflow items (7.0 SP4).
Does anybody know how and where to deactivate these settings?
Thanks & Regards,
Wolfhard

Hi,
thank you for this hint!
But I cannot identify any setting there which could be the reason for the workflow items related to the MW errors.
There are only some "historical" mail settings for some users as this system is a copy of the productive system.
Regards,
Wolfhard

Error during mapping service, RFC-XI-File Adapter

Hello,
I have the following problem: I am using RFC to send some data to XI and then to File Adapter, however I get a short dump with "5990 Error during mapping service in XI". Even though mappings works, I tested using the document that comes in XI in Repository without any errors.
       What does this error means and is there any way to get more detailed explanation of my error. Thank you in advance for your help,
               Dmitriy Mindich

Synchronous RFC
1. CALL FUNCTION func DESTINATION dest
                     parameter_list.
Asynchronous RFC
2. CALL FUNCTION func STARTING NEW TASK task
                [DESTINATION {dest|{IN GROUP {group|DEFAULT}}}]
                parameter_list
                [{PERFORMING subr}|{CALLING meth} ON END OF TASK].
Transactional RFC
3. CALL FUNCTION func IN BACKGROUND TASK
                     [DESTINATION dest]
                     parameter_list
                     [AS SEPARATE UNIT].
Use help function of your ABAP editor for more details.
Regards
Stefan

VLD-1141: Internal error during mapping generation.

I am getting the "VLD-1141: Internal error during mapping generation" error when deploying a mapping. This mapping was previously working fine. As part of a re-factoring effort, for all the underlying tables and views, we replace 2 existing columns with a new column. All the objects were successfully re-imported and synchronized in the mapping. The mapping is using Mapping Input Parameter, Lookups, Expression Transformations, Splitter, Set Operator, Source & Target Tables. All these transformation were part of the earlier working version of the mapping.
On doing validation within the mapping, I get a success message followed by 4 warning for the Lookup Condition on key Lookup does not contain a complete unique key. Before the re-factoring effort, I was getting the same 4 warning messages, however the mapping was executing correctly.
When I do Generate within the mapping, I get the following message:
Code cannot be generated.
Click the message tab for details.
In the Design Center, when I do a validation on the mapping I get the following error:
VLD-1141: Internal error during mapping generation.
java.lang.NullPointerException
at oracle.wh.service.impl.mapping.component.Sequence.getSequenceExpressions(Sequence.java:138)
at oracle.wh.service.impl.mapping.component.Sequence.doSequenceValidation(Sequence.java:239)
at oracle.wh.service.impl.mapping.component.entity.EntitySqlDelegate.prepareOutputContext2(EntitySqlDelegate.java:123)
at oracle.wh.service.impl.mapping.component.entity.EntitySqlDelegate.prepareOutputContext2(EntitySqlDelegate.java:97)
at oracle.wh.service.impl.mapping.component.entity.EntitySqlDelegate.prepareOutputContext(EntitySqlDelegate.java:78)
at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:240)
at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assembleSetBasedInternal(PlSqlGenerationMediator.java:2108)
at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assembleSetBased(PlSqlGenerationMediator.java:2090)
at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assemble(PlSqlGenerationMediator.java:541)
at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:798)
at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:335)
at oracle.wh.service.impl.mapping.generation.WBDeployableMappingGenerator.generate(WBDeployableMappingGenerator.java:102)
at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:433)
at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:311)
at oracle.wh.service.impl.generation.service.WhValidationGenerationTransaction.run(WhValidationGenerationTransaction.java:251)
Any help in this regards would be appreciated.
Naval

Hi,
I think your mapping is corrupted by converting two columns to one. The owb has always a problem if you change the structure of a table which is bound to a table operator. The way to avoid this is to drop the table operator after changing the table in the table editor and recreate it with the changed table definition.
Make a test: select the new attribut in the table operator and look left on the configuration window. To which table and attribute it's bound?
Regards,
Detlef

Error during Mapping

Hello,
My XI 2.0 scenario :
Flat file => File adapter => XI => IDoc adapter => SAP 4.7
The File adapter reads the file successfully & passes to the Integration Server. In XI XML message monitor (SXMB_MONI), I'm getting the following error ...
====================
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
<SAP:Context />
<SAP:Code p1="Error during mapping" p2="--- Creating Java mapping com.sap.xi.tf._R_MsgMap_1_ --- Using MappingResolver with context URL /sapmnt/XID/global/xi/mapping/http%3A%2F%2FABCXYZ%2Ecom%2Fxi%2FDev%2F/bc52cef0be3411d8b277cade640701c6/ --- Load of com/sap/xi/tf/_MsgMap_1_.class from /sapmnt/XID/global/xi/mapping/http%3A%2F%2FABCXYZ%2Ecom%2Fxi%2FDev%2F/bc52cef0be3411d8b277cade640701c6/ failed. --- Class not found: com.sap.xi.tf._MsgMap_1_ --- java.lang.ClassNotFoundException at RUMappingJava.load(): Could not load class: com.sap.xi.tf._MsgMap_1_ Class not found: com.sap.xi.tf._MsgMap_1_ --- com.sap.aii.ibrun.server.map.MappingRuntimeException: at com.sap.aii.ibrun.server.map.MappingRuntimeException.code_STYLESHEET_OR_CLASS_NOT_FOUND(MappingRuntimeException.java:91) at com.sap.aii.ibrun.server.map.RUMappingJava.load(RUMappingJava.java:119) at com.sap.aii.ibrun.server.map.RUMappingJava.execute(RUMappingJava.java:40) at com.sap.aii.ibrun.server.map.RURunner.run(RURunner.java:58) at com.sap.aii.ibrun.server.map.RUManager.run(RUManager.java:66) at com.sap.aii.ibrun.sbeans.map.MappingRequestHandler.handleRequest(MappingRequestHandler.java:62) at com.sap.aii.ibrun.sbeans.map.MappingServiceImpl.processFunction(MappingServiceImpl.java:72) at com.sap.aii.ibrun.sbeans.map.XMappingServiceObjectImpl0.processFunction(XMappingServiceObjectImpl0.java:24) at com.sap.aii.ibrun.sbeans.map.MappingServiceKey.processFunction(MappingServiceKey.java:10) at java.lang.reflect.Method.invoke(Native Method) at com.inqmy.services.rfcengine.RFCDefaultRequestHandler.invokeBean(RFCDefaultRequestHandler.java:73) at com.inqmy.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:47) at com.inqmy.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:69) at com.sap.mw.jco.JCO$Server.dispatchRequest(Unknown Source) at com.sap.mw.jco.rfc.MiddlewareRFC$Server.nativeListen(Native Method) at com.sap.mw.jco.rfc.MiddlewareRFC$Server.listen(Unknown Source) at com.sap.mw.jco.JCO$Server.listen(Unknown Source) at com.sap.mw.jco.JCO$Server.run(Unknown Source) at java.lang.Thread.run(Thread.java:479) ---" p3="" p4="">MAPPING.GENERIC</SAP:Code>
<SAP:Text language="EN">Error during mapping</SAP:Text>
</SAP:ErrorHeader>
====================
MsgMap_1 is the Message Mapping defined - mapping the flat file structure to the IDoc structure.
Do I have to do more than just create the Message Mapping in the Integration Repository ? In the Integration Directory, the Interface Mapping (from Repository) is used.
Any help is greatly appreciated.
Regards,
Homiar.

Hi Homiar,
Need a little more detail.
The directory points to the interface mapping.
The Interface mapping points to the message mapping.
What type of message mapping are you using?
- Graphical mapping.
- XSLT.
- Java.
- Abap.
The main problem is "java.lang.ClassNotFoundException"
Do other mappings work in your system?
Jason

System gives error msg "balance in transaction currency"

Hi,
when we run t-code VF02 ,after giving billing document number , when we select release to accounting system gives following error message
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 112.36-' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application
Request immediate help.

See the following OSS notes:
662011
480907
551898
611094
Hope they can help
Siva

Error occurs when loading transaction data from other model

Hello Experts, I am trying to validate my transformation file and I can see peculiar behaviour of the transformation file. Even though the transformation file is not complete/ complete with all the mappings, i am getting the same error as above.
I can see options, mapping and conversion sections are validating successfully and throwing the above error.
Incomplete Transformation File
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT= 10
ROUNDAMOUNT=
*MAPPING
CUSTOMER = *NEWCOL (NO_CUST)
Validating the transformation files
Validating options...
Validation of options was successful.
Validating mappings...
Validation of mappings was successful.
Validating conversions...
Validation of the conversion was successful
Creating the transformation xml file. Please wait...
Transformation xml file has been saved successfully.
Begin validate transformation file with data file...
[Start test transformation file]
Validate has successfully completed
ValidateRecords = YES
Error occurs when loading transaction data from other model
Validation with data file failed
I am getting the same error with complete transformation file also. Please let me know where I am doing the mistake or is it a system error?
Thanking you
Praveen

Hi,
By
*MAPPING
CUSTOMER = *NEWCOL (NO_CUST)
you want CUSTOMER to receive a fixed string "NO_CUST"?
If so use,
*MAPPING
CUSTOMER = *STR (NO_CUST)

Error occurs when loading transaction data from other cube

Hi Gurus,
I'm currently working on a Transformation File for loading Transactional Data from BW to BPC but a error message is displayed "Error occurs when loading transaction data from other cube". I have already checked permissions for my user, double checked my transformation file and the dimensions, made all conversion files needed and the message has not changed.
Can anybody help me to solve this problem?!
Thanks a lot & Best Regards,
HH

Hi,
Here, the Transformation File & Conversion File. I have already tested both with another different InfoCube and they work but no for the one needed.
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
*MAPPING
Category=*NEWCOL(ACTUAL)
P_0BASE_UOM=0BASE_UOM
P_0BUS_AREA=0BUS_AREA
P_0COSTCENTER=0COSTCENTER
P_0FUNDS_CTR=*NEWCOL(null)
P_0GL_ACCOUNT=0ACCOUNT
P_0LOC_CURRCY=*NEWCOL(MXN)
P_0MATL_TYPE=*NEWCOL(null)
P_0VENDOR=0VENDOR
P_DataSrc=*NEWCOL(UPLOAD)
P_ZMATERIAL1=0MATERIAL
P_ZMATERIAL2=*NEWCOL(null)
P_ZMATL_CLASS=*NEWCOL(null)
P_ZMATL_TESP=*NEWCOL(null)
P_ZRATIO=*NEWCOL(KF_inpmdInt)
Time=0CALMONTH
SIGNEDDATA=0TOTALSTCK
*CONVERSION
Time=Time_conv.xls
EXTERNAL     INTERNAL
201101          2011.JAN
201102          2011.FEB
201103          2011.MAR
201104          2011.APR
201105          2011.MAY
201106          2011.JUN
201107          2011.JUL
201108          2011.AUG
201109          2011.SEP
201110          2011.OCT
201111          2011.NOV
201112          2011.DEC
Thank you for taking at glance to the files.
Best Regards,
HH

Display error messages in Call transaction

Hi Gurus,
I have donme BDC using call transaction..can anybody help me in displaying the error messages in call transaction..
A detailed code wud be very much helpful..
full marks wud given
regards
Sahil

hi check this,
PERFORM Z11_BDC_VA02.
      ELSE.
        MESSAGE I013 WITH TEXT-013.
      ENDIF.
ELSE.
          CLEAR V_FLAG.
       MESSAGE E012 WITH TEXT-012.
ENDIF.
FORM z11_bdc_va02 .
*COVER 1
perform bdc_dynpro      using 'SAPMV45A' '0102'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBAK-VBELN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'VBAK-VBELN'
                              wa_head_detail-vbeln.
*COVER 2
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '=T\03'.
perform bdc_field       using 'BDC_CURSOR'
                              'RV45A-MABNR(01)'.
*COVER 3
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ITNE'.
perform bdc_field       using 'BDC_CURSOR'
                              'RV45A-MABNR(01)'.
*COVER 4
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SICH'.
perform bdc_field       using 'BDC_CURSOR'
                              'RV45A-KWMENG'.
perform bdc_field       using 'VBAP-MATNR'
                              wa_head_detail-matnr.
perform bdc_field       using 'RV45A-KWMENG'
                              v_kwmeng.
perform bdc_field       using 'VBAP-VRKME'
                              wa_head_detail-meins.
*COVER 5
perform bdc_dynpro      using 'SAPLSPO2' '0101'.
perform bdc_field       using 'BDC_OKCODE'
                             '=OPT1'.
call transaction 'VA02' using it_tab1 mode 'A' UPDATE 'S' MESSAGES INTO
IT_TAB_ERROR.
"CAlling transaction with all screen
Loop at it_tab_error.
if it_tab_ERROR-MSGTYP = 'E' .
clear v_flag.
message I014 with TEXT-014.
else.
clear v_flag.
message I019 with TEXT-019.
endif.
endloop.
refresh it_tab1.
clear V_KWMENG.
ENDFORM.                    " z11_bdc_va02
Reward if helpful,
Gaurav J.
Edited by: GAURAV on Feb 4, 2008 9:10 AM

Error 'Could not commit transaction'

Dear Expert,
I am facing error ' Could not commit transaction' while entering Good Receipt PO . All GL account mapped.

Hi,
Please check for the Approval procedures and see if the user for which
you are getting error is defined the originator for the affected
documents.
You can check this by going through all the Approval template for that
particular document.
Then check the Terms tab of that template and if in Launch Approval
Procedure "When the following applies" is ticked then check the "Ratio"
column and "Value" column and make sure that some value is given there.
There should not be any undefined type.
If there is any Template which has undefined type selected then please
logged in as the Authoriser or Approver of that template and modify
that term.
Check all the approval template and go through the term tab and see the
value defined there.
Hope this will help.
Regards,
Gagan Thareja
SAP Business One Forums Team

Hidden "saving error" that send "Succesfully Transaction" message

Hidden "saving error" that send "Successfully Transaction" message
I wanted to make an n-level nesting solution. With just one Service file that would be manually edited at the end.
First I made n Master-detail tabs. The Master of the i+1 tab was the detail of the i tab. I tested separately. Every one of them and they inserted, updated an so on very well..(of course!!)
After I replaced on the MVC File every GetDataSource with getChildDataSource. I included the aditional parameter required by the getChildDataSource, i mean de Master datasources reference and the infotable Master key.I made the same with the Save.
This didn't work in an strange way. After I made a saving test the browser screen show a "Success" message but the database haven saved the new record.... Why if the transaction is not successfully I receive the success message? I tested fort apart (using the BC4J app Module "test" and the records was updated correctly..of course without the Master Detail stuff..)
Am I missing another postgeneration task.. At least may I to generate some error in order to start the investigation about what am I doing wrong??.

Have a look at the sample PL/SQL TCP code I posted (using the POP3 protocol) in [url http://forums.oracle.com/forums/thread.jspa?messageID=2018101#2018101]this thread.
Pay particular attention on how the loop, receiving socket data, is constructed.
In future, please always include:
- exact error details (we have no idea what error you are running into)
- Oracle version (full version details down to the very last digit)

Update statements encounterd Errors OGG-01168 & SQL error 1403 mapping

Hi Expetrs,
Update statements throwing below error:
2012-11-07 10:40:11 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rep1.prm: No unique key is defined for table AAAA. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
2012-11-07 10:40:12 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rep1.prm: No unique key is defined for table AAAA. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
2012-11-07 10:40:15 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rep1.prm: No unique key is defined for table BBBB. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
2012-11-07 10:40:15 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rep1.prm: No unique key is defined for table BBBB. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
2012-11-07 10:40:16 WARNING OGG-01004 Oracle GoldenGate Delivery for Oracle, rep1.prm: Aborted grouped transaction on 'abc.BBBB', Database error 100 (retrieving bind info for query).
2012-11-07 10:40:16 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rep1.prm: Repositioning to rba 17466 in seqno 1384.
2012-11-07 10:40:16 WARNING OGG-01154 Oracle GoldenGate Delivery for Oracle, rep1.prm: SQL error 1403 mapping abc.BBBB to abc.BBBB.
2012-11-07 10:40:16 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rep1.prm: Repositioning to rba 20104 in seqno 1384.
2012-11-07 10:40:16 ERROR   OGG-01296 Oracle GoldenGate Delivery for Oracle, rep1.prm: Error mapping from abc.BBBB to abc.BBBB.
2012-11-07 10:40:16 ERROR   OGG-01668 Oracle GoldenGate Delivery for Oracle, rep1.prm: PROCESS ABENDING.If I use KEYCOLS:
--extract file:
TABLE abc.INDIA , KEYCOLS (ID);--replicat parameter file
MAP abc.INDIA, TARGET abc.INDIA , KEYCOLS (ID);Encountered below error
2012-11-09 00:37:54 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rep1.prm: No unique key is defined for table INDIA. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
2012-11-09 00:48:34 ERROR   OGG-01168 Oracle GoldenGate Delivery for Oracle, rep1.prm: Encountered an update for target table abc.INDIA, which has no unique key defined. KEYCOLS can be used to define a key. Use ALLOWNOOPUPDATES to process the update without applying it to the target database. Use APPLYNOOPUPDATES to force the update to be applied using all columns in both the SET and WHERE clause.
2012-11-09 00:48:34 ERROR   OGG-01668 Oracle GoldenGate Delivery for Oracle, rep1.prm: PROCESS ABENDING.any clues plz ??
Regards,
Edited by: user13403707 on 19 Nov, 2012 10:55 PM

If you know of any columns that can be used to identify the records you want to replicat changes to at the target table, use them as KEYCOLS.
Then add supplemental logging using those columns as
ADD TRANDATA owner.table_name, COLS (col1, col2).
If you can't think of any such columns, just do
ADD TRANDATA owner.table_name;
It will add supplemental logging with the below warning
2012-11-19 09:59:13 WARNING OGG-00869 No unique key is defined for table table_name. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
Logging of supplemental redo data enabled for table owner.table_name.

Error while comitting a transaction in oSB. The following is the error stack

Error while comitting a transaction in OSB. The following is the error stack
<Apr 20, 2015 12:00:15 AM MDT> <Error> <EJB> <BEA-010026> <Exception occurred during commit of transaction Xid=BEA1-1AE41F1CAE45F2B146FD(296700848),Status=Rolled back. [Reason=Unknown],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=2,seconds left=120,XAServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(ServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(state=new,assigned=none),xar=null,re-Registered = false),XAServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(ServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(state=rolledback,assigned=OSB_MS1),xar=WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_11603460297,re-Registered = false),XAServerResourceInfo[weblogic.jdbc.jta.DataSource]=(ServerResourceInfo[weblogic.jdbc.jta.DataSource]=(state=ended,assigned=none),xar=CMSDS,re-Registered = false),SCInfo[OSB_PRDKS_DOMAIN+OSB_MS1]=(state=rolledback),SCInfo[SOA_PRDKS_DOMAIN+SOA_MS2]=(state=pre-prepared),properties=({}),local properties=({weblogic.jdbc.jta.CMSDS=[ No XAConnection is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=OSB_MS1+soaprd-vip-osb-ms1.cos.is.keysight.com:8001+OSB_PRDKS_DOMAIN+t3+, XAResources={eis/wls/Queue, WEDB_EVEREST_OSB_PRDKS_DOMAIN, XREFDS_OSB_PRDKS_DOMAIN, eis/activemq/Queue, CustomSchemaDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS1_OSB_PRDKS_DOMAIN, eis/tibjmsDirect/Queue, eis/jbossmq/Queue, eis/Apps/Apps, MobileApps_AOS_MDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_DRDS_OSB_PRDKS_DOMAIN, WSATGatewayRM_OSB_MS1_OSB_PRDKS_DOMAIN, eis/webspheremq/Queue, eis/AQ/aqSample, SBLPROD_OSB_PRDKS_DOMAIN, wlsbjmsrpDataSource_OSB_PRDKS_DOMAIN, eis/aqjms/Queue, CMSDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_WseeFileStore_auto_1, FAP_OSB_PRDKS_DOMAIN, eis/sunmq/Queue, eis/pramati/Queue, FMWAPPDS_OSB_PRDKS_DOMAIN, weblogic.jdbc.jta.DataSource, GSDC_OSB_PRDKS_DOMAIN, eis/tibjms/Topic, eis/fioranomq/Topic, WLStore_OSB_PRDKS_DOMAIN_FileStore_MS1, PresidioOracleAppsDS_OSB_PRDKS_DOMAIN, GSDCDS_OSB_PRDKS_DOMAIN, eis/aqjms/Topic, CustOutDS_OSB_PRDKS_DOMAIN, OFMW/Logging/BAM, MobileAppsDS_OSB_PRDKS_DOMAIN, FIDDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN__WLS_OSB_MS1, HRMSDS_OSB_PRDKS_DOMAIN, WEDB_OSB_PRDKS_DOMAIN, OracleAppsDS_OSB_PRDKS_DOMAIN, eis/wls/Topic, eis/tibjms/Queue, eis/tibjmsDirect/Topic, IntrastatDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_COSDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS2_OSB_PRDKS_DOMAIN, EVEREST_WEDB_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1, Everest_OSB_PRDKS_DOMAIN},NonXAResources={})],CoordinatorURL=SOA_MS2+soaprd-vip-soa-ms2.cos.is.keysight.com:8002+SOA_PRDKS_DOMAIN+t3+): javax.transaction.SystemException: Lost connection to server while commit was in progress, ignoring because initiating server is not coordinating server. Remote Exception received=weblogic.rjvm.PeerGoneException: ; nested exception is:
        java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
        java.io.InvalidClassException: oracle.jdbc.xa.OracleXAException; local class incompatible: stream classdesc serialVersionUID = -2542408691177300269, local class serialVersionUID = -4551795881821760665
        at weblogic.transaction.internal.TransactionImpl.commit(TransactionImpl.java:376)
        at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:237)
        at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:224)
        at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:552)
        at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:423)
        at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:325)
        at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
        at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
        at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
        at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
        at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Hi,
Have you tried Cancelling the release before adding the version?
Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
Please let me know if it worked!
Vijay

Getting Error while saving a transaction without making any changes to it.

Hi All,
I have a page where in the advance table I add few rows and save the transaction. First time when I save it everything works fine, but when I save it again without making any changes to the fields I get following error:
"Unable to perform transaction on the record. \nCause: The record has been deleted by another user. \nAction: Cancel the transaction and re-query the records to get the new data."
In the same page if I make any changes again it allows me to save the transaction.
Please guide how we can avoid it..
I have already checked many threads related to the issue but nothing has worked. Please help!!
Any help would be highly appreciated..
Regards,
Nisheeth

Hi All,
please help!!

Error in Mapping (Details: transaction SMW01)

Similar Messages

Maybe you are looking for