Error in my show and hide button prg
Hello Frnds,
With this link tutorial iam doing now but error raised , and tried my best plz check the tutorial and solve my prb
Method ONACTIONSHOW_HIDE
*THIS IS CODE FOR SHOW AND HIDE THE INPUT FIED BUT GETTING ERROR IS
**set_attribute_property doesnot exit similar ly get_attribute_property and set attribute is there like that getting error for this code
. DATA lo_nd_radio_node1 TYPE REF TO if_wd_context_node.
DATA lo_el_radio_node1 TYPE REF TO if_wd_context_element.
DATA lw_index TYPE I.
DATA lo_el_radio_node1_1 TYPE ref to if_wd_context_element.
navigate from <CONTEXT> to <RADIO_NODE1> via lead selection
lo_nd_radio_node1 = wd_context->get_child_node( name = wd_this->wdctx_radio_node1 ).* call method get lead selection index to get index
CALL METHOD lo_nd_radio_node1->get_lead_selection_index
receiving
index = lw_index. lo_el_radio_node1_1 = wd_context->get_element( ). If lw_index = 1. * call method set attribute property and pass value as 'X' to show
call method lo_el_radio_node1_1->set_attribute_property
exporting
attribute_name = 'FIRST_NAME_1'
property = 1
value = 'X'.
call method set attribute property and pass value as 'X' to show
call method lo_el_radio_node1_1->set_attribute_property
exporting
attribute_name = 'LAST_NAME_1'
property = 1
value = 'X'. Else. call method set attribute property and pass value as SPACE to HIDE*
call method lo_el_radio_node1_1->set_attribute_property
exporting
attribute_name = 'FIRST_NAME_1'
property = 1
value = space.* call method set attribute property and pass value as SPACE to HIDE
call method lo_el_radio_node1_1->set_attribute_property
exporting
attribute_name = 'LAST_NAME_1'
property = 1
value = space. Endif
Hi Ananth,
I tried the same code from that tutorial,its working fine.
once again check the name of the nodes and the elements.
you can try another way also to show and hide input fields.
create one attibute of type WDY_BOOLEAN and bind this attribute to the visible property of the input fields.
for example
attibute name = 'visible ' : type = wdy_boolean :default value = X
onaction of the radio button place the following code.it really works
DATA lo_el_context TYPE REF TO if_wd_context_element.
DATA ls_context TYPE wd_this->element_context.
DATA lv_visible TYPE wd_this->element_context-visible.
DATA lo_nd_radio_node1 TYPE REF TO if_wd_context_node.
DATA lo_el_radio_node1 TYPE REF TO if_wd_context_element.
DATA lw_index TYPE i.
DATA lo_el_radio_node1_1 TYPE REF TO if_wd_context_element.
lo_nd_radio_node1 = wd_context->get_child_node( name = wd_this->wdctx_radio_node1 ).
lo_el_context = wd_context->get_element( ).
CALL METHOD lo_nd_radio_node1->get_lead_selection_index
RECEIVING
index = lw_index.
lo_el_radio_node1_1 = wd_context->get_element( ).
IF lw_index = 1.
lo_el_context->set_attribute(
name = `VISIBLE`
value = 'X' ).
ELSE.
lo_el_context->set_attribute(
name = `VISIBLE`
value = ' ' ).
ENDIF.
Thanks,
krishna
Similar Messages
-
Show and Hide button based on PL/SQL or SQL return value ( Conditional Disp
Hi
I have a button on one of my pages.
It should be seen if the date field is entered.
It should not be seen if the date filed is null. I have procedure to return a boolean . How do I make button display conditional.
Any responses and hints appreciatedHi
I have a date field in the previous pages and when they enter date field in that form and submit, the date field value will be saved in the database. In the next page I want to check that date field and if the date field is entered in the previous page then only the button on my page should show up.
It's like if the date field in the database table is null ( if they donot enter in the previous page ) then in the next page my button should not be seen.
Thanks you for your response. -
Hi All,
I have the Requirement like :
I have two iframes side by side in a page, and two buttons show and hide,
once i click hide button second iframe should disappear and first one should be increase in size to fit whole window. and once i click show first and second should be 50/50 in the page
for this i followed below steps
1) created page.
2) created two report region (No Template)
3) In one region source i called iframe like
TABLE>
<TR>
<td>
<IFRAME SRC="http://Localhost:7777/pls/apex/f?p=&APP_ID.:&P104_INTERFACE.:&SESSION." WIDTH=&P104_WIDTH. HEIGHT=540 scrolling="auto" frameborder="1"></IFRAME>
</td>
</tr>
</table>
4) in second region
TABLE>
<TR>
<td>
<IFRAME SRC="www.google.com ; HEIGHT=540 scrolling="auto" frameborder="1"></IFRAME>
</td>
</tr>
</table>
6)conditionally showing the region with the help of SHOW and HIDE BUTTON
7)and also on Show and hide button i am setting the value of P104_WIDTH . So the size will vary with conditional display?
NOW MY QUESTION IS:
once i click hide button THE CONTENTS(item VALUES) OF THE FIRST FRAME ARE REFRESHED, DUE THAT ALL ENTERED DATA WIL DISAPPEAR SO HOW TO AVOID IT , without refreshing the frist frame i need to set the P104_width value so it interm width will set in the iframe region??????
Thanks & Regards
Nagaraj B KI had another idea that I am pursuing. I am looking into extending the current renderer CommandNavigationRenderer and will render another goLink just after the current goLink that will execute a close action. I was able to re-direct the rendering by added an override render-kit block in my current faces-config.xml file.
<render-kit>
<renderer>
<component-family>org.apache.myfaces.trinidad.Command</component-family>
<renderer-type>oracle.adf.rich.NavigationItem</renderer-type>
<renderer-class>com.riscs.ui.backing.jsp.components.ClosableCommandNavigationItemRenderer</renderer-class>
</renderer>
</render-kit>
If this works I am planning on extending the commandNavigationItem by creating a ClosableCommandNavigation tag and add a "closeAction" tag that will determine if a close item should render.
Preliminary work looks promising. I will update if I make progress...please let me know if I am crazy.
Thanks. -
I have a rather large JTable with a lot of columns that are updated once in a while.
Is there an easy way to show and hide columns, so that I don't have to keep track on which a shown and hide when I use setValueAt()...?JTable does the conversion between the column indexes of the view and the model.
You should be able to add remove columns using addColumn and removeColumn methods. and in the TableColumn class you can specify the coulmn in the model that the TableColumn refers to. -
Show and hide Lov icons and Date Picker image on conditional?
How to show and hide Lov icons and Date Picker image on conditional?
Why do you just want to make the icons conditional? Shouldn't the field also be conditional?
Patrick
My APEX Blog: http://inside-apex.blogspot.com
The ApexLib Framework: http://apexlib.sourceforge.net
The APEX Builder Plugin: http://sourceforge.net/projects/apexplugin/ -
SetVisible against show and hide
Hello, making some practises I have observed that setVisible method doesn't just makes visible or not, it affects me when I change location of components I have played with setVisible, but when I use deprecated methods hide and show I haven't that problem.
What else makes setVisible than make visible or not?Hello, the way I see it, setVisible is just a nicer way of setting visibility than show() and hide(). Anyway, the way setVisible is implemented in the Component class is :
public void setVisible(boolean b) {
show(b);
}So I don't believe you should be experiencing any difference between show() and setVisible(). As to the change in positions of components, you might find the actual implementation useful:
public void show(boolean b) {
if (b) {
show();
} else {
hide();
public void show() {
if (!visible) {
synchronized (getTreeLock()) {
visible = true;
ComponentPeer peer = this.peer;
if (peer != null) {
peer.show();
createHierarchyEvents(HierarchyEvent.HIERARCHY_CHANGED,
this, parent,
HierarchyEvent.SHOWING_CHANGED,
Toolkit.enabledOnToolkit(AWTEvent.HIERARCHY_EVENT_MASK));
if (peer instanceof LightweightPeer) {
repaint();
updateCursorImmediately();
if (componentListener != null ||
(eventMask & AWTEvent.COMPONENT_EVENT_MASK) != 0 ||
Toolkit.enabledOnToolkit(AWTEvent.COMPONENT_EVENT_MASK)) {
ComponentEvent e = new ComponentEvent(this,
ComponentEvent.COMPONENT_SHOWN);
Toolkit.getEventQueue().postEvent(e);
Container parent = this.parent;
if (parent != null) {
parent.invalidate();
}I left out the hide() code, since it is quite similar. Anyway, if you are interested in this code you can always look it up - it's avaliable.
Hope this helped, laginimaineb. -
Show and Hide Actions Not Working
I'm working on a project that involves showing and hiding objects. I inserted a button and in the Action block for the object, I selected 'Show', then selected the object I wanted to be shown on click. When I preview that screen in the project and select the button to show the object, it shows the object, but then advances the project to the next screen. The only way I've found to combat this apparent flaw is to use an advanced action for what should be a really simple interaction. Also, I have the timing set for all objects on the screen in question to Display for the rest of the slide. Is anyone else experiencing this issue?
Have a look at: Why choose Standard over Simple action? - Captivate blog
As Rick points out, Captivate has always worked that way. And since you are talking about Hide/Show, very often you'll want to hide a group before showing one object. If you are using Captivate 7/8 I recommend to create a shared action for that purpose that you can use over and over again in that project and in other projects.
Dare to Share - part 1 - Captivate blog
Reuse Shared Actions in other Projects - Captivate 7 vs. 8 - Captivate blog -
I am using a jFileChooser to save a file in a selected location and then I use a check if the file exist to prompt an overwrite option dialog box. I do this like so....
fileChooser.showSaveDialog(jPanel1);
File file = new File(fileChooser.getCurrentDirectory()+"/"+fileChooser.getName(fileChooser.getSelectedFile()) + ".jpg");
filename = file.getPath();
if (new File(filename).exists()) {
int n = JOptionPane.showConfirmDialog(this,
"Do you want to overwrite?", "File Overwrite",
JOptionPane.YES_NO_CANCEL_OPTION, JOptionPane.QUESTION_MESSAGE);
if (n == JOptionPane.NO_OPTION)
showme(flag);
}The question I have is, Upon entering a filename and location in the file chooser and clicking the save button the filechooser goes away, if that file already exist the JOptionPane shows and a choice can be made, I want the JOptionPane to prompt over top of the file chooser. Right now when clicking save the fileChooser goes away, then an overwrite option can be made, if it is no the savedialog reappears, Does anyone know how to keep the filechooser shown until a file save of a non-existing file is chosen or a no overwrite option i sshown.
BASICALLY: Does anyone know how to keep the filechooser component shown even when a optionPane component is shown? I don't want it to show and reshow.Why do you just want to make the icons conditional? Shouldn't the field also be conditional?
Patrick
My APEX Blog: http://inside-apex.blogspot.com
The ApexLib Framework: http://apexlib.sourceforge.net
The APEX Builder Plugin: http://sourceforge.net/projects/apexplugin/ -
Xcode-Show and Hide windows with checkbox?
I am making an applescript/cocoa application in Xcode 4.6. I in my Main Window, I have two windows that are hidden at launch ("Preferances", and "Advanced") and one window ("Simple") that is visible at launch. In the preferances window, I have a checkbox. I would like that box, when checked to display the "Simple" window, and Hide the "Advanced" window, and even when closed and relaunched, will remain how the preferances are, and not have to check the box everytime on startup of the app. Anyone know how to do this? Thanks!
Ok something isn't quit right
I in my Main Window, I have two windows that are hidden at launch ("Preferances", and "Advanced") and one window ("Simple") that is visible at launch. In the preferances window, I have a checkbox. I would like that box, when checked to display the "Simple" window, and Hide the "Advanced" window,
What do you mean by in the main window are two windows? Also if the checkbox is in the preferences window and that is hidden at launch how do you get to it to check/uncheck it?
This checkbox basically toggles between the two windows? selected it displays the 'simple' window, when unchecked it displays the "Advanced" window?
This script
script AppDelegate
property parent : class "NSObject"
property ppw : missing value
property isShowing : 0
on applicationWillFinishLaunching_(aNotification)
-- Insert code here to initialize your application before any files are opened
end applicationWillFinishLaunching_
on applicationShouldTerminate_(sender)
-- Insert code here to do any housekeeping before your application quits
return current application's NSTerminateNow
end applicationShouldTerminate_
on displayButton_(sender)
if (isShowing = 0) then
ppw's orderFront_(sender)
set isShowing to 1
else
ppw's orderOut_(sender)
set isShowing to 0
end
end
end script
will toggle a second window from a button on the firsst window.
This is what the nib file looks like
ppw is attached to the panel.
This should get you started. Post back if you have more questions. -
How to make a button show AND hide a field?
In an interactive form (with Adobe Acrobat X Pro), how can I purpose one button to:
1.) Show a field when clicked the first time
2.) Hide a field when clicked a second time
I seem to only be able to make a button do one or the other, but not both with the same button. Maybe an easier way to say this is I want to be able to have one button turn a field "on" and "off".
Any help would be GREATLY appreciated. Thanks!Use this code:
var f = this.getField("OtherFieldName");
if (f.display==display.visible) f.display = display.hidden;
else f.display=display.visible; -
Show and hide events in a dashboard widget
These two functions never seem to fire off. If the widget is hidden the hide function doesnt run and the show function only runs on the insitial load.
My problem here is that i am running a setinterval to perform a task every 30 seconds while visible and when the dashboard closes and the widget is hidden the timer still runs. I'd like it to stop and only start again when the widget shows, any ideas?I would use visible and includeInLayout properties
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui -
Dynamically show and hide detail columns according to master column value
i want to create a page where 2 level master detail.
that is main master region with search option for query (query region)
2nd detail with table
and 3rd detail. (1-2-3)
Here in 3rd detail region, some fields should be shown and some fields hide according to the value of one filed in 2nd detail table(for the current selected row).
please advice
or
please point me to any similar postsZam,
show/hide is only beneficial if its optioanl for user to hide or show the fields at your detail region.If it is not , you will have to use PPR and transient VO approach.
--Mukul -
Hello,
I've made a user interface with a little grafic description.
That description should change depending on user actions, e.g. if the user switches a button, some lines should disappear and some other lines should appear.
I thought some decorations could be shown and hidden via something like a property node, but that is not possible. Images can also not be hidden during execution of the program.
Is there any posibility to change a grafic user interface?
Johannes
LV 7.1
Greetings Johannes
Using LabVIEW 7.1 and 2009 recently
Attachments:
LV_Grafic.JPG 21 KBThanks to Tim for drawing what I suggested as option while I had some real work to do.
There is a trick of overcoming the index problem that was presented/devloped in the forum in the last month's:
You can place the decoration inside a cluster, so you can use the lable of the cluster to adress the decoration you want. The data type of the cluster doesn't mather for this, so you will hide the control/indicator. And you colour the cluster transparent (hint: right click with the coloring tool and use space to toggle).
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml -
How do I show and hide a popup message by the program
Hi,
I've the following problem. Sometime the program must wait to open a seriel port. On slow machines, this could take some seconds.
During this time I'll display a popup message with the message "please, be patient....".
After the port is open, the message should be hide by the program.
JOptionPane could be good, but without a "OK" button. Everthing should be controlled by the program.
I would implement the Runnable interface for the showing of the popup message.
Any ideas? Thanks in advance.
HansYou can use a JDialog... this will act like JOptionPane, but you can put on it whatever components you like... so no OK button!
For example:
JDialog dialog = new JDialog(parentFrame);
dialog.add(new JLabel("Please be patient", BorderLayout.CENTER);
dialog.pack();
dialog.setLocation(100,100);
dialog.setVisible(true);
dialog.setVisible(false); -
How to show and hide plots which are stacked and plotted on the one graph?
I am currently designing a Logic Analyser with 8 channels. These are plotted on a graph, stacked on top of each other. The user is able to select which plots he/she wishes to examine (i.e 1,4,6). I need to figure out how to hide the plots not required and show the plots needed.
Hi,
Did u say stacked?? then you must be using a chart not a graph
Nevertheless, as Unclebump has suggested, here is a Vi to give you an idea on how to use active plot and visible property nodes
Build on it to hide/show plots
Regards
Dev
Message Edited by devchander on 01-24-2006 06:09 AM
Attachments:
plot.vi 176 KB
Maybe you are looking for
-
Historical and transaction data in the same tables creates perf problems
Our Oracle based application is slow partly due to the fact that historical data are kept in the same table as transactional data. For example records about deceased patients, patients treated 5 years ago...etc, are kept in the one and only one patie
-
Since no window shows up asking where to download, etc as happens in other browsers (Opera) and in previous versions of Firefox, no able to click on a web site link to download a PDF file. Just goes to a blank page.
-
Have a problem download a free item in the apps store
can't access the app store ?
-
How do i get sand out of my iphone 5?
Got sand in there on the beach, now a few of my buttons don't work properly. Any ideas how to get it out?
-
How to can i sovle srvctl error....?
hi, my englist is very poor... (sorry... ) We system use rac srvctl command have some problem account : root root@db1:/> srvctl Usage: srvctl <command> <object> [<options>] command: enable|disable|start|stop|relocate|status|add|remove|modify|getenv|s