Error in Output messages

Hi
I was getting error repeatedly in output messages of contract.
Due to changes in a field in contract , an output message is getting triggered. But the message is not getting procressed and is in status :incorrectly processed". When i check the processing log,it shows the message of no changes relevant to Print.
My question is -Why the output message got generated when there are no relevant changes for Print?
-Where can i find which all field changes are relevant?
How can i avoid this repeated errors in the messages?

see SAP Note 28869 - Printout of changes although field not print-relevant
the fields can be customized for print relevance in OLME > messages > print relevant...

Similar Messages

Error in Output message for PO

Hello,
While saving Purchase Orders I get a warning in message type NEU for the Fax transmission for two particular vendors.When I select the line and check on 'Processing log' button, I see a message in popup as "Error in OPEN_FORM for (purchase order number)".
Please help.
Thanks,
Amit G

Hi Amit,
I have found some information that may assist us in determining the cause of your issue.
The error ME142 can have different causes like missing authorizations or a terminated connection. Please check SAP NOTE 397691. This note states that is errors occur when purchasing documents are output, the system generates an error message in the log of the message overview.
However, error message ME142 'Error in OPEN_FORM for document &' contain only the information that an error occurred and not the error cause. With the attached source code, the error cause is also displayed in the error message (for example, missing authorizations, terminated connection and so on).
If you apply the note then this will provide more detailed
information behind the problem you are having. Please apply this SAP note and then you can go further.
Sanjeev

Appcmd.exe add backup Output message: ERROR ( hresult:80070002, message:Command execution failed.

[04.01.2014 21:41:55.0743] [1] 0. ErrorRecord: System.InvalidOperationException: Running the command 'C:\Windows\system32\inetsrv\appcmd.exe add backup IISBackup130408621156784845' failed.
Output message: ERROR ( hresult:80070002, message:Command execution failed.
The system cannot find the file specified.
Error message:
Process exit code: 2.
[04.01.2014 21:41:55.0746] [1] [ERROR] The following error was generated when "$error.Clear();
configure-WSManIISHosting -EnableKerberosModule;
" was run: "Running the command 'C:\Windows\system32\inetsrv\appcmd.exe add backup IISBackup130408621156784845' failed.
Output message: ERROR ( hresult:80070002, message:Command execution failed.
The system cannot find the file specified.
Error message:
Process exit code: 2.".
[04.01.2014 21:41:55.0746] [1] [ERROR] Running the command 'C:\Windows\system32\inetsrv\appcmd.exe add backup IISBackup130408621156784845' failed.
Output message: ERROR ( hresult:80070002, message:Command execution failed.
The system cannot find the file specified.
BlatniS

Try this instead in an Elevated PowerShell
Import-Module WebAdministration
Backup-WebConfiguration -Name MyIISBackup
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Message received "error initializing output device"

I receive a message "error initializing output device" even after downloading the driver from HP that HP recommended. I had this error when I first bought Windows 7 and ended taking it off line and putting my old one with Windows XP back on line. My old printer (a Dell printer) worked with it. I bought a new HP printer and was sure it would work with Windows 7, but it doesn't. How can I fix Windows 7 so I can get rid of this frustrating error and make the printer work?

Hey jack0501, I see you are having an issue of device being busy and will not respond to print commands. There are a few steps I would advise performing to see if this can be resolved. First, I would advise performing a Hard Reset to the printer, restart the PC, and power cycle the network if this printer is network connected. Follow these steps to reset your HP printer, your wireless router, and your computer.Press the Power button on the HP printer to turn it off.Disconnect the power cord from the rear of the HP printer.Disconnect the power cord from the wireless router.Turn off the computer.Wait 30 seconds.Reconnect the power cord to the wireless router.Wait 30 seconds, or until the router is fully on and ready.Turn the computer back on.Wait for the computer to reload.Reconnect the power cord to the rear of the HP printer.Turn the printer back on.**Subsitute unplugging the USB cable for power cycling the Router if it is USB connected. Second, I would advise restarting the Print Spooler service on your PC after everything is power cycled and logged back in. Below is a link to a thread on restarting the print spooler service. http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/Restarting-the-Print-Spooler/td-p/2447413 Try to print again after performing these steps and let me know how it goes. Jason

Output message can not be created in a PO

Hi to you all,
Output message can not be created in a PO for a customer. During my tests, the yellow output message was created automatically after I have saved the PO.
I checked ME9F and the table NAST, there is no entry for the PO of the customer. This happens arbitrarily.
Do you know how and why this can happen? Is it a program error or something else?
Thanks.
Esra

Hi Esra,
if I do understand you correctly, when creating the PO the system always finds a message to be created ("yellow" message). But arbitrarily the message cannot be generated in ME9F, correct?
In my view, if the message is always determined correctly in the PO there cannot be any trouble concerning condition records, the error has to occur later in the process.
Are there any error messages in the processing protocol of a message that cannot be created? What happens if you set the transmission time-spot to 4 (immediatelly)?
Just my 2 cents
Alicia

Automatic output message generation for PO

Hi Forum,
I am getting below message while creating a PO, I want to set Automatic output message - (my output is by e mail). Please help...!!!
No message generated for output of purchasing document
Message no. 06261
Diagnosis
The system was not able to find a message record via the message determination schema. Therefore it was not possible for such a record to be generated for this purchasing document. In consequence, the purchasing document cannot be outputted (printed or transmitted).
Procedure
The message determination process should be checked and, if necessary, corrected.
The message record can be created manually for this document. For this purpose, choose the function "Messages" in the menu "Header" and maintain the necessary data.
Thanks & Regards,
Rohit Guliani

Hi Rohit,
You need to check that your print program is SAPFM06P and form as MEDRUCK.
Any testing should be done with this testing and once thus setting works, you may go back to your own program and form if you like. This helps a lot in identifying the area of error.
Please tell me you support pack level for SAP_APPL. It starts with SAPKH***** (like SAPKH46C08).
After that your help can be done.
- Sanjeev

File to RFC - error while processing message to remote system:com.sap.aii.

Hi
i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
could anyone help.

Hi
I am Facing Following Error When I am trying to call SAP Screen through JCO.jar
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
Please Guide Whethere it is possible to call SAP screen Through JCO.jar ot NOT
Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
Thanks
Vivek

Error while executing SSIS package - Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)

Hi,
We are getting the following error when running our SSIS packages on Microsoft SQL Server 2012 R2 on Windows Server 2008 R2 SP1:
Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)
SQL Server Data Tools and SQL Server Database Engine reside on the same server.
We tried the following:
Disabling TCP Chimney Offload
Installed Windows Server 2008 SP1
Splitting our SSIS code into multiple steps so it is not all one large continuous operation
The error occurs during a BulkDataLoad task.
Other options we are investigating with the engineering team (out-sourced, so delayed responses):
Firewall configurations (everything is local, so this should not make a difference)
Disabling the anti-virus scanner
Are there other things we can try?
Any insight is greatly appreciated.
Thanks!

Hi HenryKwan,
Based on the current information, the issue can be caused by many reasons. Please refer to the following tips:
Install the latest hotfix based on your SQL Server version. Ps: there is no SQL Server 2012 R2 version.
Change the MaxConcurrentExecutables property from -1 to another one based on the MAXDOP. For example, 8.
Set "RetainSameConnection" Property to FALSE on the all the connection managers.
Reference:
https://connect.microsoft.com/SQLServer/feedback/details/774370/ssis-packages-abort-with-unexpected-termination-message
If the issue is still existed, as Jakub suggested, please provide us more information about this issue.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Jdev11.1.1.6.0-Error while translating message to native format-FileWrite

Im reading a file from a service and transforming the data and writing them into a file through the external reference using a Mediator component.
I have no problem while building or deploying.
But while executing I get an error as follows:
Non Recoverable System Fault :
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'WriteAppointmentRequestInLogFile' failed due to: Translation Error. Translation Error. Error while translating message to native format. Please make sure that the payload for the outbound interaction conforms to the schema. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
My input is a File Adpater Read operation and output is File Adapter Write operation.
The schemas are as below:
Input schema:
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://stmatthews.hospital.com/ReadFileDoctorsAppointmentRequest"
targetNamespace="http://stmatthews.hospital.com/ReadFileDoctorsAppointmentRequest"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII"
<xsd:element name="doctorAppointmentRequestRoot"><xsd:complexType>
<xsd:sequence>
<xsd:element name="doctorAppointmentRequest" minOccurs="1" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="C1" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C2" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C3" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C4" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C5" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C6" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C7" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C8" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C9" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C10" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C11" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C12" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C13" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C14" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C15" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
Output Schema:
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://stmatthews.hospital.com/LogDoctorAppointmentRequests"
targetNamespace="http://stmatthews.hospital.com/LogDoctorAppointmentRequests"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII"
<xsd:element name="AppointmentRequestsLog"><xsd:complexType>
<xsd:sequence>
<xsd:element name="AppointmentRequest" minOccurs="1" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="C1" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C2" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C3" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C4" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C5" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C6" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C7" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C8" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C9" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>


Transformation XSL used in Mediator:
<?xml version="1.0" encoding="UTF-8" ?>
<xsl:stylesheet version="1.0"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/file/DoctorsAppointmentRequestProcessor/DoctorAppointmentRequestProcessor/ReadFileDoctorsAppointmentRequest"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:bpel="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:pc="http://xmlns.oracle.com/pcbpel/"
xmlns:bpm="http://xmlns.oracle.com/bpmn20/extensions"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:socket="http://www.oracle.com/XSL/Transform/java/oracle.tip.adapter.socket.ProtocolTranslator"
xmlns:mhdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.mediator.service.common.functions.MediatorExtnFunction"
xmlns:oraext="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:imp1="http://stmatthews.hospital.com/ReadFileDoctorsAppointmentRequest"
xmlns:dvm="http://www.oracle.com/XSL/Transform/java/oracle.tip.dvm.LookupValue"
xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
xmlns:med="http://schemas.oracle.com/mediator/xpath"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
xmlns:ns1="http://stmatthews.hospital.com/LogDoctorAppointmentRequests"
xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:xdk="http://schemas.oracle.com/bpel/extension/xpath/function/xdk"
xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:bpmn="http://schemas.oracle.com/bpm/xpath"
xmlns:ns0="http://xmlns.oracle.com/pcbpel/adapter/file/DoctorsAppointmentRequestProcessor/DoctorAppointmentRequestProcessor/LogDoctorAppointmentRequests"
xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
exclude-result-prefixes="xsi xsl tns pc plt wsdl imp1 jca xsd ns1 ns0 xp20 bpws bpel bpm ora socket mhdr oraext dvm hwf med ids xdk xref bpmn ldap">
<xsl:template match="/">
<ns1:AppointmentRequestsLog>
<ns1:AppointmentRequest>
<ns1:C1>
<xsl:value-of select="xp20:current-date()"/>
</ns1:C1>
<ns1:C2>
<xsl:value-of select='substring-before("doctor1234_20120926_helloworld","_")'/>
</ns1:C2>
<ns1:C4>
<xsl:value-of select="concat(/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C2,/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C3)"/>
</ns1:C4>
<ns1:C5>
<xsl:value-of select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C4"/>
</ns1:C5>
<ns1:C6>
<xsl:value-of select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C5"/>
</ns1:C6>
<ns1:C7>
<xsl:value-of select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C12"/>
</ns1:C7>
<ns1:C8>
<xsl:value-of select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C14"/>
</ns1:C8>
<ns1:C9>
<xsl:value-of select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C15"/>
</ns1:C9>
</ns1:AppointmentRequest>
</ns1:AppointmentRequestsLog>
</xsl:template>
</xsl:stylesheet>
Just in case if you are aware, Im trying the example in Lucas Jellema's book Chapter 7 and Im getting the error there in the first example project.
I have seen few very old threads on this problem in the forum but none of them had any answers so opening up a new one.
Thanks.

Your transformation with for-each look is incorrect.
This is what you have right now:
<ns1:AppointmentRequestsLog>
<xsl:for-each select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest">
<ns1:AppointmentRequest>
<ns1:C1>
<xsl:value-of select="xp20:current-date()"/>
</ns1:C1>
<ns1:C2>
<xsl:value-of select='substring-before("doctor1234_20120926_helloworld","_")'/>
</ns1:C2>
<ns1:C3>
<xsl:value-of select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C2"/>
</ns1:C3>This is the correct way to write for-each within XSLT:
<ns1:AppointmentRequestsLog>
<xsl:for-each select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest">
<ns1:AppointmentRequest>
<ns1:C1>
<xsl:value-of select="xp20:current-date()"/>
</ns1:C1>
<ns1:C2>
<xsl:value-of select='substring-before("doctor1234_20120926_helloworld","_")'/>
</ns1:C2>
<ns1:C3>
<xsl:value-of select="imp1:C2"/>
</ns1:C3>Also, check the flow trace in the EM console for the instance which errored out and paste here the data which is being sent to the FileWrite Adapter. Also, you need to ensure that any elements which are defined as xs:int should not have empty string as values. For example in your write schema C3 has int. So you should map C3 in XSLT like following:
<xsl:choose>
<xsl:when test="imp1:C2 and string-length(imp1:C2) > 0">
<ns1:C3>
<xsl:value-of select="imp1:C2"/>
</ns1:C3>
</xsl:when>
<xsl:otherwise>
<ns1:C3>0</ns1:C3>
</xsl:otherwise>
</xsl:choose>

Capturing error records and messages in BDC ?

Hi Experts,
I am recording a infotype using BDC recording and I got successfull updation in recording.But I dont want the output message generated by BDC recording which is obtained by perform bdc_transaction using 'pa30' generated by recording.
I want to capture the success pernr values and its correponding messages in a seperate internal table.Then want to capture error pernr values and its messages in a seperate internal table.
Give me sample coding to fetch those values. Think that my internal table which contains pernr values for recording is int_0007.from this internal table I am recording values.Give me coding to collect success anf error pernr values and its messges in seperate internal table.
Thanks,
Sakthi.C
*Assure points for valuable answers*
Message was edited by:
        Sakthi Saravanan C

DATA : BEGIN OF T_UPLOAD OCCURS 0,
         MATNR LIKE MARA-MATNR,
         MAKTX LIKE MAKT-MAKTX,
         PLANT LIKE RMMG1-WERKS,
       END OF T_UPLOAD.
DATA : BEGIN OF T_DOWNLOAD OCCURS 0,
         MATNR LIKE MARA-MATNR,
         MAKTX LIKE MAKT-MAKTX,
         PLANT LIKE RMMG1-WERKS,
         MSG(200),
       END OF T_DOWNLOAD.
DATA : T_BDCMSGCOLL TYPE TABLE OF BDCMSGCOLL WITH HEADER LINE.
DATA : WA_BDCMSGCOLL TYPE BDCMSGCOLL.
DATA : ERR_LOG TYPE MESSAGE.
Set the parameters for Call Transaction
CLEAR WA_CTU_PARAMS.
WA_CTU_PARAMS-DISMODE = 'N'.
WA_CTU_PARAMS-UPDMODE = 'S'.
WA_CTU_PARAMS-NOBINPT = 'X'.
WA_CTU_PARAMS-NOBIEND = 'X'.
WA_CTU_PARAMS-DEFSIZE = 'X'.
Call Transaction MM01
IF W_FLAG NE 'X'.
    <b>CALL TRANSACTION 'MM01' USING T_BDCDATA OPTIONS FROM WA_CTU_PARAMS
                                             MESSAGES INTO T_BDCMSGCOLL.
    COMMIT WORK AND WAIT.</b>
    DESCRIBE TABLE T_BDCMSGCOLL LINES N.
    IF N <> 0.
      LOOP AT T_BDCMSGCOLL INTO WA_BDCMSGCOLL.
        CLEAR ERR_LOG.
        W_MSGNO = WA_BDCMSGCOLL-MSGNR.
        CALL FUNCTION <b>'WRITE_MESSAGE'</b>          EXPORTING
            MSGID = WA_BDCMSGCOLL-MSGID
            MSGNO = W_MSGNO
            MSGTY = WA_BDCMSGCOLL-MSGTYP
          IMPORTING
            MESSG = ERR_LOG.
Error that occurs during transactoon
        IF ERR_LOG-MSGTY = 'E'.
          MOVE-CORRESPONDING T_UPLOAD TO T_DOWNLOAD.
          MOVE ERR_LOG-MSGTX TO T_DOWNLOAD-MSG.
          APPEND T_DOWNLOAD.
        ENDIF.
      ENDLOOP.
    ENDIF.
ENDIF.
regards
vinod

RFC system error: Screen output without connection to user

After running transaction SMWP, we nagivate to the "Parameters for object load management" node using the following path:
Runtime Information -> Adapter Status Information -> Parameters in R/3 Backend(s) -> ECC -> Parameters for object load management
Under the node Parameters for object load management, when we double click any of the entries we receive the following error message in the form of a pop-up: RFC system error: Screen output without connection to user.
Has anyone encountered the aforementioned error?

Hi,
while creating the syncbo you have to give the RFC destination for corresponding Bapi wrappers
so plz check that.
and can you please explain the exact error in detail and add the trace..
Regards
Manohar

Error While processing Message-Message no. VL086

Dear All,
While Processing Outbound delivery in VL02N i am getting the below following error message.
Please help me out.
Error msg - output could not be issued.
Message no. VL086
Diagnosis
An error occurred in the message processing program.
Regards,
Nagaraj S

Hi AP,
It is giving output in all other login, we check the authorization also.It is not having anyproblem with all others.
Pls help me out.
Regards,
Nagaraj S

External Drive Disk Erase Failed with the Error Input/Output Error

I have 2 hard drives in an external FW800 enclosure that I am unable to format. When I go to initialize the drives in Disk Utility, I get the following error message: "Disk Erase failed with the error: Input/output error."
The drives show up in Disk Utility, but I can't repair them (that option is grayed out). Disk Utility correctly ID's the manufacturer of the drives (Maxtor), their size (200gb each), so it's obviously seeing that the drives are there. But it won't let me format them.
The drives are new, by the way; they don't have any data/files on them. I have Disk Warrior, but the drives don't show up there to be repaired -- probably because they aren't formatted yet.
After looking at other posts, I tried switching the jumper settings around on the drives -- from Master/Slave to cable select and back again, but it didn't help. I also tried doing a zero erase (even though the drives are new), zapping the PRAM -- again, no help.
One question I had is whether this could be a bad FW800 cable? The cable is new -- it came with the enclosure, which is an OWC Dual FW 800 enclosure. Other than that, does anyone have any other thoughts about what's causing this? Any help would be greatly appreciated.
Matthew

SOLUTION!!!!
I had the exact same problem. I have the original 20 GB hard drive that came in my Powerbook G4 550MHz and a couple of years ago I traded up for a 60 GB drive and bought a FW/USB enclosure for my original drive to use it to backup my important files. I hadn't backed up in over a year (shame on me!) and I decided maybe I should erase the drive and start from scratch. It was connected via USB.
At that point DiskUtility gave me the exact same Input/Output error. I tried partitioning the drive into 1 or more partitions but came up with the same error. I couldn't figure out what was wrong so I decided to startup in OS 9.2.2, I did that and let it start up, then plugged in the hard drive and it gave me the standard "This disk is unrecognizable, do you want to eject or erase?" so I clicked Initalize. It worked!
Just make sure you choose the MacOS Extended option when initializing out of OS 9 (instead of the MacOS Standard option) so it can be read and viewed in OS X.
If your computer is too new to be able to boot from an OS 9 folder on your drive or an OS 9 CD, then see if a friend or a local library has older computers that are running OS 9 or can boot from it. If not let me know and you can send me your drive and I'll reformat it.
Kind of crazy...I haven't used the OS 9 partition on my HD in YEARS...was even thinking about erasing it since I don't use any Classic applications anymore...good thing I didn't!
Nick
Powerbook G4 550Mhz Mac OS X (10.4.6)

Restrict Purchase Order to generate custom output message on condition.

Hi Experts,
We have custom message / output types ZEMA(E-Mail) & ZNEU(Standard Mail) configured for Purchase Orders.
We have a requirement from client to restrict the generation of output message ZEMA, if the amount of the PO is greater than some limit say 100USD. And the message output should also be avoided to create entry in ME9F.
Can you please advise if there are some way (User Exit?) that prevent the output message in this scenario (specific PO Type) without touching the current Condition setup?
Here I would need the new PO object being created and the amount on the PO from the field NETWR.
Thanks,
Ankur

Hi Jurgen,
Sorry for missing out the Dump details earlier.Please find below an extract from the dump:
Category               ABAP Programming Error
Runtime Errors         POSTING_ILLEGAL_STATEMENT
ABAP Program           FRMSCM0012
Application Component Not assigned
Date and Time          10.06.2014 08:30:46
Error analysis
     There is probably an error in the program
     "FRMSCM0012".
     This program is triggered in the update process. The following ABAP
     statements are illegal here:
     - CALL SCREEN
     - CALL DIALOG
     - CALL TRANSACTION
     - SET SCREEN
     - LEAVE TO LIST-PROCESSING
     - SUBMIT
     - LEAVE SCREEN
     - LEAVE LIST-PROCESSING
     - LEAVE PROGRAM
     - LEAVE TO TRANSACTION
     - MESSAGE I/W/E (if not handeld using EXCEPTIONS ERROR_MESSAGE)
     - MESSAGE A
How to correct the error
     Probably the only way to eliminate the error is to correct the program.
If the error occurs in a non-modfied SAP program, you might be able to
find a solution in the SAP Notes system. If you have access to the SAP
Notes system, check there first using the following keywords:
"POSTING_ILLEGAL_STATEMENT"
"FRMSCM0012" bzw. FRMSCM0012_SF
"SFORM_PRINT_OUTPUT"
Information on where terminated
    The termination occurred in ABAP program "FRMSCM0012", in
     "SFORM_PRINT_OUTPUT". The main program
    was "RSM13000 ".

Purchase Order going to Dump if Output Message has Dispatch Time 4

Hi All,
We are getting a Runtime Error while saving or changing any Purhase Order, if the Output Message has Dispatch Time maintained as 4 i.e. Send Immediately.
For all other dispatch time there is no issue. We have maintained condition record for the Message Type with Print Medium as 1 and Dispatch Time as 4. Also, the printer is maintained in the communication tab.
No printer is maintained as default in the User Profile. No Printer is assigned to purchasing group. Our requirement is to print on the printer specified in the Condition Records itself.
We are using Smartform, not standard SAP script for printing.
Please suggest how we can rectify this issue.
Regards,
Ankit

Hi Jurgen,
Sorry for missing out the Dump details earlier.Please find below an extract from the dump:
Category               ABAP Programming Error
Runtime Errors         POSTING_ILLEGAL_STATEMENT
ABAP Program           FRMSCM0012
Application Component Not assigned
Date and Time          10.06.2014 08:30:46
Error analysis
     There is probably an error in the program
     "FRMSCM0012".
     This program is triggered in the update process. The following ABAP
     statements are illegal here:
     - CALL SCREEN
     - CALL DIALOG
     - CALL TRANSACTION
     - SET SCREEN
     - LEAVE TO LIST-PROCESSING
     - SUBMIT
     - LEAVE SCREEN
     - LEAVE LIST-PROCESSING
     - LEAVE PROGRAM
     - LEAVE TO TRANSACTION
     - MESSAGE I/W/E (if not handeld using EXCEPTIONS ERROR_MESSAGE)
     - MESSAGE A
How to correct the error
     Probably the only way to eliminate the error is to correct the program.
If the error occurs in a non-modfied SAP program, you might be able to
find a solution in the SAP Notes system. If you have access to the SAP
Notes system, check there first using the following keywords:
"POSTING_ILLEGAL_STATEMENT"
"FRMSCM0012" bzw. FRMSCM0012_SF
"SFORM_PRINT_OUTPUT"
Information on where terminated
    The termination occurred in ABAP program "FRMSCM0012", in
     "SFORM_PRINT_OUTPUT". The main program
    was "RSM13000 ".

Error in Output messages

Similar Messages

Maybe you are looking for